[Dovecot] CentOS 5 ... again
At this point I don't think I can do anymore damage to my mail server but I'd like to know if anyone else is using the pre-built RPM files from ATrpms before I install them?
http://dl.atrpms.net/all/dovecot-1.1.11-0_90.el5.i386.rpm http://dl.atrpms.net/all/dovecot-sieve-1.1.6-9.el5.i386.rpm
Or is there a dovecot-sieve for 1.0.7 from the rpmforge repo? I haven't found it yet but could have sworn I had it before.
Thanks, Rod
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi Roderick,
On 2009-02-07 05:48, Roderick A. Anderson wrote: | At this point I don't think I can do anymore damage to my mail server | but I'd like to know if anyone else is using the pre-built RPM files | from ATrpms before I install them? | | http://dl.atrpms.net/all/dovecot-1.1.11-0_90.el5.i386.rpm | http://dl.atrpms.net/all/dovecot-sieve-1.1.6-9.el5.i386.rpm
We're using those RPMs (currently version 1.1.7). They always worked very well for us.
Patrick.
STAR Software (Shanghai) Co., Ltd. http://www.star-group.net/ Phone: +86 (21) 3462 7688 x 826 Fax: +86 (21) 3462 7779
PGP key: E883A005 https://stshacom1.star-china.net/keys/patrick_nagel.asc Fingerprint: E09A D65E 855F B334 E5C3 5386 EF23 20FC E883 A005 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iEYEARECAAYFAkmPkV0ACgkQ7yMg/OiDoAXrBwCfSXO+0qGC2Pq9I0Nj1zyQ98vV 6NMAoLLxqojYfUy1OmS9HnyIM2GS+qrr =EDSr -----END PGP SIGNATURE-----
Patrick Nagel wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi Roderick,
On 2009-02-07 05:48, Roderick A. Anderson wrote: | At this point I don't think I can do anymore damage to my mail server | but I'd like to know if anyone else is using the pre-built RPM files | from ATrpms before I install them? | | http://dl.atrpms.net/all/dovecot-1.1.11-0_90.el5.i386.rpm | http://dl.atrpms.net/all/dovecot-sieve-1.1.6-9.el5.i386.rpm
We're using those RPMs (currently version 1.1.7). They always worked very well for us.
Thanks Patrick. I went ahead and upgraded to them on both the test and live server. All seems to be going well other than a Dovecot index rebuild of messages I moved from a crashed server. And that probably doesn't have anything to do with the versions. ;-)
Rod
Patrick.
STAR Software (Shanghai) Co., Ltd. http://www.star-group.net/ Phone: +86 (21) 3462 7688 x 826 Fax: +86 (21) 3462 7779
PGP key: E883A005 https://stshacom1.star-china.net/keys/patrick_nagel.asc Fingerprint: E09A D65E 855F B334 E5C3 5386 EF23 20FC E883 A005 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iEYEARECAAYFAkmPkV0ACgkQ7yMg/OiDoAXrBwCfSXO+0qGC2Pq9I0Nj1zyQ98vV 6NMAoLLxqojYfUy1OmS9HnyIM2GS+qrr =EDSr -----END PGP SIGNATURE-----
guys , i m new to centos. i have learned to use yum and the priority plugin. Does the atrpm repo provide the most uptodate version of dovecot? i have the following repos configured ->epel and rpm forge besides thestandard base,updates,addons,extras repos.
On 2009-02-07 05:48, Roderick A. Anderson wrote: | At this point I don't think I can do anymore damage to my mail server | but I'd like to know if anyone else is using the pre-built RPM files | from ATrpms before I install them? | | http://dl.atrpms.net/all/dovecot-1.1.11-0_90.el5.i386.rpm | http://dl.atrpms.net/all/dovecot-sieve-1.1.6-9.el5.i386.rpm
We're using those RPMs (currently version 1.1.7). They always worked very well for us.
Thanks Patrick. I went ahead and upgraded to them on both the test and live server. All seems to be going well other than a Dovecot index rebuild of messages I moved from a crashed server. And that probably doesn't have anything to do with the versions. ;-)
Rod
Patrick.
STAR Software (Shanghai) Co., Ltd. http://www.star-group.net/ Phone: +86 (21) 3462 7688 x 826 Fax: +86 (21) 3462 7779
PGP key: E883A005 https://stshacom1.star-china.net/keys/patrick_nagel.asc Fingerprint: E09A D65E 855F B334 E5C3 5386 EF23 20FC E883 A005 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iEYEARECAAYFAkmPkV0ACgkQ7yMg/OiDoAXrBwCfSXO+0qGC2Pq9I0Nj1zyQ98vV 6NMAoLLxqojYfUy1OmS9HnyIM2GS+qrr =EDSr -----END PGP SIGNATURE-----
Linux Advocate wrote:
guys , i m new to centos. i have learned to use yum and the priority plugin. Does the atrpm repo provide the most uptodate version of dovecot? i have the following repos configured ->epel and rpm forge besides thestandard base,updates,addons,extras repos.
The two location below are not, or at least don't seem to be, in the standard repository hierarchy. I used wget to pull them down to the system and used rpm to install them. So ... you won't be able to just "yum update" unless you add an entry in yum.repos.d for both of them.
It would be nice to see the latest or nearly latest available via a simple yum update.
Rod
On 2009-02-07 05:48, Roderick A. Anderson wrote: | At this point I don't think I can do anymore damage to my mail server | but I'd like to know if anyone else is using the pre-built RPM files | from ATrpms before I install them? | | http://dl.atrpms.net/all/dovecot-1.1.11-0_90.el5.i386.rpm | http://dl.atrpms.net/all/dovecot-sieve-1.1.6-9.el5.i386.rpm
We're using those RPMs (currently version 1.1.7). They always worked very well for us. Thanks Patrick. I went ahead and upgraded to them on both the test and live server. All seems to be going well other than a Dovecot index rebuild of messages I moved from a crashed server. And that probably doesn't have anything to do with the versions. ;-)
Rod --
Patrick.
- -- STAR Software (Shanghai) Co., Ltd. http://www.star-group.net/ Phone: +86 (21) 3462 7688 x 826 Fax: +86 (21) 3462 7779
PGP key: E883A005 https://stshacom1.star-china.net/keys/patrick_nagel.asc Fingerprint: E09A D65E 855F B334 E5C3 5386 EF23 20FC E883 A005 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iEYEARECAAYFAkmPkV0ACgkQ7yMg/OiDoAXrBwCfSXO+0qGC2Pq9I0Nj1zyQ98vV 6NMAoLLxqojYfUy1OmS9HnyIM2GS+qrr =EDSr -----END PGP SIGNATURE-----
guys , i m new to centos. i have learned to use yum and the priority plugin. Does the atrpm repo provide the most up to date version of dovecot? i have
on 2-9-2009 8:07 PM Linux Advocate spake the following: the following
repos configured ->epel and rpm forge besides thestandard base,updates,addons,extras repos.
Atrpms is the most up to date version I have found so far, and it looks like it is recently up to 1.1.11. They also have the 1.0 branch if you need it. I usually leave it disabled and only enable it with the "yum --enablerepo=atrpms update dovecot" command when I want to update dovecot. It seems a little too "cutting edge" for my tastes on a server. Others are OK with it being enabled, so YMMV.
-- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!!
Scott Silva wrote:
guys , i m new to centos. i have learned to use yum and the priority plugin. Does the atrpm repo provide the most up to date version of dovecot? i have
on 2-9-2009 8:07 PM Linux Advocate spake the following: the following
repos configured ->epel and rpm forge besides thestandard base,updates,addons,extras repos.
Atrpms is the most up to date version I have found so far, and it looks like it is recently up to 1.1.11. They also have the 1.0 branch if you need it. I usually leave it disabled and only enable it with the "yum --enablerepo=atrpms update dovecot" command when I want to update dovecot. It seems a little too "cutting edge" for my tastes on a server. Others are OK with it being enabled, so YMMV.
If you only want to pull dovecot from atrpms, add a includepkgs option to the repo definition[1] and leave it enabled. You'll see dovecot updates just like any other package without having to use the whole repo:
[atrpms] name=Red Hat Enterprise $releasever - $basearch - ATrpms baseurl=http://dl.atrpms.net/el$releasever-$basearch/atrpms/stable gpgcheck=1 gpgkey=http://ATrpms.net/RPM-GPG-KEY.atrpms enabled=1 includepkgs=dovecot*
[atrpms-testing] name=Red Hat Enterprise $releasever - $basearch - ATrpms-testing baseurl=http://dl.atrpms.net/el$releasever-$basearch/atrpms/testing gpgcheck=1 gpgkey=http://ATrpms.net/RPM-GPG-KEY.atrpms enabled=1 includepkgs=dovecot*
[1] http://atrpms.net/install.html
Angel Marin http://anmar.eu.org/
on 2-10-2009 9:02 AM Angel Marin spake the following:
Scott Silva wrote:
guys , i m new to centos. i have learned to use yum and the priority plugin. Does the atrpm repo provide the most up to date version of dovecot? i have
on 2-9-2009 8:07 PM Linux Advocate spake the following: the following
repos configured ->epel and rpm forge besides thestandard base,updates,addons,extras repos.
Atrpms is the most up to date version I have found so far, and it looks like it is recently up to 1.1.11. They also have the 1.0 branch if you need it. I usually leave it disabled and only enable it with the "yum --enablerepo=atrpms update dovecot" command when I want to update dovecot. It seems a little too "cutting edge" for my tastes on a server. Others are OK with it being enabled, so YMMV.
If you only want to pull dovecot from atrpms, add a includepkgs option to the repo definition[1] and leave it enabled. You'll see dovecot updates just like any other package without having to use the whole repo:
[atrpms] name=Red Hat Enterprise $releasever - $basearch - ATrpms baseurl=http://dl.atrpms.net/el$releasever-$basearch/atrpms/stable gpgcheck=1 gpgkey=http://ATrpms.net/RPM-GPG-KEY.atrpms enabled=1 includepkgs=dovecot*
[atrpms-testing] name=Red Hat Enterprise $releasever - $basearch - ATrpms-testing baseurl=http://dl.atrpms.net/el$releasever-$basearch/atrpms/testing gpgcheck=1 gpgkey=http://ATrpms.net/RPM-GPG-KEY.atrpms enabled=1 includepkgs=dovecot*
[1] http://atrpms.net/install.html Even cleaner. I like it. Thanks for this, it will make things easier if I get "hit by a bus"
-- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!!
Thanx guys ( Angel,Roderick, Scott). The tip below is really good.
----- Original Message ----
From: Angel Marin anmar@anmar.eu.org
If you only want to pull dovecot from atrpms, add a includepkgs option to the repo definition[1] and leave it enabled. You'll see dovecot updates just like any other package without having to use the whole repo:
[atrpms] name=Red Hat Enterprise $releasever - $basearch - ATrpms baseurl=http://dl.atrpms.net/el$releasever-$basearch/atrpms/stable gpgcheck=1 gpgkey=http://ATrpms.net/RPM-GPG-KEY.atrpms enabled=1 includepkgs=dovecot*
[atrpms-testing] name=Red Hat Enterprise $releasever - $basearch - ATrpms-testing baseurl=http://dl.atrpms.net/el$releasever-$basearch/atrpms/testing gpgcheck=1 gpgkey=http://ATrpms.net/RPM-GPG-KEY.atrpms enabled=1 includepkgs=dovecot*
[1] http://atrpms.net/install.html -- Angel Marin http://anmar.eu.org/
On Tue, 10 Feb 2009 18:02:23 +0100 Angel Marin anmar@anmar.eu.org wrote:
Scott Silva wrote:
guys , i m new to centos. i have learned to use yum and the priority plugin. Does the atrpm repo provide the most up to date version of dovecot? i have
on 2-9-2009 8:07 PM Linux Advocate spake the following: the following
repos configured ->epel and rpm forge besides thestandard base,updates,addons,extras repos.
Atrpms is the most up to date version I have found so far, and it looks like it is recently up to 1.1.11. They also have the 1.0 branch if you need it. I usually leave it disabled and only enable it with the "yum --enablerepo=atrpms update dovecot" command when I want to update dovecot. It seems a little too "cutting edge" for my tastes on a server. Others are OK with it being enabled, so YMMV.
If you only want to pull dovecot from atrpms, add a includepkgs option to the repo definition[1] and leave it enabled. You'll see dovecot updates just like any other package without having to use the whole repo:
[atrpms] name=Red Hat Enterprise $releasever - $basearch - ATrpms baseurl=http://dl.atrpms.net/el$releasever-$basearch/atrpms/stable gpgcheck=1 gpgkey=http://ATrpms.net/RPM-GPG-KEY.atrpms enabled=1 includepkgs=dovecot*
[atrpms-testing] name=Red Hat Enterprise $releasever - $basearch - ATrpms-testing baseurl=http://dl.atrpms.net/el$releasever-$basearch/atrpms/testing gpgcheck=1 gpgkey=http://ATrpms.net/RPM-GPG-KEY.atrpms enabled=1 includepkgs=dovecot*
Better use specific package names, speeds up 'yum check-update' (etc. pp.) quite a bit. And something like Nagios won't bite you, because there was some timeout due to the filtering.
-jhz
participants (6)
-
Angel Marin
-
Jan-Hendrik Zab
-
Linux Advocate
-
Patrick Nagel
-
Roderick A. Anderson
-
Scott Silva