dovecot 2.3.5 - tests fail: http payload echo (ssl)

[Helmut K. C. Tessarek]

Thank you very much for getting back to me.

On 2019-03-07 04:23, Stephan Bosch via dovecot wrote:
>> http payload echo (ssl): sequential .................................. : ok
>> http payload echo (ssl): pipeline .................................... : ok
>> http payload echo (ssl): parallel .................................... :
>> FAILED: Test is hanging
>> http payload echo (ssl) .............................................. : FAILED
>> http payload echo (ssl; unknown size): sequential .................... : ok
>> http payload echo (ssl; unknown size): pipeline ...................... : ok
>> http payload echo (ssl; unknown size): parallel ...................... :
>> FAILED: Test is hanging
>> http payload echo (ssl; unknown size) ................................ : FAILED
>> 4 / 114 tests failed
>> Failed to run: ./test-http-payload
>>
>> The tests ran fine for 2.3.4.1. Is there any way, to debug the issue any
>> further? Do the tests write log files?
>>
>> It just doesn't make amy sense. Nothing has changed on the OS since I compiled
>> and tested 2.3.4.1.
> 
> SSL tests were added here for 2.3.5. Is the test taking a very long time? 

No, they don't take very long.

> Is this a very slow system?

Define 'very slow`.

$ cat /proc/cpuinfo

 [6/6]
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 16
model           : 6
model name      : AMD Turion(tm) II Neo N40L Dual-Core Processor
stepping        : 3
microcode       : 0x10000c8
cpu MHz         : 800.000
cache size      : 1024 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
apicid          : 0
initial apicid  : 0

                                    fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb
rdtscp lm 3dnowext 3dnow constant_tsc
rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm
cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs
skinit wdt nodeid_msr hw_pstate npt lbrv sv
m_lock nrip_save
bogomips        : 2995.08
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor       : 1
vendor_id       : AuthenticAMD
cpu family      : 16
model           : 6
model name      : AMD Turion(tm) II Neo N40L Dual-Core Processor
stepping        : 3
microcode       : 0x10000c8
cpu MHz         : 800.000
cache size      : 1024 KB
physical id     : 0
siblings        : 2
core id         : 1
cpu cores       : 2
apicid          : 1
initial apicid  : 1

                                    fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb
rdtscp lm 3dnowext 3dnow constant_tsc
rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm
cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs
skinit wdt nodeid_msr hw_pstate npt lbrv sv
m_lock nrip_save
bogomips        : 2995.08
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

> Does this work?:
> 
> NOVALGRIND=yes make -C src/lib-http check

Yes, no errors.

> Can you make a log of the output of src/lib-http/test-http-payload -D? 

Hmm, you could have mentioned that the debug output goes to stderr and not
stdout. No errors with that either. If you still need a log, please let me know.

> If that
> doesn't fail for some reason, can you run it within valgrind?

I ran the following command:

valgrind --log-file=valgrind_test-http-payload.out
src/lib-http/test-http-payload -D

But I guess the valgrind.log itself is useless to you, and the debug output is
printed to the terminal, so I kindliy ask you to be a bit more specific. What
exact output do you need or better yet, which command do you want me to run.

Cheers,
  K. C.


-- 
regards Helmut K. C. Tessarek              KeyID 0x172380A011EF4944
Key fingerprint = 8A55 70C1 BD85 D34E ADBC 386C 1723 80A0 11EF 4944

/*
   Thou shalt not follow the NULL pointer for chaos and madness
   await thee at its end.
*/

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <https://dovecot.org/pipermail/dovecot/attachments/20190307/8829c277/attachment.sig>