Public NameSpace using sdbox with INDEXPVT for per-user-seen flags does not take into account the dovecot-shared file flag
Panayiotis Fafakos
pfaf at wisdomsoftware.net
Mon Mar 29 09:06:10 EEST 2021
Thank you Aki, for your quick response.
*dovecot-shared* file flag should actually enable the *INDEXPVT *setting
in the NameSpace for each mailbox it has been created in, as it did for
INDEX setting.
Below folows the output of the `dovecot -n` command:
---------------------------------------------------------------------------------
auth_mechanisms = plain login
disable_plaintext_auth = no
imap_capability = +SPECIAL-USE XLIST
listen = *,[::]
lmtp_rcpt_check_quota = yes
log_timestamp = "%Y-%m-%d %H:%M:%S "
mail_attachment_dir = /ZSAFEMAIL/ATTACHED/attached
mail_attachment_min_size = 64 k
mail_max_userip_connections = 100
mail_plugins = quota acl
mail_privileged_group = vmail
namespace {
inbox = no
list = yes
location =
sdbox:/var/vmail/PublicFolders:LAYOUT=fs:DIRNAME=dbox-MailFolder:INDEXPVT=~/Maildir/public
prefix = PublicFolders/
separator = /
subscriptions = no
type = public
}
namespace inbox {
inbox = yes
location =
mailbox Drafts {
special_use = \Drafts
}
mailbox Junk {
special_use = \Junk
}
mailbox Sent {
special_use = \Sent
}
mailbox "Sent Messages" {
special_use = \Sent
}
mailbox Trash {
special_use = \Trash
}
prefix =
separator = /
subscriptions = yes
type = private
}
passdb {
args = /etc/dovecot/dovecot-sql-master.conf.ext
driver = sql
master = yes
pass = yes
}
passdb {
args = /etc/dovecot/dovecot-sql.conf
driver = sql
}
plugin {
acl = vfile
quota = dict:user::file:/var/vmail/%d/%n/.quotausage
quota_status_nouser = DUNNO
quota_status_overquota = 552 5.2.2 Mailbox is full
quota_status_success = DUNNO
sieve = /var/vmail/%d/%n/.sieve
sieve_after = /var/vmail/%d/%n/.ispconfig.sieve
sieve_before = /var/vmail/%d/%n/.ispconfig-before.sieve
sieve_max_actions = 100
sieve_max_redirects = 25
sieve_max_script_size = 2M
}
protocols = imap pop3 lmtp
service auth {
unix_listener /var/spool/postfix/private/auth {
group = postfix
mode = 0660
user = postfix
}
unix_listener auth-userdb {
group = vmail
mode = 0600
user = vmail
}
user = root
}
service imap-login {
client_limit = 1000
process_limit = 512
}
service lmtp {
unix_listener /var/spool/postfix/private/dovecot-lmtp {
group = postfix
mode = 0600
user = postfix
}
}
service quota-status {
client_limit = 1
executable = quota-status -p postfix
unix_listener /var/spool/postfix/private/quota-status {
group = postfix
mode = 0660
user = postfix
}
}
service stats {
unix_listener stats-reader {
group = vmail
mode = 0660
user = vmail
}
unix_listener stats-writer {
group = vmail
mode = 0660
user = vmail
}
}
ssl_cert = </etc/postfix/smtpd.cert
ssl_cipher_list =
ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384
ssl_dh = # hidden, use -P to show it
ssl_key = # hidden, use -P to show it
ssl_min_protocol = TLSv1.2
userdb {
driver = prefetch
}
userdb {
args = /etc/dovecot/dovecot-sql.conf
driver = sql
override_fields = master_user=%u
}
protocol imap {
auth_verbose = yes
mail_plugins = quota imap_quota acl
}
protocol pop3 {
auth_verbose = yes
mail_plugins = quota
pop3_uidl_format = %08Xu%08Xv
}
protocol lda {
mail_plugins = sieve quota
postmaster_address = postmaster at ...
}
protocol lmtp {
mail_plugins = quota sieve
postmaster_address = postmaster at ...
}
----------------------------------------------------------------------------------
Is it a bug of some kind?
Thank you,
Panos.
On 29/3/2021 08:43, Aki Tuomi wrote:
>> On 29/03/2021 02:28 Panayiotis Fafakos <pfaf at wisdomsoftware.net> wrote:
>>
>>
>> Dear Timo,
>>
>> we have successfully used dovecot-shared file flag in MaildirPublicNameSpaces with private index files, to have per-user-seen flags for some but not all mailboxesunder public folders.
>> This was actually done on older dovecot versions (i.e dovecot v2.2.33.2) , using a location setting in dovecot.conf like:
>> location = maildir:/var/vmail/PublicFolders:LAYOUT=fs:DIRNAME=privDirMailFolder:INDEX=~/Maildir/public
>>
>> We try to use similar location setting using sdbox storage in dovecot v2.3.4.1, like below:
>> location = sdbox:/var/vmail/PublicFolders:LAYOUT=fs:DIRNAME=dbox-MailFolder:INDEXPVT=~/Maildir/public
>> but the dovecot-sharedfile flag seems to be ignored.
>> As a result all mailboxes under public folders use the per-user-seen flags setting as set in the location setting, regardless of the existence of the dovecot-shared file flag or not.
>>
>> Is there any setting to use so that only some mailboxes under public folders use per-user-seen flags?
>>
>> Thank you in advance for your support,
>>
>> Panos Fafakos.
>>
>>
> Hi Panos,
>
> INDEXPVT is a namespace level setting, not per-folder setting. I cannot see any "dovecot-sharedfile" flag, maybe provide `doveconf -n`?
>
> Aki
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://dovecot.org/pipermail/dovecot/attachments/20210329/4bcf753d/attachment-0001.html>
More information about the dovecot
mailing list