- dovecot - dovecot.org

[Dovecot] v2.0.4 released
by Timo Sirainen 28 Sep '10

28 Sep '10

http://dovecot.org/releases/2.0/dovecot-2.0.4.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.4.tar.gz.sig multi-dbox users: Be careful about the INDEX change. Maildir users: I hope v2.0 is now finally stable. * multi-dbox: If :INDEX=path is specified, keep storage/dovecot.map.index* files also in the index path rather than in the main storage directory. WARNING: if you specified :INDEX= with earlier mdbox installation, you must now manually move the storage indexes to the expected directory! Otherwise Dovecot won't see them and will rebuild the indexes, possibly unexpunging some mails. - Maildir: Copying messages with hard links sometimes caused the source maildir's entire tmp/ directory to be renamed to destination maildir as if it were a message. - Maildir: v2.0.3 broke expunging copied messages sometimes - Maildir: INBOX whose tmp/ directory was lost couldn't be opened - single-dbox: Messages weren't copied with hard links - vpopmail support is hopefully working again. - dsync: POP3 UIDLs weren't copied with Maildir - dict file: Fixed fd leak (showed up easily with LMTP + quota)

8 17

[Dovecot] dsync is seriously broken when syncing maildir and mdbox
by interfaSys sàrl 28 Sep '10

28 Sep '10

Hello, I thought mdbox was production ready, but it seems to me that (in 2.0.4) it's quite broken. 1) The documentation only running this to convert from maildir to mdbox: *dsync mirror maildir:~/Maildir* but based on my experience and on posts on the mailing list, it's not enough. A namespace has to be defined and it's not clear whether / or . should be used as a separator. I tried with a dot first and the INBOX folders were empty. It seemed to work better with / 2) After having defined a namespace, running dsync again makes it spit tons of errors Error: Can't rename mailbox INBOX_28c716242e53784cc9030100d3b51c5c to INBOX: Target mailbox already exists Error: Mailboxes don't have unique GUIDs: 4536121fce3ca14cf8c40000d3b51c5c is shared by INBOX and INBOX_4536121fce3ca14cf8c40c Info: INBOX/spam: only in dest Info: INBOX: only in source Each run will create more folders with GUIDs attached to the folder name. 3) Deleting these folders after having moved their content to the properly named ones seems impossible. I see a long list of folders in the bin and when I hit "Empty bin" in Thunderbird, nothing happens. There must must be a caching issue, because if I click on the folder, I'm told these folders don't exist. If I dsync again, I still have conflicts, with folders that are in the bin and then with new copies of INBOX Error: Mailboxes don't have unique GUIDs: 4536121fce3ca14cf8c40000d3b51c5c is shared by INBOX and Trash/INBOX_4536121fce3ca14c Error: Mailboxes don't have unique GUIDs: 4536121fce3ca14cf8c40000d3b51c5c is shared by INBOX_4536121fce3ca14cf8c40000d3b51c5c At that stage, the newly created INBOXes cannot be deleted because they already exist in the bin. I renamed those folders, moved them to the bin, emptied the bin And it's still not fixed when running dsync Error: Mailboxes don't have unique GUIDs: 1a6f000a9751784c12030100d3b51c5c is shared by Sent and Trash/5 Info: Trash_INBOX_bb088f159336a14cc6bf0000d3b51c5c: only in dest Error: Can't rename mailbox INBOX to Trash_3: Renaming INBOX isn't supported. Why can't folder properly be deleted? I never had that problem with Maildir. Cheers, Olivier

2 3

[Dovecot] Command to get proxy connection count
by Brad Davidson 28 Sep '10

28 Sep '10

Timo, I'm trying to get a count of active proxy sessions on a given Director. I can of course enable verbose_proctitle and parse the 'N connections' string out of ps output or /proc/pid/cmdline. Is there a better way to do that, perhaps with doveadm? Goes back to needing a command for proxy and director ring status, I guess. -Brad

2 1

[Dovecot] Can't delete certain messages
by Karl Davenport 28 Sep '10

28 Sep '10

Running Dovecot version 1.0.10 on Ubuntu Server 8.04 amd64 (ext3). Some users have emails that will not go away. They delete them and the message is moved to the trash folder only to reappear when the mailbox is refreshed. Moving the message manually to another folder has the same effect. We are running Thunderbird as our email client, though I have tried using other clients to remove the messages. Here is my config: # 1.0.10: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no mail_privileged_group: mail mail_location: maildir:/home/%u/Maildir mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 imap_client_workarounds(default): tb-extra-mailbox-sep imap_client_workarounds(imap): tb-extra-mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: passdb: driver: pam userdb: driver: passwd #End dovecot.conf Thanks in advance. -- Karl Davenport WaveCom Communications karl(a)wavecom-it.com 435-656-0972

4 3

[Dovecot] mail_fsync=never doesn't work?
by Attila Nagy 28 Sep '10

28 Sep '10

Hello, I've tried to set the above in Dovecot 2.0.3, but according to ktrace (FreeBSD) it still fsync()s a lot (pop3 processes for example). Is this switch useful at all?

3 11

[Dovecot] Statistics
by Pierre 28 Sep '10

28 Sep '10

HI list, According to this: http://webcache.googleusercontent.com/search?q=cache:QMGLz9SVNdwJ:www.dovec… << # Use statistics to automatically distribute heavy users to different servers * v1.2 can export very detailed statistics via plugin >> I can't find this "detailed statistics" plugin, I only found this: http://www.dovecot.org/patches/2.0/stats-plugin.c But it only seems to add a "stats" IMAP command. Please can somebody confirm or give me a link to this plugin ? I really need to identify "heavy" users,so this plugin may be really usefull for me. Thanks a lot, Pierre

2 1

[Dovecot] dovecot 2.0.4 lmtp seg fault
by Mike Constabel 28 Sep '10

28 Sep '10

Hi, lmtp crashes with segfault. # 2.0.4 (d75a01131ddc): /etc/dovecot/dovecot.conf # OS: Linux 2.6.35.5 x86_64 Debian squeeze/sid auth_debug = yes auth_mechanisms = plain login auth_username_format = %Ln auth_verbose = yes debug_log_path = /var/log/dovecot/dovecot-debug.log info_log_path = /var/log/dovecot/dovecot-info.log log_path = /var/log/dovecot/dovecot.log mail_debug = yes mail_location = mdbox:~/mdbox mail_plugins = quota zlib managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve zlib_save = bz2 zlib_save_level = 6 } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { mode = 0600 } user = root } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol lmtp { mail_plugins = quota zlib sieve } protocol imap { mail_plugins = quota zlib imap_quota } herakles:/usr/lib/dovecot# gdb lmtp GNU gdb (GDB) 7.0.1-debian Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/lib/dovecot/lmtp...Reading symbols from /usr/lib/debug/usr/lib/dovecot/lmtp...done. (no debugging symbols found)...done. (gdb) r Starting program: /usr/lib/dovecot/lmtp [Thread debugging using libthread_db enabled] Debug: none: root=, index=, control=, inbox= 220 herakles.zh.local Dovecot LMTP ready Info: Connect from local mail from:<vejoun(a)herakles.zh.local> 250 2.1.0 OK rcpt to:<vejoun(a)herakles.zh.local> Debug: Loading modules from directory: /usr/lib/dovecot/modules Debug: Module loaded: /usr/lib/dovecot/modules/lib10_quota_plugin.so Debug: Module loaded: /usr/lib/dovecot/modules/lib20_zlib_plugin.so Debug: Module loaded: /usr/lib/dovecot/modules/lib90_sieve_plugin.so Debug: auth input: vejoun system_groups_user=vejoun uid=1000 gid=1000 home=/home/vejoun Debug: changed username to vejoun 250 2.1.5 OK data 354 OK foo . lmtp(7066, vejoun): Debug: Effective uid=1000, gid=1000, home=/home/vejoun lmtp(7066, vejoun): Debug: quota: No quota setting - plugin disabled lmtp(7066, vejoun): Debug: fs: root=/home/vejoun/mdbox, index=, control=, inbox= Program received signal SIGSEGV, Segmentation fault. 0x00007ffff64db722 in quota_get_mail_user_quota (user=<value optimized out>) at quota-storage.c:436 436 quota-storage.c: Datei oder Verzeichnis nicht gefunden. in quota-storage.c (gdb) bt full #0 0x00007ffff64db722 in quota_get_mail_user_quota (user=<value optimized out>) at quota-storage.c:436 No locals. #1 0x00007ffff64db841 in quota_mailbox_list_created (list=0x6596e0) at quota-storage.c:509 qlist = <value optimized out> quota = <value optimized out> root = <value optimized out> #2 0x00007ffff7b44082 in hook_mailbox_list_created (list=0x6596e0) at mail-storage-hooks.c:295 hooks__foreach_end = 0x656020 hooks = 0x656000 ctx = 0x659f30 #3 0x00007ffff7b47dc2 in mailbox_list_create (driver=<value optimized out>, ns=0x64be00, set=<value optimized out>, flags=0, error_r=<value optimized out>) at mailbox-list.c:197 list = <value optimized out> idx = 3 __FUNCTION__ = "mailbox_list_create" #4 0x00007ffff7b437d9 in mail_storage_create (ns=0x64be00, driver=<value optimized out>, flags=0, error_r=0x7fffffffe838) at mail-storage.c:295 storage_class = 0x7ffff7dddce0 storage = <value optimized out> list_set = {layout = 0x7ffff7bb7f43 "fs", root_dir = 0x60ac80 "/home/vejoun/mdbox", index_dir = 0x0, control_dir = 0x0, alt_dir = 0x0, inbox_path = 0x0, subscription_fname = 0x7ffff7bbdba5 "subscriptions", maildir_name = 0x7ffff7bbef12 "dbox-Mails", mailbox_dir_name = 0x7ffff7bbef1d "mailboxes"} data = <value optimized out> p = <value optimized out> __FUNCTION__ = "mail_storage_create" #5 0x00007ffff7b3d91c in mail_namespaces_init (user=0x6556d0, error_r=<value optimized out>) at mail-namespace.c:371 mail_set = 0x655b60 namespaces = 0x0 ns = <value optimized out> ns_p = 0x7ffff7bb4fee inbox_set = 0x656038 unexpanded_inbox_set = 0x656088 error = <value optimized out> driver = 0x0 location_source = 0x7ffff7bb4fee "mail_location setting" i = <value optimized out> count = 32767 __FUNCTION__ = "mail_namespaces_init" #6 0x00007ffff7b4a111 in mail_storage_service_init_post (ctx=0x61a500, user=0x631118, mail_user_r=<value optimized out>) at mail-storage-service.c:460 mail_set = <value optimized out> mail_user = 0x6556d0 #7 mail_storage_service_next (ctx=0x61a500, user=0x631118, mail_user_r=<value optimized out>) at mail-storage-service.c:897 user_set = <value optimized out> home = 0x6316a1 "/home/vejoun" chroot = 0x60a852 "1000" error = <value optimized out> len = <value optimized out> temp_priv_drop = true #8 0x00000000004055ae in client_deliver (client=0x61ada0) at commands.c:450 storage = 0xfaf mail_error = MAIL_ERROR_NONE dctx = {pool = 0x61a0d00000001b, set = 0x0, dup_ctx = 0x61ada0, session_id = 0x61b710 "\001", src_mail = 0x0, src_envelope_sender = 0x61ada0 "", dest_user = 0x4078e9, dest_addr = 0x7fffffffea1c "", final_dest_addr = 0x0, dest_mailbox_name = 0x0, dest_mail = 0x61b820, tried_default_save = 104, saved_mail = 236, save_dest_mail = 109} input = <value optimized out> sets = <value optimized out> error = <value optimized out> #9 client_deliver_next (client=0x61ada0) at commands.c:515 rcpts = 0x61b950 #10 client_input_data_write_local (client=0x61ada0) at commands.c:613 src_mail = 0x64fc60 old_uid = 0 first_uid = 4294967295 #11 client_input_data_write (client=0x61ada0) at commands.c:718 input = 0x637d20 #12 client_input_data_handle (client=0x61ada0) at commands.c:804 data = <value optimized out> size = 1 ret = <value optimized out> #13 0x00007ffff76d5ca5 in io_loop_handler_run (ioloop=<value optimized out>) at ioloop-epoll.c:212 ctx = 0x619540 event = 0x6195b0 list = 0x61a0d0 io = 0x61b820 tv = {tv_sec = 299, tv_usec = 999484} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 call = <value optimized out> #14 0x00007ffff76d4dc8 in io_loop_run (ioloop=0x612670) at ioloop.c:350 ---Type <return> to continue, or q <return> to quit--- No locals. #15 0x00007ffff76c49e3 in master_service_run (service=0x612540, callback=0x28) at master-service.c:496 No locals. #16 0x0000000000404434 in main (argc=1, argv=0x612370) at main.c:120 set_roots = {0x6098a0, 0x408280, 0x0} service_flags = <value optimized out> storage_service_flags = 675 c = <value optimized out> (gdb)

2 1

[Dovecot] dovecot 2.0.4 imap service error
by Nishant Limbachia 28 Sep '10

28 Sep '10

Just upgraded from 2.0.3 to 2.0.4 and getting this message in the logs (repeated several times) master: Error: service(imap): child 9631 killed with signal 11 I'm using mdbox and had no problems using 2.0.3 until I upgraded this morning. I understand there were some Index changes and I'm not keeping indexes in a separate directory. but still I've made this change to configuration file. mail_location = mdbox:/var/mail/mdbox/%u:INDEX=/var/mail/mdbox/%u instead of mail_location = mdbox:/var/mail/mdbox/%u Here's the dovecot.log from last few minutes. Sep 27 16:08:14 imap: Debug: Added userdb setting: mail=mdbox:/var/mail/mdbox/raghu Sep 27 16:08:14 IMAP(raghu): Debug: Effective uid=xxxx, gid=xxx, home=/home/raghu Sep 27 16:08:14 IMAP(raghu): Debug: quota: No quota setting - plugin disabled Sep 27 16:08:14 IMAP(raghu): Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:/var/mail/mdbox/raghu:INDEX=/var/mail/mdbox/raghu Sep 27 16:08:14 IMAP(raghu): Debug: fs: root=/var/mail/mdbox/raghu, index=, control=, inbox= Sep 27 16:08:14 master: Error: service(imap): child 9684 killed with signal 11 (core dumps disabled) Sep 27 16:08:14 imap-login: Info: Login: user=<raghu>, method=PLAIN, rip=192.168.1.5:43444, lip=192.168.1.2:10943, TLS, TLSv1 with cipher AES256-SHA (256/256 bits) Sep 27 16:08:14 imap: Debug: Loading modules from directory: /usr/lib64/dovecot Sep 27 16:08:14 imap: Debug: Module loaded: /usr/lib64/dovecot/lib10_quota_plugin.so Sep 27 16:08:14 imap: Debug: Module loaded: /usr/lib64/dovecot/lib11_imap_quota_plugin.so Sep 27 16:08:14 imap: Debug: Module loaded: /usr/lib64/dovecot/lib11_trash_plugin.so Sep 27 16:08:14 imap: Debug: Module loaded: /usr/lib64/dovecot/lib20_autocreate_plugin.so Sep 27 16:08:14 imap: Debug: Module loaded: /usr/lib64/dovecot/lib20_fts_plugin.so Sep 27 16:08:14 imap: Debug: Module loaded: /usr/lib64/dovecot/lib21_fts_squat_plugin.so Sep 27 16:08:14 imap: Debug: Added userdb setting: mail=mdbox:/var/mail/mdbox/raghu Sep 27 16:08:14 IMAP(raghu): Debug: Effective uid=1000, gid=100, home=/home/raghu Sep 27 16:08:14 IMAP(raghu): Debug: quota: No quota setting - plugin disabled Sep 27 16:08:14 IMAP(raghu): Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:/var/mail/mdbox/raghu:INDEX=/var/mail/mdbox/raghu Sep 27 16:08:14 IMAP(raghu): Debug: fs: root=/var/mail/mdbox/raghu, index=, control=, inbox= Sep 27 16:08:14 master: Error: service(imap): child 9686 killed with signal 11 (core dumps disabled)

2 2

[Dovecot] Fixed mailbox id?
by Dieter Knopf 28 Sep '10

28 Sep '10

Hello, I have many Sieve rules and searching for a way to "track" renamings/moving of mailboxes (folders) on my IMAP server. Is there a unique ID for every folder available? I don't think there, i found no ID inside my folders :( If not, it think i need to create a ID-file for every folder and after that i can track the folders and update the rules =) Thanks

2 3

[Dovecot] AntiSpam Plugin
by Leander S. 28 Sep '10

28 Sep '10

Hi, I don't remember how to turn off debugging for AntiSpam plugin ... it still writes it's debug output to /var/log/debug.log ... But everything works fine now - so it can be turned off since it just wastes my Memory ... Thanks & Regards

1 0

[Dovecot] Need more info on new fsync switch
by interfaSys sàrl 27 Sep '10

27 Sep '10

Hello, I wanted to improve performance by disabling fsync where I can, but the example in the Wiki is outdated http://wiki2.dovecot.org/MailLocation/LocalDisk # Enable for IMAP/POP3 fsync_disable = yes protocol lda { # Disable for LDA/LMTP fsync_disable = no } Can that simply be replaced by the default config which is mail_fsync = optimized Or should it be replaced by # Enable for IMAP/POP3 mail_fsync = never protocol lda { # Disable for LDA/LMTP mail_fsync = optimized } Cheers, Olivier

2 2

[Dovecot] Postfix SASL Auth
by siefke＠email.de 27 Sep '10

27 Sep '10

Hello, i use Postfix (2.7.1) and Dovecot (1.2.14) on my FreeBSD Server. I use Postfixadmin and Virtuell User. The login going without problems, but the SASL Auth want not work. Have someone a Idea? Regards Silvio #postconf -a dovecot # postconf -n alias_maps = hash:/etc/aliases allow_percent_hack = no biff = no command_directory = /usr/sbin config_directory = /etc/postfix content_filter = amavisfeed:[127.0.0.1]:10024 daemon_directory = /usr/libexec/postfix data_directory = /var/db/postfix disable_vrfy_command = yes home_mailbox = Maildir/ html_directory = /usr/share/doc/postfix mail_owner = postfix mailbox_size_limit = 102400000 mailq_path = /usr/bin/mailq manpage_directory = /usr/share/man masquerade_exceptions = root message_size_limit = 20480000 mydestination = $myhostname, localhost mydomain = silviosiefke.de myhostname = hetzner.silviosiefke.de mynetworks = 127.0.0.0/8 newaliases_path = /usr/bin/newaliases queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix recipient_delimiter = + sample_directory = /etc/postfix sendmail_path = /usr/sbin/sendmail setgid_group = maildrop smtp_tls_note_starttls_offer = yes smtp_use_tls = no smtpd_client_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unknown_reverse_client_hostname, permit smtpd_data_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_pipelining, permit smtpd_delay_reject = yes smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_invalid_helo_hostname, reject_non_fqdn_helo_hostname, permit smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_recipient, reject_unknown_recipient_domain, reject_unauth_destination, reject_rbl_client bl.spamcop.net, reject_rbl_client sbl-xbl.spamhaus.org, permit smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_sender_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_sender, reject_unknown_sender_domain, permit smtpd_tls_cert_file = /etc/postfix/ssl/smtp.pem smtpd_tls_key_file = /etc/postfix/ssl/smtp.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = no soft_bounce = yes tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 550 virtual_alias_maps = proxy:mysql:/etc/postfix/mysql/mysql_virtual_alias_maps.cf virtual_gid_maps = static:125 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql/mysql_virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql/mysql_virtual_mailbox_maps.cf virtual_minimum_uid = 125 virtual_transport = virtual virtual_uid_maps = static:125 <dovecot.conf> base_dir = /var/run/dovecot/ protocols = imap imaps pop3s disable_plaintext_auth = no log_timestamp = "%Y-%m-%d %H:%M:%S " mail_debug = yes mail_location = maildir:/home/vmail/%d/%n mail_access_groups = mail first_valid_uid = 125 first_valid_gid = 125 log_path = /var/log/dovecot/dovecot.log info_log_path = /var/log/dovecot/dovecot-info.log ssl = yes ssl_cert_file = /etc/postfix/ssl/mail_silviosiefke_de.crt ssl_key_file = /etc/postfix/ssl/mail_silviosiefke_de.key protocol imap { } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } protocol lda { postmaster_address = hostmaster at silviosiefke.de } auth default { mechanisms = digest-md5 plain login passdb sql { args = /usr/local/etc/dovecot-db.conf } userdb sql { args = /usr/local/etc/dovecot-db.conf } user = root socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = postfix #group = vmail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } driver = mysql connect = dbname=postifx user= host=localhost password= default_pass_scheme = MD5-CRYPT password_query = SELECT password FROM mailbox WHERE username = '%u' user_query = SELECT maildir, 125 AS uid, 125 AS gid FROM mailbox WHERE username = '%u' Logeintrag: Sep 25 23:23:55 hetzner postfix/smtpd[86111]: connect from unknown Sep 25 23:23:57 hetzner postfix/smtpd[86111]: warning: unknown: SASL PLAIN authentication failed: Sep 25 23:23:59 hetzner postfix/smtpd[86111]: warning: unknown: SASL LOGIN authentication failed: UGFzc3dvcmQ6 Sep 25 23:24:01 hetzner postfix/smtpd[86111]: disconnect from unknown

3 2

[Dovecot] Meaning of mail_max_userip_connections?
by Harald Strack 27 Sep '10

27 Sep '10

Hi, I set mail_max_userip_connections in our IMAP configuration to mail_max_userip_connections = 10 to allow users 10 parallel connections. It seems that this also limits the amount of parallel connections from one IP but different users?! Our users mostly accessing the IMAP server by a webmailer or proxies. Thus, all users (>10000) come from only 5 different IP. However, I got a lot of complaints about denied connections after setting mail_max_userip_connections = 10. Am I right with the meaning of this parameter? Thanks in advance Harry

3 7

[Dovecot] Error: Opening INBOX failed: Mailbox doesn't exist: INBOX
by Christian Felsing 26 Sep '10

26 Sep '10

Hello, there is one user which has a "Error: Opening INBOX failed: Mailbox doesn't exist: INBOX" problem: doveadm mailbox status -u user(a)foo.local -t all \* doveadm(user(a)foo.local): Error: Opening INBOX failed: Mailbox doesn't exist: INBOX doveadm(user(a)foo.local): Error: Opening mailbox INBOX failed: Mailbox doesn't exist: INBOX doveadm -v force-resync -u user(a)foo.local INBOX doveadm(user(a)foo.local): Error: Opening INBOX failed: Mailbox doesn't exist: INBOX doveadm(user(a)foo.local): Error: Opening mailbox INBOX failed: Mailbox doesn't exist: INBOX doveadm mailbox list -u user(a)foo.local Archiv Old Gesendete Objekte INBOX INBOX.old INBOX.ix INBOX.ct INBOX.telepolis INBOX.bild INBOX.fotos.highres INBOX.computerbild Junk-E-Mail Trash Gesendet System has several hundred users, but this is the only user on which that happens. Users client is Microsoft Outlook 2003, but there are more users which are using Microsoft Outlook 2003. dovecot -n (some parts masked with *** for privacy reasons): # 2.0.3: /opt/dovecot/etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-amd64 x86_64 Debian 5.0.6 xfs auth_master_user_separator = * auth_mechanisms = plain login auth_realms = *** auth_username_format = %Lu disable_plaintext_auth = no first_valid_uid = 124 last_valid_uid = 124 listen = [::], * log_timestamp = %Y-%m-%d %H:%M:%S login_greeting = imap4/pop3 ready. mail_location = maildir:/mail/%d/%u/Maildir mail_privileged_group = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date imapflags notify passdb { args = *** driver = passwd-file master = yes } passdb { args = /opt/dovecot/etc/dovecot/dovecot-ldap.conf driver = ldap } plugin { quota = maildir:User quota quota_rule = *:storage=500M quota_rule2 = Trash:storage=+100M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_extensions = +imapflags +notify } protocols = imap pop3 sieve lmtp service auth { client_limit = 8000 unix_listener /var/run/dovecot/auth-master { group = vmail mode = 0660 user = vmail } unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = vmail } service imap-login { process_limit = 1024 } service imap-postlogin { executable = script-login /opt/dovecot-cf/lastlogin.sh user = cadm } service imap { executable = imap imap-postlogin } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve-obsolete { port = 2000 } inet_listener sieve { port = 4190 } process_limit = 1024 } service pop3-login { process_limit = 1024 } service pop3-postlogin { executable = script-login /opt/dovecot-tools/lastlogin.sh user = cadm } service pop3 { executable = pop3 pop3-postlogin } service quota-warning { executable = script /opt/dovecot-tools/quota-warning.sh user = vmail } ssl_ca = </opt/dovecot/etc/cacert.pem ssl_cert = </opt/apache/apache/conf/ssl/cert.crt ssl_cipher_list = HIGH:MEDIUM:!SSLv2:!ADH:!aNULL:!eNULL:!NULL ssl_key = </opt/apache/apache/conf/ssl/cert.key userdb { args = /opt/dovecot/etc/dovecot/dovecot-ldap.conf driver = ldap } protocol lmtp { mail_plugins = quota sieve } protocol sieve { managesieve_logout_format = bytes ( in=%i : out=%o ) } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_uidl_format = %08Xu%08Xv } protocol lda { auth_socket_path = /var/run/dovecot/auth-master hostname = mail.foo.local lda_mailbox_autocreate = yes mail_plugin_dir = /opt/dovecot/lib/dovecot/lda mail_plugins = $mail_plugins sieve postmaster_address = postmaster(a)foo.local sendmail_path = /usr/lib/sendmail } dovecot-ldap.conf omitted, because auth works flawless. Homedir etc. looks like other users homedirs: tsnetMailHomeDir: /mail/foo.local/user(a)foo.local tsnetMailMessageStore: /mail/foo.local/user(a)foo.local/Maildir As temporary workaround user set a sieve rule to forward mail to other account. This Sieve script works. Is there a way to fix that w/o deleting that mailbox ? Christian

2 3

[Dovecot] unwanted maildir directory
by Mike Abbott 26 Sep '10

26 Sep '10

Dovecot-2.0.3 reported: Error: Maildir: Found unwanted directory /path/to/mail/user/cur/:2,FST, but rmdir() failed: Directory not empty and sure enough, this directory really does exist and contain a valid message file: # cd /path/to/mail/user/cur/ # ls -lR total 384 drwx------ 8 vmail vmail 272 Sep 24 09:06 . drwx------ 13 vmail vmail 442 Sep 24 09:06 .. -rw------- 5 vmail vmail 41045 Sep 24 08:44 1285336100.M879758P1166.my.mail.server,S=41045,W=41755:2,RST -rw------- 5 vmail vmail 41045 Sep 24 08:44 1285336100.M910424P1166.my.mail.server,S=41045,W=41755:2,RST -rw------- 5 vmail vmail 41045 Sep 24 08:44 1285336337.M656599P1166.my.mail.server,S=41045,W=41755:2,ST -rw------- 5 vmail vmail 41045 Sep 24 08:44 1285336355.M88818P1164.my.mail.server,S=41045,W=41755:2,FS -rw------- 1 vmail vmail 14953 Sep 24 09:00 1285336838.M483116P5720.my.mail.server,S=14953,W=15225:2, drwx------ 3 vmail vmail 102 Sep 24 09:00 :2,FST ./:2,FST: total 88 drwx------ 3 vmail vmail 102 Sep 24 09:00 . drwx------ 8 vmail vmail 272 Sep 24 09:06 .. -rw------- 5 vmail vmail 41045 Sep 24 08:44 1285335855.M242128P1165.my.mail.server,S=41045,W=41755 # Dovecot must have created this non-Maildir++-ish directory, but why, why in cur/ not tmp/, and why didn't it clean it up? (Not the "Directory not empty" error specifically; I mean in the larger sense.)

2 19

[Dovecot] inbox doesn't exist, and quota calculation error
by Mike Abbott 26 Sep '10

26 Sep '10

Perhaps related to the other errors I just reported, I also see a few of these in the dovecot-2.0.3 logs: lda(pid 8212 user user3): Error: Opening INBOX failed: Mailbox doesn't exist: INBOX lda(pid 8212 user user3): msgid=<201009240906510365.1gj1fpfhrhhm9@mail>: save failed to INBOX: Mailbox doesn't exist: INBOX lda(pid 8212 user user3): Error: BUG: Saving failed to unknown storage and some clients report receiving this IMAP error: tag NO Mailbox doesn't exist: INBOX although in general mail delivery and IMAP work, and these users' Maildir++ directories do exist and look OK. This error did not occur for the user1 or user2 in the other report. And here's a third kind of error: imap(pid 5722 user user4): Error: stat(/path/to/mail/user4/tmp/ͼ) failed: No such file or directory imap(pid 5722 user user4): Error: Internal quota calculation error That path looks like a memory munge.

2 3

[Dovecot] password_query, user_query and unrelated userid and emails
by Axel Luttgens 26 Sep '10

26 Sep '10

Let's say one has a SQL table with following fields for John Doe: login: u0007 password: {SHA1}... mailhome: /path/to/joeshome email: john.doe(a)example.com To log in, for internal policy reasons, John MUST make use of his userid "u0007". So, in the password_query, one would need something like: ... WHERE login = '%u' ... On the other hand, for receiving mail thru say, LMTP, one would need something like this in the user_query: ... WHERE email = '%Lu' ... With such a simplistic setup, this works fine: $ doveadm auth u0007 Password: passdb: u0007 auth succeeded but this one obviously fails: $ doveadm user u0007 userdb lookup: user u0007 doesn't exist and one has to do: $ doveadm user john.doe(a)example.com userdb: john.doe(a)example.com home : /path/to/joeshome I can't manage to devise a way to systematically refer to users thru their login, nor to avoid such messages: prefetch(u0007): passdb didn't return userd entries, trying the next userdb There sure must be a way thru adequate "SELECT ... AS ..." clauses. Could someone show me the light? Many, many TIA, Axel

2 1

[Dovecot] Settings for unlimited quota for some mailboxes
by Patrick Westenberg 26 Sep '10

26 Sep '10

Hello, I´m using Dovecot 2.0.1 with quota support (quota and imap_quota) which works perfect. However, I´d like to give some mailboxes unlimited quota. What quota setting (in the backend (SLQ)) is needed to tell Dovecot as LDA that the mailbox has unlimited quota? 0 or NULL or -1 or something else? Regards Patrick

2 1

[Dovecot] mdbox
by Daniel L. Miller 25 Sep '10

25 Sep '10

Reviewing some mailing list archives and the wiki, I still don't have a real clear picture of why I'd want to use mdbox. What I've taken from the info I've reviewed says mdbox is more complicated (than sdbox), has greater potential for breakage (simply because it's more complex), and has a theoretical performance impact depending on the exact filesystem/hardware used. Was that an accurate summary? Is mdbox something that was desired to solve a particular problem? -- Daniel

2 2

Re: [Dovecot] doveadm-expunge debug message clarifications
by LEVAI Daniel 25 Sep '10

25 Sep '10

> On Tue, 2010-09-21 at 15:09 +0200, LEVAI Daniel wrote: [...] > > doveadm(root): Debug: expire: Searching only users listed in expire database [...] > logging that. I fixed in hg so that it now instead logs: > expire: Iterating only a single user, ignoring expire database Great! > > If I don't specify a user with '-u', then nothing gets expunged, so it > > doesn't get the list of users from the expire database. > If you don't use -u or -A then it tries to access the current system > user's mails. Aha! > > doveadm(<user>): Error: net_connect_unix(/var/dovecot//dict) failed: > > Permission denied > I improved this error message now in hg to show what user doesn't have > access. Great! > > # ls -la /var/dovecot/dict > > srw------- 1 root wheel 0 Sep 21 09:47:00 2010 /var/dovecot/dict= > > .. > > What is trying to use that socket when I'm expunging mails? Am I > > supposed to grant my internal_user some privileges to that socket? > > While I got that error message, the expunge has succeeded. > doveadm tries to access the expire database via the dict socket. You > didn't really give enough information about what user you're running > doveadm as or if you're using system or virtual users or.. Sorry. I'm running that doveadm command as root, with the -u <user> parameter, where <user> is a virtual user. Anyway, I've just read the wiki2 again, and noted that I don't really need the expire plugin, because it is only needed for the -A option. If I specify the -u parameter, it doesn't utilize the plugin. So I'm now using only the doveadm expunge -u ... command, which now gives me this output: # /usr/local/bin/doveadm -D expunge -u <user> mailbox sa.* SAVEDBEFORE 1d doveadm(root): Debug: Loading modules from directory: /usr/local/lib/dovecot doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/local/lib/dovecot/doveadm doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: Cannot load specified object ^^^ I'm curious about this error message. Is it safe to ignore this? doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so doveadm(<user>): Debug: expunge: box=sa.spam uid=6435 doveadm(<user>): Debug: expunge: box=sa.spam uid=6436 doveadm(<user>): Debug: expunge: box=sa.spam uid=6437 doveadm(<user>): Debug: expunge: box=sa.spam uid=6438 The only thing I've changed in the config is that I've removed the expire plugin from the $mail_plugins variable. Thanks, Daniel -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

2 2

[Dovecot] doveadm quota recalc don't work
by Thiago Henrique 25 Sep '10

25 Sep '10

Hello, I'm testing Dovecot 2.0. I plan to use Dovecot 2.0 with thousands of domains per server. My user base is under virtual MySQL. When I run `quota doveadm recalc`, Dovecot sets quota to zero: ################################################################################ root@server:# doveadm -v quota get -u username Quota name Type Value Limit % User quota STORAGE 1166 1048576 0 User quota MESSAGE 1 - 0 root@server:# doveadm -v quota recalc -u username root@server:# doveadm -v quota get -u username Quota name Type Value Limit % User quota STORAGE 0 1048576 0 User quota MESSAGE 0 - 0 ################################################################################ My `dovecot -n` : ################################################################################ root@box5:/home/thiagoh# cat a # 2.0.3 (02a9cf90ad02): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-24-server x86_64 Ubuntu 10.04.1 LTS ext4 auth_debug = yes auth_debug_passwords = yes auth_master_user_separator = * auth_mechanisms = plain login auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@= auth_username_translation = @= auth_verbose = yes auth_verbose_passwords = plain auth_worker_max_count = 10 disable_plaintext_auth = no listen = server.com login_greeting = Dovecot ready! mail_debug = yes mail_gid = dovemail mail_location = mdbox:/home/%u mail_plugins = $mail_plugins quota mail_uid = dovemail managesieve_sieve_capability = fileinto reject envelope vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include imapflags notify mmap_disable = yes passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } passdb { args = /etc/dovecot/dovecot-sql-master.conf.ext driver = sql master = yes pass = yes } plugin { autocreate = SPAM autosubscribe = SPAM quota = maildir:User quota quota_rule = *:storage=1GB sieve = /var/lib/imap/sieve/%2.256RHu/%u/phpscript.script sieve_dir = /var/lib/imap/sieve/%2.256RHu/%u sieve_extensions = comparator-i;ascii-numeric copy envelope fileinto imapflags include notify regex reject relational subaddress vacation sieve_max_script_size = 512KB sieve_quota_max_scripts = 2 } protocols = imap pop3 lmtp sieve service auth-worker { user = $default_internal_user } service auth { process_limit = 1 process_min_avail = 1 } service imap-login { inet_listener imap { address = server.com port = 143 } } service imap { process_limit = 1024 process_min_avail = 10 } service lmtp { inet_listener { address = server.com port = 2003 } process_limit = 256 process_min_avail = 10 } service managesieve-login { inet_listener sieve { address = server.com port = 4190 } inet_listener sieve_deprecated { address = server.com port = 2000 } } service managesieve { process_limit = 20 process_min_avail = 10 } service pop3-login { inet_listener pop3 { address = server.com port = 110 } } service pop3 { process_limit = 256 process_min_avail = 10 } ssl = no userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol imap { imap_idle_notify_interval = 120 s imap_max_line_length = 65536 mail_max_userip_connections = 10 mail_plugins = $mail_plugins quota imap_quota autocreate } protocol lmtp { mail_plugins = $mail_plugins sieve quota autocreate } protocol sieve { mail_plugins = $mail_plugins sieve managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o managesieve_max_line_length = 65536 managesieve_sieve_capability = comparator-i;ascii-numeric copy envelope fileinto imapflags include notify regex reject relational subaddress vacation } protocol pop3 { mail_plugins = $mail_plugins quota autocreate } ################################################################################ I use 'mdbox' as mailbox format, but my quota backend is 'maildir'. Is there a problem? Thank you in advance. Best Regards -- []'s Thiago Henrique Network Administration Digirati Networks K8 Networks

2 1

[Dovecot] LDA + Postfix + LDAP + Sieve (Vacation): Wrong Domain in Reply
by Kendall Gifford 24 Sep '10

24 Sep '10

Hello everyone. I'm running dovecot (1.2.9) with postfix (2.7.0) on an ubuntu 10.04.1. I'm hosting mail for several domains and using the dovecot local delivery agent. Everything has been working great. However, today I set up a sieve script to send out-of-office replies (vacation) for one of our users. I tested it and got the response just fine. However, when looking at the "From" header of the auto-reply, I noticed that the domain name was wrong. My postfix master.cf line for doing local delivery is: dovecot unix - n n - - pipe flags=DRhu user=mail:mail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} My LDA configuration is: protocol lda { postmaster_address = postmaster(a)our-primary-domain.com hostname = our-primary-domain.com mail_plugins = sieve quota_full_tempfail = yes deliver_log_format = msgid=%m: %$ rejection_reason = Your message to <%t> was automatically rejected:%n%r } So, our main "administrative" domain is: my-primary-domain.com, the mail server being mail.my-primary-domain.com. I sent an email to a user: janedoe(a)my-other-domain.com and the LDA with Sieve successfully sent me a reply. However, the "From" was: janedoe@mail instead of janedoe@my-other-domain. According to: http://wiki.dovecot.org/LDA/Sieve#Vacation_auto-reply > Vacation uses envelope sender and envelope recipient ... taken from: > ... > V 1.1+ > ... > Envelope recipient: -a parameter to deliver if given, otherwise -d parameter to deliver. If neither is given (delivering to system users), the $USER environment is used. Just for kicks I tried changing my master.cf to use -a instead of -d but then all mail delivers to user "mail" completely breaking all mail delivery. Anyhow, vacation auto-responders are fundamental to operations here and we manage mail for several separate companies. We need the "From" address to reflect the domain of the actual company. I'm stumped as to why sieve isn't getting/using the envelope sender's domain. I'm hoping someone here can point out (a hopefully obvious) mistake. I've attached my four pertinent config files as etc.tgz only slightly scrubbed. Any help is greatly appreciated. -- Kendall Gifford zettabyte(a)gmail.com

3 2

[Dovecot] Trouble creating shared virtual folders
by Daniela Silva 24 Sep '10

24 Sep '10

Hi all, I've tried to contact Timo Sirainen by dovecot irc channel but since I couldn't I'm trying the mailinglist. I'm trying to create shared virtual folders, users should not be able either to create or delete a virtual folder. What is the best way to do this? I've tried to do this with virtual mailboxes, but I had problems with permissions, I removed write permissions from folder "virtual_folders" but if I do that dovecot creates "virtual_folders_indexes" without write permissions too, which in this case are needed. I've tried to solve this using ACL but as far as I understood I need an ACL file per folder, which in my case is undoable. Thanks, -- Daniela Silva protocols: imap pop3 managesieve listen: 10.0.32.1, 10.0.4.14 ssl: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_executable(managesieve): /usr/libexec/dovecot/managesieve-login login_processes_count: 64 login_max_processes_count: 1024 max_mail_processes: 1000 verbose_proctitle: yes mail_uid: 500 mail_gid: 100 mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_executable(managesieve): /usr/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota zlib trash virtual acl mail_plugins(imap): quota imap_quota zlib trash virtual acl mail_plugins(pop3): quota zlib mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 mail_plugin_dir(managesieve): /usr/lib64/dovecot/managesieve mail_log_max_lines_per_sec: 0 namespace: type: private separator: / inbox: yes hidden: yes list: no subscriptions: yes namespace: type: private separator: / prefix: virtual_folders/ location: virtual:~/maildir/virtual_folders:INDEX=~/maildir/virtual_folders_indexes list: yes subscriptions: yes lda: postmaster_address: postmaster(a)portugalmail.net mail_plugins: quota sieve acl auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: users plugin: quota: maildir quota_rule: *:storage=102400 quota_rule2: Lixo:storage=71680 acl: vfile:/etc/dovecot/acls trash: /etc/dovecot/dovecot-trash.conf sieve_global_dir: /mnt/sieve/%d/maildir/sieve

2 1

[Dovecot] Unsubscribing from public folders
by aditsu 24 Sep '10

24 Sep '10

Hi, I'm having problems unsubscribing from public folders - nothing seems to happen when I do that (from Thunderbird, Squirrelmail or telnet). I'm using Dovecot 1.2.11. I remember that this worked when I was using version 1.1.7. Here is an extract from an imap session: 3 unsubscribe "Public-NIB/archive/older" 3 OK Unsubscribe completed. 6 lsub "" "Public-NIB/*" * LSUB () "/" "Public-NIB/archive" * LSUB () "/" "Public-NIB/archive/2008b" * LSUB () "/" "Public-NIB/archive/2009a" * LSUB () "/" "Public-NIB/archive/2009b" * LSUB () "/" "Public-NIB/archive/older" * LSUB () "/" "Public-NIB/archive/2010a" 6 OK Lsub completed. And my relevant config: namespace private { separator = / prefix = #location defaults to mail_location. inbox = yes } namespace public { separator = / prefix = Public-NIB/ location = maildir:/(some path) subscriptions = no # v1.1+ } In the meantime I checked and found a "subscriptions" file in my maildir, then went and edited it by hand (and removed the folder I wanted). That seemed to work, and afterwards I can subscribe/unsubscribe to that particular folder, but still not to any other public folders. What could be the problem, or how can I debug this? Thanks Adrian -- View this message in context: http://old.nabble.com/Unsubscribing-from-public-folders-tp29779347p29779347… Sent from the Dovecot mailing list archive at Nabble.com.

2 5

[Dovecot] Possible to split message store location?
by Edward Carraro 24 Sep '10

24 Sep '10

We have a few dovecot servers all pointing to the same mail location (an NFS mount on a NAS drive). This could lead to a possible bottleneck eventually and we were wondering if it's possible to have dovecot direct x number of users to one message store location while others get their mail on a different mount?

6 9

[Dovecot] Dovecot pop3 segfault problems
by enid vx 24 Sep '10

24 Sep '10

Hi to all, I have a Debian 4.0 x86_64 server and installed Dovecot from the repositories ii dovecot-common 1.0.rc15-2etch5 ii dovecot-imapd 1.0.rc15-2etch5 ii dovecot-pop3d 1.0.rc15-2etch5 Recently I'm getting a lot of these messages pop3[24594]: segfault at 0000000000000004 rip 000000000044333a rsp 00007fffc5d0c1e0 error 4 in syslog and also dmesg. Also the load of the servers keeps increasing (like above 100) and when dovecot is stopped the load decreases. What problem could this be and how can I resolve it? Thanks, Enid

4 11

[Dovecot] dovecot+sieve redirect action signal 11 while user homedir not defined
by Maciej Uhlig 24 Sep '10

24 Sep '10

Hi, while executing simple sieve script: require ["fileinto", "envelope"]; if header :contains "subject" "test" { redirect "user@domain"; } we got: 2010-09-23T09:25:23+02:00 st1/192.168.10.201 dovecot: [ID 583609 mail.error] master: Error: service(lmtp): child 15524 killed with signal 11 (core not dumped) in case user home directory is (erroneously) undefined. This happens with 'redirect' action only ('keep', 'fileinto' work ok). Moreover, since there is no homedir, there is no core file too :-) After user homedir was defined, the error disappeared. This is under Solaris 10 with dovecot 2.0.3 and pigeonhole 0.2.0. Thank you, Maciej Uhlig

2 3

[Dovecot] Setting hierarchy separator
by ksrini9＠yahoo.com 24 Sep '10

24 Sep '10

I am trying to convert my maildir mail store to dbox using dsync (using "dsync -u username convert dbox:/mailstore2/dbox"). I get the following error message: dsync(root): Fatal: Mail locations must use the same virtual mailbox hierarchy separator (specify separator for the default namespace). My problem is that I do not know how to set separator in 10-mail.conf. I would appreciate any pointers. Here is the output from dovecot -n: # 2.0.3: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.el5 x86_64 Red Hat Enterprise Linux Server release 5.5 (Tikanga) ext3 auth_cache_size = 20480 auth_cache_ttl = 7200 s base_dir = /var/run/dovecot/ disable_plaintext_auth = no listen = * log_path = /var/log/dovecot.log mail_location = maildir:/mailstore/dovecot/maildir/%u maildir_very_dirty_syncs = yes passdb { args = /etc/passwd.dovecot driver = passwd-file } postmaster_address = postmaster@localhost protocols = imap service imap-login { inet_listener imap { port = 143 } service_count = 0 vsz_limit = 67108864 } ssl = no userdb { driver = passwd } Thanks, Srini

2 2

[Dovecot] Upgrading from 2.0.1 to 2.0.3
by Jerrale G 24 Sep '10

24 Sep '10

What has changed in 2.0.3 to make dovecot start storing the inbox in a "com" subdirectory of "user@domain"directory in the inbox folder? I am guessing I need to add ":INBOX=/home/mail/%d/%n/mail/" to: mail_location = maildir:/home/mail/%d/%n/mail:CONTROL=/home/mail/control/%d/%n:INDEX=/home/mail/index/%d/%n The inbox was never defined as it automatically put the messages in either "cur" or "new" subdirectories of the "maildir" definition. Because it automatically used subdirectories, it was not a problem for it to use the "maildir" as both the Inbox directory and the directory to hold the other directories created by the user; so, I never defined the inbox. The mysql query is: user_query = SELECT CONCAT('/home/mail/', mailboxes.domain, '/', mailboxes.username, '/') AS home, CONCAT('/home/mail/', mailboxes.domain, '/', mailboxes.username, '/sieve/', mailboxes.username, '.sieve') as sieve, CONCAT('/home/mail/', mailboxes.domain, '/', mailboxes.username, '/sieve/') as sieve_dir, CONCAT('/home/mail/', mailboxes.domain, '/', mailboxes.username, '/mail/') AS maildir, 600 AS uid, 600 AS gid, CONCAT('*:storage=', ROUND(mailboxes.quota/1200), 'M') AS quota_rule, 'Trash:ignore' AS quota_rule2 FROM mail.mailboxes WHERE username = '%n' AND domain = '%d' AND active = '1' iterate_query = SELECT concat(mailboxes.username, '@', mailboxes.domain) AS user, CONCAT('/home/mail/', mailboxes.domain, '/', mailboxes.username, '/') AS home, CONCAT('/home/mail/', mailboxes.domain, '/', mailboxes.username, '/mail/') AS maildir FROM mail.mailboxes I was looking at another thread and saw where the names of dovecot fields, such as "userdb_maildir", have been prefixed with userdb to equal "userdb_maildir". Please Let me know of any changes, or additions, I need to do above. As said, I'm guessing I need to just add ":INBOX=/home/maill/%d/%n/mail/" to dovecot.conf or add ", CONCAT('/home/mail', mailboxes.domain, '/', mailboxex.username, '/mail/') AS INBOX" to the mysql query. Am I correct? Thanks Jerrale G. SC Senior Admin

2 1

[Dovecot] get MAIL_FETCH_UIDL_FILE_NAME after save a email
by Alex Baule 24 Sep '10

24 Sep '10

Hi Timo... I Try to get the name from the saved email, you said to me, to get this with the get_special, ok... thats work. I get the name with this: mail_get_special(t->save_ctx->dest_mail, MAIL_FETCH_UIDL_FILE_NAME, &fname); By i got some mistake... when i save a email that exist in the same directory, the email is rewrited with another name, but the get_special give me the old one name. Have another way to get the name from a saved email, after save it ? after this: ret = zbox->super.transaction_commit(t, changes_r); To get the correct name from a saved email.

2 2

[Dovecot] virtual_transport lmtp Error: User doesn't have home dir set
by Bernd Schmelter 24 Sep '10

24 Sep '10

Hallo, Errormessage in log, but it delivers correct Sep 23 21:30:40 serv postfix/pickup[15974]: 8807F4E127: uid=0 from=<root> Sep 23 21:30:40 serv postfix/cleanup[16049]: 8807F4E127: message-id=<20100923193040.8807F4E127(a)serv.chefe.dyndns.org> Sep 23 21:30:40 serv postfix/qmgr[15975]: 8807F4E127: from=<root(a)chefe.dyndns.org>, size=451, nrcpt=1 (queue active) Sep 23 21:30:43 serv postfix/smtpd[16056]: connect from localhost[127.0.0.1] Sep 23 21:30:43 serv postfix/smtpd[16056]: 829E54E125: client=localhost[127.0.0.1] Sep 23 21:30:43 serv postfix/cleanup[16049]: 829E54E125: message-id=<20100923193040.8807F4E127(a)serv.chefe.dyndns.org> Sep 23 21:30:43 serv postfix/qmgr[15975]: 829E54E125: from=<root(a)chefe.dyndns.org>, size=917, nrcpt=1 (queue active) Sep 23 21:30:43 serv postfix/smtpd[16056]: disconnect from localhost[127.0.0.1] Sep 23 21:30:43 serv amavis[14848]: (14848-12) Passed CLEAN, <root(a)chefe.dyndns.org> -> <benn(a)chefe.dyndns.org>, Message-ID: <20100923193040.8807F4E127(a)serv.chefe.dyndns.org>, mail_id: 8zA2HZgsRuZy, Hits: -1.901, size: 451, queued_as: 829E54E125, 2984 ms Sep 23 21:30:43 serv dovecot: lmtp(16061): Connect from local Sep 23 21:30:43 serv postfix/lmtp[16052]: 8807F4E127: to=<benn(a)chefe.dyndns.org>, orig_to=<benn>, relay=127.0.0.1[127.0.0.1]:10024, delay=3.1, delays=0.08/0.02/0.01/3, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=14848-12, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 829E54E125) Sep 23 21:30:43 serv postfix/qmgr[15975]: 8807F4E127: removed Sep 23 21:30:43 serv dovecot: auth: mysql: Connected to 127.0.0.1 (mailuser) Sep 23 21:30:43 serv dovecot: lmtp(16061, benn(a)chefe.dyndns.org) Error: User benn(a)chefe.dyndns.org doesn't have home dir set, disabling duplicate database ------------------------------------------------------------- Sep 23 21:30:43 serv dovecot: dict: mysql: Connected to 127.0.0.1 (mailuser) Sep 23 21:30:43 serv dovecot: lmtp(16061, benn(a)chefe.dyndns.org) FEi8JOOqm0y9PgAA2Ba9sg: sieve: msgid=<20100923193040.8807F4E127(a)serv.chefe.dyndns.org>: stored mail into mailbox 'INBOX' Sep 23 21:30:43 serv postfix/lmtp[16060]: 829E54E125: to=<benn(a)chefe.dyndns.org>, relay=serv.chefe.dyndns.org[private/dovecot-lmtp], delay=0.24, delays=0.02/0.04/0.03/0.15, dsn=2.0.0, status=sent (250 2.0.0 <benn(a)chefe.dyndns.org> FEi8JOOqm0y9PgAA2Ba9sg Saved) Sep 23 21:30:43 serv dovecot: lmtp(16061): Disconnect from local: Client quit Sep 23 21:30:43 serv postfix/qmgr[15975]: 829E54E125: removed ----------------- doveconf -n: # 2.0.3 (4a753371ae73): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-486 i686 Debian squeeze/sid ext3 auth_mechanisms = plain login cram-md5 dict { expire = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } listen = * mail_location = maildir:/var/vmail/%d/%n mail_plugins = $mail_plugins quota expire managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date spamtest spamtestplus virustest passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { autocreate = Trash autocreate2 = Sent autocreate3 = Drafts autocreate4 = Spam autosubscribe = Trash autosubscribe2 = Sent autosubscribe3 = Drafts autosubscribe4 = Spam expire = Trash expire2 = Sent expire_dict = proxy::expire quota = dict:user::proxy::quota quota_rule = *:storage=500M:messages=2048 quota_rule2 = Trash:storage=+50M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = /var/vmail/%d/%n/dovecot.sieve sieve_storage = /var/vmail/%d/%n/sieve } protocols = imap lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0660 user = vmail } user = dovecot } service dict { unix_listener dict { mode = 0600 user = vmail } user = dovecot } service imap-login { executable = /usr/lib/dovecot/imap-login } service imap { executable = /usr/lib/dovecot/imap } service lmtp { inet_listener lmtp { port = 24 } unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } user = vmail } service managesieve-login { executable = /usr/lib/dovecot/managesieve-login inet_listener sieve { port = 4190 } } service managesieve { executable = /usr/lib/dovecot/managesieve } service quota-warning { executable = script /usr/bin/quota-warning.sh unix_listener quota-warning { mode = 0600 user = vmail } user = vmail } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocol lmtp { mail_plugins = sieve quota } protocol imap { mail_plugins = $mail_plugins imap_quota autocreate } --------------- Errormessage occured after upgrade: Upgrade: dovecot-imapd:i386 (2.0.3-0~auto+11, 2.0.3-0~auto+13) What is dublicate database / It`s possible to suppress duplicate mails? Benn

2 2

[Dovecot] Does Director only work with dovecot proxy?
by Edward Carraro 23 Sep '10

23 Sep '10

I was reading "conf.d/10-director.conf" and it mentions Dovecot proxy. I've been using perdition in the past for my pop/imap proxying needs and wasn't sure if Director could also use perdition or if it only works with Dovecots proxying. Thanks!

2 1

[Dovecot] Creating 'trash' folder
by Jerry 23 Sep '10

23 Sep '10

This might well be OT; however, I thought I would ask anyway. Please keep in mind that the IMAP server is Dovecot. I have a friend who uses Becky Internet Mail <http://www.rimarts.co.jp/becky.htm> on a Windows system. There us an options under the configuration menu in Becky to create the trash folder on the server. It suggest ".trash" for the name. He is aware that I use Dovecot and wanted to know if that would actually work. He claims to have activated that option in Becky; however, the trash folder was never actually created, or at least he was unable to locate it. I was just wondering if anyone had any experience with this sort of thing. I could gather more information, but I doubt that this really has anything to do with Dovecot anyway. -- Jerry ✌ Dovecot.user(a)seibercom.net Disclaimer: off-list followups get on-list replies or get ignored. Please do not ignore the Reply-To header. __________________________________________________________________ Happiness, n.: An agreeable sensation arising from contemplating the misery of another. Ambrose Bierce, "The Devil's Dictionary"

3 5

[Dovecot] Plain-Text & CRAM-MD5
by Leander S. 23 Sep '10

23 Sep '10

Hi there, I'm currently running my auth against CRAM-MD5 only. But I face problems with customers who apparently have smart phones which ONLY support plain-text authentification ;( Bad - I know, but what should I do ... ;/ So my question now is: Is it possible to run CRAM-MD5 as well as Plain-Text auth together with Postfix if Postfix is using Dovecot's SASL auth service? Cause that's how my setup currently looks like - except the plain-text auth ... Thanks & Regards

2 1

[Dovecot] recursive locks
by Mike Abbott 23 Sep '10

23 Sep '10

How can a dovecot-2 plugin safely use file-locks or file-dotlocks when the processes into which it plugs handle multiple connections? (Via, e.g., service imap { client_limit = N service_count = 0 }) Dovecot's file-locks and file-dotlocks do not appear to support nesting/recursion. For instance, squat_trie_lock(). Imagine one user is connected to a single imap process twice.

2 1

[Dovecot] Expunged GUID mismatch for UID error
by Xavier Pons 23 Sep '10

23 Sep '10

Hi, we have upgraded from v2.0.1 to v2.0.3 yesterday, trying to solve the "dovecot-uidlist: Duplicate file entry" errors. Now, at the moment, we don't get these errors, but when I try to expunge mails from my trash folder I get a lot of errors: Sep 23 14:24:51 imap1 dovecot: imap(user): Error: Mailbox Trash: Expunged GUID mismatch for UID 20193: 442b5ef0c3d3bf3cf4cb619944dce8e4 vs 0431b9bee05471199fabbc05af3a87a5 (with different GUIDs, and UIDs) and the mails are not expunged from Trash mailbox. Also, I have tried with "doveadm force-resync -u user Trash" and "doveadm expunge -u user mailbox Trash ALL" but not resolve the problem... Thanks Xavier Pons

3 3

Re: [Dovecot] service(imap-login): chiled ... killed with signal 11
by Timo Sirainen 23 Sep '10

23 Sep '10

On Thu, 2010-09-23 at 08:55 +0200, Burckhard Schmidt wrote: > #1 0xfecd750c in free () from /lib/libc.so.1 > No symbol table info available. > #2 0xfefc145c in CRYPTO_free () from /opt/csw/lib/libcrypto.so.0.9.8 > No symbol table info available. > #3 0xff04a13c in sk_free () from /opt/csw/lib/libcrypto.so.0.9.8 > No symbol table info available. > #4 0xff153bf0 in SSL_CTX_free () from /opt/csw/lib/libssl.so.0.9.8 My guess: You have an old and buggy OpenSSL library. I remember someone else also had a similar (same?) problem that went away when upgrading OpenSSL.

2 1

[Dovecot] Auth error
by Thiago Henrique 23 Sep '10

23 Sep '10

Hello, I'm testing Dovecot 2.0. I plan to use Dovecot 2.0 with thousands of domains per server. My user base is under virtual MySQL. I my tests, the authentication fails intermittently, and I could not find what's wrong. Can anyone help me? ################################################################################ Sep 22 16:31:16 box5 dovecot: last message repeated 9 times Sep 22 16:31:16 box5 dovecot: auth: Debug: auth client connected (pid=9249) Sep 22 16:31:20 box5 dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011lip=1.2.3.4#011rip=1.2.3.4#011lport=143#011rport=45348#011resp=AHRoaWFnbz1hZG1pbmxpbnV4LmNvbS5icgAxcWF6MndzeA== Sep 22 16:31:20 box5 dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Sep 22 16:31:20 box5 dovecot: auth: mysql: Connected to mysqlserver.com (database_name) Sep 22 16:31:20 box5 dovecot: auth: Debug: sql(account=domain.com,1.2.3.4): query: SELECT AccountName AS userdb_username, Password AS password, MailLocation AS userdb_mail, concat('*:bytes=', ItQuota, 'M') AS userdb_quota_rule FROM Account WHERE AccountName = 'account=domain.com' Sep 22 16:31:20 box5 dovecot: auth: Debug: client out: OK#0111#011user=account=domain.com Sep 22 16:31:20 box5 dovecot: auth: Debug: master in: REQUEST#0111#0119249#0111#011ba525e3c7ea765255e814a27c5ef8294 Sep 22 16:31:20 box5 dovecot: auth: Error: Master requested auth for nonexistent client 9249 Sep 22 16:31:20 box5 dovecot: imap-login: Internal login failure (auth failed, 1 attempts): user=<account=domain.com>, method=PLAIN, rip=1.2.3.4, lip=1.2.3.4, mpid=9225 ################################################################################ Thank you in advance. Best Regards -- []'s Thiago Henrique Network Administration Digirati Networks K8 Networks

2 1

[Dovecot] Sieve force SSL
by Lukas Haase 23 Sep '10

23 Sep '10

Hi, I have activated only imaps and managesieve. As sieve is running on a different port/protocol: Can I make sure that sieve can ONLY be used with SSL/TLS? As the credentials are transmitted I only offer services with SSL (IMAPS, SMTP over SSL, ...). For sieve I am not sure about this. If there is the possibility that user's credentials are transmitted in plain text I would block the port from the firewall, else I would offer my users the feature to change their rules with their own client (e.g. Thunderbird sieve). Regards, Luke

2 3

[Dovecot] Dovecot LDA, virtual users, multiple uids: No luck
by Toni Mueller 23 Sep '10

23 Sep '10

Hi, I'm trying to get Dovecot's deliver to create and use mailboxen with one uid per user. Reading the wiki, I decided to go with the sudo attempt, but I'm stuck because deliver fails to create the intermediate directories. The auth.log has this on the matter: sudo: dovelda : TTY=unknown ; PWD=/var/spool/postfix ; USER=root ; COMMAND=/usr/lib/dovecot/deliver -f toni(a)bogus.oeko.net -d dick(a)example.com Using strace on 'deliver', I get this: # su - dovelda $ echo "blubber" |sudo strace /usr/lib/dovecot/deliver -f toni(a)bogus.oeko.net -d dick(a)example.com ... geteuid() = 0 getgid() = 0 setgid(2000) = 0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ setgroups(1, [2000]) = 0 setuid(2100) = 0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ setuid(0) = -1 EPERM (Operation not permitted) getgid() = 2000 getegid() = 2000 setgid(0) = -1 EPERM (Operation not permitted) close(6) = 0 geteuid() = 2100 geteuid() = 2100 and subsequently, creating the directories fails. The values in the underlined lines above, 2100 and 2000, are from the database entry of the user I want to deliver the email to. My /etc/sudoers has this for dovelda: dovelda ALL=NOPASSWD:/usr/lib/dovecot/deliver dovelda ALL=NOPASSWD:/usr/bin/strace I'm using a Debian/Lenny system with amd64 and this package for Dovecot: # dpkg -l 'dovecot*' Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii dovecot-common 1:1.2.13-1~bpo secure mail server that supports mbox and ma ii dovecot-imapd 1:1.2.13-1~bpo secure IMAP server that supports mbox and ma Kind regards, --Toni++

2 2

[Dovecot] Sieve error on Quota full (Dovecot 2.0.3)
by Cassidy Larson 23 Sep '10

23 Sep '10

Just switched my storage boxes to 2.0.3 with Pigeonhole. Noticing for those that have quota fulls, my syslog is getting full of errors from sieve: dovecot: lda(user(a)host.com): Error: sieve: script /data/mail/host.com/user(a)host.com//.dovecot.sieve failed with unsuccessful implicit keep (user logfile /data/mail/host.com/user(a)host.com//.dovecot.sieve.log may reveal additional details) Checking the .dovecot.sieve.log I see: sieve: info: started log at Sep 22 00:38:11. error: msgid=<dovecot-1285137490-378260-0(a)storagebox.host.com>: failed to store into mailbox 'INBOX': Quota exceeded ( mailbox for user is full). Any way to suppress these quota full messages from filling up my logs and .dovecot.sieve.log ? I do like the .dovecot.sieve.log for debugging, but regular quota warnings seems excessive. Thanks, Cassidy

4 5

[Dovecot] Vpopmail support broken
by Matt Brookings 23 Sep '10

23 Sep '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 My apologies if I'm posting for information which has already been supplied to the list. I searched and all I found was people talking about the change in 2.0.3, but no details on the commit other than "I was tired of people telling me it crashes". We have not received any reports for the 5.4 or 5.5 branch of vpopmail causing crashes in Dovecot. That being said, if there is a problem, we would like to provide a fix. Again, if details on the specifics of the problem have been supplied, I apologize. Can anyone please provide me some reproduction details for Dovecot 2.0.3's vpopmail plugin compiled against vpopmail 5.4.30+ or 5.5.0? Removing the "vpopmail support broken" line from the configure script, compiling and running seemed to work short-term. I was able to authenticate against the vpopmail plugin. I tested with vpopmail 5.4.32 and 5.5.0 using the cdb authentication module. Thanks! - -- /* Matt Brookings <matt(a)inter7.com> GnuPG Key FAE0672C Software developer Systems technician Inter7 Internet Technologies, Inc. (815)776-9465 */ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkyaI6MACgkQIwet2/rgZyz8ugCeOnyz5DfV9FwrHfEmIroeznPv kZYAn0TnbEULiuZqJANoZsfhOahhsA0H =LHP4 -----END PGP SIGNATURE-----

4 12

[Dovecot] xz compression support
by Attila Nagy 23 Sep '10

23 Sep '10

Hello, Just wondering: Dovecot has gzip/bzip2 compression/decompression support. According to this: http://stephane.lesimple.fr/wiki/blog/lzop_vs_compress_vs_gzip_vs_bzip2_vs_… gzip and bzip2 aren't really useful together. While gzip can offer speed and a reasonable amount of compression ratio, bzip2 is slow, especially on decompression, which Dovecot does more frequently than compression (1 vs many). So: is it planned to include xz (liblzma) support? It would be useful especially for compressing old mails in the background (due to the resource intensity of the compression phase). Thanks,

2 1

[Dovecot] Panic: file mailbox-list-fs.c
by Burckhard Schmidt 22 Sep '10

22 Sep '10

Hi, I have dovecot 2.0.3. Mailboxes have been converted with dsync from mbox to maildir last week. There it was still version 2.0.2. A user "produces" now this error: imap(userx): Panic: file mailbox-list-fs.c: line 150 (fs_list_get_path): assertion failed: (mailbox_list_is_valid_pattern(_list, name)) Error: Raw backtrace: follows. And all other imap processes are closing down. dovecot starts again. master: Info: Dovecot v2.0.3 starting up Additional mail_location = maildir:~/maildir:INDEX=/addons/index/%u:CONTROL=~/control:LAYOUT=fs namespace { inbox = yes list = yes location = prefix = separator = / subscriptions = yes type = private } Are there charachters which are not allowed or is there a reached a maximal length? regards -- Mit freundlichen Gruessen --- Burckhard Schmidt

2 3

[Dovecot] "Documentation" link from http://www.dovecot.org/
by William Blunn 22 Sep '10

22 Sep '10

On the Dovecot home page http://www.dovecot.org/ we have a link "Documentation" which links to the Dovecot 1.x wiki ( http://wiki.dovecot.org/ ). There is a question mark in my mind as to whether that is a good idea considering as how the current stable version of Dovecot appears to be 2.0.x. In the Dovecot 1.x wiki, there is a pink stripe across the top of the page which says that the documentation is for Dovecot 1.x. It looks as though the intention was to make that prominent so as to guide visitors to the right documentation, and I think to a certain extent it may work. But I am wondering if perhaps the stripe could be too easily missed. People might start browsing around in the Dovecot 1.x wiki without it even occurring to them that there was a whole another wiki for 2.x. I have an idea: Perhaps the "Documentation" link on the home page could be re-worked to something like Documentation v2.x v1.x where "v2.x" and "v1.x" are links to the two wikis. This would make it obvious that there was different documentation available for v2.x and v1.x, and encourage visitors to choose the appropriate set. Bill

3 8

[Dovecot] service(imap-login): chiled ... killed with signal 11
by Burckhard Schmidt 22 Sep '10

22 Sep '10

Hi, dovecot 2.0.3 After closing the imap(s) connection dovecot crashes: imap-login: Info: Aborted login (no auth attempts): rip=... lip=... mpid=0 master: Error: service(imap-login): child 18636 killed with signal 11 (core not dumped - set service imap-login { drop_priv_before_exec=yes }) master: Warning: Killed with signal 15 (by pid=18643 uid=0 code=kill) It also happens if I only telnet to the imap(s) port and give the only command "1 logout". How can I get a dump for backtracing? With drop_priv_before_exec=yes I get a config error: doveconf: Fatal: Error in configuration file /usr/dovecot/etc/dovecot/dovecot.conf: service(imap-login): drop_priv_before_exec=yes can't be used with chroot As user I can login and work normaly but I have to reconnect after a differnet connection will be closed causing a dovecot crash. Additional information: Solaris 10, packages openssl, openldap by opencsw I had seen a similar error during login process already with an rc-version. Because opencsw offers only an older version of openssl I installed current versions of openssl and openldap, So it works again. Now both packaged are up to date at opencsw. So I would like using these packages again when I install dovecot. Any hints? -- Mit freundlichen Gruessen --- Burckhard Schmidt

2 1

[Dovecot] Sieve autoreply woes on test setup
by Mohit Chawla 22 Sep '10

22 Sep '10

Hi, I have been testing sieve in my setup with qmail-ldap and deliver on a LAN with an artificial domain name. Everything seems to be working as expected, except in cases when autoreplies (vacation, reject messages) need to be tested. The domain name is vmint, and dawnone is the hostname on which mail server is setup, so a users have address like cot@vmint, cute@vmint and dove@vmint * LDA Log* *cot is the user with the sieve vacation filter enabled* 2010-09-22 16:47:55 deliver(cot): Info: Loading modules from directory: /usr/lib/dovecot/modules/lda 2010-09-22 16:47:55 deliver(cot): Info: Module loaded: /usr/lib/dovecot/modules/lda/lib10_quota_plugin.so 2010-09-22 16:47:55 deliver(cot): Info: Module loaded: /usr/lib/dovecot/modules/lda/lib90_sieve_plugin.so 2010-09-22 16:47:55 deliver(cot): Info: auth input: uid=1011 2010-09-22 16:47:55 deliver(cot): Info: auth input: gid=1011 2010-09-22 16:47:55 deliver(cot): Info: auth input: home=/home/cot 2010-09-22 16:47:55 deliver(cot): Info: auth input: quota_rule=*:bytes=1000000 2010-09-22 16:47:55 deliver(cot): Info: Quota root: name= backend=maildir args= 2010-09-22 16:47:55 deliver(cot): Info: Quota rule: root= mailbox=* bytes=1000000 messages=0 2010-09-22 16:47:55 deliver(cot): Info: maildir: data=/home/cot/Maildir 2010-09-22 16:47:55 deliver(cot): Info: maildir++: root=/home/cot/Maildir, index=, control=, inbox=/home/cot/Maildir 2010-09-22 16:47:55 deliver(cot): Info: sieve: using sieve path for user's script: /home/cot/.dovecot.sieve 2010-09-22 16:47:55 deliver(cot): Info: sieve: opening script /home/cot/.dovecot.sieve 2010-09-22 16:47:55 deliver(cot): Info: sieve: executing compiled script /home/cot/.dovecot.sieve 2010-09-22 16:47:55 deliver(cot): Info: sieve: msgid=< e93c61e349a52559d3060b6530f6dd69.squirrel(a)192.168.1.137>: sent vacation response to <cute@vmint> 2010-09-22 16:47:55 deliver(cot): Info: Namespace : Using permissions from /home/cot/Maildir: mode=0700 gid=-1 2010-09-22 16:47:55 deliver(cot): Info: sieve: msgid=< e93c61e349a52559d3060b6530f6dd69.squirrel(a)192.168.1.137>: stored mail into mailbox 'INBOX' *failure notice message/bounce sent to the postmaster* Return-Path: <> Received: (qmail 5346 invoked for bounce); 22 Sep 2010 11:17:55 -0000 Date: 22 Sep 2010 11:17:55 -0000 From: MAILER-DAEMON@vmint To: "<>"@dawnone.vmint Subject: failure notice Hi. This is the qmail-send program at vmint. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <cute(a)vmint.vmint <http://192.168.1.137/squirrelmail/src/compose.php?send_to=cute%40vmint.vmint>>: Sorry, I couldn't find any host named vmint.vmint. (#5.1.2) --- Below this line is a copy of the message. Return-Path: <"<>"@dawnone.vmint> Received: (qmail 5344 invoked by uid 1011); 22 Sep 2010 11:17:55 -0000 X-Sieve: Dovecot Sieve 0.1.17 Message-ID: <dovecot-sieve-1285154275-554846-0@dawnone> Date: Wed, 22 Sep 2010 16:47:55 +0530 From: <cot(a)vmint.vmint <http://192.168.1.137/squirrelmail/src/compose.php?send_to=cot%40vmint.vmint>> To: <cute(a)vmint.vmint <http://192.168.1.137/squirrelmail/src/compose.php?send_to=cute%40vmint.vmint>> Subject: Not here In-Reply-To: <e93c61e349a52559d3060b6530f6dd69.squirrel(a)192.168.1.137 <http://192.168.1.137/squirrelmail/src/compose.php?send_to=e93c61e349a52559d…>> References: <e93c61e349a52559d3060b6530f6dd69.squirrel(a)192.168.1.137 <http://192.168.1.137/squirrelmail/src/compose.php?send_to=e93c61e349a52559d…>> Auto-Submitted: auto-replied (vacation) Precedence: bulk MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit This is an automated reply; I am away and will not be able to reply to you immediately.I will get back to you as soon as I return. *deliver is being called like this*: deliver -f $SENDER -d $USER where SENDER and USER are provided by qmail-ldap. So, am not sure what component in the chain is appending a .vmint to the existing domain name. Any input appreciated, thanks.

1 2

[Dovecot] Support for spaces in plaintext passwords?
by Simon 22 Sep '10

22 Sep '10

Hi! I have problems with my cellphone. It does not seem to quote the strings to the login command. I can logon using ie SquirrelMail but if i try to login using AndroidMail it just says "autentication failed". If i try maualy i get similar results. Changing password for test to "password-" a login test password- a OK Logged in. Changing password for test to "password " * OK Dovecot ready. a login test password #here i type "password ", but without "" a NO Authentication failed. Uppon examining squirrelmails comunication it sends login "test" "password " I will of cause file a bugreport that Android Mail should use quoted strings when using 'login' autentication as per rfc2060 (which seems to allow it but not demand it). But i wonder if it is possible to work around this issue in Dovecot somehow?

3 4

[Dovecot] Dovecot needs to be built with SSL support?
by ksrini9＠yahoo.com 22 Sep '10

22 Sep '10

I intend to use Dovecot without SSL. Hence, I built it without SSL support. When I am trying start Dovecot, I am getting the following error message. I have set ssl=no in 10-ssl.conf. Can anyone please let me know if it is possible to build and run Dovecot without SSL support? If it is, how can I overcome the following error message? Thanks a lot. Srini Sep 21 11:18:11 master: Info: Dovecot v2.0.3 starting up (core dumps disabled) Sep 21 11:18:11 ssl-params: Fatal: Dovecot built without SSL support Sep 21 11:18:11 master: Error: service(ssl-params): command startup failed, throttling

3 2

[Dovecot] Quota value *not* getting over written by ldap attr value, help ?
by Mohit Chawla 22 Sep '10

22 Sep '10

Hi, I am having trouble with the quota plugin with deliver. In the auth logs, I see that dovecot is able to get the attribute value just fine: *** Sep 21 17:49:30 dawnone dovecot: auth(default): ldap(cot,127.0.0.1): result: uid(user)=cot uidNumber(userdb_uid)=1011 gidNumber(userdb_gid)=1011 homeDirectory(userdb_home)=/home/cot mailQuotaSize(userdb_quota_rule=*:bytes=%$)=*:bytes=1000000 *** But the value defined in dovecot.conf does *not* get over written with the above value: *** 2010-09-21 17:49:37 deliver(cot): Info: Loading modules from directory: /usr/lib/dovecot/modules/lda 2010-09-21 17:49:37 deliver(cot): Info: Module loaded: /usr/lib/dovecot/modules/lda/lib10_quota_plugin.so 2010-09-21 17:49:37 deliver(cot): Info: Quota root: name=User quota backend=maildir args= 2010-09-21 17:49:37 deliver(cot): Info: Quota rule: root=User quota mailbox=* bytes=2500 messages=0 2010-09-21 17:49:37 deliver(cot): Info: maildir: data=/home/cot/Maildir 2010-09-21 17:49:37 deliver(cot): Info: maildir++: root=/home/cot/Maildir, index=, control=, inbox=/home/cot/Maildir 2010-09-21 17:49:37 deliver(cot): Info: Namespace : Using permissions from /home/cot/Maildir: mode=0700 gid=-1 2010-09-21 17:49:37 deliver(cot): Info: msgid=<2092295c098690fc157fca938d28b879.squirrel@dawnone>: save failed to INBOX: Quota exceeded (mailbox for user is full) 2010-09-21 17:49:37 deliver(cot): Info: msgid=<2092295c098690fc157fca938d28b879.squirrel@dawnone>: rejected: Quota exceeded (mailbox for user is full) 2010-09-21 17:49:37 deliver(cot): Info: msgid=<2092295c098690fc157fca938d28b879.squirrel@dawnone>: Return-Path missing, rejection reason: Quota exceeded (mailbox for user is full) *** My configuration files are as follows: **dovecot.conf** root@dawnone:~# dovecot -n # 1.2.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-3-686 i686 Debian squeeze/sid log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail mail_location: maildir:~/Maildir mbox_write_locks: fcntl dotlock lda: postmaster_address: dove@vmint mail_plugins: quota deliver_log_format: msgid=%m: %$ sendmail_path: /usr/lib/sendmail log_path: /var/log/ldaone info_log_path: /var/log/ldatwo debug: yes auth default: debug: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: prefetch userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf plugin: quota: maildir:User quota quota_rule: *:bytes=2500 **dovecot-ldap.conf** hosts = dawnone.vmint uris = ldap://dawnone.vmint dn = cn=admin,dc=vmint dnpass = debian auth_bind = yes ldap_version = 3 base = ou=People,dc=vmint scope = subtree user_filter = (&(objectClass=posixAccount)(uid=%u)) pass_attrs = uid=user,userPassword=password,\ homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid,mailQuotaSize=userdb_quota_rule=*:bytes=%$ user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,mailQuotaSize=quota_rule=*:bytes=%$ Any help in this regard, appreciated. Thanks.

2 2