- dovecot - dovecot.org

[Dovecot] REpeated e-mail
by The Doctor 18 Aug '10

18 Aug '10

Using 1.2.11 I am getting some people repeating that they are getting repeated POP3 e-mails. My configuration is # 1.2.11: /usr/dovecot/etc/dovecot.conf # OS: BSD/OS 4.3 i386 base_dir: /var/run/dovecot/ protocols: pop3 pop3s imap imaps ssl_listen: 204.209.81.1 ssl_cipher_list: ALL:!LOW:!SSLv2 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/dovecot/libexec/dovecot/imap-login login_executable(imap): /usr/dovecot/libexec/dovecot/imap-login login_executable(pop3): /usr/dovecot/libexec/dovecot/pop3-login mail_max_userip_connections(default): 10 mail_max_userip_connections(imap): 10 mail_max_userip_connections(pop3): 3 first_valid_uid: 100 mail_location: mbox:~/mail:INBOX=/var/mail/%u dbox_rotate_days: 0 mail_executable(default): /usr/dovecot/libexec/dovecot/imap mail_executable(imap): /usr/dovecot/libexec/dovecot/imap mail_executable(pop3): /usr/dovecot/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /usr/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /usr/dovecot/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_no_flag_updates(default): no pop3_no_flag_updates(imap): no pop3_no_flag_updates(pop3): yes pop3_enable_last(default): no pop3_enable_last(imap): no pop3_enable_last(pop3): yes pop3_save_uidl(default): no pop3_save_uidl(imap): no pop3_save_uidl(pop3): yes pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: executable: /usr/contrib/libexec/dovecot/dovecot-auth passdb: driver: passwd-file args: /etc/master.passwd userdb: driver: passwd userdb: driver: passwd-file args: /etc/passwd -- Member - Liberal International This is doctor(a)nl2k.ab.ca Ici doctor(a)nl2k.ab.ca God, Queen and country! Never Satan President Republic! Beware AntiChrist rising! http://twitter.com/rootnl2k http://www.facebook.com/dyadallee Australia!! Vote to throw the REpublicans to the sharks!

3 2

[Dovecot] Error: Index file too large ? 904 bytes ?
by Dennis Clarke 18 Aug '10

18 Aug '10

My 1.2.13 build is giving me errors based on the same conf file that was working perfectly for 1.2.12 : Aug 18 03:28:27 IMAP(dclarke): Error: Index file too large: /var/mail/dclarke/dovecot.index Aug 18 03:28:27 IMAP(dclarke): Fatal: block_alloc(2147483648): Out of memory Aug 18 03:28:27 dovecot: Error: child 12560 (imap) returned error 83 (Out of memory - see mail_process_size setting) The file in question is 904 bytes in size : bash-4.1# ls -l /export/home/dclarke/mail/.Sent/dovecot.index -rw------- 1 dclarke csw 904 Aug 4 16:05 /export/home/dclarke/mail/.Sent/dovecot.index So this seems insane. SO I made sure the conf file had this in it : mail_process_size = 256 I then restart the daemon and see this : Aug 18 03:37:02 IMAP(dclarke): Fatal: block_alloc(1073741824): Out of memory Aug 18 03:37:02 dovecot: Error: child 12620 (imap) returned error 83 (Out of memory - see mail_process_size setting) Aug 18 03:37:07 IMAP(dclarke): Error: Index file too large: /export/home/dclarke/mail/.Sent/dovecot.index Aug 18 03:37:07 IMAP(dclarke): Warning: Created dotlock file's timestamp is different than current time (837089755 vs 1282102627): /export/home/dclarke/mail/.Sent/dovecot-uidlist Aug 18 03:37:07 IMAP(dclarke): Fatal: block_alloc(1073741824): Out of memory Aug 18 03:37:07 dovecot: Error: child 12622 (imap) returned error 83 (Out of memory - see mail_process_size setting) Aug 18 03:37:09 IMAP(dclarke): Error: Index file too large: /export/home/dclarke/mail/.Sent/dovecot.index Aug 18 03:37:09 IMAP(dclarke): Warning: Created dotlock file's timestamp is different than current time (527779909 vs 1282102629): /export/home/dclarke/mail/.Sent/dovecot-uidlist Aug 18 03:37:09 IMAP(dclarke): Fatal: block_alloc(1073741824): Out of memory Aug 18 03:37:09 dovecot: Error: child 12624 (imap) returned error 83 (Out of memory - see mail_process_size setting) Sure enough dovecot catches a timestamp issue : bash-4.1# date Wed Aug 18 03:39:24 GMT 2010 bash-4.1# ls -lapE /export/home/dclarke/mail/.Sent/dovecot-uidlist -rw------- 1 dclarke csw 1806 2010-08-16 13:52:16.442510077 +0000 /export/home/dclarke/mail/.Sent/dovecot-uidlist bash-4.1# touch /export/home/dclarke/mail/.Sent/dovecot-uidlist bash-4.1# ls -lapE /export/home/dclarke/mail/.Sent/dovecot-uidlist -rw------- 1 dclarke csw 1806 2010-08-18 03:39:53.263345256 +0000 /export/home/dclarke/mail/.Sent/dovecot-uidlist However the inability to deal with a 904 byte file is a bit of an issue here. Anyone know why mail_process_size = 256 is the wrong thing to look at ? Dennis

2 2

[Dovecot] Extension for sorting mails by Displayname
by Michael Kliewe 18 Aug '10

18 Aug '10

Hi everybody, first of all, thanks Timo for version 2.0. Currently I want to sort mails server-side by displayname of FROM and TO. There is an extension for it, but I think dovecot does not support it at the moment. It is defined in RFC 5957: https://www.tools.ietf.org/html/rfc5957 Is there an dovecot extension for it, how can I get that running? Michael

2 2

Re: [Dovecot] wake up getamail on imap request
by Timo Sirainen 18 Aug '10

18 Aug '10

On Wed, 2010-08-18 at 14:28 +0200, Peter Dungel wrote: > The only issue I'm still facing is, that I don't like to run getmail as a > cronjob that connects to my online mailboxes every minute or so, I'd rather > want it to do so every thirty minutes and whenever I request so by fetching > my mails at my mailclient (e.g. outlook), I've font the Fetchmail Wakeup > plugin, but according to the description this only works for version 1.1.x > and 1.2.x but I'm running 1.0.13. You could create a plugin that triggers getmail every time IMAP's STATUS command is sent. Or probably best to do it on mailbox_opened hook (in v2.0).

1 0

Re: [Dovecot] wake up getamail on imap request
by William Blunn 18 Aug '10

18 Aug '10

On 18/08/2010 13:28, Peter Dungel wrote: > i've set up a little mailserver for my homeoffice, and after some > problems everything works fine for me, I've some virtual users which > get their mail delivered via getmail, and I can access my mails from > my windows mailclient. > > The only issue I'm still facing is, that I don't like to run getmail > as a cronjob that connects to my online mailboxes every minute or so, > I'd rather want it to do so every thirty minutes and whenever I > request so by fetching my mails at my mailclient (e.g. outlook), I've > font the Fetchmail Wakeup plugin, but according to the description > this only works for version 1.1.x and 1.2.x but I'm running 1.0.13. > > Anyone has any idea how to solve this or has a workaround? Upgrade to 1.1.x or 1.2.x? I believe that many people consider 1.0.x to be hideously ancient. I believe that many people on this list will be significantly reluctant to help you with anything before 1.2.x. Version 2.0.0 was declared the current release version last Monday (16 Aug 2010), with the previous current release version before that being 1.2.13. I believe that many people on this will not consider "But My Distro Provides Version X!" to be a valid excuse. Find a more up-to-date binary package, upgrade your distro, install from source; there is always a way. Bill

1 0

[Dovecot] wake up getamail on imap request
by Peter Dungel 18 Aug '10

18 Aug '10

Hi, i've set up a little mailserver for my homeoffice, and after some problems everything works fine for me, I've some virtual users which get their mail delivered via getmail, and I can access my mails from my windows mailclient. The only issue I'm still facing is, that I don't like to run getmail as a cronjob that connects to my online mailboxes every minute or so, I'd rather want it to do so every thirty minutes and whenever I request so by fetching my mails at my mailclient (e.g. outlook), I've font the Fetchmail Wakeup plugin, but according to the description this only works for version 1.1.x and 1.2.x but I'm running 1.0.13. Anyone has any idea how to solve this or has a workaround? Thanks Petr

1 0

[Dovecot] Upgrade to 2.0 - Not so smooth
by Marc Perkel 18 Aug '10

18 Aug '10

Starting Dovecot Imap: Fatal: service(pop3-login) User doesn't exist: dovenull Just some real time feedback. I don't know what dovenull user is or why it is necessary.

14 25

[Dovecot] Problem with compile
by Mišel Mešnjak 18 Aug '10

18 Aug '10

Hi! I have a problem compiling v2.0 of dovecot mail server on one old server running RHEL 3. This is error messaage I get (googled for it and have not found anything useful): passdb-vpopmail.o(.text+0x39a): In function `vpopmail_preinit': /root/dovecot-2.0.0/src/auth/passdb-vpopmail.c:185: undefined reference to `vauth_load_module' collect2: ld returned 1 exit status make[3]: *** [auth] Error 1 make[3]: Leaving directory `/root/dovecot-2.0.0/src/auth' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/root/dovecot-2.0.0/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/root/dovecot-2.0.0' make: *** [all] Error 2 Can someone point me in the right direction? Thanks and bye!

3 2

[Dovecot] Delete user data from Dovecot server
by Thiago Henrique 18 Aug '10

18 Aug '10

Hello, I'm testing Dovecot 2.0. I plan to use Dovecot 2.0 with thousands of domains per server. My user base is under virtual MySQL. when I add a user in the database, it is automatically created in the structure of Dovecot at first login. Is there a easy way to delete a user ? Thank you. -- Atenciosamente, Thiago Henrique (21)2233-5950 ramal 27 Infra Estrutura Linux Hostnet Internet - www.hostnet.com.br Digirati Telecomunicações - www.digirati.com.br

3 2

[Dovecot] reverting back to 1.2.12
by Dennis Clarke 18 Aug '10

18 Aug '10

ver 1.2.13 is also tossing these : Aug 18 03:37:49 dovecot: Warning: I/O leak: 805c600 (27) Aug 18 03:37:49 dovecot: Warning: I/O leak: 805c600 (25) Aug 18 03:37:49 dovecot: Warning: I/O leak: 805c600 (23) I have reverted back to 1.2.12 which "just works". I will go back and recompile 1.2.13 and 2.0.0 again. Maybe the addition of postgressql libs linked in or the use of GCC is the issue on Solaris. Not sure but 1.2.12 to 1.2.13 did not go smoothly at all. Dennis

1 0

[Dovecot] pigeonhole
by Xavier Pons 18 Aug '10

18 Aug '10

Hi, I'm trying to compile the last mercurial release of dovecot-pigeonhole 2.0 and get this error: gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -I/usr/kerberos/include -o .libs/sievec sievec.o -Wl,--export-dynamic ../../src/lib-sieve/.libs/libdovecot-sieve.so ../../src/lib-sieve-tool/.libs/libsieve-tool.a ./debug/.libs/libsieve_ext_debug.a /root/dovecot/dovecot-hg/dovecot-2.0/src/lib-storage/.libs/libdovecot-storage.so /root/dovecot/dovecot-hg/dovecot-2.0/src/lib-lda/.libs/libdovecot-lda.so /root/dovecot/dovecot-hg/dovecot-2.0/src/lib-dovecot/.libs/libdovecot.so -ldl -lrt -Wl,--rpath -Wl,/usr/lib/dovecot ../../src/lib-sieve/.libs/libdovecot-sieve.so: undefined reference to `sieve_stringlist_get_length' ../../src/lib-sieve/.libs/libdovecot-sieve.so: undefined reference to `sieve_stringlist_read_all' ../../src/lib-sieve/.libs/libdovecot-sieve.so: undefined reference to `sieve_single_stringlist_create_cstr' collect2: ld returned 1 exit status make[4]: *** [sievec] Error 1 any idea? thanks Xavier

4 6

[Dovecot] 2.0 and vpopmail
by Jason 'XenoPhage' Frisvold 18 Aug '10

18 Aug '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, Does 2.0 require a specific version of vpopmail? I'm getting this on my build attempt : /usr/src/redhat/BUILD/dovecot-2.0.0/src/auth/passdb-vpopmail.c:185: undefined reference to `vauth_load_module' Yes, it's an RPM, that's how I roll. I'm not finding vauth_load_module anywhere on my system.. I'm running vpopmail 5.4.30 which is, I believe the latest stable release.. Thanks, - --------------------------- Jason 'XenoPhage' Frisvold xenophage(a)godshell.com - --------------------------- "Any sufficiently advanced magic is indistinguishable from technology." - - Niven's Inverse of Clarke's Third Law -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.14 (Darwin) iEYEARECAAYFAkxp/6YACgkQ8CjzPZyTUTT0tACgi5WLR2IcGvhmvmIGlmZpeg1P tUQAn2zx6HuIR3QHIGt/aYCP7nRNBvJ7 =yYrj -----END PGP SIGNATURE-----

2 2

[Dovecot] Using dovecot with vpopmail and mysql auth?
by Aaron Greengrass 18 Aug '10

18 Aug '10

Hi, Does anyone happen to know the right strings to do authentication against mysql storing vpopmail data, vs using the vpopmail auth module? I'm trying to get up to both vpopmail 5.5, and dovecot 2.0, and dovecot-auth seems to reliably segfault on the 5.5 vpopmail module. I've tried downgrading vpopmail as well, with less than stellar results. I saw an old article about doing exactly that -- switching from the vpop module, while still using it's DB, but it is both a) old, and b) confusing. Any help you can offer -- or urls in a pinch -- would be appreciated.

1 1

[Dovecot] Very complex Master User Examples using MySQL
by Marc Perkel 17 Aug '10

17 Aug '10

For those who are interested I have posted in the Wiki examples of using master users in very interesting ways. In these example we will create 3 kinds of master users. The first will be users who can read all email for all domains. The next example will be users who can read all email for their domain only. The third example will be users who can read email of domains listed in a separate ownership table. http://wiki2.dovecot.org/Authentication/MasterUsers Go to Advanced SQL Examples at bottom Let me know what you think. In order to actually make this work you'll have to apply this patch Timo just posted: http://hg.dovecot.org/dovecot-2.0/rev/3ba227176cde

1 0

[Dovecot] dovecot 2.0 convert script
by Marc Perkel 17 Aug '10

17 Aug '10

Since my old config had this: protocols = imap imaps pop3 pop3s ssl_cert_file = /usr/share/ssl/certs/imapd.pem ssl_key_file = /usr/share/ssl/certs/imapd.pem then the convert script should have added ssl = yes Just trying to document all the little issues as I find them.

4 5

[Dovecot] Tricky Master User Query - need MySQL help
by Marc Perkel 17 Aug '10

17 Aug '10

OK - I want to do something very tricky with master users and if I get it to work I'm adding it to the wiki for everyone to use. So far I have a MySQL database that servers multiple domains. I can set a flag making someone a domain owner that allows that person to become master of that domain. Here's the query for that. password_query = SELECT user_name, domain_name, password FROM users WHERE user_name = '%n' AND domain_name = '%d' AND owns_domain='1' AND '%d'='%{login_domain}' So - here's where we get tricky. I have another table called "ownership" where I have 2 fields which is a pairing of email addresses (login_id) and domains owned (owned_object). Data might look like this: joe(a)blow.com domain1.com joe(a)blow.com domain2.com Since joe(a)blow.com owns both domain1.com and domain2.com I want him to be able to log in as anyone in those 2 domains as a master user. Examples: tom@domain1.com*joe@blow.com harry@domain2.com*joe@blow.com So the idea is to create a MySQL query so that if the master user matches the domain part of the login user then it returns true and allows the login. What MySQL query will do that?

1 0

[Dovecot] Master Login using MySQL problem - %{login_domain}
by Marc Perkel 17 Aug '10

17 Aug '10

Hi Timo, Been trying to track this problem down further. The problem seems to be related to verifying the master user failing. My passdb looks like this: passdb { driver = sql args = /etc/dovecot/dovecot-domain-owner-sql.conf master = yes pass = yes } dovecot-domain-owner-sql.conf contains: user_query = SELECT user_name, domain_name FROM users WHERE user_name = '%n' AND domain_name = '%d' AND owns_domain='1' password_query = SELECT user_name, domain_name, password FROM users WHERE user_name = '%n' AND domain_name = '%d' AND owns_domain='1' AND '%d'='%{login_domain}' In this example - bill(a)plf.net is an ordinary user. tom(a)plf.net is a domain owner. Tom wants to read bills email. The login is: bill@plf.net*tom@plf.net This results in tom(a)plf.net being classified as an unknown user. Aug 17 08:38:30 auth: Debug: sql(tom(a)plf.net,127.0.0.1): query: SELECT user_name, domain_name, password FROM users WHERE user_name = 'tom' AND domain_name = 'plf.net' AND owns_domain='1' AND 'plf.net'='' Aug 17 08:38:30 auth: Info: sql(tom(a)plf.net,127.0.0.1): unknown user Aug 17 08:38:32 auth: Debug: client out: FAIL 15 user=tom(a)plf.net Aug 17 08:38:32 imap-login: Info: Aborted login (auth failed, 1 attempts): user=<tom(a)plf.net>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=0, secured Note that the query used to determine that tom(a)plf.net is valid is the password_query and not the user_query resulting in unknown user. I think that's where the problem is.

3 7

[Dovecot] Managesieve and Dovecot 2.0: clients incompatible?
by Jerrale G 17 Aug '10

17 Aug '10

I successfully converted my 1.2.x config and am trying to use managesieve. This configuration is really for 1.2.x even though it says for 2.0: http://wiki2.dovecot.org/ManageSieve/Configuration Trying to assign the port number is not by using "listen". Anyway, I just reverted, on the client, to using the default port 2000. The managesieve client now hangs trying to login and eventually times out. Is the new pigeonhole managesieve incompatible with clients that worked with managesieve 0.11.11? There is no output in the log concerning managesieve from pigeonhole. I guess I could put log=/path/to/a/file in the managesieve part and see what happens. In the old dovecot 1.2, we would get a "managesieve-login" in the log when a client even TRIED to login; now, nothing! -- Jerrale G. SC Senior Admin

2 1

Re: [Dovecot] v2.0.0 released
by Dennis Clarke 17 Aug '10

17 Aug '10

Well , configure looked good and the summary seemed fine : Install prefix . : /opt/csw File offsets ... : 64bit I/O polling .... : poll I/O notifys .... : none SSL ............ : yes (OpenSSL) GSSAPI ......... : yes passdbs ........ : static passwd passwd-file shadow pam checkpassword ldap sql : -bsdauth -sia -vpopmail userdbs ........ : static prefetch passwd passwd-file checkpassword ldap sql : -vpopmail -nss SQL drivers .... : pgsql mysql sqlite Everything was going swimmingly and then poof : libtool: compile: /opt/studio/SOS11/SUNWspro/bin/cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -I../../src/lib-charset -I../../src/lib-mail -I/opt/csw/include:/opt/csw/mysql51/include/mysql:/opt/csw/postgresql83/include -I/opt/csw/include -xstrconst -xildoff -xarch=v8 -xnolibmil -Xa -xcode=pic32 -xregs=no%appl -xlibmieee -g -xs -I/opt/csw/include -I/opt/csw/mysql51/include/mysql -I/opt/csw/postgresql83/include -D_TS_ERRNO -DSOLARIS2=8 -D_LARGEFILE64_SOURCE -I/opt/csw/include -c imap-id.c -KPIC -DPIC -o .libs/imap-id.o libtool: compile: /opt/studio/SOS11/SUNWspro/bin/cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -I../../src/lib-charset -I../../src/lib-mail -I/opt/csw/include:/opt/csw/mysql51/include/mysql:/opt/csw/postgresql83/include -I/opt/csw/include -xstrconst -xildoff -xarch=v8 -xnolibmil -Xa -xcode=pic32 -xregs=no%appl -xlibmieee -g -xs -I/opt/csw/include -I/opt/csw/mysql51/include/mysql -I/opt/csw/postgresql83/include -D_TS_ERRNO -DSOLARIS2=8 -D_LARGEFILE64_SOURCE -I/opt/csw/include -c imap-id.c -o imap-id.o >/dev/null 2>&1 source='imap-match.c' object='imap-match.lo' libtool=yes \ DEPDIR=.deps depmode=none /opt/csw/bin/bash ../../depcomp \ /opt/csw/bin/bash ../../libtool --tag=CC --mode=compile /opt/studio/SOS11/SUNWspro/bin/cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -I../../src/lib-charset -I../../src/lib-mail -I/opt/csw/include:/opt/csw/mysql51/include/mysql:/opt/csw/postgresql83/include -I/opt/csw/include -xstrconst -xildoff -xarch=v8 -xnolibmil -Xa -xcode=pic32 -xregs=no%appl -xlibmieee -g -xs -I/opt/csw/include -I/opt/csw/mysql51/include/mysql -I/opt/csw/postgresql83/include -D_TS_ERRNO -DSOLARIS2=8 -D_LARGEFILE64_SOURCE -I/opt/csw/include -c -o imap-match.lo imap-match.c libtool: compile: /opt/studio/SOS11/SUNWspro/bin/cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -I../../src/lib-charset -I../../src/lib-mail -I/opt/csw/include:/opt/csw/mysql51/include/mysql:/opt/csw/postgresql83/include -I/opt/csw/include -xstrconst -xildoff -xarch=v8 -xnolibmil -Xa -xcode=pic32 -xregs=no%appl -xlibmieee -g -xs -I/opt/csw/include -I/opt/csw/mysql51/include/mysql -I/opt/csw/postgresql83/include -D_TS_ERRNO -DSOLARIS2=8 -D_LARGEFILE64_SOURCE -I/opt/csw/include -c imap-match.c -KPIC -DPIC -o .libs/imap-match.o "imap-match.c", line 199: identifier redeclared: imap_match_dup current : function(pointer to struct pool {pointer to const struct pool_vfuncs {..} v, unsigned int alloconly_pool :1, unsigned int datastack_pool :1}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning pointer to struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data} previous: function(pointer to struct pool {pointer to const struct pool_vfuncs {..} v, unsigned int alloconly_pool :1, unsigned int datastack_pool :1}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning pointer to struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data} : "imap-match.h", line 33 "imap-match.c", line 214: identifier redeclared: imap_match_globs_equal current : function(pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning _Bool previous: function(pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning _Bool : "imap-match.h", line 36 cc: acomp failed for imap-match.c gmake[3]: *** [imap-match.lo] Error 1 gmake[3]: Leaving directory `/export/medusa/dclarke/build/dovecot/sparc/dovecot-2.0.0-sparcv8-001/src/lib-imap' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/export/medusa/dclarke/build/dovecot/sparc/dovecot-2.0.0-sparcv8-001/src' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/export/medusa/dclarke/build/dovecot/sparc/dovecot-2.0.0-sparcv8-001' gmake: *** [all] Error 2 [mimas] So that stops me while I figure out what the issue is with imap-match.h and/or imap-match.c in the Solaris world while using Sun Studio 11. -- Dennis Clarke dclarke(a)opensolaris.ca <- Email related to the open source Solaris dclarke(a)blastwave.org <- Email related to open source for Solaris

3 12

[Dovecot] authentication failure with known good credentials???
by Dave Stevens 17 Aug '10

17 Aug '10

Hi, I have a problem on my server. To illustrate, I created a new user, unclewiggly, and set up a password. I then used sent an email from my usual account. Logging in with my browser I am able to see the inbox, the mail and contents correctly. I then set up a new instance of Eudora 7.1 on my windows 7 box with the appropriate login id and check the account using the correct password. The fetch fails with the client reporting an authentication failure. Ideas? Places to look? Logfiles I can search? Maillog doesn't seem very informative, should I send a snippet? Thanks, Dave -- "It is no measure of health to be well adjusted to a profoundly sick society." Krishnamurti

3 3

[Dovecot] Using a BSDI 4.X system for Dovecot
by The Doctor 17 Aug '10

17 Aug '10

It might be old but still worked. I am using Dovecot 1.2.11 hoping to replace QualComm Eudora and Cyrus IMAP. dovecot -n yields base_dir: /var/run/dovecot/ protocols: imap imaps pop3 pop3s ssl_listen: 204.209.81.1 ssl_cipher_list: ALL:!LOW:!SSLv2 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/dovecot/libexec/dovecot/imap-login login_executable(imap): /usr/dovecot/libexec/dovecot/imap-login login_executable(pop3): /usr/dovecot/libexec/dovecot/pop3-login mail_max_userip_connections(default): 10 mail_max_userip_connections(imap): 10 mail_max_userip_connections(pop3): 3 first_valid_uid: 100 last_valid_uid: 65535 last_valid_gid: 65535 mail_privileged_group: mail mail_location: mbox:~/mail:INBOX=/var/mail/%u dbox_rotate_days: 0 mail_executable(default): /usr/dovecot/libexec/dovecot/imap mail_executable(imap): /usr/dovecot/libexec/dovecot/imap mail_executable(pop3): /usr/dovecot/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /usr/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /usr/dovecot/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): auth default: executable: /usr/contrib/libexec/dovecot/dovecot-auth passdb: driver: passwd-file args: /etc/master.passwd userdb: driver: passwd userdb: driver: passwd-file args: /etc/passwd And running SSL here In my logs I see Aug 17 00:35:10 doctor dovecot: POP3(user1): Fatal: setregid(100(user),14(mail)) failed with euid=0(root): Operation not permitted Aug 17 00:35:15 doctor dovecot: IMAP(user2): Fatal: setregid(100(user),14(mail)) failed with euid=0(root): Operation not permitted Question: What are am I not doing right? -- Member - Liberal International This is doctor(a)nl2k.ab.ca Ici doctor(a)nl2k.ab.ca God, Queen and country! Never Satan President Republic! Beware AntiChrist rising! http://twitter.com/rootnl2k http://www.facebook.com/dyadallee Australia!! Vote to throw the REpublicans to the sharks!

2 1

[Dovecot] 2.0 not starting
by Luciano Mannucci 17 Aug '10

17 Aug '10

Hi everybody, I tried to upgrade my 1.2.13 dovecot to 2.0. The configure/make/install process seemed to work flawlessly. I created the dovenull user, converted my config with #src/config/doveconf -n -c /etc/dovecot.conf > /tmp/dovecot.conf and moved the result manually to /etc/dovecot. By typing "dovecot" (after having stopped the previous instance :), I get: Error: service(pop3-login): listen(::, 110) failed: Address already in use Error: service(imap-login): listen(::, 143) failed: Address already in use Fatal: Failed to start listeners tough nor "netstat -ta" nor "lsof -i" do show anything using port 110 or 143. What did I wrong? Here is my doveconf -n: baobab:/usr/src/local/mail/dovecot/current/dovecot-2.0.0 # doveconf -n # 2.0.0: /etc/dovecot/dovecot.conf # OS: Linux 2.6.27.45-0.1-pae i686 openSUSE 11.1 (i586) ext3 doveconf: Warning: Dovecot was last started using /etc/dovecot.conf, but this config is /etc/dovecot/dovecot.conf auth_cache_size = 3072 auth_debug = yes auth_mechanisms = plain login auth_username_format = %Lu auth_verbose = yes disable_plaintext_auth = no first_valid_gid = 0 first_valid_uid = 100 info_log_path = /var/log/dovecot/logfile.info log_path = /var/log/dovecot/logfile login_greeting = Dovecot at Baobab ready. mail_location = mbox:/var/spool/mailboxes/%u:INBOX=/var/spool/mail/%u:DIRNAME=mbox:INDEX=/var/dovecot_indexes/%u maildir_copy_with_hardlinks = no namespace { inbox = yes location = prefix = separator = . type = private } passdb { driver = pam } plugin { quota = maildir quota_rule = *:storage=300M } protocols = pop3 imap service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = root } service imap-login { inet_listener imaps { address = 212.45.144.44, 212.45.144.70, 192.168.134.44 } process_limit = 512 } service pop3-login { inet_listener pop3s { address = 212.45.144.44, 212.45.144.70, 192.168.134.44 } process_limit = 512 } ssl_ca = </etc/ssl/ca.crt ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } version_ignore = yes protocol imap { imap_client_workarounds = delay-newmail mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_enable_last = yes } protocol lda { postmaster_address = postmaster(a)mcs.it } luciano. -- /"\ /Via A. Salaino, 7 - 20144 Milano (Italy) \ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250 X AGAINST HTML MAIL / E-MAIL: posthamster(a)sublink.sublink.ORG / \ AND POSTINGS / WWW: http://www.mannucci.ORG/

4 5

[Dovecot] Master User Features I'd like to see
by Marc Perkel 17 Aug '10

17 Aug '10

Here's what I'd like. Limited master users, where someone can be a master users for some domains but not others. I think I could do what I want with the right kinds of variable passing that doesn't yet exist. Let me see if I can explain clearly. From the example in the wiki: auth_master_user_separator = * passdb { driver = sql args = /etc/dovecot/dovecot-sql-master.conf.ext master = yes pass = yes } passdb { driver = sql args = /etc/dovecot/dovecot-sql.conf.ext } userdb { driver = sql args = /etc/dovecot/dovecot-sql.conf.ext } Login looks like this: # telnet localhost 143 * OK Dovecot ready. 1 login loginuser*masteruser masterpass 1 OK Logged in. I'm assuming that the masteruser and masterpass is passed to the master passdb and when doing so the variable %u is the master user. I assume that %n and %d also represent the name and domain part of the master user. What I need is to also be able to have variables for the loginuser passed to the master user query. Something like %lu, %ln, and %ld perhaps. That way with MySQL tricks I might be able to see if the master user is master for that particular login user. That way I can give domain owners or owners of multiple domains the ability to manage the email accounts within their scope of permission.

5 17

[Dovecot] cluster with dsync mirror
by Bryan Vyhmeister 17 Aug '10

17 Aug '10

I have an idea for running a pair of redundant dovecot mail servers that may be odd but it might work. I'm interested in any thoughts on the topic. Would it work to run 'dsync mirror' every minute against either mdbox or sdbox mailbox on a dedicated network connection between two (or potentially three or four) mail servers? I'm trying to avoid using a NAS/SAN or some other dedicated NFS server in a simple environment with a limited number of users. Everything else about the systems could be identical. Both could receive mail using Postfix with dovecot LDA. Thank you. Bryan

4 5

Re: [Dovecot] v2.0.0 released
by Dennis Clarke 17 Aug '10

17 Aug '10

> On 16.8.2010, at 23.25, Dennis Clarke wrote: > >> "imap-match.c", line 199: identifier redeclared: imap_match_dup > > I think someone reported this problem earlier .. but I'm not sure. Anyway > I've no idea why it would complain about this. > >> So that stops me while I figure out what the issue is with imap-match.h >> and/or imap-match.c in the Solaris world while using Sun Studio 11. > > I heard it compiles ok with Sun Studio 12.1. > Everything was going swimmingly with a GCC based compile. After that was finished I then moved onto a "make install" of course, then this happened : gmake[3]: Entering directory `/export/medusa/dclarke/build/dovecot/sparc/dovecot-2.0.0-sparcv8-002/src/auth' test -z "/opt/csw/libexec/dovecot" || ../.././install-sh -c -d "/opt/csw/libexec/dovecot" /opt/csw/bin/bash ../../libtool --mode=install ../.././install-sh -c auth checkpassword-reply '/opt/csw/libexec/dovecot' libtool: install: ../.././install-sh -c .libs/auth /opt/csw/libexec/dovecot/auth libtool: install: ../.././install-sh -c .libs/checkpassword-reply /opt/csw/libexec/dovecot/checkpassword-reply test -z "/opt/csw/libexec/dovecot/auth" || ../.././install-sh -c -d "/opt/csw/libexec/dovecot/auth" mkdir: "/opt/csw/libexec/dovecot/auth": Exists but is not a directory mkdir: "/opt/csw/libexec/dovecot/auth": Exists but is not a directory gmake[3]: *** [install-auth_moduleLTLIBRARIES] Error 1 gmake[3]: Leaving directory `/export/medusa/dclarke/build/dovecot/sparc/dovecot-2.0.0-sparcv8-002/src/auth' gmake[2]: *** [install-am] Error 2 gmake[2]: Leaving directory `/export/medusa/dclarke/build/dovecot/sparc/dovecot-2.0.0-sparcv8-002/src/auth' gmake[1]: *** [install-recursive] Error 1 gmake[1]: Leaving directory `/export/medusa/dclarke/build/dovecot/sparc/dovecot-2.0.0-sparcv8-002/src' gmake: *** [install-recursive] Error 1 # file /opt/csw/libexec/dovecot/auth /opt/csw/libexec/dovecot/auth: ELF 32-bit MSB executable SPARC Version 1, dynamically linked, not stripped # ls -lap /opt/csw/libexec/dovecot/auth -rwxr-xr-x 1 root other 338312 Aug 17 02:33 /opt/csw/libexec/dovecot/auth # I'm not sure why /opt/csw/libexec/dovecot/auth would be expected to be a dir as opposed to the file that it is. However .. this is where I get stopped. I should point out that I created the users dovenull and dovecot with both in group dovecot however I doubt that has anything to do with the install failing. -- Dennis Clarke dclarke(a)opensolaris.ca <- Email related to the open source Solaris dclarke(a)blastwave.org <- Email related to open source for Solaris

1 0

Re: [Dovecot] v2.0.0 released
by Dennis Clarke 17 Aug '10

17 Aug '10

> I wonder how GCCFSS would do. Will it even run under Solaris 8? # which gcc /opt/csw/gcc4/bin/gcc # gcc --version gcc (Blastwave.org Inc. Mon Aug 9 07:10:45 GMT 2010) 4.5.1 Copyright (C) 2010 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # uname -a SunOS mimas 5.8 Generic_127721-03 sun4u sparc SUNW,UltraAX-i2 # psrinfo -v Status of virtual processor 0 as of: 08/17/10 00:58:04 on-line since 07/06/10 12:03:37. The sparcv9 processor operates at 500 MHz, and has a sparcv9 floating point processor. Is that baseline Sparc enough for you ? ;-) -- Dennis Clarke dclarke(a)opensolaris.ca <- Email related to the open source Solaris dclarke(a)blastwave.org <- Email related to open source for Solaris

1 0

Re: [Dovecot] v2.0.0 released
by Dennis Clarke 17 Aug '10

17 Aug '10

> On 8/16/10 8:38 PM, Dennis Clarke wrote: >>> Works fine here with the 12.1 compiler. Solaris 10 on UltraSPARC, >>> current patches, on both the OS and the compilers. My CFLAGS: >>> >>> -fast -xtarget=ultra3 -m32 -xarch=sparcvis2 > > >> The is ye ol'production Solaris 8 and thus Sun Studio 11 is needed. > > Oh. Eeeew. :) Hey, there are banks and telco places all over that are running it and they *refuse* to upgrade. I know of government sites that are still on old E450's because they have not died yet. No kidding. Some of that old Sun gear just WILL NOT bloody die. The way to justify the capital expenditure on a new Sun Sparc server is to spill a coffee on/in it. 8-P >> Problem solved simply by using GCC 4.5.1 from Blastwave ( of course ). > > I wonder how GCCFSS would do. Will it even run under Solaris 8? Why not ? It is a rock solid kernel and you can build it and see :-) >> Question for you: why would you use -m32 with an -xarch=sparcvis2 ? Why >> not go for greatest possible portability and range of processors with >> something like this : >> >> CFLAGS=-m32 -Qy -Xa -xbuiltin=%none -xnolibmil -xnolibmopt -xcode=pic32 >> -xildoff -xregs=no%appl -xs -xstrconst -D_TS_ERRNO > > Because I don't intend to run it on a range of processors. =) ah ... I am in a different world. >> If you feel like some optimization then chuck in -xO3 and -xdepend >> however >> I'd test the resultant bins from a basic compile first. >> >> Just my 0.02 > > Fair enough, and I appreciate your advice. My goal in this case is > to generate the fastest binaries possible on the machine it's being > built on, which is identical to the machine it's going to be run on. > There's zero need for portable binaries in this particular installation. > In that case run fpversion : fpversion A SPARC-based CPU is available. Kernel says CPU's clock rate is 900.0 MHz. Kernel says main memory's clock rate is 150.0 MHz. Sun-4 floating-point controller version 0 found. An UltraSPARC chip is available. Use "-xtarget=ultra3cu -xcache=64/32/4:8192/512/2" code-generation option. See those compiler options ? Use them. Also put in -xO3 and -xdepend and then the compile will take a lot longer but you will be happy you waited. Sun Studio compilers can really rock if you know how to push them. -- Dennis Clarke dclarke(a)opensolaris.ca <- Email related to the open source Solaris dclarke(a)blastwave.org <- Email related to open source for Solaris

1 0

Re: [Dovecot] v2.0.0 released
by Dennis Clarke 17 Aug '10

17 Aug '10

> On 17.8.2010, at 1.28, Dennis Clarke wrote: > >> *** Warning: Linking the shared library lib30_imap_zlib_plugin.la >> against >> the loadable module >> *** lib20_zlib_plugin.so is not portable! >> >> Not too sure what is up with that but I'll look into it. > > That's normal. It doesn't need to be portable. > In that case ... awesome :-) I'll let you know when I get packages into testing QC and then for release. However I am going to rename the package to dovecot2 in order to separate it from dovecot 1.x installs. My idea there is to allow the user to continue with the dovecot 1.x line in the event of patch updates and further releases from that tree ( like dovecot 1.2.13 ) while also maintaining the ver 2.x family. However I don't think I'll support multiple instances of dovecot ( regardless of version ) in the same Solaris zone. If the user wants that then they can do all the uid/pid hackery themselves. -- Dennis Clarke dclarke(a)opensolaris.ca <- Email related to the open source Solaris dclarke(a)blastwave.org <- Email related to open source for Solaris

1 0

Re: [Dovecot] v2.0.0 released
by Dennis Clarke 17 Aug '10

17 Aug '10

>> So that stops me while I figure out what the issue is with imap-match.h >> and/or imap-match.c in the Solaris world while using Sun Studio 11. > > Works fine here with the 12.1 compiler. Solaris 10 on UltraSPARC, > current patches, on both the OS and the compilers. My CFLAGS: > > -fast -xtarget=ultra3 -m32 -xarch=sparcvis2 > The is ye ol'production Solaris 8 and thus Sun Studio 11 is needed. Problem solved simply by using GCC 4.5.1 from Blastwave ( of course ). Question for you: why would you use -m32 with an -xarch=sparcvis2 ? Why not go for greatest possible portability and range of processors with something like this : CFLAGS=-m32 -Qy -Xa -xbuiltin=%none -xnolibmil -xnolibmopt -xcode=pic32 -xildoff -xregs=no%appl -xs -xstrconst -D_TS_ERRNO If you feel like some optimization then chuck in -xO3 and -xdepend however I'd test the resultant bins from a basic compile first. Just my 0.02 -- Dennis Clarke dclarke(a)opensolaris.ca <- Email related to the open source Solaris dclarke(a)blastwave.org <- Email related to open source for Solaris

2 1

Re: [Dovecot] v2.0.0 released
by Dennis Clarke 17 Aug '10

17 Aug '10

> On 16.8.2010, at 23.25, Dennis Clarke wrote: > >> "imap-match.c", line 199: identifier redeclared: imap_match_dup > > I think someone reported this problem earlier .. but I'm not sure. Anyway > I've no idea why it would complain about this. > >> So that stops me while I figure out what the issue is with imap-match.h >> and/or imap-match.c in the Solaris world while using Sun Studio 11. > > I heard it compiles ok with Sun Studio 12.1. I will try GCC and let you know what I see : [mimas] gcc --version gcc (Blastwave.org Inc. Mon Aug 9 07:10:45 GMT 2010) 4.5.1 Copyright (C) 2010 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. No surprise that GCC works fine : [mimas] ls -lap ./src/master/.libs/dovecot -rwxr-xr-x 1 dclarke csw 86388 Aug 17 00:09 ./src/master/.libs/dovecot [mimas] file ./src/master/.libs/dovecot ./src/master/.libs/dovecot: ELF 32-bit MSB executable SPARC Version 1, dynamically linked, not stripped [mimas] elfdump -d ./src/master/.libs/dovecot Dynamic Section: .dynamic index tag value [0] NEEDED 0xe21 libdovecot.so.0 [1] NEEDED 0xe31 libintl.so.8 [2] NEEDED 0xe3e libdl.so.1 [3] NEEDED 0xe49 libnsl.so.1 [4] NEEDED 0xdf6 libsocket.so.1 [5] NEEDED 0xe55 libiconv.so.2 [6] NEEDED 0xe0e libc.so.1 [7] NEEDED 0xe63 librt.so.1 [8] INIT 0x1b71c [9] FINI 0x1b738 etc etc ... I did see a few odd messages fly by like this : *** Warning: Linking the shared library lib30_imap_zlib_plugin.la against the loadable module *** lib20_zlib_plugin.so is not portable! Not too sure what is up with that but I'll look into it. -- Dennis Clarke dclarke(a)opensolaris.ca <- Email related to the open source Solaris dclarke(a)blastwave.org <- Email related to open source for Solaris

2 1

[Dovecot] Imap, flags. Dsync
by Henrique Fernandes 17 Aug '10

17 Aug '10

Does dsync mirror follow up flags ? I am testing here, and if i flag an msg as follow up, dsync does not do anything. It suppouse to be like that ? Thanks! []'sf.rique

2 2

Re: [Dovecot] Subdomain Migration
by Jerrale G 16 Aug '10

16 Aug '10

On 8/16/2010 3:44 AM, ramesh wrote: > Hi All, > > I would like have suggestion for changing subdomain (belongs to ISP) to own domain, the scenario as below. > > Presently we have subdomain from ISP ( @xxx.isp.net) > email id : ramesh(a)xxx.isp.net > > ISP charges huge amount,thou others ISP charges less. so we have planned to migrate to our own registered domain and terminate existing ISP. > > Now my requirement is email coming to ramesh(a)xxx.isp.net (Mail server connected to present ISP) should forward to ramesh(a)mydomain.co.in (Mail server connected to new ISP) > > Please send me suggestion to follow or URL's explain briefly. > > Thanks. > > Regards, > Ramesh > > > > > > They have to send mail to you(a)yournewdomain.com unless you plan on keeping your isp's subdomain Jerrale G. SC Senior Admin

2 1

Re: [Dovecot] v2.0.0 released
by Dennis Clarke 16 Aug '10

16 Aug '10

> On 08/16/2010 06:46 PM Dennis Clarke wrote: >> â¦ >> NOTE: This is the UNSTABLE development branch of Dovecot v2.0. >> >> ^^^^^^^^^^^^^ > > See: http://dovecot.org/list/dovecot/2010-August/051736.html > wow ... I was hoping I was the first :-\ -- Dennis Clarke dclarke(a)opensolaris.ca <- Email related to the open source Solaris dclarke(a)blastwave.org <- Email related to open source for Solaris

1 0

Re: [Dovecot] v2.0.0 released
by Dennis Clarke 16 Aug '10

16 Aug '10

> http://dovecot.org/releases/2.0/dovecot-2.0.0.tar.gz > http://dovecot.org/releases/2.0/dovecot-2.0.0.tar.gz.sig > > As promised last Friday, here's the v2.0.0 release finally. I'm > cautiously optimistic that v2.0.1 won't (have to) be released for a few > weeks, since there was quite a lot of testing and fixing going on in the > RC stage. > cool .. .however .. should I see this message at the end of the configure stage : . . . passdbs ........ : static passwd passwd-file shadow pam checkpassword ldap sql : -bsdauth -sia -vpopmail userdbs ........ : static prefetch passwd passwd-file checkpassword ldap sql : -vpopmail -nss SQL drivers .... : mysql sqlite : -pgsql NOTE: This is the UNSTABLE development branch of Dovecot v2.0. ^^^^^^^^^^^^^ That won't go well with the Solaris crowd. Just FYI. -- Dennis Clarke dclarke(a)opensolaris.ca <- Email related to the open source Solaris dclarke(a)blastwave.org <- Email related to open source for Solaris

2 1

Re: [Dovecot] Upgrade to 2.0 - Not so smooth
by Dennis Clarke 16 Aug '10

16 Aug '10

> On 2010-08-16 07:16:46 -0700, Marc Perkel wrote: >> Maybe dovecot could use the "nobody" user if dovenull doesn't exist? > > you could just read the warning message, create the user and stop > worrying? > > and no ... it shouldnt fallback to nobody. a broken set up is a broken > setup and needs to be fixed. > Wow. Well said. -- Dennis Clarke dclarke(a)opensolaris.ca <- Email related to the open source Solaris dclarke(a)blastwave.org <- Email related to open source for Solaris

1 0

[Dovecot] dovecot: Killed with signal 15 (by pid=14267
by Jerrale G 16 Aug '10

16 Aug '10

I don't know if dovecot 2.0 will have this already or not but, when dovecot is stopped or started, it would be nice to have the PID reported in the log for various uses. Jerrale Gayle SC Senior Admin

2 1

[Dovecot] Split number of imap-login and pop3-login processes
by Mischa Peters 16 Aug '10

16 Aug '10

Hi All, Is there a way to define the number for imap-login processes and pop3-login processes separately? My mail server is getting more IMAP clients and much less POP3 clients these days and it continues to run out of authentication processes. I have been increasing login_max_processes_count the last couple of days and I noticed that it's split between IMAP and POP3. All 129 imap-login processes are tied up while there are only 3 of the 129 pop3-login processes in use. Any help would be greatly appreciated! Thanx!! Mischa mail:~ # dovecot --version 1.2.12 mail:~ # dovecot -n # 1.2.12: /usr/local/etc/dovecot.conf # OS: FreeBSD 8.1-RELEASE amd64 zfs base_dir: /var/run/dovecot/ protocols: imap imaps pop3 pop3s listen(default): *,[::]:143 listen(imap): *,[::]:143 listen(pop3): *,[::]:110 ssl_listen(default): *,[::]:993 ssl_listen(imap): *,[::]:993 ssl_listen(pop3): *,[::]:995 ssl_ca_file: /usr/local/etc/certs/gd_bundle.crt ssl_cert_file: /usr/local/etc/certs/cert.crt ssl_key_file: /usr/local/etc/certs/key.key disable_plaintext_auth: no login_dir: /var/run/dovecot//login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_processes_count: 256 mail_max_userip_connections(default): 20 mail_max_userip_connections(imap): 20 mail_max_userip_connections(pop3): 6 verbose_proctitle: yes first_valid_uid: 144 first_valid_gid: 144 mail_access_groups: postfix mail_location: maildir:/var/mail/virtual/%u/ mbox_write_locks: fcntl mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login passdb: driver: sql args: /usr/local/etc/dovecot-mysql.conf userdb: driver: sql args: /usr/local/etc/dovecot-mysql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix @mail:~ # grep -v '^ *$#.*$\?$' dovecot-mysql.conf driver = mysql default_pass_scheme = CRYPT connect = host=***** dbname=postfix user=postfix password=******** password_query = SELECT password FROM mailbox WHERE username='%u' AND active='1' user_query = SELECT maildir, 144 AS uid, 144 AS gid FROM mailbox WHERE username='%u' AND active='1'

2 1

[Dovecot] Forcing users to change passwords
by Marc Perkel 16 Aug '10

16 Aug '10

Suppose I have users with a default password like "change-my-password" and I want to detect users who haven't changed their password and alert (nag) them about changing it. How would I do that?

3 2

[Dovecot] Address book for 2.0?
by Jerrale G 16 Aug '10

16 Aug '10

2.0 could include a directory service, like MS Exchange, where people's address books within IMAP clients could be stored on the server and retrievable by the clients. Its a headache for users to roam from pc to pc and not have someone's address stored locally on another. Jerrale G SC Senior Admin

2 1

Re: [Dovecot] Upgrade to 2.0 - Not so smooth
by Dennis Clarke 15 Aug '10

15 Aug '10

> On 15.8.2010, at 17.03, Marc Perkel wrote: > >> Starting Dovecot Imap: Fatal: service(pop3-login) User doesn't exist: >> dovenull >> >> Just some real time feedback. I don't know what dovenull user is or why >> it is necessary. > > I added now to http://wiki2.dovecot.org/Upgrading/2.0 : > > - Dovecot uses two internal users now by default: dovenull and dovecot. > You need to create the dovenull user or change default_login_user > setting. > Dovecot 2.x seems to be very close to release grade. Could you provide a guess as to when it will be released so that I can plan downtime for the upgrade on my production servers? -- Dennis Clarke dclarke(a)opensolaris.ca <- Email related to the open source Solaris dclarke(a)blastwave.org <- Email related to open source for Solaris

2 1

Re: [Dovecot] turn Usernames in Lowercase
by Leander S. 15 Aug '10

15 Aug '10

Hi again, I solved the issue. Thanks any way and excuse the noise. http://wiki.dovecot.org/Variables Regards ________________________________________________________________________ Hi, I'm just curious how to force usernames to be modified to lowercase letters if one mixes uper and lower case letters to one salad? Cause my SpamAssassin gets confuesd and treats different spellings of Usernames as different Users - which is uncool. I've heard about something you can add in your dovecot.config to enforce lowercase letters only. Thanks

1 0

[Dovecot] turn Usernames in Lowercase
by Leander S. 15 Aug '10

15 Aug '10

Hi, I'm just curious how to force usernames to be modified to lowercase letters if one mixes uper and lower case letters to one salad? Cause my SpamAssassin gets confuesd and treats different spellings of Usernames as different Users - which is uncool. I've heard about something you can add in your dovecot.config to enforce lowercase letters only. Thanks

1 0

[Dovecot] Fatal: dict_driver_register(mysql): Already registered
by Jerrale G 15 Aug '10

15 Aug '10

Warning: Corrected permissions for login directory /var/run/dovecot/login ls -l /var/run/dovecot srw-rw-rw- 1 root root 0 Aug 10 15:02 auth-master srw------- 1 mail mail 0 Aug 10 15:02 auth-worker.2774 srwxrwxrwx 1 root root 0 Aug 10 15:02 dict-server lrwxrwxrwx 1 root root 17 Aug 10 15:02 dovecot.conf -> /etc/dovecot.conf drwxr-x--- 2 root dovecot 4096 Aug 10 15:02 login -rw------- 1 root root 5 Aug 10 15:02 master.pid Everything works, eventually. All mail will sooner or later get delivered, using dovecot LDA from postfix, but these errors rampage the log several times. I recently added managesieve, expires, and finished the quota which I thought was achived by simply having quota_rule as a result of mysql. Aug 10 15:07:57 server1 dovecot: IMAP(someone(a)sheltoncomputers.com): read(/var/run/dovecot/dict-server) failed: Timeout after 30 seconds Aug 10 15:07:57 server1 dovecot: dict: Fatal: dict_driver_register(mysql): Already registered Aug 10 15:08:09 server1 last message repeated 4428 times On another note, Thunderbird is starting to get on my nerves, sending this message before I was finished. Here is the relevant config: dovecot-mysql query: user_query = SELECT CONCAT('/home/mail/', mailboxes.domain, '/', mailboxes.username, '/') AS home, CONCAT('/home/mail/', mailboxes.domain, '/', mailboxes.username, '/sieve/', mailboxes.username, '.sieve') as sieve, CONCAT('/home/mail/', mailboxes.domain, '/', mailboxes.username, '/sieve/') as sieve_dir, CONCAT('/home/mail/', mailboxes.domain, '/', mailboxes.username, '/mail/') AS maildir, uid AS uid, gid AS gid, CONCAT('maildir:storage=', ROUND(mailboxes.quota/1200), 'M') AS quota_rule, 'Trash:ignore' AS quota_rule2 FROM mail.mailboxes WHERE username = '%n' AND domain = '%d' AND active = '1' dovecot.conf: protocol managesieve { listen = localhost:2001 managesieve_implementation_string = dovecot managesieve_logout_format = bytes ( in=%i : out=%o ) mail_executable = /usr/libexec/dovecot/managesieve login_executable = /usr/libexec/dovecot/managesieve-login } auth_debug = no auth default { mechanisms = plain login passdb sql { args = /etc/dovecot/dovecot-mysql.conf # scheme = cram-md5 } userdb sql { args = /etc/dovecot/dovecot-mysql.conf } user = mail socket listen { client { path = /var/spool/postfix/private/auth user = postfix group = postfix mode = 0660 } master { path = /var/run/dovecot/auth-master mode = 0666 } } } dict { # # NOTE: dict process currently runs as root, so this file will be owned as root. expire = mysql:/etc/dovecot/dict-expire.conf quotadict = mysql:/etc/dovecot/dict-quota.conf } plugin { quota = dict:user::proxy::quotadict expire = Trash 7 Trash/* 7 Spam 30 expire_dict = proxy::expire expire_altmove = * 2555 sieve_global_path = /home/mail/sieve/global.sieve sieve_global_dir = /home/mail/sieve sieve_dir=/home/mail/%d/%n/sieve } As said, everything works, eventually, but mail delivery is delayed a lot. With The dict {} and expire-related parts commented out, operation has no errors or delays; performance is exceptional with maildir, quota, sieve, and managesieve. I don't think managesieve would patch any part of the dictionary code as it only has to do with another service process, not a plugin; if the patching was to cause problems with other services, for the service definition coding, the other services would have a problem, correct? The expires dictionary mysql table was being correctly used, with one day of use, as there are 10000 records; I'm going to have to revise the mysql indexes for performance in case I am able to fix the dictionary problem. We like the 1.2.13 version of dovecot, as far as security, and wonder how I can find a correct defintion scripting for the dict {}, from a previous version, and merge. We are use to windows compilations. I am skeptical to go to dovecot 2.0 as our services are in production and 2.0 is beta. I have recompiled several times with fresh sources of dovecot 1.2.13, managesieve 0.11.11 patchl, and sieve 1.0.17 as directed by the Dovecot Wiki. Jerrale G, SCA

3 9

[Dovecot] Dovecot Upgrade Manual for 2.0 from 1.2.14 snapshot
by Jerrale G 15 Aug '10

15 Aug '10

Is there a reference manual for changes in configuration between dovecot 1.2.X to 2.0 rc5. I know there is a config upgrade tool but I would rather learn the new changes and then implement them? -- Jerrale G. Jerrale G. SC Senior Admin

2 4

Re: [Dovecot] \" character in folder name results in strange LIST
by Timo Sirainen 14 Aug '10

14 Aug '10

On 14.8.2010, at 20.52, Samuel Kvasnica wrote: > * LIST (\HasNoChildren) "/" "folder1" > * LIST (\HasNoChildren) "/" "folder2" > * LIST (\HasNoChildren) "/" {9} > six"wafer > . OK List completed. > > Note the {9} length of the following real folder name. Is this normal > handling of special folder names ? Yes. > Mail clients do not seem to like this response. What clients? They're buggy then.. Well, of course, way too many clients are :(

1 0

[Dovecot] v2.0.rc6 released
by Timo Sirainen 14 Aug '10

14 Aug '10

http://dovecot.org/releases/2.0/rc/dovecot-2.0.rc6.tar.gz http://dovecot.org/releases/2.0/rc/dovecot-2.0.rc6.tar.gz.sig I expect this to be the last release candidate. Unless release critical bugs are reported, I'll update the version number to v2.0.0 on Monday morning without any other changes. Since rc5 there have been mainly some small fixes and some error message improvements. The only (somewhat) important fixes are: - dict quota didn't always decrease quota when messages were expunged - Shared INBOX wasn't always listed with FS layout

2 1

[Dovecot] Dovecot mailing list filter update
by Timo Sirainen 14 Aug '10

14 Aug '10

I added some new filters to this list that will bounce your mail if it doesn't like it. If you think your bounced mail was legitimate, let me know and I'll look at fixing the scripts.

1 0

[Dovecot] Maildir over NFS
by CJ Keist 14 Aug '10

14 Aug '10

I'm working on bring up a new mail server to replace our current one. Our current mail server is running dovecot 1.1.16, with postfix using mbox format. User inboxes are stored locally on the mail server and all other mail folders in users home directory under mail which is NFS mounted on the mail server. For our new mail server I'm looking to switch to the Maildir format. Some years ago I remember reading that it was not recommended to run Maildir format over NFS. Now I'm looking at several posts that seem to indicate that Maildir should run fine over NFS. I'm a little concerned about running Maildir over NFS, especially from the howto conversion pages I read would move all messages over to the User ~/Maildir folder including the inbox. So having every single mail transaction going over NFS doesn't seem the smart thing to do. So question I have for the dovecot team, does running Maildir over NFS work well? Or would you recommend that all user mail folders be stored locally on the mail server when using Maildir? We have about 3400 users, doing about 30k mail deliveries daily. Some users have 10's of thousands of mail messages in hundreds of mail folders. Thanks... -- C. J. Keist Email: cj.keist(a)colostate.edu UNIX/Network Manager Phone: 970-491-0630 Engineering Network Services Fax: 970-491-5569 College of Engineering, CSU Ft. Collins, CO 80523-1301 All I want is a chance to prove 'Money can't buy happiness'

11 24

[Dovecot] quota_warning bug?
by jeroen＠intuxicated.org 13 Aug '10

13 Aug '10

Hi, Today I was testing with dovecot 2.0 rc5 and experienced some odd behaviour with quota_warning rules. It's reproducable. When I set a rule (this one simply writes some message to a text file) and go over quota (2 messages in this case), it works as expected. But if I restart my client, remove one message, restart my client again and remove the last message from my inbox, it executes the warning rule again. Does this sound familiar to anyone? I tested with the debian package dovecot_2.0.rc5-0~auto+8 found in rename-it.nl's repository. Thanks. Best regards, Jeroen Koekkoek

2 2

[Dovecot] passwd(contact@akairnet.com, 91.121.76.71): unknown user
by Kurt22 13 Aug '10

13 Aug '10

I have a probleme with my configuration of dovecot I think. I have no problem for send a email but I don't want receive a email. In my /var/log/mail.log I have : Quote: connect from mail-ww0-f45.google.com[74.125.82.45] Aug 11 14:21:58 ns351550 postfix/smtpd[1844]: NOQUEUE: reject: RCPT from mail-ww0-f45.google.com[74.125.82.45]: 550 5.1.1 <contact(a)akairnet.com>: Recipient address rejected: User unknown in local recipient table; from=<fwdavy(a)gmail.com> to=<contact(a)akairnet.com> proto=ESMTP helo=<mail-ww0-f45.google.com> Aug 11 14:21:58 ns351550 postfix/smtpd[1844]: disconnect from mail-ww0-f45.google.com[74.125.82.45] so...problem on : Log dovecot : dovecot: 2010-08-11 17:53:14 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=91.121.76.71 rip=91.121.76.71 resp=AGNvbnRhY3RAYWthaXJuZXQuY29tAFgyMmRiNzgh dovecot: 2010-08-11 17:53:14 Info: auth-worker(default): sql(contact(a)akairnet.com,91.121.76.71): query: SELECT CONCAT(user.user, '@', domains.name) AS user,user.password FROM user,domains WHERE user.domain_id=domains.id AND CONCAT(user.user, '@', domains.name)='contact(a)akairnet.com' dovecot: 2010-08-11 17:53:14 Info: auth(default): client out: OK 1 user=contact(a)akairnet.com dovecot: 2010-08-11 17:53:14 Info: auth(default): master in: REQUEST 1 13716 1 dovecot: 2010-08-11 17:53:14 Info: auth(default): passwd(contact(a)akairnet.com,91.121.76.71): lookup dovecot: 2010-08-11 17:53:14 Info: auth(default): passwd(contact(a)akairnet.com,91.121.76.71): unknown user dovecot: 2010-08-11 17:53:14 Info: auth(default): master out: USER 1 contact(a)akairnet.com uid=5000 gid=5000 home=/home/var/vmail/akairnet.com/contact dovecot: 2010-08-11 17:53:14 Info: imap-login: Login: user=<contact(a)akairnet.com>, method=PLAIN, rip=91.121.76.71, lip=91.121.76.71, secured dovecot: 2010-08-11 17:53:14 Info: IMAP(contact(a)akairnet.com): Disconnected: Logged out Quote: Recipient address rejected: User unknown in local recipient table In my main.cf I have : Quote: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file = /etc/ssl/certs/postfix.pem smtpd_tls_key_file = /etc/ssl/private/postfix.pem smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_auth_only = yes # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mail.akairnet.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = mail.akairnet.com mydestination = localhost, localhost.akairnet.com, akairnet.com #local_recipient_maps = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128, 91.121.76.71 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all home_mailbox = Maildir/ #virtual_alias_maps = mysql:/etc/postfix/mysql-virtual_aliases.cf,mysql:/etc/postfix/mysql-virtual_aliases_comptes.cf virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual_domaines.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual_comptes.cf #virtual_mailbox_domains = mysql:/etc/postfix/mysql/virtual-mailbox-domains.cf virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 #virtual_mailbox_maps = mysql:/etc/postfix/mysql/virtual-mailbox-maps.cf #virtual_alias_maps = mysql:/etc/postfix/mysql/virtual-alias-maps.cf,mysql:/etc/postfix/mysql/email2email.cf virtual_transport = dovecot dovecot_destination_recipient_limit = 1 #smtpd_sasl_type = dovecot #smtpd_sasl_path = private/auth #smtpd_sasl_auth_enable = yes #smtpd_tls_auth_only = yes #smtpd_recipient_restrictions = permit_mynetworks,permit_auth_destination,permit_sasl_authenticated,reject_unauth_destination smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes smtpd_client_restrictions = permit_mynetworks, permit_sasl_authenticated smtpd_sender_restrictions = permit_mynetworks, permit_sasl_authenticated smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination maximal_queue_lifetime = 3d bounce_queue_lifetime = 3d In dovecot.conf for auth default I have : Quote: auth default { mechanisms = plain login passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb passwd { } userdb static { args = uid=5000 gid=5000 home=/home/var/vmail/%d/%n allow_all_users=yes } socket listen { master { # Master socket provides access to userdb information. It's typically # used to give Dovecot's local delivery agent access to userdb so it # can find mailbox locations. #path = /var/run/dovecot/auth-master #mode = 0600 # Default user/group is the one who started dovecot-auth (root) #user = #group = path = /var/run/dovecot/auth-master mode = 0600 user = vmail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } You want to help me ? :confused: -- View this message in context: http://old.nabble.com/passwd%28contact%40akairnet.com%2C91.121.76.71%29%3A-… Sent from the Dovecot mailing list archive at Nabble.com.

3 13