-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512

Actually, from the OpenBSD 3.9 ports tree, the version is 1.0b3 and it crashes the same way...

I'm semi-willing to read the GCC man page, can you give me at least a small hint as to where to start looking?

Ed V.

7 June 2006 18:51:04

Chris Cappuccio wrote:

You have two choices, you can either

1. Use the port

or

2. Read the gcc manual page

B.O.F.H. [bofh@null-route.org] wrote: This is for all versions from 1.0b3 - 1.0b8

All crash at the same place:

Making all in auth gmake[3]: Entering directory /src/mail/dovecot-1.0.beta8/src/auth' if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/lib -I../../src/lib-sql -I../../src/lib-settings -I../../src/lib-ntlm -DAUTH_MODULE_DIR=\""/usr/local/lib/dovecot/auth"\" -DPKG_LIBEXECDIR=\""/usr/local/libexec/dovecot"\" -I@includedir@ @INCLUDE_des@ -I/usr/local/include -I/usr/include/kerberosV -std=gnu99 -O2 -march=athlon -pipe -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mycrypt.o -MD -MP -MF ".deps/mycrypt.Tpo" -c -o mycrypt.o mycrypt.c; \ then mv -f ".deps/mycrypt.Tpo" ".deps/mycrypt.Po"; else rm -f ".deps/mycrypt.Tpo"; exit 1; fi gcc: cannot specify -o with -c or -S and multiple compilations gmake[3]: *** [mycrypt.o] Error 1 gmake[3]: Leaving directory /src/mail/dovecot-1.0.beta8/src/auth' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory /src/mail/dovecot-1.0.beta8/src' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory /src/mail/dovecot-1.0.beta8' gmake: *** [all] Error 2

Gnu-make versus BSD make doesn't differ.

Compile options were:

./configure
--sysconfdir=/etc/dovecot
--localstatedir=/var
--infodir=/usr/share/info
--mandir=/usr/share/man
--disable-rpath
--enable-ipv6
--enable-asserts
--without-shadow
--without-pam
--without-vpopmail
--with-pgsql
--with-mysql
--with-ssl=openssl
--with-ssldir=/etc/ssl
--with-storages='maildir mbox'
--with-sql-drivers
CFLAGS='-O2 -march=athlon -pipe'
LDFLAGS='-L/usr/local/lib'
CPPFLAGS='-I/usr/local/include -I/usr/include/kerberosV'

What other data can I provide to help figure out what's going wrong?

-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (MingW32)

iQIVAwUBRId0x6fRmhqF/IZAAQpbAA//fA6N6WS1ybpYcGvKJf77YB/MHm0GMQ1f Hg0jDydJ2gsRZH+Z3lGUOHCflfmfCE7oV0xAqMxhUTWvw7sfgIXTHOJ5jRMhr430 QAA8NPseZMJJB42nBmOSzu2/D4guF4cKwhVIX6NveQlLFT//NGTawzsVnHRgeS8q L6ORjmh7YrPuGzc+x+1UOkG1KvX9pwEE9i0P6O9m/eag1sJwQgEcNsHpobJ7MGAc 7PkkccSr9q6MaBbC7JivyQSphV/lHMEE1GK1u0AZ4ogfIVDDEURH2/gjkPfQDE3x gT8qIzqdtKjsFVnA5Hd9JumcaGjhukouoh4ZYFyo8EmEfo7KL5nM1WM9daaTAsO1 myCmz2+TsvZgaUJI+tOnjV/YtKgBtZxNylELL8o/cm68SdlPoTE5MfkSKhvzco+L PVgUwYiiRx+/MBUtQ+PvXsFC4LF0OsQtu3EaO/V/u4GhqWXDgxQzZwCXhHCQXuYT Nkb9CDL31qGS3onU/nOR1S6Jy43+L6g/fc3joR2Bsj8rvPOUUAbw24oSqf/MNZIE K4ZJ+1W/Ssl+gwjpnwIWsgwiCzoORAwt1kGtfiCj0BYBPew9UWqT0eBtMvhWHMTI QkjujAL/aryLfZ2FWwIroDYvmayWnpMt3NGJPvDsbqnC89qo8jmhB3dTjS3hwJqB eMuE4BU2kZI= =HhOT -----END PGP SIGNATURE-----

!DSPAM:448774e341651165784361!

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512

Sorry, yes. I meant the failure to compile.

This was a bare-metal install of OpenBSD 3.9, but I'll go back, re-install from distribution media and rebuild the system from the main branch just to be sure.

Thanks,

Ed V.

IBM: Inconsistent Business machines 7 June 2006 19:15:04

Brad wrote:

What crash? or do you mean it fails to compile? If it still fails to compile using the ports tree version of Dovecot as is then you have a problem with your system itself.

On Wed, Jun 07, 2006 at 06:52:24PM -0600, B.O.F.H. wrote: Actually, from the OpenBSD 3.9 ports tree, the version is 1.0b3 and it crashes the same way...

I'm semi-willing to read the GCC man page, can you give me at least a small hint as to where to start looking?

-- Ed V.

7 June 2006 18:51:04

Chris Cappuccio wrote:

...

...

...

You have two choices, you can either

1. Use the port

or

2. Read the gcc manual page

B.O.F.H. [bofh@null-route.org] wrote: This is for all versions from 1.0b3 - 1.0b8

All crash at the same place:

Making all in auth gmake[3]: Entering directory /src/mail/dovecot-1.0.beta8/src/auth' if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/lib -I../../src/lib-sql -I../../src/lib-settings -I../../src/lib-ntlm -DAUTH_MODULE_DIR=\""/usr/local/lib/dovecot/auth"\" -DPKG_LIBEXECDIR=\""/usr/local/libexec/dovecot"\" -I@includedir@ @INCLUDE_des@ -I/usr/local/include -I/usr/include/kerberosV -std=gnu99 -O2 -march=athlon -pipe -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mycrypt.o -MD -MP -MF ".deps/mycrypt.Tpo" -c -o mycrypt.o mycrypt.c; \ then mv -f ".deps/mycrypt.Tpo" ".deps/mycrypt.Po"; else rm -f ".deps/mycrypt.Tpo"; exit 1; fi gcc: cannot specify -o with -c or -S and multiple compilations gmake[3]: *** [mycrypt.o] Error 1 gmake[3]: Leaving directory /src/mail/dovecot-1.0.beta8/src/auth' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory /src/mail/dovecot-1.0.beta8/src' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory /src/mail/dovecot-1.0.beta8' gmake: *** [all] Error 2

Gnu-make versus BSD make doesn't differ.

Compile options were:

./configure
--sysconfdir=/etc/dovecot
--localstatedir=/var
--infodir=/usr/share/info
--mandir=/usr/share/man
--disable-rpath
--enable-ipv6
--enable-asserts
--without-shadow
--without-pam
--without-vpopmail
--with-pgsql
--with-mysql
--with-ssl=openssl
--with-ssldir=/etc/ssl
--with-storages='maildir mbox'
--with-sql-drivers
CFLAGS='-O2 -march=athlon -pipe'
LDFLAGS='-L/usr/local/lib'
CPPFLAGS='-I/usr/local/include -I/usr/include/kerberosV'

What other data can I provide to help figure out what's going wrong?

!DSPAM:448777a798481207920780!

-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (MingW32)

iQIVAwUBRId6mKfRmhqF/IZAAQql5hAA5M4gt0AGwVZSUeCstQI7vBHeKv3XuW3x HDeiXJogSfs+HTZ5zQfT5wsEBnPwBztiHwITBHGknxqmKITtAGlm3R/d1FPXsDVE 2UllaRTjJZyv1P/0b2afG3j4sFRkvZv54KQs8ZQu/02va+o3uZYkOGI0GoenVWJC qWeSJnP2NA1aEj4Uy/K1XqWqFIFz5/oKK8TDJclZO//NXPhNt0vWpOzfnhn5vwid ApRXK4BLuCjvRRRblrh1xxC/m61wPFQBvgRVGcuNPUd68TBVvtjRA8O+R6C+uA4t dSydttoO8KZSDtXVYzi4JxJb8noLOEeBjl+acZZS8Y+i2cVClMiHCTw7NxSUDQwE uSuniGg26pr4IqvymbCp+R+ZF5voM8G4QXjr4CVP5evo/wxrR3fab9+4m4M0DDBz aK5JP4SqbxHU1I3cjwtPRCo/Zha0RSabR3rNETJShDGBzdt1Gz5pvCTBqEiFGJ2/ KHt7QIN4SPZ/8p4hgACvfbDM2JTXsB6hcr44xaP0ezOz1hgu3c8OvR0Fkg0m//l7 grHNLuiFW+QGs8any/B4Sz9ZDhGBbfEmlIFZ+PUj3ZDSpg/UW+pAYWDw0NfToooe nZIfBo5rDiZT7gnWP9mHXVpkh9XUMLGUY+BWEewC2ZMpq7K9oRZUZ0CypEBKpghi jk32vROq/8w= =WuxB -----END PGP SIGNATURE-----

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512

Well, a bit more research and I think I found the symptom. Still not sure of the cause and I'll fully admit not being a savvy programmer and therefore able to suggest a decent resolution.

It seems that _something_ in either the main "configure" script or one of the Makefile.in templates is causing the Makefiles in src/auth and src/util to add two variables named "AUTH_CFLAGS" and "AUTH_LIBS", which on first look makes sense.

Looking a bit deeper, they both contain variables in the format "@VARNAME@" which I'm presuming _should_ have been replaced with actual paths and/or "-l" statements during the configure process.

Those being:

AUTH_CFLAGS = -I@includedir@ @INCLUDE_des@ AUTH_LIBS = -L@libdir@ -lgssapi -lkrb5 -lasn1 @LIB_des_appl@

• -lroken @LIB_crypt@ @LIB_dbopen@ @LIBS@ -L/usr/local/lib -lpq
• -L/usr/local/lib/mysql -lmysqlclient -lz -lm

Two issues become apparent:

1 - Somehow, the unexpanded "@" variables are making it to the command line 2 - "-lroken" is a Linux specific library and is not found in most *BSD's. Generally configure scripts replace it with "-lcrypto" on host OS detection.

This can be displayed by looking at the errors for both auth and util:

Making all in auth gmake[3]: Entering directory `/src/mail/dovecot-1.0.beta8/src/auth' if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/lib then mv -f ".deps/mycrypt.Tpo" ".deps/mycrypt.Po"; else rm -f

• -I../../src/lib-sql -I../../src/lib-settings -I../../src/lib-ntlm
• -DAUTH_MODULE_DIR=\""/usr/local/lib/dovecot/auth"\"
• -DPKG_LIBEXECDIR=\""/usr/local/libexec/dovecot"\" -I@includedir@ @INCLUDE_des@ -I/usr/local/include -I/usr/include/kerberosV
• -std=gnu99 -O2 -march=athlon -pipe -Wall -W -Wmissing-prototypes
• -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2
• -Wbad-function-cast -MT mycrypt.o -MD -MP -MF ".deps/mycrypt.Tpo"
• -c -o mycrypt.o mycrypt.c; \

".deps/mycrypt.Tpo"; exit 1; fi gcc: cannot specify -o with -c or -S and multiple compilations gmake[3]: *** [mycrypt.o] Error 1 gmake[3]: Leaving directory /src/mail/dovecot-1.0.beta8/src/auth' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory /src/mail/dovecot-1.0.beta8/src' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/src/mail/dovecot-1.0.beta8' gmake: *** [all] Error 2

Making all in util gmake[3]: Entering directory `/src/mail/dovecot-1.0.beta8/src/util' if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/lib - then mv -f ".deps/gdbhelper.Tpo" ".deps/gdbhelper.Po"; else rm -f

• -I../../src/auth -I/usr/local/include -I/usr/include/kerberosV -
• -std=gnu99 -O2 -march=athlon -pipe -Wall -W -Wmissing-prototypes -
• -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2
• • -Wbad-function-cast -MT rawlog.o -MD -MP -MF ".deps/rawlog.Tpo"
• -c - -o rawlog.o rawlog.c; \ then mv -f ".deps/rawlog.Tpo" ".deps/rawlog.Po"; else rm -f ".deps/rawlog.Tpo"; exit 1; fi /bin/sh ../../libtool --mode=link --tag=CC gcc -std=gnu99 -O2 -
• -march=athlon -pipe -Wall -W -Wmissing-prototypes
• • -Wmissing-declarations -Wpointer-arith -Wchar-subscripts
• -Wformat=2 - -Wbad-function-cast -L/usr/local/lib -o rawlog rawlog.o ../lib/liblib.a mkdir .libs gcc -std=gnu99 -O2 -march=athlon -pipe -Wall -W -Wmissing-prototypes
• • -Wmissing-declarations -Wpointer-arith -Wchar-subscripts
• -Wformat=2 - -Wbad-function-cast -o rawlog rawlog.o -L/usr/local/lib ../lib/liblib.a if gcc -DHAVE_CONFIG_H -I. -I. -I../..
• -I../../src/lib - -I../../src/auth -I/usr/local/include
• -I/usr/include/kerberosV - -std=gnu99 -O2 -march=athlon -pipe -Wall
• -W -Wmissing-prototypes - -Wmissing-declarations -Wpointer-arith
• -Wchar-subscripts -Wformat=2 - -Wbad-function-cast -MT gdbhelper.o
• -MD -MP -MF ".deps/gdbhelper.Tpo" -c -o gdbhelper.o gdbhelper.c; \

".deps/gdbhelper.Tpo"; exit 1; fi /bin/sh ../../libtool --mode=link directory

• --tag=CC gcc -std=gnu99 -O2 - -march=athlon -pipe -Wall -W
• -Wmissing-prototypes
• • -Wmissing-declarations -Wpointer-arith -Wchar-subscripts
• -Wformat=2 - -Wbad-function-cast -L/usr/local/lib -o gdbhelper gdbhelper.o ../lib/liblib.a gcc -std=gnu99 -O2 -march=athlon -pipe -Wall -W -Wmissing-prototypes
• • -Wmissing-declarations -Wpointer-arith -Wchar-subscripts
• -Wformat=2 - -Wbad-function-cast -o gdbhelper gdbhelper.o
• -L/usr/local/lib ../lib/liblib.a if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/lib -
• -I../../src/auth -I/usr/local/include -I/usr/include/kerberosV -
• -std=gnu99 -O2 -march=athlon -pipe -Wall -W -Wmissing-prototypes -
• -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2
• • -Wbad-function-cast -MT dovecotpw.o -MD -MP -MF ".deps/dovecotpw.Tpo" -c -o dovecotpw.o dovecotpw.c; \ then mv -f ".deps/dovecotpw.Tpo" ".deps/dovecotpw.Po"; else rm -f ".deps/dovecotpw.Tpo"; exit 1; fi /bin/sh ../../libtool --mode=link
• --tag=CC gcc -std=gnu99 -O2 - -march=athlon -pipe -Wall -W
• -Wmissing-prototypes - -Wmissing-declarations -Wpointer-arith
• -Wchar-subscripts -Wformat=2 - -Wbad-function-cast
• -L/usr/local/lib -o dovecotpw dovecotpw.o ../auth/libpassword.a ../lib-ntlm/libntlm.a ../lib/liblib.a - -L@libdir@ -lgssapi -lkrb5
• -lasn1 @LIB_des_appl@ -lroken @LIB_crypt@ @LIB_dbopen@ @LIBS@
• -L/usr/local/lib -lpq -L/usr/local/lib/mysql
• • -lmysqlclient -lz -lm -export-dynamic ../../libtool[6473]: cd: /src/mail/dovecot-1.0.beta8/src/util/@libdir@ - No such file or

libtool: link: cannot determine absolute directory name of @libdir@' gmake[3]: *** [dovecotpw] Error 1 gmake[3]: Leaving directory /src/mail/dovecot-1.0.beta8/src/util' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory /src/mail/dovecot-1.0.beta8/src' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory /src/mail/dovecot-1.0.beta8' gmake: *** [all] Error 2

To get Dovecot to build, I manually went into both Makefiles, made "AUTH_CFLAGS" empty and deleted all "@" references and "-lroken" in "AUTH_LIBS" replacing them with "-lcrypto"

Once I did that, it built successfully and has not thrown any errors.

Ed V.

8 June 2006 14:58:10

Brad wrote:

What crash? or do you mean it fails to compile? If it still fails to compile using the ports tree version of Dovecot as is then you have a problem with your system itself.

On Wed, Jun 07, 2006 at 06:52:24PM -0600, B.O.F.H. wrote: Actually, from the OpenBSD 3.9 ports tree, the version is 1.0b3 and it crashes the same way...

I'm semi-willing to read the GCC man page, can you give me at least a small hint as to where to start looking?

-- Ed V.

7 June 2006 18:51:04

Chris Cappuccio wrote:

...

...

...

You have two choices, you can either

1. Use the port

or

2. Read the gcc manual page

B.O.F.H. [bofh@null-route.org] wrote: This is for all versions from 1.0b3 - 1.0b8

All crash at the same place:

Making all in auth gmake[3]: Entering directory /src/mail/dovecot-1.0.beta8/src/auth' if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/lib -I../../src/lib-sql -I../../src/lib-settings -I../../src/lib-ntlm -DAUTH_MODULE_DIR=\""/usr/local/lib/dovecot/auth"\" -DPKG_LIBEXECDIR=\""/usr/local/libexec/dovecot"\" -I@includedir@ @INCLUDE_des@ -I/usr/local/include -I/usr/include/kerberosV -std=gnu99 -O2 -march=athlon -pipe -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mycrypt.o -MD -MP -MF ".deps/mycrypt.Tpo" -c -o mycrypt.o mycrypt.c; \ then mv -f ".deps/mycrypt.Tpo" ".deps/mycrypt.Po"; else rm -f ".deps/mycrypt.Tpo"; exit 1; fi gcc: cannot specify -o with -c or -S and multiple compilations gmake[3]: *** [mycrypt.o] Error 1 gmake[3]: Leaving directory /src/mail/dovecot-1.0.beta8/src/auth' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory /src/mail/dovecot-1.0.beta8/src' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory /src/mail/dovecot-1.0.beta8' gmake: *** [all] Error 2

Gnu-make versus BSD make doesn't differ.

Compile options were:

./configure
--sysconfdir=/etc/dovecot
--localstatedir=/var
--infodir=/usr/share/info
--mandir=/usr/share/man
--disable-rpath
--enable-ipv6
--enable-asserts
--without-shadow
--without-pam
--without-vpopmail
--with-pgsql
--with-mysql
--with-ssl=openssl
--with-ssldir=/etc/ssl
--with-storages='maildir mbox'
--with-sql-drivers
CFLAGS='-O2 -march=athlon -pipe'
LDFLAGS='-L/usr/local/lib'
CPPFLAGS='-I/usr/local/include -I/usr/include/kerberosV'

What other data can I provide to help figure out what's going wrong?

!DSPAM:448777a798481207920780!

-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (MingW32)

iQIVAwUBRIiPj6fRmhqF/IZAAQqhpw/7Bf+SUB/O1V4uYWNik/h2pvikf9K+7zO/ 040aw4W3yyIsW9ER1BnV9XgGvhUxeDyR095ZTaFORX/iVcTtNYtu++fb2sIujmGT EJffOvh/Lpb6G9cxTD47uifXR/9yPKGUnISBH3UxkB80DFK+DNWBW8buAbxlS5sK g7NpuRev7AVDDkI7/ybpjTl+OEUeMRl1CW0EsxPsw6rc8nu4s9CQoTa2LeYZCjY6 L1Y5ODxjzFYkmN8rGV4s5NkPIwzTCjFNeYr41rVLSZ4ggwZ8TqXQR5eTZFgBYMcr KCv2y5y2PHn2JJnQTKyaCUeBROsRKfkaXOicggAqyaxSpq0943NktnA1y9K66MtD u0zUkH1Lae1rZOmiWJmJvxHd3MLfbwhpULfYMy38epIHfQIPT8wLxpbOZ5cQdUel Q+9MGafmHsYzZRTGByB3OV5sbFZ7pczq1wDdKJgTfXLIpbgbGLRQRs/3KWms0zn2 6thHO9wFhUpts7uXCjNJUQE023sjyT0e88cXae23IVQ8aiPrLFXhQngTsDPnpzxg 4wjvpnp4hjtf2h0zrNKt3Hzlb+l3JcYslU7aF7MCgh3pmt+Kd5UdJKzVD9x7fnxN kapbfDSbV+SkrGn61qj4UQxFisJ06J4Sc6xPYPYnCXgUC/til4V4H5nv8YBJO23X anXZ2jvrNsc= =jODg -----END PGP SIGNATURE-----