dying on osx

Fri Aug 10 19:34:19 EEST 2018

Ok I added the two users _dovecot & _dovenull to mail group, still get 
same error "Too many extra groups"


# grep mail /etc/group /usr/local/etc/dovecot/dovecot.conf
/etc/group:mail:*:6:_teamsserver,_dovecot,_dovenull
/etc/group:_mailman:*:78:
/usr/local/etc/dovecot/dovecot.conf:mail_debug = yes
/usr/local/etc/dovecot/dovecot.conf:mail_gid = mail
/usr/local/etc/dovecot/dovecot.conf:mail_location = 
mbox:~/Mail:INBOX=/var/mail/%u
/usr/local/etc/dovecot/dovecot.conf:mail_privileged_group = mail
/usr/local/etc/dovecot/dovecot.conf:mail_access_groups = mail
/usr/local/etc/dovecot/dovecot.conf:mail_uid = _dovecot

20180810-113132 imap(mkm)<68466></AfJRhdzHNt/AAAB>: Fatal: 
setgroups(mail,505) failed: Too many extra groups

Thanks
Mike


On 8/10/18 11:08, Mike Makuch wrote:
>
>
> $ grep dove /etc/passwd /etc/group
> /etc/passwd:_dovecot:*:214:6:Dovecot 
> Administrator:/var/empty:/usr/bin/false
> /etc/passwd:_dovenull:*:227:227:Dovecot 
> Authentication:/var/empty:/usr/bin/false
> /etc/group:certusers:*:29:root,_jabber,_postfix,_cyrus,_calendar,_dovecot
> /etc/group:_dovenull:*:227:
>
>
> I'm trying to build on osx so I can try to do some debugging. The 
> INSTALL.md says to do:
>
>
> $ more INSTALL.md
> Build Instructions
> ==================
>
> For most people, the usual:
>
> ```
> ./configure
> make
> sudo make install
> ```
>
> But there is no configure file. How would I generate the configure 
> file? Is it generated? Been a long time since I've done open source C 
> code..
>
> Thanks
>
> Mike
>
>
> On 8/10/18 11:04, Aki Tuomi wrote:
>> Is the user member of mail group?
>>
>>
>>
>> ---
>> Aki Tuomi
>> Dovecot oy
>>
>> -------- Original message --------
>> From: Mike Makuch <1mikemakuch at gmail.com>
>> Date: 10/08/2018 19:02 (GMT+02:00)
>> To: Aki Tuomi <aki.tuomi at dovecot.fi>
>> Cc: dovecot at dovecot.org
>> Subject: Re: dying on osx
>>
>> Maybe an old problem that has resurfaced???
>>
>> https://bugzilla.samba.org/show_bug.cgi?id=8773
>>
>> Mike
>>
>>
>>
>> On 8/10/18 10:54, Aki Tuomi wrote:
>>> I have to see if this is reproducible outside mac.
>>>
>>>
>>>
>>> ---
>>> Aki Tuomi
>>> Dovecot oy
>>>
>>> -------- Original message --------
>>> From: Mike Makuch <1mikemakuch at gmail.com>
>>> Date: 10/08/2018 18:46 (GMT+02:00)
>>> To: Aki Tuomi <aki.tuomi at dovecot.fi>
>>> Subject: Re: dying on osx
>>>
>>> I did find that page and tried a few things there. My config has all of
>>> the settings there except 3:
>>>
>>> mail_access_groups = mail
>>> mbox_read_locks = fcntl
>>> mbox_write_locks = fcntl
>>>
>>> I add them to my config, restart and get the same abort
>>>
>>> 20180810-103849 imap(mkm)<79213><MkA5ihZzmdh/AAAB>: Fatal:
>>> setgroups(mail,505) failed: Too many extra groups
>>>
>>> I've tried numerous other settings as well.
>>>
>>> Thanks for any further advice
>>>
>>> Mike
>>>
>>>
>>> On 8/10/18 08:45, Aki Tuomi wrote:
>>> > Can you try this config and report back?
>>> >
>>> > 
>>> https://superuser.com/questions/957272/dotlock-permissions-problems-with-dovecot-and-os-x-10-10-3
>>> >
>>> > Aki
>>> >
>>> >> On 10 August 2018 at 16:39 Mike Makuch <1mikemakuch at gmail.com> wrote:
>>> >>
>>> >>
>>> >> OSX 10.13.6 High Sierra, dovecot 2.3.2.1
>>> >>
>>> >> dovecot starts up and runs but dies as soon as my mail client makes a
>>> >> request with log and config below.
>>> >>
>>> >> And advice appreciated.
>>> >>
>>> >> Thanks
>>> >>
>>> >> Mike
>>> >>
>>> >>
>>> >>
>>> >> 20180810-083730 auth: Debug: auth client connected (pid=77432)
>>> >>
>>> >> 20180810-083730 auth: Debug: client in: AUTH    1 PLAIN
>>> >> service=imap    secured    session=xo1p2BRzZNd/AAAB lip=127.0.0.1
>>> >> rip=127.0.0.1    lport=143    rport=55140
>>> >> 20180810-083730 auth: Debug: client passdb out: CONT    1
>>> >> 20180810-083730 auth: Debug: client in: CONT    1 AG1rbQBta20xMjM=
>>> >> (previous base64 data may contain sensitive data)
>>> >> 20180810-083730 auth: Debug: 
>>> static(mkm,127.0.0.1,<xo1p2BRzZNd/AAAB>):
>>> >> lookup
>>> >> 20180810-083730 auth: Debug: client passdb out: OK 1 user=mkm
>>> >> host=localhost    nopasswd=y
>>> >> 20180810-083730 auth: Debug: master in: REQUEST 4201906177 77432
>>> >> 1    b8126b4b71be2959fc7716888eccc566 session_pid=77433
>>> >> request_auth_token
>>> >> 20180810-083730 auth-worker(77426): Debug:
>>> >> passwd(mkm,127.0.0.1,<xo1p2BRzZNd/AAAB>): lookup
>>> >> 20180810-083730 auth: Debug: master userdb out: USER 4201906177
>>> >> mkm    system_groups_user=mkm    uid=503 gid=20 home=/Users/mkm
>>> >> auth_token=4d2bb44168df3d63e4e1bb352e59de632bc7da49
>>> >> 20180810-083730 imap-login: Info: Login: user=<mkm>, method=PLAIN,
>>> >> rip=127.0.0.1, lip=127.0.0.1, mpid=77433, secured,
>>> >> session=<xo1p2BRzZNd/AAAB>
>>> >> 20180810-083730 imap(mkm)<77433><xo1p2BRzZNd/AAAB>: Fatal:
>>> >> setgroups(505) failed: Too many extra groups
>>> >>
>>> >> # doveconf -n
>>> >> # 2.3.2.1 (0719df592): /usr/local/etc/dovecot/dovecot.conf
>>> >> # OS: Darwin 17.7.0 x86_64
>>> >> # Hostname: pine
>>> >> auth_debug = yes
>>> >> auth_debug_passwords = yes
>>> >> default_internal_user = _dovecot
>>> >> default_login_user = _dovenull
>>> >> disable_plaintext_auth = no
>>> >> listen = 127.0.0.1
>>> >> log_path = /var/log/dovecot
>>> >> log_timestamp = "%Y%m%d-%H%M%S "
>>> >> mail_debug = yes
>>> >> mail_gid = staff
>>> >> mail_location = mbox:~/Mail:INBOX=/var/mail/%u
>>> >> mail_privileged_group = mail
>>> >> mail_uid = _dovecot
>>> >> passdb {
>>> >>     args = password=*** host=localhost nopasswd=y
>>> >>     driver = static
>>> >> }
>>> >> passdb {
>>> >>     args = login
>>> >>     driver = pam
>>> >> }
>>> >> protocols = imap
>>> >> service auth {
>>> >>     user = root
>>> >> }
>>> >> service imap-login {
>>> >>     inet_listener imap {
>>> >>       address = *
>>> >>       port = 143
>>> >>     }
>>> >> }
>>> >> ssl = no
>>> >> userdb {
>>> >>     driver = passwd
>>> >> }
>>> >>
>>> >>
>>>
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://dovecot.org/pipermail/dovecot/attachments/20180810/07684816/attachment-0001.html>