- dovecot - dovecot.org

Re: [Dovecot] expire plugin no delete 1.2.1 / 1.2.2
by Robert Schetterer 03 Aug '09

03 Aug '09

Robert Schetterer schrieb: > Timo Sirainen schrieb: >> On Fri, 2009-07-31 at 17:21 +0200, Robert Schetterer wrote: >>> Hi Timo, >>> so now its clear, the mail >>> did not got deleted if i now do >>> >>> Info: robert(a)schetterer.com/Trash: no messages left >> So, it worked? "no messages left" means if you didn't give --test it >> would have deleted all messages from the mailbox. >> > Hi Timo, no it didnt work > i repeated the test since then twice > the mail was not deleted > Hi Timo, no it didnt work i repeated the test since then twice the mail was not deleted -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

1 0

[Dovecot] How to delete retrieved mail
by Don Muller 03 Aug '09

03 Aug '09

Hi All, I use Dovecot and XMail on a QNAP TS-509 NAS. QNAP has combined the two into a package they call XDove. Everything seems to be working great except for one thing. When Dovecot retrieves the mail from XMail it is not removing it from XMail. It is leaving a copy on XMail. Is there an option I can set in Dovecot so it will delete the mail message from XMail when it retrieves it. Thanks Don

2 1

[Dovecot] Client Cert Auth Problem
by Christian Felsing 03 Aug '09

03 Aug '09

Hello, is there a config possible which supports both of following authentication schemes ? 1st: If user presents a client certificate, he can log in w/o username/password, where user id comes from CN. Accepting any password is not the right solution. 2nd: If user does not present a client certificate, he have to authenticate by username/password. In both cases user data is read from userdb LDAP, which is already working. I was not able to get both auth schemes working at same time. With Postfix such a config is fully operable. regards Christian

2 1

[Dovecot] Public folders, individual SEEN flags
by Keith Edmunds 03 Aug '09

03 Aug '09

Hi list I'm trying to set up shared public folders with individual SEEN flags. I've set up three test users, but as soon as one of them marks a mail in the public folder as seen or unseen, that change is propagated to all three users. If I watch the dovecot.index.log file in each user's directory for the public folder, I see all three change their last access time as soon as one user changes the SEEN status of a mail. Any hints as to what I'm doing wrong gratefully received, thanks. -------------------------------------------------------------------------------- # dovecot --version 1.2.1 -------------------------------------------------------------------------------- # dovecot -n # 1.2.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-686 i686 Debian 5.0.2 log_timestamp: %Y-%m-%d %H:%M:%S disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: public separator: / prefix: shared/ location: maildir:/home/publicfolders:INDEX=~/Maildir/public list: yes auth default: passdb: driver: pam userdb: driver: passwd -------------------------------------------------------------------------------- # ls -l /home/publicfolders/dovecot-shared -rw-rw-r-- 1 publicfolders publicfolders 0 2009-07-27 15:01 /home/publicfolders/dovecot-shared --------------------------------------------------------------------------------

2 3

[Dovecot] parameter "mail_location" and variables
by maximatt 03 Aug '09

03 Aug '09

hi.... i have virtual users stored in ldap server and i must to do some modifications that requiere to chage mail_location value... the solution comes to use the "uid" value stored in ldap server for users on mail_location parameter... i can see in http://wiki.dovecot.org/Variables that i can't do them (i uses sasl authentication) so.. ¿exist any way to get a value from ldap server and use them in mail_location parameter? thanks in advance!!! -- Salu2 ;)

2 3

[Dovecot] expire plugin no delete 1.2.1
by Robert Schetterer 03 Aug '09

03 Aug '09

Hi Timo, all of my tests fail with expire plugin, mail simply not get deleted i cant find any stuff in the logs why it does not or should not work. My guess that there is a problem with virtual plugin and/or shared namespace. It shouldnt be a problem with acl starting the script over cron as root am i right ? do you have any idea why it fails, is there a way to ignore all unneeded shared or virtual namespaces ? should there be a entry in the log when expire time is reached and deletion is unsuccessfull ? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 5

[Dovecot] Shared mailboxes and INBOX
by Keith Edmunds 03 Aug '09

03 Aug '09

I'm trying to implement a shared mailbox: in other words, we have a generic email address ("security@") which we want a number of users to be able to monitor. The problem I have is that users can see folders under that shared mailbox but can't see the INBOX. All the users in question have their own INBOX in their private namespace, so does this raise a conflict with monitoring another mailbox's INBOX? Configuration: -------------------------------------------------------------------------------- # dovecot -n # 1.2.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-686 i686 Debian 5.0.2 log_timestamp: %Y-%m-%d %H:%M:%S disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: public separator: / prefix: shared/ location: maildir:/home/publicfolders:INDEX=~/Maildir/public list: yes namespace: type: shared separator: / prefix: security/ location: maildir:/home/securitymailbox/Maildir:INDEX=~/Maildir/securitymailbox list: yes auth default: passdb: driver: pam userdb: driver: passwd -------------------------------------------------------------------------------- Thanks, Keith

2 1

[Dovecot] sieve filtering setup
by Jonathan Siegle 02 Aug '09

02 Aug '09

I'm looking at implementing sieve in my environment. Software is: dovecot-1.2-sieve revision 1022:3c9a22c28156 dovecot-1.2 revision 9269:a303bb82c1c9 AIX 5.3 with sendmail mta using prescribed deliver lda. I have a few questions. I'll have 110k sieve files(1 for each user). Does sieve read the file each time a new message is accepted by sendmail? Are there any measurements on cpu load for sieve filters? Thanks, Jonathan

3 6

[Dovecot] Managesieve configuration problem
by listacc＠gmx.de 02 Aug '09

02 Aug '09

Hello! I'm trying for a lot of time to make managesieve working with dovecot 1.1.17 and virtual users on openSuSE 11.1. I think I'm doing some misconfiguration, but I can't figure it out. Perhaps it's something with the paths to the sieve scripts? In dovecot.conf I find in the comments: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ protocol managesieve { #(...) # Specifies the location of the symlink pointing to the active script in # the sieve storage directory. This must match the SIEVE setting used by # deliver (refer to http://wiki.dovecot.org/LDA/Sieve#location for more # info). Variable substitution with % is recognized. # Take care: if a file in a maildir: begins with a '.', it is recognized # as a folder; so, avoid this. #sieve=~/.dovecot.sieve sieve = /drbd/mail/vmail/%d/%n/dovecot.sieve } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "This must match the SIEVE setting used by deliver", so I have to take a look to LDA section, no? But there I don't find any hint for sieve settings: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ protocol lda { # Address to use when sending rejection mails. postmaster_address = postmaster(a)mydomain.tld # Hostname to use in various parts of sent mails, eg. in Message-Id. # Default is the system's real hostname. #hostname = # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. mail_plugins = cmusieve quota mail_plugin_dir = /usr/lib64/dovecot/modules/lda # If user is over quota, return with temporary failure instead of # bouncing the mail. #quota_full_tempfail = no # Format to use for logging mail deliveries. You can use variables: # %$ - Delivery status message (e.g. "saved to INBOX") # %m - Message-ID # %s - Subject # %f - From address #deliver_log_format = msgid=%m: %$ # Binary to use for sending mails. sendmail_path = /usr/lib/sendmail # Human readable error message for rejection mails. Use can use variables: # %n = CRLF, %r = reason, %s = subject, %t = recipient rejection_reason = Your message to <%t> was automatically rejected:%n%r # UNIX socket path to master authentication server to find users. # auth_socket_path = /drbd/mail/var/run/dovecot/auth-master auth_socket_path = /var/run/dovecot/auth-master } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I tried to log in to managesieve manually with gnutls-cli, and that was successfull. I was able to authenticate. But when I try to put the example script from dovecot wiki (http://wiki.dovecot.org/ManageSieve/Troubleshooting) ~~~~~~~~~~~~~~~~~~~~~~~~~~~ PUTSCRIPT "hutsefluts" {6+} keep; ~~~~~~~~~~~~~~~~~~~~~~~~~~~ I get no ~~~~~~~~~~~~~~~~~~~~~~~~~ OK "Putscript completed." ~~~~~~~~~~~~~~~~~~~~~~~~~ there happens nothing, managesieve seems to wait for something else. When I look now into the directory where the script should be stored (the folder has been created automatically) I don't find any script file but a folder "tmp" that contains a plaintext file with the script commands inside, eg. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ hutsefluts-12345678.M033562P2271.imap.sieve ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ After disconnecting, this file disappears. In the dovecot.info log it looks like this: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ dovecot: Jul 30 14:51:56 Info: auth(default): master out: USER 16 test(a)mydomain.tld home=/drbd/mail/vmail/mydomain.tld/test mail=maildir:/drbd/mail/vmail/mydomain.tld/test uid=5001 gid=5001 quota_rule=*:storage=512000000B dovecot: Jul 30 14:51:56 Info: managesieve-login: Login: user=<test(a)mydomain.tld>, method=PLAIN, rip=192.168.200.39, lip=192.168.200.40, TLS dovecot: Jul 30 14:51:56 Info: MANAGESIEVE(test(a)mydomain.tld): Effective uid=5001, gid=5001, home=/drbd/mail/vmail/mydomain.tld/test dovecot: Jul 30 14:51:56 Info: MANAGESIEVE(test(a)mydomain.tld): sieve-storage: using active sieve script path: /drbd/mail/vmail/mydomain.tld/test/dovecot.sieve dovecot: Jul 30 14:51:56 Info: MANAGESIEVE(test(a)mydomain.tld): sieve-storage: using active sieve script path: /drbd/mail/vmail/mydomain.tld/test/dovecot.sieve dovecot: Jul 30 14:51:56 Info: MANAGESIEVE(test(a)mydomain.tld): sieve-storage: using sieve script storage directory: /drbd/mail/vmail/mydomain.tld/test/sieve dovecot: Jul 30 14:51:56 Info: MANAGESIEVE(test(a)mydomain.tld): sieve-storage: relative path to sieve storage in active link: sieve/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../vmail/mydomain.tld/test/dovecot.sieve is missing completely. Perhaps you can give me a small hint? And here is my "dovecot -n": ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # 1.1.7: /etc/dovecot/dovecot.conf Warning: fd limit 1024 is lower than what Dovecot can use under full load (more than 2256). Either grow the limit or change login_max_processes_count and max_mail_processes settings # OS: Linux 2.6.27.25-0.1-default x86_64 openSUSE 11.1 (x86_64) ext3 base_dir: /drbd/mail/var/run/dovecot/ log_path: /var/log/dovecot.err info_log_path: /var/log/dovecot.info protocols: imaps managesieve listen(default): * listen(imap): * listen(managesieve): 192.168.200.40:2000 ssl_listen(default): *:993 ssl_listen(imap): *:993 ssl_listen(managesieve): ssl_cert_file: /etc/ssl/certs/imap.crt ssl_key_file: /etc/ssl/private/imap.key verbose_ssl: yes login_dir: /drbd/mail/var/run/dovecot//login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login max_mail_processes: 2000 mail_max_userip_connections(default): 30 mail_max_userip_connections(imap): 30 mail_max_userip_connections(managesieve): 10 first_valid_uid: 5001 last_valid_uid: 5001 mail_location: maildir:/drbd/mail/vmail/%d/%n mail_debug: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib64/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib64/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib64/dovecot/modules/managesieve managesieve_implementation_string(default): dovecot managesieve_implementation_string(imap): dovecot managesieve_implementation_string(managesieve): Cyrus timsieved v2.2.13 sieve_storage(default): sieve_storage(imap): sieve_storage(managesieve): /drbd/mail/vmail/%d/%n/sieve sieve(default): sieve(imap): sieve(managesieve): /drbd/mail/vmail/%d/%n/dovecot.sieve auth default: mechanisms: plain login cram-md5 user: nobody verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: vmail plugin: quota: maildir ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ By the way, I'm quite amazed how fast dovecot is developed at the moment, and it makes lots of fun to see it growing!! kind regards, Andreas -- GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01

2 1

[Dovecot] imap error
by Jack Raats 02 Aug '09

02 Aug '09

This morning I tried to read my mail using squirrelmail. I cann't connect. I'll get the following error: Aug 2 07:51:44 hera dovecot: imap-login: Login: user=<jack>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Aug 2 07:51:44 hera dovecot: IMAP(jack): Disconnected: Logged out bytes=44/298 The pop3 is not affected. Can anyone give me a clue where to look for?? Thanks Jack

2 3

[Dovecot] Best way to get login protocol (pop3/imap) in post-login script
by Zhang Huangbin 02 Aug '09

02 Aug '09

Hi, all. I found doc here: http://wiki.dovecot.org/PostLoginScripting and use ${USER}, ${IP} to track last-login username and remote ip address, but how can i track the mail protocol it used? like pop3, pop3s, imap, imaps? Currently, i wrote shell script as post-login script, and use below command to get protocol: ---- $(basename ${MAIL_PLUGIN_DIR}) ---- But is it the best way to get it? Thanks very much. :) -- Best Regards. Zhang Huangbin - Open Source Mail Server Solution for Red Hat(R) Enterprise Linux, CentOS, Debian, Ubuntu: + http://code.google.com/p/iredmail/ + http://www.iredmail.org/forum/

1 0

[Dovecot] E-Mail Encryption
by Christian Felsing 01 Aug '09

01 Aug '09

Hello, I am new to Dovecot but installation was quite easy, so there is one more LDAP authenticated, Dovecot / Postfix mailbox online, but there is one question left: I would like to set up a configuration, which encrypts every user mail with a unique key. If user logs in, private key should be decrypted with user password and every mail user requests should be decrypted with users private key. If a mail comes in, it should be encrypted with users public key. That key pair should be used for that purpose only. Obviously a GnuPG plugin between deliver and rest of Dovecot is needed. best reagrds Christian

15 24

[Dovecot] Fw: Shared mailboxes and INBOX
by Keith Edmunds 01 Aug '09

01 Aug '09

Should users of a shared mailbox be able to see both their personal inbox and that of the shared mailbox? Thanks, Keith Begin forwarded message: Date: Wed, 29 Jul 2009 17:50:08 +0100 From: Keith Edmunds <kae(a)midnighthax.com> To: dovecot(a)dovecot.org Subject: [Dovecot] Shared mailboxes and INBOX I'm trying to implement a shared mailbox: in other words, we have a generic email address ("security@") which we want a number of users to be able to monitor. The problem I have is that users can see folders under that shared mailbox but can't see the INBOX. All the users in question have their own INBOX in their private namespace, so does this raise a conflict with monitoring another mailbox's INBOX? Configuration: -------------------------------------------------------------------------------- # dovecot -n # 1.2.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-686 i686 Debian 5.0.2 log_timestamp: %Y-%m-%d %H:%M:%S disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: public separator: / prefix: shared/ location: maildir:/home/publicfolders:INDEX=~/Maildir/public list: yes namespace: type: shared separator: / prefix: security/ location: maildir:/home/securitymailbox/Maildir:INDEX=~/Maildir/securitymailbox list: yes auth default: passdb: driver: pam userdb: driver: passwd -------------------------------------------------------------------------------- Thanks, Keith

1 0

[Dovecot] Solaris 10 dovecot-latest configure error
by Tomi Vainio 31 Jul '09

31 Jul '09

Hi, I've got latest source code from http://dovecot.org/nightly/dovecot-20090731.tar.gz It's a minor bug that mysql.h test fails because CFLAGS are missing from this test. Tomppa > checking for mysql_init in -lmysqlclient... yes > checking mysql.h usability... yes > checking mysql.h presence... no > configure: WARNING: mysql.h: accepted by the compiler, rejected by the preprocessor! > configure: WARNING: mysql.h: proceeding with the compiler's result > checking for mysql.h... yes > checking for mysql_ssl_set in -lmysqlclient... yes > configure:33185: checking mysql.h usability > configure:33197: cc -c -xO4 -I/usr/sfw/include/mysql -R/usr/sfw/lib:/usr/lib/sasl -L/usr/sfw/lib -L/usr/lib/sasl -I/usr/sfw/include conftest.c >&5 > configure:33203: $? = 0 > configure:33207: test -z > || test ! -s conftest.err > configure:33210: $? = 0 > configure:33213: test -s conftest.o > configure:33216: $? = 0 > configure:33226: result: yes > configure:33230: checking mysql.h presence > configure:33240: cc -E conftest.c > "conftest.c", line 127: cannot find include file: <mysql.h> > cc: acomp failed for conftest.c

4 4

[Dovecot] Clients and dovecot-uidlist
by Thomas Hummel 31 Jul '09

31 Jul '09

Hello, I'm trying to figure out what exactly (and why) are the consequences of a lost or removal of the dovecot-uidlist file on an IMAP client (Thunderbird for instance). I took for granted that it was that the client would download all messages again since it might be confused by some UID changes. But I don't really see why (on the IMAP protocol level) and I don't know how to reproduce it. My understanding is that . dovecot-uidlist is not recreated until some client selects the mailbox . the client does something like : x UID fetch 1:* (FLAGS) to begin with anyway. So I guess the problem does not occur when no new messages arrive on the mailbox since the same UIDs would be assigned to the same messages ? But why would that change ? In which situation ? But can you show me some IMAP protocol command exchange that would illustrate . when such a problem can occur . how the client would detect that there has been some UID corruption . how it would fix it Thanks -- Thomas Hummel

2 33

[Dovecot] sieve delivery to utf folders
by Nikita Koshikov 31 Jul '09

31 Jul '09

Hello list, Today, my users have noticed, that delivery to folders with non-english names is broken. For example, if I create russian directory, it correct encoded and display into mail-client program and my webmail: Encoded: Normal view .INBOX.&BEIENQRBBEI- русс This is part of sieve script, which routing delivery to russian folder. .... elsif allof (header :contains "Subject" "qwe") { fileinto "INBOX/&BEIENQRBBEI-"; } But, when actualy delivery take place, in logs I have Jul 30 17:13:49 deliver(koshikov.n(a)domain.com): Info: sieve: msgid=<4A71A9E6.5040301(a)domain.com>: stored mail into mailbox 'INBOX/&-BEIENQRBBEI- And folder .INBOX.&-BEIENQRBBEI- appears in users maildir. This folder can't be unencoded by mail-client program and user see exactly "&-BEIENQRBBEI-" under INBOX directory(also normaly encoded directory "&BEIENQRBBEI-" --> "русс" displays correct). Something breaks encoding and adds sing "-" to all words in utf encoded directory names. I can't tell exactly when this problem appear, but I remember that I have tested delivery to russian directories by sieve scripts and all worked fine. My current dovecot installation is 1.2.2, dovecot-sieve-0.1.9 and managesieve-0.11.7

4 6

Re: [Dovecot] whining
by A. van Harten 31 Jul '09

31 Jul '09

Be a man, Jim, and write this in public. [QUOTE] Jim Reid[/QUOTE] > On 31 Jul 2009, at 09:36, A. van Harten wrote: > >> Sorry, but the answers on this mail group are written with as few >> words as >> possible - if it was written in Finnish, I'd understand just as much >> as I >> do now. >> Googling on a Dovecot problems results always in www.dovecot.org or >> one of >> its child sites. Always. >> Googling on a Linux question results always in experts-exchange. >> Always. > > Clearly, dovecot is not for you. Now please go back to the linux world > you came from. You appear to be comfortable there. > > I am also disgusted and very annoyed with the tone of your recent > email: negative, childish, destructive and counter-productive. You did > not identify any particular problem, suggest other approaches or point > at areas where specific improvements could be made. You just whined > about the results of google searches. > -- Med venlig hilsen, Met vriendelijke groeten,

2 2

Re: [Dovecot] Several errors
by A. van Harten 31 Jul '09

31 Jul '09

Tried that, same result. dovecot: Jul 25 00:55:41 Info: Dovecot v1.0.7 starting up dovecot: Jul 25 00:55:42 Error: Temporary failure in creating login processes, slowing down for now dovecot: Jul 25 00:55:42 Error: imap-login: USER environment missing dovecot: Jul 25 00:55:42 Error: imap-login: USER environment missing dovecot: Jul 25 00:55:42 Info: Created login processes successfully, unstalling dovecot: Jul 25 00:55:42 Error: child 3850 (login) returned error 89 dovecot: Jul 25 00:55:42 Error: child 3851 (login) returned error 89 dovecot: Jul 25 00:55:42 Error: Temporary failure in creating login processes, slowing down for now dovecot: Jul 25 00:55:42 Error: imap-login: USER environment missing dovecot: Jul 25 00:55:42 Error: child 3852 (login) returned error 89 dovecot: Jul 25 00:55:42 Info: Created login processes successfully, unstalling [root@nestorix etc]# dovecot -n # 1.2.1: /usr/local/etc/dovecot.conf Warning: There is no way to login to this server: disable_plaintext_auth=yes, ssl=no, no non-plaintext auth mechanisms. Warning: There is no way to login to this server: disable_plaintext_auth=yes, ssl=no, no non-plaintext auth mechanisms. # OS: Linux 2.6.18-128.2.1.el5 i686 CentOS release 5.3 (Final) ext3 base_dir: /var/run/dovecot/ log_path: /var/log/dovecot info_log_path: /var/log/dovecot protocols: pop3 pop3s imap imaps ssl: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap login_executable(imap): /usr/libexec/dovecot/imap login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting: Havecom Mailserver ready. valid_chroot_dirs: /var/mail/vhosts mail_location: maildir:/var/mail/vhosts/%d/%n/ mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: executable: /usr/libexec/dovecot/dovecot-auth username_translation: "/$ verbose: yes passdb: driver: passwd-file args: /etc/dovecot/passwd userdb: driver: passwd-file args: /etc/dovecot/userdb socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix [root@nestorix etc]# service dovecot stop Stopping Dovecot Imap: [ OK ] [root@nestorix etc]# gedit /var/log/dovecot [root@nestorix etc]# service dovecot start Starting Dovecot Imap: [ OK ] [root@nestorix etc]# gedit /var/log/dovecot ^C [root@nestorix etc]# dovecot -n # 1.2.1: /usr/local/etc/dovecot.conf Warning: There is no way to login to this server: disable_plaintext_auth=yes, ssl=no, no non-plaintext auth mechanisms. Warning: There is no way to login to this server: disable_plaintext_auth=yes, ssl=no, no non-plaintext auth mechanisms. # OS: Linux 2.6.18-128.2.1.el5 i686 CentOS release 5.3 (Final) ext3 base_dir: /var/run/dovecot/ log_path: /var/log/dovecot info_log_path: /var/log/dovecot protocols: pop3 pop3s imap imaps ssl: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap login_executable(imap): /usr/libexec/dovecot/imap login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting: Havecom Mailserver ready. valid_chroot_dirs: /var/mail/vhosts mail_location: maildir:/var/mail/vhosts/%d/%n/ mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: executable: /usr/libexec/dovecot/dovecot-auth username_translation: "/$ verbose: yes passdb: driver: passwd-file args: /etc/dovecot/passwd userdb: driver: passwd-file args: /etc/dovecot/userdb socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix [root@nestorix etc]# Albert [QUOTE] Timo Sirainen[/QUOTE] > On Sat, 2009-07-25 at 00:07 +0200, FraNL wrote: >> Running OS: CentOS 5.3 (2.6.18-128.2.1.el5) >> >> 1. >> My Linux distribution comes with Dovecot 1.0.7. After trying to make it running, I encoutnered many problems. So I decided to upgrade to 1.2.1. When running dovecot -r from CLI, it returns with version 1.2.1. But at the top of the log file it says: Info: Dovecot v1.0.7 starting up >> >> So I am not sure which version I am running. > > It means you're using some weird mix of both. Get rid of all of Dovecot v1.0 binaries (rpm -e dovecot or something) and your problems should go away. > > -- Med venlig hilsen, Met vriendelijke groeten, -- Med venlig hilsen, Met vriendelijke groeten,

4 15

Re: [Dovecot] Several errors
by A. van Harten 31 Jul '09

31 Jul '09

[QUOTE] Charles Marcus[/QUOTE] > > Who says you have to install it? Almost all the fora which are speaking of setting up a mail server tell me to install Dovecot > And who is it that you think owes you 'descent support' for free? When and where did I spoke about FREE? I never said I didn't want to pay for it!!! Please don't think for me... > That said, the support on the dovecot list is the best I've seen, even > when people get attitudes (like yours)... Attitudes? Since when is a normal business inquiry not appropriate? > If you want to learn linux, and learn how to admin a mail server, you're > expected to do some leg work yourself... no one expects you to be a > guru, but a little googling on how to change ownership of files in linux > would most likely answer this particular question. Sorry, but the answers on this mail group are written with as few words as possible - if it was written in Finnish, I'd understand just as much as I do now. Googling on a Dovecot problems results always in www.dovecot.org or one of its child sites. Always. Googling on a Linux question results always in experts-exchange. Always. > > Also, the attititude will most likely get surprising little response. If > you want to get help from someone for free, it helps to ask nicely. I don't agree. I know the way of asking isn't the most nice way - and I also apologise to them, who assisted me! But who cares if I agree with someone, who didn't assist me at all, but who only is capable of writing negatively about me? > Thats said, I wouldn't be surprised if Timo responds nicely anyway... > I've seen him respond to much worse emails than yours, and yours was > pretty bad... Pretty bad? You misunderstood me, my friend. Try to read reasonable next time. That helps! > > -- > > Best regards, > > Charles > -- Med venlig hilsen, Met vriendelijke groeten,

1 0

[Dovecot] Limiting user access
by Darvin Denmian 30 Jul '09

30 Jul '09

Hello, Is there a way to restrict clients access, for example: user1(a)domain.com -> only access pop3 user2(a)domain.com -> can access pop3 and imap in Dovecot? Thanks !!!

2 2

Re: [Dovecot] POSIX stupidity
by Timo Sirainen 30 Jul '09

30 Jul '09

On Thu, 2009-07-30 at 20:21 +0200, Remi Gacogne wrote: > Le jeudi 30 juillet 2009, Timo Sirainen a écrit : > > > > What the hell were POSIX people thinking?? This is the first syscall > > > I've seen that behaves like this, and apparently without any good > > > reason! Wonder how many other new system calls there are like this, that > > > I haven't noticed yet.. > > > > Looks like all posix_*() syscalls do that. Wonder if there are more. > > Looks like too many people were incorrectly using errno, especially in multi- > threaded context. > > From http://www.unix.org/whitepapers/reentrant.html : > > "In addition, all POSIX.1c functions avoid using errno and, instead, return > the error number directly as the function return value, with a return value of > zero indicating that no error was detected. This strategy is, in fact, being > followed on a POSIX-wide basis for all new functions. " But that doesn't solve anything, because old functions' API can't be changed. The only thing this change did was to make it more difficult for programmers to remember how functions' error handling should be done. In both APIs the success is indicated by returning 0, which makes it especially difficult to notice when it's being used wrong. If they really had to change this, it would have been much better to both set errno and return -error, that way it would have allowed also 2/3 of the old style error checks: if (posix_fallocate(..) < 0) perror() // works if (posix_fallocate(..) != 0) perror() // works if (posix_fallocate(..) == -1) perror() // doesn't work Now none of them work. I did also a quick google code search for posix_fallocate and found several other programs that handle the error wrong. And I'm sure it's only going to grow. Oh well, maybe some day gcc and libc add some features to catch at least the < 0 and == -1 usage (which would already work if posix_fallocate() had been specified to return unsigned int, not int).

1 0

[Dovecot] AIX and posix_fallocate
by Ralf Becker 30 Jul '09

30 Jul '09

Hi, AIX's implementation of posix_fallocate is a little bit, let me say, peculiar. Attached is a patch to "fix" (=work around) this. Without you'll see this in the logs: Jul 28 01:17:41 trevi mail:err|error dovecot: IMAP(beckerr): posix_fallocate() failed: File exists Jul 28 01:17:41 trevi mail:err|error dovecot: IMAP(beckerr): file_set_size() failed with mbox file /u/f0/rzuser/beckerr/Mail/Ham: File exists Funny, isn't it? This is what it should be: Jul 28 01:17:41 trevi mail:err|error dovecot: IMAP(beckerr): posix_fallocate() failed: Operation not supported on socket Jul 28 01:17:41 trevi mail:err|error dovecot: IMAP(beckerr): file_set_size() failed with mbox file /u/f0/rzuser/beckerr/Mail/Ham: Operation not supported on socket The problem is, that errno is not correcly set, when posix_fallocate returns EOPNOTSUPP (="Operation not supported on socket"). In this case the return code has to be checked rather than errno. When patched dovecot handles err==EOPNOTSUPP the same way like errno==EINVAL on Solaris. A note for all AIX Admins: Without APAR IZ48778: POSIX_FALLOCATE() FAILS WITH ERROR-25(ENOTTY) resp. IZ46961: POSIX_FALLOCATE() FAILS WITH ERROR-25(ENOTTY) APPLIES TO AIX 5300-06 you don't even get EOPNOTSUPP: posix_fallocate fails with NOTTY. So you have to install one of this fixes to make the patch work. Ralf -- ______________________________________________________________________ Dipl.-Inform. (FH) Ralf Becker Rechenzentrum (r/ft) der FH Trier (Network|Mail|Web|Firewall) University of applied sciences Administrator Schneidershof, D-54293 Trier Mail: beckerr(a)fh-trier.de Fon: +49 651 8103 499 Web: http://www.fh-trier.de/~beckerr Fax: +49 651 8103 214 PubKey: http://www.fh-trier.de/~beckerr Crypto: GnuPG, S/MIME ______________________________________________________________________ Wenn Gott gewollt haette, dass E-Mail in HTML geschrieben wuerden, endeten Gebete traditionell mit </amen>. (Tom Listen) --- ./lib/file-set-size.c.org 2009-07-06 12:56:17.000000000 +0200 +++ ./lib/file-set-size.c 2009-07-06 12:54:40.000000000 +0200 @@ -43,9 +43,15 @@ #ifdef HAVE_POSIX_FALLOCATE if (posix_fallocate_supported) { - if (posix_fallocate(fd, st.st_size, size - st.st_size) == 0) + int err; + if ((err = posix_fallocate(fd, st.st_size, size - st.st_size)) == 0) return 0; + if (err == EOPNOTSUPP /* AIX */ ) { + /* Ignore this error silently. + You have to test err, because errno is not + correcly set on some versions of AIX */ + } else if (errno != EINVAL /* Solaris */) { if (!ENOSPACE(errno)) i_error("posix_fallocate() failed: %m");

4 4

[Dovecot] lock files causing time outs with Thunderbird
by CJ Keist 30 Jul '09

30 Jul '09

I have dovecot 1.1.16 running on Solaris 10. We are seeing problem with lock files taking forever to be removed after opening a email folder like Trash with several thousand messages in them. We use mbox format. All users inbox's are local to the mail server, and all other users mail folders are stored on a separate file server mounted via NFS. I see no problems with the NFS mounts. cd'ing into the mount points, listing files and viewing files a perform with now visible delays. Is there something I can do in the config file to speed things up? Here is the config file: # 1.1.16: /userM/mail-services/dovecot/etc/dovecot.conf Warning: fd limit 256 is lower than what Dovecot can use under full load (more than 3072). Either grow the limit or change login_max_processes_count and max_mail_processes settings # OS: SunOS 5.10 sun4v base_dir: /userM/mail-services/dovecot/var/run/dovecot/ protocols: imap imaps pop3 pop3s ssl_cert_file: /userM/mail-services/dovecot/etc/ssl/dovecot.pem ssl_key_file: /userM/mail-services/dovecot/etc/ssl/privkey.pem ssl_parameters_regenerate: 0 ssl_cipher_list: MEDIUM:!LOW disable_plaintext_auth: no login_dir: /userM/mail-services/dovecot/var/run/dovecot/login login_executable(default): /userM/mail-services/dovecot/libexec/dovecot/imap-login login_executable(imap): /userM/mail-services/dovecot/libexec/dovecot/imap-login login_executable(pop3): /userM/mail-services/dovecot/libexec/dovecot/pop3-login login_greeting: Cyrus ready. login_max_processes_count: 1024 max_mail_processes: 1024 mail_location: mbox:~/:INBOX=/userM/mail/%u mail_debug: yes mmap_disable: yes mail_nfs_index: yes mbox_write_locks: fcntl dotlock mbox_dotlock_change_timeout: 60 mail_executable(default): /userM/mail-services/dovecot/libexec/dovecot/imap mail_executable(imap): /userM/mail-services/dovecot/libexec/dovecot/imap mail_executable(pop3): /userM/mail-services/dovecot/libexec/dovecot/pop3 mail_plugins(default): convert mail_plugins(imap): convert mail_plugins(pop3): mail_plugin_dir(default): /userM/mail-services/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /userM/mail-services/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /userM/mail-services/dovecot/lib/dovecot/pop3 auth default: mechanisms: plain login verbose: yes debug: yes worker_max_count: 1024 worker_max_request_count: 2000 passdb: driver: pam passdb: driver: passwd args: blocking=yes userdb: driver: passwd args: blocking=yes socket: type: listen client: path: /var/lib/postfix/private/auth mode: 438 user: postfix group: postfix master: path: /userM/mail-services/dovecot/var/run/dovecot//auth-master mode: 384 plugin: convert_mail: Maildir:~/Maildir:INBOX=/userM/mail/%u -- C. J. Keist Email: cj.keist(a)colostate.edu UNIX/Network Manager Phone: 970-491-0630 Engineering Network Services Fax: 970-491-5569 College of Engineering, CSU Ft. Collins, CO 80523-1301 All I want is a chance to prove 'Money can't buy happiness'

2 7

[Dovecot] imap, locks, and dovecot
by Mauricio Tavares 30 Jul '09

30 Jul '09

Let's say I have two computers -- a desktop and a laptop -- setup to check email on my postfix/dovecot/mailscanner box by using imap. Now, both machines use thunderbird and have a filter in that mail client to move emails that have a certain to: address (an alias, like support(a)domain.com) to a mail directory. The desktop is setup to check for mail every minute while the laptop initially is told to do the same. So, I send an email to the said address. dovecot (1.1.7) puts it in the inbox. thunderbird in one of those machines sees it and moves it to the, say, support folder. Then, another copy of the same mail is created and placed in the same folder. I then begin increasing the time the laptop waits before checking mails. Up to 5 minutes I am still having the double email issue, but if I the laptop to wait 10 minutes I only have one copy of the said email. That makes me think both clients are seeing the same email and moving it at the same time. I do not know the imap commands being used but it sure seems that there is not some kind of locking system for the mail files (I use maildir) to make sure only one program is accessing the said email. Am I correct? Is there a way around that?

1 0

[Dovecot] Filtering with Public Namespaces and Sieve Plugin
by Thomas Leuxner 30 Jul '09

30 Jul '09

Hi, after upgrading to Dovecot 1.2x including the rewritten Sieve plugin replacing 'cmusieve', messages which have formerly been filed to a "Public/Mailing-List" maildir are no longer filtered correctly. The sieve script itself is included in the user's personal-script. The messages are dropped to the INBOX rather than the "Public Namespace Maildir". Log's don't give a hint (at least to me). The documentation says the personal script should automatically fetch the include, and compile it in the users home... Debug log excerpt: ----------------- >2009-07-30 10:44:09 deliver(xxxx): Info: Namespace: type=public, prefix=Public/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=no >2009-07-30 10:44:09 deliver(xxxx): Info: maildir: data=/var/vmail/public:CONTROL=~/maildir/public:INDEX=~/maildir/public >2009-07-30 10:44:09 deliver(xxxx): Info: maildir++: root=/var/vmail/public, index=/var/vmail/leuxner.net/tlx/maildir/public, control=/var/vmail/leuxner.net/tlx/maildir/public, inbox= >2009-07-30 10:44:09 deliver(xxxx): Info: sieve: using sieve path for user's script: /var/vmail/leuxner.net/tlx/.dovecot.sieve >2009-07-30 10:44:09 deliver(xxxx): Info: sieve: opening script /var/vmail/leuxner.net/tlx/.dovecot.sieve >2009-07-30 10:44:09 deliver(xxxx): Info: sieve: executing compiled script /var/vmail/leuxner.net/tlx/.dovecot.sieve >2009-07-30 10:44:09 deliver(xxxx): Info: Namespace : Using permissions from /var/vmail/leuxner.net/tlx/maildir: mode=0750 gid=-1 >2009-07-30 10:44:09 deliver(xxxx): Info: sieve: msgid=<20090730084326.GP1111(a)jeeves.jpl.local>: stored mail into mailbox 'INBOX' Personal ".dovecot.sieve" script: ------------------------------ require ["include","copy","fileinto","vacation"]; include :global "global.sieve"; -- snip --- Global script "global.sieve" excerpt: ------------------------------------ require ["copy","fileinto"]; #Newsletters / Mailinglists if allof (address :is ["To","CC"] "dovecot(a)dovecot.org", header :contains "List-Id" "dovecot.dovecot.org") { fileinto "Public/Mailing-Lists.Dovecot"; } elsif allof (address :is "To" "dovecot-news(a)dovecot.org", header :contains "List-Id" "dovecot-news.dovecot.org") { fileinto :copy "Public/Newsletters.Dovecot"; } Thanks Thomas $ dovecot -n # 1.2.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-amd64 x86_64 Debian 5.0.2 log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot-info.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap listen: 188.138.0.199:143 ssl_cert_file: /etc/ssl/certs/spectre_leuxner_net_2009.crt ssl_key_file: /etc/ssl/private/spectre_leuxner_net_2009.key login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail mail_location: maildir:~/maildir mail_debug: yes maildir_copy_preserve_filename: yes mail_plugins: acl quota imap_quota fts fts_squat namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: public separator: / prefix: Public/ location: maildir:/var/vmail/public:CONTROL=~/maildir/public:INDEX=~/maildir/public list: yes auth default: passdb: driver: passwd-file args: username_format=%u /var/vmail/%d/etc/passwd userdb: driver: passwd-file args: username_format=%u /var/vmail/%d/etc/passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: acl: vfile:/var/vmail/%d/etc/acls:cache_secs=300 quota: maildir:User quota quota_rule: *:storage=1GB quota_rule2: Trash:storage=10%% fts: squat fts_squat: partial=4 full=10 sieve_global_dir: /var/vmail/%d/etc/sieve-scripts

2 2

Re: [Dovecot] AutoCreate per Domain
by Robert Schetterer 30 Jul '09

30 Jul '09

Darvin Denmian schrieb: > Thanks Robert, > > i will try this solution !!! maybe i can be done via a global sieve rule too ask the sieve gurus if that might work > > On Thu, Jul 30, 2009 at 11:44 AM, Robert > Schetterer<robert(a)schetterer.org> wrote: >> Darvin Denmian schrieb: >>> Any idea? >>> >>> On Thu, Jul 30, 2009 at 2:30 AM, Darvin Denmian<darvin.denmian(a)gmail.com> wrote: >>>> Hello, >>>> >>>> is there a way to configure plugin "autocreate" per domain? Like: >>>> >>>> For domain xwz.com i want to autocreate folders: Models and Clients >>>> For domain yxw.com i want to autocreate folders: Adm and Tech >>>> >>>> Thanks. >>>> >> i dont think this would be a good idea, cause there are so much >> layouts and setups thinkable >> so in fact it might be difficult to implement this >> for all thinkable cases in the plugin, in my maildrop setup >> i do some testing about folders exist, and if not create it, >> but deliver does not exec scripts right now i think >> >> but perhaps you can exec test folder scripts at login stage >> >> http://wiki.dovecot.org/PostLoginScripting >> >> that should do the job >> >> -- >> Best Regards >> >> MfG Robert Schetterer >> >> Germany/Munich/Bavaria >> -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

1 0

[Dovecot] sieve redirect action
by Nikita Koshikov 30 Jul '09

30 Jul '09

Hello Stephan, First of all, thank you for dovecot-sieve implementation. I see that you are adding X-Sieve header to all outgoing e-mail in cmd-redirect.c /* Prepend sieve version header (should not affect signatures) */ rfc2822_header_field_write(f, "X-Sieve", SIEVE_IMPLEMENTATION); How do you look at adding one more header, for example X-Sieve-Forward-From: Now, when redirect action is in use - mail forwards using sendmail command line interface. The problem that there is no suitable way to know which user's script has generate redirect. Received: header may contain envelope receiver but this is valid if only 1 "rcpt to:" command was specified on SMTP session. This invokes problem when forwarding mail to non-local domains, breaking such things like SPF. I'd like to setup SRS for fixing this, but I don't know sender("sieve local user") mail. Adding one header with valid local user e-mail address will fix this. Google add 2 headers for this - X-Forwarded-To: and X-Forwarded-For: . What do you think about this ?

3 2

[Dovecot] Missing return-path on vacation messages
by Stephen Vaughan 30 Jul '09

30 Jul '09

Hi, I can see this has been discussed previously, was just wondering if it's been fixed in v1.1.x? -- Best Regards, Stephen

3 11

Re: [Dovecot] Some people asked me lately about how professional Dovecot is.
by Stewart Dean 30 Jul '09

30 Jul '09

I purely love that kind of crap. As if presentations meant anything, as if there aren't all kinds of scholarly work about theoretical perfect world algorithms and conceptual systems that will never be implemented and are as practical and effective as wings on a pig. Please. I'm reminded of the story about how, during the American Civil War, when the North had finally, after years of ignominious defeats, gotten a general would could fight and win a battle, General Grant. A fussy old lady approached President Lincoln and complained loudly that Grant was a drunk. Lincoln blinked at the woman, then said, "Ma'am, if you'll be so kind as to find out what kind of whiskey Grant drinks, I'll send a case of it to all the other generals." Dovecot Works. That's all anyone needs to know. Plus it has a towering wizard of a developer and an avid, engaged and endlessly helpful community. -- ==== Once upon a time, the Internet was a friendly, neighbors-helping-neighbors small town, and no one locked their doors. Now it's like an apartment in Bed-Stuy: you need three heavy duty pick-proof locks, one of those braces that goes from the lock to the floor, and bars on the windows.... ==== Stewart Dean, Unix System Admin, Bard College, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

6 5

[Dovecot] STARTTLS problem
by Рачков Сергей 30 Jul '09

30 Jul '09

Hi I have a problem with STARTTLS, with imaps all ok. I have tried to connect to server with different clients (thunderbird, the bat, mulberry) and had same result. Thunderbird log for example: 0[284708]: 25c0e08:192.168.4.200:NA:SetupWithUrl: clearing IMAP_CONNECTION_IS_OPEN 1920[25c77c8]: ImapThreadMainLoop entering [this=25c0e08] 1920[25c77c8]: 25c0e08:192.168.4.200:NA:ProcessCurrentURL: entering 1920[25c77c8]: 25c0e08:192.168.4.200:NA:ProcessCurrentURL:imap://test%40my%2Elocal@192.168.4.200:143/select%3E/INBOX: = currentUrl 1920[25c77c8]: ReadNextLine [stream=25c8020 nb=210 needmore=0] 1920[25c77c8]: 25c0e08:192.168.4.200:NA:CreateNewLineFromSocket: * OK [CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS UIDPLUS LIST-EXTENDED I18NLEVEL=1 STARTTLS AUTH=PLAIN AUTH=LOGIN] Dovecot ready. 1920[25c77c8]: 25c0e08:192.168.4.200:NA:SendData: 1 capability 1920[25c77c8]: ReadNextLine [stream=25c8020 nb=190 needmore=0] 1920[25c77c8]: 25c0e08:192.168.4.200:NA:CreateNewLineFromSocket: * CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS UIDPLUS LIST-EXTENDED I18NLEVEL=1 STARTTLS AUTH=PLAIN AUTH=LOGIN 1920[25c77c8]: ReadNextLine [stream=25c8020 nb=28 needmore=0] 1920[25c77c8]: 25c0e08:192.168.4.200:NA:CreateNewLineFromSocket: 1 OK Capability completed. 1920[25c77c8]: 25c0e08:192.168.4.200:NA:SendData: 2 STARTTLS 1920[25c77c8]: ReadNextLine [stream=25c8020 nb=33 needmore=0] 1920[25c77c8]: 25c0e08:192.168.4.200:NA:CreateNewLineFromSocket: 2 OK Begin TLS negotiation now. 1920[25c77c8]: 25c0e08:192.168.4.200:NA:SendData: 3 capability my comment - at this place the process is waiting 1920[25c77c8]: ReadNextLine [stream=25c8020 nb=0 needmore=1] 1920[25c77c8]: 25c0e08:192.168.4.200:NA:CreateNewLineFromSocket: clearing IMAP_CONNECTION_IS_OPEN - rv = 804b0014 1920[25c77c8]: 25c0e08:192.168.4.200:NA:TellThreadToDie: close socket connection 1920[25c77c8]: 25c0e08:192.168.4.200:NA:CreateNewLineFromSocket: (null) 1920[25c77c8]: 25c0e08:192.168.4.200:NA:ProcessCurrentURL: aborting queued urls 1920[25c77c8]: ImapThreadMainLoop leaving [this=25c0e08] At same time dovecot log: Jul 29 18:33:08 freebsd dovecot: auth(default): new auth connection: pid=3339 Jul 29 18:33:34 freebsd dovecot: imap-login: Disconnected (no auth attempts): rip=192.168.4.100, lip=192.168.4.200, TLS handshaking: Disconnected What does it mean, i don't know, because if I try to connect with gnutls-cli it works perfectly. freebsd# dovecot -n # 1.1.16: /usr/local/etc/dovecot.conf # OS: FreeBSD 7.2-RELEASE i386 ufs syslog_facility: local0 protocols: imap imaps pop3 pop3s ssl_key_file: /etc/ssl/keys/dovecot.pem disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no verbose_proctitle: yes first_valid_uid: 1000 first_valid_gid: 1000 mail_privileged_group: mail mail_uid: 4738 mail_gid: 4738 mail_location: maildir:/var/mail/vmail/%d/%n mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): acl mail_plugins(imap): acl mail_plugins(pop3): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: public separator: / prefix: public/ location: maildir:/var/mail/vmail/%d/public:INDEX=/var/mail/vmail/%d/%n/public/index:CONTROL=/var/mail/vmail/%d/%n/public/control list: yes subscriptions: yes auth default: mechanisms: plain login username_format: %Lu verbose: yes debug: yes passdb: driver: passwd-file args: /usr/local/etc/passwd.dovecot userdb: driver: passwd-file args: /usr/local/etc/passwd.dovecot socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 plugin: acl: vfile any ideas ? Regards, Sergey

4 6

[Dovecot] problem with disable_plaintext_auth
by Olivier Nicole 30 Jul '09

30 Jul '09

Hi, I am using dovecot with postfix for authentication. Everything (TLS/SSL, authentication) is working fine, except that when I set: disable_plaintext_auth = yes I still can authenticate with plain text on a no TLS/SSL session: 20 mail2.cs.ait.ac.th ESMTP Postfix (2.6.2) EHLO [192.41.170.57] 250-mail2.cs.ait.ac.th 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH PLAIN LOGIN 250-AUTH=PLAIN LOGIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN AUTH PLAIN XXXX 235 2.7.0 Authentication successful My dovecot configuration is: # 1.1.16: /usr/local/etc/dovecot.conf # OS: FreeBSD 7.2-RELEASE-p2 amd64 base_dir: /var/run/dovecot/ protocols: none ssl_listen: * ssl_ca_file: /usr/local/ssl/ca/ait-itserv.crt ssl_cert_file: /usr/local/ssl/crt/mail2.cs.ait.ac.th.crt ssl_key_file: /usr/local/ssl/key/mail2.cs.ait.ac.th.key ssl_cipher_list: ALL:!LOW:!SSLv2 login_dir: /var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login login_chroot: no login_greeting_capability: yes verbose_proctitle: yes first_valid_uid: 1000 first_valid_gid: 1000 mail_privileged_group: mail mail_location: mbox:~/mail/:INBOX=/var/mail/%u imap_client_workarounds: delay-newmail netscape-eoh tb-extra-mailbox-sep auth default: mechanisms: plain login username_format: %Ln verbose: yes debug: yes passdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf passdb: driver: passwd args: blocking=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 Any help is welcome. Best regards, Olivier

2 3

[Dovecot] sieve 0.1.8 raw backtrace
by jsechser＠gmx.ch 30 Jul '09

30 Jul '09

hi, I had two problems with deliver / sieve. First one is not reproducible anymore. Im using debian unstable (amd64), often dist-upgraded, with some experimental stuff too (wine i think). The first basically triggered a backtrace when confronted an email with spammassassins report headers prepended. (user_prefs: report_safe 0) However i dont have that backtrace anymore, sorry. The second poped up only later as i began to investigate more the first, a few days later. Now my entire sieve script seemed broken suddenly. After some time i narrowed it down to one offending line: >require ["fileinto","regex"]; > >if address :regex "to" ["m-a-test(a)test\\.ch","m-a-members(a)test\\.ch", \ >"m-a-region(a)test\\.ch","m-a-sig(a)test\\.ch"] { > fileinto "Test"; > stop; >} if i remove even one of the regex tests, then this script will not make deliver or sieve_test go panic. here the backtrace: 2009-07-29 18:15:37 deliver(xxx): Panic: pool_data_stack_realloc(): stack frame changed 2009-07-29 18:15:37 deliver(xxx): Error: Raw backtrace: /usr/lib/dovecot/deliver [0x496bc2] -> /usr/lib/dovecot/deliver(default_fatal_handler+0x34) [0x496cc4] -> /usr/lib/dovecot/deliver [0x496346] -> /usr/lib/dovecot/deliver [0x4a18fb] -> /usr/lib/dovecot/deliver [0x494185] -> /usr/lib/dovecot/deliver(buffer_write_zero+0xe5) [0x494a55] -> /usr/lib/dovecot/modules/lda/lib90_sieve_plugin.so [0x7f444ca98ff2] -> /usr/lib/dovecot/modules/lda/lib90_sieve_plugin.so(sieve_match_value+0xb0) [0x7f444ca8ea10] -> /usr/lib/dovecot/modules/lda/lib90_sieve_plugin.so(sieve_address_match+0xe3) [0x7f444ca8e5f3] -> /usr/lib/dovecot/modules/lda/lib90_sieve_plugin.so [0x7f444ca9291b] -> /usr/lib/dovecot/modules/lda/lib90_sieve_plugin.so(sieve_interpreter_continue+0x97) [0x7f444ca89307] -> /usr/lib/dovecot/modules/lda/lib90_sieve_plugin.so(sieve_interpreter_run+0x48) [0x7f444ca894f8] -> /usr/lib/dovecot/modules/lda/lib90_sieve_plugin.so [0x7f444ca96716] -> /usr/lib/dovecot/modules/lda/lib90_sieve_plugin.so(sieve_execute+0x3d) [0x7f444ca9698d] -> /usr/lib/dovecot/modules/lda/lib90_sieve_plugin.so [0x7f444ca7dc8a] -> /usr/lib/dovecot/deliver(main+0xf5e) [0x41d0fe] -> /lib/libc.so.6(__libc_start_main+0xe6) [0x7f444ceea5c6] -> /usr/lib/dovecot/deliver [0x41b029] I hope this helps cheers

2 2

[Dovecot] problems compiling dovecot-1.2.2 on solaris 10
by Jason Welsh 30 Jul '09

30 Jul '09

if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /scratch/jawelsh/src/dovecot-1.2.2/src *** Error code 1 The following command caused the error: failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='src doc'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /scratch/jawelsh/src/dovecot-1.2.2 *** Error code 1 make: Fatal error: Command failed for target `all' [house-7]$ this is with gcc-4.1.1 any ideas? Jason

2 2

[Dovecot] Unable to (un)subscribe mbox with AIX, NFS and netapp filer
by Ralf Becker 29 Jul '09

29 Jul '09

Hi Timo, dovecot 1.2.0 is great! Faster and more stable on mboxes that 1.1.x by far... good job :-) Today I stumbled over a strange problem when I tried to subscribe an existing Mailbox (mbox), which doesn't work. Thunderbird IMAP log -------------------- 9932[4124558]: 40f3498:imap.fh-trier.de:A:SendData: 11 subscribe "Mail/Archiv/1998" 9932[4124558]: ReadNextLine [stream=403f280 nb=108 needmore=0] 9932[4124558]: 40f3498:imap.fh-trier.de:A:CreateNewLineFromSocket: 11 NO [SERVERBUG] Internal error occurred. Refer to server log for more information. [2009-07-06 08:14:32] Server log ---------- Jul 6 08:14:32 trevi mail:info dovecot: IMAP(beckerr): Namespace Mail/: Using permissions from /u/f0/rzuser/beckerr/Mail: mode=0700 gid=-1 Jul 6 08:14:32 trevi mail:err|error dovecot: IMAP(beckerr): fchown(/u/f0/rzuser/beckerr/Mail/.subscriptions.lock, -1, -1) failed: Invalid argument Jul 6 08:14:32 trevi mail:err|error dovecot: IMAP(beckerr): file_dotlock_open() failed with subscription file /u/f0/rzuser/beckerr/Mail/.subscriptions: Invalid argument The error just appears on NFS mounted shared and I'm not sure if AIX or netapp is the cause. So to determine the real problem is not easy, but to fix it is: While uid and gid are both -1 the call could be suppressed, because nothing is really changed: --- ./lib/file-dotlock.c.org 2009-07-06 09:25:14.000000000 +0200 +++ ./lib/file-dotlock.c 2009-07-06 09:24:48.000000000 +0200 @@ -780,7 +780,7 @@ fd = file_dotlock_open(set, path, flags, &dotlock); umask(old_mask); - if (fd != -1) { + if (fd != -1 && (uid != -1 || gid != -1)) { if (fchown(fd, uid, gid) < 0) { if (errno == EPERM && uid == (uid_t)-1) { i_error("%s", eperm_error_get_chgrp("fchown", Ralf -- ______________________________________________________________________ Dipl.-Inform. (FH) Ralf Becker Rechenzentrum (r/ft) der FH Trier (Network|Mail|Web|Firewall) University of applied sciences Administrator Schneidershof, D-54293 Trier Mail: beckerr(a)fh-trier.de Fon: +49 651 8103 499 Web: http://www.fh-trier.de/~beckerr Fax: +49 651 8103 214 PubKey: http://www.fh-trier.de/~beckerr Crypto: GnuPG, S/MIME ______________________________________________________________________ Wenn Gott gewollt haette, dass E-Mail in HTML geschrieben wuerden, endeten Gebete traditionell mit </amen>. (Tom Listen)

4 11

[Dovecot] v1.2.2 released
by Timo Sirainen 29 Jul '09

29 Jul '09

http://dovecot.org/releases/1.2/dovecot-1.2.2.tar.gz http://dovecot.org/releases/1.2/dovecot-1.2.2.tar.gz.sig Found and fixes several v1.2-specific bugs. Hopefully it's now stable for most people's usage. * GSSAPI: More changes to authentication. Hopefully good now. * lazy_expunge plugin: Drop \Deleted flag when moving message. + dovecot -n/-a now outputs also lda settings. + dovecot.conf !include now supports globs (e.g. !include /etc/dovecot/*.conf). Based on patch by Thomas Guthmann. + acl: Support spaces in user/group identifiers. + shared mailboxes: If only %%n is specified in prefix, default to current user's domain. - Dovecot master process could hang if it received signals too rapidly. - Fixed "corrupted index cache file" errors (and perhaps others) caused by e.g. IMAP's FETCH BODY[] command. - IMAP: When QRESYNC is enabled, don't crash when a new mail is received while IDLEing. - IMAP: FETCH X-* parameters weren't working. - Maildir++ quota: Quota was sometimes updated wrong when it was being recalculated. - Searching quoted-printable message body internally converted "_" characters to spaces and didn't match search keys with "_". - Messages in year's first/last day may have had broken timezones with OSes not having struct tm->tm_gmtoff (e.g. Solaris). - virtual plugin: If another session adds a new mailbox to index, don't crash.

7 12

[Dovecot] dovecot-1.2.2+sieve 0.1.9: sieve issues with (global?) includes
by Tom Hendrikx 29 Jul '09

29 Jul '09

Hi, After upgrading from dovecot 1.1 to dovecot 1.2.2 and the new sieve implementation (0.1.9), I'm having some strange problems. I'm including some general purpose scripts into my user script from sieve_global_dir. After some tests it seems that ths scripts get executed at random: sometimes the mail gets stored in the correct dir, and sometimes it goes to inbox. This also happens while using the same compiled .svbin file. Another indication that something is wrong with the compiled .svbin is output of sieved (see below). Running sieved on the compiled test{1,2,3}.svbin files gives regular output. Any ideas what could be causing this? user script: =============================== require ["include"]; include :global "test1.sieve"; include :global "test2.sieve"; include :global "test3.sieve"; keep; =============================== /etc/dovecot/sieve/test1.sieve: =============================== require ["fileinto"]; if header :contains "Subject" "test1" { fileinto "sieve_test"; stop; } =============================== /etc/dovecot/sieve/test2.sieve: =============================== require ["fileinto"]; if header :contains "Subject" "test2" { fileinto "sieve_test"; stop; } =============================== /etc/dovecot/sieve/test3.sieve: =============================== require ["fileinto"]; if header :contains "Subject" "test3" { fileinto "sieve_test"; stop; } =============================== Log output with mail_debug=yes: =============================== # test mail for test1.sieve Jul 28 23:20:27 meredith-mail dovecot: deliver(tomhendr): Loading modules from directory: /usr/lib/dovecot/lda Jul 28 23:20:27 meredith-mail dovecot: deliver(tomhendr): Module loaded: /usr/lib/dovecot/lda/lib90_sieve_plugin.so Jul 28 23:20:27 meredith-mail dovecot: deliver(tomhendr): maildir: data=/var/spool/mail/tomhendr/Maildir Jul 28 23:20:27 meredith-mail dovecot: deliver(tomhendr): maildir++: root=/var/spool/mail/tomhendr/Maildir, index=, control=, inbox=/var/spool/mail/tomhendr/Maildir Jul 28 23:20:27 meredith-mail dovecot: deliver(tomhendr): sieve: using sieve path for user's script: /home/tomhendr/.default.sieve Jul 28 23:20:27 meredith-mail dovecot: deliver(tomhendr): sieve: opening script /home/tomhendr/.default.sieve Jul 28 23:20:27 meredith-mail dovecot: deliver(tomhendr): sieve: executing compiled script /home/tomhendr/.default.sieve Jul 28 23:20:27 meredith-mail dovecot: deliver(tomhendr): sieve: msgid=<20090728212027.02EEBD002(a)smtp.whyscream.net>: stored mail into mailbox 'sieve_test' # test mail for test2.sieve Jul 28 23:20:35 meredith-mail dovecot: deliver(tomhendr): Loading modules from directory: /usr/lib/dovecot/lda Jul 28 23:20:35 meredith-mail dovecot: deliver(tomhendr): Module loaded: /usr/lib/dovecot/lda/lib90_sieve_plugin.so Jul 28 23:20:35 meredith-mail dovecot: deliver(tomhendr): maildir: data=/var/spool/mail/tomhendr/Maildir Jul 28 23:20:35 meredith-mail dovecot: deliver(tomhendr): maildir++: root=/var/spool/mail/tomhendr/Maildir, index=, control=, inbox=/var/spool/mail/tomhendr/Maildir Jul 28 23:20:35 meredith-mail dovecot: deliver(tomhendr): sieve: using sieve path for user's script: /home/tomhendr/.default.sieve Jul 28 23:20:35 meredith-mail dovecot: deliver(tomhendr): sieve: opening script /home/tomhendr/.default.sieve Jul 28 23:20:35 meredith-mail dovecot: deliver(tomhendr): sieve: executing compiled script /home/tomhendr/.default.sieve Jul 28 23:20:35 meredith-mail dovecot: deliver(tomhendr): Namespace : Using permissions from /var/spool/mail/tomhendr/Maildir: mode=0700 gid=-1 Jul 28 23:20:35 meredith-mail dovecot: deliver(tomhendr): sieve: msgid=<20090728212035.5F2F8D003(a)smtp.whyscream.net>: stored mail into mailbox 'INBOX' # test with 2 mails for test2 in a row Jul 28 23:40:50 meredith-mail dovecot: deliver(tomhendr): Loading modules from directory: /usr/lib/dovecot/lda Jul 28 23:40:50 meredith-mail dovecot: deliver(tomhendr): Module loaded: /usr/lib/dovecot/lda/lib90_sieve_plugin.so Jul 28 23:40:50 meredith-mail dovecot: deliver(tomhendr): maildir: data=/var/spool/mail/tomhendr/Maildir Jul 28 23:40:50 meredith-mail dovecot: deliver(tomhendr): maildir++: root=/var/spool/mail/tomhendr/Maildir, index=, control=, inbox=/var/spool/mail/tomhendr/Maildir Jul 28 23:40:50 meredith-mail dovecot: deliver(tomhendr): sieve: using sieve path for user's script: /home/tomhendr/.default.sieve Jul 28 23:40:50 meredith-mail dovecot: deliver(tomhendr): sieve: opening script /home/tomhendr/.default.sieve Jul 28 23:40:50 meredith-mail dovecot: deliver(tomhendr): sieve: executing compiled script /home/tomhendr/.default.sieve Jul 28 23:40:51 meredith-mail dovecot: deliver(tomhendr): sieve: msgid=<20090728214050.C2983D002(a)smtp.whyscream.net>: stored mail into mailbox 'sieve_test' Jul 28 23:40:57 meredith-mail dovecot: deliver(tomhendr): Loading modules from directory: /usr/lib/dovecot/lda Jul 28 23:40:57 meredith-mail dovecot: deliver(tomhendr): Module loaded: /usr/lib/dovecot/lda/lib90_sieve_plugin.so Jul 28 23:40:57 meredith-mail dovecot: deliver(tomhendr): maildir: data=/var/spool/mail/tomhendr/Maildir Jul 28 23:40:57 meredith-mail dovecot: deliver(tomhendr): maildir++: root=/var/spool/mail/tomhendr/Maildir, index=, control=, inbox=/var/spool/mail/tomhendr/Maildir Jul 28 23:40:57 meredith-mail dovecot: deliver(tomhendr): sieve: using sieve path for user's script: /home/tomhendr/.default.sieve Jul 28 23:40:57 meredith-mail dovecot: deliver(tomhendr): sieve: opening script /home/tomhendr/.default.sieve Jul 28 23:40:57 meredith-mail dovecot: deliver(tomhendr): sieve: executing compiled script /home/tomhendr/.default.sieve Jul 28 23:40:57 meredith-mail dovecot: deliver(tomhendr): Namespace : Using permissions from /var/spool/mail/tomhendr/Maildir: mode=0700 gid=-1 Jul 28 23:40:57 meredith-mail dovecot: deliver(tomhendr): sieve: msgid=<20090728214057.43048D002(a)smtp.whyscream.net>: stored mail into mailbox 'INBOX' =============================== Output of 'sieved /home/tomhendr/.default.svbin =============================== * Required extensions: 0: include (16) 1: fileinto (5) Panic: file ext-include-variables.c: line 133 (ext_include_variables_dump): assertion failed: (global_vars != NULL) Error: Raw backtrace: sieved [0xa7fbfe10] -> sieved(default_fatal_handler+0x57) [0xa7fbfe97] -> sieved [0xa7fc006e] -> sieved [0xa7f7384c] -> sieved(ext_include_binary_dump+0x48) [0xa7f531c8] -> sieved(sieve_binary_dumper_run+0x119) [0xa7f671a9] -> sieved(sieve_dump+0x42) [0xa7f4bf82] -> sieved(sieve_tool_dump_binary_to+0x6f) [0xa7f7b77f] -> sieved(main+0x174) [0xa7f42564] -> /lib/libc.so.6(__libc_start_main+0xe2) [0xa7dce712] -> sieved [0xa7f422b1] Aborted =============================== -- Regards, Tom

2 4

[Dovecot] Random flags appearing on messages
by Michael M. Slusarz 29 Jul '09

29 Jul '09

Not reproducible every time, but every so often, after viewing an unseen message, I am seeing the first non-system flag set on the message without an intervening STORE call. Here's an example: 2 EXAMINE "XXX" (QRESYNC (1165391112 78 12160:12162,12168:12171,12173,12178,12183,12191,12360,12431,12560,12762,12765,13037,13089,13094,13196,13457,13460,13495,13548,13549,13561,13590,13597,13598)) * FLAGS (\Answered \Flagged \Deleted \Seen \Draft impflag0 impflag1) * OK [PERMANENTFLAGS ()] Read-only mailbox. ... 7 UID FETCH 13608 (ENVELOPE FLAGS RFC822.SIZE BODY.PEEK[HEADER.FIELDS (LIST-POST X-PRIORITY)]) * 30 FETCH (UID 13608 FLAGS (\Recent) ... On the next access: 2 SELECT "XXX" (QRESYNC (1165391112 79 12160:12162,12168:12171,12173,12178,12183,12191,12360,12431,12560,12762,12765,13037,13089,13094,13196,13457,13460,13495,13548,13549,13561,13590,13597,13598,13608)) * FLAGS (\Answered \Flagged \Deleted \Seen \Draft impflag0 impflag1) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft impflag0 impflag1 \*)] Flags permitted. ... 3 UID FETCH 13608 (BODY[HEADER]) * 30 FETCH (UID 13608 FLAGS (\Seen \Recent impflag0) BODY[HEADER] {2529} ... As can be seen, impflag0 has been magically set somehow. Stranger still, dovecot won't let you unset the flag (this might have something to do with QRESYNC since, if I run this command without the UNCHANGEDSINCE parameter, it will unset the flag): 4 UID STORE 13608 (UNCHANGEDSINCE 82) -FLAGS (impflag0) 4 OK Store completed. FYI, I am using dovecot 1.2.1 on archlinux (they haven't upgraded the package to 1.2.2 yet, but I didn't see anything in the 1.2.2 release notes that leads me to believe this has been fixed). michael

2 4

[Dovecot] authn_name and authz_name differ: not supported
by Nikolay Shopik 29 Jul '09

29 Jul '09

Hello, I'm trying to authenticate using GSSAPI, but getting this in dovecot.log "authn_name and authz_name differ: not supported". What is actually trying to say me? I've remeber once encounter this problem but it get away silently. I'm using Mozilla Thunderbird 3 beta 3 and Dovecot 1.0.15

1 1

[Dovecot] High Availability strategies
by Joseba Torre 29 Jul '09

29 Jul '09

Hi, we have a medium setup (8000 pop and imap users using almost every available client, 800GB of stored mails using maildir on a Celerra NFS server, with index files on local disks, and procmail for local delivery), being served by a Dell PowerEdge 2850 (2GB RAM and dual P4 Xeon 3,2GHz). Our current not-so-high availability setup is based on a similar server with the same setup and a easy but manual process to switch from one server to another. We are thinking about setting up some kind of serious high availability, but for every strategy we think about some problems appear, and I'd like to hear your opinions about them: - The recommended setup, with each user being sent always to the same server, is not possible because our load balancers (Cisco Catalyst 6000) can't do that. - We could put both servers behind the load balancer, and keep local index files on each server. Usually the same ip we'll be redirected to the same server, so few problems will arise. When a user is sent to a new server, index will be rebuilt so performance will be bad but we should not expect other problems, right? - We could also put the index files on a nfs share. No problems, but pretty bad performance. - We could also get more ram for the servers and keep indices in memory. How can we compare these solutions? Apart from performance, are other problems expected? Using deliver instead of procmail could improve performance? - We've also thought about some more or less weird setups, like setting up a GFS filesystem for the index files, or setting up a proxy on every server which redirect users to their fixed server, but they seem too complex for few advantages. Any recommendations? How are you doing this? -- Joseba Torre. Vicegerencia de TICs, área de Explotación

6 10

[Dovecot] Stuck with dovecot-sieve and horde-ingo ...
by Stefan G. Weichinger 29 Jul '09

29 Jul '09

Hello, dovecot-users ... as you may read at http://lists.horde.org/archives/horde/Week-of-Mon-20090706/037786.html I am stuck getting dovecot-sieve working with the ingo-application of the horde-framework. To me it seems as if ingo doesn't even trigger any request/command to managesieve ... I set "mail_debug=yes" in the managesieve-section of dovecot.conf but don't see any errors there, in fact not even loglines in /var/log/mail ... Any way to increase the loglevel here? Apache also doesn't log any errors. I am able to contact managesieve via telnet or even thunderbird's sieve-plugin. I edited the relevant backends.php over and over again, substituting, starting from scratch etc ... Could someone maybe give me some hint on how to proceed? I don't know if the problem is with dovecot or ingo or the underlying php/perl/something-stuff ... I currently use these releases: dovecot-1.2-sieve-0.1.8 dovecot-1.2-managesieve-0.11.7 dovecot-1.2.1 The server is some older Suse 10.1 ... php5-5.1.2-29.45, apache2-2.2.0-21.7, Horde Groupware Webmail Edition 1.2 # pear5 list Installed packages, channel pear.php.net: ========================================= Package Version State Archive_Tar 1.3.1 stable Console_Getopt 1.2 stable DB 1.7.12 stable Date 1.4.7 stable Log 1.9.11 stable Mail 1.1.14 stable Net_Sieve 1.1.6 stable Net_Socket 1.0.9 stable PEAR 1.4.6 stable XML_RPC 1.5.1 stable I would appreciate any input on this as this issue now already is unsolved for weeks now. And as always that is one of the features the customer wants first ;-) Aside from this dovecot is working great here, thanks ! Stefan

2 4

[Dovecot] dovecot 1.2.1 and sieve-0.9.1
by John Killian 29 Jul '09

29 Jul '09

Hi all, ok, can someone tell me which header fields that the "Sender" function in sieve looks at ??? I've created a sieve rule to move a mail to a directory that looks like this : # rule:[File Message] if anyof (address :contains "Sender" "Dude") { fileinto "TestFolder"; } And the emails headers look like this : Received: (qmail 5811 invoked by uid 100); 28 Jul 2009 22:33:56 -0000 X-Sieve: Dovecot Sieve 0.1.9 Delivered-To: xxxxxx-xxxxxx(a)xxxxxx.com Received: (qmail 5581 invoked from network); 28 Jul 2009 22:33:53 -0000 Received: from unknown (HELO mx1.securemailscan.com) (209.132.1.198) by mda1.scaledsystems.com with SMTP; 28 Jul 2009 22:33:53 -0000 X-Envelope-From: xxxxx(a)yahoo.com X-Envelope-To: xxxxxx(a)xxxxxx.com Received: From web35801.mail.mud.yahoo.com (66.163.179.170) by mx1.securemailscan.com (MAILFOUNDRY) id uh1v8HvGEd6coQAw for xxxxxx(a)xxxxxx.com; Tue, 28 Jul 2009 22:33:52 -0000 (GMT) Received: (qmail 76116 invoked by uid 60001); 28 Jul 2009 22:33:52 -0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.com; s=s1024; t=1248820432; bh=bMaME6CgqoU7EGtJwkX2i9rjL4ONpP79bbfuft4bEok=; h=Message-ID:X-YMail-OSG:Received:X-RocketSRV:X-Mailer:Date:From:Reply-To:Subject:To:MIME-Version:Content-Type; b=as+pQdsUMeD/yiXAxceO3lYtDm/vCgjqDH1AS1OsfMfQITJV7YMRJSqBst1m4mHIgC0xyShetRIo6o3FEeLxDDOHYKUhy3V31MrS+0d7B+us4Nrjft7OZu3zVPIS87fDWoF6hM9dc9eVXTu4Kuj0a1bul0XwKIRwXqn+AfXepYg= DomainKey-Signature:a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:X-YMail-OSG:Received:X-RocketSRV:X-Mailer:Date:From:Reply-To:Subject:To:MIME-Version:Content-Type; b=kHyfgMDzLWxu70JYhQk6KYifrtYSi7jV4T7UqqQ6XfSN+WZeTRlZ4fK6R+nb1ykwTjmp2pROJAPYgHooRPs3MaYMtx54f0+7IL8HjP0c2wqiYIy++6pFzc+mk8j+72OJMBcxMhDTPtV/i52Uu0bDEl5+DbU6QXrQhYbak6BdzLM=; Message-ID: <213398.63258.qm(a)web35801.mail.mud.yahoo.com> X-YMail-OSG: nmd_HZwVM1lT6TNyXWr2RcbN36VCejKyF4bZMN8urulX03szfpVuJD36F652_focw.1y1PwSPvcfGlWkoBsq5kEb9H_R.HWV.kcpvFe1pZGC4oWcj6Cc4uO737j.52s0kwXmru.WZEdJi..tsbkjg.8f3y_Lc4wJRFORqhFHjMoKG17xhVM8_z1olhpu_FtyrOVvTuoqaapAk3ioUOGTyEYp52oHRPQAx9TuiKojStPmtmq0AkGjDMybhQeciqJSvFJcrF6KqdL5wEjBX4G1bGGXGD61RYzUaJNGMX8FQ.tJqPEKSI1vlBU- Received: from [76.176.154.181] by web35801.mail.mud.yahoo.com via HTTP; Tue, 28 Jul 2009 15:33:52 PDT X-RocketSRV: showStationery=1248820330364@dclient.mail.yahoo.com,1248820330363@dclient.mail.yahoo.com,1248820330362@dclient.mail.yahoo.com X-Mailer: YahooMailRC/1358.22 YahooMailWebService/0.7.289.15 Date: Tue, 28 Jul 2009 15:33:52 -0700 (PDT) From: Dude Crush <xxxxxxx(a)yahoo.com> Reply-To: Dude Crush <xxxxxxx(a)yahoo.com> Subject: test from dude 2 To: xxxxxxxx(a)xxxxxxxx.com MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="0-948431439-1248820432=:63258" But when the mail is delivered, it goes into the INBOX, and the dovecot message in the log file looks like this : Jul 28 15:33:56 deliver(xxxxxxx(a)xxxxxx.com): Info: sieve: msgid=<213398.63258.qm(a)web35801.mail.mud.yahoo.com>: stored mail into mailbox 'INBOX' So, I'm a little bi stumped as to why it wouldn't pick up "Dude" in any of the sender addresses... I can get it to work for the address by using # rule:[File Message] if anyof ( envelope :contains "From" "yahoo") { fileinto "TestFolder"; } But isnt' it supposed to be able to deal with the Sender name??? Thanks, Tim.

4 3

[Dovecot] Expunged emails getting automatically deleted
by Romer Ventura 28 Jul '09

28 Jul '09

Hello, So i had this email in my inbox, i moved it to Folder1/tickets/ folder, then i decided to move the same email back to my inbox and when i went to the inbox it wasnt there nor in Folder1/tickets/ folder... I opened a SSH session to the mail server and went to /srv/mail/ vmail/DOMAIN.COM/rventura/Maildir There i did "ll expunged/.INBOX/cur" and it showed me 300+ emails i then did "cat expunged/.INBOX/cur/the email i needed" and it showed me the email contents and since it was the one i needed i then try to do "mv expunged/.INBOX/cur/email-id" and it returned: mv: cannot stat `expunged/.INBOX/cur/ 1248796845.M207411P29102.housigma20,W=6193:2,STab': No such file or directory I do another "ll expunged/.INBOX/cur/" returns total 0..... WTF happened to all my items..? before: # df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda2 38G 30G 6.9G 82% / udev 1.1G 72K 1.1G 1% /dev /dev/xvdb1 50G 40G 7.7G 84% /srv/mail after: # df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda2 38G 30G 6.9G 81% / udev 1.1G 72K 1.1G 1% /dev /dev/xvdb1 50G 40G 7.8G 84% /srv/mail Notice /dev/xvdb1 Avail...? # dovecot -n # 1.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.16.60-0.21-xenpae i686 SUSE Linux Enterprise Server 10 (i586) login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_uid: vmail mail_gid: vmail mail_location: maildir:~/Maildir/ mail_plugins: lazy_expunge imap_client_workarounds: delay-newmail outlook-idle netscape-eoh namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: private separator: / prefix: .EXPUNGED/ location: maildir:/srv/mail/vmail/%Ud/%Ln/Maildir/expunged list: yes subscriptions: yes namespace: type: private separator: / prefix: .DELETED/ location: maildir:/srv/mail/vmail/%Ud/%Ln/Maildir/deleted list: yes subscriptions: yes namespace: type: private separator: / prefix: .DELETED/.EXPUNGED/ location: maildir:/srv/mail/vmail/%Ud/%Ln/Maildir/deleted/expunged list: yes subscriptions: yes auth default: mechanisms: plain login passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: lazy_expunge: .EXPUNGED/ .DELETED/ .DELETED/.EXPUNGED/

2 3

[Dovecot] Cannot get plaintext auth working on IMAP or POP
by crunchbytes 28 Jul '09

28 Jul '09

Server: Ubuntu 9.04 desktop edition Dovecot 1.1.11 Issue: I have set dovecot.conf with: disable_plaintext_auth = no but everytime I have a client (Windows Live Mail, ubuntu evolution) connect from the Internet, I have the following type of message: Plaintext authentication disallowed on non-secure (SSL/TLS) connections. in my mail.log, I have: Jul 28 15:09:43 "name" dovecot: imap-login: Disconnected (tried to use disabled plaintext auth): rip=x.x.x.x, lip=x.x.x.x Unfortunately I need plaintext auth IMAP. If I VPN in and use IMAPS, it works a treat - but I can't always do this, hence needing plain old IMAP. Any ideas anyone? What am I missing? Cheers, Richard -- View this message in context: http://www.nabble.com/Cannot-get-plaintext-auth-working-on-IMAP-or-POP-tp24… Sent from the Dovecot mailing list archive at Nabble.com.

2 2

[Dovecot] namespaces / list=no crash
by Jernej Porenta 28 Jul '09

28 Jul '09

Hey everyone, I am trying to migrate old UW-IMAP setup to dovecot 1.2.2 using namespaces as recommended for UW-IMAP backwards compatibility: http://wiki.dovecot.org/Namespaces I am trying to use these settings: mail_location = mbox:~/:INBOX=~/.mailbox # default namespace namespace private { separator = / prefix = inbox = yes } # for backwards compatibility: namespace private { separator = / prefix = mail/ hidden = yes list = no # for v1.1+ subscriptions = no } With upper settings, dovecot crashes upon login. (GDB trace is here: http://www2.arnes.si/~krklubsls13/dovecot-gdb.txt) If I change "list = no" to list = yes|children, everything is working fine. This settings were working fine with dovecot 1.1, so I don't know what is the deal... dovecot -n : http://www2.arnes.si/~krklubsls13/dovecot-conf.txt thanks in advance, regards Jernej

2 1

Re: [Dovecot] virtual plugin question
by Timo Sirainen 28 Jul '09

28 Jul '09

On Wed, 2009-07-22 at 21:54 +0300, Nikita Koshikov wrote: > > You can check if symbols are stripped with "file": > > > > /usr/local/libexec/dovecot/imap: ELF 32-bit LSB executable, Intel 80386, > > version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux > > 2.6.15, not stripped> > > Yes, you right, file echo's stripped. > > I'm using gentoo and its package manager - emerge. It compiles binaries for system from sources using ebuilds. I attach full compile log, can you tell me where stripping appear? There's no -g parameter given to gcc. The emerge overrides CFLAGS by adding -march=i686 etc. stuff in there, which also removes -g parameter. Try to figure out some way to add it back.

2 3

[Dovecot] Gentoo overlay?
by Charles Marcus 28 Jul '09

28 Jul '09

Does anyone know of a decent gentoo overlay that keeps dovecot+ reasonably up to date? Thanks, -- Best regards, Charles

6 15

[Dovecot] Dovecot broken with newer OpenSSL
by Brad 28 Jul '09

28 Jul '09

After updating my system from OpenSSL 0.9.8j to 0.9.8k Dovecot has stopped functioning properly with TLS sessions. The version of Dovecot does not seem to matter as I tried 1.1.11 - 1.1.14. Other programs using SSL/TLS such as Postfix and lightty still work fine when built with the newer release of OpenSSL. The IMAP client doesn't matter. For the time being I have gone back to .13 linked against older OpenSSL. In the logs I see messages like the following... dovecot: Apr 16 23:12:18 Info: imap-login: Disconnected (no auth attempts): rip=2001:470:b01e:3:216:41ff:fe17:6933, lip=2001:470:1d:8c::2, TLS handshaking: Disconnected -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

5 16

[Dovecot] Dovecot 1.2.2
by Guy 28 Jul '09

28 Jul '09

Hi, I've just tried upgrading from 1.1.8 to 1.2.2. As soon as the new version was started up the number of imap/pop3 processes began to climb to 800+, where I normally have about 300 or so connections at any given time. The load on the server also climbed to 150+. I've reverted back to 1.1.18, which is running just fine, but is there anything I can do to help trace what was causing the problem? Unfortunately I don't have a clue where to start. Thanks Guy -- Don't just do something...sit there!

3 2

[Dovecot] folder in dovecot
by Diego Roversi 27 Jul '09

27 Jul '09

Hello, I'm quite new to dovecot, and I have some questions about folders. At the moment I've a script that use fetchmail + procmail to get mail from the isp, and save the mail in different folder. The idea is to save mail from different mailing list in different folder. Now I've installed dovecot so i can read mail from different computers, and i want to export all the folders. I start with a simple configuration: root@debian:/home/diego# dovecot -n # 1.1.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.30-rc8 armv5tel Ubuntu 9.04 log_timestamp: %Y-%m-%d %H:%M:%S disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail mail_location: maildir:~/Mail/inbox mail_debug: yes namespace: type: private separator: / location: maildir:~/Mail/inbox inbox: yes list: yes subscriptions: yes namespace: type: private separator: / prefix: openmoko/ location: maildir:~/Mail/openmoko list: yes subscriptions: yes auth default: passdb: driver: passwd-file args: /etc/passwd.dovecot userdb: driver: passwd I use icedove (thunderbird) to connect to the dovecot server and I see the two folder. But openmoko one looks empty, even if there are more then 10k messages. Without namespaces and setting mail_location pointing to the openmoko folder works, i see the messages of openmoko folder as inbox in icedove. What's wrong? Do you have any suggestion? Thanks in advance, Diego Roversi.

2 2

[Dovecot] v1.1.18 released
by Timo Sirainen 27 Jul '09

27 Jul '09

http://dovecot.org/releases/1.1/dovecot-1.1.18.tar.gz http://dovecot.org/releases/1.1/dovecot-1.1.18.tar.gz.sig A few more fixes to v1.1 series. It probably won't have many released left. + dovecot -n/-a now outputs also lda settings. - Maildir++ quota: Quota was sometimes updated wrong when it was being recalculated. - Searching quoted-printable message body internally converted "_" characters to spaces and didn't match search keys with "_". - Messages in year's first/last day may have had broken timezones with OSes not having struct tm->tm_gmtoff (e.g. Solaris).

2 1