auth process receives the protocol requested when performing authentication as variable %s (see https://wiki2.dovecot.org/Variables)

You can use this to choose the value you return for port.

Aki

> On 17 September 2018 at 16:56 Alexander Chekalin <alexander.chekalin@gmail.com> wrote:
>
>
> Seen that URL but port= is strange due to there is no protocol connection.
> So if I set port=12345 then what proto will I see there? Misleading setting
> this is why I mentioned (non-existing) per-proto port setting above.
>
> May I please ask for any example on how to pass port per proto? It is a bit
> fuzzy for me to figure it out but I do believe you used to use it somehow.
>
> On Mon, Sep 17, 2018 at 4:42 PM Aki Tuomi <aki.tuomi@dovecot.fi> wrote:
>
> > The port is determined with port=nnn setting. You can't return
> > per-protocol port like that, you need to look at the protocol requested by
> > user and return port based on that, or you can omit port to default into
> > "standard port".
> >
> > not using ssl/starttls is default.
> >
> > > On 17 September 2018 at 16:35 Alexander Chekalin <
> > alexander.chekalin@gmail.com> wrote:
> > >
> > >
> > > Thank you!
> > >
> > > Ok, so I can omit ssl=no and startssl=no, and this results in default
> > > settings for ssl which is 'off'? Or the defaults are 'on' anyway?
> > >
> > > Can I somehow specify ports on remote hosts that proxy will use to
> > connect
> > > to? Like (just image): 'proxy host_imap=10.1.1.1:143 host_pop=
> > 10.1.1.1:110'
> > > or somehow?
> > >
> > >
> > >
> > >
> > > On Mon, Sep 17, 2018 at 4:33 PM Aki Tuomi <aki.tuomi@dovecot.fi> wrote:
> > >
> > > > Due to certain design issues, the ssl=no is actually same as ssl=yes,
> > same
> > > > goes for starttls=no. So there is no support actually for "ssl=no" at
> > this
> > > > moment.
> > > >
> > > > Aki
> > > >
> > > > > On 17 September 2018 at 15:32 Alexander Chekalin <
> > > > alexander.chekalin@gmail.com> wrote:
> > > > >
> > > > >
> > > > > Surely.
> > > > >
> > > > > Here it is:
> > > > >
> > > > > # doveadm auth user@domain.com
> > > > > Password:
> > > > > passdb: chekalin_krg@ascon.ru auth succeeded
> > > > > extra fields:
> > > > >   user=user@domain.com
> > > > >   proxy
> > > > >   host=10.10.14.131
> > > > >   ssl=no
> > > > >   startssl=no
> > > > >   source_ip=10.10.14.2
> > > > >   proxy
> > > > >   proxy
> > > > >   pass=password
> > > > >
> > > > > Two "proxy" are from two "proxy" and "proxy=yes" settings passed from
> > > > > passdb.
> > > > >
> > > > > On Mon, Sep 17, 2018 at 3:03 PM Aki Tuomi <aki.tuomi@dovecot.fi>
> > wrote:
> > > > >
> > > > > > Can you provide output of
> > > > > >
> > > > > > doveadm auth test some-user
> > > > > > Aki
> > > > > >
> > > > > > On 17.09.2018 14:58, Alexander Chekalin wrote:
> > > > > >
> > > > > > Dear Aki,
> > > > > >
> > > > > > we keep our users in LDAP so I when I even return 'proxy
> > > > host=backend_ip
> > > > > > tls=no' it won't use non-TLS connection. The same is when I remove
> > > > 'tls=no'
> > > > > > part. May there be any extra things I need to pass when I use LDAP?
> > > > > >
> > > > > > On Mon, Sep 17, 2018 at 2:07 PM Aki Tuomi <aki.tuomi@dovecot.fi>
> > > > wrote:
> > > > > >
> > > > > >>
> > > > > >>
> > > > > >> On 17.09.2018 13:59, Alexander Chekalin wrote:
> > > > > >> > Hi,
> > > > > >> >
> > > > > >> > I try to set up dovecot as a proxy server, to proxy requests to
> > > > > >> > several dovecot-based backend servers. I wand external clients
> > who
> > > > > >> > connects to this proxy Dovecot to use TLS (this is easy to set
> > up)
> > > > > >> > while want to have unsecured (plain IMAP/POP) connections to
> > > > backends.
> > > > > >> >
> > > > > >> > You see, links to backends are over LAN so no TLS needed, and
> > these
> > > > > >> > backends are poor old machines (with old Docecots like 2.0.6)
> > this
> > > > is
> > > > > >> > why I don't want to use TLS to acces backends.
> > > > > >> >
> > > > > >> > But as I did the test setup I can see proxy Dovecot uses TLS to
> > > > > >> > connect to backends. Is there any way I can specify this aspect
> > of
> > > > > >> > Dovecot proxy?
> > > > > >> >
> > > > > >> > Please advice!
> > > > > >> >
> > > > > >> > Yours,
> > > > > >> >   Alexander
> > > > > >>
> > > > > >> Dovecot does not use TLS/SSL when connecting to a backend server
> > by
> > > > > >> default, you are probably specifying this in your proxy config or
> > > > > >> password database.
> > > > > >>
> > > > > >> Aki
> > > > > >>
> > > > > >
> > > > > >
> > > >
> >