- dovecot - dovecot.org

[Dovecot] v1.1.rc11 released
by Timo Sirainen 20 Jun '08

20 Jun '08

http://dovecot.org/releases/1.1/rc/dovecot-1.1.rc11.tar.gz http://dovecot.org/releases/1.1/rc/dovecot-1.1.rc11.tar.gz.sig This is the final v1.1 RC. Tomorrow I'll change only the version number, update the documentation and call it v1.1.0. But please test this anyway to make sure I didn't happen to break anything since rc10 :) - dovecot-uidlist is now recreated if it results in file shrinking over 25%. - Some other minor fixes

5 8

[Dovecot] Compile failure on Dovecot 1.1-rc12
by Erinn Looney-Triggs 20 Jun '08

20 Jun '08

I am getting this failure when trying to compile dovecot on Sparc Solaris 8: make[4]: Entering directory `/home/systems/looneytr/dovecot-1.1.rc12/src/lib' source='str-find.c' object='str-find.o' libtool=no \ DEPDIR=.deps depmode=gcc /bin/bash ../../depcomp \ gcc -DHAVE_CONFIG_H -I. -I../.. -I/usr/local/openssl/include -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -c str-find.c str-find.c:17: field `goodtab' has incomplete type make[4]: *** [str-find.o] Error 1 This problem has occurred on two separate systems. Have you run into this issue, or are you aware of this issue? Dovecot 1.0.14 builds just fine. Thanks, -Erinn

3 2

Re: [Dovecot] Compile failure on Dovecot 1.1-rc12
by Chris Wakelin 20 Jun '08

20 Jun '08

Erinn Looney-Triggs wrote: > Chris Wakelin wrote: > >> What version of gcc? What configure options? I had no problems with gcc >> 3.3.2 (well, a still a few compiler warnings; see >> http://www.dovecot.org/list/dovecot/2008-June/031350.html) >> >> Chris >> > > Hello, > > gcc --version 2.95.3 > > Had to set LDFLAGS and CPPFLAGS to include the openssl in > /usr/local/openssl. > > ./configure --prefix=/usr/local/dovecot --with-ssl=openssl > > I am guessing that it probably has something to do with the old version > of gcc. > > Thanks for your time, > -Erinn > No, *my* version is 'old' - yours is prehistoric :) I've just checked, and yes, gcc 2.95.2 breaks in exactly the same way for me! Best Wishes, Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

1 0

[Dovecot] debugging dovecot and sieve
by Frank Church 19 Jun '08

19 Jun '08

I have install dovecot and sieve and it doesn't appear to be working. Below is my dovecot.conf Are there some debugging settings I can use to test if dovecot is linking with sieve properly. Nothing appears to show up in the logs start dovecot.conf ======================= cat /usr/local/etc/dovecot.conf base_dir = /var/run/dovecot/ auth_verbose=yes auth_debug=yes mail_debug=yes auth_debug_passwords=yes disable_plaintext_auth=no protocols = imap imaps pop3 pop3s protocol imap { mail_plugins = quota imap_quota imap_client_workarounds = outlook-idle delay-newmail } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xx } protocol lda { postmaster_address = postmaster(a)abc.meripol.net mail_plugins = quota cmusieve log_path = /var/log/vmail/dovecot-deliver.log info_log_path = /var/log/vmail/dovecot-deliver.log } ## ## Logging ## # Log file to use for error messages, instead of sending them to syslog. # /dev/stderr can be used to log into stderr. log_path = /var/log/dovecot/error_log # Log file to use for informational and debug messages. # Default is the same as log_path. info_log_path = /var/log/dovecot/general_log # Prefix for each line written to log file. % codes are in strftime(3) # format. #log_timestamp = "%b %d %H:%M:%S " # Syslog facility to use if you're logging to syslog. Usually if you don't # want to use "mail", you'll use local0..local7. Also other standard # facilities are supported. #syslog_facility = mail #ssl_listen = ssl_disable = no ssl_cert_file = /etc/ssl/certs/dovecot.pem ssl_key_file = /etc/ssl/private/dovecot.pem #ssl_key_password = #ssl_ca_file = #ssl_verify_client_cert = no #ssl_parameters_regenerate = 168 # SSL ciphers to use #ssl_cipher_list = ALL:!LOW # Show protocol level SSL errors. #verbose_ssl = no #ssl_ca_file = /etc/pki/dovecot/certs/ca-bundle.crt mail_location = maildir:/var/vmail/%d/%u mail_extra_groups = mail first_valid_uid = 601 last_valid_uid = 601 maildir_copy_with_hardlinks = yes auth default { mechanisms = plain passdb sql { args = /etc/dovecot/sql.conf } userdb sql { args = /etc/dovecot/sql.conf } userdb prefetch { } user = nobody socket listen { master { # path = /var/run/dovecot/auth-master path = /usr/local/var/run/dovecot/auth-master mode = 0660 user = vmail group = mail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = mail } } } dict { } plugin { quota = maildir:storage=10240:messages=1000 acl = vfile:/etc/dovecot/acls trash = /etc/dovecot/trash.conf sieve = /var/vmail/%d/%u/.dovecot.sieve } ===================== end dovecot.conf Thanks vfclists

2 1

[Dovecot] Can't find next message offset
by Dean Brooks 19 Jun '08

19 Jun '08

Hi, I am getting a lot of warnings since upgrading to 1.1rc10 (from rc4): mbox /home2/seta/Mail/Sent: Can't find next message offset for uid=12 Almost always, it is the Sent or Trash folders that are giving these. Users aren't experiencing any problems, but the errors continue to come. Is this something I should be concerned about? Here is output of "dovecot -n": # 1.1.rc10: /usr/local/dovecot/etc/dovecot.conf base_dir: /var/run/dovecot/ protocols: imap login_dir: /var/run/dovecot//login login_executable: /usr/local/dovecot/libexec/dovecot/imap-login login_user: daemon mail_max_userip_connections: 5 first_valid_uid: 100 last_valid_uid: 128000 mail_privileged_group: mail mail_location: mbox:~/Mail:INBOX=/var/mail/%u:INDEX=/var/indexes/local/%u mail_nfs_storage: yes mbox_write_locks: fcntl mbox_lock_timeout: 180 mbox_lazy_writes: no mail_plugins: quota imap_quota namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: private separator: / prefix: Mail/ hidden: yes subscriptions: yes auth default: mechanisms: plain login failure_delay: 5 debug: yes passdb: driver: shadow userdb: driver: passwd plugin: quota: fs -- Dean Brooks dean(a)iglou.com

2 2

[Dovecot] Migrate to 1.1 from 1.0.14
by Nicolas Letellier 19 Jun '08

19 Jun '08

Hello. I see dovecot 1.1 will be release very soon. I'm thinking about a migration from my 1.0.14. The migration job will be hard/long? I see in http://wiki.dovecot.org/Upgrading/1.1 that dovecot-uidlist file are in a new format. It will be problem for Courier (pop/imap) upgrades? (today, I often upgrade old mailboxes in Courier to my Dovecot server). Best regards, -- - Nicolas.

2 1

[Dovecot] Using checkpassword to block ips?
by Larry Ludwig 19 Jun '08

19 Jun '08

Hi new to the list, but we are a long time user of Dovecot via DirectAdmin control panel. We, like everyone else, are seeing an increase in dictionary attacks of POP/IMAP. We want to block them. I've searched the mailing list and found a few recommended fail2ban, which really won't work for our case. We need to do this over many machines and not one or two. We also like to gather info at the network wide level. Hackers know about attacking specific server/ips too often and we've seen much more distributed attacks that go under the radar of one server monitoring setup. We've designed our own system and use a local RBL to distribute the blocked IPs. For ftp and ssh attacks it's worked very well. We would like to use the RBL to do the same with dovecot. >From my research it appears the best way to do this (and only currently) is with the checkpassword option. I haven't gotten it to work yet. We have: passdb checkpassword { args = /usr/local/bin/checkpassword deny = yes } As the first auth.. This should reject the connection if the IP matches. checkpassword can see TCPREMOTEIP enviornmental variable. In the checkpassword script we have: #!/usr/bin/perl sub read_uinfo { my($user,$passwd,$apop_ts); open X,"<&=3" or exit 111; $_ = <X>; # ugly; should use sysread instead ($user,$passwd,$apop_ts) = /^(.*)\0(.*)\0(.*)\0/; while (<X>) {}; close X; return ($user,$passwd,$apop_ts); } ($user,$passwd,$apop_ts)=$debug?(shift,shift,shift):read_uinfo; $ipaddr=$ENV{TCPREMOTEIP}; $result=system("/usr/sbin/checkdnsbl $ipaddr"); if ( $result == 0) { @ENV{"SHELL","USER","HOME"} = ($shell,$user,$home); exit 0; } else { exit 1; } My questions are as follows: - Can the deny = yes be used with checkpassword? - What am I doing wrong with the script? It should reject only the connections that are in the RBL. It blocks all -L -- Larry Ludwig Empowering Media 1-866-792-0489 x600 Managed and Unmanaged Xen VPSes http://www.hostcube.com/

2 2

[Dovecot] quote-warning details
by Alexander Prinsier 19 Jun '08

19 Jun '08

Hello, I have some questions on how quota-warning is supposed to work. -Does it keep a state, so that it doesn't send the same warning several times? Or should the script itself do something to remember it already sent a warning? -When exactly does it run? Does it run when deliver runs? Or only when the user accesses it's mailbox? Thanks, Alexander

1 0

[Dovecot] dovecot as gmail imap proxy
by Farkas Levente 18 Jun '08

18 Jun '08

hi, may be this is a bit of topic, but i hope not. it's always a big question which is the better to choose a hosting provider to keep and manage you mail or setup your own mail server, hosting, virus and spam filter etc.. now as more and more people and company move to gmail or google apps mail service it seems google can't handle the load and it's getting more and more slower. what's more not just the imap interface but nowadays the web interface used to be hang or even stop working. it's getting more and more annoying that the speed is worst than in a 10 years ago. i thing about how can this be solved without totally give up gmail as a mail service provider (and may be they can solve it in a few months/years:-). would it be possible to create a dovecot server as an imap proxy for gmail and google apps? imho many people/company would be love to use such a setup where he can use gmail in vacation or any other time, but when the email is real critical apps (not acceptable to wait 1 minutes for an email to load or to open a folder/label) than he can use a proxy server eg. dovecot which act as a imap proxy to gmail and can be hosted on closer, faster server and this speed problem never happend. what's more it can be used as a mail backup server too. anybody has any such setup, idea? would it be possible with dovecot. any other suggestion? yours. -- Levente "Si vis pacem para bellum!"

6 14

Re: [Dovecot] Using checkpassword to block ips?
by Larry Ludwig 18 Jun '08

18 Jun '08

> ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 15 Jun 2008 19:04:05 -0400 > From: "Larry Ludwig" <larrylud(a)gmail.com> > Subject: [Dovecot] Using checkpassword to block ips? > To: <dovecot(a)dovecot.org> > Message-ID: <000601c8cf3c$1cd11130$0605a8c0@tank> > Content-Type: text/plain; charset="us-ascii" > > Hi new to the list, but we are a long time user of Dovecot > via DirectAdmin > control panel. > > We, like everyone else, are seeing an increase in dictionary > attacks of > POP/IMAP. We want to block them. > > I've searched the mailing list and found a few recommended > fail2ban, which > really won't work for our case. We need to do this over many > machines and > not one or two. We also like to gather info at the network > wide level. > Hackers know about attacking specific server/ips too often > and we've seen > much more distributed attacks that go under the radar of one server > monitoring setup. > > We've designed our own system and use a local RBL to > distribute the blocked > IPs. For ftp and ssh attacks it's worked very well. We > would like to use > the RBL to do the same with dovecot. > > >From my research it appears the best way to do this (and > only currently) is > with the checkpassword option. I haven't gotten it to work > yet. We have: > > passdb checkpassword { > args = /usr/local/bin/checkpassword > deny = yes > } > > As the first auth.. This should reject the connection if the > IP matches. > checkpassword can see TCPREMOTEIP enviornmental variable. > > In the checkpassword script we have: > > #!/usr/bin/perl > > sub read_uinfo { > my($user,$passwd,$apop_ts); > open X,"<&=3" or exit 111; > $_ = <X>; > # ugly; should use sysread instead > ($user,$passwd,$apop_ts) = /^(.*)\0(.*)\0(.*)\0/; > while (<X>) {}; > close X; > return ($user,$passwd,$apop_ts); > } > > ($user,$passwd,$apop_ts)=$debug?(shift,shift,shift):read_uinfo; > > $ipaddr=$ENV{TCPREMOTEIP}; > $result=system("/usr/sbin/checkdnsbl $ipaddr"); > if ( $result == 0) { > @ENV{"SHELL","USER","HOME"} = ($shell,$user,$home); > exit 0; > } > else { > exit 1; > } > > My questions are as follows: > - Can the deny = yes be used with checkpassword? > - What am I doing wrong with the script? It should reject only the > connections that are in the RBL. It blocks all > Bump.. No one can help with this setup or issue? -L -- Larry Ludwig Empowering Media 1-866-792-0489 x600 Managed and Unmanaged Xen VPSes http://www.hostcube.com/

1 0

[Dovecot] don't follow symlinks when creating mailbox list
by Dan Horák 18 Jun '08

18 Jun '08

Hi, this issue was discussed here twice in the not so far history (http://www.dovecot.org/list/dovecot/2008-January/028317.html, http://www.dovecot.org/list/dovecot/2008-February/029147.html) but I need to open it again as it makes problems for our users on one side and on the other side we don't want to diverge from the upstream sources in our packages. I agree with Timo that simply disabling the symlink following in creating the mailbox list can give a false sense of security so the question is whether a permanent solution can be developed and how it should look like? Regards, Dan -- Fedora and Red Hat package maintainer

3 3

[Dovecot] dovecot-uidlist cleanup
by Thomas Zajic 18 Jun '08

18 Jun '08

>From http://www.dovecot.org/list/dovecot/2008-June/031235.html: > > I have noticed that the entries in the dovecot-uidlist files don't seem > > to get updated when an email is deleted or moved to .Trash. It appears > > that this list list would just keep growing over time, being full of no > > longer used filenames, and must tend to increase its processing > > overhead. > > The deleted entries are removed when a new message arrives to the > mailbox. So it's just an optimization not to waste disk I/O on rewriting > the file when it's not necessary. If this isn't happening, there's > something wrong or you're misunderstanding something. >From http://www.dovecot.org/list/dovecot/2008-June/031403.html: > > However, I DO clobber the dovecot-uidlist in .Trash as part of my > > monthly housekeeping because it tends to get very large > > All the expunged messages get removed from it the next time a new > message is added to the mailbox. So there should be no need to delete > it. (v1.1 doesn't always recreate the file, but it gets rewritten if the > resulting file would be 70% of the current size or less.) If I understand this correctly, dovecot is supposed to clean out all deleted/expunged messages from dovecot-uidlist whenever a new message is added to the respective mailbox - right? This doesn't actually seem to be the case at least with dovecot-1.0: [root@airframe]:~# dovecot --version 1.0.14 [root@airframe]:~# [root@airframe]:~# du -h ~user/Maildir/.Trash/dovecot-uidlist 13M /home/user/Maildir/.Trash/dovecot-uidlist [root@airframe]:~# wc -l < ~user/Maildir/.Trash/dovecot-uidlist 289769 [root@airframe]:~# ls -1 ~user/Maildir/.Trash/cur/ | wc -l 14 [root@airframe]:~# [root@airframe]:~# du -h ~user/Maildir/.Logs.System\ Checks/dovecot-uidlist 3,5M /home/user/Maildir/.Logs.System Checks/dovecot-uidlist [root@airframe]:~# wc -l < ~user/Maildir/.Logs.System\ Checks/dovecot-uidlist 85188 [root@airframe]:~# ls -1 ~user/Maildir/.Logs.System\ Checks/cur/ | wc -l 16069 The only mailbox where this seems to work properly is INBOX: [root@airframe]:~# du -h ~user/Maildir/.INBOX/dovecot-uidlist 4,0K /home/user/Maildir/.INBOX/dovecot-uidlist [root@airframe]:~# wc -l < ~user/Maildir/.INBOX/dovecot-uidlist 18 [root@airframe]:~# ls -1 ~user/Maildir/.INBOX/cur/ | wc -l 17 [root@airframe]:~# The server runs sendmail, the LDA is procmail, not dovecot's deliver. The .procmailrc is empty except for the bare minimum, though, all other sorting is done either via Thunderbird message filters or manually: [root@airframe]:~# cat ~user/.procmailrc MAILDIR=$HOME/Maildir DEFAULT=.INBOX/ [root@airframe]:~# Any hints? Thanks, Thomas

3 5

[Dovecot] quota attribute for ldap.
by Mauro Sanna 18 Jun '08

18 Jun '08

I want to manage quotas and I want to manage quota limit with ldap. I use debian etch with slapd version 2.3 as ldap server. I see that in the schemas that comes with openLDAP debian distribution there are no quota attributes. How you have solved it?

1 0

[Dovecot] How to seperate pop3 and imap user lookup?
by Zhang Huangbin 18 Jun '08

18 Jun '08

Hi, all. I have two column in MySQL user table: - enablepop (NOT NULL default '1') - enableimap (NOT NULL default '1') How can i config dovecot to seperate pop user lookup and imap user lookup? Thanks very much. -- Best Regards. Zhang Huangbin - Mail Server Solution for Red Hat(R) Enterprise Linux & CentOS 5.x: http://rhms.googlecode.com/

2 3

[Dovecot] v1.1.rc10 released
by Timo Sirainen 18 Jun '08

18 Jun '08

http://dovecot.org/releases/1.1/rc/dovecot-1.1.rc10.tar.gz http://dovecot.org/releases/1.1/rc/dovecot-1.1.rc10.tar.gz.sig v1.1.0 will be released on next Friday if nothing horrible happens. * LIST X-STATUS renamed to LIST STATUS and fixed its behavior with LIST-EXTENDED options. It's now compatible with STATUS-IN-LIST draft 00. - Message parsing could have sometimes produced incorrect results, corrupting BODY/BODYSTRUCTURE replies and perhaps others. - SORT: Fixed several bugs - FreeBSD 7.0: Environment clearing wasn't working correctly. This caused "environment corrupted" problems at least with deliver trying to call sendmail and running Dovecot from inetd. - HP-UX: Several fixes to get it to work (by Christian Corti) - Fixes to using expire plugin with SQL dictionary. - dbox fixes

6 5

[Dovecot] expire database
by Alfonso Sparano 17 Jun '08

17 Jun '08

Hi all I would like to know if there is function to force the load into the expire database of the old mails. I've enabled the function today (dovecot 1.1rc10) and I've a lot of old message that I think are not loaded automatically. What can I do? Thanks a Lot

2 1

[Dovecot] Mercurial repositories for ManageSieve and Sieve
by Stephan Bosch 17 Jun '08

17 Jun '08

Hello Dovecot users, Recently I was asked to use Mercurial for the ManageSieve development just like Dovecot. As a matter of fact I have been using Mercurial for some time now. Now that I am back from a short and active vacation I am ready to publish my repositories. The repositories are publicly available at: http://hg.rename-it.nl/ The -patch repositories are so-called Mercurial Queues (MQ) repositories. This provides an easy (quilt-like) means to manage patches over an upstream source repository like the one that exists for Dovecot. The patches are managed in a repository called 'patches' below the .hg directory in your main repository. Currently, these MQ repositories only have the managesieve.patch witch is the actual patch I refresh and release each time Timo makes a new Dovecot release. The following command sequence shows how to incorporate the managesieve patch repository in a freshly cloned dovecot-1.1 tree: hg clone http://hg.dovecot.org/dovecot-1.1 cd dovecot-1.1 hg clone http://hg.rename-it.nl/dovecot-1.1-managesieve-patch .hg/patches hg qpush When updating the dovecot tree it is important to unapply all patches before performing 'hg pull' on the dovecot tree: hg qpop --all hg pull hg update hg qpush This otherwise results in a multi-head situation which can be resolved using a 'hg rollback' or using 'hg qpop --all' afterwards, which should gracefully clean up the situation (never merge the heads!). Updating the patch repository works as follows: hg qpop --all hg -R .hg/patches pull hg -R .hg/patches update hg qpush After 'hg qpush' the dovecot repository is patched and can be compiled as explained for the normal patch method using the .diff.gz (don't forget ./autogen.sh for compiling dovecot in a mercurial repository). The actual ManageSieve implementation for Dovecot-1.1 is available as a separate package and thus there exists a separate repository for it. Its compilation is no different from the .tar.gz releases, except for the fact that (just like for dovecot) ./autogen.sh needs to be executed before configure. The new (and highly experimental) Sieve implementation is available as the dovecot-libsieve repository. It contains a README file that should explain most of its features and the installation procedure. This is currently still not release-ready and should not be used for any important mail whatsoever. I publish this for people who want to test and play around with it to provide feedback on early bugs and (release-critical) missing features. The TODO and README files provide an overview of my current progress towards a first release. Regards, Stephan.

1 0

[Dovecot] Re-applying Sieve rules on existing messages
by Tomasz K Jarzynka 17 Jun '08

17 Jun '08

Hi, I saw this hack on the Internet once but now that I need it, can't find it anymore. Does anybody know how to trick Dovecot LDA/Sieve into filtering mail that has already been stored into a folder? Thanks in advance ;) -- Tomasz K. Jarzynka / +48 601 706 601 / tomee(a-t)genesilico(d-o-t)pl Laboratory of Bioinformatics and Protein Engineering | www.genesilico.pl International Institute of Molecular and Cell Biology | www.iimcb.gov.pl

2 1

[Dovecot] quota-warning.sh
by Drew Marshall 17 Jun '08

17 Jun '08

Hi I have just installed Dovecot (Moved from Courier-IMAP) and have just about everything running well thanks to some great docs in the wiki (Thank you to all those who contributed!) however I have not managed to get the quota warnings working yet. I have done much Googling and come back with some oldish posts which help me to understand how the quota warnings work but having looked at all this I have realised I don't have a quota-warning.sh script in /usr/local/bin where the config suggests it ought to be. In fact, I don't have a file by this name any where on the box. I have downloaded both 1.1 source (Which I'm running) and 1.0 and I can't find this anywhere in the sources or the tarball. Could some one tell me where I can find this or am I supposed to make my own? If so is there and example that I can follow? Thanks in advance for your help Drew -- In line with our policy, this message has been scanned for viruses and dangerous content by Technology Tiger's Mail Launder system <www.mail-launder.com> Our email policy can be found at www.technologytiger.net/policy Technology Tiger Limited is registered in Scotland with registration number: 310997 Registered Office 55-57 West High Street Inverurie AB51 3QQ

2 2

[Dovecot] Installation Problem -
by Kaushal Gandhi 16 Jun '08

16 Jun '08

Hello, I have installed dovecot Version 1.0.14 on Centos Linux 4.6. When I do ./configure --with-pam, I get below mentioned error. Please help Best Regards Kaushal ---------------- Error ---------- Making all in imap-login make[3]: Entering directory `/tmp/dovecot-1.0.14/src/imap-login' /bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/kerberos/include -o imap-login client.o client-authenticate.o imap-proxy.o ../login-common/liblogin-common.a ../lib-imap/libimap.a ../lib-auth/libauth.a ../lib/liblib.a -L/usr/kerberos/lib -lssl -lcrypto -lgssapi_krb5 -lkrb5 -lcom_err -lk5crypto -lresolv -ldl -lz gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/kerberos/include -o imap-login client.o client-authenticate.o imap-proxy.o ../login-common/liblogin-common.a ../lib-imap/libimap.a ../lib-auth/libauth.a ../lib/liblib.a -L/usr/kerberos/lib -lssl -lcrypto -lgssapi_krb5 -lkrb5 -lcom_err -lk5crypto -lresolv -ldl -lz ../login-common/liblogin-common.a(ssl-proxy-openssl.o)(.text+0x10e9): In function `ssl_proxy_init': /tmp/dovecot-1.0.14/src/login-common/ssl-proxy-openssl.c:735: undefined reference to `SSL_CTX_set_info_callback' collect2: ld returned 1 exit status make[3]: *** [imap-login] Error 1 make[3]: Leaving directory `/tmp/dovecot-1.0.14/src/imap-login' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/tmp/dovecot-1.0.14/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/tmp/dovecot-1.0.14' make: *** [all] Error 2 --

3 2

[Dovecot] Caseless folder delivery?
by Jay Levitt 16 Jun '08

16 Jun '08

I'm using exim4 to deliver into dovecot 1.1, and using plus-addressing to deliver mailing lists directly to appropriate folders in my "lists" mailbox. I created a file called /folder-map.lists that looks like ## folder-map.lists dovecot: Dovecot lpedge: Linux PowerEdge ... and so on. So mail to lists-lpedge(a)jay.fm goes to the "Linux PowerEdge" folder. The one annoying thing: I'd like to avoid creating explicit folder-map entries where the plus-address suffix is identical an existing folder name. That *almost* works, but I like to name my folders with appropriate capitalization, and deliver doesn't seem to have a way to do "caseless" delivery. For instance, ideally, I wouldn't have to create the "dovecot: Dovecot" entry; mail to my lists-dovecot(a)jay.fm address would go into the "Dovecot" folder. I can't figure out how to do this. Is there a way to do that using deliver? Could there be? Relevant portions of the exim configuration follow. (And, p.s., am I using the new -a and -m options correctly? Are they used for anything yet?) Jay Levitt ## exim.conf ...begin routers ORIG_FOLDER = ${substr_1:$local_part_suffix} FOLDER_MAP = /etc/exim/folder-map.$local_part MAPPED_FOLDER = ${lookup{ORIG_FOLDER}lsearch{FOLDER_MAP}{$value}{ORIG_FOLDER}} # Mailboxes whose localparts are folders foldered_mailboxes: driver = accept local_part_suffix = +* : -* local_part_suffix_optional local_parts = +foldered_mailboxes address_data = user=$local_part folder="MAPPED_FOLDER" transport = dovecot_virtual_delivery ...begin transports dovecot_virtual_delivery: driver = pipe command = /usr/local/libexec/dovecot/deliver \ -f $return_path \ -a $local_part$local_part_suffix@$domain \ -d ${extract{user}{$address_data}} \ -m "${extract{folder}{$address_data}}" -n message_prefix = message_suffix = log_output return_path_add user = vmail

2 1

[Dovecot] Need help configuering Dovecot to support folders that contain sub-folders and messages
by Dan Roberts 14 Jun '08

14 Jun '08

Hi - Last year I set up a new CentOS 5 server and through the install process permitted it to set up dovecot as my IMAP server. ./dovecote --version returns "1.0.rc15" With the system up and running I moved the tar files of my old email accounts over and everything seemed to be just fine. Recently I have upgraded my primary workstation to a Mac Pro - and that of course has it's Mail application. Let me summarize briefly to be sure that I don't omit some minor detail that makes all the difference in the world. Previously I used Netscape 7.2 as my mail client and then went over to Thunderbird on the PC - in either application, under Server Settings / Advanced I had to uncheck the box "Server supports folders that contain sub-folders and messages". Then whenever I attempted to add a new subfolder I would be given a choice - "This server restricts folders to two special kinds. Allow your new folder to contain: [] Folders Only [x] Messages Only". Though perhaps not ideal, this has worked ok up till now. The Leopard Mail application doesn't seem to have this sort of support - it assumes that every folder or subfolder can and should contain both, so all I get are folders that can hold messages. This is a problem as I can't create any new folders to reorganize mail. Though I had thought about resolving this, or at least trying to when I first encountered it - life got busy. So my skills have become a bit rusty and I have not done anything about it. But now I would like to. I ported over my email and my wife's - so perhaps there is some legacy setting in those folders that prevents the bliss of folders and mail in the same subfile. But I created a new email account for my daughter and that has the same limitation. In Leopard mail, folders to hold folders look White, whereas folders to hole mail look blue. In Thunderbird Folders to hold Folders are in Italics whereas Folders to hold mail are normal font. I am also using Webmin to simplify access to the server, but I don't see anything obvious under the dovecot tool for this. The installation was the basic default, so far as I can remember. I have run Yum to update the files and at last review there was nothing outstanding. Regarding my configuration, dovecot -n reports as follows: [root@trailrunner sbin]# ./dovecot --version 1.0.rc15 [root@trailrunner sbin]# ./dovecot -n # /etc/dovecot.conf base_dir: /var/run/dovecot/ protocols: imap imaps listen: disable_plaintext_auth: yes login_dir: /var/run/dovecot//login login_executable: /usr/libexec/dovecot/imap-login mail_extra_groups: mail mail_location: mbox:~/mail:INBOX=/var/mail/%u auth default: passdb: driver: pam userdb: driver: passwd [root@trailrunner sbin]# Truly hoping that someone can help me resolve this. While I can use Thunderbird, I do like the Apple Mail feature of seeing the summary of email at the top of the list. Appreciate the help and insights - Cheers Dan

6 8

Re: [Dovecot] Need help configuering Dovecot to support folders that contain sub-folders and messages
by Charles Marcus 13 Jun '08

13 Jun '08

On 6/13/2008, Dan Roberts (dan(a)jlazyh.com) wrote: > Using Yum (or whatever it is called) I thought things were up to > date. Though I use to hack code and fearlessly write perl, my > skills are rusty and I don't want to blow a whole in the system. As I said... add atrpms.net to your available repositories... it has up to date rpms... -- Best regards, Charles

1 0

[Dovecot] Need a quick, safe method to empty /home/user/Maildir/{.Junk, .Trash}
by Jeff Kowalczyk 13 Jun '08

13 Jun '08

I have some (Thunderbird client, dovecot-1.0.13, Maildir) users who get an appalling amount of spam-with-attachment, and it's causing backups to take an inordinate amount of time. I'll implement some quota and server-side spam management when I go to dovecot-1.1, but in the meantime: What is the safest way to empty all messages within, but not delete, the following folders from the server command line: /home/user/Maildir/.Junk /home/user/Maildir/.Trash I don't want the Thunderbird-2.0.14 client to report corrupt indexing, or worse not show the folder at next use. Thanks.

7 13

[Dovecot] 1.1rc10: istream-crlf.c: assertion failed: (size != 0)
by Marco De Benedetto 13 Jun '08

13 Jun '08

Hi, I am migrating from 0.99.14 to 1.1.rc10 and from mbox to maildir. During the conversion, via convert plugin, I get this assertion failure: 2008-06-13 14:12:51 Error: IMAP(username): Next message unexpectedly lost from 4700 2008-06-13 14:12:51 Error: IMAP(username): Next message unexpectedly lost from 4700 2008-06-13 14:12:51 Panic: IMAP(username): file istream-crlf.c: line 49 (i_stream_crlf_read_common): assertion failed: (size != 0) 2008-06-13 14:12:51 Error: IMAP(username): Raw backtrace: imap [0x80d1c31] -> imap [0x80d1c9a] -> imap [0x80d159c] -> imap [0x80d6fa5] -> imap [0x80d6fc3] -> imap [0x80d81b9] -> imap(i_stream_read_data+0x39) [0x80d60f9] -> imap [0x80cadb3] -> imap [0x80cbdeb] -> imap(message_parser_parse_next_block+0x1d) [0x80cae5d] -> imap(index_mail_cache_parse_continue+0x22) [0x8096132] -> imap(maildir_save_continue+0x4b) [0x807a49b] -> imap(mail_storage_copy+0xdb) [0x80a07ab] -> imap(maildir_copy+0x5b) [0x8076ebb] -> /usr/lib/dovecot/modules/imap/lib20_convert_plugin.so(convert_storage+0x48c) [0xb7f279bc] -> /usr/lib/dovecot/modules/imap/lib20_convert_plugin.so [0xb7f2841d] -> imap(mail_namespaces_init+0x645) [0x80a1345] -> imap(main+0x3c1) [0x806ab51] -> /lib/libc.so.6(__libc_start_main+0xe0) [0xb7e02450] -> imap [0x805ca91] 2008-06-13 14:12:54 Error: IMAP(username): Mailbox conversion: Couldn't create mailbox directory Ospedale 2008-06-13 14:12:54 Fatal: IMAP(username): Mailbox conversion failed, exiting If it can be useful for debugging purpose, is there something I can do to identify the mailbox causing the failure? I am also investigating why the plugin tried to recreate directory for the already converted mailbox "Ospedale". -- Marco De Benedetto

1 0

[Dovecot] 9GB of messages in /tmp
by Charles Marcus 13 Jun '08

13 Jun '08

Hello, Well, I have a brain-dead user (using Thunderbird 2.0.0.14) who just won't listen when I tell them not to try to move 5000+ messages at one time (or if deleting, bypass the Trash), and they managed to royally screw up their maildirs... I have two problems... 1. The /tmp directory has 9+GB in it... can I just rm tmp/* on that directory without making this problem worse? and 2. One of the directories they were moving now has 5 copies of a whole bunch of messages... I'm very dangerous when it comes to command-line work beyond really basic stuff, and my scripting skills are less than inspiring... Is there a relatively safe command-line way of finding all messages that have more than one instance, and deleting all but the last instance? Tia... -- Best regards, Charles

4 6

[Dovecot] Dovecot 1.1rc9 strange messages
by Raphael Bittencourt S. Costa 13 Jun '08

13 Jun '08

Helo all, I'm working on a migration from qmail+courier+maildrop to postfix +dovecot1.1+lda and today the logs has too many strange messages like this: Jun 12 10:51:22 mailserver03 dovecot: IMAP(xxxxl(a)xxxx.com.br): Broken file /data/services/dominios/xx.com.br/m/ma/mapel//Maildir/.Sent/dovecot-uidlist line 29: UID larger than next_uid (535 >= 535) Jun 12 10:51:26 mailserver03 dovecot: POP3(xxxx(a)xxxxx.com.br): Broken file /data/services/dominios/bx.com.br/n/no/nordeste//Maildir/dovecot-uidlist line 2: UID larger than next_uid (12 >= 12) Should I worry about this? Why dovecot-uidlist is getting broken? []s, Raphael Costa

2 2

[Dovecot] "Disable non webmail IMAP access" in vpopmail and Dovecot
by Alessio Cecchi 13 Jun '08

13 Jun '08

Hello, i'm using in my installation qmail+vpopmail and now I have migrated from courier-imap to dovecot. Dovecot is very much faster with large mailbox than courier-imap. But I have a problem. vpopmail has a feature that allows you to "Disable non webmail IMAP access", many webmail using imap as if they were, and they are, a client IMAP. vpopmail give me the ability to disabile IMAP, expect for 127.0.0.1, both for individual users than for single domain. So i can grant IMAP access, from remote client, only for some users but webmail access for all. Here you can read some of my messages in the vpopmail's list: http://www.mail-archive.com/vchkpw@inter7.com/msg25880.html But with dovecot this feature seems not to be compatible. A friend of the vpopmail's list sent me a patch for dovecot but I can not get it to work: >->->->->->->->->->->->->->->->->->->->->->->->->->-> Hi Alessio, i spent over 5 hours looking for a solution to this problem and i found one working for me in dovecot sources edit src/auth/passdb-vpopmail.c than add char *remotehost = net_ip2addr(&auth_request->remote_ip); auth_request_log_info(auth_request, "vpopmail", "remote ip is: %s", remotehost); before if (((vpw->pw_gid & NO_IMAP) != 0 && line than modify the condition line to look like: if (((vpw->pw_gid & NO_IMAP) != 0 && strcmp(auth_request->service, "IMAP") == 0 *&& strcmp(remotehost, "127.0.0.1") != 0*) || ((vpw->pw_gid & NO_POP) != 0 && strcmp(auth_request->service, "POP3") == 0)) { auth_request_log_info(auth_request, "vpopmail", "%s disabled", auth_request->service); password = NULL; *result_r = PASSDB_RESULT_USER_DISABLED; } else ............... this way you will preserve webmail access and cut imap from external in case -i limit is defined in vpopmail hope it helps <-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-<-< Can someone help me in making compatible this useful feature of vpopmail with dovecot? Thank you -- Alessio Cecchi is: @ ILS -> http://www.linux.it/~alessice/ Assistenza Sistemi GNU/Linux -> http://www.cecchi.biz/ @ PLUG -> ex-Presidente, adesso senatore a vita, http://www.prato.linux.it @ LOLUG -> neo-Socio http://www.lolug.net

1 0

[Dovecot] configure error on HP-UX: C99 compatible vsnprintf() call
by Woonsan Ko 13 Jun '08

13 Jun '08

Hi All, I tried to build dovecot-1.1.rc9 on a HP-UX machine, but failed to configure with the following message: configure: error: You don't appear to have C99 compatible vsnprintf() call The environment is like the following: - command: ./configure - uname: HP-UX B.11.23 U ia64 - aCC version: HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003] Also, I tried to run `./configure CC=c99' and `./configure CC="/opt/aCC/bin/aCC -Ae" also, but the result was the same. I'm not sure, but the HP C compiler does not seem to support C99 fully with vsnprintf() call. Is there any workaround for this problem? TIA, Woonsan

2 11

[Dovecot] [Patch] Fix delay on imao-append
by Bruno Prémont 13 Jun '08

13 Jun '08

Dovecot version: 1.1-rc8, 1.1-rc9 System: Linux-2.6.2x User-Agent: claws-mail-3.3 and 3.4 When appending messages (e.g. copy from mailclient local folder or second server to dovecot imap folder) dovecot answers with: <tag> OK [APPENDUID <n> <m>] Append completed\r\n This answer often reaches the client as two or more TCP packets, the client (when not using TCP_NODELAY on its socket) ACKs with some delay. When copying lots of (small) messages this delay has a very negative impact on copy time even though there are lots of network and system resources available. Sample sniffer output on client host: ... 1 0.0000 claws dovecot IMAP Request: 14639 APPEND "Test" (\Seen) {853} 2 0.0033 dovecot claws IMAP Response: +OK 3 0.0034 claws dovecot IMAP Request: <message> 4 0.0096 dovecot claws IMAP Response: 14639 5 0.0467 claws dovecot TCP 33453 > imap [ACK] 6 0.0481 dovecot claws IMAP Response: OK [APPENDUID 1204729411 2] Append Completed. 7 0.0481 claws dovecot TCP 33453 > imap [ACK] ... The delay of about 35ms between packet 4 and its ACK in packet 5 causes copies from client to server to be extremely slow. (Client and server on same 100Mb LAN, same result if client and server are on same host) The attached patch makes dovecot send the whole answer in a single packet, thus not triggering the delay issue. As far as I found out the delay is generated by Naggle algorithm, this algorithm being used by Linux TCP stack for small packets with the aim of improving payload/overhead share. Bruno Prémont RESTENA Foundation

2 2

[Dovecot] How many imap processes per user
by Martijn de Munnik 13 Jun '08

13 Jun '08

Hi, I'm using dovecot for the first time on a production server (before dovecot I used bincimapd). I have a question about the number of imap (not imap-login) processes created for a user. I've seen 100+ processes for just 1 user. So far it only occurs for 1 user, other users have just 1 imap process. I now the user is using thunderbird and 2 mailclients are logged in at the same time (one workstation and one laptop). Is there an issue with dovecot/thunderbird? info@dem 28596 15780 0 10:48:41 ? 0:02 imap info@dem 28933 15780 0 10:50:57 ? 0:01 imap info@dem 25627 15780 0 10:28:55 ? 0:00 imap info@dem 28938 28933 0 - ? 0:00 <defunct> info@dem 29472 15780 0 10:54:23 ? 0:00 imap info@dem 25628 25627 0 10:28:55 ? 0:00 rawlog /opt/csw/ libexec/dovecot/imap info@dem 29329 29327 0 - ? 0:00 <defunct> info@dem 29805 29801 0 - ? 0:00 <defunct> info@dem 24303 24300 0 10:20:46 ? 0:00 rawlog /opt/csw/ libexec/dovecot/imap info@dem 29941 15780 0 10:58:09 ? 0:00 imap info@dem 28480 28477 0 - ? 0:00 <defunct> info@dem 28329 15780 0 10:46:28 ? 0:03 imap info@dem 29177 29176 0 - ? 0:00 <defunct> info@dem 28749 28748 0 - ? 0:00 <defunct> info@dem 29801 15780 0 10:56:56 ? 0:00 imap info@dem 29180 29179 0 10:52:05 ? 0:00 rawlog /opt/csw/ libexec/dovecot/imap info@dem 29635 15780 0 10:55:35 ? 0:00 imap info@dem 29642 29635 0 - ? 0:00 <defunct> info@dem 28477 15780 1 10:47:37 ? 0:02 imap info@dem 28200 28199 0 - ? 0:00 <defunct> info@dem 29942 29941 0 10:58:09 ? 0:00 rawlog /opt/csw/ libexec/dovecot/imap info@dem 28597 28596 0 - ? 0:00 <defunct> info@dem 28330 28329 0 - ? 0:00 <defunct> info@dem 25610 25609 0 10:28:49 ? 0:00 rawlog /opt/csw/ libexec/dovecot/imap info@dem 28748 15780 0 10:49:48 ? 0:02 imap info@dem 25609 15780 0 10:28:49 ? 0:00 imap info@dem 29176 15780 0 10:52:05 ? 0:01 imap info@dem 29327 15780 0 10:53:12 ? 0:01 imap info@dem 29179 15780 1 10:52:05 ? 0:05 imap info@dem 28199 15780 0 10:45:22 ? 0:03 imap info@dem 29474 29472 0 - ? 0:00 <defunct> info@dem 24300 15780 0 10:20:46 ? 0:00 imap All those processes are really slowing down the server. Martijn

2 1

[Dovecot] strange looking code and userdb errors
by Tony den Haan 13 Jun '08

13 Jun '08

hi, i'm trying to use passdb ldap and userdb prefetch, using the userdb_ prefixes in pass_attrs, and i get: passdb didn't return userdb entries looking at the code at auth/userdb-prefetch.c i see: if (auth_request->userdb_reply == NULL) { if (auth_request->auth->userdbs->next == NULL) { /* no other userdbs */ auth_request_log_error(auth_request, "prefetch", "passdb didn't return userdb entries"); } else { /* more userdbs, they may know the user */ auth_request_log_info(auth_request, "prefetch", "passdb didn't return userdb entries"); } callback(USERDB_RESULT_USER_UNKNOWN, auth_request); return; } is this really correct? if so it migth be a good idea to at least print different errors Tony

2 1

[Dovecot] auth issues on centos5 with ldap backend
by Jurvis LaSalle 13 Jun '08

13 Jun '08

Hi, We've had some issues with auth. /var/log/secure is full of 1000s of these lines: Jun 4 19:12:08 khan dovecot-auth: pam_unix(dovecot:auth): authentication failure; logname= uid=0 euid=0 tty=dovecot ruser= rhost=127.0.0.1 user=user123 Users can usually login OK with their ldap credentials, but occasionally logins slow to a crawl if not outright fail, esp people checking mail through Squirrelmail. Things get better after a dovecot restart. Googling around, I thought if we switched the order or disabled the second passdb we had configured for our dovecotadmin account, these failures would go away but that did not happen. Any thoughts or additional info I can provide? Pardon the unusual install prefix. We're trying to keep the source install separated from the ancient dovecot rpm shipped in rhel5. Thanks, Jurvis [root@khan ~]# /etc/dovecot/sbin/dovecot -n # 1.0.13: /etc/dovecot-1.0.13/etc/dovecot.conf log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot-info.log ssl_cert_file: /etc/pki/dovecot/certs/star.idi.harvard.edu.crt ssl_key_file: /etc/pki/dovecot/private/star.idi.harvard.edu.key login_dir: /etc/dovecot-1.0.13/var/run/dovecot/login login_executable: /etc/dovecot/libexec/dovecot/imap-login mail_location: maildir:/RAID5/mailboxes/%u maildir_stat_dirs: yes maildir_copy_with_hardlinks: yes imap_client_workarounds: outlook-idle delay-newmail auth default: executable: /etc/dovecot/libexec/dovecot/dovecot-auth master_user_separator: * debug: yes debug_passwords: yes passdb: driver: pam args: blocking=yes userdb: driver: passwd args: blocking=yes

4 9

[Dovecot] Current opened sessions
by tutankamen 12 Jun '08

12 Jun '08

Is there in Dovecot a command or another way to show current opened sessions, I mean who is connected using IMAP ti the server? It could be useful to know if I can restart my server without dusturb any client. Thank you Tutan

2 1

[Dovecot] Antispam plugin custom behavior?
by Kyle Wheeler 12 Jun '08

12 Jun '08

Hello, I currently have a setup on my system with what I call "magic folders" to enable spam filter training. Here's how it works: 1. If you have a false-negative, put the spam into the Spam.Report folder 2. If you have a false-positive (which has all kinds of ugly spamassassin protective markup in it), put the message into the Spam.NotSpam folder Currently what happens is that a cron job comes along every five minutes and processes the messages in those folders. In the case of the NotSpam folder, it strips the message of the spamassassin markup, retrains the bayesian net, and redelivers the message (e.g. via deliver). In the case of the Report folder, the message is used to train the bayesian net (among other things) and then deleted. I'd love to be able to trigger these actions when the mail is moved, rather than have a cron job inspecting the mailboxes. I looked into the antispam plugin (http://johannes.sipsolutions.net/Projects/dovecot-antispam) which seems nice but doesn't appear sufficiently generic for my needs. What would really work is if I could get it set up such that putting a message into either of those directories is turned into piping the message to a script of my choosing (a different one for each folder). Does anyone know a good way of getting my own custom behavior in here, or is my cronjob setup probably the best way? ~Kyle -- The optimist thinks this is the best of all possible worlds. The pessimist fears it is true. -- J. Robert Oppenheimer

7 14

[Dovecot] quota-rewrite patch & userdb quota overriding
by Alan Premselaar 12 Jun '08

12 Jun '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've spent the past couple of hours trying to figure this out by checking the wiki and googling, but haven't come up with anything that works yet. I just installed dovecot 1.0.14 with the quota-rewrite (1.09) patch and i'm trying to get the quota overridden via a passwd-file type userdb. I had 1.0.13 without the new quota style patched in working but having trouble figuring this out. any help would be appreciated. prior to the quota-rewrite patch (which i installed with the hopes of using quota_warn feature) i was able to put the following line into my passwd-file userdb and it was working: alan:*:1000:1000::/home/alan::userdb_quota=maildir:storeage=2048000:ignore=Sent (which is what I wanted) but now with the new quota definition style, I'm not sure what I need to define the extra fields as. here is dovecot -n: # 1.0.14: /usr/local/etc/dovecot.conf log_path: /var/log/dovecot.log protocols: imap imaps managesieve ssl_cert_file: /etc/pki/tls/certs/dovecot.pem ssl_key_file: /etc/pki/tls/private/dovecot.pem disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(managesieve): no verbose_proctitle: yes mail_location: maildir:~/Maildir mail_debug: yes maildir_copy_with_hardlinks: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve sieve_storage(default): sieve_storage(imap): sieve_storage(managesieve): ~/sieve sieve(default): sieve(imap): sieve(managesieve): ~/.dovecot.sieve auth default: ~ passdb: ~ driver: pam ~ userdb: ~ driver: passwd-file ~ args: /usr/local/etc/dovecot.passwd ~ userdb: ~ driver: passwd ~ socket: ~ type: listen ~ master: ~ path: /var/run/dovecot/auth-master ~ mode: 384 ~ user: dovecot ~ group: dovecot plugin: ~ quota_rule: *:storage=1G ~ quota_rule2: Trash:storage=100M thanks, alan -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.8 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkhPd+cACgkQE2gsBSKjZHQNMACghSk7awVX1Aj5HVeo0KjRxyZc lT0AoLJA00SiYiefi2wNrAOt7L6N5eg4 =mA8L -----END PGP SIGNATURE-----

3 3

[Dovecot] Wrong message information
by Anders 12 Jun '08

12 Jun '08

We have a few users that every so often get empty data in their message overview. From and subject are empty, and the date is 1-Jan-1970. When opening the message in full view, all things are fine. Also, the data in the actual maildir file is fine. It looks a lot like the issue described here: http://dovecot.org/list/dovecot/2008-March/029282.html The server is Linux, ext3, no NFS, and Dovecot 1.1.rc4. The few clients that have had this problem so far have been Outlook Express. What can be done to debug this? Thanks, Anders.

3 25

[Dovecot] Mutually exclusive Exim setup instructions
by Karl Schmidt 12 Jun '08

12 Jun '08

The correct way has to be one or the other: http://wiki.dovecot.org/LDA/Exim are mutually exclusive with http://wiki.dovecot.org/HowTo/DebianStable It appears that exim can either call dovecot's LDA or make the delivery itself. There may be good reasons to do it one way or the other. ---------------------------------------------------------------- Karl Schmidt EMail Karl(a)xtronics.com Transtronics, Inc. WEB http://xtronics.com 3209 West 9th Street Ph (785) 841-3089 Lawrence, KS 66049 FAX (785) 841-0434 If you are not part of the solution, you are part of the precipitate. ----------------------------------------------------------------

4 5

[Dovecot] outlook windows problem
by rashantha de silva 11 Jun '08

11 Jun '08

hello, client can not connect using outlook. has any of you noticed this problem. can not connect with imap or as pop. i am using a self signed certificate.

5 14

[Dovecot] Status of Dbox in 1.1
by Steve Fosdick 11 Jun '08

11 Jun '08

What is the status of dbox in dovecot 1.1 please? I have read the release notes and checked the archives but I can't find this information. TiA, Steve.

4 3

[Dovecot] Dovecot 1.1 rc9 compilation warnings
by Chris Wakelin 11 Jun '08

11 Jun '08

I've tried compiling 1.1.rc9 on everything to hand and I get various compilation warnings (but the compilation finishes). I don't know whether any of them are worth tracking down? I'm guessing most of the differences depend on the default gcc options and a couple of them are probably specific to our setup. All were configured with ./configure --prefix=/opt/RDGdovect --with-ssl=openssl --with-ldap Best Wishes, Chris Solaris 8/10 (SPARC gcc 3.3.2/3.4.3) > In file included from lib.h:6, > from restrict-access.c:7: > ../../config.h:564:1: warning: "_FILE_OFFSET_BITS" redefined > In file included from /opt/RDGgcc3/lib/gcc-lib/sparc-sun-solaris2.8/3.3.2/include/sys/types.h:29, > from restrict-access.c:4: > /usr/include/sys/feature_tests.h:96:1: warning: this is the location of the previous definition Solaris 10 > charset-utf8.c: In function `charset_to_utf8': > charset-utf8.c:73: warning: implicit declaration of function `buffer_append' Solaris 8 and SuSE Enterprise Linux 9 (x86-64 gcc 3.3.3) > mail-index-map.c: In function `mail_index_map_ext_hdr_check': > mail-index-map.c:171: warning: comparison between signed and unsigned > mail-index-map.c: In function `mail_index_map_clone': > mail-index-map.c:1112: warning: comparison between signed and unsigned > mail-index-sync-update.c: In function `sync_header_update': > mail-index-sync-update.c:418: warning: comparison between signed and unsigned > mail-transaction-log-file.c: In function `log_file_track_mailbox_sync_offset_hdr': > mail-transaction-log-file.c:682: warning: comparison between signed and unsigned > mailbox-list-fs-iter.c: In function `list_file_subdir': > mailbox-list-fs-iter.c:414: warning: `real_path' might be used uninitialized in this function Solaris 8/10 and SLES 9 > maildir-sync-index.c: In function `maildir_sync_index': > maildir-sync-index.c:420: warning: comparison between signed and unsigned Solaris 8/10 and Ubuntu 8.04 (i386 gcc 4.2.3) > maildir-uidlist.c: In function `maildir_uidlist_refresh_fast_init': > maildir-uidlist.c:783: warning: comparison between signed and unsigned Solaris 8/10 and SLES 9 > mail-storage.c: In function `mail_storage_create': > mail-storage.c:175: warning: `storage' might be used uninitialized in this function SLES 9 > ssl-proxy-openssl.c: In function `ssl_info_callback': > ssl-proxy-openssl.c:619: warning: passing arg 1 of `SSL_get_ex_data' discards qualifiers from pointer target type Solaris 8 and SLES 9 > idxview.c: In function `dump_extensions': > idxview.c:104: warning: `extensions' might be used uninitialized in this function Solaris 8/10, SLES 9 and Ubuntu 8.04 > fts-backend-squat.c: In function `fts_backend_squat_expunge_finish': > fts-backend-squat.c:195: warning: unused parameter `_backend' > fts-backend-squat.c:196: warning: unused parameter `box' > fts-backend-squat.c:196: warning: unused parameter `committed' Solaris 8/10 and SLES 9 > rquota_xdr.c: In function `xdr_getquota_args': > rquota_xdr.c:17: warning: unused variable `buf' > rquota_xdr.c: In function `xdr_rquota': > rquota_xdr.c:36: warning: unused variable `buf' > rquota_xdr.c: In function `xdr_gqr_status': > rquota_xdr.c:71: warning: unused variable `buf' > rquota_xdr.c: In function `xdr_getquota_rslt': > rquota_xdr.c:88: warning: unused variable `buf' Ubuntu 8.04 > istream-zlib.c: In function `i_stream_zlib_seek': > istream-zlib.c:118: warning: implicit declaration of function `gzseek64' -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

1 0

[Dovecot] Lucene index not updated when one saves a message from one folder to the other
by Asheesh Laroia 11 Jun '08

11 Jun '08

I'm running 1.1 rc8, and I enabled the Lucene indexes. I find that if a bunch of messages arrive in INBOX and I then move them to archive, the next time I do an X-TEXT-FAST search, Dovecot has to re-index the mails that I think it had indexed when they were in INBOX. This seems silly, since Dovecot was the one copying them (and then deleting, since that's what I mean by move). Will this change? -- Asheesh. -- Elliptic paraboloids for sale.

2 1

[Dovecot] Converting from maildir to dbox
by Kjartan Andreassen 11 Jun '08

11 Jun '08

Hi, We are getting the users homedir from sql ( in dovecot-sql.conf) and using the convert script we have the following settings: mail_location = dbox:%h/dbox convert_mail = maildir:%h/Maildir This just gives an error on all the folders saying they already exists. Does anyone have a config file where they have a working dbox configuration? Regards, Kjartan

2 1

[Dovecot] Auto creating client folders on the IMAP server after installing client.
by Radio Tron 11 Jun '08

11 Jun '08

Hello, could someone help. I have installed Dovecot+SSL+TLS+Thunderbird and all is well except one thing. After installing TBird and adding the required data (smtp server and auth info, imap/pop server and auth info) I am able to view mail in my TBird Inbox BUT Trash and Sent don't work - it pops up saying folder doesn't exist on the server - can't the darn thing, auto create a folder on the server instead of cribbing to me??? Is there a painless (automatic way) to auto create client directories on the Dovecot server (in the users home dir on the server - i am using maildir/). I don't want to maintain a list of clients(TBird, outlook, eudora..) with their directory structure and then remember what user has what clients installed and Gahhh! How do i do this?? Is this explained/documented somewhere in simple language(for a newbie - I'm struggling through the RFC's but they are awfully obscure and don't seem to answer my question directly)? I've also googled but that's worse. Thank you for your patience and time. I'd like to add that I plan to sync GMail, Dovecot and a multitude-of-stupid-clients in some mysterious way so any advice in advance is more than welcome.

4 15

[Dovecot] Multiple SSL certificates with dovecot.
by Andre Rodier 10 Jun '08

10 Jun '08

Hello all, By advance, I hope you'll excuse my probably not perfect English, which is not my mother tongue. I have always appreciated dovecot for this simplicity to setup and lightweight, but today, after many installations, I cannot find how to setup dovecot for my configuration. - I use only IMAPS to retrieve the mails. - I manage two domain names - I use CA-Cert certificates So,the question is : how to setup dovecot to select the appropriate certificate, according to the domain name I use when I retrieve mails using the IMAPS protocol ? Thanks. Andre Rodier.

3 3

[Dovecot] inetd & corrupt environment
by Gelu G. Lupas 09 Jun '08

09 Jun '08

Hello. I'm having the following problem with dovecot 1.0.12 and above, on a FreeBSD 7.0 system - I'm trying to run pop3-login from inetd and I keep getting this error after authentication: May 25 09:46:19 charlie dovecot: POP3(gelu): /libexec/ld-elf.so.1: environment corrupt; missing value for no-nuls oe-ns-eoh The problem persists if I uncomment the lines with no-nuls oe-ns-eoh in dovecot.conf. I've also tried running pop3-login from tcpserver/ucspi-tcp and I still get the same error. Version 1.0.1 works fine on a similar setup. Please reply if you have any idea regarding a fix for this error. I need to run dovecot under a tcp wrapper of some kind (preferably inetd) as the standalone daemon doesn't allow any method to restrict access by IP. The allow_nets extra field doesn't help much as I'm using PAM and do not want to maintain yet another passdb. Restricting access via firewall rules is not an option. Until I find a way to restrict access by IP address, dovecot will only listen on the private IP address (192.168.100.1). My dovecot configuration follows: # 1.0.13: /usr/local/etc/dovecot.conf base_dir: /var/run/dovecot/ protocols: pop3 listen: 192.168.100.1 ssl_cipher_list: ALL:!LOW disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/pop3-login login_greeting: login_process_size: 32 login_max_processes_count: 32 login_max_connections: 128 max_mail_processes: 128 verbose_proctitle: yes first_valid_uid: 1000 mail_privileged_group: mail mail_location: mbox:~/Mail/:INBOX=/var/mail/%u mail_executable: /usr/local/libexec/dovecot/pop3 mail_plugin_dir: /usr/local/lib/dovecot/pop3 pop3_uidl_format: %08Xu%08Xv pop3_client_workarounds: outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login process_size: 64 passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix ---------------------------------------------------------------------- Finally - A spam blocker that actually works. http://www.bluebottle.com/tag/4

3 4

[Dovecot] EXPUNGE delay
by Eugene 09 Jun '08

09 Jun '08

Hi people! I just switched one of my servers from Courier to Dovecot. Planned to do it anyway but had to do it faster after the discovery that courier [the version I had installed, at least] returns malformed headers for a few messages, causing Outlook Express to completely ignore them. Curiously, they were visible in Squirrelmail and Nokia Series60 e-mail client. Overal I am quite happy but have one little problem. More often than not, I have to press 'Purge' button two or more times in order to actually remove the deleted messages. The fragment of Outlook's IMAP log is below. Interestingly, Dovecot 1.0.7 (on another server) does not have such problem. Best wishes Eugene IMAP: 00:46:56 [tx] 0yc9 UID STORE 172903 +FLAGS.SILENT (\Deleted \Seen) IMAP: 00:46:56 [rx] 0yc9 OK Store completed. IMAP: 00:46:58 [tx] 623w EXPUNGE IMAP: 00:46:58 [rx] * 102 FETCH (FLAGS (\Deleted \Seen)) IMAP: 00:46:58 [rx] 623w OK Expunge completed. IMAP: 00:46:58 [tx] 62lg IDLE IMAP: 00:46:58 [rx] + idling IMAP: 00:47:02 [tx] DONE IMAP: 00:47:02 [rx] 62lg OK Idle completed. IMAP: 00:47:02 [tx] a4si EXPUNGE IMAP: 00:47:02 [rx] * 102 EXPUNGE IMAP: 00:47:02 [rx] a4si OK Expunge completed. dovecot version: 1.0.10 OS: FreeBSD 5.3-RELEASE i386 dovecot -n # 1.0.10: /usr/contrib/etc/dovecot.conf base_dir: /var/run/dovecot/ protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/certs/xxxx.pem ssl_key_file: /etc/ssl/private/xxxx.pem disable_plaintext_auth: no login_dir: /var/run/dovecot//login login_executable(default): /usr/contrib/libexec/dovecot/imap-login login_executable(imap): /usr/contrib/libexec/dovecot/imap-login login_executable(pop3): /usr/contrib/libexec/dovecot/pop3-login verbose_proctitle: yes first_valid_gid: 0 mail_extra_groups: mail mail_location: maildir:/home/%u/Maildir mail_executable(default): /usr/contrib/libexec/dovecot/imap mail_executable(imap): /usr/contrib/libexec/dovecot/imap mail_executable(pop3): /usr/contrib/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/contrib/lib/dovecot/imap mail_plugin_dir(imap): /usr/contrib/lib/dovecot/imap mail_plugin_dir(pop3): /usr/contrib/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: passdb: driver: pam userdb: driver: passwd

3 6

[Dovecot] deliver 1.0 vs 1.1
by arne van theemsche 09 Jun '08

09 Jun '08

Hi I use deliver with an auth socket I have 2 namespaces (which isn't relevant here, but anyway) namespace private { separator = / prefix = location = maildir:/var/spool/mail/%1n/%2n/%n inbox = YES #hidden = yes } namespace private { separator = / prefix = mail/ location = mbox:/home/%1n/%n/mail inbox = no hidden = no } and also an general mail_location mail_location = maildir:/var/spool/mail/%1n/%2n/%n with deliver 1.0 branch everything works fine with latest deliver 1.1rc8 I get Jun 5 13:32:18 xxx deliver(<username>): mkdir(/var/spool/mail/%1n/%2n/%n/.SPAM/cur) failed: Permission denied looks like arguments don't get resolved kind regards Arne

1 1

[Dovecot] v1.1.rc9 released
by Timo Sirainen 09 Jun '08

09 Jun '08

http://dovecot.org/releases/1.1/rc/dovecot-1.1.rc9.tar.gz http://dovecot.org/releases/1.1/rc/dovecot-1.1.rc9.tar.gz.sig Not many bug reports these last few days, so maybe this release will be a good one. + Maildir: When hardlink-copying a file, copy the W=<vsize> in the filename if it exists in the original filename. - mbox: With rc8 empty lines were inserted in the middle of saved mails' headers. - maildir: Fixed problems with opening newly saved messages which we saw in index file but couldn't see in dovecot-uidlist. Happened only when messages weren't saved via Dovecot (deliver or IMAP). - Several bugfixes to handling sort indexes - deliver: Boolean settings that were supposed to default to "yes" were set to "no" unless explicitly defined in dovecot.conf: dotlock_use_excl, maildir_copy_with_hardlinks, mbox_dirty_syncs, mbox_lazy_writes.

3 4

[Dovecot] typo in failures.c
by Mike Abbott 08 Jun '08

08 Jun '08

Hi, I found a typo on line 101 of dovecot-1.1.rc8/src/lib/failures.c. The first two arguments to io_add() are reversed. The fd should be first, and IO_WRITE second.

5 5