- dovecot - dovecot.org

[Dovecot] UIDPLUS in the wiki
by Peter Mogensen 02 Feb '11

02 Feb '11

Hi, Isn't the stuff in the wiki about UIDPLUS being disabled because of maildir outdated? http://wiki.dovecot.org/FeatUIDPLUS http://wiki2.dovecot.org/FeatUIDPLUS /Peter

3 3

[Dovecot] Logging on syslog and selected dovecot files at the sametime
by Antonio Perez-Aranda 02 Feb '11

02 Feb '11

Is it possible to send logs to syslog and files set by log_path and log_info_path on config? Just two logs at the same time (not realtime). -- Antonio Pérez-Aranda Alcaide aperezaranda(a)yaco.es Yaco Sistemas S.L. http://www.yaco.es/ C/ Rioja 5, 41001 Sevilla Teléfono +34 954 50 00 57 Fax +34 954 50 09 29

2 2

[Dovecot] automated mailbox trimming?
by Monique Y. Mudama 02 Feb '11

02 Feb '11

Hello all, If this is answered in the wiki, I apologize. Please point me to it and I'll be on my way ... This may be more of a MailDir-generic question, except that as I understand it there's some wiggle room in the naming of the message files. I've just switched from an mbox-based mail system to Dovecot with MailDir. With mbox, I used logrotate to keep some of my mailboxes (spam, sent, stuff like that) down to only the most recent messages. What's the best way to go about mailbox trimming with dovecot's implementation of maildir? I was thinking of writing a script to simply move or delete old files, but would I mess up dovecot's expectations for directory/file structure that way? My mail directories are in my user's home directory. I'm fine with writing a script or application (time permitting, of course), but before I do so, is there already a solution out there? In case it's relevant: $ dovecot --version 1.2.15 $ dovecot -n # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.37 x86_64 Debian 6.0 log_timestamp: %Y-%m-%d %H:%M:%S ssl: required login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail mbox_write_locks: fcntl dotlock auth default: passdb: driver: passwd-file args: /etc/dovecot/passwords userdb: driver: passwd userdb: driver: passwd-file args: /etc/dovecot/passwords

4 3

[Dovecot] Plugin delete-to-trash on Dovecot 2.0
by Antonio Perez-Aranda 01 Feb '11

01 Feb '11

There are some body using delete-to-trash on any version of Dovecot 2.0? -- Antonio Pérez-Aranda Alcaide aperezaranda(a)yaco.es Yaco Sistemas S.L. http://www.yaco.es/ C/ Rioja 5, 41001 Sevilla Teléfono +34 954 50 00 57 Fax +34 954 50 09 29

4 8

[Dovecot] Cannot authenticate with new Red Hat/Fedora SHA512
by John Cooper 01 Feb '11

01 Feb '11

RHEL6 and Fedora 14 use an improved password algorithm of SHA512 on a brand new install of the OS (:$6$ in shadow file). cat /etc/shadow user1:$6$<salt>$<password>:15006:0:99999:7::: I cannot get dovecot to authenticate. I've search for a way to change the default algorithm in dovecot and found you should use CRYPT but I don't know what to put in the /etc/dovecot/dovecot.conf or /etc/dovecot/conf.d/* Can this be done or do you need to use an alternate password file with MD5? Thanks, John.

3 5

[Dovecot] cgroup support
by Andreas Pelme 01 Feb '11

01 Feb '11

Hi, I am setting up a system that enforces cgroup restrictions when a user logs in via SSH, and for all the services that are run by a particular user. I am also running dovecot to give users IMAP/POP access to their mailboxes. However, to be part of a cgroup, PIDs must be explicitly added to the cgroup tasks file. So for now, all my processes are run with resource restrictions, except for Dovecot processes. It would be really cool if dovecots child/worker processes could be added the a cgroup in addition to the usual setuid/chroot protections that already exists. Adding a process to a cgroup is a matter of writing the PID to the correct cgroup tasks file. If this were implemented as an extra field in userdb, it could be very powerful, and allow for all kinds of resource management/accounting of dovecot processes. This would obviously not be cross-platform, since cgroups are a feature of the Linux kernel. Would that be a problem? Is support for cgroups something that could be considered for dovecot at all? Are there other ways to put dovecot processes in cgroups? I do not really have a patch or a plan for how everything would work out in detail. If this would be useful for dovecot, I would be happy to start hacking on a patch. Cheers Andreas

3 7

[Dovecot] cross compile dovecot with openssl
by kylixboy 01 Feb '11

01 Feb '11

hello everyone: i can configue dovecot with the following: ./configure --build='i686-pc-linux-gnu' --host='arm-openwrt-linux' --with-ssl=openssl --with-storages=maildir i_cv_epoll_works=yes i_cv_inotify_works=yes i_cv_posix_fallocate_works=yes i_cv_signed_size_t=no i_cv_gmtime_max_time_t=32 i_cv_signed_time_t=yes i_cv_mmap_plays_with_write=yes i_cv_fd_passing=yes i_cv_c99_vsnprintf=yes lib_cv_va_copy=yes lib_cv___va_copy=yes lib_cv_va_val_copy=yes CFLAGS="-gdwarf-2 -msoft-float" CFLAGS="-I/sdk-comcerto-openwrt-6.0/staging_dir/target-arm_glibc-2.7/usr/include" LDFLAGS="-L/sdk-comcerto-openwrt-6.0/staging_dir/target-arm_glibc-2.7/usr/lib" And can compile && make the dovecot binary, but except the following warnings and errors: configure: WARNING: openssl/ssl.h: accepted by the compiler, rejected by the preprocessor! configure: WARNING: openssl/ssl.h: proceeding with the compiler's result configure: WARNING: openssl/err.h: accepted by the compiler, rejected by the preprocessor! configure: WARNING: openssl/err.h: proceeding with the compiler's result configure: WARNING: zlib.h: accepted by the compiler, rejected by the preprocessor! configure: WARNING: zlib.h: proceeding with the compiler's result ./configure: line 22927: /sdk-comcerto-openwrt-6.0/staging_dir/toolchain-arm_gcc-4.1.2_glibc-2.7/usr/bin/rpcgen: cannot execute binary file Sorry about that i want to know why the warnings be happened and how to work out that. Best regards.

1 0

[Dovecot] Permissions issues after dovecot reload
by Matt Rude 01 Feb '11

01 Feb '11

Hello, Today while looking at a different issue (one user couldn't retrieve mail; DNS issue) I set 'mail_debug=yes' then ran `dovecot reload` on our mail server. After running the reload, dovecot started complaning about permission issues with the dict file, and preceded to try to kill it's self. The self reload didn't seem to work, and since this is a production system, I was forced to restart the dovecot service. After the restart of the service, everything seemed to go back to normal. Dovecot is currently working as expected, no other permission errors in the logs. Dovecot Version: 2.0.9 (3582271a897e) running on Fedora 14 running with a mySQL setup including dict tables (quota, expire). The virtual user's mail has a local user and group id of 1000. Below is the expert from the log: Jan 25 18:00:01 milly postfix/smtpd[9418]: connect from odin.example.com[174.143.172.159] Jan 25 18:00:01 milly postfix/smtpd[9418]: disconnect from odin.example.com[174.143.172.159] Jan 25 18:01:05 milly dovecot: dict: mysql: Connected to localhost (postfix) Jan 25 18:01:17 milly dovecot: master: Warning: SIGHUP received - reloading configuration Jan 25 18:01:27 milly postfix/anvil[6470]: statistics: max connection rate 2/60s for (submission:192.168.10.12) at Jan 25 17:57:19 Jan 25 18:01:27 milly postfix/anvil[6470]: statistics: max connection count 1 for (smtp:168.100.1.4) at Jan 25 17:52:25 Jan 25 18:01:27 milly postfix/anvil[6470]: statistics: max cache size 3 at Jan 25 17:55:23 Jan 25 18:01:59 milly dovecot: imap(matt): Error: net_connect_unix(/usr/var/run/dovecot/dict) failed: Permission denied (euid=1000(virtualmail) egid=1000(virtualmail) missing +r perm: /usr/var/run/dovecot/dict, euid is not dir owner) Jan 25 18:01:59 milly dovecot: imap(matt): Error: Internal quota calculation error Jan 25 18:02:02 milly dovecot: imap(matt): Error: net_connect_unix(/usr/var/run/dovecot/dict) failed: Permission denied (euid=1000(virtualmail) egid=1000(virtualmail) missing +r perm: /usr/var/run/dovecot/dict, euid is not dir owner) Jan 25 18:02:02 milly dovecot: imap(matt): Error: Internal quota calculation error Jan 25 18:02:14 milly dovecot: imap(matt): Error: net_connect_unix(/usr/var/run/dovecot/dict) failed: Permission denied (euid=1000(virtualmail) egid=1000(virtualmail) missing +r perm: /usr/var/run/dovecot/dict, euid is not dir owner) Jan 25 18:02:14 milly dovecot: imap(matt): Error: net_connect_unix(/usr/var/run/dovecot/dict) failed: Permission denied (euid=1000(virtualmail) egid=1000(virtualmail) missing +r perm: /usr/var/run/dovecot/dict, euid is not dir owner) Jan 25 18:02:14 milly dovecot: imap(matt): Error: net_connect_unix(/usr/var/run/dovecot/dict) failed: Permission denied (euid=1000(virtualmail) egid=1000(virtualmail) missing +r perm: /usr/var/run/dovecot/dict, euid is not dir owner) Jan 25 18:02:14 milly dovecot: imap(matt): Error: net_connect_unix(/usr/var/run/dovecot/dict) failed: Permission denied (euid=1000(virtualmail) egid=1000(virtualmail) missing +r perm: /usr/var/run/dovecot/dict, euid is not dir owner) Jan 25 18:02:17 milly dovecot: master: Warning: Processes aren't dying after reload, sending SIGTERM. Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=73545/124557 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=9609/127653 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=2836/8394 Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=9335/53756 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=2449/6084 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=1000/2416 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=52000/12276 Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=3796/86595 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=557/2333 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=2003/6833 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=60624/207831 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=103883/195056 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=68919/371893 Jan 25 18:02:17 milly dovecot: config: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: dict: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) ( I manually restarted the dovecot service ) Jan 25 18:03:09 milly dovecot: lda: Debug: Loading modules from directory: /usr/lib/dovecot/ Jan 25 18:03:09 milly dovecot: lda: Debug: Module loaded: /usr/lib/dovecot//lib10_quota_plugin.so Jan 25 18:03:09 milly dovecot: lda: Debug: Module loaded: /usr/lib/dovecot//lib20_expire_plugin.so Jan 25 18:03:09 milly dovecot: lda: Debug: Module loaded: /usr/lib/dovecot//lib90_sieve_plugin.so Jan 25 18:03:09 milly dovecot: auth: mysql: Connected to localhost (postfix) Jan 25 18:03:09 milly dovecot: lda: Debug: auth input: lists maildir=lists uid=1000 gid=1000 home=/var/spool/virtualmailboxes/lists quota_rule=*:storage=4194304 mail=mdbox:/var/spool/virtualmailboxes/lists Jan 25 18:03:09 milly dovecot: lda: Debug: changed username to lists Jan 25 18:03:09 milly dovecot: lda: Debug: Added userdb setting: plugin/maildir=lists Jan 25 18:03:09 milly dovecot: lda: Debug: Added userdb setting: plugin/quota_rule=*:storage=4194304 Jan 25 18:03:09 milly dovecot: lda: Debug: Added userdb setting: mail=mdbox:/var/spool/virtualmailboxes/lists Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Effective uid=1000, gid=1000, home=/var/spool/virtualmailboxes/lists Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota root: name=User quota backend=dict args=:proxy::quota Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota rule: root=User quota mailbox=* bytes=4294967296 messages=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota rule: root=User quota mailbox=Trash bytes=+858993459 (20%) messages=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota rule: root=User quota mailbox=Junk bytes=+858993459 (20%) messages=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: dict quota: user=lists, uri=proxy::quota, noenforcing=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:/var/spool/virtualmailboxes/lists Jan 25 18:03:09 milly dovecot: lda(lists): Debug: fs: root=/var/spool/virtualmailboxes/lists, index=, control=, inbox= Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Namespace : Using permissions from /var/spool/virtualmailboxes/lists: mode=0700 gid=-1 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Namespace : type=shared, prefix=shared/%u/, sep=/, inbox=no, hidden=no, list=children, subscriptions=no location=maildir:%h/ Jan 25 18:03:09 milly dovecot: lda(lists): Debug: shared: root=/usr/var/run/dovecot, index=, control=, inbox= Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Namespace : type=public, prefix=Public/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=yes location=mdbox:/var/spool/virtualmailboxes//public Jan 25 18:03:09 milly dovecot: lda(lists): Debug: fs: root=/var/spool/virtualmailboxes//public, index=, control=, inbox= Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Namespace Public/: Using permissions from /var/spool/virtualmailboxes//public: mode=0700 gid=-1 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota root: name=User quota backend=dict args=:proxy::quota Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota rule: root=User quota mailbox=* bytes=1073741824 messages=100000 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota rule: root=User quota mailbox=Trash bytes=+214748364 (20%) messages=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota rule: root=User quota mailbox=Junk bytes=+214748364 (20%) messages=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: dict quota: user=lists(a)example.com, uri=proxy::quota, noenforcing=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: none: root=, index=, control=, inbox= I can provide my doveconf -n output and any other info you may need. Thanks -Matt

2 2

[Dovecot] disable_plaintext_auth = no ignored by dovecot in Ubuntu 10.04
by David Mattox 31 Jan '11

31 Jan '11

Help!! I have been trying to get Dovecot configured to allow plaintext auth with no success. After some testing with the mail system I discovered the >dovecot -a commant to dump the config file values from the program. Gee, changing the value of disable_plaintext_auth had no effect on what the program reported this value to be! To eliminate possible errors caused by other config file entries I finally restored the /etc/dovecot/dovecot.conf file that was created by installing the package. I then changed the one line to uncomment disable_plaintext_auth and set it equal to no. restart the box and execute dovecot -a The value is still set to the default value of yes... Help! What is happening and how to I get this system to allow plain text auth without TLS? I did also try setting different ports for imap, imaps, pop3, pop3s inside the seperate protocol blocks with no effect. Below you will find a partial of the config file. Below that you will find the output of >dovecot -a and >dovecot -n Thank you in advance for any help with this problem. Dave dave@mail:~$ cat /etc/dovecot/dovecot.conf ## Dovecot configuration file # If you're in a hurry, see http://wiki.dovecot.org/QuickConfiguration # "dovecot -n" command gives a clean output of the changed settings. Use it # instead of copy&pasting this file when posting to the Dovecot mailing list. # '#' character and everything after it is treated as comments. Extra spaces # and tabs are ignored. If you want to use either of these explicitly, put the # value inside quotes, eg.: key = "# char and trailing whitespace " ... #listen = * disable_plaintext_auth = no dave@mail:~$ sudo dovecot -n # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-24-generic i686 Ubuntu 10.04.1 LTS log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 imaps pop3s managesieve ssl_cert_file: /etc/ssl/certs/ssl-mail.pem ssl_key_file: /etc/ssl/private/ssl-mail.key ssl_cipher_list: ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_privileged_group: mail mail_location: maildir:~/Maildir mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): imap_client_workarounds(managesieve): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): lda: postmaster_address: postmaster mail_plugins: sieve quota_full_tempfail: yes deliver_log_format: msgid=%m: %$ rejection_reason: Your message to <%t> was automatically rejected:%n%r auth default: mechanisms: plain login passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/dovecot-auth mode: 432 user: postfix group: postfix plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve dave@mail:~$ dave@mail:~$ sudo dovecot -a # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-24-generic i686 Ubuntu 10.04.1 LTS base_dir: /var/run/dovecot log_path: info_log_path: log_timestamp: %Y-%m-%d %H:%M:%S syslog_facility: mail protocols: imap pop3 imaps pop3s managesieve listen: * ssl_listen: ssl: yes ssl_ca_file: ssl_cert_file: /etc/ssl/certs/ssl-mail.pem ssl_key_file: /etc/ssl/private/ssl-mail.key ssl_key_password: ssl_parameters_regenerate: 168 ssl_cipher_list: ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_cert_username_field: commonName ssl_verify_client_cert: no disable_plaintext_auth: yes verbose_ssl: no

3 4

[Dovecot] Particular user post-login hang
by Henry C. 31 Jan '11

31 Jan '11

Greets, I'm using dovecot 2.0.9 (also tried rolling back to 2.0.8 which does the same - the output below is from 2.0.8), and this problem is imap specific. The following is a recurring problem with a specific user - as far as we can tell, other users are working just fine (there are thousands); but I bet there are others. In a nutshell: User authenticates OK, then the imap process hangs. It's almost as if something in the user's inbox is causing the problem, since if I clear all emails (and cache), then things work fine. The user will then receive emails OK for some random period (maybe a few days) and be able to read/write OK via imap, and the problem will re-occur. The debug output shows nothing untoward: auth: Debug: auth client connected (pid=20774) auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=144 rport=41641 resp=<hidden> auth: Debug: shadow(username,127.0.0.1): lookup auth: Debug: client out: OK 1 user=username auth: Debug: master in: REQUEST 1938161665 20774 1 238230058d076a9af1cd4405244d33ba auth: Debug: passwd(username,127.0.0.1): lookup auth: Debug: master out: USER 1938161665 username system_groups_user=username uid=17286 gid=300 home=/home/mailusers/username imap-login: Info: Login: user=<username>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=20775, secured imap(username): Debug: Effective uid=17286, gid=300, home=/home/mailusers/username imap(username): Debug: fs: root=/home/mailusers/username/., index=, control=, inbox=/var/mail/username Rawlog looks good: IN: A002 CAPABILITY A003 NAMESPACE C64 EXAMINE "" A002 STATUS "INBOX" (MESSAGES UNSEEN RECENT) A003 SELECT "INBOX" A004 EXPUNGE A005 SELECT "INBOX" A006 EXPUNGE A007 UID SEARCH UNSEEN A008 UID FETCH 2533:2588 (FLAGS BODY.PEEK[HEADER.FIELDS (RECEIVED)]) OUT: ... * 15 FETCH (UID 2536 FLAGS () BODY[HEADER.FIELDS (RECEIVED)] {944} ... * 67 FETCH (UID 2588 FLAGS () BODY[HEADER.FIELDS (RECEIVED)] {945} ... A008 OK Fetch completed. It's at this point that nothing happens for a short while and the user gets a blank screen. I tried running it through gdb (ie, "Talk IMAP Directly" - as described at http://dovecot.org/bugreport.html) but that fails with "Cannot find user-level thread for LWP nnnn: generic error", which is probably specific to our old box/installation. strace hangs with: Process 6574 attached - interrupt to quit gettimeofday({1296472202, 318955}, NULL) = 0 gettimeofday({1296472202, 319073}, NULL) = 0 epoll_wait(0x8, 0x806c4f8, 0x6, 0x1b708d gdb backtrace gives: 0xb7e2bff9 in epoll_wait () from /lib/tls/libc.so.6 (gdb) bt full #0 0xb7e2bff9 in epoll_wait () from /lib/tls/libc.so.6 No symbol table info available. #1 0xb7eed4eb in io_loop_handler_run (ioloop=0x806c390) at ioloop-epoll.c:181 ctx = (struct ioloop_handler_context *) 0x806c4b8 list = (struct io_list *) 0x8082850 io = (struct io_file *) 0x806c4f8 tv = {tv_sec = 1696, tv_usec = 510098} msecs = 8 ret = -1 i = 0 j = -1208929836 call = 8 #2 0xb7eec249 in io_loop_run (ioloop=0x806c390) at ioloop.c:404 No locals. #3 0xb7ed8e15 in master_service_run (service=0x806c2e0, callback=0xfffffffc) at master-service.c:484 No locals. #4 0x0805ee75 in main (argc=1, argv=0x806c1d8) at main.c:375 set_roots = {0x8061d80, 0x0} service_flags = 6 storage_service_flags = MAIL_STORAGE_SERVICE_FLAG_DISALLOW_ROOT postlogin_socket_path = 0x806c2e0 "\220�\006\bp�\006\b\200�\006\b\b" username = 0x0 c = -4 (gdb) lsof shows: COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME imap 6574 username cwd DIR 9,0 4096 30130787 /home2/home/mailusers/username imap 6574 username rtd DIR 3,1 4096 2 / imap 6574 username txt REG 9,0 941700 35836003 /home2/local/libexec/dovecot/imap imap 6574 username mem REG 0,0 0 [heap] (stat: No such file or directory) imap 6574 username mem REG 9,0 109568 30130578 /home2/home/mailusers/username/.imap/INBOX/dovecot.index.cache imap 6574 username mem REG 3,1 41351 13749135 /lib/tls/libnss_files-2.3.5.so imap 6574 username mem REG 3,1 41583 13749137 /lib/tls/libnss_nis-2.3.5.so imap 6574 username mem REG 3,1 92501 13749132 /lib/tls/libnsl-2.3.5.so imap 6574 username mem REG 3,1 35866 13749133 /lib/tls/libnss_compat-2.3.5.so imap 6574 username mem REG 3,1 87827 13749140 /lib/tls/libpthread-2.3.5.so imap 6574 username mem REG 3,1 1366940 13749126 /lib/tls/libc-2.3.5.so imap 6574 username mem REG 3,1 34582 13749142 /lib/tls/librt-2.3.5.so imap 6574 username mem REG 3,1 13120 13749129 /lib/tls/libdl-2.3.5.so imap 6574 username mem REG 9,0 17380 6897709 /home2/home/mailusers/username/.imap/INBOX/dovecot.index.log imap 6574 username mem REG 9,0 1980063 35835914 /home2/local/lib/dovecot/libdovecot.so.0.0.0 imap 6574 username mem REG 9,0 4911010 35835915 /home2/local/lib/dovecot/libdovecot-storage.so.0.0.0 imap 6574 username mem REG 3,1 27274 654816 /lib/libsafe.so.2.0.16 imap 6574 username mem REG 3,1 99790 654754 /lib/ld-2.3.5.so imap 6574 username 0w CHR 1,3 327760 /dev/null imap 6574 username 1w CHR 1,3 327760 /dev/null imap 6574 username 2w FIFO 0,5 1548069248 pipe imap 6574 username 3w FIFO 0,5 1548064788 pipe imap 6574 username 4r FIFO 0,5 1548414049 pipe imap 6574 username 5w FIFO 0,5 1548069260 pipe imap 6574 username 6u unix 0xe481b180 1548069218 /usr/local/var/run/dovecot/login/imap imap 6574 username 7w FIFO 0,5 1548414049 pipe imap 6574 username 8u 0000 0,6 0 9 unknown inode type imap 6574 username 9u REG 9,0 17380 6897709 /home2/home/mailusers/username/.imap/INBOX/dovecot.index.log imap 6574 username 10u IPv4 1548412828 TCP localhost:144->localhost:38067 (ESTABLISHED) imap 6574 username 11u REG 9,0 2632 30130623 /home2/home/mailusers/username/.imap/INBOX/dovecot.index imap 6574 username 12u REG 9,0 109568 30130578 /home2/home/mailusers/username/.imap/INBOX/dovecot.index.cache imap 6574 username 13u REG 9,0 10472498 9257043 /home2/var/spool/mail/username Any pointers? Thanks Henry ---------------------- CONFIG: ------- auth_debug = yes auth_mechanisms = plain login default_login_user = nobody first_valid_uid = 200 listen = * log_path = /var/log/dovecot.log mail_debug = yes mail_location = mbox:~/.:INBOX=/var/mail/%u passdb { driver = shadow } protocols = imap service imap-login { inet_listener imap { port = 144 # 143 is for imap proxy } } ssl = no userdb { driver = passwd }

2 4

[Dovecot] dovecot can't see mail that is there
by Joachim Ferreira 31 Jan '11

31 Jan '11

Hi list, I've yet to figure out what's the issue with my installation, why I can't see the mails that are definitely there. I've updated with last package: dovecot-2.0.9-1.fc14.x86_64.rpm and performed the following test: 1) send a simple 2 lines test mail from "root" to user "testdvct" with alpine 2) login under "testdvct" + run alpine + list (only list, not read) the mail: +------------------------------ Alpine Output --------------------------------------+ | ALPINE 2.02(1266) MESSAGE INDEX Folder: INBOX Message 1 of 1 NEW | | | | + N 1 17:43 root (881) | +--------------------------------------------------------------------------- --------+ so it tells me I've got one mail from root 3) I issue the command: "strace -o strace-dovecot.txt -p 2218" where 2218 is the /usr/sbin/dovecot PID 4) telnet into pop3: # telnet localhost pop3 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. +OK Dovecot ready. user testdvct +OK pass <my-password> +OK Logged in. list +OK 0 messages: . quit +OK Logging out. Connection closed by foreign host. 5) kill strace Still no joy! Is there anything else I can do to debug this issue? Thanks, JF ------------------------------------------- There are not dovect entries in the syslog ------------------------------------------- # ls -lhR /var/run/dovecot /var/run/dovecot: total 12K srw------- 1 root root 0 Jan 19 17:38 anvil srw------- 1 root root 0 Jan 19 17:38 anvil-auth-penalty srw------- 1 root root 0 Jan 19 17:38 auth-client srw------- 1 dovecot root 0 Jan 19 17:38 auth-login srw------- 1 root root 0 Jan 19 17:38 auth-master srw------- 1 root root 0 Jan 19 17:38 auth-userdb srw------- 1 dovecot root 0 Jan 19 17:38 auth-worker srw------- 1 root root 0 Jan 19 17:38 config srw------- 1 root root 0 Jan 19 17:38 dict srw------- 1 root root 0 Jan 19 17:38 director-admin srw------- 1 root root 0 Jan 19 17:38 director-userdb srw-rw-rw- 1 root root 0 Jan 19 17:38 dns-client srw------- 1 root root 0 Jan 19 17:38 doveadm-server lrwxrwxrwx 1 root root 25 Jan 19 17:38 dovecot.conf -> /etc/dovecot/dovecot.conf drwxr-xr-x 2 root root 4.0K Dec 18 12:30 empty srw-rw-rw- 1 root root 0 Jan 19 17:38 lmtp drwxr-x--- 2 root dovenull 4.0K Jan 19 17:38 login -rw------- 1 root root 5 Jan 19 17:38 master.pid /var/run/dovecot/empty: total 0 /var/run/dovecot/login: total 0 srw-rw-rw- 1 root root 0 Jan 19 17:38 dns-client srw-rw-rw- 1 root root 0 Jan 19 17:38 imap srw-rw-rw- 1 root root 0 Jan 19 17:38 login srw-rw-rw- 1 root root 0 Jan 19 17:38 pop3 srw-rw-rw- 1 root root 0 Jan 19 17:38 ssl-params --------------------------------------------------------- # dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.35.10-74.fc14.x86_64 x86_64 Fedora release 14 (Laughlin) auth_debug = yes auth_debug_passwords = yes auth_verbose_passwords = plain disable_plaintext_auth = no mail_location = mbox:INBOX=/var/mail/%u mbox_write_locks = fcntl passdb { driver = pam } pop3_client_workarounds = outlook-no-nuls oe-ns-eoh service imap-login { group = dovenull } service pop3-login { group = dovenull } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } -------------------------------------------------------- -----Original Message----- From: dovecot-bounces+joach_ferr=yahoo.co.uk(a)dovecot.org [mailto:dovecot-bounces+joach_ferr=yahoo.co.uk@dovecot.org] On Behalf Of Joachim Ferreira Sent: 06 January 2011 19:46 To: dovecot(a)dovecot.org Subject: [Dovecot] dovecot can't see mail that is there I used to install dovecot on any Fedora fresh installation and I could fetch my internal mail few minutes later. Now I've been struggling for two days and I haven't got my mail working yet. I have Fedora 14 with sendmail. Some application on the same machine send mail to an account on the same machine (hence all is confined to one machine) and I want to retrieve it from a laptop on the same LAN via Outlook. If I login into the account and check the mail with the alpine (ex pine) client, I see that there are 10 mails. When I "telnet localhost pop3" and login into the account, the "list" command says there are 0 mails. Various suggestions found on the internet for slightly different configuration did not help. All the help will be very much appreciated. Thanks, Joachim ++++++++++++++++++++++++++++++++++++++++++++ The output of dovecot -n ------------------------ # dovecot -n # 2.0.8: /etc/dovecot/dovecot.conf # OS: Linux 2.6.35.10-74.fc14.x86_64 x86_64 Fedora release 14 (Laughlin) auth_debug = yes auth_debug_passwords = yes auth_verbose_passwords = plain disable_plaintext_auth = no mail_location = mbox:INBOX=/var/mail/%u mbox_write_locks = fcntl passdb { driver = pam } pop3_client_workarounds = outlook-no-nuls oe-ns-eoh ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } NOTE - I don't use ssl, but disabling ssl + certificate did not change behaviour. THE OUTPUT OF /var/log/maillog ----------------------------------------- Jan 6 19:14:26 BEATLES dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Jan 6 19:14:26 BEATLES dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so Jan 6 19:14:26 BEATLES dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so Jan 6 19:14:26 BEATLES dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libmech_gssapi.so Jan 6 19:14:26 BEATLES dovecot: auth: Debug: pam(joachim,192.168.0.88): lookup service=dovecot Jan 6 19:14:26 BEATLES dovecot: auth: Debug: pam(joachim,192.168.0.88): #1/1 style=1 msg=Password: Jan 6 19:14:26 BEATLES dovecot: auth: Debug: client out: OK#0111#011user=joachim Jan 6 19:14:26 BEATLES dovecot: auth: Debug: master in: REQUEST#0113019243521#01112409#0111#0116f7f83729469c6158f08283ec2e20067 Jan 6 19:14:26 BEATLES dovecot: auth: Debug: passwd(joachim,192.168.0.88): lookup Jan 6 19:14:26 BEATLES dovecot: auth: Debug: master out: USER#0113019243521#011joachim#011system_groups_user=joachim#011uid=500#011gi d=500#011home=/home/joachim Jan 6 19:14:26 BEATLES dovecot: pop3-login: Login: user=<joachim>, method=PLAIN, rip=192.168.0.88, lip=192.168.0.2, mpid=12414 Jan 6 19:14:26 BEATLES dovecot: pop3(joachim): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0

2 2

[Dovecot] Duplicate messages when moving message to inbox
by Ron Garret 31 Jan '11

31 Jan '11

Hello, I am encountering a strange problem but I'm not sure if it's a dovecot problem or a Mac Mail problem. The symptom is that if I move a message from a folder into my inbox the message ends up showing up as a duplicate in Mac Mail. On the server it's still just one message. This ONLY happens when I move a message IN to the inbox. It does not happen when I move a message out of my inbox into a folder, or when I move a message between folders. I can force a sync on Mac Mail and the duplicate is still there. If however I quit Mac Mail and start it up again, the duplicate disappears. I can move one of the duplicated messages out of my inbox into a folder and then back into my inbox repeatedly and end up with (apparently) an arbitrary number of copies of the same message. On the server, though, there is still only one file. Surely I'm not the first person to have encountered this behavior? Does anyone happen to know if this is a dovecot bug or a Mac Mail bug (or, hopefully, a configuration problem)? Thanks, rg

2 1

[Dovecot] Thunderbird doesn't popup on new mail
by Adrian Stoica 31 Jan '11

31 Jan '11

I have a question : i've upgrade dovecot from 1.1.4 to 2.0.9 and everything is fine except thunderbird clients , that no longer show a popup when new mail arrives. Anyone know why ? doveconf -n: # 2.0.9: /usr/dovecot2/etc/dovecot/dovecot.conf # OS: Linux 2.6.35.4 i686 auth_cache_negative_ttl = 10 secs auth_cache_size = 10 M auth_cache_ttl = 1 mins auth_mechanisms = plain login cram-md5 auth_socket_path = /var/run/dovecot/auth-userdb auth_verbose_passwords = plain base_dir = /var/run/dovecot/ default_client_limit = 5000 default_internal_user = vmail default_login_user = nobody default_process_limit = 200 deliver_log_format = mail from=%f subject=%s msgid=%m: %$ dict { acl = mysql:/usr/dovecot2/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no first_valid_uid = 1 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = * mail_location = maildir:~/Maildir mail_plugins = " quota acl trash notify mail_log" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { inbox = yes location = prefix = separator = / subscriptions = yes type = private } namespace { hidden = no list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } passdb { args = /usr/dovecot2/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { acl = vfile acl_shared_dict = proxy::acl autocreate = Trash autocreate2 = Drafts autocreate3 = Sent autosubscribe = Trash autosubscribe2 = Drafts autosubscribe3 = INBOX autosubscribe4 = Sent mail_log_events = delete mailbox_delete mailbox_rename mail_log_group_events = yes quota = maildir:User quota quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=95%% quota-warning 90 %u quota_warning3 = storage=85%% quota-warning 85 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve trash = /usr/dovecot2/etc/dovecot/dovecot-trash.conf.ext } postmaster_address = postmaster(a)dacris.net protocols = imap rejection_subject = Rejected: %s: %r service auth { unix_listener auth-userdb { mode = 0660 user = vmail } } service dict { unix_listener dict { user = vmail } } service imap-login { process_min_avail = 16 service_count = 1 } service imap { process_limit = 2048 vsz_limit = 512 M } service quota-warning { executable = script /bin/quota_warning.sh unix_listener quota-warning { user = vmail } user = vmail } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /usr/dovecot2/etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lda { mail_plugins = " quota acl trash notify mail_log sieve autocreate" } protocol imap { mail_plugins = " quota acl trash notify mail_log imap_quota imap_acl" }

3 3

Re: [Dovecot] Cooperating with dovecot in its Maildir
by Timo Sirainen 30 Jan '11

30 Jan '11

On 29.1.2011, at 19.05, Rob Browning wrote: Oops, I accidentally added you to discard list rather than accept list :) > Timo Sirainen <tss(a)iki.fi> writes: > >> If you're only changing the standard maildir flags (not a..z = >> keywords) then you don't really need to lock anything. The uidlist >> locking could prevent a mail from being temporarily lost, but this >> happening is highly >> unlikely. http://wiki2.dovecot.org/MailboxFormat/Maildir#Locking >> explains. > > I saw that, but I wasn't sure if the fact that a message might "receive > a new UID" could be a problem. It's a theoretical problem mostly, especially in your case. It's mainly visible when doing stress testing with large maildirs. I doubt in regular use it matters. Courier doesn't try to prevent it in any way and it seems to have worked mostly ok. > Or is the UID supposed to change when the flags change? No.

2 3

[Dovecot] dovecot: pop3-login: Disconnected (tried to use disabled plaintext auth): method=PLAIN
by John Espiro 30 Jan '11

30 Jan '11

First, my problem. Settings are below that... Everything works fine - I can login to webmail (users are tied to LDAP). I can send and receive email via my Thunderbird Client. However in my mail.err log I see lots of messages that say: dovecot: pop3-login: Disconnected (tried to use disabled plaintext auth): method=PLAIN 1.) What does that mean, and how can I solve it? 2.) With regards to pop3s I am not altogether sure that I am using the right config in my dovecot.conf file (also below). Can someone let me know? Version: ================== dovecot --version = 1.2.12 System: ================== Ubuntu Server 10.10 (64bit) dovecot -n ================== # 1.2.12: /etc/dovecot/dovecot.conf # OS: Linux 2.6.35.4-rscloud x86_64 Ubuntu 10.10 log_timestamp: %Y-%m-%d %H:%M:%S protocols: pop3 pop3s imap imaps login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: mbox:~/mail:INBOX=/var/mail/%u mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: passdb: driver: pam userdb: driver: passwd Dovecot.conf ================== egrep -v "^[[:space:]]*#|^$" /etc/dovecot/dovecot.conf protocols = pop3 pop3s imap imaps log_timestamp = "%Y-%m-%d %H:%M:%S " ssl = yes ssl_cert_file = /etc/ssl/certs/dovecot.pem ssl_key_file = /etc/ssl/private/dovecot.pem login_dir = /var/run/dovecot/login mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail protocol imap { login_executable = /usr/lib/dovecot/imap-login mail_executable = /usr/lib/dovecot/imap } protocol pop3 { login_executable = /usr/lib/dovecot/pop3-login mail_executable = /usr/lib/dovecot/pop3 pop3_uidl_format = %08Xu%08Xv } protocol managesieve { } auth default { mechanisms = plain passdb pam { } userdb passwd { } user = root !include_try /etc/dovecot/auth.d/*.auth } dict { } plugin { } !include_try /etc/dovecot/conf.d/*.conf

4 13

[Dovecot] dovecot@dovecot.org
by Veronese Claudio 30 Jan '11

30 Jan '11

I apologize, but I can not find a complete list of directives in dovecot.conf possible. where can I find? thanks excuse my for my orrible english -- Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP autenticato? GRATIS solo con Email.it http://www.email.it/f Sponsor: Apri Conto Corrente Arancio entro il 28 febbraio 2011 e ricevi 100 euro da spendere su Media World compra online. Aprilo adesso! Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=11255&d=29-1

5 4

Re: [Dovecot] sql : uid, gid, home ignored ?
by Hurricane 30 Jan '11

30 Jan '11

> > > > Hello, > > > > I'm trying to setup a dovecot imap server. > > > > version is 2.0.9 > > I've setup a mysql database using: > > > > user_query = \ > > SELECT home, uid, gid, home as userdb_home, uid as userdb_uid, > > gid as userdb_gid, \ > > FROM user WHERE username = '%n' AND domain = '%d' AND active = > > 'Y' > > > > Your SQL statement is incorrect, try: > > user_query = SELECT userdb_home as home, userdb_uid as uid, userdb_gid > as gid, \ > FROM user WHERE username = '%n' AND domain = '%d' AND active = 'Y' > > > > nick > (I sent the first mail with an address not registred with the mailing list) Thank you Nick, but it didn't changed a thing. (I guess dovecots ignores columns with unknown names) When I connect I still get: ==> mail.err <== Jan 30 11:06:12 mail.mysite.com dovecot: imap(theuser): Error: user theuser: Couldn't drop privileges: User is missing UID (see mail_uid setting) Jan 30 11:06:12 mail.mysite.com dovecot: imap(theuser): Error: Internal error occurred. Refer to server log for more information. ==> mail.info <== Jan 30 11:06:12 mail.mysite.com dovecot: imap-login: Login: user=<theuser>, method=PLAIN, rip=1.2.3.4, lip=5.6.7.8, mpid=9298, TLS Jan 30 11:06:12 mail.mysite.com dovecot: imap(theuser): Error: user theuser: Couldn't drop privileges: User is missing UID (see mail_uid setting) Jan 30 11:06:12 mail.mysite.com dovecot: imap(theuser): Error: Internal error occurred. Refer to server log for more information. ==> mail.log <== Jan 30 11:06:12 mail.mysite.com dovecot: imap-login: Login: user=<theuser>, method=PLAIN, rip=1.2.3.4, lip=5.6.7.8, mpid=9298, TLS Jan 30 11:06:12 mail.mysite.com dovecot: imap(theuser): Error: user theuser: Couldn't drop privileges: User is missing UID (see mail_uid setting) Jan 30 11:06:12 mail.mysite.com dovecot: imap(theuser): Error: Internal error occurred. Refer to server log for more information. ==> mail.warn <== Jan 30 11:06:12 mail.mysite.com dovecot: imap(theuser): Error: user theuser: Couldn't drop privileges: User is missing UID (see mail_uid setting) Jan 30 11:06:12 mail.mysite.com dovecot: imap(theuser): Error: Internal error occurred. Refer to server log for more information. ==> dovecot-debug.log <== 2011-01-30 11:06:12auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=5.6.7.8 rip=1.2.3.4 lport=143 rport= 9863 2011-01-30 11:06:12auth: Debug: client out: CONT 1 2011-01-30 11:06:12auth: Debug: client in: CONT 1 AGh1cnJpY2FuZQBka3NtdDExJA== 2011-01-30 11:06:12auth: Debug: sql(theuser(a)mysite.com,1.2.3.4): query: SELECT username AS user, password, home AS userdb_home, uid AS userdb_uid, id AS userdb_gid, home, uid, gid FROM user WHERE username = 'theuser' AND domain = 'mysite.com' AND active = 'Y' 2011-01-30 11:06:12auth: Debug: auth(theuser(a)mysite.com,1.2.3.4): username changed theuser(a)mysite.com -> theuser 2011-01-30 11:06:12auth: Debug: auth(theuser(a)mysite.com,1.2.3.4): username changed theuser(a)mysite.com -> theuser 2011-01-30 11:06:12auth: Debug: client out: OK 1 user=theuser home=/home/theuser uid=2000 gid=1000 2011-01-30 11:06:12auth: Debug: master in: REQUEST 1628045313 9246 1 926873f8d25265e8b06ad56f5ac8ba9d 2011-01-30 11:06:12auth: Debug: master out: USER 1628045313 theuser The debug shows the right home, uid, gid for the user but it seems it does not cares about that afterwards. The error only disappears when I set the global mail_uid and mail_gid but that's not what I need. I need to be able to use a specific uid/gid/home for each account. Weird. Regards, Eric

2 1

[Dovecot] inform users's about new spam
by ckubu 30 Jan '11

30 Jan '11

Hallo evryone! Mailsetup: postfix+dovecot2 with postgres database backend - about 2,000 virtual mailboxes, growing.. New possible spam will be sorted into a users directory named "spam", emails older than 30 day's in that folder will be deleted by using expunge. I would like to inform my users evry two day's (or something like that) about new emails in the spam folder. Can you give me a hint how to handle that ? Are there helpful tools , or have i to wrote my own script, walking through the folders, checking for new emails since last check and finally inform the user if needed. Best wishes Christoph

1 0

[Dovecot] Copying sieve scripts
by Christoph Pleger 30 Jan '11

30 Jan '11

Hello, I am using squirrelmail with avelsieve to edit my filter rules. The filter rules are like this: 1. If the message contains a virus, delete the mail and notify me by email. 2. If the message is spam, deliver it to my spam folder. 3. If the message is from the dovecot mailing list, deliver it to my dovecot folder Yesterday, I created a new user and wanted to let him have rules 1 and 2 like above, only with another destination for email notification. So, I copied my sieve script into the sieve directory of the new user, deleted rule 3, changed the destination for email notification and then called sievec to compile the rule set. But this did not work like expected: Using squirrelmail, I saw that the new user had only rules 1 and 2, but the destination in rule 1 still contains my email address. My own account still has three rules. So, this simple way of copying sieve scripts does not work. Is there another way to copy sieve rules from one user to another? Regards Christoph

3 2

[Dovecot] sql : uid, gid, home ignored ?
by Eric Diaz Fernandez 30 Jan '11

30 Jan '11

Hello, I'm trying to setup a dovecot imap server. version is 2.0.9 I've setup a mysql database using: user_query = \ SELECT home, uid, gid, home as userdb_home, uid as userdb_uid, gid as userdb_gid, \ FROM user WHERE username = '%n' AND domain = '%d' AND active = 'Y' password_query = \ SELECT username AS user, password, home as userdb_home, uid as userdb_uid, gid as userdb_gid, home, uid, gid \ FROM user WHERE username = '%n' AND domain = '%d' AND active ='Y' (I get the information with and without the userdb_ prefix since I was not sure what was needed) When I login, I see the password_query in the debug log and it says: client out: OK 1 user=theuser home=/home/theuser uid=1000 gid=1000 master in: REQUEST 547880961 10068 1 e6...(hexadecimal stuff) master out: USER 547880961 theuser But in the mail.err log i see: dovecot: imap(theuser): Error: user theuser: Couldn't drop privileges: User is missing UID (see mail_uid setting) dovecot: imap(theuser): Error: Internal error occurred. Refer to server log for more information. The same two lines are also displayed in mail.info and mail.log Further testing (setting mail_uid & mail_gid to a nobody) shown that the home setting was ignored too. The sql example says that uid and gid are supposed to be an override of the mail_uid and mail_gid settings. Any idea of why the columns are ignored ? Thanks in advance, Eric

3 3

[Dovecot] Cooperating with dovecot in its Maildir
by Rob Browning 29 Jan '11

29 Jan '11

Is it possible to cooperate with dovecot within its Maildir, and if so, what's required? In this particular case, we're thinking of trying to allow notmuch to operate directly on the dovecot Maildir, and at the moment, the only modifications notmuch makes are to change maildir flags. Would locking dovecot-uidlist.lock be sufficient, perhaps via liblockfile? Also, is there some reliable way to detect a dovecot Maildir? For example, are any of the dovecot-* files guaranteed to exist all the time? Thanks -- Rob Browning rlb @defaultvalue.org and @debian.org GPG as of 2002-11-03 14DD 432F AE39 534D B592 F9A0 25C8 D377 8C7E 73A4

2 1

[Dovecot] How do I do this with mdbox?
by Odhiambo Washington 29 Jan '11

29 Jan '11

In my life with Maildir, mails were stored as single files, each mail per file. It was pretty easy to resend an e-mail from a Maildir folder to another address, by causing the mail to be re-injected into my MTA (Exim) queue for processing: I'd use a very simple shell script to achieve the above: #!/bin/sh email=$(find $*) { for x in ${email}; do sendmail president(a)egypt.gov < ${x}; done } Now, with mdbox container/storage, it beats me how to achieve the same. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Damn!!

2 1

[Dovecot] bsdauth + dovecot-sieve
by Gonzalo Rodriguez 28 Jan '11

28 Jan '11

Hi all, I have a problem with my dovecot/postfix configuration: here is my dovecot -n # /usr/local/sbin/dovecot -n # 1.1.20: /etc/dovecot.conf Warning: fd limit 128 is lower than what Dovecot can use under full load (more than 768). Either grow the limit or change login_max_processes_count and max_mail_processes settings # OS: OpenBSD 4.7 amd64 ffs base_dir: /var/dovecot/ log_path: /var/log/dovecot protocols: imaps pop3s ssl_cert_file: /etc/ssl/dovecotcert.pem login_dir: /var/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_user: _dovecot mail_location: maildir:/var/www/datos/correo/qbit.com.ar/%n:LAYOUT=fs mail_debug: yes mbox_write_locks: fcntl mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh lda: mail_plugins: cmusieve postmaster_address: postmaster(a)bla.com log_path: /var/log/dovecot-deliver-errors.log info_log_path: /var/log/dovecot-deliver.log auth default: mechanisms: login plain verbose: yes debug: yes debug_passwords: yes passdb: driver: bsdauth userdb: driver: static args: uid=vmail gid=vmail home=/var/www/datos/correo/bla.com/%n socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: _postfix group: _postfix master: path: /var/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: sieve_global_dir: /var/sieve sieve_global_path: /var/sieve/global-default.sieve sieve: /var/sieve/%n.sieve I use bsdauth to system users auth againts Active-Directory, now I want to create vacation mails with dovecot-sieve, but have issues. Can I use in dovecot deliver (master.cf) with parameters -d if I use bsdauth to auth without passdb (the are system users)? if I put this in my master.cf dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/deliver -f ${sender} -d ${recipient} I get: deliver(prueba2(a)bla.com): Jan 25 15:17:24 Error: Auth lookup returned failure If I change the -d ${recipient} for -a ${recipient} dovecot use the user (vmail) who run dovecot to storage the storage: /var/www/datos/correo/bla.com/vmail/INBOX, so I get... deliver(vmail): Jan 25 15:54:46 Info: maildir: data=/var/www/datos/correo/qbit.com.ar/vmail:LAYOUT=fs deliver replace %n for the user who run dovecot, so don't save the mail in deliver(vmail): Jan 25 15:54:46 Info: maildir: data=/var/www/datos/correo/qbit.com.ar/prueba2:LAYOUT=fs This works properly if a use virtual_transport = virtual. some idea? cheers.

2 5

[Dovecot] Sharing user folders doesn't work when users have periods in names.
by ian+dovecot＠comtek.co.uk 28 Jan '11

28 Jan '11

I am using period as an IMAP separator with Maildir directories and I cannot share folders where the user has a period in their name. Suppose I log in as 'some.user' and do: SETACL INBOX mailtest(a)example.co.uk +lrwstipekxacd /var/mail/virtual/users/some.user/Maildir/dovecot-acl is created, with appropriate contents and shared-mailboxes.db gains an entry for 'shared/shared-boxes/user/mailtest@example.co.uk/some.user@example.co.uk'. mailtest is simply unable to see a new folder. As mailtest 'a LIST "" "Users.*" ' is empty. If I do ' a MYRIGHTS Users.some.user.INBOX ' I get 'NO [NONEXISTENT] Mailbox doesn't exist: Users.some.user.INBOX' and, oddly, a new maildir appears: '* LIST (\Noselect \HasChildren) "." "Users.some" ' -- it also creates an empty folder structure with a single file /var/mail/virtual/users/some/Maildir/dovecot-acl-list too! Is there a workaround that does not involve rebuilding every user's Maildir with backslash as a separator? Thanks, Ian

3 4

[Dovecot] Dovecot2 + Sieve
by Philipp v. Strobl-Albeg 28 Jan '11

28 Jan '11

Hi, i'm new on sieve, but want to use ist with sogo. The Problem is, that when i set a redirect or vacation rule like: redirect "email(a)example.com"; (real Adress is different) the sieve says the mail would be forwarded, but no mail is sent. (No Action in /var/log/maillog) And because there is no Error-Message it's difficult to search for... Dovecot log ------- Jan 28 10:53:46 lda(ptest(a)pilarkto.com): Debug: sieve: using sieve path for user's script: /var/mail/vhosts/test/.dovecot.sieve Jan 28 10:53:46 lda(ptest(a)pilarkto.com): Debug: sieve: opening script /var/mail/vhosts/test/.dovecot.sieve Jan 28 10:53:46 lda(ptest(a)pilarkto.com): Debug: sieve: script binary /var/mail/vhosts/test/.dovecot.svbin successfully loaded Jan 28 10:53:46 lda(ptest(a)pilarkto.com): Debug: sieve: binary save: not saving binary /var/mail/vhosts/test/.dovecot.svbin, because it is already stored Jan 28 10:53:46 lda(ptest(a)pilarkto.com): Debug: sieve: executing script from /var/mail/vhosts/test/.dovecot.svbin Jan 28 10:53:46 lda(ptest(a)pilarkto.com): Info: sieve: msgid=<4D429227.3000004(a)pilarkto.net>: forwarded to <email(a)example.com> ----- Everything else works fine, except the program "mail". I dont know if there is a coherence but a typical Mailserver-Test "date|mail -s test email(a)example.com" also don't sent a message to postfix. I hope you will held me out or even say me, if this is a bug or a misconfiguration. thanks a lot Philipp

4 7

[Dovecot] dovecot ACL
by PA 28 Jan '11

28 Jan '11

Hi in Dovecot 2.x with virtual domains, is there a way specify what domains can create shared directories and who can't? For example I have 3 domains, domain1.com, domain2.com and domain3.com. Let's say I only want domain1.com's users to create shared folders how can I go about doing this. Thanks, Paul

2 5

[Dovecot] Telnet access creates new maildir folders
by Seasoul 28 Jan '11

28 Jan '11

Hi, I am running Dovecot Version 1.0.15on a Debian server, with postfix and postfixadmin. My mailbox base is /var/mail/vmail When I send an email to a user1(a)domain.com for the first time, the user "mail" creates a set of dovecot folders under /var/mail/vmail/ user1(a)domain.com/ and my new emails are found in /var/mail/vmail/ user1(a)domain.com/new When I test my server using telnet (telnet domain.com 110), I can log in fine as a user1, but when I type "LIST", it tells me there are no emails. And I realize a new set of dovecot folders were created under /var/mail/vmail/user1/ ! The folders are created by the user "user1". Obviously the folder "new" under that is empty, since my emails received are in /var/mail/vmail/user1(a)domain.com/new and not /var/mail/vmail/user1/new . Therefore, connecting with an email client via POP also shows an empty inbox. I am lost as to what to do to fix this, and how to let the server know that pop access should be looking into /var/mail/vmail/user1(a)domain.com/ instead of /var/mail/vmail/user1/ . Hopefully someone on this list will be able to save me from my misery :) Cheers Sea

7 20

[Dovecot] migration dovecot 1 --> dovecot 2
by Frank Bonnet 28 Jan '11

28 Jan '11

Hello I plan to migrate my mailhub from 1 to 2 , is it a good idee to remove all indexes .imap directories from the new server before starting it in production state ? Thanks

3 2

[Dovecot] Best way to calculate concurrent users?
by Henrique Fernandes 28 Jan '11

28 Jan '11

Well, i am having some problens to figure out how many concurrent users into the server! In my envoriment now, most people are using the webmail interface, and it just conect and disconct pretty quickly so i can not get it with "doveadm who" doveadm who only gets the ones that are connect with clients. O use ipvs to balance betwaeen 2 servers does anyone have an ideia ? With ipvs i get this results: IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP XXX.XX.X.XX:143 lblcr -> 10.0.2.10:143 Masq 1 16 228 -> 10.0.2.11:143 Masq 1 16 184 There is others ports and stuff. Does any one have an ideia how to get this number ? []'sf.rique

2 3

[Dovecot] Storing Dovecot index files on sql
by list＠airstreamcomm.net 28 Jan '11

28 Jan '11

We have been communicating with the mailling list on another thread regarding dotlocking on the dovcot-uidlist over an NFS share, and I was hoping to get some ideas on whether or not a sql database would be a suitable location for storing the dovecot index files. Our though process so far has been that storing the index files on NFS with the maildir has not worked very effectively when we are using multiple Dovecot servers (even using sticky IPs in our load balancer), and using local storage is not possible with a cluster of machines, so we got to thinking about what type of storage platform would be suitable for these index files that would provide native locking of the data while multiple servers accessed and wrote to it. Our question to the community is whether sql storage for index files has ever been considered, what issues would this introduce, and if it's even feasible? Thanks everyone! Michael

3 2

[Dovecot] Differenft INBOX for IMAP/POP with checkpassword passdb
by Peter Mogensen 27 Jan '11

27 Jan '11

Hi, I'm trying to do a setup where IMAP and POP users see different INBOX' Like described on the virtual folder wiki page: http://wiki.dovecot.org/Plugins/Virtual However, for now, I'm stuck with the checkpassword passdb and prefetch userdb So I can't parameterize the result on %s like the example with MySQL does. So I thought of having to different checkpassword scripts: passdb checkpassword { args = /usr/bin/checkpassword-%s } However, Dovecot (1.2.15) doesn't seem to expand %s even though the Wiki says it should be available everywhere: http://wiki.dovecot.org/Variables Is this a bug, or am I missing something. /Peter

1 1

[Dovecot] Iphone IMAP access
by Frank Bonnet 27 Jan '11

27 Jan '11

Hello When I use my iphone to access my IMAP folders I can see ALL folders in my userland and not only those listed in .subscriptions file ... Anyone has an explaination of this ? Might be a security/confidentiality hole isn't it ?

13 30

[Dovecot] Best Cluster Storage
by Jonathan Tripathy 27 Jan '11

27 Jan '11

Hi Everyone, I wish to create a Postfix/Dovecot active-active cluster (each node will run Postfix *and* Dovecot), which will obviously have to use central storage. I'm looking for ideas to see what's the best out there. All of this will be running on multiple Xen hosts, however I don't think that matters as long as I make sure that the cluster nodes are on different physical boxes. Here are my ideas so far for the central storage: 1) NFS Server using DRBD+LinuxHA. Export the same NFS share to each mail server. Which this seems easy, how well does Dovecot work with NFS? I've read the wiki page, and it doesn't sound promising. But it may be outdated.. 2) Export block storage using iSCSI from targets which have GFS2 on DRBD+LinuxHA. This is tricky to get working well, and it's only a theory. 3) GlusterFS. Easy to set up, but apparently very slow to run. So what's everybody using? I know that Postfix runs well on NFS (according to their docs). I intend to use Maildir Thanks

17 75

[Dovecot] Can't get it working
by llwyble＠suddenlink.net 26 Jan '11

26 Jan '11

I get dovecot to work and answer when telnet to 110 both local and from another computer. But it shows nothing in the log files except it's running. Here's the log and other info: /var/log/maillog: Jan 25 16:49:32 widgeteye dovecot: master: Dovecot v2.0.9 starting up (core dumps disabled) dovecot --version 2.0.9 dovecot -n output # 2.0.9: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.33.4-smp i686 Slackware 13.1.0 default_internal_user = myusername default_login_user = myusername disable_plaintext_auth = no listen = * mail_location = maildir:~/mail mail_privileged_group = mail passdb { args = scheme=CRYPT username_format=%u /usr/local/etc/dovecot/passwd.dovecot driver = passwd-file } protocols = pop3 service pop3-login { inet_listener pop3 { port = 110 } } ssl = no userdb { args = username_format=%u /usr/local/etc/dovecot/passwd.dovecot driver = passwd-file } When I try get mail from my machine from another computer I get nothing What's up? Thanks

5 6

[Dovecot] Questiosn about dbox
by Javier de Miguel Rodríguez 26 Jan '11

26 Jan '11

Hello I have read carefully about dbox (/http://wiki2.dovecot.org/MailboxFormat/dbox/) and I have some questions: - One of the main advantages (speed wise) of dbox over maildir is that index files are the only storage for message flags and keywords. What happens when we want to recover some messages from backup? With maildir we can rebuild message indexes, but I am not sure about dbox. Should we also restore "old indexes" and merge with the "new indexes" in order to restore the deleted messages? - The previous question applies to sdbox and mdbox. In the case of mdbox, we can configure rotation of files using /mdbox_rotate_size/ . We would like to rotate daily, not based in size (our users ask us for yesterday's backup). How can we accomplish this? We have now 17.000.000 messages in our maildir, almost 1.5 TB (zlib compresssion enabled). Our backup time with bacula is rather bad: 24 hours for a full backup, most of the time the backup is busy fstat'ing all those little messages. We think that mdbox can help us in this. Does anybody has good experiences migrating from maildir->mdox in "large" enviroments? What about mdox performance & reliability? Thank you for your support Javier

5 10

[Dovecot] Offtopic: Mac Mail Autoconfigure
by stefan novak 26 Jan '11

26 Jan '11

Hello, i know its a little bit Offtopic, but i know many Mailadmins are reading here ;) Does anybody know howto autoconfigure Mac Mail als ISP Provider. We have troubles with the default Settings of Mac Mail (POP3s with APOP) and want to change them via autodiscover. Is there something simular to Thunderbirds Config Site: https://developer.mozilla.org/en/Thunderbird/Autoconfiguration google just offers similar problems, but no solutions :( http://groups.google.com/group/macenterprise/browse_thread/thread/a88294331… thx for your help Stefan

3 3

[Dovecot] authentication methods : pam, passwd and then backup question. How to restrict the methods
by J4K 25 Jan '11

25 Jan '11

Dear all, I noticed that incoming users were attempting to authenicate using several methods like pam sql. Eventually, they logged in. Is there a way for dovecot to only query a mysql backup for users, and skip the other methods? Examples from logs (via Roundcube webmail in this case, but the same messages appear with port 993) Jan 25 17:22:17 srv dovecot: auth-worker(default): pam(aa(a)bb.co.uk,127.0.0.1): pam_authenticate() failed: Authentication failure (password mismatch?) Jan 25 17:22:17 srv dovecot: auth(default): passwd(aa(a)bb.co.uk,127.0.0.1): unknown user Jan 25 17:22:17 srv dovecot: imap-login: Login: user=<aa(a)bb.co.uk>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured As shown above, the user uses pam, passwd and then finally the user account fetched from mysql. The distribution is Debian Squeeze. Regards, s

2 7

[Dovecot] dovecot ocf resource script
by jeroen＠intuxicated.org 25 Jan '11

25 Jan '11

Hi, I created a dovecot resource script for pacemaker. I think it's done, but I wanted to ask if some people could examine it before I send it to the pacemaker people. Thanks in advance. Best regards, Jeoren Koekkoek

1 0

[Dovecot] Panic in 2.0.9 imap-client
by Thierry de Montaudry 25 Jan '11

25 Jan '11

Hi, Yesterday I upgraded one of our system from 2.0.7 to 2.0.9, I've got about 5 panic since then. It is using the exact same config (see attached) and was compiled the same way. Any clue on the reason? And how can I fix that? Jan 17 12:06:20 server dovecot: imap(XXXX@YYYYYYY): Panic: file imap-client.c: line 570 (client_continue_pending_input): assertion failed: (!client->handling_input) Jan 17 12:06:20 server dovecot: imap(XXXX@YYYYYYY): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0 [0x382be3b620] -> /usr/lib64/dovecot/libdovecot.so.0 [0x382be3b676] -> /usr/lib64/dovecot/libdovecot.so.0 [0x382be3ab33] -> dovecot/imap [0x40f766] -> dovecot/imap(cmd_idle+0xc5) [0x40a825] -> dovecot/imap [0x40f2ec] -> dovecot/imap [0x40f3a2] -> dovecot/imap(client_handle_input+0x3f) [0x40f4ef] -> dovecot/imap(client_input+0x62) [0x40fe62] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_call_io+0x48) [0x382be45e78] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0xd5) [0x382be471b5] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x2d) [0x382be45e0d] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x382be34c33] -> dovecot/imap(main+0x1d8) [0x417948] -> /lib64/libc.so.6(__libc_start_main+0xf4) [0x3ac341d994] -> dovecot/imap [0x408179]

3 5

[Dovecot] shared namespace subscription
by adrian.stoica＠dacris.net 25 Jan '11

25 Jan '11

I test dovecot 2.0.9 and i use a shared namespace. I use this to see inbox for user2 in shared namespace for user1. When user2 unsubscribe for inbox , the shared inbox disapear too from shared namespace in user1 list. This is normal ? I believe that whatever subscription has user2 , if the director is shared , only the indexes will be copyied from the original place, not along with the subscription.

2 1

[Dovecot] custom maildir location mapping
by Vlad Mazek 25 Jan '11

25 Jan '11

Greetings, I'm migrating from a sendmail/dovecot setup with system users to a postfix/dovecot maildir setup with virtual users. To simplify the mess we've gotten into by having users that can't remember their username, we've switched to email address being the username. In order to allow for a smooth migration, I need to allow users to be able to login with their email address as well as their (old) username for about a month or so. I have all the usernames, email addresses and passwords stored in SQL and I'm generating the userdb and passworddb manually. Is there any way to create a userdb and passworddb so that users can login with either username or email address and have dovecot locate their maildir without an issue? For example, I'd like to be able to login as either vlad or vlad(a)vladville.com and have dovecot locate my maildir:/var/spool/mail/%d/%n; I'd really appreciate any thoughts, ideas and examples anyone is willing to share. I'm really looking to avoid a shotgun approach ("On Feb 1, your new username is your email address"). Here are some notes on the currently functioning setup: I'm running dovecot 1.0.7 on CentOS 5.5 x64 with Postfix 2.3.3 mail_location = maildir:/var/spool/mail/%d/%n userdb static { args = uid=virtual gid=virtual home=/var/mail/%d/%u } passdb passwd-file { args = /etc/dovecot/passwd } user@domain.com:{HMAC-MD5}1b05f379...

2 2

[Dovecot] PAM problem with virtual domain/user ownership
by Mauricio Tavares 25 Jan '11

25 Jan '11

I am running dovecot 1.2.9 (ubuntu package, not from source) and wanted to use pam to authenticate my mail users who have no local accounts. I've done that before in an earlier release of dovecot and ubuntu, so I would not need to do set dovecot to ask LDAP directly. So, I have in dovecot.conf: # Authentication processes mechanisms = plain login passdb pam { args = "*" } userdb static { args = allow_all_users uid=virtual gid=virtual home=/var/spool/vmail/domain.com/%n } i.e. /var/spool/vmail/domain.com/ is owned by virtual:virtual, drwxr-x--- 4 virtual virtual 4.0K 2011-01-23 11:45 domain.com and that is how I would hope dovecot would be trying to login as. When I tried to login as user raub, the log file seems to tell me that it is trying to create /var/spool/vmail/domain.com/raub/cur as raub:users, not as virtual:virtual Jan 22 06:35:02 mail dovecot: imap-login: Login: user=<raub>, method=PLAIN, rip=216.155.101.90, lip=216.155.101.94, TLS Jan 22 06:35:02 mail dovecot: IMAP(raub): mkdir(/var/spool/vmail/domain.com/raub/cur) failed: Permission denied (euid=5016(raub) egid=100(users) missing +w perm: /var/spool/vmail/domain.com) What am I missing here?

2 1

[Dovecot] SSD drives are really fast running Dovecot
by Marc Perkel 24 Jan '11

24 Jan '11

I just replaced my drives for Dovecot using Maildir format with a pair of Solid State Drives (SSD) in a raid 0 configuration. It's really really fast. Kind of expensive but it's like getting 20x the speed for 20x the price. I think the big gain is in the 0 seek time. Here's what I bought. Crucial RealSSD C300 CTFDDAC256MAG-1G1 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD) <http://www.newegg.com/Product/Product.aspx?Item=N82E16820148349> * 2.5" * 256GB * SATA III * *Sequential Access - Read:* 355MB/sec (SATA 6Gb/s) 265MB/sec (SATA 3Gb/s) * *Sequential Access - Write:* 215MB/sec (SATA 6Gb/s) 215MB/sec (SATA 3Gb/s) * *Power Consumption (Active):* 2.1W READ, 4.3W WRITE * *Power Consumption (Idle):* 0.094W Running it on an Asus motherboard that supports SATA III - 6 core AMD CPU and 16 gigs of ram. Might be slightly off topic but this server screams!

30 82

[Dovecot] How to enable COPY and APPEND commands separately
by Alex Cherniak 24 Jan '11

24 Jan '11

I'd like to allow a user to move messages between his folders on Dovecot IMAP account, but prevent move/copy from different accounts (Exchange in particular). Outlook uses "xx UID COPY 1 folder" and then "xx UID STORE 1 +FLAGS (\Deleted \Seen)" for internal moves and "xx APPEND folder" for external ones. I tried to achieve this with ACL, but i (insert) seems to control both. Do I miss something? Should I look somewhere else? Please help.

3 3

[Dovecot] Initial Maildir directories
by Mauricio Tavares 24 Jan '11

24 Jan '11

Is there a way to specify additional directories to be created when a new user account is, well, created?

2 1

[Dovecot] Dovecot Update on Ubuntu from 1.0.10 to 1.2 doesn't work
by franc walter 24 Jan '11

24 Jan '11

Hello, i have an ubuntu 8.04 LTS Virtual Server with Dovecot 1.0.10 and postfix. Now i tried to update Dovecot because i need Quota, which is not possible in 1.0 but in 1.2 So i added the packages to my /etc/apt/sources.list: deb http://codex.xiaoka.com/apt hardy main restricted deb http://archive.ubuntu.com/ubuntu hardy-backports main universe multiverse restricted and updated dovecot with aptitude. After this i killed the proc master and restarted postfix and dovecot but now dovecot is running but doesn't get any more mails from postfix. I had to downgrade back to 1.0.10 and after this all is working again. I immediately looked into the mail.log, but i didn't see any clear errors. I uploaded the mail.log here, maybe someone could give me a hint, what it could be: http://7fw.de/tmp/2011-01-24-23-38-mail.log I started the update at 2011-01-23 at 23:00 and downgraded back at 2011-01-24 at 00:26. In the error.log i only have errors about inotify, which is not available on the ubuntu server (old kernel version, cannot be updated by provider). I set in dovecot.conf: mail_debug=yes auth_debug=yes auth_debug_passwords=yes but this didn't help me. Thank you, Kind regards, franc walter

2 3

[Dovecot] Using dsync+imapc for migration from other IMAP servers to Dovecot
by Timo Sirainen 24 Jan '11

24 Jan '11

Dovecot v2.1 hg (http://hg.dovecot.org/dovecot-2.1) now supports doing e.g.: dsync -o plugin/imapc_user=remote.user(a)example.com -o plugin/pass=remote-password mirror imapc:imap.example.com dsync will preserve message UIDs and UIDVALIDITY/UIDNEXT values for mailboxes, just like with all other storage backends. A couple of bad things: 1) It currently fetches one message at a time from server. Very slow.. Will be fixed some day. 2) You can't do incremental sync, because dsync relies on message GUIDs, which aren't available in IMAP protocol. This could be fixed some day. Also a support for Dovecot extension could be added some day to make this work for Dovecot as remote IMAP server.

1 0

[Dovecot] Does dsync handle client-side deletions?
by Patrick Schoenfeld 21 Jan '11

21 Jan '11

Hi there, I'm currently evaluating the idea of a multi-master setup where each node shall hold a full copy of the mailboxes. Basically the idea is to use NFS and dsync to keep those copies in sync. So I did some tests with dsync and ran into a problem. Consider the following scenario: 1) Location1 and Location2 are in sync 2) A mail gets deleted on Location1 (via IMAP) 3) dsync mirror run to sync the two locations Expected behaviour: dsync notices that the mail was deleted on Location1 and also deletes it on Location2 to get the locations in sync. What I experience, however, is: dsync notices that the mail is missing on Location2 and copies it from Location1 to get the locations in sync. (At least) In debug mode it will spit a warning: dsync(test2): Info: INBOX: highest_modseq changed: 8 != 11 dsync(test2): Info: INBOX: Couldn't keep all uids dsync(test2): Info: INBOX: Ignored 1 modseq changes dsync(test2): Warning: Mailbox changes caused a desync. You may want to run dsync again. Now the question is: Doesn't dsync handle deletions or is there something I missed? Dovecot version is 2.0.9. Thanks in advance and best Regards, Patrick

3 2

[Dovecot] utility to update indexes ?
by Jan-Frode Myklebust 21 Jan '11

21 Jan '11

We have both dovecot and a webmail application that are both modifying our users maildirs, so dovecot indexes can be out of sync when the webmail has been messing with the maildirs. We also have a webservice that report how many unread messages a user has in his inbox, which is simply counting files in the maildirs (plus caching the result, and present old values if the directory timestamps hasn´t changed). I think this checking of unread messages webservice would be much nicer on the filesystem if it instead used the dovecot indexes, so I created a small utility based on utils/idxview.c that do that: http://blag.tanso.net/code/unread.c But this woun´t work if the maildir has been modified outside of dovecot (i.e. webmail usage). Are there any simple interface I can use in this short snippet for noticing that the index is out of sync, and update it ? -jf

3 6

[Dovecot] LMTP & home, chroot, mail userdb fields.
by Lev Serebryakov 21 Jan '11

21 Jan '11

Hello, Dovecot. I'm using postfix + dovecot with pure virtual users. postfix uses standard virtual transport, and dovecot fetches such fields from userdb: chroot: "/usr/home/hosted/v-mail/%d/%n" home: "/" mail: "maildir:." Everything works Ok -- dovecot founds users' mail. Now, after upgrade to dovecot2, I want to use it LMTP server as virtual_transport in postifx. I've changed virtual_transport setting to "lmtp:unix:/var/run/dovecot/lmtp". dovecot's LMTP can not deliver messages, because it seems that it uses userdb fields in some OTHER way. Errors look like this: Jan 20 12:19:25 lmtp(38939): Info: Connect from local Jan 20 12:19:25 auth: Info: mysql: Connected to /tmp/mysql.sock (mailhost) Jan 20 12:19:25 lmtp(38939, lev(a)domain.com) Error: mkdir(./cur) in directory /var/run/dovecot failed: Permission denied (euid=30000(v-mail) egid=30000(v-mail) missing +w perm: ., euid is not dir owner) Jan 20 12:19:25 lmtp(38939, lev(a)domain.com) Error: Opening INBOX failed: Mailbox doesn't exist: INBOX Jan 20 12:19:25 lmtp(38939, lev(a)domain.com) Error: mkdir(./cur) in directory /var/run/dovecot failed: Permission denied (euid=30000(v-mail) egid=30000(v-mail) missing +w perm: ., euid is not dir owner) Jan 20 12:19:25 lmtp(38939, lev(a)domain.com) Info: XXVtE00oOE0bmAAAWL5c8Q: msgid=unspecified: save failed to INBOX: Internal error occurred. Refer to server log for more information. [2011-01-20 12:19:25] Jan 20 12:19:25 lmtp(38939, lev(a)domain.com) Error: BUG: Saving failed to unknown storage Jan 20 12:19:25 lmtp(38939): Info: Disconnect from local: Client quit How should I change my userdb output to make both POP/IMAP and LMTP processes happy? -- // Black Lion AKA Lev Serebryakov <lev(a)serebryakov.spb.ru>

3 8