LMTP error, mysterious
Aki Tuomi
aki.tuomi at dovecot.fi
Thu Aug 2 02:10:29 EEST 2018
applies for ldap too if you use prefetch.
---Aki TuomiDovecot oy
-------- Original message --------From: Andras Kemeny <pdx at pdx.hu> Date: 02/08/2018 01:59 (GMT+02:00) To: dovecot at dovecot.org Subject: Re: LMTP error, mysterious
ah well, but i'm not using sql at all.
here's doveconf -n:
# 2.2.27 (c0f36b0): /etc/dovecot/dovecot.conf
# Pigeonhole version 0.4.16 (fed8554)
# OS: Linux 4.9.0-4-amd64 x86_64 Debian 9.4
auth_cache_negative_ttl = 0
auth_mechanisms = plain login
hostname = rhyno.tech
mail_debug = yes
mail_location = maildir:~/mail
namespace inbox {
inbox = yes
location =
mailbox Drafts {
special_use = \Drafts
}
mailbox Junk {
special_use = \Junk
}
mailbox Sent {
special_use = \Sent
}
mailbox "Sent Messages" {
special_use = \Sent
}
mailbox Trash {
special_use = \Trash
}
prefix =
}
passdb {
args = /etc/dovecot/dovecot-ldap.conf.ext
driver = ldap
}
protocols = " imap lmtp pop3"
service auth-worker {
user = $default_internal_user
}
service auth {
unix_listener /var/spool/postfix/private/auth {
group = postfix
mode = 0660
user = postfix
}
}
service imap-login {
inet_listener imap {
port = 143
}
inet_listener imaps {
port = 993
ssl = yes
}
}
service lmtp {
process_min_avail = 5
unix_listener /var/spool/postfix/private/dovecot-lmtp {
group = postfix
mode = 0600
user = postfix
}
}
service pop3-login {
inet_listener pop3 {
port = 0
}
inet_listener pop3s {
port = 0
}
}
ssl_cert = </etc/letsencrypt/live/wc-rhyno.tech/fullchain.pem
ssl_key = # hidden, use -P to show it
submission_host = localhost:25
userdb {
driver = prefetch
}
protocol lmtp {
mail_plugins = sieve
}
protocol lda {
mail_plugins = sieve
}
protocol imap {
imap_client_workarounds = tb-extra-mailbox-sep
}
2018. 08. 02. 0:48 keltezéssel, Aki
Tuomi írta:
protocol lmtp {
userdb {
driver = sql
args = /path/to/dovecot-sql.conf.ext
}
}
---
Aki Tuomi
Dovecot oy
-------- Original message --------
From: Andras Kemeny <pdx at pdx.hu>
Date: 02/08/2018 01:35 (GMT+02:00)
To: dovecot at dovecot.org
Subject: LMTP error, mysterious
hi (especially to you, Aki),
so to solve the previous UID issue, i went the full LMTP route.
however,
i seem to be having problems with the prefetch userdb (i'm trying
to
minimize load on the LDAP server). namely, the log says:
Aug 2 00:15:35 rhyno postfix/submission/smtpd[21158]:
5EEF35C05C5:
client=localhost[127.0.0.1], sasl_method=login, sasl_username=aik
Aug 2 00:15:40 rhyno postfix/cleanup[22201]: 5EEF35C05C5:
message-id=<20180801221535.5EEF35C05C5 at beach.rhyno.tech>
Aug 2 00:15:40 rhyno postfix/qmgr[17437]: 5EEF35C05C5:
from=<pdx at pdx.hu>, size=295, nrcpt=1 (queue active)
Aug 2 00:15:40 rhyno dovecot: lmtp(20321): Connect from local
Aug 2 00:15:40 rhyno dovecot: auth: Error:
prefetch(aik at rhyno.tech):
userdb lookup not possible with only userdb prefetch
Aug 2 00:15:40 rhyno dovecot: lmtp(aik at rhyno.tech): Error: user
aik at rhyno.tech: Auth USER lookup failed
Aug 2 00:15:41 rhyno postfix/lmtp[22211]: 5EEF35C05C5:
to=<aik at rhyno.tech>,
relay=beach.rhyno.tech[private/dovecot-lmtp],
delay=13, delays=13/0.01/0/0.03, dsn=4.3.0, status=deferred (host
beach.rhyno.tech[private/dovecot-lmtp] said: 451 4.3.0
<aik at rhyno.tech>
Internal error occurred. Refer to server log for more information.
(in
reply to RCPT TO command))
Aug 2 00:15:41 rhyno dovecot: lmtp(20321): Disconnect from local:
Successful quit
Aug 2 00:15:42 rhyno postfix/submission/smtpd[21158]: disconnect
from
localhost[127.0.0.1] ehlo=1 auth=1 mail=1 rcpt=1 data=1 quit=1
commands=6
(the above is a transcript of a full session i've done over
telneting to
localhost 587 and auth login-ing with valid credentials)
so, i've tested the actual login process, and it works flawlessly,
and
it looks like IMAP is up and running:
Connected to localhost.
Escape character is '^]'.
* OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID
ENABLE
IDLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Dovecot ready.
0 login aik at rhyno.tech ofCourseThisIsN0TtheRealPassword
0 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID
ENABLE
IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS
THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT
CHILDREN
NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC
ESEARCH
ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS BINARY MOVE
SPECIAL-USE] Logged in
1 list "" "%"
* LIST (\HasNoChildren \Sent) "." Sent
* LIST (\HasNoChildren \Trash) "." Trash
* LIST (\HasNoChildren) "." INBOX
1 OK List completed (0.000 + 0.000 secs).
2 status INBOX (MESSAGES)
* STATUS INBOX (MESSAGES 2)
2 OK Status completed (0.000 + 0.000 secs).
this is how i send the test mails:
Connected to localhost.
Escape character is '^]'.
220 beach.rhyno.tech mail server
ehlo x
250-beach.rhyno.tech
250-PIPELINING
250-SIZE 10240000
250-ETRN
250-STARTTLS
250-AUTH PLAIN LOGIN
250-AUTH=PLAIN LOGIN
250-ENHANCEDSTATUSCODES
250-8BITMIME
250-DSN
250 SMTPUTF8
auth login
334 VXNlcm5hbWU6
***obviously_masked***
334 UGFzc3dvcmQ6
***obviously_masked***
235 2.7.0 Authentication successful
mail from:<pdx at pdx.hu>
250 2.1.0 Ok
rcpt to:<aik at rhyno.tech>
250 2.1.5 Ok
data
354 End data with <CR><LF>.<CR><LF>
test
.
250 2.0.0 Ok: queued as 5EEF35C05C5
quit
221 2.0.0 Bye
Connection closed by foreign host.
my concern is these two:
Aug 2 00:15:40 rhyno dovecot: auth: Error:
prefetch(aik at rhyno.tech):
userdb lookup not possible with only userdb prefetch
Aug 2 00:15:40 rhyno dovecot: lmtp(aik at rhyno.tech): Error: user
aik at rhyno.tech: Auth USER lookup failed
10-auth.conf has these settings:
passdb {
driver = ldap
args = /etc/dovecot/dovecot-ldap.conf.ext
}
userdb {
driver = prefetch
}
dovecot-ldap.conf.ext has these settings (only the relevant ones)
dn = ***whatever, it works***
dnpass = ***whatever, it works***
auth_bind = no
base = dc=rhyno,dc=tech
pass_attrs = \
=user=%{ldap:uid}, \
=password=%{ldap:userPassword}, \
=userdb_home=%{ldap:homeDirectory}, \
=userdb_uid=%{ldap:uidNumber}, \
=userdb_gid=%{ldap:gidNumber}
pass_filter =
(&(objectclass=postfixUser)(mailacceptinggeneralid=%n)(mailacceptinggeneralid=@%d))
so what am i missing? also, this format of setting variables
(=<output_field>=%{<whatever_special_result_field>})
is never explained
on the wiki (or am i just blind?)
thanks in advance,
a
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://dovecot.org/pipermail/dovecot/attachments/20180802/cc0d4f71/attachment.html>
More information about the dovecot
mailing list