Dict proxy client returning empty string instead of multiline string

Aki Tuomi aki.tuomi at dovecot.fi
Mon Oct 17 19:18:02 UTC 2016


Oh duh, it used datastack pool. Try again with the attached patch? Please remember to clear the previous one out before trying.

Aki

> 
> The trace is missing some symbols, I will debug tomorrow and see where
> the call comes from exactly.
> 
> Regards,
> 
> 
> On 10/17/2016 06:23 PM, Aki Tuomi wrote:
> > Hi!
> > 
> > Looking at the code, I think the bug is that it just copies pointer to the value, it should, instead, duplicate the value to some memory region. Can you see if this following patch fixes it?
> > 
> > Aki
> > 
> >> On October 17, 2016 at 4:14 PM Pierre Jaury <pierre at jaury.eu> wrote:
> >>
> >>
> >> Okay, it seems to me that the bug is due to "t_str_tabunescape" using
> >> the unsafe datastack ("t_strdup_noconst") while the string is actually
> >> returned in an async callback.
> >>
> >> Before it is handled by "client_dict_lookup", "client_dict_wait"
> >> actually fires some IO loops that are more than likely to call "t_pop"
> >> and free/flush the result string (I checked, it does call "t_pop" a
> >> couple times indeed). Maybe it would be safer to use a standard
> >> datastack pool when unescaping a string in that context.
> >>
> >> I could work on a patch that would:
> >>
> >>  - add an optional "pool" attribute to the "client_dict_cmd" structure,
> >>  - pass the pool to the async lookup function,
> >>  - use the pool when escaping strings that should survive the callback
> >>    chain
> >>
> >> What do you think?
> >>
> >> Regards,
> >> kaiyou
> >>
> >>
> >> On 10/17/2016 09:52 AM, Pierre Jaury wrote:
> >>> While trying to isolate properly and reproduce, I was able to trigger
> >>> the same bug with the following code:
> >>>
> >>>   struct dict *dict;
> >>>   char* dict_uri = "proxy::sieve";
> >>>   char* key = "priv/key";
> >>>   char* username = "admin at domain.tld";
> >>>   char* value, error;
> >>>
> >>>   dict_drivers_register_builtin();
> >>>   dict_init(dict_uri, DICT_DATA_TYPE_STRING, username,
> >>>     doveadm_settings->base_dir, &dict, &error);
> >>>   dict_lookup(dict, pool_datastack_create(), key, &value);
> >>>   printf(">%s\n", value); // outputs an empty string
> >>>   dict_deinit(&dict);
> >>>
> >>> I trimmed it to the bare minimal string manipulation functions involved
> >>> but cannot reproduce in that case:
> >>>
> >>>   pool_t pool = pool_datastack_create();
> >>>
> >>>   char* s1 = "test\001n\001rtest";
> >>>   char* s2 = t_str_tabunescape(s1);
> >>>   char* s3 = p_strdup(pool, s2);
> >>>
> >>>   printf("1>%s\n", s1);
> >>>   printf("2>%s\n", s2);
> >>>   printf("3>%s\n", s3); // all three output the string with NL and CR
> >>>
> >>> Maybe I am missing a function call in the process or maybe the issue is
> >>> related to the way unescaping is performed in the async callback
> >>> function in "dict-client.c", or maybe even some other edge case.
> >>>
> >>> Finally, I was able to run the first snippet without bug by removing the
> >>> string duplication in "t_str_tabunescape" (which I realize is not a
> >>> proper solution), or by explicitely using the following pool:
> >>>
> >>>   return str_tabunescape(p_strdup(pool_datastack_create(), str));
> >>>
> >>>
> >>> Hope this helps.
> >>>
> >>> kaiyou
> >>>
> >>>
> >>> On 10/17/2016 07:51 AM, Aki Tuomi wrote:
> >>>> Hi!
> >>>>
> >>>> This does sound like a bug, we'll have look.
> >>>>
> >>>> Aki
> >>>>
> >>>>
> >>>> On 17.10.2016 01:26, Pierre Jaury wrote:
> >>>>> I dived a little bit further into the rabbit hole, up to the point where
> >>>>> debugging has become unpracticle but I still haven't found the root
> >>>>> cause for sure.
> >>>>>
> >>>>> I read most of the code for "p_strdup" based on datastack memory pools
> >>>>> (which are used for dictionary lookups both with doveadm and by extdata)
> >>>>> and it seems ok. Still, after "t_malloc_real" is called in "t_malloc0",
> >>>>> the allocated buffer has the same address as the source string.
> >>>>>
> >>>>> The only sensible explanation I can come up with is that during
> >>>>> unescaping, strings are not allocated properly, leading to the memory
> >>>>> pool reusing the string address and zeroing it in the process before the
> >>>>> string copy operation.
> >>>>>
> >>>>> I will follow on this path tomorrow, any lead is more than welcome.
> >>>>>
> >>>>> kaiyou.
> >>>>>
> >>>>> On 10/16/2016 11:16 PM, Pierre Jaury wrote:
> >>>>>> Hello,
> >>>>>>
> >>>>>> I am using a dict proxy for my sieve extdata plugin to access some
> >>>>>> fields from an SQLite database (autoreply text and other
> >>>>>> database-configured items).
> >>>>>>
> >>>>>> All tests are performed against version 2.2.25.
> >>>>>>
> >>>>>>   $ dovecot --version
> >>>>>>   2.2.25 (7be1766)
> >>>>>>
> >>>>>> My configuration looks like:
> >>>>>>
> >>>>>>   dict {
> >>>>>>     sieve = sqlite:/etc/dovecot/pigeonhole-sieve.dict
> >>>>>>   }
> >>>>>>
> >>>>>>   [...]
> >>>>>>   sieve_extdata_dict_uri = proxy::sieve
> >>>>>>
> >>>>>> I am able to read pretty much any attribute without any issue, except
> >>>>>> when the value contains a special character like "\r" or "\n". By using
> >>>>>> the doveadm dict client, I narrowed it down to the dictionary management
> >>>>>> part (either server, protocol or client).
> >>>>>>
> >>>>>> I was suspecting escaping functions from "lib/strescape.c" (mostly
> >>>>>> str_tabescape and its counterpart, used by "lib-dict/client.c"), so I
> >>>>>> monitored socket communications. It seems that escaping is done properly
> >>>>>> on the server and the socket is not an issue either.
> >>>>>>
> >>>>>> The following strace dump results from running "doveadm dict get"
> >>>>>> against the dict socket:
> >>>>>>
> >>>>>>   connect(8, {sa_family=AF_UNIX, sun_path="..."}, 110) = 0
> >>>>>>   fstat(8, {st_mode=S_IFSOCK|0777, st_size=0, ...}) = 0
> >>>>>>   [...]
> >>>>>>   write(8, "H2\t0\t0\tadmin at domain.tld\tsieve\n", 30) = 30
> >>>>>>   [...]
> >>>>>>   read(8, "Otest\1r\1ntest\n", 8192)      = 14
> >>>>>>
> >>>>>> Indeed "\1r" and "\1n" are the escape sequences used by
> >>>>>> "lib/strescape.c". I went deeped and debugged the call to "dict_lookup"
> >>>>>> performed by doveadm. Indeed the client gets the proper string from the
> >>>>>> socket and to my surprise, it is properly unescaped.
> >>>>>>
> >>>>>> Then, in "client_dict_lookup" ("lib-dict/dict-client.c"), the call to
> >>>>>> "p_strdup" returns an empty string (null byte set at the target address).
> >>>>>>
> >>>>>> Before the call to the dict "->lookup" attribute (client_dict_lookup):
> >>>>>>
> >>>>>>    RAX: 0x7ffff73a37c0 (push   r14)
> >>>>>>    RBX: 0x6831b8 ("priv/reply_body")
> >>>>>>    RCX: 0x7fffffffe240 --> 0x682a60 --> 0x6831b8 ("priv/reply_body")
> >>>>>>    RDX: 0x6831b8 ("priv/reply_body")
> >>>>>>    RSI: 0x683288 --> 0x7ffff7653120 --> 0x7ffff73ea620 ([...])
> >>>>>>    RDI: 0x690ad0 --> 0x7ffff7400713 --> 0x75250079786f7270 ('proxy')
> >>>>>>
> >>>>>>    0x7ffff73a1f10 <dict_lookup+32>:	mov    rcx,r11 (value_r)
> >>>>>>    0x7ffff73a1f13 <dict_lookup+35>:	mov    rdx,r8 (key)
> >>>>>>    0x7ffff73a1f16 <dict_lookup+38>:	mov    rsi,r10 (pool)
> >>>>>>    0x7ffff73a1f19 <dict_lookup+41>:	mov    rdi,r9 (dict)
> >>>>>>    0x7ffff73a1f1c <dict_lookup+44>:	add    rsp,0x8
> >>>>>> => 0x7ffff73a1f20 <dict_lookup+48>:	jmp    rax
> >>>>>>
> >>>>>> Before the call to p_strdup in "client_dict_lookup":
> >>>>>>
> >>>>>>    RSI: 0x6832d8 ("test\r\ntest") (lookup.result.value)
> >>>>>>    RDI: 0x683288 --> 0x7ffff7653120 --> [...] (pool)
> >>>>>>    RAX: 0x0 (result)
> >>>>>>
> >>>>>>    0x7ffff73a384f:	nop
> >>>>>>    0x7ffff73a3850:	mov    rsi,QWORD PTR [rsp+0x8]
> >>>>>>    0x7ffff73a3855:	mov    rdi,r14
> >>>>>> => 0x7ffff73a3858:	call   0x7ffff736d3c0 <p_strdup at plt>
> >>>>>>    0x7ffff73a385d:	mov    QWORD PTR [r13+0x0],rax
> >>>>>>    0x7ffff73a3861:	mov    rsi,QWORD PTR [rsp+0x18]
> >>>>>>    0x7ffff73a3866:	xor    rsi,QWORD PTR fs:0x28
> >>>>>>    0x7ffff73a386f:	mov    eax,ebx
> >>>>>>
> >>>>>> After the call:
> >>>>>>
> >>>>>>    0x7ffff73a3850:	mov    rsi,QWORD PTR [rsp+0x8]
> >>>>>>    0x7ffff73a3855:	mov    rdi,r14
> >>>>>>    0x7ffff73a3858:	call   0x7ffff736d3c0 <p_strdup at plt>
> >>>>>> => 0x7ffff73a385d:	mov    QWORD PTR [r13+0x0],rax
> >>>>>>    0x7ffff73a3861:	mov    rsi,QWORD PTR [rsp+0x18]
> >>>>>>    0x7ffff73a3866:	xor    rsi,QWORD PTR fs:0x28
> >>>>>>    0x7ffff73a386f:	mov    eax,ebx
> >>>>>>    0x7ffff73a3871:	jne    0x7ffff73a38da
> >>>>>>
> >>>>>>    RSI: 0x0
> >>>>>>    RDI: 0x6832d8 --> 0x0
> >>>>>>    RAX: 0x6832d8 --> 0x0 (result)
> >>>>>>
> >>>>>> It is worth noting that I can reproduce the exact same execution flow
> >>>>>> with a non-multiline result string (lookup.result.value) that is
> >>>>>> properly copied by "p_strdup" and returned in RAX, then displayed by
> >>>>>> doveadm.
> >>>>>>
> >>>>>> I am not familiar with the pooling mechanism hidden behind the call to
> >>>>>> p_strdump and not quite sure why this behaviour is emerging. Maybe I am
> >>>>>> even miles away from an understanding of the issue here, but it sounds
> >>>>>> to me like something is wrong in the way "p_strdup" performs the copy.
> >>>>>>
> >>>>>> Hope this helps,
> >>>>>> kaiyou.
> >>>>>>
> >>>>>>
> >>>>> >
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-lib-dict-Duplicate-result-value-in-mempool.patch
Type: text/x-diff
Size: 1759 bytes
Desc: not available
URL: <http://dovecot.org/pipermail/dovecot/attachments/20161017/55ea3a85/attachment.bin>


More information about the dovecot mailing list