[Dovecot] Cannot get dovecot-sieve to work
Nick Lunt
nick.lunt at patech-solutions.com
Thu Jan 28 12:30:15 EET 2010
> -----Original Message-----
> From: dovecot-bounces+nick.lunt=patech-solutions.com at dovecot.org
> [mailto:dovecot-bounces+nick.lunt=patech-solutions.com at dovecot.org] On
> Behalf Of Nick Lunt
> Sent: 28 January 2010 08:50
> To: dovecot at dovecot.org
> Subject: Re: [Dovecot] Cannot get dovecot-sieve to work
>
> > -----Original Message-----
> > From: Tom Hendrikx [mailto:tom at whyscream.net]
> > Sent: 27 January 2010 15:53
> > To: Nick Lunt; dovecot at dovecot.org
> > Subject: Re: [Dovecot] Cannot get dovecot-sieve to work
>
>
> > Your sieve file will be processed at delivery time, when the MTA
> (f.i.
> > postfix) will hand off mail to the dovecot LDA, deliver. Your log
> file
> > shows only activity about an IMAP login. This has no use in
debugging
> > your problem.
> >
> > 1. Check your MTA config and see if it calls deliver
> > 2. Send yourself a mail
> > 3. Check MTA logs and see if handing the mail to deliver works as
> > intended
> > 4. Check dovecot logs for activity from deliver.
>
> Were using sendmail as the MTA.
> I have edited sendmail.cf as documented at
> http://wiki.dovecot.org/LDA/Sendmail. However this documentation
states
> the following:
>
> "The following describes how to configure Sendmail to use deliver
where
> root permission is not granted and Dovecot runs under a single user
ID.
> It may need some adjustment for more typical setups. Other assumptions
> are that Sendmail is configured for virtual hosting and that
> local-system mail delivery is not handled by deliver."
>
> Our sendmail setup is not configured for virtual hosting.
>
> Here is what I have put in sendmail.cf
>
> Mdovecot, P=/usr/libexec/dovecot/deliver, F=DFMPhnu9,
> S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP/HdrFromSMTP,
> T=DNS/RFC822/X-Unix,
> A=deliver -d $u
>
> I restarted both sendmail and dovecot but still my test emails do not
> get processed by dovecot/dovecot-sieve. There is nothing in the
dovecot
> or sendmail logs pointing to dovecot-sieve.
>
> All I want to do is discard mail depending on the subject.
Right, I've ditched sendmail and were now running postfix.
Here's my .dovecot.sieve
require "fileinto";
if not header :contains "subject" "ORG:11" {
fileinto "discard";
stop;
}
When I send a mail without "ORG:11" in the header, the mail goes into
the discard folder, great.
However when I send a mail with "ORG:11" in the header I get the
following error:
==> /var/log/maillog <==
Jan 28 12:36:26 psl-dev sendmail[16599]: o0SCaQAX016599: from=nickl,
size=31, class=0, nrcpts=1,
msgid=<201001281236.o0SCaQAX016599 at psl-dev.patech-solutions.com>,
relay=nickl at localhost
Jan 28 12:36:26 psl-dev postfix/smtpd[16600]: connect from
localhost.localdomain[127.0.0.1]
Jan 28 12:36:26 psl-dev postfix/smtpd[16600]: B1BC9194D63:
client=localhost.localdomain[127.0.0.1]
Jan 28 12:36:26 psl-dev postfix/cleanup[16603]: B1BC9194D63:
message-id=<201001281236.o0SCaQAX016599 at psl-dev.patech-solutions.com>
Jan 28 12:36:26 psl-dev postfix/qmgr[16096]: B1BC9194D63:
from=<nickl at psl-dev.patech-solutions.com>, size=600, nrcpt=1 (queue
active)
Jan 28 12:36:26 psl-dev sendmail[16599]: o0SCaQAX016599: to=nickl,
ctladdr=nickl (503/503), delay=00:00:00, xdelay=00:00:00, mailer=relay,
pri=30031, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (Ok:
queued as B1BC9194D63)
Jan 28 12:36:26 psl-dev postfix/smtpd[16600]: disconnect from
localhost.localdomain[127.0.0.1]
Jan 28 12:36:26 psl-dev postfix/local[16604]: B1BC9194D63:
to=<nickl at psl-dev.patech-solutions.com>, relay=local, delay=0.06,
delays=0.05/0/0/0.01, dsn=4.3.0, status=deferred (temporary failure)
==> /var/log/dovecot.log <==
Jan 28 12:36:26 deliver(nickl): Info: Loading modules from directory:
/usr/lib/dovecot/lda
Jan 28 12:36:26 deliver(nickl): Info: Module loaded:
/usr/lib/dovecot/lda/lib90_sieve_plugin.so
Jan 28 12:36:26 deliver(nickl): Info: mbox:
data=/home/nickl/mail:INBOX=/var/mail/nickl
Jan 28 12:36:26 deliver(nickl): Info: fs: root=/home/nickl/mail, index=,
control=, inbox=/var/mail/nickl
Jan 28 12:36:26 deliver(nickl): Info: sieve: using sieve path for user's
script: /home/nickl/.dovecot.sieve
Jan 28 12:36:26 deliver(nickl): Info: sieve: opening script
/home/nickl/.dovecot.sieve
Jan 28 12:36:26 deliver(nickl): Info: sieve: executing compiled script
/home/nickl/.dovecot.sieve
Jan 28 12:36:26 deliver(nickl): Error:
file_dotlock_create(/var/mail/nickl) failed: Permission denied
(euid=503(nickl) egid=503(nickl) missing +w perm: /var/mail) (set
mail_privileged_group=mail)
Jan 28 12:36:26 deliver(nickl): Error: sieve:
msgid=<201001281236.o0SCaQAX016599 at psl-dev.patech-solutions.com>: failed
to store into mailbox 'INBOX': Internal error occurred. Refer to server
log for more information. [2010-01-28 12:36:26]
Jan 28 12:36:26 deliver(nickl): Error: sieve: script
/home/nickl/.dovecot.sieve failed with unsuccessful implicit keep
Here are the permissions on /var/mail/
# ls -ld /var/spool/mail
drwxrwxr-x 2 root mail 4096 Jan 28 11:02 /var/spool/mail
# ls -l /var/mail/
total 528
-rw-rw---- 1 nickl mail 0 Jan 28 11:02 nickl
-rw------- 1 root root 517203 Jan 28 04:02 root
Here is dovecot -n
# dovecot -n
# 1.2.10: /etc/dovecot.conf
# OS: Linux 2.6.18-128.el5 x86_64 Red Hat Enterprise Linux Server
release 5.3 (Tikanga)
log_path: /var/log/dovecot.log
info_log_path: /var/log/dovecot.log
ssl: no
login_dir: /var/run/dovecot/login
login_executable(default): /usr/libexec/dovecot/imap-login
login_executable(imap): /usr/libexec/dovecot/imap-login
login_executable(pop3): /usr/libexec/dovecot/pop3-login
mail_access_groups: mail
mail_privileged_group: mail
mail_location: mbox:~/mail:INBOX=/var/mail/%u
mail_debug: yes
mail_executable(default): /usr/libexec/dovecot/imap
mail_executable(imap): /usr/libexec/dovecot/imap
mail_executable(pop3): /usr/libexec/dovecot/pop3
mail_plugin_dir(default): /usr/lib/dovecot/imap
mail_plugin_dir(imap): /usr/lib/dovecot/imap
mail_plugin_dir(pop3): /usr/lib/dovecot/pop3
lda:
postmaster_address: root at localhost
mail_plugins: sieve
auth default:
debug: yes
passdb:
driver: pam
userdb:
driver: passwd
plugin:
sieve: ~/.dovecot.sieve
sieve_dir: ~/
log_path: /var/log/dovecot.log
Many thanks,
Nick.
__________ Information from ESET NOD32 Antivirus, version of virus
signature database 4813 (20100128) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
More information about the dovecot
mailing list