sieve sending vacation message from vmail at ns1.domain.tld
Matthew Broadhead
matthew.broadhead at nbmlaw.co.uk
Wed Nov 2 17:29:39 UTC 2016
is there something more i need to be doing my end?
On 25/10/2016 09:11, Matthew Broadhead wrote:
> are there any instructions or tests i can make to check the sieve
> configuration? or does the magic all happen internally and there are
> no settings to change?
>
> On 21/10/2016 10:22, Matthew Broadhead wrote:
>> the server is using CentOS 7 and that is the package that comes
>> through yum. everything is up to date. i am hesitant to install a
>> new package manually as that could cause other compatibility issues?
>> is there another way to test the configuration on the server?
>>
>> On 21/10/2016 01:07, Stephan Bosch wrote:
>>> Op 10/20/2016 om 7:38 PM schreef Matthew Broadhead:
>>>> do i need to provide more information?
>>>>
>>> It still doesn't make sense to me. I do notice that the version you're
>>> using is ancient (dated 26-09-2013), which may well the problem.
>>>
>>> Do have the ability to upgrade?
>>>
>>> Regards,
>>>
>>> Stephan.
>>>
>>>> On 19/10/2016 14:49, Matthew Broadhead wrote:
>>>>> /var/log/maillog showed this
>>>>> Oct 19 13:25:41 ns1 postfix/smtpd[1298]: 7599A2C19C6:
>>>>> client=unknown[127.0.0.1]
>>>>> Oct 19 13:25:41 ns1 postfix/cleanup[1085]: 7599A2C19C6:
>>>>> message-id=<edc55a9b-eb49-3945-dc60-0e1d51a78e97 at nbmlaw.co.uk>
>>>>> Oct 19 13:25:41 ns1 postfix/qmgr[1059]: 7599A2C19C6:
>>>>> from=<matthew.broadhead at nbmlaw.co.uk>, size=3190, nrcpt=1 (queue
>>>>> active)
>>>>> Oct 19 13:25:41 ns1 amavis[32367]: (32367-17) Passed CLEAN
>>>>> {RelayedInternal}, ORIGINATING LOCAL [80.30.255.180]:54566
>>>>> [80.30.255.180] <matthew.broadhead at nbmlaw.co.uk> ->
>>>>> <ufuk.koksal at nbmlaw.co.uk>, Queue-ID: BFFA62C1965, Message-ID:
>>>>> <edc55a9b-eb49-3945-dc60-0e1d51a78e97 at nbmlaw.co.uk>, mail_id:
>>>>> TlJQ9xQhWjQk, Hits: -2.9, size: 2235, queued_as: 7599A2C19C6,
>>>>> dkim_new=foo:nbmlaw.co.uk, 531 ms
>>>>> Oct 19 13:25:41 ns1 postfix/smtp[1135]: BFFA62C1965:
>>>>> to=<ufuk.koksal at nbmlaw.co.uk>, relay=127.0.0.1[127.0.0.1]:10026,
>>>>> delay=0.76, delays=0.22/0/0/0.53, dsn=2.0.0, status=sent (250 2.0.0
>>>>> from MTA(smtp:[127.0.0.1]:10027): 250 2.0.0 Ok: queued as
>>>>> 7599A2C19C6)
>>>>> Oct 19 13:25:41 ns1 postfix/qmgr[1059]: BFFA62C1965: removed
>>>>> Oct 19 13:25:41 ns1 postfix/smtpd[1114]: connect from
>>>>> ns1.nbmlaw.co.uk[217.174.253.19]
>>>>> Oct 19 13:25:41 ns1 postfix/smtpd[1114]: NOQUEUE: filter: RCPT from
>>>>> ns1.nbmlaw.co.uk[217.174.253.19]: <vmail at ns1.nbmlaw.co.uk>: Sender
>>>>> address triggers FILTER smtp-amavis:[127.0.0.1]:10026;
>>>>> from=<vmail at ns1.nbmlaw.co.uk> to=<matthew.broadhead at nbmlaw.co.uk>
>>>>> proto=SMTP helo=<ns1.nbmlaw.co.uk>
>>>>> Oct 19 13:25:41 ns1 postfix/smtpd[1114]: 8A03F2C1965:
>>>>> client=ns1.nbmlaw.co.uk[217.174.253.19]
>>>>> Oct 19 13:25:41 ns1 postfix/cleanup[1085]: 8A03F2C1965:
>>>>> message-id=<dovecot-sieve-1476879941-491779-0 at ns1.nbmlaw.co.uk>
>>>>> Oct 19 13:25:41 ns1 opendmarc[2430]: implicit authentication service:
>>>>> ns1.nbmlaw.co.uk
>>>>> Oct 19 13:25:41 ns1 opendmarc[2430]: 8A03F2C1965: ns1.nbmlaw.co.uk
>>>>> fail
>>>>> Oct 19 13:25:41 ns1 postfix/qmgr[1059]: 8A03F2C1965:
>>>>> from=<vmail at ns1.nbmlaw.co.uk>, size=1077, nrcpt=1 (queue active)
>>>>> Oct 19 13:25:41 ns1 postfix/smtpd[1114]: disconnect from
>>>>> ns1.nbmlaw.co.uk[217.174.253.19]
>>>>> Oct 19 13:25:41 ns1 sSMTP[1895]: Sent mail for vmail at ns1.nbmlaw.co.uk
>>>>> (221 2.0.0 Bye) uid=996 username=vmail outbytes=971
>>>>> Oct 19 13:25:41 ns1 postfix/smtpd[1898]: connect from
>>>>> unknown[127.0.0.1]
>>>>> Oct 19 13:25:41 ns1 postfix/pipe[1162]: 7599A2C19C6:
>>>>> to=<ufuk.koksal at nbmlaw.co.uk>, relay=dovecot, delay=0.46,
>>>>> delays=0/0/0/0.45, dsn=2.0.0, status=sent (delivered via dovecot
>>>>> service)
>>>>> Oct 19 13:25:41 ns1 postfix/qmgr[1059]: 7599A2C19C6: removed
>>>>> Oct 19 13:25:41 ns1 postfix/smtpd[1898]: E53472C19C6:
>>>>> client=unknown[127.0.0.1]
>>>>> Oct 19 13:25:41 ns1 postfix/cleanup[1085]: E53472C19C6:
>>>>> message-id=<dovecot-sieve-1476879941-491779-0 at ns1.nbmlaw.co.uk>
>>>>> Oct 19 13:25:41 ns1 postfix/qmgr[1059]: E53472C19C6:
>>>>> from=<vmail at ns1.nbmlaw.co.uk>, size=1619, nrcpt=1 (queue active)
>>>>> Oct 19 13:25:41 ns1 amavis[1885]: (01885-01) Passed CLEAN
>>>>> {RelayedInternal}, ORIGINATING LOCAL [217.174.253.19]:40960
>>>>> [217.174.253.19] <vmail at ns1.nbmlaw.co.uk> ->
>>>>> <matthew.broadhead at nbmlaw.co.uk>, Queue-ID: 8A03F2C1965, Message-ID:
>>>>> <dovecot-sieve-1476879941-491779-0 at ns1.nbmlaw.co.uk>, mail_id:
>>>>> mOMO97yjVqjM, Hits: -2.211, size: 1301, queued_as: E53472C19C6,
>>>>> 296 ms
>>>>> Oct 19 13:25:41 ns1 postfix/smtp[1217]: 8A03F2C1965:
>>>>> to=<matthew.broadhead at nbmlaw.co.uk>,
>>>>> relay=127.0.0.1[127.0.0.1]:10026, delay=0.38, delays=0.08/0/0/0.29,
>>>>> dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10027):
>>>>> 250 2.0.0 Ok: queued as E53472C19C6)
>>>>> Oct 19 13:25:41 ns1 postfix/qmgr[1059]: 8A03F2C1965: removed
>>>>> Oct 19 13:25:42 ns1 postfix/pipe[1303]: E53472C19C6:
>>>>> to=<matthew.broadhead at nbmlaw.co.uk>, relay=dovecot, delay=0.14,
>>>>> delays=0/0/0/0.14, dsn=2.0.0, status=sent (delivered via dovecot
>>>>> service)
>>>>> Oct 19 13:25:42 ns1 postfix/qmgr[1059]: E53472C19C6: removed
>>>>>
>>>>> On 19/10/2016 13:54, Stephan Bosch wrote:
>>>>>>
>>>>>> Op 19-10-2016 om 13:47 schreef Matthew Broadhead:
>>>>>>> i am not 100% sure how to give you the information you require.
>>>>>>>
>>>>>>> my current setup in /etc/postfix/master.cf is
>>>>>>> flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -d
>>>>>>> ${recipient}
>>>>>>> so recipient would presumably be user at domain.tld? or do you want
>>>>>>> the real email address of one of our users? is there some way i
>>>>>>> can output this information directly e.g. in logs?
>>>>>> I am no Postfix expert. I just need to know which values are being
>>>>>> passed to dovecot-lda with what options. I'd assume Postfix allows
>>>>>> logging the command line or at least the values of these variables.
>>>>>>
>>>>>>> the incoming email message could be anything? again i can run an
>>>>>>> example directly if you can advise the best way to do this
>>>>>> As long as the problem occurs with this message.
>>>>>>
>>>>>> BTW, it would also be helpful to have the Dovecot logs from this
>>>>>> delivery, with mail_debug configured to "yes".
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Stephan.
>>>>>>
>>>>>>> On 19/10/2016 12:54, Stephan Bosch wrote:
>>>>>>>> Also, please provide an example scenario; i.e., for one
>>>>>>>> problematic delivery provide:
>>>>>>>>
>>>>>>>> - The values of the variables substituted in the dovecot-lda
>>>>>>>> command line; i.e., provide that command line.
>>>>>>>> - The incoming e-mail message.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> Stephan.
>>>>>>>>
>>>>>>>> Op 19-10-2016 om 12:43 schreef Matthew Broadhead:
>>>>>>>>> dovecot is configured by sentora control panel to a certain
>>>>>>>>> extent. if you want those configs i can send them as well
>>>>>>>>>
>>>>>>>>> dovecot -n
>>>>>>>>>
>>>>>>>>> debug_log_path = /var/log/dovecot-debug.log
>>>>>>>>> dict {
>>>>>>>>> quotadict =
>>>>>>>>> mysql:/etc/sentora/configs/dovecot2/dovecot-dict-quota.conf
>>>>>>>>> }
>>>>>>>>> disable_plaintext_auth = no
>>>>>>>>> first_valid_gid = 12
>>>>>>>>> first_valid_uid = 996
>>>>>>>>> info_log_path = /var/log/dovecot-info.log
>>>>>>>>> lda_mailbox_autocreate = yes
>>>>>>>>> lda_mailbox_autosubscribe = yes
>>>>>>>>> listen = *
>>>>>>>>> lmtp_save_to_detail_mailbox = yes
>>>>>>>>> log_path = /var/log/dovecot.log
>>>>>>>>> log_timestamp = %Y-%m-%d %H:%M:%S
>>>>>>>>> mail_fsync = never
>>>>>>>>> mail_location = maildir:/var/sentora/vmail/%d/%n
>>>>>>>>> managesieve_notify_capability = mailto
>>>>>>>>> managesieve_sieve_capability = fileinto reject envelope
>>>>>>>>> encoded-character vacation subaddress comparator-i;ascii-numeric
>>>>>>>>> relational regex imap4flags copy include variables body enotify
>>>>>>>>> environment mailbox date ihave
>>>>>>>>> passdb {
>>>>>>>>> args = /etc/sentora/configs/dovecot2/dovecot-mysql.conf
>>>>>>>>> driver = sql
>>>>>>>>> }
>>>>>>>>> plugin {
>>>>>>>>> acl = vfile:/etc/dovecot/acls
>>>>>>>>> quota = maildir:User quota
>>>>>>>>> sieve = ~/dovecot.sieve
>>>>>>>>> sieve_dir = ~/sieve
>>>>>>>>> sieve_global_dir = /var/sentora/sieve/
>>>>>>>>> sieve_global_path = /var/sentora/sieve/globalfilter.sieve
>>>>>>>>> sieve_max_script_size = 1M
>>>>>>>>> sieve_vacation_send_from_recipient = yes
>>>>>>>>> trash = /etc/sentora/configs/dovecot2/dovecot-trash.conf
>>>>>>>>> }
>>>>>>>>> protocols = imap pop3 lmtp sieve
>>>>>>>>> service auth {
>>>>>>>>> unix_listener /var/spool/postfix/private/auth {
>>>>>>>>> group = postfix
>>>>>>>>> mode = 0666
>>>>>>>>> user = postfix
>>>>>>>>> }
>>>>>>>>> unix_listener auth-userdb {
>>>>>>>>> group = mail
>>>>>>>>> mode = 0666
>>>>>>>>> user = vmail
>>>>>>>>> }
>>>>>>>>> }
>>>>>>>>> service dict {
>>>>>>>>> unix_listener dict {
>>>>>>>>> group = mail
>>>>>>>>> mode = 0666
>>>>>>>>> user = vmail
>>>>>>>>> }
>>>>>>>>> }
>>>>>>>>> service imap-login {
>>>>>>>>> inet_listener imap {
>>>>>>>>> port = 143
>>>>>>>>> }
>>>>>>>>> process_limit = 500
>>>>>>>>> process_min_avail = 2
>>>>>>>>> }
>>>>>>>>> service imap {
>>>>>>>>> vsz_limit = 256 M
>>>>>>>>> }
>>>>>>>>> service managesieve-login {
>>>>>>>>> inet_listener sieve {
>>>>>>>>> port = 4190
>>>>>>>>> }
>>>>>>>>> process_min_avail = 0
>>>>>>>>> service_count = 1
>>>>>>>>> vsz_limit = 64 M
>>>>>>>>> }
>>>>>>>>> service pop3-login {
>>>>>>>>> inet_listener pop3 {
>>>>>>>>> port = 110
>>>>>>>>> }
>>>>>>>>> }
>>>>>>>>> ssl_cert = </etc/sentora/certs/2_mail.nbmlaw.co.uk.crt
>>>>>>>>> ssl_key = </etc/sentora/certs/mail.nbmlaw.co.uk.key
>>>>>>>>> ssl_protocols = !SSLv2 !SSLv3
>>>>>>>>> userdb {
>>>>>>>>> driver = prefetch
>>>>>>>>> }
>>>>>>>>> userdb {
>>>>>>>>> args = /etc/sentora/configs/dovecot2/dovecot-mysql.conf
>>>>>>>>> driver = sql
>>>>>>>>> }
>>>>>>>>> protocol lda {
>>>>>>>>> mail_fsync = optimized
>>>>>>>>> mail_plugins = quota sieve
>>>>>>>>> postmaster_address = postmaster at ns1.nbmlaw.co.uk
>>>>>>>>> }
>>>>>>>>> protocol imap {
>>>>>>>>> imap_client_workarounds = delay-newmail
>>>>>>>>> mail_fsync = optimized
>>>>>>>>> mail_max_userip_connections = 60
>>>>>>>>> mail_plugins = quota imap_quota trash
>>>>>>>>> }
>>>>>>>>> protocol lmtp {
>>>>>>>>> mail_plugins = quota sieve
>>>>>>>>> }
>>>>>>>>> protocol pop3 {
>>>>>>>>> mail_plugins = quota
>>>>>>>>> pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
>>>>>>>>> pop3_uidl_format = %08Xu%08Xv
>>>>>>>>> }
>>>>>>>>> protocol sieve {
>>>>>>>>> managesieve_implementation_string = Dovecot Pigeonhole
>>>>>>>>> managesieve_max_compile_errors = 5
>>>>>>>>> managesieve_max_line_length = 65536
>>>>>>>>> }
>>>>>>>>>
>>>>>>>>> managesieve.sieve
>>>>>>>>>
>>>>>>>>> require ["fileinto","vacation"];
>>>>>>>>> # rule:[vacation]
>>>>>>>>> if true
>>>>>>>>> {
>>>>>>>>> vacation :days 1 :subject "Vacation subject" text:
>>>>>>>>> i am currently out of the office
>>>>>>>>>
>>>>>>>>> trying some line breaks
>>>>>>>>>
>>>>>>>>> ...zzz
>>>>>>>>> .
>>>>>>>>> ;
>>>>>>>>> }
>>>>>>>>>
>>>>>>>>> On 19/10/2016 12:29, Stephan Bosch wrote:
>>>>>>>>>> Could you send your configuration (output from `dovecot -n`)?
>>>>>>>>>>
>>>>>>>>>> Also, please provide an example scenario; i.e., for one
>>>>>>>>>> problematic delivery provide:
>>>>>>>>>>
>>>>>>>>>> - The values of the variables substituted below.
>>>>>>>>>>
>>>>>>>>>> - The incoming e-mail message.
>>>>>>>>>>
>>>>>>>>>> - The Sieve script (or at least that vacation command).
>>>>>>>>>>
>>>>>>>>>> Regards,
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Stephan.
>>>>>>>>>>
>>>>>>>>>> Op 19-10-2016 om 11:42 schreef Matthew Broadhead:
>>>>>>>>>>> hi, does anyone have any ideas about this issue? i have not
>>>>>>>>>>> had any response yet
>>>>>>>>>>>
>>>>>>>>>>> i tried changing /etc/postfix/master.cf line:
>>>>>>>>>>> dovecot unix - n n - - pipe
>>>>>>>>>>> flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -d
>>>>>>>>>>> ${recipient}
>>>>>>>>>>>
>>>>>>>>>>> to
>>>>>>>>>>> flags=DRhu user=vmail:mail
>>>>>>>>>>> argv=/usr/libexec/dovecot/dovecot-lda -f ${sender} -d
>>>>>>>>>>> ${user}@${nexthop} -a ${original_recipient}
>>>>>>>>>>>
>>>>>>>>>>> and
>>>>>>>>>>> -d ${user}@${domain} -a {recipient} -f ${sender} -m
>>>>>>>>>>> ${extension}
>>>>>>>>>>>
>>>>>>>>>>> but it didn't work
>>>>>>>>>>>
>>>>>>>>>>> On 12/10/2016 13:57, Matthew Broadhead wrote:
>>>>>>>>>>>> I have a server running
>>>>>>>>>>>> centos-release-7-2.1511.el7.centos.2.10.x86_64 with dovecot
>>>>>>>>>>>> version 2.2.10. I am also using roundcube for webmail. when a
>>>>>>>>>>>> vacation filter (reply with message) is created in roundcube
>>>>>>>>>>>> it adds a rule to managesieve.sieve in the user's mailbox.
>>>>>>>>>>>> everything works fine except the reply comes from
>>>>>>>>>>>> vmail at ns1.domain.tld instead of user at domain.tld.
>>>>>>>>>>>> ns1.domain.tld is the fully qualified name of the server.
>>>>>>>>>>>>
>>>>>>>>>>>> it used to work fine on my old CentOS 6 server so I am not
>>>>>>>>>>>> sure what has changed. Can anyone point me in the direction
>>>>>>>>>>>> of where I can configure this behaviour?
More information about the dovecot
mailing list