On 06/10/2021 15:36 Stephane Magnier <steph.mag220@netcourrier.com> wrote:
OK, but is the syntax correct ?
Should it be :azt000:quota_rule4=+160GB ?
Is that correct ?
Because I've made the test.. It didn't "shoot at me" while restarting the service, it apparently accept the syntax, but the result is still wrong..
It is still considering a limit of 30gb and not 160Gb
( the line : quota_rule = *:storage=30GB )
To sum up , I have
plugin {
quota = maildir:User quota
quota_rule = *:storage=30GB
quota_rule2 = Trash:storage=+100MB
quota_rule3 = Spam:storage=+20%%
azt000:quota_rule4=+160GB
quota_status_success = DUNNO
quota_status_nouser = DUNNO
quota_status_overquota = "552 5.2.2 Mailbox is full"
quota_warning = storage=95%% quota-warning 95 %u
quota_warning2 = storage=80%% quota-warning 80 %u
quota_warning3 = storage=100%% quota-warning below %u
quota_grace = 10%%
# Quota plugin can also limit the maximum accepted mail size.
quota_max_mail_size = 100M
}
and
userdb {
driver = passwd
args = /etc/dovecot/quota-overrides
result_success=continue-ok
}
but
[root@mbox1 conf.d]# service dovecot restart
Redirecting to /bin/systemctl restart dovecot.service
[root@mbox1 conf.d]# doveadm quota get -u azt000
Quota name Type Value Limit %
User quota STORAGE 22268406 31457280 70
User quota MESSAGE 29853 - 0
[root@mbox1 conf.d]#
With 70% ; it's considering the 30Gb and not the 160Gb ( the AZT000 folder size is about 21Gb )
Le 06/10/2021 à 14:08, Aki Tuomi a écrit :
The rules must be consecutive,
if your global config has
quota_rule1
quota_rule2
then the userdb must return
quota_rule3. Or it will overwrite an existing rule.
Aki
On 06/10/2021 13:07 Stephane Magnier <steph.mag220@netcourrier.com> wrote:
Hi,
OK, I wrote this :
userdb {
driver = passwd
args = /etc/dovecot/quota-overrides
result_success=continue-ok
# Override fields from passwd
#override_fields = home=/home/virtual/%u
}
but sorry I don't understand the following line
username::::::::::quota_ruleX=... where X is the next rule number.
What should I write ?...... for instance : ? something like that ??
Le 06/10/2021 à 10:13, Aki Tuomi a écrit :
That `*` there is actually mailbox mask. You have to return an additional quota_ruleN from your userdb for that user.
You can do e.g.
userdb {
..
result_success=continue-ok}
}
userdb {
driver = passwd
args = /etc/dovecot/quota-overrides
}
and put in there
username::::::::::quota_ruleX=... where X is the next rule number.
the count of : might be wrong.
Aki
On 06/10/2021 10:43 Stephane Magnier <steph.mag220@netcourrier.com> wrote:
Hi Again,
Juste another one...
The quota I've decided is 30Gb for everybody
I would like to add an exception for the user AZT000 so here is my test :
I put 60 GB for AZT000, but apparently, this is not seen :-( No error message
Is there a general syntax for a specific user ?
NB: I tried :
quota_rule = azt000:storage=+60GB orquota_rule1 = azt000:storage=+60GB same results
plugin {
quota = maildir:User quota
quota_rule = *:storage=30GB
quota_rule2 = Trash:storage=+100MB
quota_rule3 = Spam:storage=+20%%
# quota_rule = *:storage=70GB
# quota_rule = *:storage=70GB
quota_rule = azt000:storage=+60GB
Le 06/10/2021 à 08:09, Stephane Magnier a écrit :
Great !! works fine..
I had in fact, twice the same déclaration of quotat and storage on the same file..... one of them was with an upper case "S" for Storage..
Thanks again
Le 06/10/2021 à 07:50, Aki Tuomi a écrit :
On 06/10/2021 08:38 Stephane Magnier <steph.mag220@netcourrier.com> wrote:
Le 06/10/2021 à 06:51, Aki Tuomi a écrit :
On 06/10/2021 07:30 Stephane Magnier <steph.mag220@netcourrier.com> wrote:
Le 06/10/2021 à 06:10, Stephane Magnier a écrit :
Hi,
I am just running Dovecot v 2.3.8 .. seems to work fine.
I just add the quota plugin.. and.. I cannot see any differences.. I cannot see any information on Quota per user.. No specific info on Log file :-(
Any help please ?
Tahnks for your help
Here is my config :
# 2.3.8 (9df20d2db): /etc/dovecot/dovecot.conf
# Pigeonhole version 0.5.8 (b7b03ba2)
# OS: Linux 4.18.0-305.12.1.el8_4.x86_64 x86_64 CentOS Linux release 8.4.2105 nfs4
# Hostname: mbox1.intranet.office.itx
auth_cache_negative_ttl = 5 mins
auth_cache_ttl = 5 mins
auth_mechanisms = plain login
auth_username_format = %u
debug_log_path = /var/log/dovecot-debug.log
default_vsz_limit = 4 G
info_log_path = /var/log/dovecot-info.log
listen = * [::]
log_path = /var/log/dovecot.log
login_trusted_networks = 172.18.0.0/16 127.0.0.1 ::1
mail_access_groups = dovecot
mail_fsync = always
mail_location = maildir:/var/spool2/mail/%u:LAYOUT=fs
mail_nfs_storage = yes
mail_plugins = " quota"
mail_privileged_group = mail
managesieve_notify_capability = mailto
managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave
mbox_very_dirty_syncs = yes
mbox_write_locks = fcntl
mmap_disable = yes
namespace inbox {
disabled = no
ignore_on_failure = no
inbox = yes
list = yes
location =
mailbox Archive {
auto = no
comment = " All my Accepted/NON SPAM"
special_use = \Archive
}
mailbox Drafts {
auto = subscribe
special_use = \Drafts
}
mailbox Junk {
auto = subscribe
autoexpunge = 90 days
special_use = \Junk
}
mailbox Sent {
auto = subscribe
special_use = \Sent
}
mailbox Trash {
auto = no
autoexpunge = 60 days
special_use = \Trash
}
mailbox virtual/All {
auto = no
special_use = \All
}
prefix =
subscriptions = yes
type = private
}
passdb {
driver = pam
}
plugin {
quota_grace = 10%%
quota_max_mail_size = 100M
quota_rule = *:storage=10000M
quota_rule2 = Trash:Storage=+100M
quota_rule3 = Spam:storage=+20%%
quota_status_nouser = DUNNO
quota_status_overquota = 552 5.2.2 Mailbox is full
quota_status_success = DUNNO
quota_warning = storage=95%% quota-warning 95 %u
quota_warning2 = storage=80%% quota-warning 80 %u
quota_warning3 = -storage=100%% quota-warning below %u
sieve = file:~/sieve;active=~/.dovecot.sieve
}
pop3_uidl_format = %v-%u
service auth {
unix_listener auth-master {
mode = 0666
}
unix_listener auth-userdb {
mode = 0600
user = mail
}
}
service dict {
unix_listener dict {
mode = 0600
user = mail
}
}
service imap-login {
inet_listener imap {
port = 143
}
inet_listener imaps {
port = 993
ssl = yes
}
process_min_avail = 4
service_count = 0
}
service lmtp {
inet_listener lmtp {
port = 24
}
unix_listener /var/run/lmtp {
group = mail
mode = 0660
user = mail
}
}
service pop3-login {
inet_listener pop3 {
address = *
port = 110
}
inet_listener pop3s {
port = 995
ssl = yes
}
}
service quota-warning {
executable = script /usr/local/bin/quota-warning.sh
unix_listener quota-warning {
user = mail
}
user = dovecot
}
service submission {
process_limit = 250
}
ssl = required
ssl_ca = </etc/mail/ssl/ssl1/xxxxxp_net.ca-bundle
ssl_cert = </etc/mail/ssl/ssl1/xxxxxx_net.crt
ssl_cipher_list = HIGH:!aNULL:!ADH:!DH:!RC4:!MD5:!RSA
ssl_dh = # hidden, use -P to show it
ssl_key = # hidden, use -P to show it
userdb {
driver = passwd
}
verbose_proctitle = yes
protocol lmtp {
mail_fsync = optimized
mail_plugins = autocreate quota acl fts fts_solr zlib mail_log notify sieve
postmaster_address = it@intranet.office.itx
}
protocol lda {
mail_fsync = optimized
mail_plugins = " quota sieve quota"
}
protocol imap {
mail_max_userip_connections = 80
mail_plugins = " quota quota imap_quota"
ssl_cert = </etc/mail/ssl/ssl1/STAR_aztgrp_net.crt
ssl_key = # hidden, use -P to show it
}
protocol pop3 {
mail_max_userip_connections = 10
mail_plugins = " quota"
}
protocol submission {
mail_max_userip_connections = 10
mail_plugins = " quota"
}
Just for info
[root@mbox1 xenia]# doveadm quota get -A |grep "STORAGE"
Nothing at all ?? weird
[root@mbox1 xenia]#
[root@mbox1 xenia]# doveadm quota get -u <user1>
Quota name Type Value Limit %
[root@mbox1 xenia]#
=> Absolutely nothing is displayed ????
normally, the size of the user1 email folder is about 21 Gb
So..just modified the line :quota_rule = *:storage=100G
But nothing has changed...
You are missing quota driver settings, the recommended settings are
plugin {
quota = count
quota_vsizes = yes
}
Aki
Hi Aki,
Thanks for your reply..
I just tryed to ad it.. but this can't connect anymore .
Here is my exact declaration "90-quota.conf"
( based on : https://doc.dovecot.org/configuration_manual/quota/ )
plugin {
quota = count
quota_vsizes = yes
#quota = maildir:User quota
quota_rule = *:storage=100GB
# quota_rule2 = Trash:storage=+100MB
# quota_rule3 = Spam:storage=+20%%
# 20% of 100GB = 20GB
quota_status_success = DUNNO
quota_status_nouser = DUNNO
quota_status_overquota = "552 5.2.2 Mailbox is full"
quota_warning = storage=95%% quota-warning 95 %u
quota_warning2 = storage=80%% quota-warning 80 %u
quota_warning3 = -storage=100%% quota-warning below %u
# LDA/LMTP allows saving the last mail to bring user from under quota to
# over quota, if the quota doesn't grow too high. Default is to allow as
# long as quota will stay under 10% above the limit. Also allowed e.g. 10M.
quota_grace = 10%%
# Quota plugin can also limit the maximum accepted mail size.
quota_max_mail_size = 100M
}
The error message I have now is :
Oct 06 07:23:35 imap(azt000)<7381><3pAIWajNgdcgAUHQ/kJ8Aikr1PIAQmFL>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage
Oct 06 07:23:35 imap(azt000)<7382><jqwJWajNgtcgAUHQ/kJ8Aikr1PIAQmFL>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage
Oct 06 07:26:02 master: Warning: Killed with signal 15 (by pid=8420 uid=0 code=kill)
Oct 06 07:26:10 imap(azt000)<8468><cDRLYqjNcsSsEgA3>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage
Oct 06 07:26:13 imap(azt000)<8469><mxN6YqjNdMSsEgA3>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage
Then you can see that I've removed the 2 lines
# quota_rule2 = Trash:storage=+100MB
# quota_rule3 = Spam:storage=+20%%
but without any success
Effectively.. what is the Word "Storage" for Dovecot ?? no idea ... I just wrote what I saw :-)
For info : all the mailbox are placed on a NFS storage.. Don't know if this help to locate the problem..
Thanks and regards,
Did you try changing Storage => storage in your rule? It seems to be coming either from userdb or your config.
Try `doveadm user azt000` to if your userdb is providing these rules.
Aki