Connection refused (61)
Teno Deuter
gvgter at googlemail.com
Thu Jul 12 02:19:19 EEST 2018
Thank you very much for your help. Rally appreciated that
On Thu, Jul 12, 2018 at 1:17 AM, Larry Rosenman <larryrtx at gmail.com> wrote:
> Read the docs....
>
> Or, as I said earlier, get a (free) letsencrypt certificate.
>
>
> --
> Larry Rosenman http://www.lerctr.org/~ler
> Phone: +1 214-642-9640 E-Mail: larryrtx at gmail.com
> US Mail: 5708 Sabbia Drive, Round Rock, TX 78665-2106
>
> On 7/11/18, 6:16 PM, "Teno Deuter" <gvgter at googlemail.com> wrote:
>
> this is the result:
>
> 250-8BITMIME
> 250-ENHANCEDSTATUSCODES
> 250-SIZE 209715200
> 250-DSN
> 250-STARTTLS
> 250 HELP
>
> can I tell smtpd to to accept AUTH without encryption?
>
>
> On Thu, Jul 12, 2018 at 1:07 AM, Larry Rosenman <larryrtx at gmail.com> wrote:
> > If you telnet to port 25, do an EHLO host, does the response include AUTH? If not, opensmtpd is not offering AUTH over unencrypted port 25 connections.
> >
> >
> > --
> > Larry Rosenman http://www.lerctr.org/~ler
> > Phone: +1 214-642-9640 E-Mail: larryrtx at gmail.com
> > US Mail: 5708 Sabbia Drive, Round Rock, TX 78665-2106
> >
> > On 7/11/18, 6:05 PM, "Teno Deuter" <gvgter at googlemail.com> wrote:
> >
> > now in roundcube config I have the following:
> >
> > $config['default_host'] = 'my static IP';
> > $config['smtp_server'] = 'my static IP';
> > $config['smtp_port'] = 25;
> >
> > but I get the following:
> >
> > SMTP server does not support authentication ()
> > SMTP Error: Authentication failure: SMTP server does not support
> > authentication (Code: )
> >
> >
> >
> > On Thu, Jul 12, 2018 at 1:02 AM, Larry Rosenman <larryrtx at gmail.com> wrote:
> > > Yes.
> > >
> > > --
> > > Larry Rosenman http://www.lerctr.org/~ler
> > > Phone: +1 214-642-9640 E-Mail: larryrtx at gmail.com
> > > US Mail: 5708 Sabbia Drive, Round Rock, TX 78665-2106
> > >
> > > On 7/11/18, 6:02 PM, "Teno Deuter" <gvgter at googlemail.com> wrote:
> > >
> > > you mean to turn off TLS in roundcube config file?
> > >
> > > On Thu, Jul 12, 2018 at 12:51 AM, Larry Rosenman <larryrtx at gmail.com> wrote:
> > > > Turn off TLS for webmail. It's not leaving the machine.
> > > >
> > > > Or get a letsencrypt.org cert. (they are free) see acme.sh (https://github.com/Neilpang/acme.sh)
> > > >
> > > >
> > > > --
> > > > Larry Rosenman http://www.lerctr.org/~ler
> > > > Phone: +1 214-642-9640 E-Mail: larryrtx at gmail.com
> > > > US Mail: 5708 Sabbia Drive, Round Rock, TX 78665-2106
> > > >
> > > > On 7/11/18, 5:48 PM, "Teno Deuter" <gvgter at googlemail.com> wrote:
> > > >
> > > > which means I can't use a self-signed cert at all? Or can I define
> > > > this somewhere?
> > > >
> > > > On Thu, Jul 12, 2018 at 12:46 AM, Larry Rosenman <larryrtx at gmail.com> wrote:
> > > > > yep
> > > > >
> > > > > --
> > > > > Larry Rosenman http://www.lerctr.org/~ler
> > > > > Phone: +1 214-642-9640 E-Mail: larryrtx at gmail.com
> > > > > US Mail: 5708 Sabbia Drive, Round Rock, TX 78665-2106
> > > > >
> > > > > On 7/11/18, 5:46 PM, "Teno Deuter" <gvgter at googlemail.com> wrote:
> > > > >
> > > > > the maillog shows:
> > > > >
> > > > > reason="io-error: error:14037418:SSL routines:ACCEPT_SR_KEY_EXCH:tlsv1
> > > > > alert unknown ca"
> > > > >
> > > > > please note that I'm using a self-signed cert. Is that the reason?
> > > > >
> > > > > On Thu, Jul 12, 2018 at 12:42 AM, Larry Rosenman <larryrtx at gmail.com> wrote:
> > > > > > Then you need to look at the opensmtpd logs to figure out why the starttls is failing.
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Larry Rosenman http://www.lerctr.org/~ler
> > > > > > Phone: +1 214-642-9640 E-Mail: larryrtx at gmail.com
> > > > > > US Mail: 5708 Sabbia Drive, Round Rock, TX 78665-2106
> > > > > >
> > > > > > On 7/11/18, 5:42 PM, "Teno Deuter" <gvgter at googlemail.com> wrote:
> > > > > >
> > > > > > actually I did define the staic IP address already and now I get the
> > > > > > following in the roundcube error log:
> > > > > >
> > > > > > STARTTLS failed ()
> > > > > > Invalid response code received from server (-1)
> > > > > > Failed to write to socket: unknown error ()
> > > > > > SMTP Error: Authentication failure: STARTTLS failed (Code: )
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Thu, Jul 12, 2018 at 12:40 AM, Larry Rosenman <larryrtx at gmail.com> wrote:
> > > > > > > Yes, or, add another block of lines with lo (or lo0) depending on what your kernel uses for loopback in place of the $egress_int parameter to get it to listen on 127.0.0.1 as well.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Larry Rosenman http://www.lerctr.org/~ler
> > > > > > > Phone: +1 214-642-9640 E-Mail: larryrtx at gmail.com
> > > > > > > US Mail: 5708 Sabbia Drive, Round Rock, TX 78665-2106
> > > > > > >
> > > > > > > On 7/11/18, 5:38 PM, "Teno Deuter" <gvgter at googlemail.com> wrote:
> > > > > > >
> > > > > > > shows the static IP address of the box. You mean to put that address
> > > > > > > in the config file?
> > > > > > >
> > > > > > > On Thu, Jul 12, 2018 at 12:36 AM, Larry Rosenman <larryrtx at gmail.com> wrote:
> > > > > > > > What does ifconfig nfe0 show for inet?
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Larry Rosenman http://www.lerctr.org/~ler
> > > > > > > > Phone: +1 214-642-9640 E-Mail: larryrtx at gmail.com
> > > > > > > > US Mail: 5708 Sabbia Drive, Round Rock, TX 78665-2106
> > > > > > > >
> > > > > > > > On 7/11/18, 5:35 PM, "Teno Deuter" <gvgter at googlemail.com> wrote:
> > > > > > > >
> > > > > > > > but:
> > > > > > > >
> > > > > > > > egress_int="nfe0"
> > > > > > > >
> > > > > > > > you mean to put this value?
> > > > > > > >
> > > > > > > > On Thu, Jul 12, 2018 at 12:30 AM, Larry Rosenman <larryrtx at gmail.com> wrote:
> > > > > > > > > $egress_int is NOT 127.0.0.1.
> > > > > > > > >
> > > > > > > > > Change roundcube to use the same address.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Larry Rosenman http://www.lerctr.org/~ler
> > > > > > > > > Phone: +1 214-642-9640 E-Mail: larryrtx at gmail.com
> > > > > > > > > US Mail: 5708 Sabbia Drive, Round Rock, TX 78665-2106
> > > > > > > > >
> > > > > > > > > On 7/11/18, 5:26 PM, "Teno Deuter" <gvgter at googlemail.com> wrote:
> > > > > > > > >
> > > > > > > > > this is what I have now in my smptd conf file:
> > > > > > > > >
> > > > > > > > > listen on $egress_int pki server.pki tls-require hostname [domain]
> > > > > > > > > listen on $egress_int pki server.pki port 587 tls-require auth hostname [domain]
> > > > > > > > > listen on $egress_int pki server.pki smtps auth hostname [domain]
> > > > > > > > >
> > > > > > > > > but the problem is still there :(
> > > > > > > > >
> > > > > > > > > On Thu, Jul 12, 2018 at 12:04 AM, Larry Rosenman <larryrtx at gmail.com> wrote:
> > > > > > > > > > ---
> > > > > > > > > > /etc/smtpd/smtpd.conf
> > > > > > > > > > pki mx.domain.tld certificate "/etc/smtpd/tls/smtpd.crt"
> > > > > > > > > > pki mx.domain.tld key "/etc/smtpd/tls/smtpd.key"
> > > > > > > > > >
> > > > > > > > > > table creds "/etc/smtpd/creds"
> > > > > > > > > > table vdoms "/etc/smtpd/vdoms"
> > > > > > > > > > table vusers "/etc/smtpd/vusers"
> > > > > > > > > >
> > > > > > > > > > listen on eth0 tls pki mx.domain.tld
> > > > > > > > > > listen on eth0 port 587 tls-require pki mx.domain.tld auth <creds>
> > > > > > > > > >
> > > > > > > > > > accept from any for domain <vdoms> virtual <vusers> deliver to mbox
> > > > > > > > > > accept for any relay
> > > > > > > > > > ----
> > > > > > > > > > Add a:
> > > > > > > > > > listen on lo port 587 tls-require pki mx.domain.tld auth <creds>
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > Larry Rosenman http://www.lerctr.org/~ler
> > > > > > > > > > Phone: +1 214-642-9640 E-Mail: larryrtx at gmail.com
> > > > > > > > > > US Mail: 5708 Sabbia Drive, Round Rock, TX 78665-2106
> > > > > > > > > >
> > > > > > > > > > On 7/11/18, 5:00 PM, "dovecot on behalf of Teno Deuter" <dovecot-bounces at dovecot.org on behalf of gvgter at googlemail.com> wrote:
> > > > > > > > > >
> > > > > > > > > > produces an empty result!
> > > > > > > > > >
> > > > > > > > > > On Wed, Jul 11, 2018 at 11:57 PM, Richard
> > > > > > > > > > <inbound-dovecot at listmail.innovate.net> wrote:
> > > > > > > > > > > what does the output of:
> > > > > > > > > > >
> > > > > > > > > > > netstat -n | grep :587
> > > > > > > > > > >
> > > > > > > > > > > run as root, show you? the -p will give the program and pid.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >> Date: Wednesday, July 11, 2018 21:51:09 +0000
> > > > > > > > > > >> From: Larry Rosenman <larryrtx at gmail.com>
> > > > > > > > > > >>
> > > > > > > > > > >> Yep, you (probably) need to configure openSMTPD to listen on 587
> > > > > > > > > > >>
> > > > > > > > > > >> (I run exim, so I can't help with that).
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
More information about the dovecot
mailing list