The rules must be consecutive,
if your global config has
quota_rule1 quota_rule2
then the userdb must return
quota_rule3. Or it will overwrite an existing rule.
Aki
On 06/10/2021 13:07 Stephane Magnier steph.mag220@netcourrier.com wrote:
Hi,
OK, I wrote this :
userdb { driver = passwd args = /etc/dovecot/quota-overrides
result_success=continue-ok
# Override fields from passwd #override_fields = home=/home/virtual/%u }
but sorry I don't understand the following line
username::::::::::quota_ruleX=... where X is the next rule number.
What should I write ?...... for instance : azt000:quota_rule1=+160GB ? something like that ??
Le 06/10/2021 à 10:13, Aki Tuomi a écrit :
That
*
there is actually mailbox mask. You have to return an additional quota_ruleN from your userdb for that user.You can do e.g.
userdb { .. result_success=continue-ok} }
userdb { driver = passwd args = /etc/dovecot/quota-overrides }
and put in there
username::::::::::quota_ruleX=... where X is the next rule number.
the count of : might be wrong.
Aki
On 06/10/2021 10:43 Stephane Magnier steph.mag220@netcourrier.com wrote:
Hi Again,
Juste another one...
The quota I've decided is 30Gb for everybody I would like to add an exception for the user AZT000 so here is my test :
I put 60 GB for AZT000, but apparently, this is not seen :-( No error message Is there a general syntax for a specific user ?
NB: I tried : quota_rule = azt000:storage=+60GB orquota_rule1 = azt000:storage=+60GB same results
plugin { quota = maildir:User quota quota_rule = *:storage=30GB quota_rule2 = Trash:storage=+100MB quota_rule3 = Spam:storage=+20%% # quota_rule = *:storage=70GB # quota_rule = *:storage=70GB quota_rule = azt000:storage=+60GB
Le 06/10/2021 à 08:09, Stephane Magnier a écrit :
Great !! works fine..
I had in fact, twice the same déclaration of quotat and storage on the same file..... one of them was with an upper case "S" for Storage..
Thanks again
Le 06/10/2021 à 07:50, Aki Tuomi a écrit :
On 06/10/2021 08:38 Stephane Magnier steph.mag220@netcourrier.com wrote:
Le 06/10/2021 à 06:51, Aki Tuomi a écrit :
> > On 06/10/2021 07:30 Stephane Magnier steph.mag220@netcourrier.com wrote: > > > > > > > >
> > > > Le 06/10/2021 à 06:10, Stephane Magnier a écrit : > > > > > > > > > > > Hi, > > > I am just running Dovecot v 2.3.8 .. seems to work fine. > > > I just add the quota plugin.. and.. I cannot see any differences.. I cannot see any information on Quota per user.. No specific info on Log file :-( > > >
> > > Any help please ? > > >
> > > Tahnks for your help > > >
> > > Here is my config : > > >
> > > > > > # 2.3.8 (9df20d2db): /etc/dovecot/dovecot.conf > > > # Pigeonhole version 0.5.8 (b7b03ba2) > > > # OS: Linux 4.18.0-305.12.1.el8_4.x86_64 x86_64 CentOS Linux release 8.4.2105 nfs4 > > > # Hostname: mbox1.intranet.office.itx > > > auth_cache_negative_ttl = 5 mins > > > auth_cache_ttl = 5 mins > > > auth_mechanisms = plain login > > > auth_username_format = %u > > > debug_log_path = /var/log/dovecot-debug.log > > > default_vsz_limit = 4 G > > > info_log_path = /var/log/dovecot-info.log > > > listen = * [::] > > > log_path = /var/log/dovecot.log > > > login_trusted_networks = 172.18.0.0/16 127.0.0.1 ::1 > > > mail_access_groups = dovecot > > > mail_fsync = always > > > mail_location = maildir:/var/spool2/mail/%u:LAYOUT=fs > > > mail_nfs_storage = yes > > > mail_plugins = " quota" > > > mail_privileged_group = mail > > > managesieve_notify_capability = mailto > > > managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave > > > mbox_very_dirty_syncs = yes > > > mbox_write_locks = fcntl > > > mmap_disable = yes > > > namespace inbox { > > > disabled = no > > > ignore_on_failure = no > > > inbox = yes > > > list = yes > > > location = > > > mailbox Archive { > > > auto = no > > > comment = " All my Accepted/NON SPAM" > > > special_use = \Archive > > > } > > > mailbox Drafts { > > > auto = subscribe > > > special_use = \Drafts > > > } > > > mailbox Junk { > > > auto = subscribe > > > autoexpunge = 90 days > > > special_use = \Junk > > > } > > > mailbox Sent { > > > auto = subscribe > > > special_use = \Sent > > > } > > > mailbox Trash { > > > auto = no > > > autoexpunge = 60 days > > > special_use = \Trash > > > } > > > mailbox virtual/All { > > > auto = no > > > special_use = \All > > > } > > > prefix = > > > subscriptions = yes > > > type = private > > > } > > > passdb { > > > driver = pam > > > } > > > plugin { > > > quota_grace = 10%% > > > quota_max_mail_size = 100M > > > quota_rule = *:storage=10000M > > > quota_rule2 = Trash:Storage=+100M > > > quota_rule3 = Spam:storage=+20%% > > > quota_status_nouser = DUNNO > > > quota_status_overquota = 552 5.2.2 Mailbox is full > > > quota_status_success = DUNNO > > > quota_warning = storage=95%% quota-warning 95 %u > > > quota_warning2 = storage=80%% quota-warning 80 %u > > > quota_warning3 = -storage=100%% quota-warning below %u > > > sieve = file:~/sieve;active=~/.dovecot.sieve > > > } > > > pop3_uidl_format = %v-%u > > > service auth { > > > unix_listener auth-master { > > > mode = 0666 > > > } > > > unix_listener auth-userdb { > > > mode = 0600 > > > user = mail > > > } > > > } > > > service dict { > > > unix_listener dict { > > > mode = 0600 > > > user = mail > > > } > > > } > > > service imap-login { > > > inet_listener imap { > > > port = 143 > > > } > > > inet_listener imaps { > > > port = 993 > > > ssl = yes > > > } > > > process_min_avail = 4 > > > service_count = 0 > > > } > > > service lmtp { > > > inet_listener lmtp { > > > port = 24 > > > } > > > unix_listener /var/run/lmtp { > > > group = mail > > > mode = 0660 > > > user = mail > > > } > > > } > > > service pop3-login { > > > inet_listener pop3 { > > > address = * > > > port = 110 > > > } > > > inet_listener pop3s { > > > port = 995 > > > ssl = yes > > > } > > > } > > > service quota-warning { > > > executable = script /usr/local/bin/quota-warning.sh > > > unix_listener quota-warning { > > > user = mail > > > } > > > user = dovecot > > > } > > > service submission { > > > process_limit = 250 > > > } > > > ssl = required > > > ssl_ca = > > ssl_cert = > > ssl_cipher_list = HIGH:!aNULL:!ADH:!DH:!RC4:!MD5:!RSA > > > ssl_dh = # hidden, use -P to show it > > > ssl_key = # hidden, use -P to show it > > > userdb { > > > driver = passwd > > > } > > > verbose_proctitle = yes > > > protocol lmtp { > > > mail_fsync = optimized > > > mail_plugins = autocreate quota acl fts fts_solr zlib mail_log notify sieve > > > postmaster_address = it@intranet.office.itx > > > } > > > protocol lda { > > > mail_fsync = optimized > > > mail_plugins = " quota sieve quota" > > > } > > > protocol imap { > > > mail_max_userip_connections = 80 > > > mail_plugins = " quota quota imap_quota" > > > ssl_cert = > > ssl_key = # hidden, use -P to show it > > > } > > > protocol pop3 { > > > mail_max_userip_connections = 10 > > > mail_plugins = " quota" > > > } > > > protocol submission { > > > mail_max_userip_connections = 10 > > > mail_plugins = " quota" > > > } > > > > > > > > > > > > > > > > > Just for info > >
> > [root@mbox1 xenia]# doveadm quota get -A |grep "STORAGE" > > Nothing at all ?? weird > > [root@mbox1 xenia]# > >
> > [root@mbox1 xenia]# doveadm quota get -u <user1> > > Quota name Type Value Limit % > > [root@mbox1 xenia]# > > => Absolutely nothing is displayed ???? > >
> >
> > normally, the size of the user1 email folder is about 21 Gb > > So..just modified the line :quota_rule = *:storage=100G > > But nothing has changed... > > > > > > > > > > > You are missing quota driver settings, the recommended settings are > > plugin { > quota = count > quota_vsizes = yes > } > > Aki > > > Hi Aki, Thanks for your reply..I just tryed to ad it.. but this can't connect anymore . Here is my exact declaration "90-quota.conf"
( based on : https://doc.dovecot.org/configuration_manual/quota/ )
> plugin { > quota = count > quota_vsizes = yes > #quota = maildir:User quota > quota_rule = *:storage=100GB > # quota_rule2 = Trash:storage=+100MB > # quota_rule3 = Spam:storage=+20%% > # 20% of 100GB = 20GB > quota_status_success = DUNNO > quota_status_nouser = DUNNO > quota_status_overquota = "552 5.2.2 Mailbox is full" > quota_warning = storage=95%% quota-warning 95 %u > quota_warning2 = storage=80%% quota-warning 80 %u > quota_warning3 = -storage=100%% quota-warning below %u >
> # LDA/LMTP allows saving the last mail to bring user from under quota to > # over quota, if the quota doesn't grow too high. Default is to allow as > # long as quota will stay under 10% above the limit. Also allowed e.g. 10M. > quota_grace = 10%% >
> # Quota plugin can also limit the maximum accepted mail size. > quota_max_mail_size = 100M > } > > >The error message I have now is :
Oct 06 07:23:35 imap(azt000)<7381><3pAIWajNgdcgAUHQ/kJ8Aikr1PIAQmFL>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage Oct 06 07:23:35 imap(azt000)<7382>
: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage Oct 06 07:26:02 master: Warning: Killed with signal 15 (by pid=8420 uid=0 code=kill) Oct 06 07:26:10 imap(azt000)<8468><cDRLYqjNcsSsEgA3>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage Oct 06 07:26:13 imap(azt000)<8469><mxN6YqjNdMSsEgA3>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage Then you can see that I've removed the 2 lines # quota_rule2 = Trash:storage=+100MB # quota_rule3 = Spam:storage=+20%%
but without any success
Effectively.. what is the Word "Storage" for Dovecot ?? no idea ... I just wrote what I saw :-)
For info : all the mailbox are placed on a NFS storage.. Don't know if this help to locate the problem.. Thanks and regards,
Did you try changing Storage => storage in your rule? It seems to be coming either from userdb or your config.
Try
doveadm user azt000
to if your userdb is providing these rules.Aki