hey Christian, Thanks so much for your feedback. I am still getting an error.
[root@mail tmp]# nano /etc/dovecot/dovecot.conf [root@mail tmp]# service dovecot restart Stopping Dovecot Imap: [FAILED] Starting Dovecot Imap: doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf line 19: Expecting '=' doveconf: Error: managesieve-login: dump-capability process returned 89 doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf line 19: Expecting '=' [FAILED]
Below is the output of dovecot.conf. Cant figure out why.
[root@mail tmp]# cat /etc/dovecot/dovecot.conf
# Listen addresses. # - '*' means all available IPv4 addresses. # - '[::]' means all available IPv6 addresses. # Listen on all available addresses by default listen = * [::]
#base_dir = /var/run/dovecot mail_plugins = quota
# Enable fts fts_solr plugin globally for Solr Full Text Search Indexing mail_plugins = $mail_plugins fts fts_solr
plugin { fts = solr #break-imap-search will use solr for indexing TEXT and BODY searches. fts_solr = break-imap-search url=http://127.0.0.1:8983/solr/ fts_autoindex = yes } acl
# Enabled mail protocols. protocols = pop3 imap sieve lmtp
# User/group who owns the message files: mail_uid = 2000 mail_gid = 2000
# Assign uid to virtual users. first_valid_uid = 2000 last_valid_uid = 2000
# Logging. Reference: http://wiki2.dovecot.org/Logging log_path = /var/log/dovecot.log mail_debug = no auth_verbose = no auth_debug = no auth_debug_passwords = no # Possible values: no, plain, sha1. auth_verbose_passwords = no
# SSL: Global settings. # Refer to wiki site for per protocol, ip, server name SSL settings: # http://wiki2.dovecot.org/SSL/DovecotConfiguration ssl_protocols = !SSLv2 !SSLv3 ssl = required verbose_ssl = no #ssl_ca =</path/to/ca ssl_cert = </etc/pki/tls/certs/iRedMail.crt ssl_key = </etc/pki/tls/private/iRedMail.key
# With disable_plaintext_auth=yes AND ssl=required, STARTTLS is mandatory. # Set disable_plaintext_auth=no AND ssl=yes to allow plain password transmitted # insecurely. disable_plaintext_auth = yes # Allow plain text password per IP address/net #remote 192.168.0.0/24 { # disable_plaintext_auth = no #}
# Mail location and mailbox format. mail_location = maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/
# Authentication related settings. # Append this domain name if client gives empty realm. auth_default_realm =
# Authentication mechanisms. auth_mechanisms = PLAIN LOGIN
# Limits the number of users that can be logging in at the same time. # Default is 100. # Note: this value can be overrided by "process_limit =" in service protocol. # e.g. # protocol imap-login { # ... # process_limit = 500 # } #default_process_limit = 100
service auth { unix_listener /var/spool/postfix/private/dovecot-auth { user = postfix group = postfix mode = 0666 } unix_listener auth-master { user = vmail group = vmail mode = 0666 } unix_listener auth-userdb { user = vmail group = vmail mode = 0660 } }
# LMTP server (Local Mail Transfer Protocol). # Reference: http://wiki2.dovecot.org/LMTP service lmtp { user = vmail
# For higher volume sites, it may be desirable to increase the number of
# active listener processes. A range of 5 to 20 is probably good for most
# sites.
process_min_avail = 5
# Logging.
# Require 'info_log_path =' in 'protocol lmtp {}' block.
executable = lmtp -L
# Listening on socket file and TCP
unix_listener /var/spool/postfix/private/dovecot-lmtp {
user = postfix
group = postfix
mode = 0600
}
inet_listener lmtp {
#address = 192.168.0.24 127.0.0.1 ::1
port = 24
}}
# Virtual mail accounts. userdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } passdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql }
# Master user. # Master users are able to log in as other users. It's also possible to # directly log in as any user using a master password, although this isn't # recommended. # Reference: http://wiki2.dovecot.org/Authentication/MasterUsers auth_master_user_separator = * passdb { driver = passwd-file args = /etc/dovecot/dovecot-master-users master = yes }
plugin { auth_socket_path = /var/run/dovecot/auth-master
quota = dict:user::proxy::quotadict
quota_rule = *:storage=1G
#quota_rule2 = *:messages=0
#quota_rule3 = Trash:storage=1G
#quota_rule4 = Junk:ignore
# Quota warning.
# If user suddenly receives a huge mail and the quota jumps from
# 85% to 95%, only the 95% script is executed.
quota_warning = storage=85%% quota-warning 85 %u
quota_warning2 = storage=90%% quota-warning 90 %u
quota_warning3 = storage=95%% quota-warning 95 %u
# Plugin: autocreate. Create and subscribe to default IMAP folders.
autocreate = INBOX
autocreate2 = Sent
autocreate3 = Trash
autocreate4 = Drafts
autocreate5 = Junk
autosubscribe = INBOX
autosubscribe2 = Sent
autosubscribe3 = Trash
autosubscribe4 = Drafts
autosubscribe5 = Junk
# Plugin: expire.
#expire = Trash 7 Trash/* 7 Junk 30
#expire_dict = proxy::expire
# ACL and share folder
acl = vfile
acl_shared_dict = proxy::acl
# By default Dovecot doesn't allow using the IMAP "anyone" or
# "authenticated" identifier, because it would be an easy way to spam
# other users in the system. If you wish to allow it,
#acl_anyone = allow
# Pigeonhole managesieve service.
# Reference: http://wiki2.dovecot.org/Pigeonhole/Sieve/Configuration
# Per-user sieve settings.
sieve_dir = /%Lh/sieve
sieve = /%Lh/sieve/dovecot.sieve
# Global sieve settings.
sieve_global_dir = /var/vmail/sieve
# Note: if user has personal sieve script, global sieve rules defined in
# sieve_default will be ignored. Please use sieve_before or
# sieve_after instead.
#sieve_default =
sieve_before = /var/vmail/sieve/dovecot.sieve
#sieve_after =
# The maximum number of redirect actions that can be performed during a
# single script execution. The meaning of 0 differs based on your version.
# For versions v0.3.0 and beyond this means that redirect is prohibited.
# For older versions, however, this means that the number of redirects is
# unlimited, so be careful.
#sieve_max_redirects = 4}
service quota-warning { executable = script /usr/local/bin/dovecot-quota-warning.sh unix_listener quota-warning { user = vmail group = vmail mode = 0660 } }
service dict { unix_listener dict { mode = 0660 user = vmail group = vmail } }
dict { #expire = db:/var/lib/dovecot/expire/expire.db quotadict = mysql:/etc/dovecot/dovecot-used-quota.conf acl = mysql:/etc/dovecot/dovecot-share-folder.conf }
protocol lda { # Reference: http://wiki2.dovecot.org/LDA mail_plugins = $mail_plugins sieve autocreate auth_socket_path = /var/run/dovecot/auth-master log_path = /var/log/dovecot-sieve.log lda_mailbox_autocreate = yes postmaster_address = root }
protocol lmtp { # Log file info_log_path = /var/log/dovecot-lmtp.log
# Plugins
mail_plugins = quota# Enable fts fts_solr plugin globally for Solr Full Text Search Indexing mail_plugins = $mail_plugins fts fts_solr
plugin {
fts = solr#break-imap-search will use solr for indexing TEXT and BODY searches. fts_solr = break-imap-search url=http://127.0.0.1:8983/solr/ fts_autoindex = yes } sieve postmaster_address = postmaster
lmtp_save_to_detail_mailbox = yes
recipient_delimiter = +}
protocol imap { mail_plugins = $mail_plugins imap_quota autocreate imap_acl imap_client_workarounds = tb-extra-mailbox-sep
# Maximum number of IMAP connections allowed for a user from eachIP address. # NOTE: The username is compared case-sensitively. # Default is 10. # Increase it to avoid issue like below: # "Maximum number of concurrent IMAP connections exceeded" mail_max_userip_connections = 20 } protocol pop3 { mail_plugins = $mail_plugins pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv
# Maximum number of IMAP connections allowed for a user from eachIP address. # NOTE: The username is compared case-sensitively. # Default is 10. mail_max_userip_connections = 20 }
# Login processes. Refer to Dovecot wiki for more details: # http://wiki2.dovecot.org/LoginProcess service imap-login { service_count = 1
# To avoid startup latency for new client connections, set process_min_avail
# to higher than zero. That many idling processes are always kept around
# waiting for new connections.
#process_min_avail = 0
# number of simultaneous IMAP connections
#process_limit = $default_process_limit
process_limit = 500
# vsz_limit should be fine at its default 64MB value
#vsz_limit = 64M} service pop3-login { service_count = 1
# number of simultaneous POP3 connections
#process_limit = 500}
namespace { type = private separator = / prefix = #location defaults to mail_location. inbox = yes }
namespace { type = shared separator = / prefix = Shared/%%u/ location = maildir:/%%Lh/Maildir/:INDEX=/%%Lh/Maildir/Shared/%%u # this namespace should handle its own subscriptions or not. subscriptions = yes list = children }
# Public mailboxes. # Refer to Dovecot wiki page for more details: # http://wiki2.dovecot.org/SharedMailboxes/Public #namespace { # type = public # separator = / # prefix = Public/ # # # CONTROL=: Mark this public folder as read-only mailbox # # INDEX=: Per-user \Seen flag # location = maildir:/var/vmail/public/:CONTROL=~/Maildir/public:INDEX=~/Maildir/public # # # Allow users to subscribe to the public folders. # subscriptions = yes #} [root@mail tmp]#
On Sun, Apr 19, 2015 at 12:49 AM, Christian Kivalo <ml+dovecot@valo.at> wrote:
On 2015-04-18 19:23, Kevin Laurie wrote:
Hello,
Hello,
I have been trying to get full-text-search on dovecot. I followed the tutorial on this site:-
https://extremeshok.com/6622/enabling-apache-solr-4-10-using-jetty-with-dove...
The instruction on the page here seems wrong:- sed -i -e 's|mail_plugins = quota|mail_plugins = quotann# Enable fts fts_solr plugin globally for Solr Full Text Search Indexingnmail_plugins = $mail_plugins fts fts_solrnnplugin {nfts = solrn#break-imap-search will use solr for indexing TEXT and BODY searches.nfts_solr = break-imap-search url=http://127.0.0.1:8983/solr/nfts_autoindex = yesn}|' /etc/dovecot.conf
it seems the \ is missing in front of some "n"s therefore your missing some newlines...
I would appreciate if someone could help correct the parameters for the dovecot.conf output shown below. Please help.
[root@mail tmp]# cat /etc/dovecot/dovecot.conf
# Listen addresses. # - '*' means all available IPv4 addresses. # - '[::]' means all available IPv6 addresses. # Listen on all available addresses by default listen = * [::]
#base_dir = /var/run/dovecot mail_plugins = quotann# Enable fts fts_solr plugin globally for Solr Full Text Search Indexingnmail_plugins = $mail_plugins fts fts_solrnnplugin {nfts = solrn#break-imap-search will use solr for indexing TEXT and BODY searches.nfts_solr = break-imap-search url=http://127.0.0.1:8983/solr/nfts_autoindex = yesn} acl
the above should read with proper newlines: #base_dir = /var/run/dovecot mail_plugins = quota
# Enable fts fts_solr plugin globally for Solr Full Text Search Indexing mail_plugins = $mail_plugins fts fts_solr
plugin { fts = solr #break-imap-search will use solr for indexing TEXT and BODY searches. fts_solr = break-imap-search url=http://127.0.0.1:8983/solr/ fts_autoindex = yes } acl
protocol lmtp { # Log file info_log_path = /var/log/dovecot-lmtp.log
# Plugins mail_plugins = quotann# Enable fts fts_solr plugin globally forSolr Full Text Search Indexingnmail_plugins = $mail_plugins fts fts_solrnnplugin {nfts = solrn#break-imap-search will use solr for indexing TEXT and BODY searches.nfts_solr = break-imap-search url=http://127.0.0.1:8983/solr/nfts_autoindex = yesn} sieve postmaster_address = postmaster
lmtp_save_to_detail_mailbox = yes recipient_delimiter = +and again correct the above part of your config
# Plugins mail_plugins = quota
# Enable fts fts_solr plugin globally for Solr Full Text Search Indexing mail_plugins = $mail_plugins fts fts_solr
plugin { fts = solr #break-imap-search will use solr for indexing TEXT and BODY searches. fts_solr = break-imap-search url=http://127.0.0.1:8983/solr/ fts_autoindex = yes } sieve postmaster_address = postmaster
my config looks as above and its working fine.
hth -c