- dovecot - dovecot.org

[Dovecot] Dovecot 2.0.13 problem with LMTP
by Innocenzi, Cinzia 05 Jul '11

05 Jul '11

Hello, we have dovecot 2.0.13 installed in our RHEL5 servers. We use dovecot as a lmtp proxy on the front end mail relays and dovecot for back end lmtp/pop/imap. All our servers have RHEL5.6 64-bit and dovecot 2.0.13 installed, and the back end has also an ext3 mbox file-system mounted. Sometimes we have mails that get stuck on our postfix queue with the following error: Remote server not answering (timeout in DATA input) (in reply to end of DATA command) In our logs we only see the fact that the connection times out after 1 minute and gets disconnected: Jun 22 11:56:53 back-end dovecot: lmtp(3256): Connect from a.b.c.d Jun 22 11:57:53 back-end dovecot: lmtp(3256): Disconnect from a.b.c.d: Connection closed Jun 22 11:56:53 front-end dovecot: lmtp(16397): Connect from a.b.c.d Jun 22 11:57:53 front-end dovecot: lmtp(16397): Disconnect from a.b.c.d: Disconnected for inactivity We've tried to recalculate the mbox quota using "doveadm quota recalc -n ..." command and flushed our mail queue, but the mail still gets stuck on the postfix queue with the same error. It doesn't happen for every single mail, it's random. I'm attaching the output of dovecot -n for both servers. Can you please help us? Regards CINZIA INNOCENZI Technical Consulting HP Enterprise Services Telephone +39 06.6542.5758 Email cinzia.innocenzi(a)hp.com<mailto:cinzia.innocenzi@hp.com> Via Achille Campanile, 85 / Rome, Italy 00143 [cid:image001.jpg@01CC30D7.612C3210]

3 12

[Dovecot] imap idle and concurrent connections
by Wolfgang Rosenauer 05 Jul '11

05 Jul '11

Hi, in my testing dovecot (1.2 in that case) seems to not notify all idling clients about new "recent" mails but only one of them. The others get usually a message about the new number of mails after some time but never recent ones. Only one client gets notified about a new mail. Is that a known issue or something which might be configuration specific? Wolfgang

3 4

Re: [Dovecot] Exim and Dovecot2 SASL: 435 Unable to authenticate at present
by Sergey Urushkin 04 Jul '11

04 Jul '11

On Mon, 4 Jul 2011 12:38:01 +0200, Andraž 'ruskie' Levstik wrote: > :2011-06-28T21:38:Sergey Urushkin: > >> Hi. I had working Exim 4.71 and Dovecot 1.2.9 SASL configuration on >> Ubuntu >> Lucid, but needed some features from dovecot2, so I installed 2.0.13 >> from >> https://launchpad.net/~carsten-uppenbrink-net/+archive/dovecot2 . >> Now I get >> Subj error while trying to authenticate via dovecot auth-client >> socket. >> However IMAP auth works fine with 2.0.13 and smtp auth worked fine >> until >> upgrade, so I think there is something wrong with dovecot2. >> >> Dovecot logs stay empty even with auth_debug*, just one string >> "auth: Debug: >> Loading modules from bla...". But here is another information that >> may help. >> And if it's needed I can build dovecot myself to ensure that >> ppa-build isn't >> guilty. Or debug some another way. > > If this is still relevant. > > This has been fixed in a later than 4.71 exim - specifically > 4.72(current version is 4.76) so just upgrade and it will work. Thanks, it's working after upgrading. As you adviced, I wanted to check if the latest version works before posting exim bug report. Well, no bug - no report is needed. > > Regards -- Best regards, Sergey Urushkin

1 0

Re: [Dovecot] virtual users
by /dev/rob0 04 Jul '11

04 Jul '11

On Mon, Jul 04, 2011 at 02:58:34PM +0300, Amira Othman wrote: > Iam using dovecot-1.0.7-7.el5 and postfix-2.3.3-2.3.el5_6 on centos > 5.6 I want to configure mail server without system account .I can > send using the virtual account but can't receive and I have this in > log file > > relay=local, delay=0.02, delays=0.02/0/0/0, dsn=5.1.1, > status=bounced (unknown user: "hoda") This is a Postfix problem, not a Dovecot one. It says that the recipient domain is in this list: > mydestination = $myhostname, localhost.$mydomain, localhost, > $mydomain ... but the "hoda" user or alias does not exist in /etc/passwd nor /etc/aliases. See: http://www.postfix.org/VIRTUAL_README.html http://www.postfix.org/ADDRESS_CLASS_README.html The "upgrade" advice is very good. You should not be starting out with something so long past the end of its support. Follow up on Postfix issues on the Postfix list. However, your issue will probably be solved with some time in the documentation. -- Offlist mail to this address is discarded unless "/dev/rob0" or "not-spam" is in Subject: header

1 1

Re: [Dovecot] virtual users
by Charles Marcus 04 Jul '11

04 Jul '11

On 2011-07-04 7:58 AM, Amira Othman wrote: > Iam using dovecot-1.0.7-7.el5 and postfix-2.3.3-2.3.el5_6 Need I say it? Upgrade. Both are now unsupported/EOL for a long time now... -- Best regards, Charles

1 0

Re: [Dovecot] Replication problem I have. And how I think I can get around problem.
by Peter Dolding 04 Jul '11

04 Jul '11

> Mon, 04 Jul 2011 10:46:31 Ed W > On 03/07/2011 07:20, Peter Dolding wrote: > > Now what I need to be able to deal with the problem. > > Have you considered a new Dovecot storage backend? I have plotted some > designs on a napkin a few times.. Consider some kind of storage server > with "eventually consistent" replication capabilities. This could be > used for the metadata storage for all the emails (ie FROM, TO, DATE, > SUBJECT and all the other non body parts you might search on) > Remember I am new to the Dovecot source code. How to code a Dovecot Storage backend it where I might have to start. Really I don't care if the servers are ever fully consistent other than the fact they both contain the same emails. Of course read status shared would be nice. If that status information is out so be it. "eventually consistent" is a deadly thing to try to aim for. Its a simple fact of what needs to be backed up. If a user is at one physical location all the time and connecting to the same server all the time they will not ever see that the 2 servers are not 100 percent synced. For my usage cases lot of times 100 percent synced will be more wasted effort. Roughly synced will be more than suitable. Of course what I am talking about can be used as an foundation to get data from point a to point b. > > Your replication engine can now work in conjunction with Dovecot to sync > changes between servers as quickly as possible, eg if desired implement > a two phase commit when the LDA delivers new emails, so that all storage > servers confirm they have received the new email. You could if you wish > implement quorum support (ie some server which was offline for some mail > deliveries proxies requests to another storage block until it's caught > up syncing) > You are missing something here. My sync's due to issues maybe chaos. So both servers may have been running split from each other both received emails the other has not had users accessing them. Both with users in using the web and local email clients. While all that is going on the servers have to sync. This is very much the worst case. I am sane. I am prepared to give up the users ability to change client programs between servers to make it be able to work. So IMAP unique identifies not be replicated ever. Basically any identifier that cannot be based of a server id + a unique number for server be only unique to the server its on. Basically I cannot ensure quickly and most of the time I don't really need that. As long as the email without breakage is not lost in the server for greater than 15 min without reaching person wanting to read it that would be fine for normal operations. This is still faster than exchange working with pop email accounts. Basically Ed W. I am saying this is the worst I can get away with in a working office. I have gone through the protocals I would most likely ever need to use from a business point of view. pop3 I know basically does not really give a stuff if what is hiding behind is multi master or single master. User might receive a few extra emails if they change between servers. Nothing system killing. As long as the user gets the emails in the end that is the important bit if they a copy for each server bad luck at least they got the email. Too many copies is not a issue from business point of view not getting the copy in the first place is an issue. smtp messages directly from multi locations outgoing does not give a stuff. imap4 who ever invented this protocol for what I want todo I fell like strangling. The id system completely sends you to hell. Business point of view this might be a issue if uses change between servers due to having to download everything again. activesync/Z-push Ok nice. ID are 64 char in size with no defined contents. No ascending order no trouble basically. So nothing stopping me doing server_id:then unique number. So that is most mobile devices covered. Message might disappear when moving between not totally synced servers. Message will catch up as syncs do. So from business usage annoying but issue is not long lasting. Ie custom backend on Z-push and mobile devices will work mostly fine with chaos between the storage servers. MAPI is 64 chars to 512 chars. for ID's. Again nothing in protocol stopping server_id:then unique number. Web applications much of a muchness. Since either they will connect to the same server as the http server at each location so be protected or can be hooked onto a new protocol to know they are connecting to a multi server back end and detect if there are issues going on. Mostly as bad as activesync if you change between hosting locations email syncs might not have caught up with you so a message might disappear temp. So only imap4 is requiring syncing so ids are in order. Question does everyone need imap4 server locations to be interchangeable. I know I don't. Since most people out the office either use web mail or activesync. Only in office will be using imap4. Now I cannot see any fast sane way for imap4 for other than make it id only unique to each server and maybe create like imap 5 for multi server with the option to run locally as a imap5 to imap4 converter. Reason you ask server when it synced with X server and you find out that is older than the copies you have you don't replace. So the client is hiding server to server sync issues. Sometimes the best solution is look at everything and see what is limiting you and deprecate it. If we don't need id aligned we don't need real-time connection. We don't need as reliable of an network. So failures are less. I guess everyone who has tried to sync has attempted to battle the imap protocal. I am mostly the first strange person who has said stuff syncing imap and just go straight past its defect and make the storage work. Simple fault in imap design make the complete back end replication a pain in but when it should be so simple. I have decided of someone else wants imap to be synced let that be their problem. Simple each location stores what they receive. and forwards to all other locations as those locations come on line and the other locations do the reverse. I like the idea of natural event syncing. That the items pure naturally sync with each other. No reprocessing to force syncing due to least amount conflicting data created. Possible for pop MAPI and activesync/Z-push todo natural syncing. IMAP the evil thing just does not want to play ball with natural syncing and it wants to set up events of conflicting data. IMAP might force a real-time synced server in some cases. A master server handing out IMAP id numbers for new messages is one possibility so removing the need change id's on the mail after it is stored. If my web interfaces are using something other than IMAP I could possibly say use webmail until fixed. Worst issues I can see is message read status and other times like that. Where user might have marked a message unread at X on one server and at Y time marked it back read on a different server. But these are more niggles. Better to have the users annoyed by minor niggles and working than unable to work because its broken. Dependable replications the more parts you use the more areas you have for failure. So far my research on what is possible seams to be coming out to reasonable. Hopefully once I have this idea fully ironed out I can start getting into code. I rarely code. But this is a true case I have a problem so I have motivation. Peter Dolding

1 0

[Dovecot] virtual users
by Amira Othman 04 Jul '11

04 Jul '11

Hello All; Iam using dovecot-1.0.7-7.el5 and postfix-2.3.3-2.3.el5_6 on centos 5.6 I want to configure mail server without system account .I can send using the virtual account but can't receive and I have this in log file relay=local, delay=0.02, delays=0.02/0/0/0, dsn=5.1.1, status=bounced (unknown user: "hoda") my main.cf is myhostname = mail.domain.com mydomain = mydomain.com myorigin = $mydomain inet_interfaces = all mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mynetworks = *.*.*.*/24, 127.0.0.0/8 relay_domains = home_mailbox = Maildir/ #home_mailbox = Mailbox/ alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mail_spool_directory = /var/spool/mail #SASL configuration smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous #permit SASL suthentication is added smtpd_recipient_restrictions = permit_mynetworks permit_sasl_authenticated reject_unauth_destination smtpd_sender_restrictions = reject_unknown_sender_domain smtpd_sasl_local_domain = smtpd_sasl_authenticated_header = yes smtpd_tls_auth_only = no smtp_use_tls = yes smtpd_use_tls = yes smtp_tls_note_starttls_offer = yes smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom mailbox_command = /usr/bin/procmail-wrapper -o -a $DOMAIN -d $LOGNAME #Hide the login banner smtpd_banner = $myhostname ESMTP #Disable verify function and using of TLS transport encryption between server and client disable_vrfy_command = yes virtual_mailbox_base = /home/vmail/ virtual_mailbox_maps = hash:/etc/postfix/virtual virtual_uid_maps = static:511 virtual_gid_maps = static:512 virtual_alias_maps = hash:/etc/postfix/virtual sender_bcc_maps = hash:/etc/postfix/bcc my dovecot.conf if ## Dovecot configuration file protocols = imap imaps pop3 pop3s disable_plaintext_auth = no shutdown_clients = yes ## ## Logging ## log_path = /var/log/dovecot.log ## ## SSL settings ## ## ## Login processes ## mail_location = maildir:~/Maildir ## ## IMAP specific settings ## protocol imap { # list of plugins to load. mail_plugins = quota imap_quota #mail_plugin_dir = /usr/lib/dovecot/imap # The list is space-separated. #imap_client_workarounds = outlook-idle imap_client_workarounds = delay-newmail outlook-idle netscape-eoh } ## ## POP3 specific settings ## protocol pop3 { pop3_uidl_format = %08Xu%08Xv # Required on x86_64 kernels login_process_size = 64 # list of plugins to load. mail_plugins = quota #pop3_client_workarounds = pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } ## ## LDA specific settings ## protocol lda { # Address to use when sending rejection mails. postmaster_address = postmaster(a)example.com } ## ## Authentication processes ## # Executable location #auth_krb5_keytab = auth default { # NOTE: See also disable_plaintext_auth setting. mechanisms = plain login # authentication to actually work. <doc/wiki/PasswordDatabase.PAM.txt> passdb pam { } passdb passwd-file { # Path for passwd-file args = /etc/dovecot/passwd } userdb passwd { } userdb static { args = uid=511 gid=512 home=/home/vmail/%d/%n } user = root socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } dict { #quota = mysql:/etc/dovecot-dict-quota.conf } ## ## Plugin settings ## plugin { } Amira Othman Server Administrator <http://www.cairosource.com/> www.cairosource.com 6 EL Nil EL Abyad, Mohandiseen Cairo, Egypt Direct: +2 02 3303 7175 Mobile: +2 012 220 4165 The information transmitted is intended solely for the individual or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you have received this email in error please contact the sender and delete the material from any computer.

1 0

[Dovecot] Exim and Dovecot2 SASL: 435 Unable to authenticate at present
by Sergey Urushkin 04 Jul '11

04 Jul '11

Hi. I had working Exim 4.71 and Dovecot 1.2.9 SASL configuration on Ubuntu Lucid, but needed some features from dovecot2, so I installed 2.0.13 from https://launchpad.net/~carsten-uppenbrink-net/+archive/dovecot2 . Now I get Subj error while trying to authenticate via dovecot auth-client socket. However IMAP auth works fine with 2.0.13 and smtp auth worked fine until upgrade, so I think there is something wrong with dovecot2. Dovecot logs stay empty even with auth_debug*, just one string "auth: Debug: Loading modules from bla...". But here is another information that may help. And if it's needed I can build dovecot myself to ensure that ppa-build isn't guilty. Or debug some another way. Thanks. dovecot -n: # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-31-server x86_64 Ubuntu 10.04.2 LTS auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login apop auth_verbose = yes disable_plaintext_auth = no first_valid_gid = 8 first_valid_uid = 8 hostname = mail.domain.lan last_valid_gid = 8 last_valid_uid = 8 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = * mail_gid = mail mail_location = maildir:~/ mail_plugins = " quota trash" mail_privileged_group = mail mail_uid = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = scheme=CRAM-MD5 username_format=%n /etc/dovecot/passwd.d/%d.passwd driver = passwd-file } plugin { autocreate = Trash autocreate2 = Junk autocreate3 = Drafts autocreate4 = Templates autocreate5 = Sent autosubscribe = Trash autosubscribe2 = Junk autosubscribe3 = Drafts autosubscribe4 = Templates autosubscribe5 = Sent quota = maildir:user quota quota_rule = *:storage=200M sieve = ~/dovecot.sieve sieve_dir = ~/sieve trash = /etc/dovecot/dovecot-trash.conf.ext } postmaster_address = postmaster(a)domain.lan protocols = " imap sieve pop3 sieve" service auth { unix_listener auth-client { mode = 0600 user = Debian-exim } unix_listener auth-userdb { mode = 0600 user = mail } } service managesieve-login { inet_listener sieve_deprecated { port = 2000 } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = username_format=%n /etc/dovecot/passwd.d/%d.passwd driver = passwd-file } protocol lda { mail_plugins = " quota trash sieve" } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags mail_plugins = " quota trash imap_quota" } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } ################## swaks --to test(a)domain.lan --from=test(a)domain.lan --auth --auth-user=test(a)domain.lan --auth-password=111111 --server 127.0.0.1 -tlsc: (the same without tls, apop) === Trying 127.0.0.1:465... === Connected to 127.0.0.1. === TLS started w/ cipher DHE-RSA-AES256-SHA <~ 220 mail.domain.lan, ESMTP ready ~> EHLO mail.domain.lan <~ 250-mail.domain.lan Hello mail.domain.lan [127.0.0.1] <~ 250-SIZE 26214400 <~ 250-PIPELINING <~ 250-AUTH PLAIN LOGIN <~ 250 HELP ~> AUTH LOGIN <~* 435 Unable to authenticate at present ~> AUTH PLAIN AHRlc3RAZG9tYWluLmxhbgAxMTExMTE= <~* 435 Unable to authenticate at present *** No authentication type succeeded ~> QUIT <~ 221 mail.domain.lan closing connection === Connection closed with remote host. ##################### exim -d+auth output: Exim version 4.71 uid=0 gid=0 pid=29270 D=fbb95cfd Berkeley DB: Berkeley DB 4.8.24: (August 14, 2009) Support for: crypteq iconv() IPv6 PAM Perl Expand_dlfunc GnuTLS move_frozen_messages Content_Scanning DKIM Old_Demime Lookups: lsearch wildlsearch nwildlsearch iplsearch cdb dbm dbmnz dnsdb dsearch ldap ldapdn ldapm mysql nis nis0 passwd pgsql sqlite Authenticators: cram_md5 cyrus_sasl dovecot plaintext spa Routers: accept dnslookup ipliteral iplookup manualroute queryprogram redirect Transports: appendfile/maildir/mailstore/mbx autoreply lmtp pipe smtp Fixed never_users: 0 Size of off_t: 8 GnuTLS compile-time version: 2.8.5 GnuTLS runtime version: 2.8.5 changed uid/gid: forcing real = effective uid=0 gid=0 pid=29270 auxiliary group list: <none> seeking password data for user "root": cache not available getpwnam() succeeded uid=0 gid=0 configuration file is /etc/exim4/exim4.conf log selectors = 0000cefe 00233821 cwd=/ 4 args: /usr/sbin/exim4 -bd -q30m -d+auth trusted user admin user seeking password data for user "Debian-exim": cache not available getpwnam() succeeded uid=103 gid=105 seeking password data for user "Debian-exim": using cached result getpwnam() succeeded uid=103 gid=105 seeking password data for user "mail": cache not available getpwnam() succeeded uid=8 gid=8 originator: uid=0 gid=0 login=root name=root 29270 LOG: MAIN 29270 IPv6 socket creation failed: Address family not supported by protocol 29270 LOG: MAIN 29270 Failed to create IPv6 socket for wildcard listening (Address family not supported by protocol): will use IPv4 29270 listening on all interfaces (IPv4) port 25 29270 LOG: MAIN 29270 IPv6 socket creation failed: Address family not supported by protocol 29270 LOG: MAIN 29270 Failed to create IPv6 socket for wildcard listening (Address family not supported by protocol): will use IPv4 29270 listening on all interfaces (IPv4) port 465 29270 pid written to /var/run/exim4/exim.pid 29270 changed uid/gid: running as a daemon 29270 uid=103 gid=105 pid=29270 29270 auxiliary group list: 105 999 29270 LOG: MAIN 29270 exim 4.71 daemon started: pid=29270, -q30m, listening for SMTP on port 25 (IPv4) and for SMTPS on port 465 (IPv4) 29270 set_process_info: 29270 daemon: -q30m, listening for SMTP on port 25 (IPv4) and for SMTPS on port 465 (IPv4) 29270 daemon running with uid=103 gid=105 euid=103 egid=105 29270 SIGALRM received 29270 1 queue-runner process running 29270 Listening... 29271 Starting queue-runner: pid 29271 29271 exec /usr/sbin/exim4 -q 29270 child 29271 ended: status=0x0 29270 0 queue-runner processes now running 29270 Listening... 29270 Connection request from 127.0.0.1 port 58341 29270 search_tidyup called 29270 1 SMTP accept process running 29270 Listening... 29279 sender_fullhost = [127.0.0.1] 29279 sender_rcvhost = [127.0.0.1] 29279 Process 29279 is handling incoming connection from [127.0.0.1] 29279 host in host_lookup? no (option unset) 29279 set_process_info: 29279 handling incoming connection from [127.0.0.1] I=[127.0.0.1]:465 29279 initializing GnuTLS as a server 29279 read D-H parameters from file 29279 initialized D-H parameters 29279 certificate file = /etc/ssl/certs/dovecot.pem 29279 key file = /etc/ssl/private/dovecot.pem 29279 initialized certificate stuff 29279 host in tls_verify_hosts? no (option unset) 29279 host in tls_try_verify_hosts? no (option unset) 29279 initialized GnuTLS session 29279 gnutls_handshake was successful 29279 cipher: TLS1.0:DHE_RSA_AES_256_CBC_SHA1:32 29279 host in host_reject_connection? no (option unset) 29279 duplicate IP address 127.0.0.1 (MX=-1) removed 29279 gethostbyname2 looked up these IP addresses: 29279 name=localhost address=::1 29279 name=localhost address=127.0.0.1 29279 host in sender_unqualified_hosts? yes (matched "localhost") 29279 duplicate IP address 127.0.0.1 (MX=-1) removed 29279 gethostbyname2 looked up these IP addresses: 29279 name=localhost address=::1 29279 name=localhost address=127.0.0.1 29279 host in recipient_unqualified_hosts? yes (matched "localhost") 29279 host in helo_verify_hosts? no (option unset) 29279 host in helo_try_verify_hosts? no (option unset) 29279 host in helo_accept_junk_hosts? no (option unset) 29279 SMTP>> 220 mail.domain.lan, ESMTP ready 29279 tls_do_write(7f10202175a0, 31) 29279 gnutls_record_send(SSL, 7f10202175a0, 31) 29279 outbytes=31 29279 Process 29279 is ready for new message 29279 smtp_setup_msg entered 29279 Calling gnutls_record_recv(7f102023f0c0, 7f1020241e40, 4096) 29279 SMTP<< EHLO mail.domain.lan 29279 mail.domain.lan in helo_lookup_domains? no (end of list) 29279 sender_fullhost = (mail.domain.lan) [127.0.0.1] 29279 sender_rcvhost = [127.0.0.1] (helo=mail.domain.lan) 29279 set_process_info: 29279 handling TLS incoming connection from (mail.domain.lan) [127.0.0.1] I=[127.0.0.1]:465 29279 host in pipelining_advertise_hosts? yes (matched "*") 29279 host in auth_advertise_hosts? yes (matched "*") 29279 tls_do_write(7f10202229c8, 119) 29279 gnutls_record_send(SSL, 7f10202229c8, 119) 29279 outbytes=119 29279 SMTP>> 250-mail.domain.lan Hello mail.domain.lan [127.0.0.1] 29279 250-SIZE 26214400 29279 250-PIPELINING 29279 250-AUTH PLAIN LOGIN 29279 250 HELP 29279 Calling gnutls_record_recv(7f102023f0c0, 7f1020241e40, 4096) 29279 SMTP<< AUTH LOGIN 29279 dovecot authentication 29279 received: VERSION 1 1 29279 received: MECH PLAIN plaintext 29279 received: MECH LOGIN plaintext 29279 received: MECH APOP private dictionary active 29279 received: SPID 29280 29279 received: CUID 1 29279 received: COOKIE cf735efce15b21bbb10568c4a762017c 29279 SMTP>> 435 Unable to authenticate at present 29279 tls_do_write(7f10202175a0, 39) 29279 gnutls_record_send(SSL, 7f10202175a0, 39) 29279 outbytes=39 29279 LOG: MAIN REJECT 29279 auth_login authenticator failed for (mail.domain.lan) [127.0.0.1] I=[127.0.0.1]:465: 435 Unable to authenticate at present: authentication socket protocol error 29279 Calling gnutls_record_recv(7f102023f0c0, 7f1020241e40, 4096) 29279 SMTP<< AUTH PLAIN AHRlc3RAZG9tYWluLmxhbgAxMTExMTE= 29279 host in smtp_accept_max_nonmail_hosts? yes (matched "*") 29279 dovecot authentication 29279 received: VERSION 1 1 29279 received: MECH PLAIN plaintext 29279 received: MECH LOGIN plaintext 29279 received: MECH APOP private dictionary active 29279 received: SPID 29280 29279 received: CUID 2 29279 received: COOKIE 06f8b3d9441b40b4069f53cdd0d128a4 29279 SMTP>> 435 Unable to authenticate at present 29279 tls_do_write(7f10202175a0, 39) 29279 gnutls_record_send(SSL, 7f10202175a0, 39) 29279 outbytes=39 29279 LOG: MAIN REJECT 29279 auth_plain authenticator failed for (mail.domain.lan) [127.0.0.1] I=[127.0.0.1]:465: 435 Unable to authenticate at present: authentication socket protocol error 29279 Calling gnutls_record_recv(7f102023f0c0, 7f1020241e40, 4096) 29279 SMTP<< QUIT 29279 SMTP>> 221 mail.domain.lan closing connection 29279 tls_do_write(7f10202175a0, 37) 29279 gnutls_record_send(SSL, 7f10202175a0, 37) 29279 outbytes=37 29279 tls_close(): shutting down TLS 29279 LOG: smtp_connection MAIN 29279 SMTP connection from (mail.domain.lan) [127.0.0.1] I=[127.0.0.1]:465 closed by QUIT 29279 search_tidyup called 29270 child 29279 ended: status=0x0 29270 0 SMTP accept processes now running 29270 Listening... -- Best regards, Sergey Urushkin

3 2

[Dovecot] Replication problem I have. And how I think I can get around problem.
by Peter Dolding 04 Jul '11

04 Jul '11

I have two servers in two different locations. Neither what you would call 100 percent safe from being turned off. Most staff use web based email. This backs onto imap server. I do know I will have to deal with contact lists and other items. in that client. Worst part is the link between them may get broken so both servers may be receiving email and back active at the same time. I can see 1 very clear way around this problem. If I accept that the imap ids at each of the server will be that server only. Since users are mostly using webbased they are not going to notice. If they do notice because they have connected to a different domain address stiff bad luck. Now what I need to be able to deal with the problem. 1 a unique server id on each message for the server the message was received on. 1 a unique server receive id for each message as imap like id for service recieved messages for message received directly not synced. 1 logs for messages deleted and changes that are not current server server id. This should be pritty simple todo. Basically 1 log per server flushed when synced with the server it owns to. 1 a sync function that deletes and changes messages that have been deleted or changed at other locations and compares other servers current messages against copies retained at the mirroring location. Now with this. Each new message to each store gets the next imap id along with system wide unique combination of sever id and service receive id. No modifications of already recieved messages ids. Since I am not careing if the imap id are matched between servers. Fairly much able to use a custom for of imap syncing working off the server id's and server receive ids. Of course this solution should be fairly fault torrent. Since each server can directly store any message they receive. Also it should be possible to trace back to what server the message came from in case of spam problems or equal. Now my biggest problem can I attach my own custom attributes to incoming mail to the store and access that information effectively. Since with that information I will be able to do a form of live synced storage. Personally I see imap id design as a defect in protocal since it never allowed server id along with it this is why imap 100 percent synced message stores cannot be run on independent servers with unstable network connects well. Nothing comes without a price. This solution does not require clustered file systems or a constant active connection between servers so able to operate in areas of disruption. It does not block the servers from receiving emails at any time either. Problem is of course is if someone connects a client directly from 1 server to another. Mail will have to be re-downloaded. Also I have to check of z-push/ActiveSync depends on the imap ids being dependable across the network if not most hand held devices will not be a problem. If it don't then only imap has a problem. I can live with that. Ie if local email server down use web mail until local mail server is fixed. Old rule of networking 40 to 50 percent functional network staff can normally still get stuff done. 0 percent functional you have downtime. Now if I can get the email storage fault torrent and to remain operational in case of fault I then can focus on getting the web base applications using a equal system for contacts and other things. So each location can remain fairly operational no matter what. This way if a server disappeared for good only thing that would have to be changed is syncing. Wise move is to allow servers to be defined more than 1 server id. Ie a server gone for good remaining server gets told to take over responsibility for the old servers id messages. New replacement server given a new id and everything keeps on going nice. Anyone else with a better idea or advice how to add my own custom ids in a way they cannot be distrupted and are simple to search. If it works push for server id's in imap5? Ie imap5 clients being able to cope with the event that an email store is spreed between multi servers that may not be connected all the time. Peter Dolding

2 1

[Dovecot] Dovecot error on rhel 6.1 using GFS2(bug)
by Aliet Santiesteban Sifontes 04 Jul '11

04 Jul '11

Hi, just to let you know to all the people testing dovecot in a RHEL 6.1 setup where nodes are Active/Active and sharing a GFS2 filesystem that there is a bug on latest rhel6.1 GFS2 kernel modules, and latest updates in 6.0 wich makes dovecot crash a GFS2 filesystem, with a corruption and other related errors, redhat people have posted a fix for the kernel wich is in QA: https://bugzilla.redhat.com/show_bug.cgi?id=712139 Just hope this helps somebody to don't waste many nights looking for a problem in dovecot config :) as I did... best regards, Aliet

1 0

[Dovecot] Invitation to connect on LinkedIn
by Marcelo Salhab Brogliato via LinkedIn 03 Jul '11

03 Jul '11

LinkedIn ------------ Marcelo Salhab Brogliato requested to add you as a connection on LinkedIn: ------------------------------------------ Michael A., I'd like to add you to my professional network on LinkedIn. - Marcelo Salhab Accept invitation from Marcelo Salhab Brogliato http://www.linkedin.com/e/458g9e-gpoedy6h-6q/V7LnuFRIQXpYNGb2yum6IE4IQU3ZkP… View invitation from Marcelo Salhab Brogliato http://www.linkedin.com/e/458g9e-gpoedy6h-6q/V7LnuFRIQXpYNGb2yum6IE4IQU3ZkP… ------------------------------------------ DID YOU KNOW that LinkedIn can find the answers to your most difficult questions? Post those vexing questions on LinkedIn Answers to tap into the knowledge of the world's foremost business experts: http://www.linkedin.com/e/458g9e-gpoedy6h-6q/ask/inv-23/ -- (c) 2011, LinkedIn Corporation

1 0

[Dovecot] auth error using director
by Angel L. Mateo 01 Jul '11

01 Jul '11

Hello, I am trying to configure director as described at http://wiki2.dovecot.org/Director. I have previously tried the proxy and it worked. The problem I have is that whenever I try to connect I get the error: Jul 1 11:41:41 myotis40 dovecot: pop3-login: Error: auth: connect(director) failed: No such file or directory This is my doveconf -n: # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-4-amd64 x86_64 Ubuntu 10.04.2 LTS auth_cache_size = 1 k auth_debug = yes auth_verbose = yes default_process_limit = 256 director_mail_servers = 155.54.211.161 155.54.211.169 director_servers = 155.54.211.170 disable_plaintext_auth = no dotlock_use_excl = no hostname = myotis30 log_timestamp = %Y-%m-%d %H:%M:%S mail_debug = yes mail_fsync = always mail_location = maildir:~/Maildir:INDEX=/var/indexes/%n mail_nfs_storage = yes mail_privileged_group = mail maildir_stat_dirs = yes mdbox_rotate_size = 20 M namespace { inbox = yes location = prefix = separator = / } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve zlib_save = gz zlib_save_level = 6 } postmaster_address = postmaster(a)um.es protocols = " pop3" service auth { unix_listener auth-userdb { mode = 0666 } } service imap-login { executable = imap-login director } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix user = postfix } } service pop3-login { executable = pop3-login director } ssl = no ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lda { mail_plugins = " sieve" } -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

1 1

[Dovecot] ldapsearch dump for passwd file: base64 encoded passwords
by Denny Schierz 01 Jul '11

01 Jul '11

hi, is there a way, to let Dovecot2 uses the base64 encoded passwords from a ldapsearch output, without decode them first? cu denny

2 2

[Dovecot] Dovecot 2.0, mysql and quota
by Claudio Prono 01 Jul '11

01 Jul '11

Hello all, I have some troubles to make the quota_check working with dovecot 2.0. My config is the following: postfix, dovecot as lda, mysql as virtual mailuser backend, and postfixadmin for the mailuser administration. Previously i have a working setup with dovecot 1.x, now with the 2.0 something is wrong about the quota, but i don't know what... Here is my config: # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.37.6-0.5-desktop x86_64 openSUSE 11.4 (x86_64) ext3 auth_mechanisms = plain login first_valid_gid = 51 first_valid_uid = 51 info_log_path = /var/log/dovecot-inf.log last_valid_gid = 51 last_valid_uid = 51 log_path = /var/log/dovecot-err.log mail_home = /var/mail/virtual/%d/%u/ mail_location = maildir:/var/mail/virtual/%d/%u managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { hidden = no inbox = yes list = yes location = prefix = INBOX. subscriptions = yes type = private } passdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } plugin { quota = maildir:User quota quota_warning = storage=80%% /usr/bin/quota_warning.sh 80 quota_warning2 = storage=90%% /usr/bin/quota_warning.sh 90 quota_warning3 = storage=99%% /usr/bin/quota_warning.sh 90 sieve = /var/mail/virtual/%d/%u/.dovecot.sieve sieve_storage = /var/mail/virtual/%d/%u/sieve } protocols = imap pop3 sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { mode = 0600 } unix_listener auth-userdb { group = nobody mode = 0660 user = postfix } } service imap-login { inet_listener imap { address = 127.0.0.1 port = 143 } } service managesieve-login { executable = /usr/lib/dovecot/managesieve-login } service managesieve { executable = /usr/lib/dovecot/managesieve } service quota-warning { executable = script /usr/bin/quota_warning.sh user = postfix } ssl = no userdb { driver = passwd } userdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } protocol imap { imap_client_workarounds = mail_plugins = quota imap_quota } protocol sieve { managesieve_max_line_length = 65536 plugin { sieve = /var/mail/virtual/%d/%u/.dovecot.sieve sieve_storage = /var/mail/virtual/%d/%u/sieve } } protocol pop3 { mail_plugins = quota pop3_uidl_format = UID%u-%v } protocol lda { auth_socket_path = /var/run/dovecot/auth-master log_path = /var/log/dovecot-lda.log mail_debug = yes mail_plugins = quota sieve postmaster_address = postmaster(a)mediaservice.net } My user query for mysql is the following: user_query = SELECT maildir, 51 AS uid, 51 AS gid, CONCAT('*:bytes=', mailbox.quota ) AS quota_rule FROM mailbox WHERE username = '%u' AND active = '1' I have made some test, with a test mailbox, with the quota setted to 1 Mb, in fact the maildirsize file contains: 1024000S When i write a mail, something strange is happening: with the debug mail of dovecot active i see this: Jun 29 17:42:19 lda: Debug: Loading modules from directory: /usr/lib64/dovecot/modules Jun 29 17:42:19 lda: Debug: Module loaded: /usr/lib64/dovecot/modules/lib10_quota_plugin.so Jun 29 17:42:19 lda: Debug: Module loaded: /usr/lib64/dovecot/modules/lib90_sieve_plugin.so Jun 29 17:42:19 auth: Info: mysql(127.0.0.1): Connected to database postfix Jun 29 17:42:19 lda: Debug: auth input: testquota(a)mediaservice.pri maildir=mediaservice.pri/testquota/ uid=51 gid=51 quota_rule=*:bytes=1024000 Jun 29 17:42:19 lda: Debug: Added userdb setting: plugin/maildir=mediaservice.pri/testquota/ Jun 29 17:42:19 lda: Debug: Added userdb setting: plugin/quota_rule=*:bytes=1024000 Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: Effective uid=51, gid=51, home=/var/mail/virtual/mediaservice.pri/testquota(a)mediaservice.pri/ Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: Quota root: name=User quota backend=maildir args= Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: Quota rule: root=User quota mailbox=* bytes=1024000 messages=0 Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: Quota warning: bytes=819200 (80%) messages=0 reverse=no command=/usr/bin/quota_warning.sh 80 Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: Quota warning: bytes=921600 (90%) messages=0 reverse=no command=/usr/bin/quota_warning.sh 90 Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: Quota warning: bytes=1013760 (99%) messages=0 reverse=no command=/usr/bin/quota_warning.sh 90 Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: Namespace : type=private, prefix=INBOX., sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/var/mail/virtual/mediaservice.pri/testquota@mediaservice.pri Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: maildir++: root=/var/mail/virtual/mediaservice.pri/testquota(a)mediaservice.pri, index=, control=, inbox=/var/mail/virtual/mediaservice.pri/testquota(a)mediaservice.pri Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: Quota root: name=User quota backend=maildir args= Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: Quota warning: bytes=0 (80%) messages=0 reverse=no command=/usr/bin/quota_warning.sh 80 Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: Quota warning: bytes=0 (90%) messages=0 reverse=no command=/usr/bin/quota_warning.sh 90 Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: Quota warning: bytes=0 (99%) messages=0 reverse=no command=/usr/bin/quota_warning.sh 90 Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: none: root=, index=, control=, inbox= Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: Destination address: testquota(a)mediaservice.pri (source: user@hostname) Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: sieve: user's script path /var/mail/virtual/mediaservice.pri/testquota(a)mediaservice.pri/.dovecot.sieve doesn't exist (using global script path in stead) Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: sieve: user has no valid personal script Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Debug: sieve: no scripts to execute: reverting to default delivery. Jun 29 17:42:19 lda(testquota(a)mediaservice.pri): Info: msgid=<4E0B47DA.9030607(a)atpss.net>: saved mail to INBOX First question: why i see two times the quota warning check? Anyway, if the 80% or 90% of the quota is fullfilled, no warning pops out.... I have also checked the query it does to mysql, is the following SELECT maildir, 51 AS uid, 51 AS gid, CONCAT('*:bytes=', mailbox.quota ) AS quota_rule FROM mailbox WHERE username = 'testquota(a)mediaservice.pri' AND active = '1' And the result, is the following: +-----------------------------+-----+-----+-----------------+ | maildir | uid | gid | quota_rule | +-----------------------------+-----+-----+-----------------+ | mediaservice.pri/testquota/ | 51 | 51 | *:bytes=1024000 | +-----------------------------+-----+-----+-----------------+ Seems right to me...but it is not working.... why? Ah, this is the content of the quota_warning.sh: #!/bin/sh PERCENT=$1 USER=$2 cat << EOF | /usr/local/libexec/dovecot/dovecot-lda -d $USER -o "plugin/quota=maildir:User quota:noenforcing" From: postmaster(a)mediaservice.pri Subject: quota warning Your mailbox is now $PERCENT% full. EOF Any hint about what is not working? Thanks, Claudio Prono. -- -------------------------------------------------------------------------------- Claudio Prono OPST System Developer Gsm: +39-349-54.33.258 @PSS Srl Tel: +39-011-32.72.100 Via San Bernardino, 17 Fax: +39-011-32.46.497 10141 Torino - ITALY http://atpss.net/disclaimer -------------------------------------------------------------------------------- PGP Key - http://keys.atpss.net/c_prono.asc

2 3

[Dovecot] rsync.dovecot.org
by Timo Sirainen 01 Jul '11

01 Jul '11

Looks like at least some people still want to rsync their own local dovecot.org mirrors, so I've now added rsync support back. Use rsync.dovecot.org as the host. You can rsync: hg dovecotweb dovecotwiki dovecotwiki2 and mbox files of mailing list archives: dovecotmail dovecotnewsmail dovecotcvsmail So for example: rsync -az rsync://rsync.dovecot.org/dovecotweb dovecotweb

1 0

[Dovecot] NFS mail storage
by Daniel L. Miller 30 Jun '11

30 Jun '11

The parameters listed for nfs installations (mmap_disable, doctlock_use_excl, mail_nfs_storage, mail_nfs_index) - are they necessary for data integrity, and/or do they compensate for NFS latency and improve performance? My understanding is the indexes are a critical part of a dbox storage, but on the other hand having local indexes is a major performance consideration. Is maildir a "better" choice under NFS than dbox? -- Daniel

5 7

[Dovecot] Fwd: share an IMAP folder ?
by Frank Bonnet 30 Jun '11

30 Jun '11

Aoops I forgot to write I use MBOX format but thinking to convert to the right format to be able to use shared mailboxes. ( any advices about this convertion welcome ! ) -------- Original Message -------- Subject: [Dovecot] share an IMAP folder ? Date: Thu, 30 Jun 2011 17:03:52 +0200 From: Frank Bonnet <f.bonnet(a)esiee.fr> To: dovecot(a)dovecot.org Hello Is it possible to share an Imap folder for a user with another one ? user a> imap-folder1 ^ user b>------| Could user a share his folder "imap-folder1" with user b in readonly mode ? I use "real" users ( not virtuals ) Thanks a lot.

1 0

[Dovecot] dovecot, mdbox and indexes
by Angel L. Mateo 30 Jun '11

30 Jun '11

Hello everybody, We are updating our old dovecot 1.1 servers to 2.0. We have a farm os servers, with users in nfs filesystems and indexes in local fs. Mail is stored in maildir format. We don't warrant that a user is always directed to the same server, although our load balancer sends all request from one IP to the same server (during a session time with a inactivity timeout). This is the second scenario described at http://wiki2.dovecot.org/NFS. We are now trying to migrate to the third scenario and using mdbox. As an intermediate step, we have configured this second scenario, but with indexes in NFS filesystems. The configuration is: * mmap_disable = yes * dotlock_use_excl = no * mail_nfs_storage = yes * mail_nfs_index = yes * lock_method = fcntl (we have also tried with dotlock) This configuration works without any problems with few users, but with high load, we have a lot of lock timeouts error like: Jun 29 10:24:04 myotis34 dovecot: imap(mpm): Error: Timeout (180s) while waiting for lock for transaction log file /home/pas/01/014601/maildir_indexes/.INBOX/dovecot.index.log These errors cause a corrupted index and we have to manually delete the user's index so he could read his mail again. So we are planning to configure the third scenario. In this configuration, we don't have any problem during our tests if we use maildir format. But if we use mdbox one, we have problems when we have to change the final server for the server (We allways send the user to the same final server, but sometimes, if the server is down, for example, this is not possible). The tests we have done (with POP) are: * I connect to "my" server. There's no problem. I have my mail. I delete a mail. * I connect then to a server that have no index for me. The only problem is that the previously deleted mail appears again. * I connect then to a server with an outdated index: this is the problem. I have only the messages in that outdated index. The mail received since then has disappeared (although I could receive new mail). How could I solve this problem? Is this really a problem? Should I use a shared storage for indexes? What is the best configuration for a high availability service? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

2 2

Re: [Dovecot] [Urgent] Email Retrieval from remote servers doesn't use Dovecot
by William Blunn 30 Jun '11

30 Jun '11

On 30/06/2011 14:08, Shazia Javed wrote: > Thank you for the reply. Now I have relatively better understanding of Dovecot and email service components (MUA, MTA, MRA, etc). However, I am still struggling with the relevant conceptual understanding, and need your help: > > I have installed 'getmail' as I read that it offers ease-of-use and is relatively more secure. So far I have managed to download emails from Inbox and Sent folder. All the downloaded emails go to single folder 'new' from 'Maildir' directory. Please tell me if there is a way (configuration) to download emails in respective folders. "getmail" appears to support delivery to an arbitrary Maildir folder. See "getmail" documentation. You might want to read up about Maildir to see how it works. In particular you need to know that mail is delivered to a directory "new" (the delivery process involves the directory "tmp", but the message isn't considered delivered until it reaches the directory "new"), but gets moved to a folder "cur" when the Maildir is looked at. So mail could be in either directory "new" or "cur". (The design of Maildir attempts to address various problems, and only partially succeeds, and in other cases makes things worse than they would have been otherwise. But despite its flaws, it still has some strengths, such as reliability, (relative) simplicity, wide support, and the ease by which a message store can be queried/interrogated.) > Also, is there any need for Dovecot now? As I see it, I have managed to download emails from remote servers in maildir format using getmail. How and why would Dovecot fit in? Will Dovecot (via deliver and sieve) assist in segregated email storage (i.e. INBOX in 'new', DRAFTS in '.draft/new' etc). It might be handy to have Dovecot installed as it would mean you could "see into" the mail folders using an IMAP client such as Thunderbird. This will probably make it easier to get a handle on which messages are in which folders than trying to look in the Maildir directories directly. IMAP has a special folder called "INBOX" which appears as the Inbox in most IMAP clients. Under Maildir, in the default location, INBOX can be found at ~/Maildir/{new,cur,tmp} Other folders are mapped into directories, for example the mail folder "Sent" will appear at ~/Maildir/.Sent/{new,cur,tmp} Nested mail folders are flattened into a single directory level in the filesystem, with the folder levels separated by dots, so the mail folder "Projects/PJ1" will appear at ~/Maildir/.Projects.PJ1/{new,cur,tmp} (The above is the default way for Maildir to work. However, Dovecot can be configured to map IMAP folders into Maildir directories in other ways.) Bill

1 0

[Dovecot] Problem accessing Dovecot mailing lists via IMAP
by William Blunn 30 Jun '11

30 Jun '11

I recently tried to look at the Dovecot mailing lists through an already-configured IMAP profile, which had worked fine in the past. But it failed saying that the authentication method was not supported. http://www.dovecot.org/mailinglists.html says: "You can get access to the IMAP archives by using *dovecot.org* as the hostname, *anonymous* as the username and an empty password. It's also possible to use ANONYMOUS authentication mechanism if your client supports it (few do)." I noticed that my e-mail client was configured to use the server "imap.dovecot.org", so I changed it to "dovecot.org". But it still complains that the authentication method is not supported. I am using Thunderbird 3.1 over Windows 7 64-bit. Thunderbird was configured for "Password, Transmitted insecurely" (and this option was not working). I have tried the other authentication options available in Thunderbird. "Encrypted password": Does not work; same problem "Kerberos / GSSAPI": Does not work; same problem "NTLM": Does not work; same problem Any ideas? Bill

3 3

[Dovecot] what to expect from changing index location
by Davide Vaghetti 30 Jun '11

30 Jun '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello everybody, I have one thousand virtual users with mdbox mailbox format and 10 GByte quota. I have noticed some performance problem related to I/O (the mailbox disk is a 6TB raid1+0 on ISCSI), so I want to put the index files on a different disk. My actual mail_location is: mail_location = mdbox:/var/vmail/%-1.1u/%u/mdbox and I want to switch to mail_location = mdbox:/var/vmail/%-1.1u/%u/mdbox:INDEX=/var/indexes/%-1.1u/%u/ But I cannot figure out a pair of things: - - do the switch trigger the rebuilding of the index files? - - can I get rid of all the old index files? - - how much the index files (no fts squat) can grow? thanks in advance bye davide - -- Dott. Davide Vaghetti Centro Servizi Informatici Facolta' di Ingegneria Universita' di Pisa PGP: http://keys.keysigning.org:11371/pks/lookup?op=get&search=0x7A1B3BA18C4E0A4D -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk4J/Z4ACgkQehs7oYxOCk3QagCfd+yVvR2Ps6hbjZOCumn2Wx2W 6cgAnjOvQDfe1O9jDOAbp4k0deEmytd3 =ZJFQ -----END PGP SIGNATURE-----

4 8

[Dovecot] Mbox corruption - Inbox beginning with 'FFrom'
by Uwe Klaus 30 Jun '11

30 Jun '11

I have two accounts where the inboxes sometimes get corrupted. In that case they begin with "FFrom". I saw similar reports in July/August last year. So I applied the patch http://dovecot.org/pipermail/dovecot/attachments/20100720/e87b32ae/attachme… Yesterday a mbox corruption happened again. Here are the log lines. Jun 29 18:08:12 mail dovecot: pop3-login: Login: user=<xxxxxx>, method=PLAIN, rip=92.229.xxx.xxx, lip=194.94.211.50, TLS Jun 29 18:08:12 mail dovecot: POP3(xxxxxx): Disconnected: Logged out top=0/0, retr=0/0, del=0/76, size=32800751 Jun 29 18:09:12 mail dovecot: pop3-login: Login: user=<xxxxxx>, method=PLAIN, rip=92.229.xxx.xxx, lip=194.94.211.50, TLS Jun 29 18:09:12 mail dovecot: POP3(xxxxxx): Disconnected: Logged out top=0/0, retr=0/0, del=0/76, size=32800751 Jun 29 18:09:48 mail dovecot: deliver(xxxxxx): sieve: msgid=<D0FBDD35-A53D-4940-A770-DDA06AD0E70B(a)hgb-leipzig.de>: stored mail into mailbox 'INBOX' Jun 29 18:09:48 mail sm-mta[27493]: p5TFl24L014636: to=xxxxxx, delay=00:22:46, xdelay=00:00:00, mailer=local, pri=17899944, dsn=2.0.0, stat=Sent Jun 29 18:10:12 mail dovecot: pop3-login: Login: user=<xxxxxx>, method=PLAIN, rip=92.229.xxx.xxx, lip=194.94.211.50, TLS Jun 29 18:10:13 mail dovecot: POP3(xxxxxx): mbox got corrupted, state=1 Jun 29 18:10:13 mail dovecot: POP3(xxxxxx): mbox got corrupted, state=2 Jun 29 18:10:13 mail dovecot: POP3(xxxxxx): mbox got corrupted, state=4 Jun 29 18:10:13 mail dovecot: POP3(xxxxxx): Disconnected: Logged out top=0/0, retr=1/2066, del=6/77, size=32802800 Jun 29 18:11:12 mail dovecot: pop3-login: Login: user=<xxxxxx>, method=PLAIN, rip=92.229.xxx.xxx, lip=194.94.211.50, TLS Jun 29 18:11:12 mail dovecot: POP3(xxxxxx): Disconnected: Logged out top=0/0, retr=0/0, del=0/71, size=32777356 Jun 29 18:12:12 mail dovecot: pop3-login: Login: user=<xxxxxx>, method=PLAIN, rip=92.229.xxx.xxx, lip=194.94.211.50, TLS Jun 29 18:12:12 mail dovecot: POP3(xxxxxx): Disconnected: Logged out top=0/0, retr=0/0, del=0/71, size=32777356 Jun 29 18:19:12 mail dovecot: pop3-login: Login: user=<xxxxxx>, method=PLAIN, rip=92.229.xxx.xxx, lip=194.94.211.50, TLS Jun 29 18:19:12 mail dovecot: POP3(xxxxxx): Disconnected: Logged out top=0/0, retr=0/0, del=0/71, size=32777356 Jun 29 18:19:56 mail dovecot: deliver(xxxxxx): mbox got corrupted, state=0 Jun 29 18:19:56 mail dovecot: deliver(xxxxxx): sieve: msgid=<20110629175547.33981yt5jzia7f9f(a)mail.hgb-leipzig.de>: failed to store into mailbox 'INBOX': Mailbox isn't a valid mbox file Jun 29 18:19:56 mail dovecot: deliver(xxxxxx): sieve: script /home/xxxxxx/.dovecot.sieve failed with unsuccessful implicit keep Jun 29 18:19:57 mail sm-mta[12213]: p5TFvI0W029582: to=xxxxxx, delay=00:22:39, xdelay=00:00:01, mailer=local, pri=17900128, dsn=2.0.0, stat=Sent Jun 29 18:20:12 mail dovecot: pop3-login: Login: user=<xxxxxx>, method=PLAIN, rip=92.229.xxx.xxx, lip=194.94.211.50, TLS Jun 29 18:20:12 mail dovecot: POP3(xxxxxx): mbox got corrupted, state=0 Jun 29 18:20:12 mail dovecot: POP3(xxxxxx): Couldn't init INBOX: Mailbox isn't a valid mbox file Jun 29 18:20:12 mail dovecot: POP3(xxxxxx): Mailbox init failed top=0/0, retr=0/0, del=0/0, size=0 After removing the first "F": Jun 29 19:06:11 mail dovecot: pop3-login: Login: user=<xxxxxx>, method=PLAIN, rip=77.5.xxx.xxx, lip=194.94.211.50, TLS Jun 29 19:06:13 mail dovecot: POP3(xxxxxx): Disconnected: Logged out top=0/0, retr=2/4502, del=0/73, size=32781824 # dovecot --version 1.2.17 # dovecot -n # 1.2.17: /usr/pkg/etc/dovecot.conf Warning: fd limit 128 is lower than what Dovecot can use under full load (more than 768). Either grow the limit or change login_max_processes_count and max_mail_processes settings # OS: NetBSD 5.1_STABLE amd64 protocols: imap imaps pop3 pop3s ssl_key_file: /etc/openssl/certs/dovecot.pem disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/pkg/libexec/dovecot/imap-login login_executable(imap): /usr/pkg/libexec/dovecot/imap-login login_executable(pop3): /usr/pkg/libexec/dovecot/pop3-login first_valid_uid: 400 last_valid_uid: 10000 mail_location: mbox:~/mail:INBOX=/var/mail/%u:INDEX=/var/indexes/%u mail_executable(default): /usr/pkg/libexec/dovecot/imap mail_executable(imap): /usr/pkg/libexec/dovecot/imap mail_executable(pop3): /usr/pkg/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/pkg/lib/dovecot/imap mail_plugin_dir(imap): /usr/pkg/lib/dovecot/imap mail_plugin_dir(pop3): /usr/pkg/lib/dovecot/pop3 pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %08Xv%08Xu lda: postmaster_address: postmaster(a)hgb-leipzig.de mail_plugins: sieve auth default: username_format: %Lu verbose: yes passdb: driver: passwd userdb: driver: passwd plugin: sieve: ~/.dovecot.sieve sieve_global_path: /var/lib/dovecot/sieve/default.sieve sieve_dir: ~/sieve sieve_global_dir: /var/lib/dovecot/sieve/global/ Regards, Uwe

1 0

[Dovecot] Migrating shared folders from courier-imap to dovecot
by Tom Clark 30 Jun '11

30 Jun '11

Hi, I'm hoping you'll be able to help. I'm working on a project to migrate our users from a courier-imap (4.3.0) based mail server to a dovecot (2.0.8) mail server. I have got all the users migrated and working. However, I can't see how to migrate the shared folders from courier-imap. I have tried to find extra information all the migration information seems to centre around a user mailbox rather than shared mailboxes. Is it simply a case of setting up the shared folders on dovecot, then copying the messages in, finally running the dovecot migration script across them? Any advice would be greatly appreciated. Thanks, Tom

2 4

[Dovecot] LMTP returncode 450?
by Peter Mogensen 30 Jun '11

30 Jun '11

Hi, How do I get the LMTP-server to know which mailbox's are locally hosted and return SMTP code 450 if delivery is attempted to a non local user? I can see that a lookup in the userdb is done, but now matter what I return (1/111) from my checkpassword script I just get: 451 4.3.0 <lp(a)domain.tld> Internal error occurred. Refer to server log for more information. /Peter

2 3

[Dovecot] lda root vs lda postfix
by ml＠smtp.fakessh.eu 30 Jun '11

30 Jun '11

hello folks hello Timo I am facing a new problem I'm using dovecot LDA to deliver the emails now root of the system emails are delivered in the box to the letter of the postfix directory /vap/spool/postfix I do not know what to do to redirect mail from root to root -- http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x092164A7 gpg --keyserver pgp.mit.edu --recv-key 092164A7

2 2