diff -bruN dovecot-1.0.13/Makefile dovecot/Makefile
--- dovecot-1.0.13/Makefile	2008-04-01 14:41:12.000000000 +0200
+++ dovecot/Makefile	2008-04-01 14:29:33.000000000 +0200
@@ -7,9 +7,9 @@
 #
 
 PORTNAME=	dovecot
-DISTVERSION=	1.0.13
+DISTVERSION=	1.1.rc3
 CATEGORIES=	mail ipv6
-MASTER_SITES=	http://www.dovecot.org/releases/1.0/
+MASTER_SITES=	http://www.dovecot.org/releases/1.1/rc/
 
 MAINTAINER=	robin@isometry.net
 COMMENT=	Secure and compact IMAP and POP3 servers
diff -bruN dovecot-1.0.13/distinfo dovecot/distinfo
--- dovecot-1.0.13/distinfo	2008-04-01 14:41:12.000000000 +0200
+++ dovecot/distinfo	2008-04-01 14:43:56.000000000 +0200
@@ -1,3 +1,3 @@
-MD5 (dovecot-1.0.13.tar.gz) = 281bd9dee8d6c1674977257acc80ce64
-SHA256 (dovecot-1.0.13.tar.gz) = 16da29b2bc08d0178a09323bf0787a2a0e953075655566a7b4b6b148c87ac25f
-SIZE (dovecot-1.0.13.tar.gz) = 1774025
+MD5 (dovecot-1.1.rc3.tar.gz) = eed10a2f5142ebdf88276c0a82f548e1
+SHA256 (dovecot-1.1.rc3.tar.gz) = 5a72318a6f4d12a1da7104de94b439a8523142c0f54af1f1ff64966820ef9460
+SIZE (dovecot-1.1.rc3.tar.gz) = 2222329
diff -bruN dovecot-1.0.13/files/patch-dovecot-example.conf dovecot/files/patch-dovecot-example.conf
--- dovecot-1.0.13/files/patch-dovecot-example.conf	2008-04-01 14:41:12.000000000 +0200
+++ dovecot/files/patch-dovecot-example.conf	2008-04-01 14:38:52.000000000 +0200
@@ -1,5 +1,5 @@
---- dovecot-example.conf.orig	2008-03-04 05:48:12.000000000 +0000
-+++ dovecot-example.conf	2008-03-05 22:49:08.554336095 +0000
+--- dovecot-example.conf.orig	2008-04-01 14:30:50.000000000 +0200
++++ dovecot-example.conf	2008-04-01 14:38:28.000000000 +0200
 @@ -12,7 +12,7 @@
  # Default values are shown for each setting, it's not required to uncomment
  # any of the lines. Exception to this are paths, they're just examples with
@@ -15,9 +15,9 @@
  #protocols = imap imaps
 +protocols = %%PROTOCOLS%%
  
- # IP or host address where to listen in for connections. It's not currently
- # possible to specify multiple addresses. "*" listens in all IPv4 interfaces.
-@@ -210,6 +212,7 @@
+ # A space separated list of IP or host addresses where to listen in for
+ # connections. "*" listens in all IPv4 interfaces. "[::]" listens in all IPv6
+@@ -213,6 +214,7 @@
  # <doc/wiki/MailLocation.txt>
  #
  #mail_location = 
@@ -25,7 +25,7 @@
  
  # If you need to set multiple mailbox locations or want to change default
  # namespace settings, you can do it by defining namespace sections.
-@@ -256,6 +259,7 @@
+@@ -273,6 +275,7 @@
  # used only for creating mbox dotlock files when creation fails for INBOX.
  # Typically this is set to "mail" to give access to /var/mail.
  #mail_privileged_group =
@@ -33,7 +33,7 @@
  
  # Grant access to these supplementary groups for mail processes. Typically
  # these are used to set up access to shared mailboxes. Note that it may be
-@@ -320,6 +324,7 @@
+@@ -339,6 +342,7 @@
  # IP address. Useful for seeing who are actually using the IMAP processes
  # (eg. shared mailboxes or if same uid is used for multiple accounts).
  #verbose_proctitle = no
@@ -41,7 +41,7 @@
  
  # Valid UID range for users, defaults to 500 and above. This is mostly
  # to make sure that users can't log in as daemons or other system users.
-@@ -333,6 +338,7 @@
+@@ -352,6 +356,7 @@
  # belongs to supplementary groups with non-valid GIDs, those groups are
  # not set.
  #first_valid_gid = 1
@@ -49,7 +49,7 @@
  #last_valid_gid = 0
  
  # Maximum number of running mail processes. When this limit is reached,
-@@ -506,19 +512,19 @@
+@@ -501,19 +506,19 @@
  
  protocol imap {
    # Login executable location.
@@ -73,7 +73,7 @@
  
    # Maximum IMAP command line length in bytes. Some clients generate very long
    # command lines with huge mailboxes, so you may need to raise this if you get
-@@ -528,7 +534,7 @@
+@@ -527,7 +532,7 @@
    # Support for dynamically loadable plugins. mail_plugins is a space separated
    # list of plugins to load.
    #mail_plugins = 
@@ -82,15 +82,15 @@
  
    # Send IMAP capabilities in greeting message. This makes it unnecessary for
    # clients to request it with CAPABILITY command, so it saves one round-trip.
-@@ -563,6 +569,7 @@
+@@ -562,6 +567,7 @@
    #     accept '/' suffix in mailbox names in subscriptions list.
    # The list is space-separated.
-   #imap_client_workarounds = outlook-idle
-+  imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep
+   #imap_client_workarounds = 
++  imap_client_workarounds = delay-newmail netscape-eoh tb-extra-mailbox-sep
  }
    
  ##
-@@ -571,11 +578,11 @@
+@@ -570,11 +576,11 @@
  
  protocol pop3 {
    # Login executable location.
@@ -104,15 +104,7 @@
  
    # Don't try to set mails non-recent or seen with POP3 sessions. This is
    # mostly intended to reduce disk I/O. With maildir it doesn't move files
-@@ -621,6 +628,7 @@
-   # installations.
-   #
-   #pop3_uidl_format = 
-+  pop3_uidl_format = %08Xu%08Xv
- 
-   # POP3 logout format string:
-   #  %t - number of TOP commands
-@@ -635,7 +643,7 @@
+@@ -634,7 +640,7 @@
    # Support for dynamically loadable plugins. mail_plugins is a space separated
    # list of plugins to load.
    #mail_plugins = 
@@ -121,7 +113,7 @@
  
    # Workarounds for various client bugs:
    #   outlook-no-nuls:
-@@ -646,6 +654,7 @@
+@@ -645,6 +651,7 @@
    #     missing. This option simply sends it if it's missing.
    # The list is space-separated.
    #pop3_client_workarounds = 
@@ -129,20 +121,24 @@
  }
  
  ##
-@@ -663,10 +672,11 @@
+@@ -662,7 +669,7 @@
    # Support for dynamically loadable plugins. mail_plugins is a space separated
    # list of plugins to load.
    #mail_plugins = 
 -  #mail_plugin_dir = /usr/lib/dovecot/lda
 +  #mail_plugin_dir = %%PREFIX%%/lib/dovecot/lda
  
+   # If user is over quota, return with temporary failure instead of
+   # bouncing the mail.
+@@ -677,6 +684,7 @@
+ 
    # Binary to use for sending mails.
    #sendmail_path = /usr/lib/sendmail
 +  sendmail_path = /usr/sbin/sendmail
  
-   # UNIX socket path to master authentication server to find users.
-   #auth_socket_path = /var/run/dovecot/auth-master
-@@ -677,7 +687,7 @@
+   # Human readable error message for rejection mails. Use can use variables:
+   #  %n = CRLF, %r = reason, %s = subject, %t = recipient
+@@ -691,7 +699,7 @@
  ##
  
  # Executable location
@@ -151,7 +147,7 @@
  
  # Set max. process size in megabytes.
  #auth_process_size = 256
-@@ -783,7 +793,7 @@
+@@ -814,7 +822,7 @@
  
    #passdb passwd-file {
      # File contains a list of usernames, one per line
@@ -160,7 +156,7 @@
      #deny = yes
    #}
  
-@@ -1021,7 +1031,7 @@
+@@ -1051,7 +1059,7 @@
  # referenced using URIs in format "proxy:<name>".
  
  dict {
@@ -169,21 +165,29 @@
  }
  
  ##
-@@ -1045,7 +1055,7 @@
-   # directory. You can also optionally give a global ACL directory path where
-   # ACLs are applied to all users' mailboxes. The global ACL directory contains
-   # one file for each mailbox, eg. INBOX or sub.mailbox.
--  #acl = vfile:/etc/dovecot-acls
-+  #acl = vfile:%%PREFIX%%/etc/dovecot-acls
+@@ -1099,7 +1107,7 @@
+   # one file for each mailbox, eg. INBOX or sub.mailbox. cache_secs parameter
+   # specifies how many seconds to wait between stat()ing dovecot-acl file
+   # to see if it changed.
+-  #acl = vfile:/etc/dovecot-acls:cache_secs=300
++  #acl = vfile:%%PREFIX%%/etc/dovecot-acls:cache_secs=300
  
    # Convert plugin. If set, specifies the source storage path which is
    # converted to destination storage (mail_location) when the user logs in.
-@@ -1059,7 +1069,7 @@
+@@ -1118,14 +1126,14 @@
    # until the message can be saved within quota limits. The configuration file
    # is a text file where each line is in format: <priority> <mailbox name>
    # Mails are first deleted in lowest -> highest priority number order
 -  #trash = /etc/dovecot-trash.conf
 +  #trash = %%PREFIX%%/etc/dovecot-trash.conf
  
-   # Lazy expunge plugin. Currently works only with maildirs. When a user
-   # expunges mails, the mails are moved to a mailbox in another namespace
+   # Expire plugin. Mails are expunged from mailboxes after being there the
+   # configurable time. The first expiration date for each mailbox is stored in
+   # a dictionary so it can be quickly determined which mailboxes contain
+   # expired mails. The actual expunging is done in a nightly cronjob, which
+   # you must set up:
+-  #   dovecot --exec-mail ext /usr/libexec/dovecot/expire-tool
++  #   dovecot --exec-mail ext %%PREFIX%%/libexec/dovecot/expire-tool
+   #expire = Trash 7 Spam 30
+   #expire_dict = db:/var/lib/dovecot/expire.db
+ 

