Localhost imap server fails after upgrade from 2.2.33.2-1 to 1:2.3.2.1 (fwd)
Aki Tuomi
aki.tuomi at open-xchange.com
Mon Dec 31 22:06:31 EET 2018
Am I assuming correctly that you are not, in fact, running anything but imap process from Dovecot?
Aki
> On 31 December 2018 at 18:35 Chris BL <cpblpublic+dovecot at gmail.com> wrote:
>
>
>
> Hi Aki,
>
> Oops; I did not think carefully enough about your instructions. Here is the output from
>
> $ dovecot -n -c /home/meuser/dotfiles/auto-stanford-dovecot.conf
>
> # 2.3.2.1 (0719df592): /home/meuser/dotfiles/auto-stanford-dovecot.conf
> # Pigeonhole version 0.5.2 ()
> # OS: Linux 4.18.0-13-generic x86_64 Ubuntu 18.10 ext4
> # Hostname: cpbl-t450s
> doveconf: Warning: please set ssl_dh=</etc/dovecot/dh.pem
> doveconf: Warning: You can generate it with: dd if=/var/lib/dovecot/ssl-parameters.dat bs=1 skip=88 | openssl dhparam -inform der > /etc/dovecot/dh.pem
> mail_location = maildir:/home/meuser/imap/gmailStanford:LAYOUT=fs:INBOX=/home/meuser/imap/gmailStanford/INBOX
> service stats {
> unix_listener stats-writer {
> mode = 0666
> }
> }
> ssl_dh = # hidden, use -P to show it
> verbose_proctitle = yes
>
>
> I then followed the instructions in the Warning lines above and now I get:
>
> dovecot -n -c /home/meuser/dotfiles/auto-stanford-dovecot.conf
> # 2.3.2.1 (0719df592): /home/meuser/dotfiles/auto-stanford-dovecot.conf
> # Pigeonhole version 0.5.2 ()
> # OS: Linux 4.18.0-13-generic x86_64 Ubuntu 18.10 ext4
> # Hostname: cpbl-t450s
> mail_location = maildir:/home/meuser/imap/gmailStanford:LAYOUT=fs:INBOX=/home/meuser/imap/gmailStanford/INBOX
> service stats {
> unix_listener stats-writer {
> mode = 0666
> }
> }
> ssl_dh = # hidden, use -P to show it
> verbose_proctitle = yes
>
>
> However, this does not help my primary symptom:
>
>
> $ /usr/lib/dovecot/imap -c /home/meuser/dotfiles/auto-stanford-dovecot.conf
> imap(meuser,)Error: net_connect_unix(/var/run/dovecot/stats-writer) failed: Permission denied
> * PREAUTH [CAPABILITY IMAP4rev1 SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE
> UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS BINARY MOVE SNIPPET=FUZZY LITERAL+ NOTIFY] Logged in as meuser
>
>
> Thanks!
> Chris
>
>
>
> On Mon, Dec 31, 2018 at 10:27 AM Aki Tuomi <aki.tuomi at open-xchange.com> wrote:
> Did you remove the service section before taking doveconf -n? 'cos I can't see it here..
>
> Also, did you restart dovecot after config change?
>
> Aki
>
> > On 31 December 2018 at 16:54 Chris BL <cpblpublic+dovecot at gmail.com> wrote:
> >
> >
> > Hi Aki,
> >
> > Yes, the same connect error: imap(meuser,)Error: net_connect_unix(/var/run/dovecot/stats-writer) failed: Permission denied
> >
> > The mail location in "doveconf -n" (belo) does not reflect my preferences.
> >
> > In Alpine, if I acknowledge the error I get, which tells me to add
> > novalidate-cert in my pinerc file, it prompts me for my POSIX username and
> > password. After that, I get my /var/spool/mail inbox, which is not what I
> > want.
> >
> >
> > doveconf -n
> > # 2.3.2.1 (0719df592): /etc/dovecot/dovecot.conf
> > # Pigeonhole version 0.5.2 ()
> > # OS: Linux 4.18.0-13-generic x86_64 Ubuntu 18.10
> > # Hostname: myhost-t450s
> > mail_location = mbox:~/mail:INBOX=/var/mail/%u
> > mail_privileged_group = mail
> > namespace inbox {
> > inbox = yes
> > location =
> > mailbox Drafts {
> > special_use = \Drafts
> > }
> > mailbox Junk {
> > special_use = \Junk
> > }
> > mailbox Sent {
> > special_use = \Sent
> > }
> > mailbox "Sent Messages" {
> > special_use = \Sent
> > }
> > mailbox Trash {
> > special_use = \Trash
> > }
> > prefix =
> > }
> > passdb {
> > driver = pam
> > }
> > protocols = " imap"
> > ssl_cert = </etc/dovecot/private/dovecot.pem
> > ssl_client_ca_dir = /etc/ssl/certs
> > ssl_dh = # hidden, use -P to show it
> > ssl_key = # hidden, use -P to show it
> > userdb {
> > driver = passwd
> > }
> >
> >
> >
> > On Mon, 31 Dec 2018, Aki Tuomi wrote:
> >
> > > You are still getting the connect error?
> > >
> > > Can you share your doveconf -n?
> > >
> > > Aki
> > >
> > > > On 31 December 2018 at 16:42 cpblpublic+dovecot at gmail.com wrote:
> > > >
> > > >
> > > > Hi Aki,
> > > >
> > > > Thanks. I put that in the .conf file I mentioned, and it made no
> > > > difference.
> > > >
> > > > Chris
> > > >
> > > > > Hi!
> > > > >
> > > > > In your case it's probably easiest to change
> > > > >
> > > > > service stats {
> > > > > unix_listener stats-writer {
> > > > > mode = 0666
> > > > > }
> > > > > }
> > > > >
> > > > > Aki
> > > > >
> > > > > > On 31 December 2018 at 16:05 cpblpublic+dovecot at gmail.com wrote:
> > > > > >
> > > > > >
> > > > > >
> > > > > > I use a localhost dovecot imap server in order to access maildir folders from Alpine (see 2009 instructions for my set up here
> > > > > > https://cpbl.wordpress.com/2009/11/07/alpine-offlineimap-and-gmail-under-ubuntu/ )
> > > > > >
> > > > > > My configuration has worked nicely since 2009, but failed after a recent upgrade of dovecot (during basic upgrade from Ubuntu 18.04 to 18.10).
> > > > > >
> > > > > > The version of Alpine did not change. Uninstalling dovecot-core and dovecot-imapd, and reinstalling the older versions, fully fixes the problem.
> > > > > >
> > > > > > I would like to know how to get my configuration working with the new version of dovecot.
> > > > > >
> > > > > > Here's what the problem looks like:
> > > > > >
> > > > > > I have a file auto-dovecot.conf with only the following two lines.
> > > > > >
> > > > > > verbose_proctitle = yes
> > > > > > mail_location = maildir:/home/meuser/imap/gmailStanford:LAYOUT=fs:INBOX=/home/meuser/imap/gmailStanford/INBOX
> > > > > >
> > > > > > Other /etc/ files are unchanged from installation defaults.
> > > > > >
> > > > > > Alpine calls imapd when it starts, with the following command:
> > > > > >
> > > > > > /usr/lib/dovecot/imap -c /home/meuser/dotfiles/auto-dovecot.conf
> > > > > >
> > > > > >
> > > > > > When I run that command, I get:
> > > > > >
> > > > > > imap(meuser,)Error: net_connect_unix(/var/run/dovecot/stats-writer) failed: Permission denied
> > > > > > * PREAUTH [CAPABILITY IMAP4rev1 SASL-IR LOGIN-REFERRALS ID ENABLE IDLE
> > > > > > SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT
> > > > > > MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS
> > > > > > LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN
> > > > > > CONTEXT=SEARCH LIST-STATUS BINARY MOVE SNIPPET=FUZZY LITERAL+ NOTIFY]
> > > > > > Logged in as meuser
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > so I am guessing that the first line is the issue, since when the older version I get instead:
> > > > > >
> > > > > > * PREAUTH [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE
> > > > > > IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT
> > > > > > MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS
> > > > > > LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN
> > > > > > CONTEXT=SEARCH LIST-STATUS BINARY MOVE] Logged in as meuser
> > > > > >
> > > > > >
> > > > > > Can anyone help me? I cannot find documentation for using a localhost server for Alpine, except my own from 2009.
> > > > > >
> > > > > > Many thanks!
> > > > > >
> > > > > > Chris
> > > > >
> > >
>
More information about the dovecot
mailing list