Quota emails... nothing happened
Stephane Magnier
steph.mag220 at netcourrier.com
Thu Oct 7 14:28:23 EEST 2021
Hi,
sorry to bother you.. any idea ? how to give more space to a specific user ?
And where to place the line, in order to overide the general rule ?
I suspect that to increase the space for the specific user AZT000, that
should be : quota_rule=azt000:storage=160gb.. but where
Thanks and regards,
Le 06/10/2021 à 15:49, Stephane Magnier a écrit :
> not exactly..
>
> Usernames are : azt000, azt001, azt002, etc.....
> All of them have their mailbox in /var/spool2/mail/azt000,
> /var/spool2/mail/azt001 )
>
> Everybody will get 30Gb by default
> Except the user *azt000*, who will have 160Gb
>
> So, I understand, that the general rule is this
>
>
> plugin {
> quota = maildir:User quota
> quota_rule = *:storage=30GB
> quota_rule2 = Trash:storage=+100MB
> quota_rule3 = Spam:storage=+20%%
> }
>
>
> Now, I suppose , to specify the user *azt000 and only this one*, to
> get a quota of 160Gb, I should write something like:
> *quota_rule=azt000:storage=+160Gb *correct ?*
> *
> but where !
>
> 1) If I had this sentence into_the plugin_ ( as it was before ) , it's
> not considered. Every body stays with the general 30Gb allocated in my
> example
> 2) My understanding is, according to the link you sent to me, I have
> to write this specific condition :***quota_rule=azt000:storage=+160Gb*
> _Outside_ the plugin.. I've made different tests and all of them are
> not working.. The Dovecot doesn't start
>
> I also tried this
>
> userdb {
> driver = passwd
> args = /etc/dovecot/quota-overrides
> quota_rule=azt000:storage=+160Gb
> result_success=continue-ok
> }
>
> I would like to keep 30gb for any user AZTxxx, But for some specific
> users ( like AZT000), I wish to adapt the quota limit
>
> sorry to bother with that. I hope not to be too much pain in the neck..:-)
> Thanks !!
> *
> *
> Le 06/10/2021 à 14:51, Aki Tuomi a écrit :
>> No. The syntax is not correct.
>>
>> https://doc.dovecot.org/configuration_manual/quota/#quota-rules
>>
>> this says that the rule is:
>>
>> quota_rule = <mailbox name>:<limit configuration>
>>
>> so unless you want 160GB quota for mailbox folder `azt000` (not username), you want to use * here.
>>
>> Aki
>>
>>> On 06/10/2021 15:36 Stephane Magnier<steph.mag220 at netcourrier.com> wrote:
>>>
>>>
>>> OK, but is the syntax correct ?
>>>
>>> Should it be :azt000:quota_rule4=+160GB ?
>>> Is that correct ?
>>>
>>> Because I've made the test.. It didn't "shoot at me" while restarting the service, it apparently accept the syntax, but the result is still wrong..
>>> It is still considering a limit of 30gb and not 160Gb
>>> ( the line : quota_rule = *:storage=30GB )
>>>
>>> To sum up , I have
>>>
>>>
>>>> plugin {
>>>> quota = maildir:User quota
>>>> quota_rule = *:storage=30GB
>>>> quota_rule2 = Trash:storage=+100MB
>>>> quota_rule3 = Spam:storage=+20%%
>>>> azt000:quota_rule4=+160GB
>>>>
>>>>
>>>> quota_status_success = DUNNO
>>>> quota_status_nouser = DUNNO
>>>> quota_status_overquota = "552 5.2.2 Mailbox is full"
>>>> quota_warning = storage=95%% quota-warning 95 %u
>>>> quota_warning2 = storage=80%% quota-warning 80 %u
>>>> quota_warning3 = storage=100%% quota-warning below %u
>>>> quota_grace = 10%%
>>>>
>>>> # Quota plugin can also limit the maximum accepted mail size.
>>>> quota_max_mail_size = 100M
>>>> }
>>>>
>>> and
>>>
>>>
>>>> userdb {
>>>> driver = passwd
>>>> args = /etc/dovecot/quota-overrides
>>>> result_success=continue-ok
>>>> }
>>>>
>>> but
>>>
>>>
>>>> [root at mbox1 conf.d]# service dovecot restart
>>>> Redirecting to /bin/systemctl restart dovecot.service
>>>> [root at mbox1 conf.d]# doveadm quota get -u azt000
>>>> Quota name Type Value Limit %
>>>> User quota STORAGE 22268406 31457280 70
>>>> User quota MESSAGE 29853 - 0
>>>> [root at mbox1 conf.d]#
>>>>
>>>
>>> With 70% ; it's considering the 30Gb and not the 160Gb ( the AZT000 folder size is about 21Gb )
>>>
>>>
>>>
>>> Le 06/10/2021 à 14:08, Aki Tuomi a écrit :
>>>
>>>> The rules must be consecutive,
>>>>
>>>> if your global config has
>>>>
>>>> quota_rule1
>>>> quota_rule2
>>>>
>>>> then the userdb must return
>>>>
>>>> quota_rule3. Or it will overwrite an existing rule.
>>>>
>>>> Aki
>>>>
>>>>
>>>>
>>>>> On 06/10/2021 13:07 Stephane Magnier<steph.mag220 at netcourrier.com> wrote:
>>>>>
>>>>>
>>>>> Hi,
>>>>>
>>>>> OK, I wrote this :
>>>>>
>>>>>
>>>>>
>>>>>> userdb {
>>>>>> driver = passwd
>>>>>> args = /etc/dovecot/quota-overrides
>>>>>>
>>>>>> result_success=continue-ok
>>>>>>
>>>>>> # Override fields from passwd
>>>>>> #override_fields = home=/home/virtual/%u
>>>>>> }
>>>>>>
>>>>>>
>>>>> but sorry I don't understand the following line
>>>>>
>>>>> username::::::::::quota_ruleX=... where X is the next rule number.
>>>>>
>>>>> What should I write ?...... for instance : ? something like that ??
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Le 06/10/2021 à 10:13, Aki Tuomi a écrit :
>>>>>
>>>>>
>>>>>> That `*` there is actually mailbox mask. You have to return an additional quota_ruleN from your userdb for that user.
>>>>>>
>>>>>> You can do e.g.
>>>>>>
>>>>>> userdb {
>>>>>> ..
>>>>>> result_success=continue-ok}
>>>>>> }
>>>>>>
>>>>>> userdb {
>>>>>> driver = passwd
>>>>>> args = /etc/dovecot/quota-overrides
>>>>>> }
>>>>>>
>>>>>> and put in there
>>>>>>
>>>>>> username::::::::::quota_ruleX=... where X is the next rule number.
>>>>>>
>>>>>> the count of : might be wrong.
>>>>>>
>>>>>> Aki
>>>>>>
>>>>>>
>>>>>>
>>>>>>> On 06/10/2021 10:43 Stephane Magnier<steph.mag220 at netcourrier.com> wrote:
>>>>>>>
>>>>>>>
>>>>>>> Hi Again,
>>>>>>>
>>>>>>> Juste another one...
>>>>>>>
>>>>>>> The quota I've decided is 30Gb for everybody
>>>>>>> I would like to add an exception for the user AZT000 so here is my test :
>>>>>>>
>>>>>>> I put 60 GB for AZT000, but apparently, this is not seen :-( No error message
>>>>>>> Is there a general syntax for a specific user ?
>>>>>>>
>>>>>>> NB: I tried :
>>>>>>> quota_rule = azt000:storage=+60GB orquota_rule1 = azt000:storage=+60GB same results
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> plugin {
>>>>>>>> quota = maildir:User quota
>>>>>>>> quota_rule = *:storage=30GB
>>>>>>>> quota_rule2 = Trash:storage=+100MB
>>>>>>>> quota_rule3 = Spam:storage=+20%%
>>>>>>>> # quota_rule = *:storage=70GB
>>>>>>>> # quota_rule = *:storage=70GB
>>>>>>>> quota_rule = azt000:storage=+60GB
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> Le 06/10/2021 à 08:09, Stephane Magnier a écrit :
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Great !! works fine..
>>>>>>>>
>>>>>>>> I had in fact, twice the same déclaration of quotat and storage on the same file..... one of them was with an upper case "S" for Storage..
>>>>>>>>
>>>>>>>> Thanks again
>>>>>>>>
>>>>>>>>
>>>>>>>> Le 06/10/2021 à 07:50, Aki Tuomi a écrit :
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>> On 06/10/2021 08:38 Stephane Magnier<steph.mag220 at netcourrier.com> wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Le 06/10/2021 à 06:51, Aki Tuomi a écrit :
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>> On 06/10/2021 07:30 Stephane Magnier<steph.mag220 at netcourrier.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Le 06/10/2021 à 06:10, Stephane Magnier a écrit :
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>> I am just running Dovecot v 2.3.8 .. seems to work fine.
>>>>>>>>>>>>> I just add the quota plugin.. and.. I cannot see any differences.. I cannot see any information on Quota per user.. No specific info on Log file :-(
>>>>>>>>>>>>>
>>>>>>>>>>>>> Any help please ?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Tahnks for your help
>>>>>>>>>>>>>
>>>>>>>>>>>>> Here is my config :
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> # 2.3.8 (9df20d2db): /etc/dovecot/dovecot.conf
>>>>>>>>>>>>> # Pigeonhole version 0.5.8 (b7b03ba2)
>>>>>>>>>>>>> # OS: Linux 4.18.0-305.12.1.el8_4.x86_64 x86_64 CentOS Linux release 8.4.2105 nfs4
>>>>>>>>>>>>> # Hostname: mbox1.intranet.office.itx
>>>>>>>>>>>>> auth_cache_negative_ttl = 5 mins
>>>>>>>>>>>>> auth_cache_ttl = 5 mins
>>>>>>>>>>>>> auth_mechanisms = plain login
>>>>>>>>>>>>> auth_username_format = %u
>>>>>>>>>>>>> debug_log_path = /var/log/dovecot-debug.log
>>>>>>>>>>>>> default_vsz_limit = 4 G
>>>>>>>>>>>>> info_log_path = /var/log/dovecot-info.log
>>>>>>>>>>>>> listen = * [::]
>>>>>>>>>>>>> log_path = /var/log/dovecot.log
>>>>>>>>>>>>> login_trusted_networks = 172.18.0.0/16 127.0.0.1 ::1
>>>>>>>>>>>>> mail_access_groups = dovecot
>>>>>>>>>>>>> mail_fsync = always
>>>>>>>>>>>>> mail_location = maildir:/var/spool2/mail/%u:LAYOUT=fs
>>>>>>>>>>>>> mail_nfs_storage = yes
>>>>>>>>>>>>> mail_plugins = " quota"
>>>>>>>>>>>>> mail_privileged_group = mail
>>>>>>>>>>>>> managesieve_notify_capability = mailto
>>>>>>>>>>>>> managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave
>>>>>>>>>>>>> mbox_very_dirty_syncs = yes
>>>>>>>>>>>>> mbox_write_locks = fcntl
>>>>>>>>>>>>> mmap_disable = yes
>>>>>>>>>>>>> namespace inbox {
>>>>>>>>>>>>> disabled = no
>>>>>>>>>>>>> ignore_on_failure = no
>>>>>>>>>>>>> inbox = yes
>>>>>>>>>>>>> list = yes
>>>>>>>>>>>>> location =
>>>>>>>>>>>>> mailbox Archive {
>>>>>>>>>>>>> auto = no
>>>>>>>>>>>>> comment = " All my Accepted/NON SPAM"
>>>>>>>>>>>>> special_use = \Archive
>>>>>>>>>>>>> }
>>>>>>>>>>>>> mailbox Drafts {
>>>>>>>>>>>>> auto = subscribe
>>>>>>>>>>>>> special_use = \Drafts
>>>>>>>>>>>>> }
>>>>>>>>>>>>> mailbox Junk {
>>>>>>>>>>>>> auto = subscribe
>>>>>>>>>>>>> autoexpunge = 90 days
>>>>>>>>>>>>> special_use = \Junk
>>>>>>>>>>>>> }
>>>>>>>>>>>>> mailbox Sent {
>>>>>>>>>>>>> auto = subscribe
>>>>>>>>>>>>> special_use = \Sent
>>>>>>>>>>>>> }
>>>>>>>>>>>>> mailbox Trash {
>>>>>>>>>>>>> auto = no
>>>>>>>>>>>>> autoexpunge = 60 days
>>>>>>>>>>>>> special_use = \Trash
>>>>>>>>>>>>> }
>>>>>>>>>>>>> mailbox virtual/All {
>>>>>>>>>>>>> auto = no
>>>>>>>>>>>>> special_use = \All
>>>>>>>>>>>>> }
>>>>>>>>>>>>> prefix =
>>>>>>>>>>>>> subscriptions = yes
>>>>>>>>>>>>> type = private
>>>>>>>>>>>>> }
>>>>>>>>>>>>> passdb {
>>>>>>>>>>>>> driver = pam
>>>>>>>>>>>>> }
>>>>>>>>>>>>> plugin {
>>>>>>>>>>>>> quota_grace = 10%%
>>>>>>>>>>>>> quota_max_mail_size = 100M
>>>>>>>>>>>>> quota_rule = *:storage=10000M
>>>>>>>>>>>>> quota_rule2 = Trash:Storage=+100M
>>>>>>>>>>>>> quota_rule3 = Spam:storage=+20%%
>>>>>>>>>>>>> quota_status_nouser = DUNNO
>>>>>>>>>>>>> quota_status_overquota = 552 5.2.2 Mailbox is full
>>>>>>>>>>>>> quota_status_success = DUNNO
>>>>>>>>>>>>> quota_warning = storage=95%% quota-warning 95 %u
>>>>>>>>>>>>> quota_warning2 = storage=80%% quota-warning 80 %u
>>>>>>>>>>>>> quota_warning3 = -storage=100%% quota-warning below %u
>>>>>>>>>>>>> sieve =file:~/sieve;active=~/.dovecot.sieve
>>>>>>>>>>>>> }
>>>>>>>>>>>>> pop3_uidl_format = %v-%u
>>>>>>>>>>>>> service auth {
>>>>>>>>>>>>> unix_listener auth-master {
>>>>>>>>>>>>> mode = 0666
>>>>>>>>>>>>> }
>>>>>>>>>>>>> unix_listener auth-userdb {
>>>>>>>>>>>>> mode = 0600
>>>>>>>>>>>>> user = mail
>>>>>>>>>>>>> }
>>>>>>>>>>>>> }
>>>>>>>>>>>>> service dict {
>>>>>>>>>>>>> unix_listener dict {
>>>>>>>>>>>>> mode = 0600
>>>>>>>>>>>>> user = mail
>>>>>>>>>>>>> }
>>>>>>>>>>>>> }
>>>>>>>>>>>>> service imap-login {
>>>>>>>>>>>>> inet_listener imap {
>>>>>>>>>>>>> port = 143
>>>>>>>>>>>>> }
>>>>>>>>>>>>> inet_listener imaps {
>>>>>>>>>>>>> port = 993
>>>>>>>>>>>>> ssl = yes
>>>>>>>>>>>>> }
>>>>>>>>>>>>> process_min_avail = 4
>>>>>>>>>>>>> service_count = 0
>>>>>>>>>>>>> }
>>>>>>>>>>>>> service lmtp {
>>>>>>>>>>>>> inet_listener lmtp {
>>>>>>>>>>>>> port = 24
>>>>>>>>>>>>> }
>>>>>>>>>>>>> unix_listener /var/run/lmtp {
>>>>>>>>>>>>> group = mail
>>>>>>>>>>>>> mode = 0660
>>>>>>>>>>>>> user = mail
>>>>>>>>>>>>> }
>>>>>>>>>>>>> }
>>>>>>>>>>>>> service pop3-login {
>>>>>>>>>>>>> inet_listener pop3 {
>>>>>>>>>>>>> address = *
>>>>>>>>>>>>> port = 110
>>>>>>>>>>>>> }
>>>>>>>>>>>>> inet_listener pop3s {
>>>>>>>>>>>>> port = 995
>>>>>>>>>>>>> ssl = yes
>>>>>>>>>>>>> }
>>>>>>>>>>>>> }
>>>>>>>>>>>>> service quota-warning {
>>>>>>>>>>>>> executable = script /usr/local/bin/quota-warning.sh
>>>>>>>>>>>>> unix_listener quota-warning {
>>>>>>>>>>>>> user = mail
>>>>>>>>>>>>> }
>>>>>>>>>>>>> user = dovecot
>>>>>>>>>>>>> }
>>>>>>>>>>>>> service submission {
>>>>>>>>>>>>> process_limit = 250
>>>>>>>>>>>>> }
>>>>>>>>>>>>> ssl = required
>>>>>>>>>>>>> ssl_ca = </etc/mail/ssl/ssl1/xxxxxp_net.ca-bundle
>>>>>>>>>>>>> ssl_cert = </etc/mail/ssl/ssl1/xxxxxx_net.crt
>>>>>>>>>>>>> ssl_cipher_list = HIGH:!aNULL:!ADH:!DH:!RC4:!MD5:!RSA
>>>>>>>>>>>>> ssl_dh = # hidden, use -P to show it
>>>>>>>>>>>>> ssl_key = # hidden, use -P to show it
>>>>>>>>>>>>> userdb {
>>>>>>>>>>>>> driver = passwd
>>>>>>>>>>>>> }
>>>>>>>>>>>>> verbose_proctitle = yes
>>>>>>>>>>>>> protocol lmtp {
>>>>>>>>>>>>> mail_fsync = optimized
>>>>>>>>>>>>> mail_plugins = autocreate quota acl fts fts_solr zlib mail_log notify sieve
>>>>>>>>>>>>> postmaster_address =it at intranet.office.itx
>>>>>>>>>>>>> }
>>>>>>>>>>>>> protocol lda {
>>>>>>>>>>>>> mail_fsync = optimized
>>>>>>>>>>>>> mail_plugins = " quota sieve quota"
>>>>>>>>>>>>> }
>>>>>>>>>>>>> protocol imap {
>>>>>>>>>>>>> mail_max_userip_connections = 80
>>>>>>>>>>>>> mail_plugins = " quota quota imap_quota"
>>>>>>>>>>>>> ssl_cert = </etc/mail/ssl/ssl1/STAR_aztgrp_net.crt
>>>>>>>>>>>>> ssl_key = # hidden, use -P to show it
>>>>>>>>>>>>> }
>>>>>>>>>>>>> protocol pop3 {
>>>>>>>>>>>>> mail_max_userip_connections = 10
>>>>>>>>>>>>> mail_plugins = " quota"
>>>>>>>>>>>>> }
>>>>>>>>>>>>> protocol submission {
>>>>>>>>>>>>> mail_max_userip_connections = 10
>>>>>>>>>>>>> mail_plugins = " quota"
>>>>>>>>>>>>> }
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>> Just for info
>>>>>>>>>>>>
>>>>>>>>>>>> [root at mbox1 xenia]# doveadm quota get -A |grep "STORAGE"
>>>>>>>>>>>> Nothing at all ?? weird
>>>>>>>>>>>> [root at mbox1 xenia]#
>>>>>>>>>>>>
>>>>>>>>>>>> [root at mbox1 xenia]# doveadm quota get -u <user1>
>>>>>>>>>>>> Quota name Type Value Limit %
>>>>>>>>>>>> [root at mbox1 xenia]#
>>>>>>>>>>>> => Absolutely nothing is displayed ????
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> normally, the size of the user1 email folder is about 21 Gb
>>>>>>>>>>>> So..just modified the line :quota_rule = *:storage=100G
>>>>>>>>>>>> But nothing has changed...
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> You are missing quota driver settings, the recommended settings are
>>>>>>>>>>>
>>>>>>>>>>> plugin {
>>>>>>>>>>> quota = count
>>>>>>>>>>> quota_vsizes = yes
>>>>>>>>>>> }
>>>>>>>>>>>
>>>>>>>>>>> Aki
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>> Hi Aki,
>>>>>>>>>> Thanks for your reply..
>>>>>>>>>>
>>>>>>>>>> I just tryed to ad it.. but this can't connect anymore .
>>>>>>>>>> Here is my exact declaration "90-quota.conf"
>>>>>>>>>>
>>>>>>>>>> ( based on :https://doc.dovecot.org/configuration_manual/quota/ )
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> plugin {
>>>>>>>>>>> quota = count
>>>>>>>>>>> quota_vsizes = yes
>>>>>>>>>>> #quota = maildir:User quota
>>>>>>>>>>> quota_rule = *:storage=100GB
>>>>>>>>>>> # quota_rule2 = Trash:storage=+100MB
>>>>>>>>>>> # quota_rule3 = Spam:storage=+20%%
>>>>>>>>>>> # 20% of 100GB = 20GB
>>>>>>>>>>> quota_status_success = DUNNO
>>>>>>>>>>> quota_status_nouser = DUNNO
>>>>>>>>>>> quota_status_overquota = "552 5.2.2 Mailbox is full"
>>>>>>>>>>> quota_warning = storage=95%% quota-warning 95 %u
>>>>>>>>>>> quota_warning2 = storage=80%% quota-warning 80 %u
>>>>>>>>>>> quota_warning3 = -storage=100%% quota-warning below %u
>>>>>>>>>>>
>>>>>>>>>>> # LDA/LMTP allows saving the last mail to bring user from under quota to
>>>>>>>>>>> # over quota, if the quota doesn't grow too high. Default is to allow as
>>>>>>>>>>> # long as quota will stay under 10% above the limit. Also allowed e.g. 10M.
>>>>>>>>>>> quota_grace = 10%%
>>>>>>>>>>>
>>>>>>>>>>> # Quota plugin can also limit the maximum accepted mail size.
>>>>>>>>>>> quota_max_mail_size = 100M
>>>>>>>>>>> }
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> The error message I have now is :
>>>>>>>>>>
>>>>>>>>>> Oct 06 07:23:35 imap(azt000)<7381><3pAIWajNgdcgAUHQ/kJ8Aikr1PIAQmFL>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage
>>>>>>>>>> Oct 06 07:23:35 imap(azt000)<7382><jqwJWajNgtcgAUHQ/kJ8Aikr1PIAQmFL>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage
>>>>>>>>>> Oct 06 07:26:02 master: Warning: Killed with signal 15 (by pid=8420 uid=0 code=kill)
>>>>>>>>>> Oct 06 07:26:10 imap(azt000)<8468><cDRLYqjNcsSsEgA3>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage
>>>>>>>>>> Oct 06 07:26:13 imap(azt000)<8469><mxN6YqjNdMSsEgA3>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage
>>>>>>>>>>
>>>>>>>>>> Then you can see that I've removed the 2 lines
>>>>>>>>>> # quota_rule2 = Trash:storage=+100MB
>>>>>>>>>> # quota_rule3 = Spam:storage=+20%%
>>>>>>>>>>
>>>>>>>>>> but without any success
>>>>>>>>>>
>>>>>>>>>> Effectively.. what is the Word "Storage" for Dovecot ?? no idea ... I just wrote what I saw :-)
>>>>>>>>>>
>>>>>>>>>> For info : all the mailbox are placed on a NFS storage.. Don't know if this help to locate the problem..
>>>>>>>>>> Thanks and regards,
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>> Did you try changing Storage => storage in your rule? It seems to be coming either from userdb or your config.
>>>>>>>>>
>>>>>>>>> Try `doveadm user azt000` to if your userdb is providing these rules.
>>>>>>>>>
>>>>>>>>> Aki
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://dovecot.org/pipermail/dovecot/attachments/20211007/b56b239b/attachment-0001.html>
More information about the dovecot
mailing list