- dovecot - dovecot.org

[Dovecot] namespaces at v1.0.15
by Evaggelos Balaskas 04 Aug '08

04 Aug '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, i need to create a public maildir folder for virtual users so i did this: dovecot-1.0.15: namespace public { prefix = public/ separator = / location = maildir:/var/mail/shared:INDEX=/var/mail/shared/%u/index/:CONTROL=/var/mail/shared/%u/control/ } namespace private { separator = / prefix = inbox = yes } umask = 007 and everything works fine, but ... when one user reads an email from the public folder then the status (flag read) changes to all users. How i can fix this? How every virtual user (same uid.gid) can have its own index (perhaps?) Evaggelos Balaskas - Unix System Engineer Informatics Engineer Technological Education http://ebalaskas.gr/wk/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFIku4ZWIK+Pe9twhoRAokDAJ9u2/SjCqgabHvJFlTXlDART6+sngCghNA/ Ufl8U5GQ0mS3tVUU8idtNwY= =BUGu -----END PGP SIGNATURE-----

3 3

[Dovecot] 1.1.2 segfaults when using passdb passwd and md5 mechanism
by Miguel Filho 04 Aug '08

04 Aug '08

Setting passdb to passwd and enabling cram-md5 or digest-md5 makes dovecot crash. The documentation says that I can use md5 with passwd. I had to use strace to figure it, because dovecot segfaults and doesn't log the error. Using CenOS 5.2 x86_64 Regards, Miguel # dovecot -n # 1.1.2: /etc/dovecot.conf listen: 127.0.0.1 login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no mail_max_userip_connections(default): 5 mail_max_userip_connections(imap): 5 mail_max_userip_connections(pop3): 10 verbose_proctitle: yes first_valid_uid: 100 mail_debug: yes mail_executable: /mail/bin/resolv_mailbox.sh mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 auth default: mechanisms: plain login gssapi digest-md5 passdb: driver: passwd args: blocking=yes userdb: driver: passwd args: blocking=yes Backtrace: #0 0x0000000000410337 in hash_lookup (table=0x0, key=0xa85) at hash.c:159 node = <value optimized out> #1 0x0000000000405dae in log_it (log_io=0x1736ee00, line=0x1736f922 "DIGEST-MD5 mechanism can't be supported with given passdbs", continues=false) at log.c:128 process = <value optimized out> log_type = LOG_TYPE_FATAL #2 0x0000000000405e48 in log_write_pending (log_io=0x1736ee00) at log.c:51 _data_stack_cur_id = 3 line = 0x1736f920 "\001FDIGEST-MD5 mechanism can't be supported with given passdbs" #3 0x00000000004060e8 in log_read (log_io=0x1736ee00) at log.c:176 data = <value optimized out> line = <value optimized out> size = 0 ret = <value optimized out> #4 0x0000000000406188 in log_deinit () at log.c:316 next = (struct log_io *) 0xa85 #5 0x000000000040335d in auth_process_destroy (p=0x1736ee60) at auth-process.c:345 iter = <value optimized out> key = (void *) 0x6 value = <value optimized out> pos = <value optimized out> #6 0x00000000004034f9 in auth_process_input (process=0x1736ee60) at auth-process.c:266 line = <value optimized out> #7 0x0000000000412df8 in io_loop_handler_run (ioloop=<value optimized out>) at ioloop-epoll.c:201 ctx = <value optimized out> event = (const struct epoll_event *) 0x1736ef0c list = (struct io_list *) 0x17370aa0 io = (struct io_file *) 0x17370a60 tv = {tv_sec = 0, tv_usec = 970535} events_count = <value optimized out> t_id = 2 msecs = <value optimized out> ret = 3 i = 1 call = <value optimized out> #8 0x0000000000411fad in io_loop_run (ioloop=0x1736eab0) at ioloop.c:308 No locals. #9 0x0000000000409f4f in main (argc=<value optimized out>, argv=<value optimized out>) at main.c:558 _data_stack_cur_id = 0 ---Type <return> to continue, or q <return> to quit--- exec_protocol = 0x0 exec_args = (const char **) 0x0 foreground = <value optimized out> ask_key_pass = false log_error = false dump_config = false dump_config_nondefaults = false i = <value optimized out> #10 0x00002b11b72cc8b4 in __libc_start_main () from /lib64/libc.so.6 No symbol table info available. #11 0x0000000000402eb9 in _start () No symbol table info available. -- http://osysadmin.blogspot.com

2 1

[Dovecot] Dovecot doesn't read users and passwords from config files
by Marco Fioretti 04 Aug '08

04 Aug '08

Greetings, I am setting up Dovecot 1.0.15 on my home Fedora Core 8 pc ONLY to access my mail archives across several mail clients. No access from the internet is possible or needed here. I cannot log in with any client, the login always fails. The reason, as I understand, is that when dovecot starts it doesn't read any user name from the userdb file, so when I try to login it doesn't recognize my name and so doesn't even try to verify the password: maillog excerpt: Aug 3 00:06:11 polaris dovecot: Dovecot v1.0.15 starting up Aug 3 00:06:11 polaris dovecot: auth(default): passwd-file /etc/local_dovecot_passwords: Read 0 users Aug 3 00:06:11 polaris dovecot: auth(default): passwd-file /etc/local_dovecot_users: Read 0 users Aug 3 00:06:12 polaris dovecot: auth(default): new auth connection: pid=5150 Aug 3 00:06:12 polaris dovecot: auth(default): new auth connection: pid=5148 Aug 3 00:06:12 polaris dovecot: auth(default): new auth connection: pid=5149 Aug 3 00:06:26 polaris dovecot: auth(default): client in: AUTH#0111#011PLAIN#011service=IMAP#011secured#011lip=127.0.0.1#011rip=127.0.0.1#011resp=AG1hcmNvAGdpZ2V0dG8= Aug 3 00:06:26 polaris dovecot: auth(default): passwd-file(marco,127.0.0.1): lookup: user=marco file=/etc/local_dovecot_passwords Aug 3 00:06:26 polaris dovecot: auth(default): passwd-file(marco,127.0.0.1): unknown user Aug 3 00:06:27 polaris dovecot: auth(default): client out: FAIL#0111#011user=marco Aug 3 00:06:27 polaris dovecot: imap-login: Disconnected: user=<marco>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured the dovecot.conf file, purged by comments, is below. What am I missing? TIA, Marco ############################################################## protocols = imap listen = localhost:143 mail_location = maildir:/home/marco/.MAIL/home_imap/ protocol imap { } protocol pop3 { } protocol lda { postmaster_address = postmaster(a)example.com } auth_debug = yes auth_debug_passwords = yes auth default { mechanisms = plain login passdb passwd-file { args = /etc/local_dovecot_passwords } userdb passwd-file { args = /etc/local_dovecot_users } user = root } dict { } plugin { } ################################################### the local_dovecot_passwords and local_dovecot_users files are identical, and have permission 644: marco:{PLAIN}thepassword:500:500::/home/marco/.MAIL/home_imap/ -- Reality is for those who lack imagination

2 5

[Dovecot] Server power loss and "Dovecot is already running with PID xxx"
by Pekka Savola 04 Aug '08

04 Aug '08

Hi, I'm running Dovecot 1.0.7 (with various patches) on CentOS 5.2. The server has suffered a couple of power loss events. Dovecot is run as a standalone server. The problem is that dovecot refuses to start up at boot because the PID file from before the power loss is left behind. The message is as follows: $ /sbin/service dovecot start Starting Dovecot Imap: Error: Dovecot is already running with PID 10825 (read from /var/run/dovecot/master.pid) Fatal: Invalid configuration in /etc/dovecot.conf [FAILED] (Note: there is nothing wrong in the configuration file so the error message is somewhat misleading.) I looked at the release notes of 1.0.xx releases and they didn't mention this. Is this already a known problem? Should the start-up logic be made more robust (e.g. check whether a process corresponding to the PID actually exists)? -- Pekka Savola "You each name yourselves king, yet the Netcore Oy kingdom bleeds." Systems. Networks. Security. -- George R.R. Martin: A Clash of Kings

4 6

[Dovecot] 1.1.2: imap crash with SIGSEGV
by Ralf Hildebrandt 04 Aug '08

04 Aug '08

GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu"... Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.7.so...done. done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.7.so...done. done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.7.so...done. done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /usr/local/lib/dovecot/imap/lib10_quota_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib10_quota_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib11_imap_quota_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib11_imap_quota_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib11_trash_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib11_trash_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_fts_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_fts_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_mail_log_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_mail_log_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib21_fts_squat_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib21_fts_squat_plugin.so Core was generated by `/usr/local/libexec/dovecot/imap'. Program terminated with signal 11, Segmentation fault. [New process 23474] #0 mail_transaction_log_file_lock (file=0x0) at mail-transaction-log-file.c:257 257 if (file->locked) #0 mail_transaction_log_file_lock (file=0x0) at mail-transaction-log-file.c:257 #1 0x080ba2fd in mail_transaction_log_lock_head (log=0x91cfd68) at mail-transaction-log.c:419 #2 0x080ba36d in mail_transaction_log_sync_lock (log=0x91cfd68, file_seq_r=0xbff348a4, file_offset_r=0xbff34880) at mail-transaction-log.c:451 #3 0x080c44bb in mail_index_fsck (index=0x91cf828) at mail-index-fsck.c:424 #4 0x080b0296 in mail_index_map (index=0x91cf828, type=MAIL_INDEX_SYNC_HANDLER_HEAD) at mail-index-map.c:888 #5 0x080acde3 in mail_index_try_open (index=0x91cf828) at mail-index.c:290 #6 0x080ad0a7 in mail_index_open (index=0x91cf828, flags=49, lock_method=FILE_LOCK_METHOD_FCNTL) at mail-index.c:338 #7 0x080a1112 in index_storage_mailbox_open (ibox=0x91d02b0) at index-storage.c:383 #8 0x0807094b in maildir_open (storage=0x91bacc0, name=0x91bf6ee "Drafts", flags=0) at maildir-storage.c:448 #9 0x08070ab4 in maildir_mailbox_open (_storage=0x91bacc0, name=0x91bf6ee "Drafts", input=0x0, flags=0) at maildir-storage.c:512 #10 0xb7ea61ca in mail_log_mailbox_open (storage=0x91bacc0, name=0x91bf6ee "Drafts", input=0x0, flags=0) at mail-log-plugin.c:450 #11 0xb7eb761a in quota_mailbox_open (storage=0x91bacc0, name=0x91bf6ee "Drafts", input=0x0, flags=0) at quota-storage.c:366 #12 0x080a51d9 in mailbox_open (storage=0x91bacc0, name=0x91bf6ee "Drafts", input=0x0, flags=0) at mail-storage.c:459 #13 0x08060c89 in cmd_select_full (cmd=0x91bb5f0, readonly=false) at cmd-select.c:32 #14 0x08060e69 in cmd_select (cmd=0x91bb5f0) at cmd-select.c:87 #15 0x0806271c in client_command_input (cmd=0x91bb5f0) at client.c:580 #16 0x080627b3 in client_command_input (cmd=0x91bb5f0) at client.c:629 #17 0x08062d6d in client_handle_input (client=<value optimized out>) at client.c:670 #18 0x080631ee in client_input (client=0x91bb3a8) at client.c:725 #19 0x080dd730 in io_loop_handler_run (ioloop=0x91b79b0) at ioloop-epoll.c:201 #20 0x080dcc10 in io_loop_run (ioloop=0x91b79b0) at ioloop.c:308 #21 0x0806b35a in main (argc=152894696, argv=0xbff34f34, envp=0xbff34f3c) at main.c:293 -- Ralf Hildebrandt (Ralf.Hildebrandt(a)charite.de) snickebo(a)charite.de Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.arschkrebs.de "FOOT-AND-MOUTH BELIEVED TO BE FIRST VIRUS UNABLE TO SPREAD THROUGH MICROSOFT OUTLOOK Researchers Shocked to Finally Find Virus That Email App Doesn't Like".

2 2

[Dovecot] related, but off-topic: how to allow users to change password?
by Sahil Tandon 04 Aug '08

04 Aug '08

My dovecot is currently configured to authenticate vs. a userdb/passdb passwd-file that contains, for each user: username:passhash:5000:5000::/path/to/home::userdb_mail=/path/to/maildir Is it possible to let users authenticate and change their passwords? There are some webmail client add-ons that allow such things if users are system accounts or in a MySQL/LDAP db. Does anyone else use passdb/userdb passwd-files like above and have a method for allowing users to change their passwords from the web? Sorry for the slightly off-topic question, but hoping another Dovecot admin has solved this problem. Preference is to not to be tied to any particular webmail client just for this change password feature.

3 7

[Dovecot] Thunderbird and Dovecot on FC5 taking a long time to retrieve message
by Bruen, Mark 02 Aug '08

02 Aug '08

I'm running FC5 (2.6.15-1.2054_FC5smp) and Dovecot dovecot-1.0-0.beta8.2.fc5 with Thunderbird 2.0.0.16. I set up imap (dovecot) so I can access my mail locally or remotely. It seems to take a very long time (minutes sometimes) for an Email to be retrieved after I select it in the folder list and/or in the Email list locally or remotely. I've traced the imap process and found it doing a lot of reading (read() system calls) for a long time. I do have a high message count in some of these folders (i.e.: 20000 or so). Is there any way to improve performance (use more memory, cache indexes, tune I/O parameters, etc...) ? Thanks. -Mark

2 1

[Dovecot] POP3 locking
by Adrian Overbury 02 Aug '08

02 Aug '08

I'm trying to understand what dovecot's behavior will be in a given scenario to see if it will work as a (hopefully better) replacement for the home-grown pop3 server we currently use. User A is on a slow dialup connection, and uses, oh, let's say Outlook, since that's where most of our problems seem to spring from. User A uses outlook to download his mail over pop3. Half way through downloading a particularly large message, Outlook decides that the whole process isn't happening fast enough, so it opens another connection to the server and tries to download (potentially) the same message again. Now, our current server establishes a lock on the mailbox, and when that second connection happens it simply responds that there's no messages to collect... we used to have it terminate the connection, but this brings up confusing error messages on User A's client, and they call up and complain -- not an ideal situation. I've got a dovecot installation on my testing server, and I think I've set everything up correctly; it authenticates from my LDAP database, finds the home directory, lists the mail, all that... I believe somewhere it there it uses fcntl to establish an advisory lock on the mailbox (oh, we're using Maildir, by the way). I'm not sure where, though, or how long the lock persists for, or what its actual purpose is, because my tests show me that I can log the same users in with two concurrent sessions and get the same message twice. It's probably a fault in my understanding of how locking in user sessions of a pop3 server should work, but that doesn't sound right to me. Can someone explain if what I'm seeing is correct, or what problem it may be symptomatic of? Does dovecot even do concurrent-user-session locking? So far I've enjoyed playing with dovecot -- far more than the current server we use. I'd like to use it as our primary pop3 server, but preventing users from having concurrent sessions and getting the same message more than once, and keeping them from seeing errors because of their client trying to open multiple sessions is important. Oh, and I'm user dovecot 1.0.beta3, since I don't really have the option of upgrading the OS on my mail servers any time soon. Adrian

9 13

[Dovecot] Quota warnings wrong behaviour (1.1.2)
by Włodek Waligórski 02 Aug '08

02 Aug '08

Hi, I use the latest version of dovecot 1.1.2. Thanks to the excellent docs I managed to get everything working so far, but ... I'm experiencing such strange behaviour when user gets over 90% of quota (the threshold is such): 1. user uses say 89% of his ~/Maildir 2. message arrives that increases quota usage to 92% 3. quota_warning is _NOT_ triggered 4. user deletes the surplus message and gets back to 89% (quota_rule2: Trash:ignore) 5. quota_warning is triggered and quota warning message arrives So the event gets triggered when user passes the quota threshold, but from a "wrong direction". I would expect that message should arrive together with the surplus message. Below I paste my dovecot.conf and "./configure" opts: -------------------cut--------------------------------------- # dovecot -n # 1.1.2: /usr/local/etc/dovecot.conf base_dir: /usr/local/var/run/dovecot/ log_path: /dev/stderr info_log_path: /dev/stderr log_timestamp: listen: 127.0.0.1:143 ssl_listen: 0:993 ssl_cert_file: /var/qmail/control/servercert.pem ssl_key_file: /var/qmail/control/servercert.pem ssl_cipher_list: ALL:!LOW verbose_ssl: yes login_dir: /usr/local/var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login verbose_proctitle: yes first_valid_uid: 89 last_valid_uid: 89 mail_uid: vpopmail mail_gid: vchkpw mail_location: maildir:~/Maildir mail_debug: yes mail_plugins: quota imap_quota imap_client_workarounds: outlook-idle auth default: user: vpopmail verbose: yes debug: yes passdb: driver: vpopmail args: quota_template=quota_rule=*:backend=%q userdb: driver: vpopmail plugin: quota: maildir quota_rule: ?:storage=110485760 quota_rule2: Trash:ignore quota_warning: storage=90%% /usr/local/bin/imap-quota-warning 90 ----------------------------------------------------------------------------------- # grep "./configure" config.log | head -1 $ ./configure --disable-ipv6 --without-passwd --without-passwd-file --without-shadow --without-pam --without-checkpassword --without-bsdauth --without-gssapi --without-sia --without-ldap --with-vpopmail --without-static-userdb --without-prefetch-userdb --without-sql --without-pgsql --without-mysql --without-sqlite --with-ssl=openssl ------------------------------------------------------------------------------------ My system is x86 Debian-testing, SMP. -Włodek

1 0

[Dovecot] Permission denied creating inbox file in /var/mail
by Steve Ochani 01 Aug '08

01 Aug '08

Hello all, I'm using dovecot version 1.07 on CentoOS 5 (clone of RHEL 5). When there is no existing mbox file for a user in /var/mail I get the following error: --------------- Jul 31 16:32:32 newnewton dovecot: imap-login: Login: user=<testm2>, method=PLAIN, rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured Jul 31 16:32:32 newnewton dovecot: IMAP(testm2): open(/var/mail/testm2, O_CREAT) failed: Permission denied Jul 31 16:32:32 newnewton dovecot: IMAP(testm2): access() failed with mbox file /var/mail/testm2: No such file or directory Jul 31 16:32:32 newnewton dovecot: IMAP(testm2): stat() failed with mbox file /var/mail/testm2: No such file or directory Jul 31 16:32:32 newnewton dovecot: IMAP(testm2): Connection closed ---------------- My persimmons on /var/mail (which is a symlink to /var/spool/mail) : drwxrwxr-x 2 root mail 4096 Jul 31 16:32 mail I have tried adding the mail group as mail_privileged_group, the output of dovecot -n : -------------------- # 1.0.7: /etc/dovecot.conf login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_privileged_group: mail mail_location: mbox:~/IMAPmail:INBOX=/var/mail/%u mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 auth default: passdb: driver: pam userdb: driver: passwd -------------------- Here is the permission on /etc/dovecot.conf -rw-r--r-- 1 root root 42833 Jul 31 15:30 /etc/dovecot.conf I've searched google and the mailing list archive and tried the couple of things commonly suggested. As for a test I changed perms on /var/spool/mail to 777 and then dovecot made the inbox file. The file ended up being owned by the user and the group owner was the group that the user belongs to, not mail. When I create new users using useradd there is a 0 byte file created in /var/mail for the user but I use scripts to create student accounts every semester (about 10,000) so I'm trying to avoid having to add more things that the script will have to create. Any help is greatly appreciated. Thanks -Steve O.

3 4

[Dovecot] dovecot.sieve file location?
by kbajwa 01 Aug '08

01 Aug '08

CentOS 5.2 Postfix-2.3.3 Dovecot-1.1.1 Dovecot.Sieve-1.1.5 I have setup with: home_mailbox = Maildir/ (/etc/postfix/main.cf) & mail-location = maildir:~/Maildir (/etc/dovecot.conf) I have created a 'test' user to test Sieve 'Vacation' setup. My questions are: 1. Which folder '.dovecot.sieve' script is copied into? Is it 'home/test' -or- 'home/test/Maildir' or someplace else? 2. '.dovecot.sieve' script parameter ":days 1" means that the reply is sent once a day. Is it possible to send the reply 'immediately'? Kirti

2 1

[Dovecot] Dovecot load balancing
by Thomas Hummel 01 Aug '08

01 Aug '08

Hello, I'd like to figure out how to set up a site running dovecot on multiple computers for load balancing reasons. I'm currently running dovecot-1.0.14 on a 8GB RAM, 2 quad-core 2.66Ghz Xeon single server which runs FreeBSD 6.2-STABLE SMP. . the mailbox format was mbox and I successfully migrated to Maildir only . mailboxes are on an NFS NetApp server, attribute caching is off . indexes are locally stored . the number of users is around 2500, some of them having huge mailboxes (~ 1 or 2 GB) . a large amount of users is using IMAP but there are also many POP3 users . the passdb/userdb is openLDAP . for now, I neither use namespaces, nor quotas nor deliver, nor any plugin, but I plan to use namespaces and ACL to implement shared mailboxes. The same machine is running postfix-2.4.6 with amavisd-new-2.5.4 (no spamassassin) and clamav-0.93.1. I'm using procmail-3.22 as the LDA. I installed dovecot-1.1.2 on non-standard ports for test and plan to switch to it as I read on this list it performs better, load wise. This setup (1.0.14) works great except that, compared to the time mailboxes were in mbox format, the load average (as shown by 'top') goes higher from a significant amout on a regular basis and sometimes goes over the top. On "normal" circumstances, the number of processes is around 1400 and the load oscillates between 1 to 10 and 30 to 60. Most of the time, I'd say the load average is around 20. Every friday a message (no attachement, decent size) is sent to all users : in such circumstances (but only sometimes, not every time : let's say half the time such a message is sent), the load goes so high that I have to stop dovecot to let procmail deliver the message or even reboot the machine. Sometimes, the load climbs up to something like 150, then goes back to the 'normal' case described above. I know multi-master replication is on the roadmap. I know some dovecot sites use in the meantime several dovecot servers. I'd like to know how those sites do the load balancing, the main problem beeing to be able to direct each user to the same dovecot server each time as stated in the Wiki (http://wiki.dovecot.org/NFS) I don't think that DNS round robin would do the trick because some UA (for instance Thunderbird) often open up to 5 connexions for the same user, unless maybe such UA makes a single 'gethostbyname()', thus connecting 5 times to the same physical server ? What are the options to achieve such a setup ? Any successful experiences ? Thank you -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Pôle informatique - systèmes et réseau

8 13

[Dovecot] One LDAP attribute for many variables
by Juan Asensio Sánchez 31 Jul '08

31 Jul '08

Hi Using Dovecot 1.1.2 with LDAP. If i have this: user_attrs = uid=home=/var/vmail/%$,mailuserquota=quota_rule=*:storage=%$,=mail=maildir:/var/vmail/%n/Maildir OK. But if i have this: user_attrs = uid=home=/var/vmail/%$,mailuserquota=quota_rule=*:storage=%$,uid=mail=maildir:/var/vmail/%$/Maildir I get this error: deliver(usuario1): Jul 25 12:59:08 Error: Per-user script path is unknown. See http://wiki.dovecot.org/LDA/Sieve#location The only difference is that I use the uid LDAP attribute twice. Why does this happen?

2 1

[Dovecot] Seen flag in maildir filename not being respected
by Eduardo M KALINOWSKI 31 Jul '08

31 Jul '08

Hi, I'm using dovecot 1.1.2 (but I've noticed this since 1.1.1 which I was using until yesterday). It seems dovecot is ignoring the "S" flag in Maildir filenames, and is relying only in its Index Files to determine if a message has been read or not. I say that because if I delete the dovecot.index.* files for a mail folder, all the mails in there appear as unread. Also, I've tried accessing the maildir directly (using heirloom-mailx, but mutt should have done, too) and reading a new message. The file name was changed to add a "S" to the end, but this message was still marked as "unread" when the mail folder was accessed via IMAP. The flags R, F and T are correctly read from the filename if no index is present. I haven't tested the other flags. I'm using dovecot's deliver, and it creates filenames such as "1217450416.M77457P5201.mail.kalinowski.com.br,S=1377,W=1411:2,S", that is, perfectly fine. dovecot -n: # 1.1.2: /etc/dovecot/dovecot.conf log_path: /var/log/dovecot/main.log info_log_path: /var/log/dovecot/info.log log_timestamp: %Y-%m-%d %H:%M:%S ssl_cert_file: /etc/ssl/certs/server.pem ssl_key_file: /etc/ssl/private/server.pem login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login login_processes_count: 1 first_valid_uid: 100 mail_privileged_group: mail mail_location: maildir:/home/vmail/%d/%n/INBOX:INDEX=/home/vmail/%d/%n/dovecotidx mail_plugins: quota imap_quota zlib auth default: mechanisms: plain login cram-md5 passdb: driver: passwd-file args: username_format=%n /home/vmail/%d/db/passwd passdb: driver: pam userdb: driver: static args: uid=104 gid=8 home=/home/vmail/%d/%n userdb: driver: passwd socket: type: listen client: path: /var/run/dovecot/auth-client mode: 438 master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: mail plugin: quota: maildir quota_rule: ?:storage=0 quota_rule2: Trash:ignore quota_rule3: Spam:ignore quota_rule4: Spam.Errado:ignore sieve: /home/vmail/%d/db/sieves/%n.sieve

2 3

[Dovecot] wrong permission
by Cor Bosman 31 Jul '08

31 Jul '08

Im still finding a number of control directories that have the wrong permission: Jun 26 00:02:34 userimap13.xs4all.nl dovecot: IMAP(xxx): file_dotlock_create(/var/spool/mail/dovecot-control/g/gl/xxx/INBOX/.Apple Mail To Do/dovecot-uidlist) failed: Permission denied userimap1# ls -al "/var/spool/mail/dovecot-control/g/gl/xxx/INBOX/.Apple Mail To Do" total 8 drw------- 2 xxx user 4096 May 12 23:43 . drwx------ 7 xxx user 4096 May 12 23:43 .. This folder was created May 12, well after us starting to use 1.1RC versions. I currently fixed a few hundred of these (out of millions of folders), and whats interesting is that a very large percentage of those (1/3th) is the folder "Apple Mail To Do", created by Mail.App I think. Obviously that same folder is no where near 1/3th of our total folder number, so thats a bit strange. I really doubt this is some local setting issue, because then id see much more of those. Right now it's a tiny fraction of our total folder amount, which leads me to believe it's some weird edge case in the dovecot code. Anyone have any ideas? Cor

2 9

[Dovecot] dovecot-imap displays empty domainalias mailboxen
by Kacper Wysocki 31 Jul '08

31 Jul '08

Hi folks, I'm using dovecot 1.0.13 as the IMAPS frontend for a vpopmail/qmail virtual domain setup. Dovecot is set up as follows: passdb vpopmail{ } userdb vpopmail{ } I've added a domain alias for the main domain with vaddaliasdomain and email to post@aliasdomain is delivered to post@maindomain and can be checked with pop. However, when I try to check IMAP through the account post@aliasdomain I am confronted with an empty mailbox. If I log in using post@maindomain I get the expected contents. Why can't my users log in using user@aliasdomain to check their emails? Regards, Kacper Wysocki -- http://kacper.doesntexist.org http://windows.dontexist.net There is symmetry in chaos, and chaos in excessive order. Though you may see heaven or hell, remember that it is your mind which creates them. Avoid grasping the one or fleeing the other.

1 0

Re: [Dovecot] Some help required - dovecot: IMAP(matthew): unlink(/home/matthew/Maildir/cur/new) failed: Operation not permitted
by Matthias Andree 31 Jul '08

31 Jul '08

Hi I hope you're not offended by posting a quote to the list... you sent the mail just to me. On Thu, 31 Jul 2008, matbic(a)gmail.com wrote: > Here here is an excerpt: > > ls -l home/matthew/Maildir/cur > ... > drwx------ 2 matthew matthew 512 Jul 30 17:48 cur:2,ST > drwx------ 2 matthew matthew 512 Jul 31 06:55 new > drwx------ 2 matthew matthew 512 Jul 30 18:21 tmp:2,ST > > Is this to be expected or is this my problem? These (in .../Maildir/cur) are your problem - someone created a Maildir underneath Maildir/cur, and dovecot or some other software considered the three directories messages, and goofed up. Check your delivery recipes so that none deliver to .../Maildir/, if you find any, adjust them deliver to .../Maildir/ instead. I'd suggest to: cd /home/matthew/Maildir/cur # move potential messages out to the proper new/... directory # if mv complains about nonexistent .../*, all the better! mv 'cur:2,ST/'* 'new/'* 'tmp:2,ST/'* ../new/ # get rid of the bogus directories rmdir '???:2,ST/' new cd - and see if that fixes the problem. If rmdir fails because there are hidden files, see what they are and where to move them, if the {cur,tmp}:2,ST or new are empty, fine, someone accidentally ran maildirmake with bogus arguments. HTH Matthias

2 1

[Dovecot] .files in dovecot-1.1.1
by John Baker 31 Jul '08

31 Jul '08

Hi there We had been using the stock Ubuntu Dapper Dovecot which is an early 1.0 beta but just upgraded to 1.1.1 to fix some read flag issues with Horde. Previously dovecot seemed to ignore files beginning with "." in the ~/mail (mbox format) directory but now shows them. There doesn't seem to be any switch in the dovcot.conf file to change this. Any such settings are about maildir. Is there anyway to make dovecot-1.1.1 ignore hidden files? Thanks -- John Baker Network Systems Administrator Marlboro College Phone: 451-7551 off campus; 551 on campus

2 1

[Dovecot] login processes from attacks staying for hours
by Kai Schaetzl 31 Jul '08

31 Jul '08

I'm in the process of rolling out new setups with dovecot on CentOS 5.2 and I notice that dovecot doesn't handle the brute-force attacks too nice. I reduced the limit a bit to some reasonable looking value: login_max_processes_count = 32 to stop them earlier and the number of processes stops at that figure when an attack happens. However, it stays at this count for hours although the attack is already over since long. For instance, my monitoring alerts me at the moment when the process count for pop3-login goes over 20 processes. This happened on three machines at 2 am with a brute-force attack from the same source that didn't last longer than a minute or so. However, the process count dropped only at 7am under 20 on two machines and on the third machine it was still over 20 when I was in the office at 9 am and finally killed them. As these machines are all not in production yet, there weren't any other logins and the single brute-force ended within one minute according to the logs (obviously when pop3-logins hit the limit). Shouldn't these processes go down to login_processes_count (3) within a few minutes? An strace shows that they are mostly doing gettimeofday lookups (=sleeping). This is the default dovecot (1.07) coming with CentOS 5.2. I've been running only one other instance of dovecot in production (0.99.11) on CentOS 4.6 so far and I don't know which behavior that displayed in the past as I just recognize that I accidentally ommitted it from monitoring. :-( I had this mailing list searched for "brute-force" to see how others handle this and what dovecot provides to stop these attacks. I have found not many threads about this. There is one with a bit more information: "Delay on failed pw attempts" from January 1. Unfortunately, this functionality is only in a later version of dovecot and it's not clear if it was implemented or not or if it would be helpful. Was it implemented? This thread also mentions fail2ban which may be one way to go, although I don't like this log parsing approach too much. Does anyone use iptables for rate-limiting per IP on the pop/imap ports to prevent brute-force attacks? Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

7 9

[Dovecot] installing plugin (autocreate_plugin.c)
by Marcin Gryszkalis 31 Jul '08

31 Jul '08

Hi I want to enable autocreate-plugin, I downloaded http://dovecot.org/patches/1.1/autocreate-plugin.c compiled as specified in comment and got autocreate_plugin.so but I'm not sure how do I install it. I have many plugins in /usr/local/lib/dovecot/ (it's FreeBSD) and subdirs, but they all have libXX_ prefixes (what do they mean?). I couldn't find any information about installing plugins on dovecot's wiki and I don't want to experiment as the server is live (not really important but still live). regards -- Marcin Gryszkalis, PGP 0x9F183FA3 jabber jid:mg@fork.pl, gg:2532994 http://the.fork.pl

2 1

[Dovecot] Some help required - dovecot: IMAP(matthew): unlink(/home/matthew/Maildir/cur/new) failed: Operation not permitted
by matbic＠gmail.com 31 Jul '08

31 Jul '08

Hi all, I have tried very hard to solve this problem but turn to the mailing list as a last resort. In the log I get, for just one account: Jul 31 09:06:17 bickertons dovecot: imap-login: Login: user=<matthew>, method=PLAIN, rip=78.130.81.201, lip=168.143.5.18, TLS Jul 31 09:06:17 bickertons dovecot: IMAP(matthew): Effective uid=1003, gid=1003, home=/home/matthew Jul 31 09:06:17 bickertons dovecot: IMAP(matthew): maildir: data=/home/ matthew/Maildir Jul 31 09:06:17 bickertons dovecot: IMAP(matthew): maildir: root=/home/ matthew/Maildir, index=/home/matthew/Maildir, control=, inbox= Jul 31 09:06:17 bickertons dovecot: IMAP(matthew): unlink(/home/ matthew/Maildir/cur/new) failed: Operation not permitted Jul 31 09:06:18 bickertons last message repeated 3 times All the other accounts work fine. I have tried removing the dovecote.index and the dovecote-keywords and uidlist files. This gets it working for a while but soon we are back to the same problem. I would really not like to lose all the mail in this account, its that of my boss, (slight note of panic) Matthew bickertons# dovecot --version 1.0.13 bickertons# dovecot -n # 1.0.13: /usr/local/etc/dovecot.conf protocols: imap imaps pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_max_processes_count: 30 max_mail_processes: 50 verbose_proctitle: yes first_valid_gid: 0 mail_privileged_group: mail mail_location: maildir:~/Maildir mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape- eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: passdb: driver: pam args: * userdb: driver: passwd

2 1

[Dovecot] lib90_cmusieve_plugin.so: undefined symbol: message_decoder_init
by Thomas Harold 31 Jul '08

31 Jul '08

After upgrading our CentOS 5 box to the latest revisions last week (including Dovecot 1.1), we're seeing the following error message in the log files. Sieve was working fine with Dovecot 1.0. I have yet to turn up anything via Google for this particular error. SELinux is not logging any error messages at the moment, so I'm pretty sure that we've properly allowed all the SELinux permissions. # cat /var/vmail/dovecot-deliver.log deliver(ruth(a)example.com): Jul 28 11:11:44 Error: dlopen(/usr/lib64/dovecot/lda/lib90_cmusieve_plugin.so) failed: /usr/lib64/dovecot/lda/lib90_cmusieve_plugin.so: undefined symbol: message_decoder_init deliver(ruth(a)example.com): Jul 28 11:11:44 Fatal: Couldn't load required plugins # ls -l /usr/libexec/dovecot/sievec -rwxr-xr-x 1 root root 165152 Jun 11 03:21 /usr/libexec/dovecot/sievec # ls -l /usr/lib64/dovecot/lda/lib90_cmusieve_plugin.so -rwxr-xr-x 1 root root 141328 Jun 11 03:21 /usr/lib64/dovecot/lda/lib90_cmusieve_plugin.so # yum list | grep "dovecot" dovecot.x86_64 1:1.1.1-2_76.el5 installed dovecot-sieve.x86_64 1.1.5-8.el5 installed dovecot.x86_64 1:1.1.2-2_77.el5 atrpms dovecot-devel.x86_64 1:1.1.2-2_77.el5 atrpms

3 8

[Dovecot] broken links to xexec module and patches
by mail＠viliar.net.ru 30 Jul '08

30 Jul '08

>From this page attaches cannot be downloaded anymore: http://wiki.dovecot.org/Plugins/xexec Error: You are not allowed to do AttachFile on this page. Login and try again. Clear message Probably files should be placed here http://www.dovecot.org/patches/ And on page above just links to it? A. -------------- "Hic Jacet Ego" gpg key: http://viliar.net.ru/public.gpg

3 3

Re: [Dovecot] broken links to xexec module and patches
by mail＠viliar.net.ru 30 Jul '08

30 Jul '08

I already ask it in maillist. Please, see first letter. I'm not the module author or author of contributed patch to remake links at wiki on my way, for example. There are free files. Original source for xexec module, kindly given by you. Patch from Stephan, to make xexec work with dovecot 1.1 and prepatched source by me after testing Stephan patch. Yes, I have the files too, so at least now it can be downloaded: Original xexec source from wiki. http://files.viliar.net.ru/os/xexec.tar.gz Patch to original xexec for dovecot 1.1 from Stephan. from his site: http://www.rename-it.nl/dovecot/patches/dovecot-xexec-1.1.v2.patch or here: http://files.viliar.net.ru/os/dovecot-xexec-1.1.v2.patch Prepatched: http://files.viliar.net.ru/os/xexec.1.1.v2.tar.gz > Why don't you write Timo about this because I don't think I have the > latest files. Ask why the links don't work. > > mail(a)viliar.net.ru wrote: >>> mail(a)viliar.net.ru wrote: >>> >>>> >From this page attaches cannot be downloaded anymore: >>>> http://wiki.dovecot.org/Plugins/xexec >>>> >>>> Error: >>>> You are not allowed to do AttachFile on this page. Login and try >>>> again. >>>> Clear message >>>> >>>> >>> Oh yeah, that's right. AttachFile got disallowed recently. I have the >>> patch for v1.1 available at: >>> >>> http://www.rename-it.nl/dovecot/patches/dovecot-xexec-1.1.v2.patch >>> >>> I think Marc Perkel will have the original xexec.tar.gz somewhere. >>> Perhaps he could put it online somewhere and adjust the wiki >>> accordingly? >>> >> >> Both ways, imho, good. Just to be assured, it can be downloaded >> somethere. >> ( I just found in my logs (by referer) user googling query, where he >> seek >> place to download xexec... :-) ) >> >> >> >> A. >> >> -------------- >> >> "Hic Jacet Ego" >> >> gpg key: http://viliar.net.ru/public.gpg >> >> >> >> > A. -------------- "Hic Jacet Ego" gpg key: http://viliar.net.ru/public.gpg

1 0

[Dovecot] Xexec Wiki Links Broken?
by Marc Perkel 30 Jul '08

30 Jul '08

Someone pointed out to me that the links to the code on the wiki for xexec no longer work. Can someone fix this?

1 0

[Dovecot] DoveCot IMAP and "inconsistent state" messages
by Chris Richards 30 Jul '08

30 Jul '08

I need some help troubleshooting this problem. It only shows up with IMAP connections. I initially thought it was related to SquirrelMail (because it gives me an 'EXPUNGE' error), but after attempting to send IMAP commands directly to the server as shown below, I'm thinking there is something else going on. The system configuration is PostFix as the MTA delivering to procmail in the mailbox (maildir format), with Dovecot handling POP3 and IMAP Postfix is version 2.3.3 Dovecot is version 1.0.rc15 procmail is version 3.22 2001/09/10 kernel is 2.6.18-53.1.14.el5, CentOS 5 There is additional info about the system configuration after the command sequence and log entries below. I've left my typos in, just in case they somehow bear on the problem. I omitted about 2050 messages from the mailbox FETCH listing, since they were all identical but for the message number, and I didn't figure you'd want to read all of that. :) Command sequence: [me@myserver~]$ telnet locahost 143 locahost/143: Name or service not known [me@myserver~]$ telnet localhost 143 Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. * OK myserver awaiting command login me mypass login BAD Error in IMAP command received by server. a001 login me mypass a001 OK Logged in. a002 list "Mail" "*" a002 OK List completed. a003 list "Folders" "*" a003 OK List completed. a004 list "Inbox" a004 BAD Error in IMAP command LIST: Invalid arguments. a005 list "Inbox" "*" * LIST (\HasNoChildren) "." "INBOX" a005 OK List completed. a006 list "" "*" * LIST (\HasNoChildren) "." "Drafts" * LIST (\HasNoChildren) "." "Spam" * LIST (\HasNoChildren) "." "Trash" * LIST (\HasNoChildren) "." "Sent" * LIST (\HasNoChildren) "." "INBOX" a006 OK List completed. * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 2088 EXISTS * 1 RECENT * OK [UNSEEN 2088] First unseen. * OK [UIDVALIDITY 1190322195] UIDs valid * OK [UIDNEXT 89700] Predicted next UID a007 OK [READ-WRITE] Select completed. a008 FETCH l:* FLAGS a008 BAD Error in IMAP command FETCH: Invalid messageset a008 FETCH 1:* FLAGS * 1 FETCH (FLAGS (\Seen)) * 2 FETCH (FLAGS (\Seen)) * 3 FETCH (FLAGS (\Seen)) * 4 FETCH (FLAGS (\Seen)) * 5 FETCH (FLAGS (\Seen)) * 6 FETCH (FLAGS (\Seen)) . . . * 2083 FETCH (FLAGS (\Seen)) * 2084 FETCH (FLAGS (\Seen)) * 2085 FETCH (FLAGS (\Seen)) * 2086 FETCH (FLAGS (\Seen)) * 2087 FETCH (FLAGS (\Seen)) * 2088 FETCH (FLAGS (\Recent)) * BYE Mailbox is in inconsistent state, please relogin. Connection closed by foreign host. These are the corresponding entries from my mail syslog during the same time period. I've included the postfix entries, as they might be relevant to the problem. Mar 31 13:55:14 myserver dovecot: imap-login: Login: user=<me>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Mar 31 13:55:33 myserver dovecot: pop3-login: Login: user=<me>, method=PLAIN, rip=xxx.xxx.xxx.xxx, lip=yyy.yyy.yyy.yyy Mar 31 13:55:35 myserver dovecot: POP3(me): Disconnected: Logged out top=0/0, retr=1/18590, del=2/2089, size=10863040 Mar 31 13:56:29 myserver postfix/smtpd[26589]: connect from unknown[79.165.160.211] Mar 31 13:56:30 myserver postfix/smtpd[26589]: 1A57E2F7E6: client=unknown[79.165.160.211] Mar 31 13:56:30 myserver postfix/cleanup[26646]: 1A57E2F7E6: message-id=<000901c89360$061afdf8$11e5c1ae@qawbud> Mar 31 13:56:35 myserver postfix/qmgr[2254]: 1A57E2F7E6: from=<amsonson(a)impsat.com.ar>, size=61232, nrcpt=1 (queue active) Mar 31 13:56:36 myserver postfix/smtpd[26651]: connect from localhost.localdomain [127.0.0.1] Mar 31 13:56:36 myserver postfix/smtpd[26651]: C98262F893: client=localhost.localdomain [127.0.0.1] Mar 31 13:56:36 myserver postfix/cleanup[26646]: C98262F893: message-id=<000901c89360$061afdf8$11e5c1ae@qawbud> Mar 31 13:56:36 myserver postfix/smtpd[26651]: disconnect from localhost.localdomain [127.0.0.1] Mar 31 13:56:36 myserver amavis[26499]: (26499-03) Passed SPAMMY, [79.165.160.211] [79.165.160.211] <amsonson(a)impsat.com.ar> -> <me(a)digitalvoice.com>, Message-ID: <000901c89360$061afdf8$11e5c1ae@qawbud>, mail_id: 47TfQi44++zM, Hits: 17.608, size: 61232, queued_as: C98262F893, 1372 ms Mar 31 13:56:36 myserver postfix/smtp[26648]: 1A57E2F7E6: to=<me(a)mydomain.com>, orig_to=<postmaster(a)digitalvoice.com>, relay=127.0.0.1[127.0.0.1]:10024, delay=6.8, delays=5.4/0.01/0.01/1.4, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C98262F893)Mar 31 13:56:36 myserver postfix/qmgr[2254]: C98262F893: from=<amsonson(a)impsat.com.ar>, size=62235, nrcpt=1 (queue active) Mar 31 13:56:36 myserver postfix/qmgr[2254]: 1A57E2F7E6: removed Mar 31 13:56:36 myserver postfix/local[26653]: C98262F893: to=<me(a)mydomain.com>, relay=local, delay=0.12, delays=0.1/0.01/0/0.01, dsn=2.0.0, status=sent (delivered to command: /usr/bin/procmail) Mar 31 13:56:36 myserver postfix/qmgr[2254]: C98262F893: removed Mar 31 13:58:07 myserver dovecot: pop3-login: Login: user=<someone>, method=PLAIN, rip=xxx.xxx.xxx.xxx, lip=yyy.yyy.yyy.yyy Mar 31 13:58:07 myserver dovecot: POP3(someone): Disconnected: Logged out top=0/0, retr=0/0, del=0/291, size=11570114 Mar 31 14:00:58 myserver dovecot: IMAP(me): Maildir /home/me/.Maildir sync: UID inserted in the middle of mailbox (85953 > 85053, file = msg.XL7B:2,) Mar 31 14:00:58 myserver dovecot: IMAP(me): Disconnected: Mailbox is in inconsistent state, please relogin. output of dovecot -n: # /etc/dovecot.conf listen: * login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting: myserver awaiting command mail_location: maildir:~/.Maildir mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 auth default: mechanisms: plain login passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postdrop master: So, now I've got two questions: 1. Is accessing a mailbox via POP3 and IMAP at the same time considered to be a Bad Thing? 2. Is having procmail drop messages directly into the directory that the IMAP process is scanning a Bad Thing? 3. Is there a better/preferred way to have Postfix/procmail deliver mail to the maildir that will keep Dovecot IMAP happy? (There don't seem to be any issues with pure POP3 access). Thanks in advance for your help, and if there's anything else you need to know that I can provide, please ask. I've tried to provide as much information up front as I can. Later, Chris

8 23

[Dovecot] Sieve extension registration
by Julian Cowley 29 Jul '08

29 Jul '08

Cool, I just happened to notice this while browsing... >From <http://www.iana.org/assignments/sieve-extensions>: Capability name: vnd.dovecot.* (anything starting with "vnd.dovecot.") Description: Extends the Sieve language with vendor-defined functionality specific to the Dovecot Secure IMAP server (http://www.dovecot.org) RFC number: Not applicable Contact address: Stephan Bosch <stephan&rename-it.nl> Timo Sirainen <tss&iki.fi> Registration Date: 2008-07-28 Any current plans for it or is it just a placeholder?

2 2

[Dovecot] Fix available for mmap on FreeBSD zfs
by Adam McDougall 29 Jul '08

29 Jul '08

Saw this just come through for 8-current, 7-stable ought to have it in a week or so. I have not encountered the problem so I would not be able to judge if this fixes it. Patch here: http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/contrib/opensolaris/uts/commo… pjd 2008-03-15 23:23:04 UTC FreeBSD src repository Modified files: sys/contrib/opensolaris/uts/common/fs/zfs zfs_vnops.c Log: Fix mmap(2) on ZFS after some changes in VM subsystem. Submitted by: alc Reported by: kris (originally) and many others Tested with: fsx MFC after: 1 week Revision Changes Path 1.28 +4 -0 src/sys/contrib/opensolaris/uts/common/fs/zfs/zfs_vnops.c

2 3

[Dovecot] limiting the per-time connections from one single IP address
by suomi 28 Jul '08

28 Jul '08

Hi every we had a havy pop3 attach yesterday morning: about 400'000 connects in three hours from one single IP address within wandadoo.fr. the easiest way, to protect the dovecot server against such attacks would be to limit the number of connections anyone can open from one single IP address to the server in a certain time. this feature is available in newer versions of postfix, where i have limited the number of SMTP connections possible from one single IP address in one minute to three (3). i checked to see in the dovecot-wiki, but found only the #login_max_processes_count = 128 #login_max_connections = 256 which both do not contain neither a per-time constraint nor a per-IP-address constraint. is this already possible with current versions of deovecot? the dovecot -n: # 1.0.14: /etc/dovecot.conf ssl_cert_file: /etc/pki/ldap/mirador.cert.pem ssl_key_file: /etc/pki/ldap/mirador.key.pem login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login first_valid_uid: 51 mail_location: maildir:%h/%m mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 auth default: passdb: driver: ldap args: /etc/openldap/dovecot.conf userdb: driver: ldap args: /etc/openldap/dovecot.conf thank you very much for any valid hint. suomi

3 2

[Dovecot] Strange checkpassword issue
by Andy Dills 28 Jul '08

28 Jul '08

I'm helping a friend setup a small mailserver using dovecot, and I'm finding a strange problem with checkpasswd that I haven't had on my servers. How is the following debug output even possible? Jul 25 12:12:20 company2 dovecot: auth(default): master out: USER 5 joe home=/var/mail/joe.com/joe/Maildir/ uid=1005 gid=1005 Jul 25 12:12:20 company2 dovecot: pop3-login: Login: user=<joe>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Jul 25 12:12:20 company2 dovecot: POP3(joe): open(/var/mail/joe) failed: Permission denied (euid=1005 egid=1005) I don't see how, when it's clearly getting the correct home directory from checkpassword, that it would then try the default mail directory. (mail_location is commented out, version 1.1.1) Here's the entire auth clause: auth default { mechanisms = plain login passdb checkpassword { args = /usr/local/sbin/checkpassword } userdb prefetch { } user = mailman # 1005,1005 socket listen { master { mode = 0666 } client { path = /var/run/dovecot/auth mode = 0660 user = postfix group = postfix } } } Any suggestions? I'm probably just missing something obvious, not having messed with setting this up for 6 months. Thanks, Andy --- Andy Dills Xecunet, Inc. www.xecu.net 301-682-9972 ---

2 2

[Dovecot] Error - Dovecot Permission denied
by kbajwa 28 Jul '08

28 Jul '08

CentOS 5.2 Postfix 2.3.3 (Came Packed with CentOS) Dovecot 1.1.1 Dovecot-Sieve 1.1.5 Did a complete new fresh install. When I send a message to: test(a)wildpeacockstudios.com, I get two error messages as listed in the /var/log/maillog: (1) (lost connection with mail.tibonline.net[12.179.81.11] while receiving the initial server greeting) (2) status=bounced (local configuration error. Command output: Fatal: open(/etc/dovecot.conf) failed: Permission denied ) Attached are copies of (a) Postfix, (b) Dovecot, (c) Dovecot-Sieve in '/home/test/' and (d) /var/log/maillog ---------------------- [root@www ~]# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no inet_interfaces = all mail_owner = postfix mailbox_command = /usr/libexec/dovecot/deliver mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = wildpeacockstudios.com myhostname = mail.wildpeacockstudios.com mynetworks = 127.0.0.0/8 myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES relay_domains = relayhost = sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot unknown_local_recipient_reject_code = 550 [root@www ~]# [root@www ~]# ---------------------- [root@www ~]# dovecot -n # 1.1.2: /etc/dovecot.conf login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_location: maildir:~/Maildir mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix [root@www ~]# ---------------------- /home/test/.dovecot-sieve require ["fileinto", "vacation"]; # Move spam to spam folder if exists "X-Spam-Flag" { fileinto "spam"; # Stop here so that we do not reply on spams stop; } vacation # Reply at most once a day to a same sender :days 1 :subject "Out of office reply" # List of recipient addresses which are included in the auto replying. # If a mail's recipient is not on this list, no vacation reply is sent for it. :addresses ["test(a)wildpeacockstudios.com"] "I'm out of office, please contact Joan Doe instead. Best regards John Doe"; ---------------------- /var/log/maillog Jul 26 09:39:28 www dovecot: Dovecot v1.1.2 starting up Jul 26 09:39:29 www postfix/postfix-script: starting the Postfix mail system Jul 26 09:39:29 www postfix/master[4963]: daemon started -- version 2.3.3, configuration /etc/postfix Jul 26 09:39:29 www postfix/qmgr[4969]: 6EBA241C0007: from=<test(a)wildpeacockstudios.com>, size=722, nrcpt=1 (queue active) Jul 26 09:39:31 www postfix/smtp[4996]: 6EBA241C0007: to=<kbajwa(a)tibonline.net>, relay=mail.tibonline.net[12.179.81.11]:25, delay=1011, delays=1009/0.15/2.3/0, dsn=4.4.2, status=deferred (lost connection with mail.tibonline.net[12.179.81.11] while receiving the initial server greeting) Jul 26 09:41:07 www dovecot: pop3-login: Login: user=<test>, method=PLAIN, rip=192.168.0.64, lip=65.103.190.107 Jul 26 09:41:08 www dovecot: POP3(test): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0 Jul 26 09:41:17 www postfix/smtpd[5583]: connect from unknown[192.168.0.64] Jul 26 09:41:17 www postfix/smtpd[5583]: D7F3F41C001C: client=unknown[192.168.0.64], sasl_method=PLAIN, sasl_username=kirtib Jul 26 09:41:17 www postfix/cleanup[5587]: D7F3F41C001C: message-id=<488B459C.90600(a)wildpeacockstudios.com> Jul 26 09:41:17 www postfix/qmgr[4969]: D7F3F41C001C: from=<test(a)wildpeacockstudios.com>, size=720, nrcpt=1 (queue active) Jul 26 09:41:17 www postfix/smtpd[5583]: disconnect from unknown[192.168.0.64] Jul 26 09:41:18 www postfix/smtp[5588]: D7F3F41C001C: to=<kbajwa(a)tibonline.net>, relay=mail.tibonline.net[12.179.81.11]:25, delay=0.43, delays=0.06/0.01/0.37/0, dsn=4.4.2, status=deferred (lost connection with mail.tibonline.net[12.179.81.11] while receiving the initial server greeting) Jul 26 09:42:05 www postfix/smtpd[5583]: connect from mail.spaceportusa.net[12.179.81.11] Jul 26 09:42:05 www postfix/smtpd[5583]: 8675D41C0028: client=mail.spaceportusa.net[12.179.81.11] Jul 26 09:42:06 www postfix/cleanup[5587]: 8675D41C0028: message-id=<87B5712FBA1548208A9A393D2D28A036@Sunshine> Jul 26 09:42:06 www postfix/qmgr[4969]: 8675D41C0028: from=<kbajwa(a)tibonline.net>, size=880, nrcpt=1 (queue active) Jul 26 09:42:06 www postfix/smtpd[5583]: disconnect from mail.spaceportusa.net[12.179.81.11] Jul 26 09:42:06 www postfix/local[5596]: 8675D41C0028: to=<test(a)wildpeacockstudios.com>, relay=local, delay=1, delays=0.72/0.26/0/0.07, dsn=5.3.5, status=bounced (local configuration error. Command output: Fatal: open(/etc/dovecot.conf) failed: Permission denied ) Jul 26 09:42:06 www postfix/cleanup[5587]: 6C2DA41C002A: message-id=<20080726154206.6C2DA41C002A(a)mail.wildpeacockstudios.com> Jul 26 09:42:06 www postfix/qmgr[4969]: 6C2DA41C002A: from=<>, size=2882, nrcpt=1 (queue active) Jul 26 09:42:06 www postfix/bounce[5598]: 8675D41C0028: sender non-delivery notification: 6C2DA41C002A Jul 26 09:42:06 www postfix/qmgr[4969]: 8675D41C0028: removed Jul 26 09:42:06 www postfix/smtp[5588]: 6C2DA41C002A: to=<kbajwa(a)tibonline.net>, relay=mail.tibonline.net[12.179.81.11]:25, delay=0.37, delays=0/0/0.37/0, dsn=4.4.2, status=deferred (lost connection with mail.tibonline.net[12.179.81.11] while receiving the initial server greeting) --------------------------------- Help in fixing these errors is highly appreciated. FYI: New to Postfix & Dovecot. Thanks. Kirti

5 8

[Dovecot] Sieve Notify Error
by Leroy Philippe 28 Jul '08

28 Jul '08

Hello, I'm using dovecot 1.1.1 and dovecot-sieve-1.1.5 . I'm very interested in the notify plugin, I've tried many code which have generated some errors (coding errors that have been arrived in the .dovecot.sieve.err) but these errors are fixed. But Notify is still not working, I've the following in mail.log :deliver(webmaster@xxx.net): SIEVE ERROR: Unknown [unimplemented] notify method mailto:phxxx@xxp.comhere is my .dovecot.sieve :require ["fileinto", "notify"];# Move spam to spam folderif exists "X-Spam-Flag" { fileinto "spam"; # Stop here so that we do not reply on spams stop;}notify :method "mailto:phxxx@xxp.com":message "Vous avez recu un message sur votre adresse"; # Don't send any further notifications stop;What's wrong? I've tried example from http://www.ietf.org/internet-drafts/draft-ietf-sieve-notify-12.txt but they are not working.Thanks for helpPhilippe _________________________________________________________________ Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx…

3 2

Re: [Dovecot] Sieve Notify Error
by Anders Melchiorsen 28 Jul '08

28 Jul '08

Leroy Philippe wrote: > notify > :method "mailto:phxxx@xxp.com" > :message "Vous avez recu un message sur votre adresse"; This seems to work: notify :method "mailto" :options "phxxx(a)example.com" :message "Vous avez recu un message sur votre adresse"; Cheers, Anders.

1 0

[Dovecot] odd pam_authenticate() failed: authentication error followed by successful imap-login
by Sahil Tandon 28 Jul '08

28 Jul '08

I am seeing the following errors in my log: Jul 27 18:14:23 aegis dovecot: auth-worker(default_with_listener): pam(user(a)host.org,74.72.46.170): pam_authenticate() failed: authentication error Jul 27 18:14:23 aegis dovecot: imap-login: Login: user=<user(a)host.org>, method=PLAIN, rip=74.72.46.170, lip=206.251.255.39, TLS This happens *only* for virtual users; local UNIX users authenticate without that first error. However, all users are able to view mail, but that default_with_listener (which I setup just so Postfix could use dovecot to authenticate SASL senders) error only occurs for virtual users. Why is default_with_listener getting involved when users are trying to connect to dovecot directly without any involvement of Postfix? Non-default configuration parameters below; thanks for any hints. # dovecot -n # 1.1.1: /usr/local/etc/dovecot.conf listen: 127.0.0.1:143 ssl_listen: *:993 login_dir: /var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login verbose_proctitle: yes first_valid_gid: 0 mail_privileged_group: mail mail_location: maildir:~/Maildir imap_client_workarounds: delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep auth default_with_listener: mechanisms: plain login digest-md5 passdb: driver: pam passdb: driver: passwd-file args: /usr/local/etc/dovecot/passwd userdb: driver: passwd userdb: driver: passwd-file args: /usr/local/etc/dovecot/users socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix auth default: mechanisms: plain digest-md5 passdb: driver: passwd-file args: /usr/local/etc/dovecot/passwd passdb: driver: pam userdb: driver: passwd-file args: /usr/local/etc/dovecot/users userdb: driver: passwd -- Sahil Tandon <sahil(a)tandon.net>

1 1

[Dovecot] dovecot.sieve file location?
by kbajwa 28 Jul '08

28 Jul '08

CentOS 5.2 Postfix-2.3.3 Dovecot-1.1.1 Dovecot.Sieve-1.1.5 I have setup with: home_mailbox = Maildir/ (/etc/postfix/main.cf) & mail-location = maildir:~/Maildir (/etc/dovecot.conf) I have created a 'test' user to test Sieve 'Vacation' setup. My questions are: 1. Which folder '.dovecot.sieve' script is copied into? Is it 'home/test' -or- 'home/test/Maildir' or someplace else? 2. '.dovecot.sieve' script parameter ":days 1" means that the reply is sent once a day. Is it possible to send the reply 'immediately'? Kirti

1 0

Re: [Dovecot] Error - Dovecot Permission denied
by Sahil Tandon 28 Jul '08

28 Jul '08

kbajwa <kbajwa(a)tibonline.net> wrote: > I have posted the permissions on another post. However, when I look at > "properties" & then "permissions" for 'dovecot.conf' file, following are the > 'permissions' listed: > > Owner: dovecot > Access: Read & Write > > Group: Mail > Access: Read-Only > > Others > Access: none This is the problem. The mailbox_command runs neither as the dovecot user nor with the mail GID. You need to give others access to read the file. # chmod o+r /etc/dovecot.conf > > Execute: [] Allow executing file as program > SELinux Context: file_t > > I hope it makes sense to you, it does not to me. > > Let me know if the above need some change. [...] -- Sahil Tandon <sahil(a)tandon.net>

2 1

[Dovecot] mail extra field to override default mail_location for only certain users
by Sahil Tandon 27 Jul '08

27 Jul '08

I am running version 1.1.1 with mail_location: maildir:~/Maildir. This is working great as all our users have UNIX accounts with nologin shells. New domains (and their users) are about to come online and we would like to migrate to a setup with virtual mailboxes/users. From the wiki and comments within dovecot.conf, I see it is possible to do this piecemeal so both local and virtual users can co-exist during the transition. My question is how to keep things working as they are for existing users/domains (which will be migrated later), and use the virtual mailboxes (and thus, a different mail_location) exclusively for the new users. I understand that multiple userdbs and passdbs can be specified, and this will take care of authentication. On http://wiki.dovecot.org/VirtualUsers#homedirs it is stated that "The userdb can return the mail extra field to override the default mail_location setting. Usually you shouldn't need this." Where is this mail extra field defined? In the userdb passwd-file or somewhere within dovecot.conf? If the former, would something like this suffice (mind the wrapping): user@domain.org::5000:5000::/home/vhosts/domain.org/:/usr/sbin/nologin::mail=m aildir:/home/vhosts/%d/%n Thanks, -- Sahil Tandon <sahil(a)tandon.net>

1 1

[Dovecot] trace shows imap proceses stuck listing folders
by Ryan Rawdon 27 Jul '08

27 Jul '08

I just moved my mail setup from one machine to a new one. After doing so, I've encountered a problem where imap processes will start accumulating, stuck in a loop eating loads of IO. Below is a trace

1 0

Re: [Dovecot] how to store flags \Seen into read-only mailbox?
by seriv＠parkheights.dyndns.org 25 Jul '08

25 Jul '08

I was looking for workaround, and tried to use one uid for all users, and ACL plugin to give permissions like: --- owner lrwstiekxa anyone rls --- rls should mean read, lookup and write-seen. Read and lookup works, and as soon as I remove these letters I can't read mail folder. But 's' is not working, I'm getting the same: --- 7 OK Store ignored with read-only mailbox. --- in rawlogs I can not find a way for users to keep their own track of what messages have been \Seen in read-only shared folder. -- Sergey Ivanov. ----- seriv(a)parkheights.dyndns.org wrote: > This problem is apparently about changeset > http://hg.dovecot.org/dovecot-1.1/rev/eec74a6ad62e. > This change makes dovecot behaviour different from what is described > in wiki, about sharing and making private /Seen flags, > see http://wiki.dovecot.org/SharedMailboxes?highlight=(flags are > shared or private) > When I've tried to revert it, first time with my client it worked > perfectly. > But then clients were not able to open any mail folders, and imap > processes were dying. > -- > Sergey Ivanov.

1 1

[Dovecot] quota vs. antispam issue
by Johannes Berg 25 Jul '08

25 Jul '08

Can you help me maybe? I don't see the bug. QUOTA=maildir QUOTA_RULE='*:storage=100M' MAIL_PLUGINS="antispam quota" MAIL_PLUGIN_DIR=/home/johannes/Projects/dovecot/antispam gdb --args /home/johannes/Projects/dovecot/dovecot-1.1/src/imap/imap GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "powerpc-linux-gnu"... (gdb) run Starting program: /home/johannes/Projects/dovecot/dovecot-1.1/src/imap/imap * PREAUTH [CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS UIDPLUS LIST-EXTENDED I18NLEVEL=1] Logged in as johannes 01 select SPAM * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 8 EXISTS * 0 RECENT * OK [UIDVALIDITY 1212140311] UIDs valid * OK [UIDNEXT 9] Predicted next UID 01 OK [READ-WRITE] Select completed. A003 APPEND SPAM () {2} + OK ab Program received signal SIGSEGV, Segmentation fault. 0x100929f4 in mail_get_physical_size (mail=0x0, size_r=0xbfeaf030) at mail.c:100 100 return p->v.get_physical_size(mail, size_r); (gdb) bt #0 0x100929f4 in mail_get_physical_size (mail=0x0, size_r=0xbfeaf030) at mail.c:100 #1 0x0fe29be0 in quota_try_alloc (ctx=0x101707a8, mail=0x0, too_large_r=0xbfeaf060) at quota.c:818 #2 0x0fe303dc in quota_check (t=0x10170158, mail=0x0) at quota-storage.c:148 #3 0x0fe30968 in quota_save_finish (ctx=0x10177c10) at quota-storage.c:251 #4 0x0fdfec58 in antispam_save_finish (ctx=0x10177c10) at antispam-storage-1.1.c:178 #5 0x10097c94 in mailbox_save_finish (_ctx=0x10159004) at mail-storage.c:738 #6 0x10016988 in cmd_append_continue_message (cmd=0x10158f98) at cmd-append.c:408 #7 0x10015804 in client_input_append (cmd=0x10158f98) at cmd-append.c:79 #8 0x101029e0 in io_loop_handler_run (ioloop=0x10154aa8) at ioloop-epoll.c:201 #9 0x10101514 in io_loop_run (ioloop=0x10154aa8) at ioloop.c:308 #10 0x1003094c in main (argc=1, argv=0xbfeaf4b4, envp=0xbfeaf4bc) at main.c:293 I'll keep digging but I don't see why return quota_check(ctx->transaction, ctx->dest_mail != NULL ? ctx->dest_mail : qt->tmp_mail); should pass NULL in the second argument. johannes

4 11

[Dovecot] dovecot 1.1.2, another assertion failure in index-mail.c: (!mail->data.destroying_stream)
by Diego Liziero 25 Jul '08

25 Jul '08

Here is the log. --- dovecot: Jul 25 07:18:35 Panic: IMAP(user): file index-mail.c: line 1091 (index_mail_close): assertion failed: (!mail->data.destroying_stream) dovecot: Jul 25 07:18:35 Error: IMAP(user): Raw backtrace: /usr/libexec/dovecot/imap [0x80f5fd4] -> /usr/libexec/dovecot/imap [0x80f6877] -> /usr/libexec/dovecot/imap(i_fatal+0) [0x80f6130] -> /usr/libexec/dovecot/imap(index_mail_close+0xf9) [0x80a8129] -> /usr/libexec/dovecot/imap [0x80a8148] -> /usr/libexec/dovecot/imap(index_mail_set_seq+0x50) [0x80a8302] -> /usr/libexec/dovecot/imap [0x8087e3b] -> /usr/libexec/dovecot/imap(mail_set_seq+0x21) [0x80b391c] -> /usr/libexec/dovecot/imap(index_storage_search_next_nonblock+0xcb) [0x80ad3e8] -> /usr/libexec/dovecot/imap(mailbox_search_next_nonblock+0x26) [0x80b6a97] -> /usr/libexec/dovecot/imap(mailbox_search_next+0x2c) [0x80b6a63] -> /usr/libexec/dovecot/imap [0x805b757] -> /usr/libexec/dovecot/imap(cmd_copy+0x1c4) [0x805b98e] -> /usr/libexec/dovecot/imap(cmd_uid+0xbb) [0x80610d3] -> /usr/libexec/dovecot/imap [0x8062494] -> /usr/libexec/dovecot/imap [0x80626c9] -> /usr/libexec/dovecot/imap [0x80627c7] -> /usr/libexec/dovecot/imap [0x8062803] -> /usr/libexec/dovecot/imap(client_input+0xb7) [0x8062991] -> dovecot: Jul 25 07:18:35 Error: IMAP(user): /usr/libexec/dovecot/imap(io_loop_handler_run+0x17d) [0x8100630] -> /usr/libexec/dovecot/imap(io_loop_run+0x35) [0x80ff8de] -> /usr/libexec/dovecot/imap(main+0xe4) [0x806de1d] -> /lib/libc.so.6(__libc_start_main+0xdc) [0x42bdec] -> /usr/libexec/dovecot/imap [0x805a1a1] dovecot: Jul 25 07:18:35 Error: child 27074 (imap) killed with signal 6 dovecot: Jul 25 07:18:35 Error: IMAP(user): Corrupted transaction log file /mailhome/user/.imap/Trash/dovecot.index.log: record size too small (type=0x40, offset=56, size=0) dovecot: Jul 25 07:18:36 Error: IMAP(user): Corrupted transaction log file /mailhome/user/.imap/Trash/dovecot.index.log: record size too small (type=0x40, offset=56, size=0) dovecot: Jul 25 07:19:33 Error: IMAP(user): Corrupted transaction log file /mailhome/user/.imap/Trash/dovecot.index.log: record size too small (type=0x40, offset=56, size=0) dovecot: Jul 25 07:19:42 Error: IMAP(user): Corrupted transaction log file /mailhome/user/.imap/Trash/dovecot.index.log: record size too small (type=0x40, offset=56, size=0) dovecot: Jul 25 07:19:48 Warning: IMAP(user): fscking index file (in-memory index) dovecot: Jul 25 07:19:48 Error: IMAP(user): Transaction log got desynced for index (in-memory index)

1 0

[Dovecot] Dovecot 1.1.2, SIGABRT on copy mail
by Andreas M. Kirchwitz 25 Jul '08

25 Jul '08

Hi folks, with the brandnew release Dovecot 1.1.2, the daemon killed itself with signal 6 (SIGABRT) when trying to save a mail from the INBOX to another folder. The mail client is PINE 4.64. After reconnecting to the IMAP server, the mail was actually copied to the destination folder, but the original mail was still in the INBOX and not flagged as "deleted". This is the panic: Jul 25 02:13:25 linux dovecot: Panic: IMAP(user2): file index-sync.c: line 39 (index_mailbox_set_recent_uid): assertion failed: (seq_range_exists(&ibox->recent_flags, uid)) Jul 25 02:13:25 linux dovecot: IMAP(user2): Raw backtrace: imap [0x80cf8e0] -> imap [0x80cf93a] -> imap [0x80cf26c] -> imap [0x809d11a] -> imap(index_mailbox_set_recent_seq+0x3e) [0x809d15e] -> imap(mbox_sync+0x105d) [0x80823fd] -> imap [0x807a454] -> imap(index_transaction_commit+0x4e) [0x809ddfe] -> imap(cmd_copy+0x35f) [0x805b26f] -> imap [0x805fd7c] -> imap [0x805fe25] -> imap [0x80605e5] -> imap(client_input+0x5e) [0x80607fe] -> imap(io_loop_handler_run+0x100) [0x80d7230] -> imap(io_loop_run+0x28) [0x80d63c8] -> imap(main+0x4a1) [0x8068321] -> /lib/libc.so.6(__libc_start_main+0xe0) [0x149390] -> imap [0x805a101] Jul 25 02:13:25 linux dovecot: child 7954 (imap) killed with signal 6 Thus, the daemon died somewhere between successfully saving a copy of the mail from INBOX to the destination folder and flagging it to be deleted in the INBOX. Just a couple of minutes later, Dovecot died again. Wanted to save a message from INBOX to another folder. But this time, the message wasn't written to the destination folder. As before, the original mail in the INBOX didn't change any flags. Jul 25 02:22:07 linux dovecot: Panic: IMAP(user2): file message-parser.c: line 770 (message_parser_parse_next_block): assertion failed: (ctx->input->eof || ctx->input->closed || ctx->input->stream_errno != 0 || ctx->broken) Jul 25 02:22:07 linux dovecot: IMAP(user2): Raw backtrace: imap [0x80cf8e0] -> imap [0x80cf93a] -> imap [0x80cf26c] -> imap(message_parser_parse_body+0) [0x80c8ba0] -> imap(message_parser_parse_body+0x1e) [0x80c8bbe] -> imap [0x8095120] -> imap [0x809528c] -> imap(index_mail_get_special+0x3a7) [0x8095757] -> imap [0x8061b94] -> imap(imap_fetch+0x148) [0x80620f8] -> imap(cmd_fetch+0x28e) [0x805bcae] -> imap [0x805fd7c] -> imap [0x805fe25] -> imap [0x80605e5] -> imap(client_input+0x5e) [0x80607fe] -> imap(io_loop_handler_run+0x100) [0x80d7230] -> imap(io_loop_run+0x28) [0x80d63c8] -> imap(main+0x4a1) [0x8068321] -> /lib/libc.so.6(__libc_start_main+0xe0) [0x149390] -> imap [0x805a101] Jul 25 02:22:07 linux dovecot: child 17931 (imap) killed with signal 6 The error cannot be reproduced with these messages. They can be saved/copied now without problems back and forth. I've tried to send more mail and reproduce the problem, but no success. Works perfectly fine. Dovecot 1.1.2 is running on Fedora 8 Linux 32 Bit with all patches and custom OpenSSL 0.9.8h. [ output of "dovecot -n" ] # 1.1.2: /usr/local/dovecot/etc/dovecot.conf ssl_cert_file: /usr/local/dovecot/etc/dovecot.crt ssl_key_file: /usr/local/dovecot/etc/dovecot.key login_dir: /usr/local/dovecot/var/run/dovecot/login login_executable: /usr/local/dovecot/libexec/dovecot/imap-login mail_location: mbox:~/Mail:INBOX=/var/spool/mail/%u auth default: mechanisms: plain login digest-md5 cram-md5 passdb: driver: passwd-file args: /usr/local/dovecot/etc/dovecot.passwd userdb: driver: passwd-file args: /usr/local/dovecot/etc/dovecot.passwd The problem was reported by a user who continued to work with his mail folders. I was only a few seconds too late to grab a copy of the INBOX and index files. Greetings, Andreas

1 0

[Dovecot] dovecot 1.1.2 dbox file_dotlock_open() failed with file
by Robert Schetterer 25 Jul '08

25 Jul '08

Hi Timo, i have failures like with deleting a folder in the log dovecot: Jul 25 02:12:14 Error: IMAP(.....com): file_dotlock_open() failed with file /usr/local/virtual/.../...@....com/zzzz/dbox-Mails/dovecot.index.log: No such file or directory with short tests i cant see any real problem folder can be created and deleted with thunderbird ( but only with tb-extra-mailbox-sep enabled ) its not a new log entry to dovecot 1.1.2 but this is first time i noticed , by near expection of the log after update, and of course i missed it by playing so much with configs -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

1 0

[Dovecot] dovecot.conf permissions
by Dan Horák 24 Jul '08

24 Jul '08

Hi, I have a little problem with defining the right permissions for dovecot.conf. The main problem is that the password for SSL certificates is stored there and the conf file is world readable by default, which makes a security problem [1]. It is not a problem to restrict the permissions to 0600, dovecot will still work, but then deliver cannot work as it reads the conf too, but it runs under arbitrary user. So my last iteration is 0640 as permission and root:mail as ownership, but that expects that deliver is run with group = mail. For the long term solution I would prefer to move the password into a separate config file so the permissions can be properly restricted there. What are your opinions? With regards, Dan [1] https://bugzilla.redhat.com/show_bug.cgi?id=436287 -- Fedora and Red Hat package maintainer

3 2

[Dovecot] Delivery notifications
by Brandon Keepers 24 Jul '08

24 Jul '08

I'm working on an application that is backed by Postfix 2.3.8 and Dovecot 1.0.13, configured with virtual domains, for handling messaging. I need to be able to send the notification (such as "You've received a new message on SomeAwesomeService. Click here to check it out", It's evil, I know) to a different email address, such as a mobile device. Eventually, we want to do other things like clear web page caches when a message is received, or sending IM notifications, but that's for another day. So basically, we want to notify our application whenever a new mail is received, and it can do all the magical things that it needs to do. I was hoping to get some feedback on the different approaches I'm looking at. From what I can tell, there's not a way to deliver to multiple virtual transports in postfix, so here's the options I see: * Content filter I could set up a "content filter" that just delivers the mail to the application, and then re-injects it back into postfix. This seems like more work than the other options just because I have to worry about re- injecting the message * Intercept delivery Replace the dovecot deliver command with a custom one that calls the dovecot deliver and then passes the message on to the application. I've written a little proof of concept for this and it seems to work, but just seem shady. * Sieve Dovecot supports Sieve, so I could just have a global sieve script that sends the notifications. This is definitely the solution I'm leaning towards. Are there any better options? Do you think this will have a significant impact on performance? Am I crazy? Thanks, Brandon

4 4

[Dovecot] making IMAP quicker on LAN
by Andrew Von Cid 24 Jul '08

24 Jul '08

Hi all, I keep on hitting this problem when migrating new clients from POP or local IMAP servers (hosted on their LAN's) to my Dovecot setup, which is hosted properly in a data center. People usually complain that it's slower and although they're getting a kick ass mail setup it doesn't look good from their point of view. I'm wondering if there is anything I could do to speed it up on their LAN's. What I mean is probably a caching IMAP proxy or some sort of replication to a local Dovecot server. Is this something Dovecot can do? I'd be really grateful for any opinions on how to tackle this problem. Many thanks, Andrew.

3 2

[Dovecot] Case sensitve problem
by Sven Schmidt 24 Jul '08

24 Jul '08

Hi! I am using Postfix, Mysql and Dovecot 1.0.rc15. It seems that Dovecot creates new mailboxes for eg. User(a)Domain.COM althoug in the name in databse is user(a)domain.com ny logging in pop3. How to solve this problem?

3 4

[Dovecot] how to store flags \Seen into read-only mailbox?
by seriv＠parkheights.dyndns.org 24 Jul '08

24 Jul '08

Hi, I'm trying to use dovecot for storing mailing lists and read-only access for users. The OS is Solaris, authentication for all readers of these lists are from Ldap through PAM, and one local user "listuser" will receive all mail and store them into it's folders (Maildirs). These maildirs are readable (read-only) for all others and they are shared by setting --- mail_location: maildir:/home/vmail/listuser/Maildir:CONTROL=/home/vmail/%u/Maildir/control:INDEX=/home/vmail/%u/Maildir/index --- Mail became readable because in each mail folder to be shared there is dovecot-shared with mode 064, and all users included into his group. But this is the problem: how to have flag \Seen stored in read-only mailbox? As recorded by rawlog, it is ignored now: --- bash-3.00# cat 20080724-103219-10616.in 3 namespace 4 lsub "" "*" 5 list "" "INBOX" 6 list "" "Trash" 7 create "Trash" 8 select "OmniTI.FreeLotto.Ops" 9 UID fetch 1:* (FLAGS) 10 uid store 1:3 +Flags (\Seen) 11 IDLE DONE 12 close 13 logout bash-3.00# cat 20080724-103219-10616.out * OK [RAWLOG TIMESTAMP] 2008-07-24 10:32:19 * NAMESPACE (("" ".")) NIL NIL 3 OK Namespace completed. * LSUB () "." "OmniTI.FreeLotto.ODS" * LSUB () "." "OmniTI.FreeLotto.Ops" 4 OK Lsub completed. * LIST (\HasNoChildren) "." "INBOX" 5 OK List completed. 6 OK List completed. 7 NO Internal error occurred. Refer to server log for more information. [2008-07-24 10:32:19] * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 3 EXISTS * 0 RECENT * OK [UNSEEN 1] First unseen. * OK [UIDVALIDITY 1216906857] UIDs valid * OK [UIDNEXT 4] Predicted next UID 8 OK [READ-ONLY] Select completed. * 1 FETCH (UID 1 FLAGS ()) * 2 FETCH (UID 2 FLAGS ()) * 3 FETCH (UID 3 FLAGS ()) 9 OK Fetch completed. 10 OK Store ignored with read-only mailbox. + idling 11 OK Idle completed. 12 OK Close completed. * BYE Logging out 13 OK Logout completed. --- -- Sergey ivanov.

1 0

[Dovecot] Quota
by M. Rodrigo Monteiro 24 Jul '08

24 Jul '08

Hello! This might be an easy question, but here it goes: how can I know the quota of an determined user? I'm trying to use maildir quota... Regards, Rodrigo. -- M. Rodrigo Monteiro falecom(a)rodrigomonteiro.net "Free as in Freedom, not free as in free beer" Linux User # 403730

2 2

Re: [Dovecot] Dovecot antispam (X-DSPAM-Signature)
by Johannes Berg 24 Jul '08

24 Jul '08

On Wed, 2008-07-23 at 23:44 +0100, Nuno Lopes wrote: > I think that the question wasn't to the point. The problem we have is in > the transition phase. At one point we have emails with the header and > emails that haven't got it but we don't want users to notice the > introduction of this plugin and DSPAM. So we would like to allow users > to move any mail to the spam folder even if those mails haven't got the > DSPAM signature. In which case the email could be moved and not passed > to dspam. > > If you see this as a functionality that could go into your plugin we > would be willing to develop the patch based on any idea you have on how > this should be done. Hmm. I don't necessarily see that as a desirable feature because in the case that something is actually wrong with the spam tagging you want to notice it isn't working right. If you really need that, just don't set an error when it happens and do nothing, allowing the move. johannes

1 0