- dovecot - dovecot.org

[Dovecot] Error in dovecot 2.0.13: "Too many levels of symbolic links"
by Tom Pawlowski 17 May '12

17 May '12

Hi all, I've run into an issue we have with dovecot versions 2.0.12 through 2.0.14 on latest CentOS 6.2 when dealing with Maildirs located on NFS partitions. Although I saw Mr. Egbert's thread, his resolution does not work on our end. When dealing with users with over 500 messages in any of their Maildir folders, they occasionally receive an error from the server: Internal error occurred. Refer to server log for more information. The corresponding log entries: dovecot: imap(user1): Error: readdir(/u1/user1/Maildir/.AUTO-DELETED-SPAM/new) failed: Too many levels of symbolic links dovecot: imap(user1): Error: readdir(/u1/user1/Maildir/.logwatch/new) failed: Too many levels of symbolic links dovecot: imap(user2): Error: readdir(/u2/user2/Maildir/cur) failed: Too many levels of symbolic links dovecot: imap(user2): Error: readdir(/u2/user2/Maildir/.Trash/new) failed: Too many levels of symbolic links dovecot: imap(user3): Error: readdir(/u1/user3/Maildir/.Trash/new) failed: Too many levels of symbolic links dovecot: imap(user3): Error: readdir(/u4/user3/Maildir/.AUTO-DELETED-SPAM/new) failed: Too many levels of symbolic links dovecot: imap(user4): Error: readdir(/u1/user4/Maildir/.AUTO-DELETED-SPAM/new) failed: Too many levels of symbolic links dovecot: imap(user4): Error: readdir(/u1/user4/Maildir/new) failed: Too many levels of symbolic links A 'find . -type l' shows there are absolutely no symbolic links to be found in those directories. Running readdir.c that Timo provided always returns errno == 0 on {cur,new} of all the directories reported in the logs. It does not occur consistently in production, but it does tend to occur to a fuzzy set of the same users on different partitions. We can replicate it every time in testing. The file count in these directories are all over the place, from less than a thousand to multiple thousands. However, it's hard to calculate what may have been in new prior to the clients processing/sorting that mail. It may have been more on the higher side than lower. The error tends to favor new over cur, but there are exceptions. The tests we have been trying: Create a new folder using alpine, save anywhere from 1000 to 10000 identical emails to the new folder. Change to that new folder, thus prompting the move from new to cur. The client receives the message and aborts the opening. Anywhere from 400-520 files are successfully moved each time. It takes numerous attempts to finally move all the files over--which I suspect some IMAP clients do, hence the inconsistent errors in production. We then create a brand new folder with the same amount of files and verify that the error is reproduceable--which it is. I'm leaning towards some sort of bug on the NFS client level, as Timo mentioned, but the odd thing is we were running this setup since early April and did not begin seeing these errors until early May--with user load being relatively consistent during that time. I would think the bug would have been evident before then. I'm also curious as to why dovecot is getting an ELOOP error code from it. Any ideas or pointers would be appreciated, sorry for the length. :) -- Tom Pawlowski OIT-CSS System Administrator office: Hill 145 email: tompru(a)jla.rutgers.edu phone: (732) 445-2634

2 2

[Dovecot] Migration between namespaces breaks outlook on mac's
by Mark Zealey 17 May '12

17 May '12

Hi there, We're running dovecot 1.1 on one set of servers with a courier-imap-like namespace configuration: namespace private { separator = . prefix = INBOX. inbox = yes } We're now migrating customers onto a dovecot-2 platform, switching from Maildir to sdbox (using dsync mirror) & changing the namespace at the same time. New namespace configuration looks like (as taken from http://wiki2.dovecot.org/Namespaces) # This is for courier-imap namespace compatability namespace { type = private separator = / prefix = inbox = yes } namespace { type = private prefix = INBOX. separator = . inbox = no hidden = yes list = no alias_for = } For 99% of clients this works fine eg thunderbird on first login after migration notices the folder structure has changed & automagically redownloads folders & emails. However I have noticed some really strange messages in the logs which seems to be related to customers running outlook on macos. When they login after migration they are generating commands like: 2012-05-07T00:04:43+01:00 imap-03 dovecot: imap(xxxx): Mailbox created: INBOX 1 1 1 1 1 2012-05-07T00:05:38+01:00 imap-03 dovecot: imap(xxxx): Mailbox created: INBOX 1 1 1 1 1 1 2012-05-07T00:06:44+01:00 imap-03 dovecot: imap(xxxx): Mailbox created: INBOX 1 1 1 1 1 1 1 2012-05-07T00:07:33+01:00 imap-03 dovecot: imap(xxxx): Mailbox created: INBOX 1 1 1 1 1 1 1 1 2012-05-07T00:08:42+01:00 imap-03 dovecot: imap(xxxx): Mailbox created: INBOX 1 1 1 1 1 1 1 1 1 2012-05-07T03:09:00+01:00 imap-03 dovecot: imap(xxxx): Mailbox created: INBOX 1 1 1 1 1 1 1 1 1 1 2012-05-07T03:09:08+01:00 imap-03 dovecot: imap(xxxx): Mailbox created: INBOX 1 1 1 1 1 1 1 1 1 1 1 2012-05-07T03:10:09+01:00 imap-03 dovecot: imap(xxxx): Mailbox created: INBOX 1 1 1 1 1 1 1 1 1 1 1 1 ... this goes on a long time and we've not yet found a solution other than delete the imap config on their outlook and reconfigure. Does anyone have any idea why this might be happening, or if there is a way we can somehow have old namespaces for old customers, new namespaces for new customers (we are using sql login code so should be possible to do something like this in theory I think?) Thanks, Mark

1 0

[Dovecot] How to make Dovecot verbous
by Frank Walter 16 May '12

16 May '12

Hello I am struggling with Dovecot 2 (coming from Dovecot 1.0.10) with mysql Authentification for Postfix. I get errors when using it: dovecot: auth: Fatal: Unknown database driver 'mysql' dovecot: master: Error: service(auth): command startup failed, throttling But a first thing would be to log the real errors, if there are any, so I set in /etc/dovecot/conf.d/10-logging.conf auth_verbose, auth_verbose_passwords, auth_debug, auth_debug_passwords, mail_debug, verbose_ssl all to yes and I set: debug_log_path = /var/log/dovecot-debug.log but there is no logfile after restarting dovecot. How can I enable a (verbous) own Logfile in Dovecot? frank

3 4

Re: [Dovecot] Can we know when a user read our email?
by Joseph Tam 16 May '12

16 May '12

On Tue, 15 May 2012, Stan Hoeppner writes > This "unsend" feature was created to protect idiots from themselves, > nothing more. Which is why the IETF draft went nowhere. > > You can only "fix" some types of human stupidity with software. This is > not one of them. I thought someone could make money coming up with an "unsend" and "untwitter" service that all it does is to queue the outgoing message for 5 minutes, during which the sender can re-consider and remove it from the queue. Sorot of like the kill-switch for live broadcasts. But as the saying goes, you can't make things foolproof, as they keep making better fools. As to the OP trying to determine whether an Email message has been read, an indirect and imperfect technique, used by spammers and marketing critters, is to web bug http://en.wikipedia.org/wiki/Web_bugs It works by placing innocuous individualized tags in HTML formatted Email e.g. "<img src="http://your.domain/?id={hash}>" that downloads a 1x1 dot). You can then correlate web logs with the hashes to see which messages got rendered. A hit does not necessarily mean it got read, and the absense does not mean it was ignored, but it's better than nothing. If you value your privacy, turn off HTML rendering on your Email reader. Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] server with only shared mailboxes ?
by Frank Bonnet 16 May '12

16 May '12

hello I would like to setup a separate server with only shared mailboxes for internal use links to doc welcome (dovecot 2 ) thank you Envoyé de mon iPhone.

1 0

[Dovecot] plugin: Don't allow deleting the last instance of a mail
by Timo Sirainen 16 May '12

16 May '12

Before beginning to code it, does anyone have any related ideas that could be useful before starting it? Mainly what I'm intending to do is to write a plugin for mdbox storage that allows users to expunge mails in a specific namespace only if there are other instances for the mail. So basically: * Users can't accidentally delete mails (in shared mailboxes) * Users can still move mails within folders For v2.1 this can be implemented only to a specific storage backend, so at least for now only mdbox will support it. Maildir and sdbox support would also be possible by looking at hard link counts. Race conditions would allow deleting the mails, but that's unlikely to be an issue since the main point is to avoid accidental deletions that shouldn't be attempted in the first place anyway.

2 3

[Dovecot] stats + fts squat plugins, indexer-worker error on message indexing
by David Warden 16 May '12

16 May '12

On RHEL 6.2 + dovecot 2.1.5 with the stats and fts (squat) plugins enabled and each user having their own uid on the system I get the following error in the logs when the indexer-worker process indexes some messages: Apr 25 09:56:19 wardentest3 dovecot: imap-login: Login: user=warden, method=PLAIN, rip=137.238.60.164, lip=137.238.2.240, lport=1993, mpid=19464, encryption=TLS Apr 25 09:56:26 wardentest3 dovecot: service=indexer-worker user=warden rip= Indexed 12 messages in INBOX Apr 25 09:56:26 wardentest3 dovecot: service=indexer-worker user=warden rip= Error: open(/proc/self/io) failed: Permission denied Apr 25 09:56:29 wardentest3 dovecot: service=imap user=warden rip=137.238.60.164 Disconnected: Logged out bytes(in/out)=46/780 What I did to generate the above was remove the squat indexes for my Inbox then log in via telnet and search for a string in my Inbox, which forced an index of the messages in my Inbox. Based on http://wiki2.dovecot.org/Services#indexer-worker it seems like this is because the indexer-worker process is created as root but at the time of indexing the indexer-worker drops privs to the mail user. In /proc/<indexer-worker pid>/, io is mode 0400 and owned by root, so it makes sense that the mail user would be unable to read that file. The strange thing is it looks like the stats are still collected (unless I am reading the output of the stats dump incorrectly): [root@wardentest3 mailtest]# doveadm stats dump -s /var/run/dovecot/mailtest/stats command user=warden cmd args session user last_update user_cpu sys_cpu min_faults maj_faults vol_cs invol_cs disk_input disk_output read_count read_bytes write_count write_bytes mail_lookup_path mail_lookup_attr mail_read_count mail_read_bytes mail_cache_hits select inbox 27fb87218302984f084c0000ae899e04 warden 1335362182.950250 0.000000 0.000000 172 0 46 0 0 12288 13 7883 4 381 0 0 0 0 0 search text "warden" 27fb87218302984f084c0000ae899e04 warden 1335362186.588023 0.001000 0.000000 32 0 4 1 0 0 4 108 1 43 0 0 0 0 0 logout 27fb87218302984f084c0000ae899e04 warden 1335362189.161790 0.000000 0.000000 1 0 0 3 0 0 1 108 3 157 0 0 0 0 0 This obviously isn't a show-stopper but if this is causing stats to be incorrect it would be great if this could be fixed. -David Warden My doveconf -n: # 2.1.5: /etc/dovecot/mailtest/dovecot.conf doveconf: Warning: service auth { client_limit=4096 } is lower than required under max. load (12288) doveconf: Warning: service anvil { client_limit=4096 } is lower than required under max. load (12291) # OS: Linux 2.6.32-220.7.1.el6.x86_64 x86_64 Red Hat Enterprise Linux Server release 6.2 (Santiago) nfs auth_cache_negative_ttl = 0 auth_cache_size = 16 M auth_gssapi_hostname = $ALL auth_krb5_keytab = /etc/dovecot/mailtest.combined.keytab auth_master_user_separator = * auth_mechanisms = plain login gssapi auth_username_format = %Ln base_dir = /var/run/dovecot/mailtest/ default_client_limit = 4096 default_process_limit = 4096 deliver_log_format = msgid="%m" subject="%s" from="%f" size=%p result="%$" first_valid_uid = 0 hostname = mailtest.geneseo.edu instance_name = mailtest lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes login_log_format_elements = user=%u method=%m rip=%r lip=%l lport=%a mpid=%e encryption=%c mail_fsync = always mail_location = maildir:/Mail/mailhome/%Ln/mailtest/Maildir:CONTROL=/Mail/mailhome/%Ln/mailtest/.dovecot-control:INDEX=/Mail/mailhome/%Ln/mailtest/.dovecot-index mail_log_prefix = "service=%s user=%u rip=%r " mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = zlib quota mail_log notify fts fts_squat stats maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mbox_write_locks = fcntl mmap_disable = yes namespace default { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = no special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = . type = private } passdb { args = /etc/dovecot/passwd.masterusers driver = passwd-file master = yes } passdb { args = cache_key=%u dovecot driver = pam } plugin { fts = squat mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename flag_change append mail_log_fields = uid box msgid size from subject flags mail_log_group_events = yes quota = maildir:User quota quota_exceeded_message = Quota exceeded (mailbox for user is full). Please see http://go.geneseo.edu/emailoverquota for help deleting messages while over quota. quota_rule = *:storage=200M quota_rule2 = Trash:storage=+50M sieve = /Mail/mailhome/%Ln/mailtest/.filter.sieve sieve_dir = /Mail/mailhome/%Ln/mailtest/.sievedir sieve_max_redirects = 25 stats_memory_limit = 32 M stats_refresh = 30 secs stats_track_cmds = yes } postmaster_address = postmaster(a)geneseo.edu protocols = imap sieve lmtp quota_full_tempfail = yes service auth { unix_listener auth-exim { group = exim mode = 0660 } } service imap-login { inet_listener imap { port = 1143 } inet_listener imaps { port = 1993 } service_count = 0 vsz_limit = 256 M } service imap { process_limit = 4096 } service lmtp { inet_listener lmtp { port = 124 } } service managesieve-login { inet_listener sieve { port = 14190 } inet_listener sieve_deprecated { port = 12000 } } service pop3 { process_limit = 4096 } service stats { fifo_listener stats-mail { mode = 0666 } } ssl_ca = </etc/pki/tls/certs/geotrust-intermediate.pem ssl_cert = </etc/pki/tls/certs/wildcard-geotrust.geneseo.edu.pem ssl_key = </etc/pki/tls/private/wildcard-geotrust.geneseo.edu.key userdb { driver = passwd } verbose_proctitle = yes protocol lmtp { mail_plugins = zlib quota mail_log notify fts fts_squat stats sieve } protocol lda { mail_location = maildir:/Mail/mailhome/%Ln/mailtest/Maildir:CONTROL=/Mail/mailhome/%Ln/mailtest/.dovecot-control:INDEX=/Mail/mailhome/%Ln/mailtest/.dovecot-index mail_plugins = zlib quota mail_log notify fts fts_squat stats sieve plugin { quota = maildir:User quota quota_rule = *:storage=200M quota_rule2 = Trash:storage=+50M zlib_save = gz zlib_save_level = 6 } } protocol imap { imap_logout_format = bytes(in/out)=%i/%o mail_max_userip_connections = 50 mail_plugins = zlib quota mail_log notify fts fts_squat stats imap_quota autocreate imap_zlib imap_stats } protocol sieve { managesieve_logout_format = bytes(in/out)=%i/%o } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_logout_format = bytes(in/out)=%i/%o, top=%t/%p, retr=%r/%b, del=%d/%m, mailbox-size=%s pop3_uidl_format = UID%u-%v } remote 137.238.0.0/16/16 { disable_plaintext_auth = no }

3 4

[Dovecot] [Plugin dev] First-time-only cache lock failure
by John G 15 May '12

15 May '12

Hi This is a question related to plugin developement on Dovecot 2.1.4. I'm currently implementing a dovecot plugin that retrieves mails from a corporate server through an internal protocol. The plugin is very similar to the pop3c storage (lib-storage/index/pop3c). The plugin has to map original server UIDs to IMAP UIDs, using MAIL_CACHE_POP3_UIDL cache field the same way pop3c does. So, I've got a function similar to pop3c_sync_messages(), performing several mail_index_append() and mail_cache_add() calls. The problem is that on the first sync, when the index and cache files don't exist yet, there's a failure writing data in cache. The call to mail_index_sync_commit()\mail_cache_transaction_commit() fails because of mail_cache_transaction_lock(). The index and cache files are properly created, but the cache doesn't contain the MAIL_CACHE_POP3_UIDL values. It works properly on the second sync, the MAIL_CACHE_POP3_UIDL field being properly saved. Would you have some ideas on what could be wrong here? Thanks, John

2 2

[Dovecot] dovecot/auth killed with signal 6
by Edward Burr 15 May '12

15 May '12

I've had this working for over a month now with no problems. Then I suffered a power outage today, and now dovecot/auth dies as soon as I start dovecot. I've spent the past three hours searching google, but can't find even a hint at what's wrong with my server. As far as I can tell, this is the only thing that has failed after bringing the server back up when power was restored. Can anyone help me figure out what is wrong? The maillog records: May 9 20:27:37 box dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth May 9 20:27:37 box dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so May 9 20:27:37 box dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_mysql.so May 9 20:27:37 box dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_pgsql.so May 9 20:27:37 box dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so May 9 20:27:37 box dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libmech_gssapi.so May 9 20:27:37 box dovecot: auth: Panic: io_add(0x1) called twice fd=13, callback=0x3016833290 -> 0x3016836cd0 May 9 20:27:37 box dovecot: auth: Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0() [0x301683ca6a] -> /usr/lib64/dovecot/libdovecot.so.0() [0x301683ca b6] -> /usr/lib64/dovecot/libdovecot.so.0() [0x3016816dba] -> /usr/lib64/dovecot/libdovecot.so.0(ioloop_iolist_add+0x7f) [0x301684872f] -> /usr/lib64/dovecot/li bdovecot.so.0(io_loop_handle_add+0x39) [0x3016849149] -> /usr/lib64/dovecot/libdovecot.so.0(io_add+0xa3) [0x3016848593] -> /usr/lib64/dovecot/libdovecot.so.0(ma ster_service_io_listeners_add+0x68) [0x3016835b88] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_init_finish+0x192) [0x30168363c2] -> dovecot/auth(main+0 x207) [0x415567] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x3016c1ecdd] -> dovecot/auth() [0x409aa9] May 9 20:27:37 box dovecot: master: Error: service(auth): child 25615 killed with signal 6 (core dumped) May 9 20:27:37 box dovecot: master: Error: service(auth): command startup failed, throttling A core dump was produced. The backtrace shows: # gdb /usr/libexec/dovecot/auth coredump Core was generated by `dovecot/auth'. Program terminated with signal 6, Aborted. #0 0x0000003016c32885 in raise () from /lib64/libc.so.6 Missing separate debuginfos, use: debuginfo-install dovecot-2.0.9-2.el6_1.1.x86_64 (gdb) bt full #0 0x0000003016c32885 in raise () from /lib64/libc.so.6 #1 0x0000003016c34065 in abort () from /lib64/libc.so.6 #2 0x000000301683ca78 in ?? () from /usr/lib64/dovecot/libdovecot.so.0 #3 0x000000301683cab6 in ?? () from /usr/lib64/dovecot/libdovecot.so.0 #4 0x0000003016816dba in i_panic () from /usr/lib64/dovecot/libdovecot.so.0 #5 0x000000301684872f in ioloop_iolist_add () from /usr/lib64/dovecot/libdovecot.so.0 #6 0x0000003016849149 in io_loop_handle_add () from /usr/lib64/dovecot/libdovecot.so.0 #7 0x0000003016848593 in io_add () from /usr/lib64/dovecot/libdovecot.so.0 #8 0x0000003016835b88 in master_service_io_listeners_add () from /usr/lib64/dovecot/libdovecot.so.0 #9 0x00000030168363c2 in master_service_init_finish () from /usr/lib64/dovecot/libdovecot.so.0 #10 0x0000000000415567 in main () This is running on CentOS 6.2 # rpm -q dovecot dovecot-2.0.9-2.el6_1.1.x86_64 # dovecot --version 2.0.9 # dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.13.1.el6.x86_64 x86_64 CentOS release 6.2 (Final) auth_debug = yes auth_mechanisms = plain login auth_verbose = yes listen = * mail_debug = yes mail_location = mbox:~/mail:INBOX=/var/mail/%u managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mbox_write_locks = fcntl passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } service auth { inet_listener { port = 12345 } unix_listener /var/spool/postfix/private/auth { mode = 0666 } user = $default_internal_user } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd }

2 4

[Dovecot] default mail quota when using per user quota
by Andreas Helmcke 14 May '12

14 May '12

Hello, using dovecot 2.1 and per user mail quota via ldap is there a way to have a default quota which gets used, if the "quota" field in ldap is not set? I tried with: plugin { quota = maildir:User quota quota_rule = *:storage=3G } userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } and in dovecot-ldap.conf: user_attrs = dcMailQuota=quota_rule=*:storage=%$ but with this configuration the mail quota /allways/ gets loaded from ldap resulting in users without dcMailQuota attribute having no quota at all. Greetings Andreas

3 11

[Dovecot] doveadm not working
by Christian Rößner 14 May '12

14 May '12

Hi, I know I must have done some misconfiguration, but I do not know where to start searching for. All began when looking at my weekly cron message, where doveadm purge -A is run. That fails. So I tried doveadm quota -A as well, which several weeks ago was working perfectly. Example: doveadm quota get -A doveadm(root): Error: User listing returned failure doveadm: Error: Failed to iterate through some users Username Quota name Type Value Limit % All I see in the logs is: May 13 13:03:20 mx0 dovecot: auth: Error: auth worker: Aborted request: Lookup timed out May 13 13:03:21 mx0 dovecot: auth-worker(26753): Error: LDAP: ldap_start_tls_s() failed: Connect error May 13 13:03:21 mx0 dovecot: auth-worker(26753): Error: LDAP: ldap_start_tls_s() failed: Can't contact LDAP server Dovecot itself works. Only doveadm does not. My LDAP is using SASL/EXTERNAL. Certs are in standard folders under /etc/ssl/{certs,private} (see below). I guess that "some" user (but which?) tries to read the certs but is disallowed. Can somebody help me please to fix my permissions on that (private used) mail server? Is my "vmail" user required? Thanks in advance Here is my doveconf -n: # 2.1.6: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-41-generic-pae i686 Ubuntu 10.04.4 LTS auth_master_user_separator = * auth_mechanisms = plain login auth_verbose = yes hostname = mail.roessner-net.de lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes mail_access_groups = vmail mail_gid = vmail mail_location = mdbox:~/mdbox mail_plugins = autocreate quota acl fts fts_solr zlib mail_log notify mail_privileged_group = mail mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { list = children location = mdbox:%%h/mdbox prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox "Deleted Messages" { special_use = \Trash } mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } mailbox junkmail { special_use = \Junk } prefix = separator = / type = private } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/var/mail/virtual/shared-mailboxes.db autocreate = Trash autocreate2 = Sent autocreate3 = Drafts autocreate4 = junkmail autosubscribe = Trash autosubscribe2 = Sent autosubscribe3 = Drafts autosubscribe4 = junkmail fts = solr fts_solr = break-imap-search url=http://localhost:8080/solr/ mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = dict:User quota::file:%h/mdbox/dovecot-quota quota_rule = *:storage=300M:messages=20000 quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve zlib_save = gz zlib_save_level = 6 } protocols = imap pop3 lmtp sieve service auth-worker { unix_listener auth-worker { user = vmail } user = vmail } service auth { extra_groups = ssl-cert unix_listener auth-userdb { mode = 0600 user = vmail } user = vmail } service dict { unix_listener dict { mode = 0600 user = vmail } } service lmtp { inet_listener lmtp { address = ::1 port = 24 } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl_ca = </etc/ssl/certs/SSL123_CA_Bundle.pem ssl_cert = </etc/ssl/certs/mail.roessner-net.de.pem ssl_key = </etc/ssl/private/mail.roessner-net.de.key.pem userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = autocreate quota acl fts fts_solr zlib mail_log notify sieve } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep tb-lsub-flags mail_max_userip_connections = 50 mail_plugins = autocreate quota acl fts fts_solr zlib mail_log notify imap_quota imap_acl imap_zlib } And here my ldap stuff: uris = ldap://ldap0.roessner-net.de/ ldap://db.roessner-net.de/ sasl_bind = yes sasl_mech = EXTERNAL tls = yes tls_ca_cert_file = /etc/ssl/certs/ca-certificates.crt tls_cert_file = /etc/ssl/certs/mx0.roessner-net.de.pem tls_key_file = /etc/ssl/private/mx0.roessner-net.de.key.pem tls_require_cert = hard base = ou=people,ou=it,dc=roessner-net,dc=de user_attrs = rnsMSQuota=quota_rule=*:storage=%$,rnsMSMailboxHome=home user_filter = (&(objectClass=rnsMSDovecotAccount)(rnsMSRecipientAddress=%u)) pass_attrs = rnsMSDeliverToAddress=user,userPassword=password pass_filter = (&(objectClass=rnsMSDovecotAccount)(rnsMSRecipientAddress=%u)(rnsMSEnableDovecot=TRUE)) iterate_attrs = rnsMSDovecotUser=user iterate_filter = (objectClass=rnsMSDovecotAccount) default_pass_scheme = CRYPT id vmail uid=5000(vmail) gid=5000(vmail) groups=111(ssl-cert),5000(vmail) ls -l /etc/ssl/private/mail.roessner-net.de.key.pem -rw-r----- 1 root ssl-cert 1679 2012-03-29 10:03 /etc/ssl/private/mail.roessner-net.de.key.pem -Christian Rößner --- Roessner-Network-Solutions Bachelor of Science Informatik Nahrungsberg 81, 35390 Gießen F: +49 641 5879091, M: +49 176 93118939 USt-IdNr.: DE225643613 http://www.roessner-network-solutions.com

2 5

[Dovecot] managesieve problem
by Miroslav Míšek 14 May '12

14 May '12

Hi, please could anyone help me with managesieve problem? I have working dovecot (imap) and now i am trying to run managesieve plugin. But I am still getting error: May 14 00:05:41 thor dovecot: managesieve-login: Fatal: Error reading configuration: Invalid settings: ssl enabled, but ssl_cert not set May 14 00:05:41 thor dovecot: master: Error: service(managesieve-login): command startup failed, throttling Here is my configuration: # doveconf -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.13.1.el6.x86_64 x86_64 CentOS release 6.2 (Final) ext4 auth_mechanisms = plain login first_valid_uid = 200 last_valid_uid = 200 mail_location = maildir:/home/vmail/%1d/%d/%n/Maildir mbox_write_locks = fcntl passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { group = vmail mode = 0660 user = vmail } } service managesieve-login { executable = managesieve-login director inet_listener sieve_deprecated { port = 2000 } } service managesieve { executable = managesieve director } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { args = uid=vmail gid=vmail home=/home/vmail/%1d/%d/%n/Maildir driver = static } And: [root@thor test]# ls -l /etc/pki/dovecot/certs/dovecot.pem -rw------- 1 root root 847 May 10 13:24 /etc/pki/dovecot/certs/dovecot.pem [root@thor test]# ls -l /etc/pki/dovecot/private/dovecot.pem -rw------- 1 root root 916 May 10 13:24 /etc/pki/dovecot/private/dovecot.pem I don`t know what can be wrong. Thanks, Miroslav Misek

2 2

Re: [Dovecot] mailbox_check_mismatching_separators
by Danilo Acquaviva 14 May '12

14 May '12

Sorry , copying list . On Mon, May 14, 2012 at 2:18 PM, Danilo Acquaviva <dnl555(a)gmail.com> wrote: > Hi Timo, > > same happening with 2.1.6 : > > find mdbox/mailboxes/ -type d > > mdbox/mailboxes/Lixeira > mdbox/mailboxes/Lixeira/dbox-Mails > mdbox/mailboxes/Deleted Messages > mdbox/mailboxes/Deleted Messages/dbox-Mails > mdbox/mailboxes/Junk (Ana Paula | Anpla Comunicac&Ayc-a&AwM-o Planejada) > mdbox/mailboxes/Junk (Ana Paula | Anpla Comunicac&Ayc-a&AwM-o > Planejada)/dbox-Mails > mdbox/mailboxes/Apple Mail To Do > mdbox/mailboxes/Apple Mail To Do/dbox-Mails > mdbox/mailboxes/lixo > mdbox/mailboxes/lixo/dbox-Mails > mdbox/mailboxes/Drafts > mdbox/mailboxes/Drafts/dbox-Mails > mdbox/mailboxes/Rascunhos > mdbox/mailboxes/Rascunhos/dbox-Mails > mdbox/mailboxes/rascunho > mdbox/mailboxes/rascunho/dbox-Mails > mdbox/mailboxes/Itens Enviados > mdbox/mailboxes/Itens Enviados/dbox-Mails > mdbox/mailboxes/Inventta > mdbox/mailboxes/Inventta/dbox-Mails > mdbox/mailboxes/Notes > mdbox/mailboxes/Notes/dbox-Mails > mdbox/mailboxes/Vila Lourdes > mdbox/mailboxes/Vila Lourdes/dbox-Mails > mdbox/mailboxes/enviadas > mdbox/mailboxes/enviadas/dbox-Mails > mdbox/mailboxes/Monograma > mdbox/mailboxes/Monograma/dbox-Mails > mdbox/mailboxes/Drafts (Ana Paula) > mdbox/mailboxes/Drafts (Ana Paula)/dbox-Mails > mdbox/mailboxes/Spam > mdbox/mailboxes/Spam/dbox-Mails > mdbox/mailboxes/Sent Messages > mdbox/mailboxes/Sent Messages/dbox-Mails > mdbox/mailboxes/Clientes > mdbox/mailboxes/Clientes/Confiserie du Chocolat > mdbox/mailboxes/Clientes/Confiserie du Chocolat/dbox-Mails > mdbox/mailboxes/Clientes/Martins &- Bueno > mdbox/mailboxes/Clientes/Martins &- Bueno/dbox-Mails > mdbox/mailboxes/Mala_Direta > mdbox/mailboxes/Mala_Direta/dbox-Mails > mdbox/mailboxes/INBOX > mdbox/mailboxes/INBOX/Mala_Direta > mdbox/mailboxes/INBOX/Mala_Direta/dbox-Mails > mdbox/mailboxes/INBOX/INBOX > mdbox/mailboxes/INBOX/INBOX/INBOX > mdbox/mailboxes/INBOX/INBOX/INBOX/INBOX > mdbox/mailboxes/INBOX/INBOX/INBOX/INBOX/INBOX > mdbox/mailboxes/INBOX/INBOX/INBOX/INBOX/INBOX/INBOX > mdbox/mailboxes/INBOX/INBOX/INBOX/INBOX/INBOX/INBOX/Apple Mail To Do > mdbox/mailboxes/INBOX/INBOX/INBOX/INBOX/INBOX/INBOX/Apple Mail To > Do/dbox-Mails > mdbox/mailboxes/INBOX/INBOX/INBOX/INBOX/INBOX/INBOX/INBOX > mdbox/mailboxes/INBOX/INBOX/INBOX/INBOX/INBOX/INBOX/INBOX/Apple Mail To Do > mdbox/mailboxes/INBOX/INBOX/INBOX/INBOX/INBOX/INBOX/INBOX/Apple Mail To > Do/dbox-Mails > mdbox/mailboxes/INBOX/dbox-Mails > > > ------------ > > doveconf -n namespace > > namespace { > inbox = yes > location = > prefix = INBOX. > separator = . > type = private > } > namespace { > hidden = yes > list = no > location = mdbox:%h/la_config > prefix = la_config. > separator = . > } > > gdb output: > > gdb --args doveadm force-resync -u user@server INBOX > > Starting program: /usr/bin/doveadm force-resync -u <USER> INBOX > [Thread debugging using libthread_db enabled] > doveadm(user@server): Warning: mdbox > /storage/3/bd/05/server/users/user/mdbox/storage: rebuilding indexes > doveadm(user@server): Panic: file mail-storage.c: line 787 > (mailbox_check_mismatching_separators): assertion failed: (strncmp(vname, > ns->prefix, ns->prefix_len-1) == 0) > doveadm(user@server): Error: Raw backtrace: > /usr/lib/dovecot/libdovecot.so.0(+0x4475a) [0x7ffff76ab75a] -> > /usr/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x32) > [0x7ffff76ab842] -> /usr/lib/dovecot/libdovecot.so.0(i_error+0) > [0x7ffff76825bf] -> > /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_open_stream+0) > [0x7ffff7933e50] -> > /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_open+0xf) [0x7ffff7933e6f] > -> > /usr/lib/dovecot/libdovecot-storage.so.0(mdbox_storage_rebuild_in_context+0xb2b) > [0x7ffff79235ab] -> > /usr/lib/dovecot/libdovecot-storage.so.0(mdbox_sync_begin+0x7ec) > [0x7ffff792157c] -> > /usr/lib/dovecot/libdovecot-storage.so.0(mdbox_sync+0x46) [0x7ffff79215e6] > -> /usr/lib/dovecot/libdovecot-storage.so.0(mdbox_storage_sync_init+0x87) > [0x7ffff79216c7] -> > /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x31) > [0x7ffff7932a01] -> > /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync+0x27) > [0x7ffff7933537] -> /usr/bin/doveadm() [0x4104c7] -> /usr/bin/doveadm() > [0x40f988] -> /usr/bin/doveadm() [0x40fce4] -> > /usr/bin/doveadm(doveadm_mail_try_run+0x141) [0x410161] -> > /usr/bin/doveadm(main+0x3a1) [0x416f01] -> > /lib/libc.so.6(__libc_start_main+0xfd) [0x7ffff7323c8d] -> > /usr/bin/doveadm() [0x40f2b9] > > Program received signal SIGABRT, Aborted. > 0x00007ffff73371b5 in raise () from /lib/libc.so.6 > > On Mon, May 14, 2012 at 1:14 PM, Timo Sirainen <tss(a)iki.fi> wrote: > >> On Wed, 2012-05-09 at 10:17 -0300, Danilo Acquaviva wrote: >> > I using dovecot with mdbox and in one account i get this error: >> > >> > doveadm(xxx): Panic: file mail-storage.c: line 787 >> > (mailbox_check_mismatching_separators): assertion failed: >> (strncmp(vname, >> > ns->prefix, ns->prefix_len-1) == 0) >> >> I guess the user has some strange mailbox name. Could you show the >> output of: >> >> find /.../user/mdbox/mailboxes -type d >> >> And also "doveconf -n namespace" output. >> >> >> >

1 0

[Dovecot] Log files
by Chris Lasater 14 May '12

14 May '12

Hi, I just started using Dovecot and was trying to create separate logs instead of using syslog. Is there a way to get the file permission to be something other then root? I have tried the below configuration and it does not seem to change anything. The log process does change to a new user, but it still creates and writes as root. Whenever I test a new setting I delete all the current logs so they will have to be recreated to make sure it does not just keep the previous permissions. I also dont see much documentation on the service log. according to dovecot -a there are a good number of options, but I dont see any information about them. Here are my logging settings below and I am running 2.1.6 and tried on 2.1.5. ### Logging info_log_path = /home/user/dovecot/logs/dovecot_info.log log_path = /home/user/dovecot/logs/dovecot.log debug_log_path = /home/user/dovecot/logs/debug.log service log { user = user unix_listener log-errors { group = user2 mode = 0620 user = user } } Thanks, Chris

2 3

[Dovecot] mailbox_check_mismatching_separators
by Danilo Acquaviva 14 May '12

14 May '12

I using dovecot with mdbox and in one account i get this error: doveadm(xxx): Panic: file mail-storage.c: line 787 (mailbox_check_mismatching_separators): assertion failed: (strncmp(vname, ns->prefix, ns->prefix_len-1) == 0) doveadm(xxx): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x4472a) [0x7fd429a4172a] -> /usr/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x32) [0x7fd429a41812] -> /usr/lib/dovecot/libdovecot.so.0(i_error+0) [0x7fd429a185bf] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_open_stream+0) [0x7fd429d05bb0] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_open+0xf) [0x7fd429d05bcf] -> /usr/lib/dovecot/libdovecot-storage.so.0(mdbox_storage_rebuild_in_context+0xb2b) [0x7fd429cc7e1b] -> /usr/lib/dovecot/libdovecot-storage.so.0(mdbox_sync_begin+0x7ec) [0x7fd429cc5dec] -> /usr/lib/dovecot/libdovecot-storage.so.0(mdbox_sync+0x46) [0x7fd429cc5e56] -> /usr/lib/dovecot/libdovecot-storage.so.0(mdbox_storage_sync_init+0x87) [0x7fd429cc5f37] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x31) [0x7fd429d04781] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync+0x27) [0x7fd429d05297] -> doveadm() [0x4104c7] -> doveadm() [0x40f988] -> doveadm() [0x40fce4] -> doveadm(doveadm_mail_try_run+0x141) [0x410161] -> doveadm(main+0x3a1) [0x416f01] -> /lib/libc.so.6(__libc_start_main+0xfd) [0x7fd4296b9c8d] -> doveadm() [0x40f2b9] The error also occurs with force-resync . The dovecot director version is 2.1.5 . ____________________________________ Danilo Acquaviva

2 1

[Dovecot] mixed MBOX and Maildir format ?
by Frank Bonnet 14 May '12

14 May '12

Hello would it be possible to have mixed formats in Dovecot 2.1.x userland ? I mean MBOX format for INBOXes Maildir format for IMAP folders ( to let users create subfolders ) Thank you

3 6

Re: [Dovecot] Postfix Query
by Tim 14 May '12

14 May '12

user_query = SELECT maildir, mailuser as uid, mailgroup as gid,concat('*:bytes=',quota) as quota_rule FROM virtual_mailbox WHERE username = '%u' and maildir should return example.com/subdomain/tim for this particular user >What does your user_query look like in dovecot-sql.conf.ext? > >On 2012-05-10 17:13, Tim wrote: >> Hello, >> >> Another question!! >> >> Was just trying to sort out mail delivery to subdomains. I set up my >> system so that I have a mail address of tim at subdomain.example.com. >> I've >> sorted out Postfix to correctly identify this and pass on to Dovecot >> for >> delivery but Dovecot doesn't seem to deliver where I want it to. >> Ideally >> I would like to have a structure so that mail is delivered to >> >> /var/mail/example.com/subdomain/user >> >> My users are stored in MySQL and they are being pulled out correctly, >> but dovecot is delivering to >> >> /var/mail/subdomain.example.com/tim >> >> Looking at my logs it seems that the mail location is being picked up >> not being acted on... >> >> May 10 21:51:20 auth(default): Info: master out: USER 1 >> >> tim at subdomain.example.com maildir=example.com/subdomain/tim uid=mailuser >> gid=mailgroup quota_rule=*:bytes=2147483647 >> >> ...a bit further down... >> >> May 10 21:51:20 deliver(tim at subdomain.example.com) Info: auth input: >> maildir=example.com/subdomain/tim >> >> ...then further down it seems to change all of a sudden... >> >> May 10 21:51:20 deliver(tim at subdomain.example.com) Info: maildir: >> data=/var/mail/subdomain.example.com/tim/Maildir >> May 10 21:51:20 deliver(tim at subdomain.example.com) Info: maildir++: >> root=/var/mail/subdomain.example.com/tim/Maildir, index=, control=, >> inbox=/var/mail/subdomain.example.com/tim/Maildir >> >> Bit confused! Any help would be appreciated! >> >> Cheers, >> >> Tim

2 1

[Dovecot] Crash in settings parser (assertion failed: (src_count == ccount))
by Michael Orlitzky 14 May '12

14 May '12

Lutz Schildt posted this to the Gentoo bugzilla recently: http://bugs.gentoo.org/show_bug.cgi?id=415571 There's a backtrace and conf files attached. I was able to find this possibly-related post from a while ago: http://dovecot.org/list/dovecot/2010-September/052963.html

2 1

[Dovecot] dovecot report W value error and Corrupted index cache file
by 甄东宇 14 May '12

14 May '12

Hello everybody, I have a problem and no idea. Yesterday Dovecot.log report: Warning: Fixed a duplicate: /opt/*/cur/<time>.M*.<domain>,S=*,W=*:2,S -> <time>.M*.<domain> Now Dovecot.log report: Error: FETCH [ ] for mailbox INBOX UID 10546 got too little data: 79850 vs 81231 Error: Maildir filename has wrong W value: /opt/DIR/DOMAIN/USER/cur/1281317869.M*.*,S=79569,W=81231:2,S~ Error: Corrupted index cache file /opt/DIR/DOMAIN/USER/dovecot.index.cache: Broken virtual size for mail UID 10546 A few days ago, we used a new machine for mail server (and we used maildir format with dovecot-1.2.0).In fact ,we used iRedmail on CentOS5. And last week, I copy some mail data from old machine to new one through SCP and CP command. It worked well. Yesterday, I copy the mail data from old machine to new one through RSYNC. I guess maybe the errors have a relationship with rsync, because the new machine open SELinux and the rsync data error. Although the files were copyed to /cur directory , it seemed to appear the same mail file. Now,I receive some BLANK mails by pop3 of OutLook2007 . There are not any Header and any Body( Totally BLANK). Outlook show they are 760B size. I am confusing for this problem. Please help me. Thank you.

2 1

[Dovecot] userdb namespace settings bug
by Alexander 'Leo' Bergolth 14 May '12

14 May '12

Hi! Since upgrading to 2.1.6, setting namespaces via environment variables using a imap-postlogin-script *sometimes* doesn't work. Sometimes, the prefix of a namespace isn't set correctly, but is set to an empty string, which leads to the following error: namespace configuration error: Duplicate namespace prefix: "" However, the environment is set correctly, the error seems to occur when parsing the environment. See the attached log: The postlogin-script sets the environment variables attached as dovecot-postlogin-environment.txt. (dumped from postlogin script via env) However, the variable "NAMESPACE/S-GSD/PREFIX=Shared/GSD/" gets parsed as: plugin/namespace/s-gsd/prefix=Shared/GSD/ See the error message: Unknown userdb setting: plugin/namespace/s-gsd/prefix=Shared/GSD/ After restarting dovecot, the same configuration sometimes works correctly. I'd greatly appreciate your help! Unfortunately I have done the upgrade on a production system, so the issue is quite serious for me.. Will downgrading to 2.0 work? (Index-files, etc?) Thanks, --leo -- e-mail ::: Leo.Bergolth (at) wu.ac.at fax ::: +43-1-31336-906050 location ::: IT-Services | Vienna University of Economics | Austria

2 3

[Dovecot] dovecot wants to access my music directory
by Ian Pilcher 14 May '12

14 May '12

I am getting an SELinux error every time dovecot starts, because it is trying to access my music directory (/srv/music). I've read the doveadm-mount man page, and tried: doveadm mount add /srv/music ignore but it didn't make any difference. Now, I certainly didn't tell dovecot to access this directory, so how can I tell it *not* to do so. This is dovecot-2.1.6-2.fc17.x86_64 on Fedora 17 Beta, BTW. Thanks! -- ======================================================================== Ian Pilcher arequipeno(a)gmail.com "If you're going to shift my paradigm ... at least buy me dinner first." ========================================================================

4 4

[Dovecot] dovecot-2.1.6: why are loglines longer and longer
by Reindl Harald 13 May '12

13 May '12

do we really need "session=<ugAua+i/ewBUcit1>" additional to proxy log-lines? until this change it was possible on a 24" screen with "tail -f /var/log/maillog" to watch without linebreaks, now each proxy line breaks PLEASE reconsider such changes! May 13 12:27:38 mail dovecot: imap-login: proxy(*******(a)thelounge.net): started proxying to 127.0.0.1:143: user=<********(a)thelounge.net>, method=PLAIN, rip=********, lip=******, TLS, session=<ugAua+i/ewBUcit1>

2 1

[Dovecot] Non void function static int services_verify_systemd(struct service_list *service_list) doesn't return value at the end
by Joop Boonen 13 May '12

13 May '12

Hi All, Non void function static int services_verify_systemd(struct service_list *service_list) doesn't return value at the end I think this has been forgotten. Regards, Joop. I've attached a patch.

1 0

[Dovecot] index IO patterns
by Cor Bosman 12 May '12

12 May '12

Hey all, we're in the process of checking out alternatives to our index storage. We're currently storing indexes on a NetApp Metrocluster which works fine, but is very expensive. We're planning a few different setups and doing some actual performance tests on them. Does anyone know some of the IO patterns of the indexes? For instance: - mostly random reads or linear reads/writes? - average size of reads and writes? - how many read/writes on average for a specific mailbox size? Anyone do any measurements of this kind? Alternatively, does anyone have any experience with other redundant storage options? Im thinking things like MooseFS, DRBD, etc? regards, Cor

5 10

[Dovecot] Quota, message is never send?
by Luuk＠dovecot 12 May '12

12 May '12

I think i have quota setup correctly, but finally time arrived to check that ;) opensuse:/etc/dovecot # doveadm quota get -u luuk Quota name Type Value Limit % User quota STORAGE 571973 716800 79 User quota MESSAGE 45555 - 0 It seems i am at 79% of my quota so, i added a line to conf.d/90-quota.conf, to get a wraning when quota exceeds 10%: .... plugin { quota_warning = storage=95%% /usr/local/bin/quota-warning.sh 95 %u quota_warning2 = storage=90%% /usr/local/bin/quota-warning.sh 90 %u quota_warning3 = storage=10%% /usr/local/bin/quota-warning.sh 10 %u } .... But this message is never send, what am i missing (in my config)? Below is some info from a debug.log: 2012-05-12 10:40:51 imap(luuk): Debug: Effective uid=1000, gid=100, home=/home/luuk 2012-05-12 10:40:51 imap(luuk): Debug: Quota root: name=User quota backend=maildir args= 2012-05-12 10:40:51 imap(luuk): Debug: Quota rule: root=User quota mailbox=* bytes=734003200 messages=0 2012-05-12 10:40:51 imap(luuk): Debug: Quota warning: bytes=697303040 (95%) messages=0 reverse=no command=/usr/local/bin/quota-warning.sh 95 luuk 2012-05-12 10:40:51 imap(luuk): Debug: Quota warning: bytes=660602880 (90%) messages=0 reverse=no command=/usr/local/bin/quota-warning.sh 90 luuk 2012-05-12 10:40:51 imap(luuk): Debug: Quota warning: bytes=73400320 (10%) messages=0 reverse=no command=/usr/local/bin/quota-warning.sh 10 luuk 2012-05-12 10:40:51 imap(luuk): Debug: maildir++: root=/home/luuk/Maildir, index=, control=, inbox=/home/luuk/Maildir, alt=

4 15

[Dovecot] /var/run/dovecot folder gets deleted on server reboot? ubuntu 10.10
by jacques 11 May '12

11 May '12

Hi After rebooting my server connections to the mail system set up there failed - on closer inspection no dovecot process was running or got started. When running as root /usr/share/sbin/dovecot -c /etc/dovecot/dovecot.conf got error on console /var/run/dovecot/auth-master could not be opened and found no /var/run/dovecot folder!. Is there better script to place in /etc/init.c/ to start dovecot (which will not fail silently?) Any idea what would remove the folder on ubuntu 10.10, running dovecot 2.1.5 and postfix 2.1.7? Any suggestions? Jacques

3 3

[Dovecot] Postfix Query
by Tim 11 May '12

11 May '12

Hello, Another question!! Was just trying to sort out mail delivery to subdomains. I set up my system so that I have a mail address of tim(a)subdomain.example.com. I've sorted out Postfix to correctly identify this and pass on to Dovecot for delivery but Dovecot doesn't seem to deliver where I want it to. Ideally I would like to have a structure so that mail is delivered to /var/mail/example.com/subdomain/user My users are stored in MySQL and they are being pulled out correctly, but dovecot is delivering to /var/mail/subdomain.example.com/tim Looking at my logs it seems that the mail location is being picked up not being acted on... May 10 21:51:20 auth(default): Info: master out: USER 1 tim(a)subdomain.example.com maildir=example.com/subdomain/tim uid=mailuser gid=mailgroup quota_rule=*:bytes=2147483647 ...a bit further down... May 10 21:51:20 deliver(tim(a)subdomain.example.com): Info: auth input: maildir=example.com/subdomain/tim ...then further down it seems to change all of a sudden... May 10 21:51:20 deliver(tim(a)subdomain.example.com): Info: maildir: data=/var/mail/subdomain.example.com/tim/Maildir May 10 21:51:20 deliver(tim(a)subdomain.example.com): Info: maildir++: root=/var/mail/subdomain.example.com/tim/Maildir, index=, control=, inbox=/var/mail/subdomain.example.com/tim/Maildir Bit confused! Any help would be appreciated! Cheers, Tim

2 1

[Dovecot] Converting Dovecot.conf file from Dovecot 1.x to Dovecot 2.x (Dovecot configured with work with MySQL and Postfix)
by Femi Ajayi 10 May '12

10 May '12

Hi Freelancers, I want to convert this Dovecot configuration file for Dovecot 1.x to a dovecot file for Dovecot 2.x ============================= /etc/dovecot.conf ================================ protocols = imap imaps pop3 pop3s log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/home/vmail/%d/%n/Maildir ssl_cert_file = /etc/pki/dovecot/certs/dovecot.pem ssl_key_file = /etc/pki/dovecot/private/dovecot.pem namespace private { separator = . prefix = INBOX. inbox = yes } protocol lda { log_path = /home/vmail/dovecot-deliver.log auth_socket_path = /var/run/dovecot/auth-master postmaster_address = postmaster(a)example.com } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } auth default { user = root passdb sql { args = /etc/dovecot-sql.conf } userdb static { args = uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = vmail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } =========================================================================== I run CentOS 6 on my server and I am trying to get my Dovecot to work with MySQL and Postfix to handle multiple virtual domains/users. I am currenty following the instructions here: http://library.linode.com/email/postfix/dovecot-mysql-centos-5 but the instructions are for Dovecot 1.x. Thanks in advance.

3 2

[Dovecot] Request for help with dovecot.conf file: configured to work with MySQL and Postfix.
by Femi Ajayi 10 May '12

10 May '12

Greetings, I have CentOS 6.2 running on our server with a VPS provider (Linode.com) I need to configure Postfix, dovecot, MySQL to work for virtual domains (multiple domains on our server). The only instructions for setting up Email with Postfix, Dovecot and MySQL my host provides is for the configuration on CentOS 5 which is here: http://library.linode.com/email/postfix/dovecot-mysql-centos-5 , I followed it for the installation/configuration of Email with Postfix, Dovecot and MySQL on our CentOS 6.2 Everything seemed to work fine until I got to the editing of the dovecot.conf file. The guide on the Linode Library provides instructions for Dovecot 1.x, while the newer versions of CentOS (CentOS 6) , apparently use Dovecot 2.x. The config file format has changed, so the one in the guide is no longer applicable, and as a result, I got a errors.. I would therefore appreciate it greatly if someone with a copy of the Dovecot 2.x dovecot.conf file configured to work with MySQL and Postfix (for handling mails for multiple domains) could share it with me. You could get a better understanding of the problem if you take some time to look at the instructions I followed so far: http://library.linode.com/email/postfix/dovecot-mysql-centos-5 ..and also the forums where I had previously sought help: http://forum.linode.com/viewtopic.php?p=50603#50603 http://www.linuxquestions.org/questions/showthread.php?p=4672839#post4672839 Thanks in anticipation of your help.

3 2

[Dovecot] Thunderbird log-in --->Authentication failed - password in uppercase in log files
by jacques 10 May '12

10 May '12

Hi I use dovecot 2.1.5 with postfix, amavis, spamassasin, mysql, virtual domains only. Dovecot being used for SASL authentication, and delivery. When I connect via telnet to port 25 or with smtp and try to do auth plain with mmencode connection string authentication works fine. I can send and recieve messages, and relay works as well. Trying to set up thunderbird to connect to this server I get problems - seems as if the password is resolved proper from the database (use postfixadmin), but then compares an upper case version of my password in the MD5-CRYPT() call to the password string obtained from the database. I do see the base64 encoded connection string in dovecot log though. Any ideas? extract from /var/log/dovecot.log: 345 resp=AHRlc3RAZWF0cmlnaHQtYmVoZWFsdGh5LmNvbQBURVNURVI= 2012-05-09 09:55:03 auth-worker(19577): Debug: sql(test(a)eatright-behealthy.com,4 1.48.226.1): query: SELECT password FROM mailbox WHERE username = 'test@eatright -behealthy.com' 2012-05-09 09:55:03 auth-worker(19577): Info: sql(test(a)eatright-behealthy.com,41 .48.226.1): Password mismatch 2012-05-09 09:55:03 auth-worker(19577): Debug: sql(test(a)eatright-behealthy.com,4 1.48.226.1): MD5-CRYPT(TESTER) != '$1$5224e6b6$bmc53Tpz2h3nknBCq/emc/' 2012-05-09 09:55:05 auth: Debug: client out: FAIL 3 user=test@eatrig ht-behealthy.com 2012-05-09 09:55:05 imap-login: Info: Disconnected (auth failed, 3 attempts in 1 5 secs): user=<test(a)eatright-behealthy.com>, method=PLAIN, rip=41.48.226.1, lip= 216.144.nnn.125, TLS 2012-05-09 10:01:52 auth: Debug: Loading modules from directory: /usr/local/lib/ dovecot/auth 2012-05-09 10:01:52 auth: Debug: auth client connected (pid=31830) The password should be 'tester' - not 'TESTER' dovecot -n output: # 2.1.5: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-274.el5.028stab093.2 x86_64 Ubuntu 10.10 simfs auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login auth_verbose = yes default_login_user = root first_valid_uid = 150 listen = * log_path = /var/log/dovecot.log log_timestamp = "%Y-%m-%d %H:%M:%S " login_greeting = Dovecot ready :-) mail_debug = yes mail_gid = vmail mail_location = maildir:/home/vmail/%d/%n/Maildir:INDEX=/home/vmail/%d/%n/Maildir/indexes mail_privileged_group = mail mail_uid = 150 passdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } protocols = imap pop3 service auth { unix_listener /var/run/dovecot/auth-master { mode = 0600 user = vmail } unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = root } service imap-login { chroot = login user = dovecot } service pop3-login { chroot = login user = dovecot } ssl_cert = </etc/ssl/certs/ssl-mail.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = </etc/ssl/private/ssl-mail.key userdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } userdb { args = uid=150 gid=150 home=/home/vmail/%d/%u allow_all_users=yes driver = static } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { auth_socket_path = /var/run/dovecot/auth-master deliver_log_format = msgid=%m: %$ log_path = /home/vmail/dovecot-deliver.log postmaster_address = postmaster quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } protocol imap { mail_max_userip_connections = 10 } Please help if you can!

2 2

[Dovecot] BODYSTRUCTURE bug?
by A.L.E.C 10 May '12

10 May '12

Hi! I've found a bug in Content-Type parsing. It's old instance of dovecot 1.1. Maybe fixed in newer versions. I have a mail with header: Content-Type: multipart/signed; boundary="------------080705010808010608030700"; protocol="application/x-pkcs7-signature";micalg="SHA1" and it works, but when the boundary is in different order Content-Type: multipart/signed; protocol="application/x-pkcs7-signature";micalg="SHA1"; boundary="------------080705010808010608030700" dovecot returns wrong BODYSTRUCTURE: ("text" "plain" ("charset" "us-ascii") NIL NIL "7bit" 226233 2955 NIL NIL NIL NIL) If this has been fixed, in which version? -- Aleksander 'A.L.E.C' Machniak LAN Management System Developer [http://lms.org.pl] Roundcube Webmail Developer [http://roundcube.net] --------------------------------------------------- PGP: 19359DC1 @@ GG: 2275252 @@ WWW: http://alec.pl

2 9

[Dovecot] Enforcing Dovecot Quotas
by tcsmith1978 10 May '12

10 May '12

Hello, I have been looking at enforcing quotas for users of my mail system (postfix and Dovecot v1.2). Have tried to follow a few tuts on the web but its not having the desired effect. Essentially I can still send and receive mail on an account that I believe has had its quota exceeded. In my main.cf, I have: userdb sql { args = /etc/dovecot/mysql/dovecot-mysql.conf } passdb sql { args = /etc/dovecot/mysql/dovecot-mysql.conf } and... protocol lda { mail_plugins = quota } protocol imap { mail_plugins = quota imap_quota } plugin { quota_exceeded_message = You have exceeded the maximum quota for your mailbox } the dovecot sql (mysql) file has the following query for pulling out user ids and quotas etc: user_query = SELECT maildir, mymailuser as uid, mymailgroup as gid,concat('maildir:storage=',quota) as quota FROM virtual_mailbox WHERE username = '%u' I have set one of my users to have a quota of 1 (so one byte I believe) so it should be over the limit pretty much immediately. Looking at the logs I can see that the system is picking up on the quota limit but doesn't seem to enforce it. Apr 27 10:29:02 deliver(test(a)testdomain.com): Info: auth input: quota=maildir:storage=1 Apr 27 10:29:02 deliver(test(a)testdomain.com): Info: Quota root: name=storage=1 backend=maildir args= Any ideas? Am i missing something? -- View this message in context: http://old.nabble.com/Enforcing-Dovecot-Quotas-tp33763561p33763561.html Sent from the Dovecot mailing list archive at Nabble.com.

3 3

[Dovecot] Thunderbird STARTTLS error
by Markus Fritz 09 May '12

09 May '12

Hello, the error is still present: May 8 19:47:18 opsys dovecot: imap-login: Disconnected (no auth attempts): rip=82.113.119.140, lip=78.46.216.126 Whenever I start a session with openssl to STARTTTL (Server: mail.opsys.de) the handshake is successfull. Also I am able to login to my account via 1 login. In Thunderbird port 993 for SSL/TLS works correct, only STARTTLS on port 143 isn't working properly. The cert is Class 1 and signed by StartCom Ltd.. Dovecot.conf (for viewable reasons of this mail pasted): http://pastie.org/private/bmrymyuo16ohzxdahf0nq And here openssl output: http://pastie.org/private/3rpgll2s7hblev9ozpcq8w Note the 'Verify return code: 21 (unable to verify the first certificate)' in the output... Thanks for helping, I am working on this problem since 3 days. Kind regards Markus Fritz

4 13

[Dovecot] lmtp_save_to_detail_mailbox not working?
by Oscar del Rio 09 May '12

09 May '12

Dovecot 2.1.6, with lmtp_save_to_detail_mailbox=yes recipient_delimiter=+ messages addressed to "user+detail@domain" are always delivered to INBOX regardless if "detail" mailbox already exists or lda_mailbox_autocreate=yes. Anything else needed to enable lmtp_save_to_detail_mailbox feature? Thanks, Oscar

2 2

[Dovecot] dovecot and systemd
by Michal Hlavinka 09 May '12

09 May '12

Hi all, dovecot supports systemd socket activation. Together with standard unit activation (like old sysv init script), there are two ways how to configure dovecot(only interface:port, not whole configuration). This can result in situation where those configurations does not say the same. Question is what should happen then? For example, lets have dovecot configured to listen for imap(s) and lets have systemd dovecot socket configured to listen for all protocols - pop3(s) and imap(s). When dovecot is configured to start on boot, systemd will start it and dovecot will listen on imap(s) ports. But when dovecot.socket is enabled, it'll listen on pop3(s) too and when new pop3 connection comes, it'll pass it to dovecot and dovecot will serve it. The question is: Should this happen? What exactly should happen when dovecot.conf does not match dovecot.socket configuration? Michal

2 6

[Dovecot] acls not copied when creating subfolder of private INBOX
by Andreas Helmcke 09 May '12

09 May '12

Using brand new dovecot 2.1.5 I still have a problem with the inheritance of acls. Setting: - maildir with private INBOX and public folders. - users maildir directory (/home/mail/user/ahelmcke) contains dovecot-acl file - public folders root directory (/home/mail/Fax) contains dovecot-acl file When creating a subfolder of the public folder the dovecot-acl files gets copied to the subfolders directory as expected. When creating a subfolder of the users INBOX the dovecot-acl files does /not/ get copied to the subfolders directory. Debug output: doveadm -Dv mailbox create -u ahelmcke Fax/Buhhhh doveadm(root): Debug: Loading modules from directory: /usr/local/lib/dovecot doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/lib01_acl_plugin.so doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/local/lib/dovecot/doveadm doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_lookup (this is usually intentional, so just ignore this message) doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib10_doveadm_zlib_plugin.so: undefined symbol: i_stream_create_deflate (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_list_backend (this is usually intentional, so just ignore this message) doveadm(ahelmcke): Debug: auth input: ahelmcke quota_rule=*:storage=2000M doveadm(ahelmcke): Debug: Added userdb setting: plugin/quota_rule=*:storage=2000M doveadm(ahelmcke): Debug: Effective uid=494, gid=491, home=/home/mail/user/ahelmcke doveadm(ahelmcke): Debug: Quota root: name=User quota backend=maildir args= doveadm(ahelmcke): Debug: Quota rule: root=User quota mailbox=* bytes=2097152000 messages=0 doveadm(ahelmcke): Debug: Namespace inbox: type=private, prefix=INBOX/, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/home/mail/user/ahelmcke doveadm(ahelmcke): Debug: maildir++: root=/home/mail/user/ahelmcke, index=, control=, inbox=/home/mail/user/ahelmcke, alt= doveadm(ahelmcke): Debug: acl: initializing backend with data: vfile doveadm(ahelmcke): Debug: acl: acl username = ahelmcke doveadm(ahelmcke): Debug: acl: owner = 1 doveadm(ahelmcke): Debug: acl vfile: Global ACL directory: (none) doveadm(ahelmcke): Debug: Namespace dummy: type=private, prefix=, sep=/, inbox=no, hidden=yes, list=no, subscriptions=yes location=maildir:/home/mail/user/ahelmcke/public/ doveadm(ahelmcke): Debug: maildir++: root=/home/mail/user/ahelmcke/public, index=, control=, inbox=, alt= doveadm(ahelmcke): Debug: acl: initializing backend with data: vfile doveadm(ahelmcke): Debug: acl: acl username = ahelmcke doveadm(ahelmcke): Debug: acl: owner = 1 doveadm(ahelmcke): Debug: acl vfile: Global ACL directory: (none) doveadm(ahelmcke): Debug: Namespace fax: type=public, prefix=Fax/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=no location=maildir:/home/mail/Fax:INDEX=/home/mail/user/ahelmcke/SEEN.Fax doveadm(ahelmcke): Debug: maildir++: root=/home/mail/Fax, index=/home/mail/user/ahelmcke/SEEN.Fax, control=, inbox=, alt= doveadm(ahelmcke): Debug: acl: initializing backend with data: vfile doveadm(ahelmcke): Debug: acl: acl username = ahelmcke doveadm(ahelmcke): Debug: acl: owner = 0 doveadm(ahelmcke): Debug: acl vfile: Global ACL directory: (none) doveadm(ahelmcke): Debug: acl vfile: reading file /home/mail/Fax/dovecot-acl doveadm(ahelmcke): Debug: Namespace Fax/: Using permissions from /home/mail/Fax: mode=0700 gid=-1 doveadm(ahelmcke): Debug: Namespace INBOX/: Using permissions from /home/mail/user/ahelmcke: mode=0700 gid=-1 doveadm(ahelmcke): Debug: acl vfile: reading file /home/mail/user/ahelmcke/dovecot-acl doveadm(ahelmcke): Debug: acl vfile: reading file /home/mail/user/ahelmcke/dovecot-acl doveadm(ahelmcke): Debug: acl vfile: reading file /home/mail/user/ahelmcke/dovecot-acl doveadm(ahelmcke): Debug: Namespace Fax/: /home/mail/Fax/.Buhhhh doesn't exist yet, using default permissions doveadm(ahelmcke): Debug: Namespace Fax/: Using permissions from /home/mail/Fax: mode=0700 gid=-1 doveadm(ahelmcke): Debug: acl vfile: reading file /home/mail/Fax/dovecot-acl doveadm(ahelmcke): Debug: acl vfile: file /home/mail/Fax/.Buhhhh/dovecot-acl not found doveadm(ahelmcke): Debug: acl vfile: reading file /home/mail/Fax/.Buhhhh/dovecot-acl doveadm(ahelmcke): Debug: acl vfile: reading file /home/mail/user/ahelmcke/dovecot-acl doveadm(ahelmcke): Debug: acl vfile: reading file /home/mail/Fax/.Buhhhh/dovecot-acl doveadm(ahelmcke): Debug: acl vfile: reading file /home/mail/Fax/.Buhhhh/dovecot-acl doveadm(ahelmcke): Debug: acl vfile: reading file /home/mail/user/ahelmcke/dovecot-acl doveadm(ahelmcke): Debug: acl vfile: reading file /home/mail/Fax/.Buhhhh/dovecot-acl doveadm(ahelmcke): Debug: acl vfile: reading file /home/mail/Fax/.Buhhhh/dovecot-acl doveadm(ahelmcke): Debug: acl vfile: reading file /home/mail/user/ahelmcke/dovecot-acl doveadm -Dv mailbox create -u ahelmcke INBOX/Buhhhh doveadm(root): Debug: Loading modules from directory: /usr/local/lib/dovecot doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/lib01_acl_plugin.so doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/local/lib/dovecot/doveadm doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_lookup (this is usually intentional, so just ignore this message) doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib10_doveadm_zlib_plugin.so: undefined symbol: i_stream_create_deflate (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_list_backend (this is usually intentional, so just ignore this message) doveadm(ahelmcke): Debug: auth input: ahelmcke quota_rule=*:storage=2000M doveadm(ahelmcke): Debug: Added userdb setting: plugin/quota_rule=*:storage=2000M doveadm(ahelmcke): Debug: Effective uid=494, gid=491, home=/home/mail/user/ahelmcke doveadm(ahelmcke): Debug: Quota root: name=User quota backend=maildir args= doveadm(ahelmcke): Debug: Quota rule: root=User quota mailbox=* bytes=2097152000 messages=0 doveadm(ahelmcke): Debug: Namespace inbox: type=private, prefix=INBOX/, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/home/mail/user/ahelmcke doveadm(ahelmcke): Debug: maildir++: root=/home/mail/user/ahelmcke, index=, control=, inbox=/home/mail/user/ahelmcke, alt= doveadm(ahelmcke): Debug: acl: initializing backend with data: vfile doveadm(ahelmcke): Debug: acl: acl username = ahelmcke doveadm(ahelmcke): Debug: acl: owner = 1 doveadm(ahelmcke): Debug: acl vfile: Global ACL directory: (none) doveadm(ahelmcke): Debug: Namespace dummy: type=private, prefix=, sep=/, inbox=no, hidden=yes, list=no, subscriptions=yes location=maildir:/home/mail/user/ahelmcke/public/ doveadm(ahelmcke): Debug: maildir++: root=/home/mail/user/ahelmcke/public, index=, control=, inbox=, alt= doveadm(ahelmcke): Debug: acl: initializing backend with data: vfile doveadm(ahelmcke): Debug: acl: acl username = ahelmcke doveadm(ahelmcke): Debug: acl: owner = 1 doveadm(ahelmcke): Debug: acl vfile: Global ACL directory: (none) doveadm(ahelmcke): Debug: Namespace fax: type=public, prefix=Fax/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=no location=maildir:/home/mail/Fax:INDEX=/home/mail/user/ahelmcke/SEEN.Fax doveadm(ahelmcke): Debug: maildir++: root=/home/mail/Fax, index=/home/mail/user/ahelmcke/SEEN.Fax, control=, inbox=, alt= doveadm(ahelmcke): Debug: acl: initializing backend with data: vfile doveadm(ahelmcke): Debug: acl: acl username = ahelmcke doveadm(ahelmcke): Debug: acl: owner = 0 doveadm(ahelmcke): Debug: acl vfile: Global ACL directory: (none) doveadm(ahelmcke): Debug: Namespace INBOX/: /home/mail/user/ahelmcke/.Buhhhh doesn't exist yet, using default permissions doveadm(ahelmcke): Debug: Namespace INBOX/: Using permissions from /home/mail/user/ahelmcke: mode=0700 gid=-1 doveconf -n # 2.1.5: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.7.1.el6.x86_64 x86_64 CentOS release 6.2 (Final) ext4 auth_master_user_separator = * auth_verbose = yes first_valid_uid = 400 mail_debug = yes mail_gid = vmail mail_home = /home/mail/user/%u mail_location = maildir:/home/mail/user/%u mail_plugins = " quota acl" mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mbox_write_locks = fcntl namespace dummy { alias_for = INBOX/ hidden = yes list = no location = maildir:/home/mail/user/%u/public/ prefix = separator = / type = private } namespace fax { location = maildir:/home/mail/Fax:INDEX=/home/mail/user/%u/SEEN.Fax prefix = Fax/ separator = / subscriptions = no type = public } namespace inbox { inbox = yes location = prefix = INBOX/ separator = / type = private } passdb { args = /etc/dovecot/passwd.masterusers driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } plugin { acl = vfile acl_shared_dict = file:/home/mail/shared-mailboxes quota = maildir:User quota quota_rule = *:storage=3G sieve = /home/mail/user/%u/sieve.active sieve_dir = /home/mail/user/%u/sieve.scripts } protocols = imap lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { mode = 0600 user = vmail } } service imap-login { inet_listener imap { address = * } inet_listener imaps { address = * } } service managesieve-login { inet_listener sieve { address = * port = 4190 } } ssl = required ssl_cert = </etc/pki/dovecot/certs/mail.ela-soft.com.crt ssl_key = </etc/pki/dovecot/private/mail.ela-soft.com.2048bit.nopp.key userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } protocol lda { mail_plugins = " quota acl sieve" } protocol imap { mail_plugins = " quota acl imap_quota imap_acl" } protocol lmtp { mail_plugins = " quota acl sieve" }

3 6

[Dovecot] Client got empty email from dovecot
by Lori Seda 09 May '12

09 May '12

Hi, I built a mail server with qmail + vpopmail + dovecot , the qmail and vpopmail worked well, until the dovecot was installed. Client always get empty email, I have try some solutions from google, neither of then can solve the problem. Here is the detailed information of logs, version, and output of 'dovecot -n', please help, thanks. Lori *Log:* May 9 14:16:23 mail dovecot: pop3-login: Login: user=<user1(a)site1.com>, method=PLAIN, rip=111.14.98.135, lip=10.247.108.189, mpid=23467, session=<VCJGcZS/FQBvDmKH> May 9 14:16:25 mail dovecot: pop3(user1(a)site1.com): Error: Cached message size larger than expected (575 > 61) May 9 14:16:25 mail dovecot: pop3(user1(a)site1.com): Error: Maildir filename has wrong S value, renamed the file from /home/vpopmail/domain_dir/ site1.com/sunl/Maildir/cur/1336544158.23459.mail.site1.com,S=575:2, to /home/vpopmail/domain_dir/ site1.com/sunl/Maildir/cur/1336544158.23459.mail.site1.com,S=61:2, May 9 14:16:25 mail dovecot: pop3(user1(a)site1.com): Error: Corrupted index cache file /home/vpopmail/domain_dir/ site1.com/sunl/Maildir/dovecot.index.cache: Broken physical size for mail UID 1 May 9 14:16:25 mail dovecot: pop3(user1(a)site1.com): Error: Cached message size larger than expected (575 > 61) May 9 14:16:25 mail dovecot: pop3(user1(a)site1.com): Error: Corrupted index cache file /home/vpopmail/domain_dir/ site1.com/sunl/Maildir/dovecot.index.cache: Broken physical size for mail UID 1 May 9 14:16:25 mail dovecot: pop3(user1(a)site1.com): Error: read(/home/vpopmail/domain_dir/ site1.com/sunl/Maildir/cur/1336544158.23459.mail.site1.com,S=575:2,) failed: Input/output error (uid=1) May 9 14:16:25 mail dovecot: pop3(user1(a)site1.com): Disconnected: Logged out top=0/0, retr=1/78, del=0/1, size=63 *Version:* [root]vpopmail# dovecot --version *2.1.6* dovecot -n: [root]vpopmail# dovecot -n # 2.1.6: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.18-164.el5 x86_64 Red Hat Enterprise Linux Server release 5.4 (Tikanga) ext3 auth_cache_size = 10 M auth_default_realm = site1.com auth_mechanisms = plain login cram-md5 auth_socket_path = /usr/local/var/run/dovecot/auth-userdb default_internal_user = vpopmail default_login_user = vpopmail disable_plaintext_auth = no first_valid_uid = 516 hostname = mail.site1.com last_valid_uid = 516 listen = * mail_access_groups = 516 mail_gid = 513 mail_location = maildir:/home/vpopmail/domain_dir/%d/%n/Maildir/ mail_privileged_group = 513 mail_uid = 516 namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = cache_key=%u webmail=127.0.0.1 driver = vpopmail } postmaster_address = postmaster(a)site1.com protocols = imap pop3 sendmail_path = /var/qmail/bin/sendmail service auth-worker { user = $default_internal_user } service auth { unix_listener auth-userdb { group = vchkpw mode = 0666 user = vpopmail } user = $default_internal_user } service imap-login { inet_listener imaps { ssl = yes } } service pop3-login { inet_listener pop3s { ssl = yes } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = quota_template=quota_rule=*:backend=%q driver = vpopmail } protocol lda { mail_plugins = } protocol imap { mail_plugins = } protocol pop3 { mail_plugins = }

1 1

Re: [Dovecot] Dovecot for POP3S proxying
by Gilles Albusac 09 May '12

09 May '12

Dovecot is installed but actually I just use auth module (for postfix authentication). In your dovecot.conf example, I don't see the "proxy" command ? Could you give me a few more details on the "proxy" command usage (ExtraFields/Proxy is not clear for me)? Regards -----Message d'origine----- From: David Jonas Sent: Thursday, May 03, 2012 8:04 PM To: Gilles Albusac Subject: Re: [Dovecot] Dovecot for POP3S proxying On Thu May 3 05:14:40 2012, Gilles Albusac wrote: > Dovecot is already installed in my architecture and I just would like > to know how to configure Dovecot for POP3S proxying with authentication. > > For security reasons I prefer to install as little as possible binary > (see vulnerability 2011 - remote exploit - STUNNEL). If you already have dovecot running in proxy mode it's easy to add pop3s. If not, see http://wiki2.dovecot.org/PasswordDatabase/ExtraFields/Proxy See http://wiki2.dovecot.org/Services search the page for pop3s. A simple example: ssl = yes ssl_cert = </etc/dovecot/dovecot.pem ssl_key = </etc/dovecot/dovecot.pem service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } Of course there is a lot more SSL tuning that can be done: http://wiki2.dovecot.org/SSL/DovecotConfiguration > -----Message d'origine----- From: David Jonas > Sent: Wednesday, May 02, 2012 10:29 PM > To: Gilles Albusac > Cc: dovecot(a)dovecot.org > Subject: Re: [Dovecot] Dovecot for POP3S proxying > > On Wed May 2 06:41:00 2012, Gilles Albusac wrote: >> I would like to configure Dovecot for POP3S proxying all users from >> the Internet to the internal Exchange Mail Server. > > Unless I'm missing something with your request, you don't need dovecot. > Any ssl proxy can do that for you, such as stunnel > (http://www.stunnel.org/) We use the hardware ssl termination on our > load balancers for pop3s, imaps, and smtps.

3 4

[Dovecot] IMAP NOTIFY extension
by ashley willis 09 May '12

09 May '12

your work on NOTIFY was brought to my attention, and I see it hasn't been changed in two months, a week after you announced it. a few users and some mail admins have been wanting something like this for k9 mail, which I help develop. what is the current status? is it worth installing and starting work in getting k9 to support it yet? I'd offer help on your end, but I just know java and perl. c code usually confuses me (i keep meaning to learn, but...). thanks! -ashley -- Sent from my Android phone with K-9 Mail. Please excuse my brevity.

2 1

Re: [Dovecot] [exim] Exim / Dovecot and AUTH LOGIN
by Frank Elsner 08 May '12

08 May '12

On Tue, 08 May 2012 19:47:39 +0200 Jonas Eckerman wrote: > On 2012-05-08 15:22, Frank Elsner wrote: > > [About exim authenticating PLAIN and LOGIN against dovecot auth socket] > > > PLAIN Authentication works perfect, LOGIN gives > > > 2012-05-08 15:08:43 login authenticator failed for xxxxxx.tu-berlin.de [130.149.X.YY]: 435 Unable to authenticate at present: authentication socket protocol error > > This is just a guess since I'm not too good at dovecot, but could it be > that you need to set at least "auth_mechanisms = plain login" your in > dovecot config? Yeah, that was it! You made my day! --Frank Elsner

1 0

[Dovecot] [+]: Exim / Dovecot and AUTH LOGIN
by Frank Elsner 08 May '12

08 May '12

On Tue, 8 May 2012 15:22:11 +0200 Frank Elsner wrote: > > Hi to both adressed mailing lists, > > I followed the instructions in http://wiki2.dovecot.org/HowTo/EximAndDovecotSASL Forgot to mention the versions :-( exim 4.77 dovecot 2.1.6 self compiled under Fedora 14. --Frank Elsner

1 0

[Dovecot] dovecot smtp authentication with sendmail
by Hadi Salem 08 May '12

08 May '12

Hi, It’s possible to use sasl dovecot smtp authentication with sendmail ? Hadi.Salem

4 3

[Dovecot] Exim / Dovecot and AUTH LOGIN
by Frank Elsner 08 May '12

08 May '12

Hi to both adressed mailing lists, I followed the instructions in http://wiki2.dovecot.org/HowTo/EximAndDovecotSASL exim.conf: | plain: | driver = dovecot | public_name = PLAIN | server_socket = /var/run/dovecot/auth-client | server_set_id = $auth1 | | login: | driver = dovecot | public_name = LOGIN | server_socket = /var/run/dovecot/auth-client | server_set_id = $auth1 10-master.conf for dovecot: | service auth { | # auth_socket_path points to this userdb socket by default. It's typically | # used by dovecot-lda, doveadm, possibly imap process, etc. Its default | # permissions make it readable only by root, but you may need to relax these | # permissions. Users that have access to this socket are able to get a list | # of all usernames and get results of everyone's userdb lookups. | # unix_listener auth-userdb { | #mode = 0600 | #user = | #group = | # } | | # Exim SMTP AUTH | unix_listener auth-client { | mode = 0660 | user = exim | group = exim | } PLAIN Authentication works perfect, LOGIN gives 2012-05-08 15:08:43 login authenticator failed for xxxxxx.tu-berlin.de [130.149.X.YY]: 435 Unable to authenticate at present: authentication socket protocol error Where is the problem? Kind regards, Frank Elsner

1 0

Re: [Dovecot] Shared namespace
by Daniel L. Miller 08 May '12

08 May '12

On 5/7/2012 6:46 AM, Daniel L. Miller wrote: > On 5/6/2012 8:34 PM, Daniel L. Miller wrote: >> I'm not sure what's triggered it - I THINK it has something to do >> with a force-resync, but not sure. >> >> I'm no longer viewing my full list of shared mailboxes. I used to >> have a number of users shown - they had all had their ACL's set >> individually and were shown in the list. "doveadm acl debug" shows >> they SHOULD be shown - at least I think so, as the output for the >> mailboxes that DO appear is identical for those that don't. >> >> Where should I look for breakage? > > After upgrading to 2.1.6 - mailboxes are back. Not sure I want to TRY > to break it again... > Ok - I broke it again. Tried changing mail_shared_explicit_inbox to no - problem mailboxes disappeared again. Changed back to yes - they came back. Problem with both Thunderbird and Roundcube as clients. -- Daniel

2 9

[Dovecot] courier to dovecot
by Grafibit Rendszergazda 08 May '12

08 May '12

Dear All, I know there were many threads on this topic. I was searching the archive and the net also, but did not find a solution on my problem. I hope you can help me. I am migrating from an old server using courier to a new server with dovecot and i can not manage to have the same uids after the migration. After copying the message files from the old server to the new, and executing the script from the wiki page the messages are still re-downloaded by the mail clients. After telnet and logging in to the old server port 110, I got the following on the command *uidl*: 1 UID377-1278276092 2 UID387-1278276092 3 UID394-1278276092 4 UID498-1278276092 5 UID499-1278276092 6 UID564-1278276092 On the new server i set up the *pop3_uidl_format = UID%u-%v* because it seems for me that the old server is using the same uidl format. Either if i execute the /./courier-dovecot-migrate.pl --to-dovecot --recursive --convert /command or i don't the uidls on the new server won't be the same. Both the %u and %v numbers are differ. Please give me any hints how to continue the investigation to have a successful migration. Thank you in advance, Tamás * dovecot -n* # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-0.bpo.2-amd64 x86_64 Debian 6.0.4 protocols: imap imaps pop3 pop3s managesieve ssl_cert_file: /var/lib/dtc/etc/ssl/dovecot/new.cert.cert ssl_key_file: /var/lib/dtc/etc/ssl/dovecot/new.cert.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_location: maildir:%h/Maildir mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve pop3_uidl_format: UID%u-%v managesieve_logout_format(default): bytes=%i/%o managesieve_logout_format(imap): bytes=%i/%o managesieve_logout_format(pop3): bytes=%i/%o managesieve_logout_format(managesieve): bytes ( in=%i : out=%o ) namespace: type: private separator: . prefix: INBOX. inbox: yes list: yes subscriptions: yes lda: postmaster_address: mail(a)exemple.com mail_plugin_dir: /usr/lib/dovecot/modules/lda auth_socket_path: /var/run/dovecot-auth-master log_path: /var/log/sieve.log info_log_path: /var/log/sieve.info mail_plugins: sieve quota auth default: passdb: driver: sql args: /var/lib/dtc/etc/dovecot-mysql.conf userdb: driver: prefetch userdb: driver: sql args: /var/lib/dtc/etc/dovecot-mysql.conf socket: type: listen client: path: /var/run/dovecot/dovecot-auth-client mode: 438 master: path: /var/run/dovecot-auth-master mode: 384 user: dtc plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve quota: maildir

3 3

Re: [Dovecot] Upgrading known problems (2.0 to 2.1) ?
by Timo Sirainen 08 May '12

08 May '12

Yes, that's possible. The IMAP/POP3 servers behind Dovecot director wouldn't even need to be Dovecots at all. Although you really want to use v2.1 director since it has a lot of fixes compared to v2.0. On 8.5.2012, at 0.02, Jean Michel wrote: > Thanks, an other thing is that I didnt saw anything about a cenario like this, its possible to have a director working on 2.0 and a backend with 2.1 simultaneously and vice-versa? > > 2012/5/7 Timo Sirainen <tss(a)iki.fi> > On 7.5.2012, at 23.21, Jean Michel wrote: > > > Is there any known/possible problem while upgrading from dovecot 2.0 to 2.1 > > ? > > Did anybody had any trouble with this ? > > http://wiki2.dovecot.org/Upgrading/2.1 lists all known problems. > > > > > -- > ------------------------------ > Jean Michel Feltrin >

1 0

[Dovecot] Upgrading known problems (2.0 to 2.1) ?
by Jean Michel 07 May '12

07 May '12

Is there any known/possible problem while upgrading from dovecot 2.0 to 2.1 ? Did anybody had any trouble with this ? ------------------------------ Jean Michel Feltrin

2 1

[Dovecot] dsync with virtual users
by Ken Stevenson 07 May '12

07 May '12

I'm using dovecot v2.0.16

3 3

[Dovecot] Panic in index-sync.c: line 25 on dovecot-1.2.17
by Leon Meßner 07 May '12

07 May '12

Hi, with dovecot-1.2.17 (yes i know it's old) i'm getting the folowing error after doing a system upgrade. May 7 22:04:26 mail dovecot: deliver(elon): Panic: file index-sync.c: line 25 (index_mailbox_set_recent_uid): assertion failed: (seq_range_exists(&ibox->recent_flags, uid)) May 7 22:04:27 mail kernel: pid 79989 (deliver), uid 4873: exited on signal 6 (core dumped) this only happens to one user and only with mail from one mailinglist (this one). Mails do get filtered by sieve. After some delivery attempts the mail finaly gets stored alright in the maildir. May 7 22:23:27 mail dovecot: deliver(elon): sieve: msgid=<assp.047487a390.4FA82AA5.60907 09(a)amfes.com>: stored mail into mailbox 'dovecot' May 7 22:23:27 mail postfix/local[82289]: 7DED511402: to=<elon(a)physik.tu-berlin.de>, orig_to=<l.messner(a)physik.tu-berlin.de>, relay=local, delay=1141, delays=1141/0.01/0/0.26, dsn=2.0.0, status=sent (delivered to command: /usr/local/libexec/dovecot/deliver) May 7 22:23:27 mail postfix/qmgr[1303]: 7DED511402: removed After that a new mail does the same dance (perhaps until the next one to this ML arrives). The maildirs are on NFS and in this case only beeing used with my instance of mutt and two other postfix+dovecot servers which are quite idle. Whats the way to debug this ? Thanks, Leon

2 2

[Dovecot] Proxying for some users and having the rest local?
by Dr Josef Karthauser 07 May '12

07 May '12

I'm migrating a load of mailboxes from cyrus to a new dovecot server. What I'd like to do is to switch the DNS to dovecot, and set things up so that all old imap mailboxes are accessed through the dovecot proxy. That way I can migrate them one at a time independent of DNS issues. I've got a load of users specified in mysql, and that configuration works well for local mailboxes. How do I configure things so that I can switch proxy access on and off? What's I've got so far is: password_query = SELECT user, domain, password, "masteruser" as master, "masterpass" as pass, proxy, "remoteimap.server" as host FROM mailboxes \ WHERE user = '%n' AND isMailbox AND active AND domain = '%d' I imagined that I could switch the proxy per user by setting proxy='n' or proxy=null for any users that want to be local, and proxy='y' for any users that I want to forward on to the original server. It doesn't appear to work that way though. Irrespective of the proxy value dovecot appears to try and proxy all users. What am I doing wrong? I can't work it out from the docs, and the source will take quite a bit of studying to get to the bottom of it all. Thanks :), Joe

2 3