Hi Aki,
I am not 100% sure. I do not really know what my OS does. "ps -A" says dovecot is running, but if I say "sudo service dovecot stop", my email client works fine still (that is, assuming the old version of dovecot is installed). ie the on-demand instances of dovecot-imapd that Alpine calls are, I assume, started and stopped by Alpine. (?)
Is my OS using dovecot for other stuff, like managing system mail (e.g. root's reports of cron jobs, which still go to /var/mail, but I never read them)? I am not certain. But I believed that any other use of dovecot would be using a different .conf file, so I was hoping I just had to know how to make my custom one (-c flag) work.
Thanks, Chris
On Mon, 31 Dec 2018, Aki Tuomi wrote:
Am I assuming correctly that you are not, in fact, running anything but imap process from Dovecot?
Aki
On 31 December 2018 at 18:35 Chris BL cpblpublic+dovecot@gmail.com wrote:
Hi Aki,
Oops; I did not think carefully enough about your instructions. Here is the output from
$ dovecot -n -c /home/meuser/dotfiles/auto-stanford-dovecot.conf
# 2.3.2.1 (0719df592): /home/meuser/dotfiles/auto-stanford-dovecot.conf # Pigeonhole version 0.5.2 () # OS: Linux 4.18.0-13-generic x86_64 Ubuntu 18.10 ext4 # Hostname: cpbl-t450s doveconf: Warning: please set ssl_dh= /etc/dovecot/dh.pem mail_location = maildir:/home/meuser/imap/gmailStanford:LAYOUT=fs:INBOX=/home/meuser/imap/gmailStanford/INBOX service stats { unix_listener stats-writer { mode = 0666 } } ssl_dh = # hidden, use -P to show it verbose_proctitle = yes
I then followed the instructions in the Warning lines above and now I get:
dovecot -n -c /home/meuser/dotfiles/auto-stanford-dovecot.conf # 2.3.2.1 (0719df592): /home/meuser/dotfiles/auto-stanford-dovecot.conf # Pigeonhole version 0.5.2 () # OS: Linux 4.18.0-13-generic x86_64 Ubuntu 18.10 ext4 # Hostname: cpbl-t450s mail_location = maildir:/home/meuser/imap/gmailStanford:LAYOUT=fs:INBOX=/home/meuser/imap/gmailStanford/INBOX service stats { unix_listener stats-writer { mode = 0666 } } ssl_dh = # hidden, use -P to show it verbose_proctitle = yes
However, this does not help my primary symptom:
$ /usr/lib/dovecot/imap -c /home/meuser/dotfiles/auto-stanford-dovecot.conf imap(meuser,)Error: net_connect_unix(/var/run/dovecot/stats-writer) failed: Permission denied
- PREAUTH [CAPABILITY IMAP4rev1 SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS BINARY MOVE SNIPPET=FUZZY LITERAL+ NOTIFY] Logged in as meuser
Thanks! Chris
On Mon, Dec 31, 2018 at 10:27 AM Aki Tuomi aki.tuomi@open-xchange.com wrote: Did you remove the service section before taking doveconf -n? 'cos I can't see it here..
Also, did you restart dovecot after config change? Aki > On 31 December 2018 at 16:54 Chris BL <cpblpublic+dovecot@gmail.com> wrote: > > > Hi Aki, > > Yes, the same connect error: imap(meuser,)Error: net_connect_unix(/var/run/dovecot/stats-writer) failed: Permission denied > > The mail location in "doveconf -n" (belo) does not reflect my preferences. > > In Alpine, if I acknowledge the error I get, which tells me to add > novalidate-cert in my pinerc file, it prompts me for my POSIX username and > password. After that, I get my /var/spool/mail inbox, which is not what I > want. > > > doveconf -n > # 2.3.2.1 (0719df592): /etc/dovecot/dovecot.conf > # Pigeonhole version 0.5.2 () > # OS: Linux 4.18.0-13-generic x86_64 Ubuntu 18.10 > # Hostname: myhost-t450s > mail_location = mbox:~/mail:INBOX=/var/mail/%u > mail_privileged_group = mail > namespace inbox { > inbox = yes > location = > mailbox Drafts { > special_use = \Drafts > } > mailbox Junk { > special_use = \Junk > } > mailbox Sent { > special_use = \Sent > } > mailbox "Sent Messages" { > special_use = \Sent > } > mailbox Trash { > special_use = \Trash > } > prefix = > } > passdb { > driver = pam > } > protocols = " imap" > ssl_cert = </etc/dovecot/private/dovecot.pem > ssl_client_ca_dir = /etc/ssl/certs > ssl_dh = # hidden, use -P to show it > ssl_key = # hidden, use -P to show it > userdb { > driver = passwd > } > > > > On Mon, 31 Dec 2018, Aki Tuomi wrote: > > > You are still getting the connect error? > > > > Can you share your doveconf -n? > > > > Aki > > > > > On 31 December 2018 at 16:42 cpblpublic+dovecot@gmail.com wrote: > > > > > > > > > Hi Aki, > > > > > > Thanks. I put that in the .conf file I mentioned, and it made no > > > difference. > > > > > > Chris > > > > > > > Hi! > > > > > > > > In your case it's probably easiest to change > > > > > > > > service stats { > > > > unix_listener stats-writer { > > > > mode = 0666 > > > > } > > > > } > > > > > > > > Aki > > > > > > > > > On 31 December 2018 at 16:05 cpblpublic+dovecot@gmail.com wrote: > > > > > > > > > > > > > > > > > > > > I use a localhost dovecot imap server in order to access maildir folders from Alpine (see 2009 instructions for my set up here > > > > > https://cpbl.wordpress.com/2009/11/07/alpine-offlineimap-and-gmail-under-ubuntu/ ) > > > > > > > > > > My configuration has worked nicely since 2009, but failed after a recent upgrade of dovecot (during basic upgrade from Ubuntu 18.04 to 18.10). > > > > > > > > > > The version of Alpine did not change. Uninstalling dovecot-core and dovecot-imapd, and reinstalling the older versions, fully fixes the problem. > > > > > > > > > > I would like to know how to get my configuration working with the new version of dovecot. > > > > > > > > > > Here's what the problem looks like: > > > > > > > > > > I have a file auto-dovecot.conf with only the following two lines. > > > > > > > > > > verbose_proctitle = yes > > > > > mail_location = maildir:/home/meuser/imap/gmailStanford:LAYOUT=fs:INBOX=/home/meuser/imap/gmailStanford/INBOX > > > > > > > > > > Other /etc/ files are unchanged from installation defaults. > > > > > > > > > > Alpine calls imapd when it starts, with the following command: > > > > > > > > > > /usr/lib/dovecot/imap -c /home/meuser/dotfiles/auto-dovecot.conf > > > > > > > > > > > > > > > When I run that command, I get: > > > > > > > > > > imap(meuser,)Error: net_connect_unix(/var/run/dovecot/stats-writer) failed: Permission denied > > > > > * PREAUTH [CAPABILITY IMAP4rev1 SASL-IR LOGIN-REFERRALS ID ENABLE IDLE > > > > > SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT > > > > > MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS > > > > > LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN > > > > > CONTEXT=SEARCH LIST-STATUS BINARY MOVE SNIPPET=FUZZY LITERAL+ NOTIFY] > > > > > Logged in as meuser > > > > > > > > > > > > > > > > > > > > > > > > > so I am guessing that the first line is the issue, since when the older version I get instead: > > > > > > > > > > * PREAUTH [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE > > > > > IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT > > > > > MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS > > > > > LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN > > > > > CONTEXT=SEARCH LIST-STATUS BINARY MOVE] Logged in as meuser > > > > > > > > > > > > > > > Can anyone help me? I cannot find documentation for using a localhost server for Alpine, except my own from 2009. > > > > > > > > > > Many thanks! > > > > > > > > > > Chris > > > > > >