- dovecot - dovecot.org

Re: [Dovecot] Different but probably related issue
by Johannes Berg 11 Jun '12

11 Jun '12

Hi Marc, [+list since I'm unlikely to be able to solve this problem myself] > I am trying to setup a debian testing (wheeze) mail server using > postfix, dovecot and amavisd-new with spamassassin. I have everything > working fine, using mdbox mailboxes and system users. As a final touch > for this setup, I wanted to be able to train the (global) bayes > database directly through IMAP. > > Hence, I installed your plugin (directly from the official debian > repositories) and set it up to report mails to spamassassin. I am > using the "pipe" backend to call a wrapper script, that stores the > mail into a temporary file and launches sa-learn to learn it. My tests > indicate that this is working properly. Ok, nice. > However, when the dovecot-antispam plugin is enabled, I have a weird > problem sending emails. This is, whenever my MUA tries to save the > just sent message to the "Sent" folder, dovecot shows the following > error: Hmm, ok, let's see > > --------------------------------------------------- > > Dovecot's error log: > > --------------------------------------------------- > > Jun 4 22:35:14 aiur dovecot: imap(user): Error: mdbox /home/user/.mdbox/mailboxes/Sent/dbox-Mails: map uid lost for uid 0 > > Jun 4 22:36:06 aiur dovecot: imap(user): Error: /home/user/.mdbox/mailboxes/Spam/dbox-Mails/dovecot.index reset, view is now inconsistent > > Jun 4 22:36:09 aiur dovecot: imap(user): Error: Log synchronization error at seq=8,offset=27592 for /home/user/.mdbox/storage/dovecot.map.index: Append with UID 56056, but next_uid = 56057 > > Jun 4 22:36:09 aiur dovecot: lda(user): Error: Log synchronization error at seq=8,offset=27592 for /home/user/.mdbox/storage/dovecot.map.index: Append with UID 56056, but next_uid = 56057 > > Jun 4 22:36:10 aiur dovecot: imap(user): Error: /home/user/.mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index reset, view is now inconsistent > > > As a result, the MUA hangs for a while (some minute and a half). After > that it closes the IMAP session properly, but I am left with two > copies of the sent email in the "Sent" folder: one that is marked as > unread and one that is not. Curious. I think the problem is likely the mdbox storage... There have always been some issues with it and the antispam plugin when combined. The first issue was that we couldn't access the raw text or something ... not sure what's up now. > > IMAP Conversation (as logged by roundcube webmail) > > [04-Jun-2012 22:35:14 +0200]: [4A68] C: A0005 APPEND INBOX.Sent (\Seen) {519+} > > [04-Jun-2012 22:35:14 +0200]: [4A68] C: Received: from cpe-76-169-183-245.socal.res.rr.com ([76.169.183.245]) > > by server.domain.tld > > with HTTP (HTTP/1.1 POST); Mon, 04 Jun 2012 22:35:14 +0200 > > MIME-Version: 1.0 ... > > [04-Jun-2012 22:36:10 +0200]: [4A68] S: A0005 OK [APPENDUID > 1338488996 4274] Append completed. That looks ... pretty normal. > At this point, I do not know what else to try or how to fix this > problem. Thus, I have had to disable your plugin for now. Do you have > any ideas on how to proceed? I can give you access to this machine if > need be (it's a personal server). Unfortunately, I don't. I can only suggest, as a test, trying with some other storage format -- I only use Maildir -- to see if the problem is really in the interaction with mdbox. I'm fairly sure that's likely the problem, maybe the plugin doesn't pass something through append that is needed by mdbox, but I've never even attempted to understand mdbox. Maybe Timo can comment. Timo, you can find the latest code here: http://git.sipsolutions.net/?p=dovecot-antispam.git;a=summary johannes

2 1

[Dovecot] Accessing maildir snapshots through dovecot / namespace
by Karl Oulmi 11 Jun '12

11 Jun '12

Hi, I've the following setup : - FreeBSD 9.0 / Dovecot 2.1.7 - Maildir storage over iSCSI (Dell MD3200i) - Virtual users over LDAP to render the storage snapshots available through dovecot (to allow my users to browse their mail history). Here is my conf : namespace { type = private inbox = yes list = yes prefix = INBOX. location = maildir:/home/%u/Maildir:CONTROL=/home/dovecot/control/%u:INDEX=/home/dovecot/indexes/%u } namespace snap { prefix = INBOX.snapshot.h0. hidden = no inbox = no list = yes location = maildir:/da1/%u/Maildir:INDEX=/da1/dovecot/indexes/%u:CONTROL=/da1/dovecot/control/%u type = private } The problem is that I don't see the content of the inbox folder contained in the snapshots whereas subfolders are perfectly viewed ! Inbox cur|new are is /da1/%u/Maildir/ If anyone have a tip, It would be nice... Regards, Karl. -- _______________________________________________________________ Karl OULMI Centre de Ressources Informatiques Institut de Biologie de Lille - CNRS GDS3366 _______________________________________________________________

2 1

[Dovecot] dovecot does not find libpam when compiling with customized prefix
by Roland 11 Jun '12

11 Jun '12

Hello everybody, I try to compile dovecot 2.1.7 with a customized --prefix setting and --with-pam . Although I installed libpam into the same --prefix, dovecot does not find it: checking for pam_start in -lpam... no configure: error: Can't build with PAM support: libpam not found The same or a similar problem seems to have appeared 4 years ago: http://www.dovecot.org/list/dovecot/2008-February/028750.html Which libpam file does dovecot expect in which directory? And possibly there is something wrong with the pam_start function? Thanks in advance, Roland

2 1

[Dovecot] Dovecot over NFS
by James Devine 11 Jun '12

11 Jun '12

I'm playing with running dovecot over NFS and I am running into some issues. I have followed the guide at http://wiki2.dovecot.org/NFS and my setup includes 1 nfs server and 1 client running postfix/dovecot. In testing I am running postal via the command: postal -t 10 -c 10 localhost users399 The test file has a list of 399 users to deliver to. I've provided a sample of the errors I'm receiving and my configuration below, I am running dovecot 2.0.19. Any idea what I might be doing wrong and what I might do to resolve it? My ultimate goal is to setup multiple clients with director so each user is still handled on a single machine, however with a single machine I still seem to be having issues. Here is a sample of some of the errors I'm seeing: Jun 6 15:55:12 test-gluster-client1 dovecot: lmtp(12072, testuser130): Error: mdbox /mnt/testuser130/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:12 test-gluster-client1 dovecot: lmtp(11999, testuser99): Error: Log synchronization error at seq=2,offset=556 for /mnt/testuser99/mdbox/storage/dovecot.map.index: Append with UID 2, but next_uid = 3 Jun 6 15:55:14 test-gluster-client1 dovecot: lmtp(12047, testuser41): Error: mdbox /mnt/testuser41/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:18 test-gluster-client1 dovecot: lmtp(12133, testuser138): Error: Log synchronization error at seq=2,offset=556 for /mnt/testuser138/mdbox/storage/dovecot.map.index: Append with UID 2, but next_uid = 3 Jun 6 15:55:19 test-gluster-client1 dovecot: lmtp(12076, testuser217): Error: mdbox /mnt/testuser217/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:19 test-gluster-client1 dovecot: lmtp(12047, testuser41): Error: mdbox /mnt/testuser41/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:23 test-gluster-client1 dovecot: lmtp(11985, testuser166): Error: mdbox /mnt/testuser166/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:23 test-gluster-client1 dovecot: lmtp(12072, testuser130): Error: Log synchronization error at seq=2,offset=204 for /mnt/testuser130/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index: uid_validity updated unexpectedly: 1339019655 -> 1339019656 Jun 6 15:55:23 test-gluster-client1 dovecot: lmtp(11928, testuser130): Error: Log synchronization error at seq=2,offset=204 for /mnt/testuser130/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index: uid_validity updated unexpectedly: 1339019655 -> 1339019656 Jun 6 15:55:24 test-gluster-client1 dovecot: lmtp(11954, testuser192): Error: mdbox /mnt/testuser192/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:24 test-gluster-client1 dovecot: lmtp(12130, testuser128): Error: mdbox /mnt/testuser128/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:27 test-gluster-client1 dovecot: lmtp(12076, testuser217): Error: mdbox /mnt/testuser217/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:27 test-gluster-client1 dovecot: lmtp(12211, testuser60): Error: mdbox /mnt/testuser60/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:27 test-gluster-client1 dovecot: lmtp(12112, testuser190): Error: mdbox /mnt/testuser190/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:27 test-gluster-client1 dovecot: lmtp(12047, testuser41): Error: Log synchronization error at seq=2,offset=204 for /mnt/testuser41/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index: uid_validity updated unexpectedly: 1339019658 -> 1339019659 Jun 6 15:55:27 test-gluster-client1 dovecot: lmtp(11937, testuser41): Error: Log synchronization error at seq=2,offset=204 for /mnt/testuser41/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index: uid_validity updated unexpectedly: 1339019658 -> 1339019659 Jun 6 15:55:28 test-gluster-client1 dovecot: lmtp(11985, testuser166): Error: mdbox /mnt/testuser166/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 Jun 6 15:55:30 test-gluster-client1 dovecot: lmtp(12130, testuser128): Error: mdbox /mnt/testuser128/mdbox/mailboxes/INBOX/dbox-Mails: Invalid dbox header size: 0 My dovecot config is: auth_debug = yes auth_debug_passwords = yes auth_username_format = %Ln auth_verbose = yes base_dir = /var/run/dovecot-service/ disable_plaintext_auth = no instance_name = dovecot-service mail_debug = yes mail_fsync = always mail_location = mdbox:~/mdbox mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = quota mdbox_rotate_size = 16 M mmap_disable = yes passdb { driver = pam } plugin { quota = dict:User quota::file:%h/mdbox/dovecot-quota } protocols = " imap lmtp pop3" service auth { unix_listener auth-userdb { group = postfix mode = 0666 user = postfix } } service imap-login { inet_listener imap { port = 10143 } } service lmtp { inet_listener lmtp { port = 10024 } } service pop3-login { inet_listener pop3 { port = 10110 } } ssl = no ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd }

3 4

[Dovecot] Frequently login problem
by Jitendra Bhaskar 11 Jun '12

11 Jun '12

Hi, I am using dovecot 2.1.3 on centos 5.7. It was working fine but last few days I need to restart or reload dovecot service because at that time users are not able to login. Each time I am getting information from doveco.log is as : Jun 04 11:52:54 auth: Error: BUG: Authentication client gave a PID 17564 of existing connection Jun 04 11:52:54 auth: Error: BUG: Authentication client gave a PID 17566 of existing connection Jun 04 11:52:59 auth: Error: BUG: Authentication client gave a PID 17564 of existing connection -- * Thanks & Regards * *Jitendra Kumar Bhaskar* Cell:- +91 7306311531 +91 8102997821

2 2

[Dovecot] Dovecot antispam plugin bug: got an empty message
by Petr Bravenec 10 Jun '12

10 Jun '12

It is few months ago I requested help with combination dovecot - dovecot- antispam plugin and dspam. Now I got into troubles with a lot of spam delivering to users inbox. Problem described bellow is now better hidden but stil remains: When moving a message from INBOX to Junk, dspam got an empty message. I made a wrapper about dspamc and there is no input on stdio. The dspam was not trained (got an empty message). Looking to source code of dspam and antispam plugin I suspect the dovecot not to sending any content to plugin when moving from inbox to junk. Petr Bravenec Dne Wednesday 25 of January 2012 17:19:18 Tom Hendrikx napsal(a): > On 25-01-12 08:05, Petr Bravenec wrote: > > Few weeks ago I upgraded dovecot from 1.2 to 2.0.16 and antispam plugin > > to 2.0_pre20101222. Since the upgrade I'm not able to move messages to > > my Junk folder. In the maillog I have found this message: > > > > dspam[25060]: empty message (no data received) > > Gentoo has included the antispam plugin from Johannes historically, but > added the fork by Eugene to support upgrades to dovecot 2.0. It is not > really made clear by the gentoo ebuild is that the forked plugin needs a > slightly different config. > > I use the config below with dovecot 2.0.17 and a git checkout for > dovecot-antispam: > > ===8<======== > plugin { > antispam_signature = X-DSPAM-Signature > antispam_signature_missing = move > antispam_spam_pattern_ignorecase = Junk;Junk.* > antispam_trash_pattern_ignorecase = Trash;Deleted Items;Deleted > Messages > > # Backend specific > antispam_backend = dspam > antispam_dspam_binary = /usr/bin/dspamc > antispam_dspam_args = > --user;%u;--deliver=;--source=error;--signature=%%s > antispam_dspam_spam = --class=spam > antispam_dspam_notspam = --class=innocent > #antispam_dspam_result_header = X-DSPAM-Result > } > > > -- > Regards, > Tom

2 1

[Dovecot] director userdb problem
by Костырев Александр Алексеевич 10 Jun '12

10 Jun '12

hello ! I'm trying to get users from dovecot director server: doveadm director map doveadm(root): Error: User listing returned failure doveadm(root): Error: user listing failed user mail server ip expire time <unknown> 192.168.5.101 2012-06-10 21:54:06 in logs I get: Jun 10 21:41:14 mail-lvsm dovecot: auth-worker(17510): mysql(172.5.14.1): Connected to database EXIM Jun 10 21:41:14 mail-lvsm dovecot: auth-worker(17510): Warning: mysql: Query failed, retrying: Table 'EXIM.users' doesn't exist Jun 10 21:41:14 mail-lvsm dovecot: auth-worker(17510): Error: sql: Iterate query failed: Table 'EXIM.users' doesn't exist (using built-in default iterate_query: SELECT username, domain FROM users) in my dovecot.conf I have: userdb { driver = sql args = /etc/dovecot/dovecot-sql.conf } passdb { driver = static args = proxy=y nopassword=y } and in /etc/dovecot/dovecot-sql.conf: user_query = select MBOX_NAME AS user from M_MAILBOX WHERE (MBOX_NAME = '%u'); Do I have to use special table named users ? is it hard-coded?

1 2

[Dovecot] Restoring older messages to new server?
by Voytek Eymont 10 Jun '12

10 Jun '12

I had Dovcot 1.x setup, all was working well (till...) Server got stuffed up and same Dovecot 1.x was rebuilt, put back in service, all's working well. I have recovered data from Maildirs messages from the old server, As some of the inboxes now have new messages, what is correct way to copy older messages from old server to new server ? (There are no duplicates, simply old messages from past server, data is physically on new server) Thanks for pointers, Voytek -- Swyped on my Motrix with K-9 Mail. Please excuse my brevity.

2 2

[Dovecot] Dovecot setup fails w. multiple mail locations (gnus/dovecot/offlineimap)
by Johnny 10 Jun '12

10 Jun '12

Hi, I am trying to setup a Gnus - Dovecot - Offlineimap - Webmail (Gmail / Fastmail) chain and cannot configure the correct behaviour. Any advice to get this working properly would be very appreciated! I have set up Offlineimap to synchronise two mail accounts into separate folders under ~/Maildir. After running Offlineimap, the folders look as below. Maildir/ |-- Gmail | |-- cur | |-- dovecot.index.log | |-- dovecot-uidlist | |-- dovecot-uidvalidity | |-- dovecot-uidvalidity.4fd3b80e | |-- [Gmail].All\ Mail | |-- [Gmail].Drafts | |-- [Gmail].Important | |-- [Gmail].Sent\ Mail | |-- [Gmail].Spam | |-- [Gmail].Starred | |-- [Gmail].Trash | |-- INBOX | |-- new | |-- Personal | |-- Receipts | |-- tmp | |-- Travel | `-- Work `-- Fastmail |-- cur |-- dovecot.index.log |-- dovecot.mailbox.log |-- dovecot-uidlist |-- dovecot-uidvalidity |-- dovecot-uidvalidity.4fd3b75e |-- INBOX |-- INBOX.Drafts |-- INBOX.Sent\ Items `-- INBOX.Trash The Dovecot config is below. (I have set up a blank "MailTest" directory as inbox, believing that this may preserve the two imap directories better for offlineimap synching (not sure if this is correct)). ,---- | mail_location = maildir:~/Maildir:LAYOUT=fs | | namespace inbox { | location = maildir:~/MailTest | inbox = yes | } | | namespace mygmail { | type = private | separator = . | prefix = "mygmail." | location = maildir:%h/Maildir/Gmail/:LAYOUT=fs | inbox = no | hidden = no | list = yes | subscriptions = yes | } | | namespace myfastmail { | type = private | separator = . | prefix = "myfastmail." | location = maildir:%h/Maildir/FASTMAIL/:LAYOUT=fs | inbox = no | hidden = no | list = yes | subscriptions = yes | } `---- Accessing dovecot through gnus with this setup only sees the files in the directories that are not prefixed (e.g. under Fastmail, INBOX is the only seen folder, all INBOX.subfolder are not there). Removing the prefix manually they can be seen again however (e.g. INBOX.subfolder -> subfolder). If I remove LAYOUT=fs in the dovecot config, nothing is seen at all, although the directories look like proper Maildirs! A second issue is that running Offlineimap a second time seems to work ok for gmail, but Fastmail complains that "cannot create directory '.'"? Thanks! -- Johnny Dovecot 2.1.6 Offlineimap 6.5.2.1 Ma Gnus v0.6

1 0

[Dovecot] director: backend health monitoring
by Костырев Александр Алексеевич 10 Jun '12

10 Jun '12

Hello! I am wonder if there are plans to include backend health monitoring feature to Dovecot Director ? Yes, I'm aware of poolmon by Brad Davidson but I think it's kind of must-have feature out of box. thanks

2 1

[Dovecot] Upgrading 1.2.17 -> 2.1.x
by Adam G Tilghman 10 Jun '12

10 Jun '12

We're planning to upgrade our site from 1.2.17 to 2.1.x within the next few months, but we must ensure our ability to revert to 1.2.17 if problems arise. I don't expect our maildir storage would present a problem, but am less certain about 2.1.x index/control files remaining readable under 1.2.17. Should I have any reason to worry? -- Adam Tilghman Systems Support / Academic Computing & Media Services agt(a)ucsd.edu 858-822-0711 University of California, San Diego

2 1

[Dovecot] Deliver quota-warning via director
by Daniel Parthey 10 Jun '12

10 Jun '12

Hi there, I'm using NFS with Dovecot 2.0.20 and would like to deliver a quota warning to the user using the LMTP director. I have configured quota warnings according to http://wiki2.dovecot.org/Quota/Configuration But it seems that lda delivers the mail directly to the local filesystem and is not using our lmtp director, which prevents NFS mailboxes from getting corrupted. Is there a way to tell lda to use LMTP or the director and ignore the quota while delivering the notification? Regards Daniel

2 1

[Dovecot] Dovecot 1.x on AIX -> Dovecot 2.x on Ubuntu
by root＠yuma.acns.colostate.edu 10 Jun '12

10 Jun '12

We are working on migrating Dovecot 1.2.17 running on AIX 5.3 (believe it or not!) to Dovecot 2.0.13 running on Ubuntu. We have hundreds of users mboxes we will be migrating. My question is regarding the index files. Should we remove those after the migration, but before we open it up to users so Dovecot can create new ones? I did a test migration of a single user, and Dovecot detects the architecture change and put out some panic errors, corrupt files and backtrace messages in syslog on Ubuntu. The messages are shown below. If every user is going to generate these types of errors, I'm thinking maybe it makes sense to remove all the .imap directories and let Dovecot create new clean ones. I realize that may slow things down for awhile while Dovecot is rebuilding new files. Thanks for any info. Jackie Hunt Acad Computing & Networking Srvcs Colorado State University Jun 6 13:43:02 newlamar dovecot: imap-login: Login: user=<cacti>, method=PLAIN, rip=129.82.100.64, lip=129.82.100.124, mpid=19593, TLS Jun 6 13:43:21 newlamar dovecot: imap-login: Login: user=<cacti>, method=PLAIN, rip=129.82.100.64, lip=129.82.100.124, mpid=19597, TLS Jun 6 13:43:21 newlamar dovecot: imap-login: Login: user=<cacti>, method=PLAIN, rip=129.82.100.64, lip=129.82.100.124, mpid=19600, TLS Jun 6 13:44:11 newlamar dovecot: imap(cacti): Disconnected: Logged out bytes=107/441 Jun 6 13:44:11 newlamar dovecot: imap(cacti): Disconnected: Logged out bytes=1676/2724868 Jun 6 13:44:11 newlamar dovecot: imap(cacti): Disconnected: Logged out bytes=129/759 Jun 6 13:51:49 newlamar dovecot: imap-login: Login: user=<cacti>, method=PLAIN, rip=129.82.100.64, lip=129.82.100.124, mpid=19657, TLS Jun 6 13:51:49 newlamar dovecot: imap(cacti): Error: Rebuilding index file /adhome/cacti/.imap/INBOX/dovecot.index: CPU architecture changed Jun 6 13:51:58 newlamar dovecot: imap-login: Login: user=<cacti>, method=PLAIN, rip=129.82.100.64, lip=129.82.100.124, mpid=19662, TLS Jun 6 13:51:58 newlamar dovecot: imap(cacti): Error: Corrupted transaction log file /adhome/cacti/.imap/Trash/dovecot.index.log seq 16777216: log file shrank (1428 < 6144) (sync_offset=6144) Jun 6 13:51:58 newlamar dovecot: imap(cacti): Panic: file buffer.c: line 295 (buffer_set_used_size): assertion failed: (used_size <= buf->alloc) Jun 6 13:51:58 newlamar dovecot: imap(cacti): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x374fa) [0x7f3ada59c4fa] -> /usr/lib/dovecot/libdovecot.so.0(+0x3753e) [0x7f3ada59c53e] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f3ada576837] -> /usr/lib/dovecot/libdovecot.so.0(+0x35319) [0x7f3ada59a319] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_transaction_log_file_open+0x21e) [0x7f3ada87acee] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_transaction_log_open+0xb8) [0x7f3ada877a68] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_index_open+0xe5) [0x7f3ada860e75] -> /usr/lib/dovecot/libdovecot-storage.so.0(index_storage_mailbox_open+0xbc) [0x7f3ada826eac] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x5f7fb) [0x7f3ada8417fb] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x28c4c) [0x7f3ada80ac4c] -> /usr/lib/dovecot/libdovecot-storage.so.0(index_storage_mailbox_enable+0x24) [0x7f3ada827584] -> dovecot/imap(imap_status_get+0xfd) [0x7f3adacead8d] -> doveco t/imap(cmd_status+0x182) [0x7f3adace1f92] -> dovecot/imap(+0x1105d) [0x7f3adace405d] -> dovecot/imap(+0x11135) [0x7f3adace4135] -> dovecot/imap(client_handle_input+0x125) [0x7f3adace4385] -> dovecot/imap(client_input+0x65) [0x7f3adace4c35] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x48) [0x7f3ada5a8048] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) [0x7f3ada5a90c7] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f3ada5a7fd8] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f3ada5962c3] -> dovecot/imap(main+0x2f4) [0x7f3adacdc544] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) [0x7f3ada1e530d] -> dovecot/imap(+0x95d5) [0x7f3adacdc5d5] Jun 6 13:51:59 newlamar dovecot: imap-login: Login: user=<cacti>, method=PLAIN, rip=129.82.100.64, lip=129.82.100.124, mpid=19664, TLS Jun 6 13:51:59 newlamar dovecot: imap(cacti): Error: Transaction log file /adhome/cacti/.imap/Trash/dovecot.index.log: marked corrupted Jun 6 13:51:59 newlamar dovecot: imap(cacti): Error: Rebuilding index file /adhome/cacti/.imap/Trash/dovecot.index: CPU architecture changed

3 2

[Dovecot] per user quota
by Andreas Meyer 09 Jun '12

09 Jun '12

Hello! I activated quota plugin { quota = maildir:User quota quota_rule = *:storage=1GB # 10% of 1GB = 100MB quota_rule2 = Trash:storage=+10%% } But when I want to do per user quota in the passwd-file ...vhosts/anup.de/anmeyer::userdb_mail=maildir:~/userdb_quota_rule=*:bytes=10G I get this in the logfile and can't login: Jun 08 22:25:52 imap(anmeyer(a)anup.de): Error: user anmeyer(a)anup.de: Initialization failed: Initializing mail storage from mail_location setting failed: Unknown setting: bytes Jun 08 22:25:52 imap(anmeyer(a)anup.de): Error: Invalid user settings. Refer to server log for more information. Same with 'storage' in the passwd-file. What's wrong? Andreas

2 2

[Dovecot] director and doveadm server
by Angel L. Mateo 09 Jun '12

09 Jun '12

Hi, I've been reading doc at http://wiki2.dovecot.org/Director to configure my servers. My question is regarding configuration of doveadm server. I have configured both, director and backend servers, as described in that doc, but I don't know how to run doveadm commands in director servers. doveadm is working, because I can run commands, but they are executed in local (director) server. For example: root@myotis40:/etc/dovecot/conf.d# doveadm director status mail server ip vhosts users 155.54.211.169 100 1 but doveadm who seems to be executed just in local: (backend server) root@myotis30:/etc/dovecot/conf.d# doveadm who username # proto (pids) (ips) angel.luis 2 imap (11931 11936) (155.54.67.5) (director server) root@myotis40:/etc/dovecot/conf.d# doveadm who username # proto (pids) (ips) And another question about this... what is the local config option? I haven't found it documented anywhere. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

2 1

[Dovecot] director and IPs shown at the backends
by Angel L. Mateo 09 Jun '12

09 Jun '12

Hello, I am configuring a dovecot imap/pop servers with a dovecot director in front of them. Because I am using director proxy, connections in the backends are show as coming from director IPs. Is there any way to configure director (or backends) so the backends know (and report) the original IP instead of the director IP?

3 3

[Dovecot] Corrupted mdbox on LMTP director delivery while user is logged in via IMAP
by Daniel Parthey 09 Jun '12

09 Jun '12

Hi, we get errors about corrupted indexes and we are losing flags with mdbox on NFSv4: Error: Recent flags state corrupted for mailbox Error: Corrupted dbox file Error: Corrupted transaction log file It looks like a LMTP director problem. The user has IMAP IDLE connections open and lmtp delivers to another host. This leads to nfs corruption problems. The user is logged into mail04 and has some IMAP IDLE mailbox connections open: mail04:~# ps -ef|grep someuser vmail 5217 23918 0 Jun07 ? 00:00:00 dovecot/imap [someuser(a)example.de 10.129.3.190 IDLE] vmail 8623 23918 0 Jun07 ? 00:00:00 dovecot/imap [someuser(a)example.de 10.129.3.233 IDLE] vmail 20279 23918 0 00:37 ? 00:00:00 dovecot/imap [someuser(a)example.de 10.129.3.213 IDLE] If postfix on mail01/dcmailbox01 receives an incoming mail now, the director on mail01 does NOT direct LMTP to the responsible host mail04/dcmailbox04 (10.129.3.190), but delivers it locally to mail01 (10.129.3.193), which leads to file corruption. mail01:~# doveadm -c /etc/dovecot-director/dovecot-director.conf director status someuser(a)example.de Current: not assigned Hashed: 10.129.3.193 Initial config: 10.129.3.193 mail01:~# host 10.129.3.193 193.3.129.10.in-addr.arpa domain name pointer dcmailbox01.example.net. mail01 runs the lmtp proxy and lmtp delivery, even though the user is logged in via IMAP IDLE on mail04: mail01:~# grep "^Jun 8 03:36:.*someuser@example.de" /var/log/server/dovecot.log Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124): Debug: auth input: someuser(a)example.de home=/mail/dovecot/example.de/someuser uid=501 gid=123 quota_rule=*:bytes=5000M:messages=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Effective uid=501, gid=123, home=/mail/dovecot/example.de/someuser Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Quota root: name=User quota backend=dict args=:proxy::quota Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Quota rule: root=User quota mailbox=* bytes=5242880000 messages=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Quota rule: root=User quota mailbox=Trash bytes=+104857600 messages=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Quota warning: bytes=4980736000 (95%) messages=0 reverse=no command=quota-warning 95 someuser(a)example.de Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Quota warning: bytes=4194304000 (80%) messages=0 reverse=no command=quota-warning 80 someuser(a)example.de Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: dict quota: user=someuser(a)example.de, uri=proxy::quota, noenforcing=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: fs: root=/mail/dovecot/example.de/someuser/mail, index=, control=, inbox=, alt= Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: Namespace : Using permissions from /mail/dovecot/example.de/someuser/mail: mode=0700 gid=-1 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: sieve: include: sieve_global_dir is not set; it is currently not possible to include `:global' scripts. Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: jOv8JgJX0U/0aQAA3l+BKA: sieve: using sieve path for user's script: /mail/dovecot/example.de/someuser/.dovecot.sieve Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: jOv8JgJX0U/0aQAA3l+BKA: sieve: opening script /mail/dovecot/example.de/someuser/.dovecot.sieve Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: jOv8JgJX0U/0aQAA3l+BKA: sieve: script binary /mail/dovecot/example.de/someuser/.dovecot.svbin successfully loaded Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: jOv8JgJX0U/0aQAA3l+BKA: sieve: binary save: not saving binary /mail/dovecot/example.de/someuser/.dovecot.svbin, because it is already stored Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) Debug: jOv8JgJX0U/0aQAA3l+BKA: sieve: executing script from /mail/dovecot/example.de/someuser/.dovecot.svbin Jun 8 03:36:02 10.129.3.213 dovecot: lmtp(23404): Debug: auth input: user=someuser(a)example.de proxy port=19024 host=10.129.3.193 proxy_refresh=450 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27124, someuser(a)example.de) jOv8JgJX0U/0aQAA3l+BKA: sieve: mailbox: deliver: msgid=<201206080136.q581a1Rc024891(a)iolite.ham.srv.mcs.de> from=service(a)cityline.net: stored mail into mailbox 'INBOX' Jun 8 03:36:02 10.129.3.213 dovecot: lmtp(23406): Debug: auth input: user=someuser(a)example.de proxy port=19024 host=10.129.3.193 proxy_refresh=450 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125): Debug: auth input: someuser(a)example.de home=/mail/dovecot/example.de/someuser uid=501 gid=123 quota_rule=*:bytes=5000M:messages=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Effective uid=501, gid=123, home=/mail/dovecot/example.de/someuser Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Quota root: name=User quota backend=dict args=:proxy::quota Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Quota rule: root=User quota mailbox=* bytes=5242880000 messages=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Quota rule: root=User quota mailbox=Trash bytes=+104857600 messages=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Quota warning: bytes=4980736000 (95%) messages=0 reverse=no command=quota-warning 95 someuser(a)example.de Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Quota warning: bytes=4194304000 (80%) messages=0 reverse=no command=quota-warning 80 someuser(a)example.de Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: dict quota: user=someuser(a)example.de, uri=proxy::quota, noenforcing=0 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: fs: root=/mail/dovecot/example.de/someuser/mail, index=, control=, inbox=, alt= Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: Namespace : Using permissions from /mail/dovecot/example.de/someuser/mail: mode=0700 gid=-1 Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: sieve: include: sieve_global_dir is not set; it is currently not possible to include `:global' scripts. Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: gWijMAJX0U/1aQAA3l+BKA: sieve: using sieve path for user's script: /mail/dovecot/example.de/someuser/.dovecot.sieve Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: gWijMAJX0U/1aQAA3l+BKA: sieve: opening script /mail/dovecot/example.de/someuser/.dovecot.sieve Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: gWijMAJX0U/1aQAA3l+BKA: sieve: script binary /mail/dovecot/example.de/someuser/.dovecot.svbin successfully loaded Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: gWijMAJX0U/1aQAA3l+BKA: sieve: binary save: not saving binary /mail/dovecot/example.de/someuser/.dovecot.svbin, because it is already stored Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) Debug: gWijMAJX0U/1aQAA3l+BKA: sieve: executing script from /mail/dovecot/example.de/someuser/.dovecot.svbin Jun 8 03:36:02 10.129.3.233 dovecot: lmtp(27125, someuser(a)example.de) gWijMAJX0U/1aQAA3l+BKA: sieve: mailbox: deliver: msgid=<201206080136.q581a1t0024890(a)iolite.ham.srv.mcs.de> from=service(a)cityline.net: stored mail into mailbox 'INBOX' The "user logged on via IMAP on mail04" and "lmtp delivery on mail01" seems to lead to corruption of mdbox indexes: Jun 8 03:36:03 10.129.3.200 dovecot: mailbox: mail: imap(someuser(a)example.de): Error: Corrupted transaction log file /mail/dovecot/example.de/someuser/mail/mailboxes/INBOX/dbox- Mails/dovecot.index.log seq 82: Invalid transaction log size (32856 vs 32824): /mail/dovecot/example.de/someuser/mail/mailboxes/INBOX/dbox-Mails/dovecot.index.log (sync_offset=32856) Jun 8 03:36:03 10.129.3.200 dovecot: mailbox: mail: imap(someuser(a)example.de): Error: Index /mail/dovecot/example.de/someuser/mail/mailboxes/INBOX/dbox-Mails/dovecot.index: Lost log for seq=82 offset=32856 Jun 8 03:36:03 10.129.3.200 dovecot: mailbox: mail: imap(someuser(a)example.de): Warning: fscking index file /mail/dovecot/example.de/someuser/mail/mailboxes/INBOX/dbox-Mails/dovecot.index Jun 8 03:36:03 10.129.3.200 dovecot: mailbox: mail: imap(someuser(a)example.de): Error: Fixed index file /mail/dovecot/example.de/someuser/mail/mailboxes/INBOX/dbox-Mails/dovecot.index: log_file_seq 82 -> 83 Jun 8 03:36:38 10.129.3.200 dovecot: mailbox: mail: imap(someuser(a)example.de): Error: Transaction log file /mail/dovecot/example.de/someuser/mail/mailboxes/INBOX/dbox-Mails/dovecot.index.log.2: marked corrupted How to enable the LMTP director to deliver to the correct mailbox host? Configuration of mailbox and director of mail01 is attached. Regards, Daniel

1 1

[Dovecot] ntlm_auth in Dovecot
by Leonardo 09 Jun '12

09 Jun '12

Hi, I'm trying getting NTLM auth working against AD in my Dovecot 2.0.15. I'm getting the following error: Jun 08 14:18:11 auth: Info: winbind(?,10.44.3.151): user not authenticated: NT_STATUS_UNSUCCESSFUL "wbinfo -u" reports all the users of the domain and "ntlm_auth --username=%name% --domain="%domain%" gets authenticated successfully. Debugging winbind I can see the following error: [2012/06/08 14:18:11.129611, 10] winbindd/winbindd.c:651(process_request) process_request: unknown request fn number 14 [2012/06/08 14:18:11.129671, 10] winbindd/winbindd.c:738(winbind_client_response_written) winbind_client_response_written[2822:unknown request]: delivered response to client My dovecot.conf is the following: auth_mechanisms = plain ntlm login auth_username_format = %n auth_verbose = yes auth_winbind_helper_path = /usr/bin/ntlm_auth auth_use_winbind = yes auth_debug = yes disable_plaintext_auth = no info_log_path = /var/log/dovecot-info.log log_path = /var/log/dovecot.log mail_location = maildir:/var/mail/domains/%d/%n plugin { autocreate = Trash autocreate2 = Spam autocreate3 = Sent autosubscribe = Trash autosubscribe2 = Spam autosubscribe3 = Sent } protocols = imap ssl = no userdb { driver = static args = uid=100 gid=101 home=/var/mail/domains/%d/%n first_valid_uid=100 } passdb ldap { driver = ldap args = /etc/dovecot/dovecot-ldap.conf } protocol imap { mail_plugins = autocreate } Sounds like there is an issue when Dovecot runs "ntlm_auth". It doesn't appear to be a permission issue (perms are 755). Any help is appreciated. Thank you in advance. -- leonardo.

1 2

[Dovecot] [ Re: best practises for mail systems]
by Michescu Andrei 09 Jun '12

09 Jun '12

Hello, If disk space and bandwidth are affordable (and from your setup it seems that they are affordable as you have everything locally) I would split the mail storage completely and use replication in between n-master servers (n=2 for your case). The replication is not yet fully tested, but Timo is actively working on this feature. The fear of lossing the imap session does not make sense (at least to me) as the client will reconnect automatically in the background. Like this you have no SPOF and no split-brain and you get the flexibility (if needed) to geographically distribute your servers in the the future. Keep each server with its own ip, connect to them via DNS (round robin etc etc). We are currently experimenting with a setup similar to this one, but with geographically distributed servers (trans-continental) (bandwidth limited and high cost). Best regards, Andrei > We once try to use similar solution as your first. > > 3 servers for LVS -HA > > This master server redirect users for 2 or 3 dovecot backends.. > > The mail storage were maildir ontop of OCFS2 > > Our problem were that OCFS2 were too slow. We could not handle many users. > > So we took an step back and now use only user one server. > > But still thinking in go back to the first one. with LVS > > When using LVS try to sticky user to the same backend, LVs can do ths by > source ip. > > Where i work we have problens on testign storage. If you have any advices > for testing disk performance, i will be thankfull. > > I wil be glad to answer anything else. > > []'sf.rique > > > On Tue, Jun 5, 2012 at 9:59 AM, ëÏÓÔÙÒÅ× áÌÅËÓÁÎÄÒ áÌÅËÓÅÅ×ÉÞ < > a.kostyrev(a)serverc.ru> wrote: > >> I think LVS is just fine and it is not a SPOF 'cause it is actually 2 >> servers: >> active master --> and standby slave. >> LVS supports real time replication of connections from master to slave, >> so if master dies slave knows which IP was connected to which dovecot >> server. >> >> I'm more worried about right design of mailstorage.. should I use some >> cluster fs with all mail of all users >> or should I split mailstorage across servers and somehow avoid long >> downtime if one of servers goes down. >> >> >> -----Original Message----- >> From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] >> On >> Behalf Of Matthias-Christian Ott >> Sent: Tuesday, June 05, 2012 11:28 PM >> To: dovecot(a)dovecot.org >> Subject: Re: [Dovecot] best practises for mail systems >> >> On 2012-06-05 05:14, ëÏÓÔÙÒÅ× áÌÅËÓÁÎÄÒ áÌÅËÓÅÅ×ÉÞ wrote: >> > On each host system we created one VM and passed through 3x2TB disks >> into it. >> > >> > >> > >> > In guests vms on top of this disks we made XFS and fired up glusterfs >> with distributed replicated volumes for our mailstorage. >> > >> > so it looks like this: >> > >> > >> > >> > vm1 replicate vm2 >> > >> > disk1 ------------> disk4 >> > >> > disk2 ------------> disk5 >> > >> > disk3 ------------> disk6 >> > >> > >> > >> > in each vm we mounted glusterfs and pointed dovecot to that dir for >> mail >> creation (as ltmp) and imap4 user access. >> > >> > also we use exim as smtp. >> > >> > >> > >> > So, with glusterfs as mailstorage we can go for LVS to load balancing >> for exim and dovecot. >> > >> > so wherenever one of host systems (hence one of mail vms) goes down, >> users don't notice that >> > >> > 'cause LVS points them to working smtp and imap4 servers >> > >> > and they get their mail 'cause of glusterfs. >> > [...] >> > Cons: >> > >> > - not quite sure if glusterfs is production ready solution 'cause I've >> experienced split-brains during setting it up >> > >> > - IO performance issue. Though we didn't yet run any io tests, but >> glusterfs uses fuse to mount on clients. And guys on #gluster told me >> writing to the glusterfs mount will not be strictly local io. >> >> I'm not familiar with LVS, but from the project description it seems >> that you need a "front server" that does the load balancing, so you >> either have to run at least two of these servers in parallel or add to >> your cons that you introduced a single point of failure. But you >> mentioned that you only have two servers, so you really can do this. >> >> I would rather ensure high availability by running the two servers as >> masters and using either IP address takeover or DNS failover (with >> dynamic DNS) and either use Dovecot's replication (I haven't tested it >> yet and I'm not sure what happens in case of IP address takeover) or a >> file system that can handle these kinds of errors (e.g. Coda). You could >> do load balancing via round-robin DNS. This only protects you against >> the failure of single machine and because IMAP sessions are not >> replicated between the servers, connections will get reset if one server >> fails, but it's cost-effective and uses software that already exists. >> >> Regards, >> Matthias-Christian >> > > > !DSPAM:4fce037e104291424646138! >

4 9

[Dovecot] 2.0.X -> 2.1 pitfalls?
by Frank Elsner 09 Jun '12

09 Jun '12

Hi all, are there any pitfalls known for the migration from 2.0.18 to 2.1? Can I simply stop dovecot, make install and start again? --Frank Elsner

10 22

[Dovecot] Maildir filename has wrong S value
by Wouter de Geus 09 Jun '12

09 Jun '12

Hello folks, This morning I tried to open an old archive mail folder using Mutt. However, while fetching headers it aborted. Checking the dovecot log gave me this: @400000004fb21996267d37d4 imap(benv): Error: Cached message size smaller than expected (9115 < 9420) @400000004fb21996267e8bac imap(benv): Error: Maildir filename has wrong S value, renamed the file from /home/vpopmail/domains/benv.junerules.com/benv/Maildir/.Old.2009/cur/1260395566.28175.black,S=9115:2,S to /home/vpopmail/domains/benv.junerules.com/benv/Maildir/.Old.2009/cur/1260395566.28175.black,S=9420:2,S @400000004fb21996267e937c imap(benv): Error: Corrupted index cache file /home/vpopmail/domains/benv.junerules.com/benv/Maildir/.Old.2009/dovecot.index.cache: Broken physical size for mail UID 294 @400000004fb21996267eaaec imap(benv): Error: read(/home/vpopmail/domains/benv.junerules.com/benv/Maildir/.Old.2009/cur/1… failed: Input/output error (uid=294) @400000004fb219962680683c imap(benv): Info: Disconnected: Internal error occurred. Refer to server log for more information. [2012-05-15 10:53:32] in=6503 out=192718 I've retried opening this folder several times, but each time Dovecot only fixes 1 file and then aborts. (the folder apparently has a lot more files with incorrect sizes). My question here is: Why does dovecot abort? Isn't the issue fixed after the rename? Also: The files are not corrupted or unreadable, reading them through the commandline works fine. I've looked through my backups and saw that at least half a year ago this mismatch in size was already present. I've been running dovecot for quite a while, so the cause of this size mismatch might very well be a issue in an older version of dovecot / my configuration. Right now I'm running dovecot 2.1.6, but I've been running the v1.2 version for quite a while before that. Is this something that can be improved in dovecot so it doesn't abort after 1 rename? (of course I could script a rename operation, but that seems like a workaround to me) Thanks for reading. Wouter. My current configuration: ========================= # 2.1.6: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32.32-g3d14ce7 x86_64 Slackware 11.0.0 base_dir = /var/run/dovecot2/ disable_plaintext_auth = no first_valid_uid = 89 info_log_path = /dev/stderr last_valid_uid = 89 log_path = /dev/stderr log_timestamp = mail_debug = yes mail_location = maildir:~/Maildir mail_max_userip_connections = 50 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify e nvironment mailbox date namespace { inbox = yes location = prefix = INBOX. separator = . type = private } passdb { driver = vpopmail } plugin { autocreate = INBOX.Spam quota = maildir sieve = ~/.sieve/dovecot.sieve sieve_dir = ~/.sieve sieve_global_dir = /etc/dovecot/sieve/ sieve_subaddress_sep = -+ } protocols = imap pop3 sieve service auth { unix_listener auth-master { group = vchkpw mode = 0660 } unix_listener auth-userdb { group = vchkpw mode = 0660 } } service imap-login { inet_listener imap { address = [::] * port = 143 } inet_listener imaps { address = [::] * port = 993 } process_limit = 256 process_min_avail = 3 service_count = 1 user = dovecot } service managesieve-login { process_limit = 256 process_min_avail = 3 service_count = 1 user = dovecot } service pop3-login { inet_listener pop3 { address = [::] * port = 110 } inet_listener pop3s { address = [::] * port = 995 } process_limit = 256 process_min_avail = 3 service_count = 1 user = dovecot } ssl_cert = </var/qmail/control/servercert.pem ssl_cipher_list = ALL:!LOW ssl_key = </var/qmail/control/servercert.pem userdb { driver = vpopmail } verbose_proctitle = yes protocol lda { hostname = mail.benv.junerules.com info_log_path = /var/log/dovecot/dovecot2-deliver.log log_path = /var/log/dovecot/dovecot2-deliver-errors.log mail_plugins = sieve postmaster_address = postmaster(a)benv.junerules.com sendmail_path = /var/qmail/bin/sendmail } protocol imap { imap_max_line_length = 64 k mail_plugins = quota imap_quota autocreate } protocol pop3 { mail_plugins = quota autocreate pop3_no_flag_updates = no pop3_uidl_format = %v-%u } =================================

5 5

[Dovecot] 2.1.7 altmove not working
by Alex Crow 09 Jun '12

09 Jun '12

Hi list, I've just set up a 2.1.7 server, and have migrated a couple of accounts across from a 2.0.15 server, keeping the old configs. I have a strange problem on the new box in that altmove just doesn't work. I have my main storage under /home/email, indexes under /home/indexes and ALT under /home/email_archive. When I run the altmove command, the following broken symlink is created in /home/email/integrafin.co.uk/acrow: lrwxrwxrwx. 1 email email 54 Jun 8 10:46 dbox-alt-root -> /home/email_archive/integrafin.co.uk/a/acrow/mailboxes But nothing is created in the archive other than the empty directory: /home/email_archive/integrafin.co.uk/a/acrow. My mail_location is: mail_location = mdbox:/home/email/%d/%n:INDEX=/home/indexes/%d/%1n/%n:ALT=/home/email_archive/%d/%1n/%n This worked perfectly on the older server. I have attached my doveconf -a output. Any help much appreciated. Regards Alex

1 2

Re: [Dovecot] auth trouble
by Joseph Tam 08 Jun '12

08 Jun '12

Glenn English writes: > I'm getting a lot of what I think is a local socket asking > dovecot:auth to verify username/passwords: > >> May 31 09:00:54 server dovecot-auth: pam_unix(dovecot:auth): authentication failure; logname= uid=0 euid=0 tty=dovecot ruser=admin rhost= If dovecot-auth is getting input from a local socket, then rhost information is irrelevant since the host doing the asking is the server itself (maybe from another daemon connected to a remote host). Maybe someone is brute forcing your server's Postfix authenticated SMTP service since Postfix can be configured to use Dovecot's SASL authentication framework. Joseph Tam <jtam.home(a)gmail.com>

4 5

[Dovecot] upgrade from 1.0.5 to 2.1.7
by Andreas Meyer 08 Jun '12

08 Jun '12

Hello! I want to upgrade the docevot-installation from v 1.0.5 to 2.1..7 Now I get the following executing doveconf -n -c /etc/dovecot/dovecot.conf > /home/mail1/dovecot-2.conf doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:217: add auth_ prefix to all settings inside auth {} and remove the auth {} section completely doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:219: passdb passwd-file {} has been replaced by passdb { driver=passwd-file } doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:222: userdb passwd-file {} has been replaced by userdb { driver=passwd-file } The section at line 217 looks like this: auth default { mechanisms = plain passdb passwd-file { args = /etc/dovecot/passwd } userdb passwd-file { args = /etc/dovecot/passwd } How do I change it to fullfill the new needs? And how do I handle line 217? add auth_ prefix to all settings inside auth {} and remove the auth {} section completely ? Thanks for help! Andreas

3 14

[Dovecot] Fwd: ntlm_auth in Dovecot
by Алексей Переклад 08 Jun '12

08 Jun '12

Try to delete your server from domain and add it again by "net ads join..." > I'm trying getting NTLM auth working against AD in my Dovecot 2.0.15. > > I'm getting the following error: > > > Jun 08 14:18:11 auth: Info: winbind(?,10.44.3.151): user not > authenticated: NT_STATUS_UNSUCCESSFUL

1 0

[Dovecot] Director pop3 real ips v2.1.1
by Костырев Александр Алексеевич 08 Jun '12

08 Jun '12

good day! I'm experiencing problem with pop3 proxying: on backend servers in logs there's director's ip instead of remote's like this: Jun 8 15:21:23 host-01 dovecot: pop3-login: Login: user=<test1(a)example.com>, method=PLAIN, rip=192.168.5.102, lip=192.168.5.100, mpid=26170, secured Jun 8 15:32:16 host-01 dovecot: pop3-login: Login: user=<test1(a)example.com>, method=PLAIN, rip=192.168.5.102, lip=192.168.5.100, mpid=26426, secured -- С уважением, Костырев Александр системный администратор ЗАО "Сервер-Центр" тел.: (423) 262-02-62 (доб. 2037) факс: (423) 262-02-10 a.kostyrev(a)serverc.ru icq: 404-198-497

3 3

[Dovecot] dovecot ignores entries in virtual_alias_maps when using dovecot lda
by Marko Weber 08 Jun '12

08 Jun '12

hello list, i need help. dovecot dont look into my virtual_alias_maps . i set via postzfixadmin an alias postmaster(a)domain.tld to newmail(a)domainother.tld. when i send mails to postmaster(a)domain.tld mails are rejected. dovecot authworker tells me in log: user unknown. but i can request the data via postmap -v -q postmaster(a)domain.tld mysql:/etc/postfix/mysql_virtual_alias.cf and get result "newmail(a)domainother.tld". any ideas, hwo to get dovecot to look into my alias maps? marko

2 2

[Dovecot] Can we know when a user read our email?
by Beto Moreno 08 Jun '12

08 Jun '12

Hi. I have seen some emails servers that if I send a email to other person I can see if that person have read our emails and with a option to delete the email if the person hasn't read our email. Does dovecot have some like this feature? Thanks!!!

13 32

[Dovecot] Problems since upgrading to 2.1.6 from 2.0.20
by Trever L. Adams 08 Jun '12

08 Jun '12

Hello Everyone, I saw the text about the change and needing to define an inbox namespace. Everything seems to work fine except doveadm. I get the following from a cronjob that has worked well for years now. doveadm(account(a)example.com): Error: Syncing mailbox TRASH failed: Mailbox doesn't exist: TRASH doveadm(account(a)example.com): Error: Syncing mailbox TRASH failed: Mailbox doesn't exist: TRASH doveadm(account(a)example.com): Error: Syncing mailbox TRASH failed: Mailbox doesn't exist: TRASH The cronjob is: 1 4 * * * doveadm expunge -A mailbox TRASH SAVEDBEFORE 30D What is the problem? I have tried to find documentation and do searches for others having the same problem. I do not know if I am just missing something or what. Any help would be greatly appreciated. Thank you, Trever

1 1

[Dovecot] Postfix don't relay to dovecot virtual user
by phil25lsbin 07 Jun '12

07 Jun '12

Hi, I run a mail server on debian squeeze system , i installed the following software postfix dovecot spamassassin postgrey I configured a virtual domain and virtual mailbox but postfix don't pipe mail in dovecot. In log, it's appear that the relay mode is local and the delivery message is delivered to mailbox) Jun 7 15:23:01 ns230370 postfix/smtpd[27501]: 66BBA4D40F0: client=localhost.localdomain[127.0.0.1] Jun 7 15:23:01 ns230370 postfix/cleanup[8017]: 66BBA4D40F0: message-id=< E1Sccg1-00029S-9I(a)ns231581.ovh.net> Jun 7 15:23:01 ns230370 postfix/qmgr[27490]: 66BBA4D40F0: from=< admlb(a)lebest.fr>, size=1807, nrcpt=1 (queue active) Jun 7 15:23:01 ns230370 postfix/local[7907]: 66BBA4D40F0: to=< admlb(a)lebest.fr>, relay=local, delay=0, delays=0/0/0/0, dsn=2.0.0, status=sent (delivered to mailbox) Jun 7 15:23:01 ns230370 postfix/qmgr[27490]: 66BBA4D40F0: removed My dovecot.conf: protocols = imap imaps pop3 pop3s log_timestamp = "%Y-%m-%d %H:%M:%S " log_path = /var/log/dovecot/dovecot.log info_log_path = /var/log/dovecot/dovecot-info.log mail_privileged_group = mail disable_plaintext_auth = no mail_location = maildir:/home/smtp/%d/%n:INDEX=/home/smtp/%d/%n/indexes protocol imap { } protocol pop3 { } protocol managesieve { } protocol lda { postmaster_address = admlb(a)XXX.FR mail_plugin_dir = /usr/lib/dovecot/modules/lda auth_socket_path = /var/run/dovecot/auth-master } auth default { userdb sql { args = /etc/dovecot/dovecot-mysql.conf } passdb sql { args = /etc/dovecot/dovecot-mysql.conf } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = smtp } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } dict { } plugin { } My main.cf myhostname = smtp.XXX.FR alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = XXX.FR mydestination = XXX.FR, smtp.XXX.FR, localhost.XXX.FRr, localhost relayhost = mynetworks = 172.16.0.0/12 127.0.0.0/8 mailbox_size_limit = 0 inet_interfaces = all virtual_uid_maps = static:3000 virtual_gid_maps = static:3000 virtual_mailbox_base = /home/smtp virtual_transport = dovecot virtual_mailbox_domains = mysql:/etc/postfix/ mysql_virtual_mailbox_domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf virtual_alias_maps = mysql:/etc/postfix/mysql_virtual_alias_maps.cf relay_domains = mysql:/etc/postfix/mysql_relay_domains.cf smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unauth_destination, reject_unauth_pipelining, check_policy_service inet:127.0.0.1:10023, reject_invalid_hostname smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous content_filter = amavis:[127.0.0.1]:10024 receive_override_options = no_address_mappings inet_protocols = ipv4 The end of master.cf file dovecot unix - n n - - pipe flags=DRhu user=smtp:smtp argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} amavis unix - - - - 2 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - - - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks -o smtpd_bind_address=127.0.0.1 Thanks

3 3

[Dovecot] auth-worker problem here.
by Marko Weber 07 Jun '12

07 Jun '12

hello, in howto for gentoo i found this: To tell Postfix about the maps that you've just set up, add the following (substituting mysql for pgsql if you're on PostgreSQL) to the bottom of /etc/postfix/main.cf: virtual_alias_maps = mysql:/etc/postfix/sql_virtual_alias_maps.cf virtual_mailbox_domains = mysql:/etc/postfix/sql_virtual_domain_maps.cf virtual_mailbox_maps = mysql:/etc/postfix/sql_virtual_mailbox_maps.cf Tip: Because this is using the Dovecot's LDA, all results from virtual_mailbox_maps are ignored beyond checking if they exist. I added in the mysql db an alias postmaster(a)domainn.tld that should be forwarded to name(a)domainn.tld. The tip above tells me when using dovecot lda the virtual_alias_maps is ignored by dovecot. now when i send a mail to postmaster(a)domainn.tld the mail is not transported to name(a)domainn.tld. in logfile i see this: dovecot: auth-worker: sql(postmaster(a)zbfmail.de): Unknown user how can i tell dovecot to also use the virtual_alias_maps? thank you marko

1 0

[Dovecot] Problem with Dovecot and AD LDAP auth
by Алексей Переклад 07 Jun '12

07 Jun '12

Hi. Seems it's a bug in dovecot auth. I have FreeBSD 8.1-RELEASE-p1 and I tried 1.2.17 and 2.1.7 versions of Dovecot, and still no luck. The problem: when I set in dovecot-ldap.conf: base = CN=Users,DC=domain,DC=local everything works fine. But if I set: base = DC=domain,DC=local mail client can't authorize. /var/log/dovecot.log says: =============================================== Jun 07 18:07:17 auth: Debug: auth client connected (pid=14611) Jun 07 18:08:11 auth: Debug: client in: AUTH 1 PLAIN service=imap session=G1//aeLB6wAKAABu lip=10.0.0.3 rip=10.0.0.110 lport=143 rport=55787 resp=AGdhdGV3YXkAVU82eUpuUXQ= Jun 07 18:08:11 auth: Debug: ldap(gateway,10.0.0.110,<G1//aeLB6wAKAABu>): bind search: base=DC=domain,DC=local filter=(&(objectClass=person)(sAMAccountName=gateway)) Jun 07 18:08:11 auth: Debug: ldap(gateway,10.0.0.110,<G1//aeLB6wAKAABu>): result: uid missing Jun 07 18:10:18 imap-login: Info: Disconnected: Inactivity during authentication (disconnected while authenticating, waited 127 secs): user=<>, method=PLAIN, rip=10.0.0.110, lip=10.0.0.3, session=<G1//aeLB6wAKAABu> Jun 07 18:10:18 auth: Debug: client in: CANCEL 1 Jun 07 18:10:18 auth: Debug: auth client connected (pid=14706) Jun 07 18:10:26 auth: Debug: client in: AUTH 1 PLAIN service=imap session=n6IBcuLB7AAKAABu lip=10.0.0.3 rip=10.0.0.110 lport=143 rport=55788 resp=AGdhdGV3YXkAVU82eUpuUXQ= Jun 07 18:10:26 auth: Debug: ldap(gateway,10.0.0.110,<n6IBcuLB7AAKAABu>): bind search: base=DC=domain,DC=local filter=(&(objectClass=person)(sAMAccountName=gateway)) Jun 07 18:10:26 auth: Error: ldap(gateway,10.0.0.110,<n6IBcuLB7AAKAABu>): Connection appears to be hanging, reconnecting Jun 07 18:10:26 auth: Debug: ldap(gateway,10.0.0.110,<n6IBcuLB7AAKAABu>): result: uid missing Jun 07 18:10:26 auth: Error: ldap(gateway,10.0.0.110,<G1//aeLB6wAKAABu>): Request lost Jun 07 18:10:26 auth: Error: ldap(gateway,10.0.0.110,<n6IBcuLB7AAKAABu>): ldap_search(base=DC=domain,DC=local filter=(&(objectClass=person)(sAMAccountName=gateway))) failed: Operations error Jun 07 18:10:26 auth: Error: LDAP: Reply with unknown msgid 2 Jun 07 18:10:26 auth: Error: LDAP: Reply with unknown msgid 2 Jun 07 18:10:26 auth: Error: LDAP: Reply with unknown msgid 2 Jun 07 18:10:26 auth: Error: LDAP: Reply with unknown msgid 2 Jun 07 18:10:28 auth: Debug: client out: FAIL 1 user=gateway temp Jun 07 18:10:28 auth: Debug: client out: FAIL 1 user=gateway temp Jun 07 18:13:18 imap-login: Info: Disconnected: Inactivity (auth failed, 1 attempts in 172 secs): user=<gateway>, method=PLAIN, rip=10.0.0.110, lip=10.0.0.3, session=<n6IBcuLB7AAKAABu> ============================================ My dovecot-ldap.conf: =============================== ldap_version = 3 hosts = ad.domain.local base = DC=hrom,DC=local scope = subtree dn = CN=mailserver,CN=Users,DC=domain,DC=local dnpass = here_is_pass auth_bind = yes pass_attrs = uid=user pass_filter = "(&(objectClass=person)(sAMAccountName=%u))" user_attrs = name=mail=maildir:/var/mail/virtual/hrom.local/%n user_filter = "(&(objectClass=person)(sAMAccountName=%u))" =================================================== I need base = DC=domain,DC=local for searching for user's accounts in different OU of my AD. If I set base = CN=Users,DC=domain,DC=local, Dovecot can't authorize user accounts from OU. P.S.: Postfix with base = DC=domain,DC=local works perfectly, so the problem is not with our domain controller (LDAP server as well) .

1 0

[Dovecot] Email auto purging applied to all mail folders
by Joe V Aldeguer 07 Jun '12

07 Jun '12

Hello, Is it possible to have this done not only for spam and trash folder but lets say like the user inbox and any user created mail folders too? My ultimate goal is to have a way to automate the email deletion process of emails stored in the user inbox or mail folders when it reaches a specified date. My boss wants to force users to keep emails only a month old anything beyond that will be deleted. Has anyone done this using dovecot and are there any guides available? I am also open to suggestions for commercial solutions but so far searching online for solutions only comes up with email archiving. The dovecot version I have installed is version 2.0.19. Thanks in advance. - Joe

2 1

[Dovecot] dsync backup doubles quota
by Patrick Westenberg 07 Jun '12

07 Jun '12

Hi everyone, I recognized a very strange behavior when doing backups of my mdbox mailboxes. After the backup the quota for each mailbox is twice as much as before the backup and I have to recalculate the quota to get the former/correct information. root@mb01:~# doveadm quota get -u test(a)example.com User quota STORAGE 5 10240 User quota MESSAGE 11 - root@mb01:~# doveadm backup -u test(a)example.com mdbox:/home/example.com/test root@mb01:~# doveadm quota get -u test(a)example.com User quota STORAGE 10 10240 User quota MESSAGE 22 - root@mb01:~# doveadm quota get -u test(a)example.com root@mb01:~# doveadm quota get -u test(a)example.com User quota STORAGE 5 10240 User quota MESSAGE 11 - Is this a bug or normal behavior? Regards Patrick

2 1

[Dovecot] best practises for mail systems
by Костырев Александр Алексеевич 06 Jun '12

06 Jun '12

hello! Can someone point me to some best practices in building high-available scalable mail system or! share your own success stories. I've read article in LJ "Building a Scalable High-Availability E-Mail System with Active Directory and More" but it seemed to be outdated and there's a single point of failure (Master node). What I want to achieve: high-available, horizontaly scalable, with no single point of failure mail solution. Available hardware: intel mfsys25 modular server with 2 storage controllers, 2 switches, 4 power supply blocks with - 2 blade-servers in mfsys with: 2xIntel Xeon E5620 @ 2.40GHz with 8 cores each - promise vtrak e610s (2 storage controllers, 2 power supply blocks) - 6x 2TB SATA Hitachi HDS72302 We decided to go for KVM virtualization and glusterfs for live migration for vm image but that's not what this is all about :) We installed centos on host systems. for now while we could think of two ways to go: The first way (currently at testing stage): On each host system we created one VM and passed through 3x2TB disks into it. In guests vms on top of this disks we made XFS and fired up glusterfs with distributed replicated volumes for our mailstorage. so it looks like this: vm1 replicate vm2 disk1 ------------> disk4 disk2 ------------> disk5 disk3 ------------> disk6 in each vm we mounted glusterfs and pointed dovecot to that dir for mail creation (as ltmp) and imap4 user access. also we use exim as smtp. So, with glusterfs as mailstorage we can go for LVS to load balancing for exim and dovecot. so wherenever one of host systems (hence one of mail vms) goes down, users don't notice that 'cause LVS points them to working smtp and imap4 servers and they get their mail 'cause of glusterfs. Pros: - high-available - horizontaly scalable - with no single point of failure Cons: - not quite sure if glusterfs is production ready solution 'cause I've experienced split-brains during setting it up - IO performance issue. Though we didn't yet run any io tests, but glusterfs uses fuse to mount on clients. And guys on #gluster told me writing to the glusterfs mount will not be strictly local io. The second way: split up the users mail with: two back-end VMs each other on DIFFERENT host system with - fat mailstorage with raid1+linear mode (mdadm)+XFS - dovecot/exim-back-ends and two VMs for nginx-based proxy servers for imap4 and smtp - nginx can redirect user to right back-end through HTTP-php-based logic. Pros: - we split up not only load for exim/dovecot but users mail IOs too - no split-brains Cons: - If one of the host systems (hence one of back-end VMs with storage) goes down, half of our users is unhappy P.S. Sorry if this place is way wrong to ask for such things.

5 5

[Dovecot] No ports listening
by Marco 06 Jun '12

06 Jun '12

Please forgive my newbie post but this has me stumped. I've been a happy Dovecot 0.X and 1.X admin for years but something in my first 2.X configuration is oddly broken. It loads fine, logs no errors, but doesn't listen to any network ports! Thanks in advance for any help. Marco # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 2.6.35.14 x86_64 Ubuntu 10.10 ext4 auth_debug = yes auth_mechanisms = plain login first_valid_gid = 111 first_valid_uid = 111 login_greeting = example.com pop/imap ready mail_location = mbox:/var/mail/%u.imap:INBOX=/var/mail/%u passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/users driver = passwd-file } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { mode = 0666 } } service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 } process_limit = 50 } service pop3-login { inet_listener pop3 { address = * port = 110 } inet_listener pop3s { address = * port = 995 } process_limit = 50 } ssl_cert = </etc/ssl/mail.example.com.crt ssl_key = </etc/ssl/mail.example.com.key syslog_facility = local0 userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } valid_chroot_dirs = /var/mail verbose_proctitle = yes verbose_ssl = yes protocol lda { postmaster_address = postmaster(a)example.com }

1 0

Re: [Dovecot] dovecot-metadata-9 released
by Dennis Schridde 06 Jun '12

06 Jun '12

Hello Nick! I am sorry - I forgot to mention that you need attached patch for dovecot. Kind regards, Dennis Am Dienstag, 5. Juni 2012, 11:28:27 schrieb Nick Rosier: > Hi Dennis, > > I'm trying to compile the plugin on FreeBSD 9 with Dovecot 2.1.7 and get > the following error: > > libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I.. > -I/usr/local/include/dovecot -g -O2 -MT mailbox-ext.lo -MD -MP -MF > .deps/mailbox-ext.Tpo -c mailbox-ext.c -fPIC -DPIC -o > .libs/mailbox-ext.o mailbox-ext.c:25:19: error: missing binary operator > before token "(" > mailbox-ext.c: In function 'mailbox_get_guid_string': mailbox-ext.c:32: > error: 'MAIL_GUID_128_SIZE' undeclared (first use in this function) > mailbox-ext.c:32: error: (Each undeclared identifier is reported only > once mailbox-ext.c:32: error: for each function it appears in.) > mailbox-ext.c:33: warning: implicit declaration of function > 'mailbox_get_guid' > *** Error code 1 > Stop in /root/work/dovecot-metadata-plugin-6fe39779d758/src. *** Error > code 1 > > Removing DOVECOT_PREREQ and "forcing" to use the 2.1 definition fixes > that (I couldn't find anywhere where that macro was defined). > > Next I get another error, again caused by the DOVECOT_PREREQ: > > libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I.. > -I/usr/local/include/dovecot -g -O2 -MT imap-metadata-plugin.lo -MD -MP > -MF .deps/imap-metadata-plugin.Tpo -c imap-metadata-plugin.c -fPIC > -DPIC -o .libs/imap-metadata-plugin.o > imap-metadata-plugin.c: In function 'is_valid_rfc5464_entry_name': > imap-metadata-plugin.c:162: warning: comparison is always false due to > limited range of data type > imap-metadata-plugin.c:513:19: error: missing binary operator before > token "(" > imap-metadata-plugin.c: In function 'cmd_getmetadata': > imap-metadata-plugin.c:516: warning: passing argument 2 of > 'mail_namespace_find' from incompatible pointer type > imap-metadata-plugin.c: In function 'setmetadata_helper': > imap-metadata-plugin.c:596: warning: 'return' with a value, in function > returning void > imap-metadata-plugin.c:672:19: error: missing binary operator before > token "(" > imap-metadata-plugin.c: In function 'cmd_setmetadata': > imap-metadata-plugin.c:675: warning: passing argument 2 of > 'mail_namespace_find' from incompatible pointer type > *** Error code 1 > > Am I missing something on my system? > > Rgds, > N. > > Dennis Schridde wrote: > > Hello everyone! > > > > I just released dovecot-metadata-8, which is an implementation of RFC 5464 > > (IMAP METADATA), allowing to add comments/annotations/metadata to folders > > of an email account. > > > > 2012-06-04: Version 9 > > > > * Added Dovecot 2.1 compatibility > > * Fixed compliance with RFC 5464 Section 3.2 > > * Separated backend code into library > > * Synced code of imap-annotatemore with imap-metadata > > * Improved error messages > > * Several bugfixes (incl. segfaults) > > * Minor cleanups > > > > Please get the code from [1] and send me an email for any problem you > > find. > > > > For more information please refer to my email from Sun, 12 Jun 2011 > > 15:55:57 +0200 titled "dovecot-metadata-8 released". > > > > Kind regards, > > Dennis > > > > [1] http://hg.dovecot.org/dovecot-metadata-plugin

2 1

Re: [Dovecot] auth trouble
by Joseph Tam 06 Jun '12

06 Jun '12

Glenn English wrote: >> Maybe someone is brute forcing your server's Postfix authenticated >> SMTP service since Postfix can be configured to use Dovecot's SASL >> authentication framework. > > and for the suggestion -- I do have Postfix using Dovecot-Auth checking > for SASL. > > I think I'm going to re-install and run Tripwire... Tripwire? If the purpose of your query is to automate blocking of brute forcers, this software is not what you want (which detects tampering of critical system files). I suggest trying to find where Postfix failed login reports go, then use your fail2ban or what-have-you to detect and block hosts that repeatedly fail authentication. (First Google hit I did on this subject) http://scottlinux.com/2011/05/26/prevent-postfix-brute-force/ The log entries might look like {timestamp} {servername} postfix/smtpd[{pid}]: lost connection after AUTH from {remote-hostname}[{remote-ip}] Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] INBOX help needed, dovecot + squirrelmail
by jeep＠rahul.net 05 Jun '12

05 Jun '12

Im trying to figure out how to get dovecot to deliver to my mail_location (example: /opt/imapdata/j/jeff/INBOX/inbox) AND work with squirrelmail. Ive worked on this for hours reading the docs etc with no luck so far. I get dovecot-lda to deliver to: /opt/imapdata/j/jeff/INBOX/inbox but when I use squirrelmail, I see the following in the log: dovecot: imap(jeff): Debug: Effective uid=1006, gid=999, home=/opt/imapdata/j/jeff/INBOX/inbox dovecot: imap(jeff): Error: chdir(/opt/imapdata/j/jeff/INBOX/inbox) failed: Not a directory dovecot: imap(jeff): Debug: Namespace : type=private, prefix=INBOX/, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/opt/imapdata/j/jeff:INBOX=/opt/imapdata/j/jeff/INBOX:LAYOUT=fs:DIRNAME=mmDIR:INDEX=~/indexes It complains that 'inbox' isnt a directory, but I want it to use: /opt/imapdata/j/jeff/INBOX What parameter do I need to tweak to get this to work? Ive tried the 'folder options' in squirrelmail but that doesnt appear to have any effect here (or at least at this point in my testing). It seems that the only parameter to tweak is 'mail_location' which Im having no luck getting to work correctly. Also namespace may play a part but every combination Ive tried does not result in getting it work thus far. On a sidenote when I send more than 1 email, it doesnt seem to honor 'maildir', it seems its doing 'mbox' instead? I get one flat file. Im lost and confused. my variables: mail_location = maildir:/opt/imapdata/%1n/%n:INBOX=/opt/imapdata/%1n/%n:LAYOUT=fs:DIRNAME=mmDIR:INDEX=~/indexes namespace { type = private separator = / prefix = INBOX/ inbox = yes } Your help is appreciated! Thanks, Jeff /mf/home/jeep/shell/.signature

2 5

[Dovecot] Customization of "Rejected" message.
by Malloc Kilobyte 04 Jun '12

04 Jun '12

Helo, I'm using Dovecot 2.1.1 with Postfix 2.3.3. I've enabled the quota plugin, so that Dovecot LDA reject e-mails, when user's mailbox is out of space. By default, when mailbox is near quota, and someone tries to send huge message, a reply is automatically send to the sender. It's being send from postmaster named as Mail Delivery Subsystem. And here is my question: Is there some way to customize that auto-reply, so that it is not only being send to the sender but also to recipient gets some notice about failed attempt ? I've also noticed, that this reply has attachment, which is rejected message, but it appears to be empty. Can I configure Dovecot to send back whole rejected message ? Regards malloc4k

1 0

[Dovecot] dovecot-metadata-9 released
by Dennis Schridde 04 Jun '12

04 Jun '12

Hello everyone! I just released dovecot-metadata-8, which is an implementation of RFC 5464 (IMAP METADATA), allowing to add comments/annotations/metadata to folders of an email account. 2012-06-04: Version 9 * Added Dovecot 2.1 compatibility * Fixed compliance with RFC 5464 Section 3.2 * Separated backend code into library * Synced code of imap-annotatemore with imap-metadata * Improved error messages * Several bugfixes (incl. segfaults) * Minor cleanups Please get the code from [1] and send me an email for any problem you find. For more information please refer to my email from Sun, 12 Jun 2011 15:55:57 +0200 titled "dovecot-metadata-8 released". Kind regards, Dennis [1] http://hg.dovecot.org/dovecot-metadata-plugin

2 1

[Dovecot] Vacation stopped working
by Jacek Osiecki 04 Jun '12

04 Jun '12

Hi, I'm sure that it WAS working, but I can't guarantee... On a system with dovecot 2.0.16 and dovecot-pigeonhole-2.0_0.2.5. Today a user reported that vacation autoreponse did not work for him. As I have checked the dovecot logs, I see such a message: Jun 04 13:39:51 lmtp(9986, user(a)xxx.com) Info: ZumtCleezE8CJwAAA1GDYg: sieve: msgid=<alpine.LNX.2.00.1206041336520.11397(a)pingwin.sc>: discarding vacation response for implicitly delivered message; no known (envelope) recipient address found in message headers (recipient=<user(a)xxx.com>, and additional `:addresses' are specified) Any idea what actually went wrong? I was browsing for this error message, but found only dovecot sources :( Greetings, -- Jacek Osiecki joshua(a)ceti.pl GG:3828944 I don't want something I need. I want something I want.

1 0

Re: [Dovecot] Can we know when a user read our email?
by Richard 04 Jun '12

04 Jun '12

> Date: Sunday, June 03, 2012 02:54:32 PM -0400 > From: Jerry <jerry(a)seibercom.net> > >> On Sun, 03 Jun 2012 20:19:20 +0200 >> Reindl Harald articulated: >> >> people are mostly to stupid to realize what they >> are trying to accomplish and why it it a bad idea >> >> this is why we professionals exist and if people >> refuse what you are explaining them kiss them >> goodbye - irt will be better for you over the long > > No offense, but considering your business attitude and disdain for > potential clients and your opinion of them, it would be a far > better thing if they steered clear of you all together. There are > many considerate, intelligent, compassionate professionals out > there who would be willing to take on the difficult client. Any > "asshole" can service the routine, run of the mill, client. It > takes a true professional to work with and service a difficult > one. Something that seems to be missing from this discussion are considerations of privacy and (personal) security. There are fairly serious implications of a sender being able to tell that/when someone has downloaded/opened a message -- including discovery of daily patterns and potentially where the recipient is, or isn't. I think it is our responsibility to understand these issues and explain them to managers/clients in order to bring them along if we refuse (as I would) to provide a capability such as this. [I always set the sendmail "noreceipts" PrivacyOptions so it doesn't respond to these disposition requests.] One approach is to point out to managers/clients that if their system is configured to return read receipts, anyone sending mail to them on that system will be able to get these same types of receipts. When they think about that they may not like the implications and may reconsider their request. Just because it is technically possible to do something (and even if other vendors provide the capability) does not mean that it is the ethically or legally responsible thing to do. - Richard

2 1

[Dovecot] Exposing global (default) sieve script through Managesieve
by Matthijs Kooijman 04 Jun '12

04 Jun '12

Hi folks, I'm setting up a dovecot server with managesieve support. I'd like to offer spamfiltering through a Sieve script to my users by default, but still allow them to modify the filtering rules through Managesieve. I found the sieve_global_path configuration option, which seems perfect for what I want. I can configure a default script there, which will work for all users until they set upload their own sieve script using managesieve. However, when configured like this, the user experience isn't quite perfect. When users open the managesieve interface on their client, there is no trace of the default filters, so users might think the spamfiltering is done in some other manner. Now, when they create a filtering rule (e.g., to sort out mail to mailing lists), that rule will overwrite the default spamfiltering rule causing all the spam to spill into the user's mailbox. I'm afraid that most users won't realize they have to manually recreate the spamfiltering rule to fix this. Also, they might not know how to write the rule, even if they do... I've considered a few existing ways to fix this: - Use sieve_before / sieve_after to make sure that the default script is always executed, in addition to any user-supplied scripts. This removes the surprise, but removes the option for users to tweak the spamfiltering rules. - Don't use sieve_global_path, but instead distribute the default script to each user's homedir on user creation. This prevents making changes to the default script for existing users and in my setup, user creation and (mail)homedir creation are nicely separated through an LDAP directory, I'd rather not go this route. - When using the Roundcube webmail application as the IMAP client, I can point Roundcube at the default sieve script. Now, when Roundcube sees there are no scripts through ManageSieve, it shows a (fake) "default" script with the correct contents. As soon as the user changes this script or creates a new script, it is actually uploaded to Dovecot, causing the edited script to be used instead of the global script. This option has the user experience I'm looking for, but having this out-of-band connection from Roundcube to the default script configured with dovecot is ugly (and tricky, since these run on different hosts in my setup). The biggest problem is of course that this only works for Roundcube, not for any other IMAP client my users might use. So, I was wondering: Wouldn't it make sense for the managesieve plugin to do something similar to roundcube: When the user has no sieve script configured, let it fake a single "default" script, showing the contents of the global script? Since the ManageSieve protocol doesn't seem to support any way to flag this situation, it would be fooling the clients a bit, but I'm not sure if that's really a problem. While the user has not script named "default" in his sieve_dir: - include a script called "default" in the LISTSCRIPTS output. - return the contents of the sieve_global_path in the GETSCRIPT "default" command. - remove any sieve symlink after a SETACTIVE "default" command (as if SETACTIVE "" was given). This causes dovecot to fall back to the sieve_global_path script. - the DELETESCRIPT "default" command should fail. This might confuse clients and users, since it is listed in LISTSCRIPTS but cannot be deleted, but I think most users will understand they can't delete the default script. - RENAMESCRIPT "default" "some_name" should copy the sieve_global_path script into the user's sieve_dir. This will effectively copy the script instead of renaming it (since it will still be magically listed in LISTSCRIPTS), so that might be confusing. All other commands work just like they do now (in particular, PUTSCRIPT "default" uploads a script called "default" into the user's sieve_dir, preventing all of the above from applying. As noted above, this change might cause some confusion, but I think that is manageable. On additional thing is that running SETACTIVE "" will not completely disable sieve processing (as would be expected), but will (again) cause the sieve_global_path script to be run. This is already the case currently, though, and should probably be considered a separate problem (whose root cause is the lack of a difference between "no script script configured yet" and "active script disabled", both remove the sieve symlink). Also, this problem might be a feature in some setups, so fixing it might not be so easy... So, any thoughts on this? Any fundamental problems I'm missing? (Not-so) obvious alternatives? Gr. Matthijs

2 3

[Dovecot] postfix+dovecat: virtual domains with imap+lmtp
by el07694 03 Jun '12

03 Jun '12

Hi to all, I have tryed a few days to configure postfix/dovecot to run into a VPS machine (CentOs) -->The machine has 2 domains (but more in the future) -->i want info(a)mail.domain1.com and info(a)mail.domain2.com to be seperated mailboxes -->i want to use lmtp protocol to connect dovecot with postfix -->It will be perfect if i can use the system users for authentication I /etc/postfix/main.cf file looks like this smtpd_soft_error_limit = 10 smtpd_hard_error_limit = 20 masquerade_domains = mail.going-on.com mail.commundi.de masquerade_exceptions = root, papinhio relocated_maps = hash:/etc/postfix/relocated smtpd_client_restrictions = check_client_access hash:/etc/postfix/access virtual_mailbox_domains = mail.going-on.com mail.commundi.de virtual_mailbox_base = /var/spool/virtual_hosts virtual_mailbox_maps = hash:/etc/postfix/virtual virtual_uid_maps = static:0 virtual_gid_maps = static:0 mailbox_command = /usr/libexec/dovecot/dovecot-lda -f "$SENDER" -a "$RECIPIENT" dovecot_destination_recipient_limit = 1 mailbox_transport = lmtp:unix:private/dovecot-lmtp /etc/postfix/relocated file has only comments the same for /etc/postfix/access file i have made /var/spool/virtual_hosts folder with chmod 777 inside this folder i have made mail.going-on.com folder and mail.commundi.de folder cat /etc/postfix/virtual produce this: papinhio(a)mail.going-on.com mail.going-on.com/papinhio papinhio is a system_user!! uid,gid = 0 (the root user) master.cf file # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master"). # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd submission inet n - n - - smtpd -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes -o smtpd_sasl_type=dovecot -o smtpd_sasl_path=private/auth -o smtpd_sasl_security_options=noanonymous -o smtpd_sasl_local_domain=$myhostname -o smtpd_client_restrictions=permit_sasl_authenticated,reject -o smtpd_sender_login_maps=hash:/etc/postfix/virtual pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp relay unix - - n - - smtp -o fallback_relay= showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} # # The Cyrus deliver program has changed incompatibly, multiple times. # old-cyrus unix - n n - - pipe flags=R user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -m ${extension} ${user} # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 cyrus unix - n n - - pipe user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user} # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient dovecot unix - n n - - pipe flags=DRhu user=root:root argv=/usr/local/libexec/dovecot/dovecot-lda -f ${sender} -d ${recipient} Ok, the /etc/dovecot/dovecot.conf file looks like this: !include conf.d/*.conf !include_try local.conf protocols = imap lmtp service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } protocol lmtp { mail_plugins = quota sieve } mail_location = mbox:/var/spool/virtual_hosts/%d/%n Both of the services can start this no errors/warnings I can send mail from bash with this command : /bin/mail -s "Hello" "el07694(a)mail.ntua.gr" < /etc/dovecot/dovecot.conf Can anyone help me, plz? I don't know what i do wrong Thanks in advance, Chris Pappas

2 1

[Dovecot] sieve with dovecot v1.x
by Andreas Meyer 02 Jun '12

02 Jun '12

Hello! Is there a chance to have sieve working with dovecot version 1.0.5? /usr/lib/dovecot looks like this: -rwxr-xr-x 1 root root 43932 22. Sep 2007 checkpassword-reply -rwxr-xr-x 1 root root 538996 22. Sep 2007 deliver -rwxr-xr-x 1 root root 127728 22. Sep 2007 dict -rwxr-xr-x 1 root root 270248 22. Sep 2007 dovecot-auth -rwxr-xr-x 1 root root 43952 22. Sep 2007 gdbhelper -rwxr-xr-x 1 root root 48080 22. Sep 2007 idxview -rwxr-xr-x 1 root root 596364 22. Sep 2007 imap -rwxr-xr-x 1 root root 135912 22. Sep 2007 imap-login -rwxr-xr-x 1 root root 43952 22. Sep 2007 logview drwxr-xr-x 5 root root 4096 23. Dez 2008 modules -rwxr-xr-x 1 root root 529512 22. Sep 2007 pop3 -rwxr-xr-x 1 root root 127660 22. Sep 2007 pop3-login -rwxr-xr-x 1 root root 69056 22. Sep 2007 rawlog -rwxr-xr-x 1 root root 134748 22. Sep 2007 sievec -rwxr-xr-x 1 root root 68748 22. Sep 2007 sieved -rwxr-xr-x 1 root root 44116 22. Sep 2007 ssl-build-param so there is a sievec and a sieved, but in the dovecot.conf there is no mention about sieve. I would compile the latest version of dovecot if I knew, how the running 1.0.5 was built. I need it for an openSUSE 10.3 Kind regards Andreas

3 5

[Dovecot] Strange Dovecot 2.0.20 auth chokes and cores
by Alan Brown 02 Jun '12

02 Jun '12

> From: "Konrad ."<len7hir(a)gmail.com> > When we upgrade our kernels from 2.6.32.2 to 3.2.16 something strange > has happened. > On high traffic dovecot/auth looks like not responding. > > We found a lot of this lines at the log: [snip] > We compile Dovecot with poll instead of epoll (--with-ioloop=poll) and > this works for us. > > > Is any problem with epoll on 3.2.x kernels? Yes - and it's been discussed here. Some "bright spark" rewrote the kernel epoll code to prevent DoS attacks caused by "excessive forking". That "bright spark" clearly doesn't use imap or webserver software. Redhat backported this change to kernels released after February 2012 and are about to release an emergency kernel release which removes it. A number of $LARGE companies were "not happy" As you've posted, compiling without epoll fixes the problem, but that doesn't help anyone using distro or repo packages.

3 2

[Dovecot] interesting stats pattern
by Cor Bosman 02 Jun '12

02 Jun '12

Hey all, im experimenting with dovecot stats service, and graphing the result. My initial results are kind of interesting. Check out this graph showing connected sessions and users: http://grab.by/dReu At first I thought maybe one of our 35 imap servers was having issues sending data, but all individual servers show this patters. Here is a bunch of individual servers: http://grab.by/dReC Anyone have any idea what could cause such a pattern? Maybe dovecot does some cleaning up of idle sessions at specific intervals? Or maybe our loadbalancers do, or the imapdirectors. regards, Cor

5 7

[Dovecot] auth trouble
by Glenn English 02 Jun '12

02 Jun '12

Debian Lenny, Dovecot v 1.0.15. I'm getting a lot of what I think is a local socket asking dovecot:auth to verify username/passwords: > May 31 09:00:54 server dovecot-auth: pam_unix(dovecot:auth): authentication failure; logname= uid=0 euid=0 tty=dovecot ruser=admin rhost= Note the empty 'rhost='. That's why I think it's on the server. I see others that look like bots: > May 30 23:08:43 server dovecot-auth: pam_unix(dovecot:auth): authentication failure; logname= uid=0 euid=0 tty=dovecot ruser=admin rhost=200.119.139.22 And I know how to promote the latter to a firewall. But with no rhost, I'm stumped... I've read books, googled, read docs, and asked for help on other mailing lists, and I've learned a lot. And I no longer think it really has much to do with Dovecot, other than the login attempt going through it to get to PAM. But has anyone here seen this before? Is my current theory correct? What did you do to make it go away? (I suspect that upgrading to Debian Squeeze might get rid of it, but I'm afraid that if I don't figure out what's going on, it might just come back.) -- Glenn English hand-wrapped from my Apple Mail

1 1

[Dovecot] Inconsistent search results and crash on force-resync
by Joe Beaubien 01 Jun '12

01 Jun '12

Hi, I am seeing inconsistencies in search results (finding 2 emails when only 1 exists, finding the email when it has been moved to another folder, etc). I figured I should run force-resync to fix any issues. I ran the following: doveadm -v force-resync -u <user> <mailbox> and I got some worrysome logs. - I should mention that I have been seeing some crashes of fts-lucene in my logs. I sent a traceback of this on the mailing list 1-2 days ago under the subject "[Dovecot] fts_lucene crashing". - I should also mention that all the problems I am having are only in 1 email account. This email account contains folders of over 100k emails. Do I need to tweak dovecot somehow for this? Up until now all I did was change vsz_limit to 1024 MB for "service imap". Here are the logs: Jun 1 11:15:01 XXXXX dovecot: imap(form): Error: Recent flags state corrupted for mailbox INBOX2 Jun 1 11:15:01 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/INBOX2/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:01 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/INBOX2/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:01 XXXXX dovecot: imap(form): Error: Recent flags state corrupted for mailbox contrat Jun 1 11:15:01 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/contrat/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:01 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/rep_Immigation soi-m&AOo-me/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:01 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/Templates/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:02 XXXXX dovecot: imap(form): Error: Recent flags state corrupted for mailbox rep_eval_positive Jun 1 11:15:02 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/rep_eval_positive/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:02 XXXXX dovecot: imap(form): Error: Recent flags state corrupted for mailbox Sent Jun 1 11:15:02 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/Sent/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:02 XXXXX dovecot: imap(form): Error: Recent flags state corrupted for mailbox form_positif Jun 1 11:15:02 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/form_positif/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:02 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/Archives/contrat/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:02 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/form_positif/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:02 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/form_positif/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:03 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/Archives/form_indetermine/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:03 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/Archives/form_indetermine/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:15 XXXXX dovecot: imap(form): Error: Recent flags state corrupted for mailbox form_indetermine Jun 1 11:15:15 XXXXX dovecot: imap(form): Error: /data/emails/form/mailboxes/form_indetermine/dbox-Mails/dovecot.index reset, view is now inconsistent Jun 1 11:15:25 XXXXX dovecot: indexer-worker: Error: indexer-worker: /home/jd/work/clucene-core-2.3.3.4/src/core/CLucene/index/DocumentsWriter.cpp:210: std::string lucene::index::DocumentsWriter::closeDocStore(): Assertion `numDocsInStore*8 == directory->fileLength( (docStoreSegment + "." + IndexFileNames::FIELDS_INDEX_EXTENSION).c_str() )' failed. Jun 1 11:15:25 XXXXX dovecot: indexer: Error: Indexer worker disconnected, discarding 28 requests for form Jun 1 11:15:25 XXXXX dovecot: indexer-worker(form): Fatal: master: service(indexer-worker): child 9909 killed with signal 6 (core not dumped) I have 3 questions: 1) When the log says "/mailboxes/INBOX2/dbox-Mails/dovecot.index reset, view is now inconsistent" should I be worried, or this will fix itself? 2) Should I expect to see "Error: Recent flags state corrupted for mailbox Sent"??? I ran the force-resync 3 times and I still see this message. 3) Any idea why clucene is crashing? Regards, -Joe

1 0