- dovecot - dovecot.org

[Dovecot] Error message in logs
by Jay Chandler 16 Feb '07

16 Feb '07

Mbox format, running r22. Only happening to two users so far, happened on r19 as well. Feb 12 13:52:29 wurfel dovecot: imap-login: Login: user=<username>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Feb 12 13:52:30 wurfel dovecot: IMAP(username): file mbox-sync-rewrite.c: line 404 (mbox_sync_read_and_move): assertion failed: (need_space == (uoff_t)-mails[idx].space) -- Jay Chandler Network Administrator, Chapman University 714.628.7249 / chandler(a)chapman.edu Today's Excuse: Dyslexics retyping hosts file on servers

2 1

[Dovecot] Proxy with MasterUser + Authentication issues
by Cassidy B. Larson 16 Feb '07

16 Feb '07

Per Timo's direction, I decided to give the MasterUser a try in connecting my proxy to my destination server. This might allow for the use of 'secure password' for my clients that like to check that box by default. A couple of problems I'm running into running RC15: #1: My Proxy's SQL password_query line: password_query = SELECT a.clearpasswd AS password, v.storeIP AS host, CONCAT(v.userID,'*someuser') AS destuser, 'Y' AS nologin, 'Y' AS nodelay, 'Y' AS proxy, 'somepass' AS pass FROM iwmailsystem.virtmailbox AS v NATURAL JOIN authenticate.users AS a WHERE v.userID = '%u' and v.imap_active = 1 I'm wanting to authenticate the user on the proxy before I send it off via the MasterUser to the destination server. However, I show this in the logs: Info: auth(default): client in: AUTH 1 PLAIN service=IMAP lip= x.y.z.a rip=a.b.c.d resp=AGJ1dGNoQGluZm93ZXN0LmNvbQBzZWNyZXQ= Info: auth-worker(default): sql(user(a)host.com,a.b.c.d): query: SELECT a.clearpass wd AS password, v.storeIP AS host, CONCAT(v.userID,'*someuser') AS destuser, 'Y' AS nologin, 'Y' AS nodelay, 'Y' AS p roxy, 'somepass' AS pass FROM iwmailsystem.virtmailbox AS v NATURAL JOIN authenticate.users AS a WHERE v.userID = 'user(a)host.com' and v.imap_active = 1 Error: auth(default): file auth-request.c: line 207 (auth_request_save_cache): assertion failed: (extra_fields == NULL || (strstr(extra_fields, "\tpass=") == NULL && strncmp(extra_fields, "pass=", 5) != 0)) Error: child 54122 (auth) killed with signal 6 The Wiki showed I should return a 'pass' column. However, that's choking the query up in auth-request.c. Could it be the "\tpass" from auth-request.c? If I change user(a)host.com's password to 'someass' and remove the 'pass' column from the password_query, it authenticates, and proxy's over just fine. Am I doing something wrong? I want to authenticate the user locally on the proxy and pass off the 'master password' to the proxy, but using 'pass' doesnt work. 'password' column does. Doesnt help me though for my situation :) Problem #2: I'm wanting to put the masteruser/pass in the database for quick retrieval and updating. So I setup dovecot.conf as: passdb sql { # Path for SQL configuration file, see doc/dovecot-sql.conf for example args = /usr/local/etc/dovecot-sql.conf master=yes #pass=yes } passdb passwd { } and dovecot-sql.conf with: password_query = SELECT '%u' AS user, 'master-password' AS password Trying to connect locally with a "telnet localhost 143" via: 1 login user(a)host.com*someuser "somepass" Give me this in the detail log file: Info: auth(default): client in: AUTH 1 PLAIN service=IMAP lip= a.b.c.d rip=w.x.y.z resp=AGJ1dGNoQGluZm93ZXN0LmNvbSphZG1pbkBpbmZvd2VzdC5jb20AbWFzdGVyLXBhc3N3b3Jk Error: auth-worker(default): BUG: PASSV had invalid passdb ID Warning: Killed with signal 15 I am able to successfully authenticate with the master user/pass if I store it in a passdb file. However, I'd prefer to have it in the database for obvious reasons. Any help to the above would be appreciated. thanks, Cassidy

2 6

[Dovecot] Can't login in IMAP server
by Mário Gamito 16 Feb '07

16 Feb '07

Hi, I can't login in the IMAP server. This is the log from a telnet session to port 143: Feb 16 15:38:32 mail2 dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=192.168.84.128 rip=192.168.84.128 resp=<hidden> Feb 16 15:38:32 mail2 dovecot: auth(default): checkpassword(gamito(a)mail2.telbit.pt,192.168.84.128): Executed: /usr/local/bin/auth_imap /usr/local/libexec/dovecot/checkpassword-reply Feb 16 15:38:32 mail2 dovecot: auth(default): checkpassword(gamito(a)mail2.telbit.pt,192.168.84.128): Received no input Feb 16 15:38:32 mail2 dovecot: auth(default): checkpassword: Child 15764 died with signal 11 Feb 16 15:38:34 mail2 dovecot: auth(default): client out: FAIL 1 user=gamito(a)mail2.telbit.pt temp Feb 16 15:38:40 mail2 dovecot: imap-login: Aborted login: user=<gamito(a)mail2.telbit.pt>, method=PLAIN, rip=192.168.84.128, lip=192.168.84.128, secured What is happening here ? Any help would be appreciated. Warm Regards, Mário Gamito

2 2

[Dovecot] Dovecot proxy question (hostname instead of ip)
by Wouter de Jong 16 Feb '07

16 Feb '07

Hello, We are planning to use the Proxy feature of Dovecot, but fail to implement it currently the way we would like to. Reason is that proxy insists to have an IP-address as host : Feb 15 15:43:24 proxy-test.widexs.nl dovecot: pop3-login: proxy(username): mspool01-test.widexs.nl is not a valid IP When I changed the query to force the IP-address of the above server, it works. Would it be possible to make this work, but more important ... Are there any reasons NOT to make this work ? :)) Kind regards, Wouter. -- WideXS http://www.widexs.nl Wouter de Jong System-Administrator Tel +31 (0)23 5698070 Fax +31 (0)23 5698099 Bijlmermeerstraat 62, 2131 HG HOOFDDORP, NL

3 3

[Dovecot] domain truncated
by Nemanja Miletic 16 Feb '07

16 Feb '07

Hi all, I have a problem with domain information being truncated from username during ldap search, so it can not be used in mail_location. This happens when user part of the username %n is used in pass_filter in passdb ldap search. When I use %u all username information remains and mailbox can be located. Here is my configuration. In dovecot.conf I have two locations one for system and one for virtual users: ... mail_location = maildir:/var/spool/mail/%n mail_location = maildir:/var/spool/mail/vdom/%d/%n ... Also two configurations for passdb: ... passdb ldap { args = /etc/dovecot-ldap.conf } passdb ldap { args = /etc/dovecot-ldap-virt.conf } ... Here info is searched in ldap: /etc/dovecot-ldap-virt.conf ... base = dc=%d,ou=Virtual Domains,dc=eunet,dc=yu pass_filter = (&(objectClass=posixAccount)(uid=%n)) ... And the line in log file stating that maildir can not be located: mkdir(/var/spool/mail/vdom//cone/cur) failed: Permission denied Is this a bug or I am doing something wrong. Thank You, Nemanja

3 4

[Dovecot] Where is auth_dovecot
by Mário Gamito 16 Feb '07

16 Feb '07

Hi, Shouldn't i have a file named auth_dovecot ? It's not in my system and i can't find anything about it in the docs. Any help would be appreciated. Warm Regards, Mário Gamito

1 0

Re: [Dovecot] severe performance problem (mail cache related?)
by Bill Boebel 16 Feb '07

16 Feb '07

On Fri, February 16, 2007 9:03 am, Timo Sirainen <tss(a)iki.fi> said: > Looks like my rc22 fix broke that then. It didn't loop forever, only > until client sent the whole message or until it disconnected, but it did > eat all the CPU while waiting. > > Fix here: > http://dovecot.org/list/dovecot-cvs/2007-February/007721.html > > I guess this is good enough reason for rc23. > Nice. Thanks for the quick fix. Bill

1 0

Re: [Dovecot] severe performance problem (mail cache related?)
by Bill Boebel 16 Feb '07

16 Feb '07

On Fri, February 16, 2007 6:39 am, Timo Sirainen <tss(a)iki.fi> said: > On Fri, 2007-02-16 at 03:29 -0800, Dan Price wrote: >> Well there you go, I'm a dope. I think I set mmap_disable=yes because I >> was seeing strange things happening where there would be thousands >> (millions?) of madvise(DONTNEED) calls-- seemingly forever in a loop. I >> have not yet tracked that problem down-- next time I see it, I will >> make sure to get to the bottom of it. > > Actually the only place where madvise(MADV_DONTNEED) is called is in the > file-cache code which is used only with mmap_disable=yes. I'm not sure if this is related or not, but we set mmap_disable=yes last week and since then have seen what appears to be an occasional infinite loops. I have been trying to track down some more details before posting to the list, but here is what I have so far. There is no error logged in the dovecot log when this occurs, and it only stops by "kill -9" on the process... # top -c PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME CPU COMMAND 7832 virtual 25 0 580 496 376 R 71.5 0.0 70:59 0 imap [user(a)example.com 192.168.1.14] # lsof -p 7832 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME imap 7832 virtual cwd DIR 147,0 600 2372995 /data1/mail/ex/example.com/us/user imap 7832 virtual rtd DIR 3,3 4096 2 / imap 7832 virtual txt REG 3,3 412996 789553 /usr/libexec/dovecot/imap imap 7832 virtual mem REG 3,3 33856 771355 /usr/lib/dovecot/lib10_quota_plugin.so imap 7832 virtual mem REG 3,3 7720 771364 /usr/lib/dovecot/imap/lib11_imap_quota_plugin.so imap 7832 virtual mem REG 3,3 106912 278626 /lib/ld-2.3.2.so imap 7832 virtual mem REG 3,3 14868 278653 /lib/libdl-2.3.2.so imap 7832 virtual mem REG 3,3 1571824 278633 /lib/tls/libc-2.3.2.so imap 7832 virtual 0u IPv4 -1140164370 TCP vip.mail17a.r4.iad.mlsrvr.com:imap->director2.r2.iad.emailsrvr.com:56195 (ESTABLISHED) imap 7832 virtual 1u IPv4 -1140164370 TCP vip.mail17a.r4.iad.mlsrvr.com:imap->director2.r2.iad.emailsrvr.com:56195 (ESTABLISHED) imap 7832 virtual 2w FIFO 0,5 3154802927 pipe imap 7832 virtual 3r CHR 1,9 599160 /dev/urandom imap 7832 virtual 4r FIFO 0,5 3154802928 pipe imap 7832 virtual 5w FIFO 0,5 3154802928 pipe imap 7832 virtual 6r FIFO 0,5 3154802929 pipe imap 7832 virtual 7w FIFO 0,5 3154802929 pipe imap 7832 virtual 8u REG 22,1 11112 6602923 /var/index/data1/mail/ex/example.com/us/user/.Elementos enviados/dovecot.index imap 7832 virtual 9u REG 22,1 50824 6602903 /var/index/data1/mail/ex/example.com/us/user/.Elementos enviados/dovecot.index.log imap 7832 virtual 10u REG 147,0 3074 6346008 /data1/mail/ex/example.com/us/user/maildirsize imap 7832 virtual 11w REG 147,0 905650 7062984 /data1/mail/ex/example.com/us/user/.Elementos enviados/tmp/1171483586.P7832Q0M770594.mail17a.r4.iad.mlsrvr.com # strace -p 7832 read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable) read(0, 0x96ca1f0, 3992) = -1 EAGAIN (Resource temporarily unavailable)

2 2

[Dovecot] imap-login crash with RC19
by Nicolas STRANSKY 16 Feb '07

16 Feb '07

Hi Timo, Using RC19, I've have the following crash. If there was a core file, I've got no idea where it's gone... Jan 25 10:35:10 rouge dovecot: imap-login: file client.c: line 528 (client_unref): assertion failed: (client->refcount > 0) Jan 25 10:35:10 rouge dovecot: child 25498 (login) killed with signal 6 Best regards, -- Nico On réalise qu'une femme est de la dynamite quand on la laisse tomber. -+- Marcel Pagnol -+-

2 4

[Dovecot] Wiki to doc/ in tarball
by Timo Sirainen 16 Feb '07

16 Feb '07

So I finally started building a script that does it. Anyone interested in helping with it so that it produces readable output? First step is getting raw wiki pages. I'll do this directly by getting them from the filesystem. You can get them from here: http://dovecot.org/tmp/wikipages.tar.gz Next there's http://dovecot.org/tmp/wiki2txt.pl which is my horrible Perl script that kind of works now to produce almost readable text files. Its current output is in http://dovecot.org/tmp/wikitxt.tar.gz One thing I'm wondering about is how to make the directory layout work. For example there is "UserDatabase" and "UserDatabase/Static" pages. Currently I'm placing the latter into "_UserDatabase/Static" but I don't think that's the best solution. I was thinking about adding some "include" and "exclude" lists. If a page is in excluce list it's skipped. If it's in neither list it prints a warning but still includes it. So this makes it easy to find out the new pages and figure out if they should be included in the documentation.

3 2

[Dovecot] Index Prob
by Kevin Richter 16 Feb '07

16 Feb '07

Hi, i have a problem with rc19 (sorry, i have no time at the moment to uptime) and homedirs and maildirs mounted via NFS on Solaris10. At the beginning of the following log file everything is ok. At the end it cannot access the index... and just deleted the whole mailbox! It was empty... so it was no problem. Any ideas? Thanks. Bye, Kevin dovecot: Feb 15 21:17:52 Info: auth(default): client in: AUTH 1 PLAIN service=POP3 secured lip=147.x.x.x rip=89.x.x.x resp=<hidden> dovecot: Feb 15 21:17:52 Info: auth(default): client out: CONT 1 dovecot: Feb 15 21:17:52 Info: auth(default): client in: CONT<hidden> dovecot: Feb 15 21:17:52 Info: auth(default): client out: OK 1 user=ssal0041 dovecot: Feb 15 21:17:52 Info: auth(default): master in: REQUEST 111 2754 1 dovecot: Feb 15 21:17:52 Info: auth(default): master out: USER 111 ssal0041 system_user=ssal0041 uid=3092 gid=1100 home=/home/ssal0041 dovecot: Feb 15 21:17:52 Info: pop3-login: Login: user=<ssal0041>, method=PLAIN, rip=89.x.x.x, lip=147.x.x.x, TLS dovecot: Feb 15 21:17:52 Info: POP3(ssal0041): Effective uid=3092, gid=1100 dovecot: Feb 15 21:17:52 Info: POP3(ssal0041): mbox: data=/home/ssal0041/mail/:INBOX=/var/mail/ssal0041 dovecot: Feb 15 21:17:52 Info: POP3(ssal0041): mbox: root=/home/ssal0041/mail, index=/home/ssal0041/mail, inbox=/var/mail/ssal0041 dovecot: Feb 15 21:17:55 Error: POP3(ssal0041): Timeout while waiting for shared lock for index file /home/ssal0041/mail/.imap/INBOX/dovecot.index dovecot: Feb 15 21:19:52 Error: POP3(ssal0041): Timeout while waiting for shared lock for index file /home/ssal0041/mail/.imap/INBOX/dovecot.index dovecot: Feb 15 21:19:55 Error: POP3(ssal0041): Timeout while waiting for shared lock for index file /home/ssal0041/mail/.imap/INBOX/dovecot.index dovecot: Feb 15 21:19:55 Error: POP3(ssal0041): Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2007-02-15 21:15:55] dovecot: Feb 15 21:19:55 Info: POP3(ssal0041): No INBOX for user top=0/0, retr=0/0, del=0/0, size=0 dovecot: Feb 15 21:21:29 Info: POP3(ssal0041): Disconnected top=0/0, retr=0/0, del=0/0, size=0 dovecot: Feb 15 21:21:29 Info: POP3(ssal0041): Disconnected top=0/0, retr=0/0, del=0/0, size=0

2 2

[Dovecot] Son't have IMAPS
by Mário Gamito 16 Feb '07

16 Feb '07

Hi, I've installed dovecot and i'm pretty sure it has SSL support built in. But i don't have IMAPS. I get all sort of errors. Thunderbird tells: "The connection was refused". If i disable imaps, imap works just fine. If i enable it, none of them work. The certificates in /etc/ssl/certs and /etc/ssl/private are the same ? Any help would be appreciated. Warm Regards, Mário Gamito ## ## SSL settings ## # IP or host address where to listen in for SSL connections. Defaults # to above if not specified. ssl_listen = *:943 # Disable SSL/TLS support. #ssl_disable = no # PEM encoded X.509 SSL/TLS certificate and private key. They're opened before # dropping root privileges, so keep the key file unreadable by anyone but # root. Included doc/mkcert.sh can be used to easily generate self-signed # certificate, just make sure to update the domains in dovecot-openssl.cnf ssl_cert_file = /etc/ssl/certs/dovecot.pem ssl_key_file = /etc/ssl/private/dovecot.pem # If key file is password protected, give the password here. Alternatively # give it when starting dovecot with -p parameter. #ssl_key_password = theedge # File containing trusted SSL certificate authorities. Usually not needed. # The CAfile should contain the CA-certificate(s) followed by the matching # CRL(s). CRL checking is new in dovecot .rc1 #ssl_ca_file = # Request client to send a certificate. #ssl_verify_client_cert = no # How often to regenerate the SSL parameters file. Generation is quite CPU # intensive operation. The value is in hours, 0 disables regeneration # entirely. #ssl_parameters_regenerate = 168 # SSL ciphers to use #ssl_cipher_list = ALL:!LOW # Show protocol level SSL errors. #verbose_ssl = no ## ## Login processes ## # Directory where authentication process places authentication UNIX sockets # which login needs to be able to connect to. The sockets are created when # running as root, so you don't have to worry about permissions. Note that # everything in this directory is deleted when Dovecot is started. login_dir = /var/run/dovecot/login

2 3

[Dovecot] Dovecot forward problems
by Venilton Junior 16 Feb '07

16 Feb '07

Hi Folks, I setted up a mail server based on this how-to http://wanderingbarque.com/howtos/mailserver/mailserver.html All things are working thing as you can see in my server log. Off course, that I've suppressed some informations. postfix/smtpd[16483]: connect from unknown[myip] postfix/smtpd[16483]: 62C9034002: client=unknown[myip] postfix/cleanup[16777]: 62C9034002: message-id=<20070215182523.62C9034002@mysmtpserver> postfix/qmgr[16457]: 62C9034002: from=<me@domain>, size=360, nrcpt=1 (queue active) dovecot: auth(default_with_listener): master in: USER 1 user@domain service=deliver dovecot: auth(default_with_listener): ldap(user@domain): user search: base=dc=example,dc=com scope=subtree filter=(&(objectClass=VirtualMailAccount)(mail=user@domain)(accountActiv e=TRUE)(delete=FALSE)) fields=mail,homeDirectory dovecot: auth(default_with_listener): master out: USER 1 user@domain uid=202 gid=202 deliver(user@domain): msgid=<20070215182523.62C9034002@mysmtpserver>: saved mail to INBOX postfix/pipe[16785]: 62C9034002: to=<user@domain>, relay=dovecot, delay=12, status=sent (domain) postfix/qmgr[16457]: 62C9034002: removed This log is showing that a message was delivered to an user at my mailserver. But, at this time, I've tried to test forwarding features of postfix+dovecot+ldap. I've setted up this user entry (forwardActive=TRUE) in my ldap server. Here follows some entries that I put at my main.cf # Accounts accounts_server_host = $ldap_server_host accounts_search_base = $ldap_search_base accounts_query_filter = (&(&(objectClass=VirtualMailAccount)(mail=%s))(forwardActive=FALSE)(acco untActive=TRUE)(delete=FALSE)) accounts_result_attribute = mailbox accounts_cache = no virtual_transport = dovecot virtual_mailbox_base = /var/lib/imap/vmail/domains virtual_mailbox_maps = ldap:accounts virtual_mailbox_domains = ldap:domains virtual_minimum_uid = 202 virtual_uid_maps = static:202 virtual_gid_maps = static:202 virtual_alias_maps = ldap:aliases, ldap:virtualforward home_mailbox = Maildir/ # aliases aliases_server_host = $ldap_server_host aliases_search_base = $ldap_search_base aliases_query_filter = (&(&(objectClass=VirtualMailAlias)(mail=%s))(forwardActive=FALSE)(accoun tActive=TRUE)(delete=FALSE)) aliases_result_attribute = maildrop aliases_cache = no aliases_bind_dn = $ldap_bind_dn aliases_bind_pw = $ldap_bind_pw accountsmap_server_host = $ldap_server_host accountsmap_search_base = $ldap_search_base accountsmap_query_filter = (&(&(objectClass=VirtualMailAccount)(mail=%s))(forwardActive=FALSE)(acco untActive=TRUE)(delete=FALSE)) accountsmap_result_attribute = mail accountsmap_cache = no # Domains domains_server_host = $ldap_server_host domains_search_base = $ldap_search_base domains_query_filter = (&(objectClass=VirtualDomain)(vd=%s)(accountActive=TRUE)(delete=FALSE)) domains_result_attribute = vd domains_bind = no domains_scope = one # VirtualForward virtualforward_server_host = $ldap_server_host virtualforward_search_base = $ldap_search_base virtualforward_query_filter = (&(&(objectClass=VirtualMailAccount)(mail=%s))(forwardActive=TRUE)(accou ntActive=TRUE)(delete=FALSE)) virtualforward_result_attribute = maildrop virtualforward_cache = no virtualforward_bind_dn = $ldap_bind_dn virtualforward_bind_pw = $ldap_bind_pw Any guesses or misconfiguration? I don't have an idea of how can I debug to get the error. Looking forward to get some clues and helps :P Best Regards Venilton C. Junior

2 1

[Dovecot] I keep getting password mismatches
by Mark 16 Feb '07

16 Feb '07

Hey, This is the debug information: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=127.0.0.1 rip=127.0.0.1 resp=AG1hcmsAbWFyaw==auth(default): passwd(mark,127.0.0.1): password mismatchauth(default): client out: FAIL 1 user=markimap-login: Disconnected: user=<mark>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured The strange thing is that i can login with ssh using my username and password but i can`t do anything related to dovecot.. i`m using a default .conf file with auth method set as plain and the supported protocols are set to pop and imap.. anyone that could help me with this? Thanx in favor. _________________________________________________________________ Probeer Live.com: je eigen persoonlijke opstartpagina met alleen de dingen die jij belangrijk vindt op één plek. http://www.live.com/getstarted

3 2

[Dovecot] Is it 1.0 yet?
by Marc Perkel 15 Feb '07

15 Feb '07

OK - my last main bug was fixed a few releases ago. I know that there's no end to getting things right but there comes a point when you need to call it done. No one trusts a 1.0 to be perfect but Dovecot is already better that most 2.0 versions of other software. I vote (as if my vote counted) to call it done, declare victory, and move on to 1.01, 1.02 etc. No one is going to trus it till it gets to 1.02 so I say lets bless it and move on.

15 22

[Dovecot] 1.0.rc22 released
by Timo Sirainen 15 Feb '07

15 Feb '07

http://dovecot.org/releases/dovecot-1.0.rc22.tar.gz http://dovecot.org/releases/dovecot-1.0.rc22.tar.gz.sig Found another bad bug in rc19 changes. Wonder why my imaptest catched the bug only in CVS HEAD but not in branch_1_0 even though both had it. Anyway, now the imaptest runs nicely for both, and I'm again optimistic that the bug count is low enough for v1.0 to be released soon :) BTW. My previous benchmarks which showed how mmap_disable=yes and fsync_disable=yes give huge performance benefits are pretty XFS-specific. I did some quick tests with ext3 and the differences were quite small with it. I'll probably do another proper run of tests later. + pop3: Commit the transaction even if client didn't QUIT so cached data gets saved. - Fixed another indexing bug in rc19 and later which caused transactions to be skipped in some situations, causing all kinds of problems. - mail_log_max_lines_per_sec was a bit broken and caused crashes with dovecot -a - BSD filesystem quota was counted wrong. Patch by Manuel Bouyer - LIST: If namespace has a prefix and inbox=no, don't list prefix.inbox if it happens to exist when listing for %.

8 22

[Dovecot] Sieve Vacation virtual support?
by Charles Marcus 15 Feb '07

15 Feb '07

Hello, I'm wanting to enable vacation messages for my users on a new dovecot server that I'm playing with, but want to know if the Dovecot LDA+Sieve vacation message function http://wiki.dovecot.org/LDA/Sieve will work with virtual users? For security reasons, I only want to use virtual domains/users. Thanks... -- Best regards, Charles

2 4

[Dovecot] strange LDA error
by Farkas Levente 15 Feb '07

15 Feb '07

hi, i try to use dovecot lda with postfix virtual delivery, but i've got error. the maildirs are created ie: new/, tmp/, curr/, dovecot.index, dovecot.index.log, .dovecot.lda-dupes. but the mail is not placed into it and got and error: "save failed to INBOX". what can be the reason? thank you for your help in advance. yours. --------------------------------- # ls -ald /var/vmail/ drwxrwx--- 3 vmail mail 4096 Feb 15 14:08 /var/vmail/ --------------------------------- this's the relevant part my dovecot.conf: --------------------------------- mail_location = maildir:/var/vmail/%d/%u mail_extra_groups = mail mail_debug = yes mmap_disable = yes first_valid_uid = 101 last_valid_uid = 101 maildir_copy_with_hardlinks = yes protocol lda { mail_plugins = quota log_path = /var/log/dovecot-deliver.log info_log_path = /var/log/dovecot-deliver.log } auth_verbose = yes auth_debug = yes auth_debug_passwords = yes auth default { mechanisms = plain passdb sql { args = /etc/dovecot/sql.conf } userdb sql { args = /etc/dovecot/sql.conf } userdb prefetch { } user = nobody socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = vmail group = mail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = mail } } } --------------------------------- this is the log in maillog: --------------------------------- Feb 15 14:08:03 alpha postfix/pickup[15447]: 14C61F4D34: uid=0 from=<root> Feb 15 14:08:03 alpha postfix/cleanup[15614]: 14C61F4D34: message-id=<20070215130803.14C61F4D34(a)alpha.lenux.hu> Feb 15 14:08:03 alpha postfix/qmgr[15448]: 14C61F4D34: from=<root(a)alpha.lenux.hu>, size=295, nrcpt=1 (queue active) Feb 15 14:08:03 alpha dovecot: auth(default): master in: USER 1 attaba(a)balazsiek.hu service=deliver Feb 15 14:08:03 alpha dovecot: auth-worker(default): mysql: Connected to localhost (postfix) Feb 15 14:08:03 alpha dovecot: auth-worker(default): sql(attaba(a)balazsiek.hu): SELECT concat('/var/vmail/', maildir) as home, concat('maildir:/var/vmail/', maildir) as mail, 101 A S uid, 12 AS gid, concat('dirsize:storage=', quota) AS quota FROM mailbox WHERE username = 'attaba(a)balazsiek.hu' AND active = '1' Feb 15 14:08:03 alpha dovecot: auth(default): master out: USER 1 attaba(a)balazsiek.hu home=/var/vmail/balazsiek.hu/attaba/ mail=maildir:/var/vmail/balazsiek.hu/attaba / uid=101 gid=12 quota=dirsize:storage=0 Feb 15 14:08:03 alpha postfix/sendmail[15620]: running: PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin? xxgdb /usr/libexec/postfix/sendmail 15620 & sleep 5 Feb 15 14:08:08 alpha postfix/pickup[15447]: 51183F4D36: uid=101 from=<> Feb 15 14:08:08 alpha postfix/cleanup[15614]: 51183F4D36: message-id=<dovecot-1171544883-208651-0(a)alpha.lenux.hu> Feb 15 14:08:08 alpha postfix/pipe[15617]: 14C61F4D34: to=<attaba(a)balazsiek.hu>, relay=dovecot, delay=5.3, delays=0.17/0.01/0/5.1, dsn=2.0.0, status=sent (delivered via dovecot se rvice) Feb 15 14:08:08 alpha postfix/qmgr[15448]: 14C61F4D34: removed Feb 15 14:08:08 alpha postfix/qmgr[15448]: 51183F4D36: from=<>, size=1558, nrcpt=1 (queue active) Feb 15 14:08:08 alpha postfix/cleanup[15614]: 64127F4D33: message-id=<dovecot-1171544883-208651-0(a)alpha.lenux.hu> Feb 15 14:08:08 alpha postfix/qmgr[15448]: 64127F4D33: from=<>, size=1687, nrcpt=1 (queue active) Feb 15 14:08:08 alpha postfix/local[15627]: 51183F4D36: to=<root(a)alpha.lenux.hu>, relay=local, delay=0.21, delays=0.13/0.01/0/0.07, dsn=2.0.0, status=sent (forwarded as 64127F4D33 ) Feb 15 14:08:08 alpha postfix/qmgr[15448]: 51183F4D36: removed Feb 15 14:08:08 alpha postfix/smtp[15628]: 64127F4D33: to=<lfarkas(a)bppiac.hu>, orig_to=<root(a)alpha.lenux.hu>, relay=mx3.mail-server.hu[212.24.171.194]:25, delay=0.13, delays=0.07/ 0.04/0/0.01, dsn=2.0.0, status=sent (250 Ok: queued as 80C4937650E) Feb 15 14:08:08 alpha postfix/qmgr[15448]: 64127F4D33: removed --------------------------------- this's in dovecot-deliver.log: --------------------------------- deliver(attaba(a)balazsiek.hu): Feb 15 14:08:03 Info: auth input: attaba(a)balazsiek.hu deliver(attaba(a)balazsiek.hu): Feb 15 14:08:03 Info: auth input: home=/var/vmail/balazsiek.hu/attaba/ deliver(attaba(a)balazsiek.hu): Feb 15 14:08:03 Info: auth input: mail=maildir:/var/vmail/balazsiek.hu/attaba/ deliver(attaba(a)balazsiek.hu): Feb 15 14:08:03 Info: auth input: uid=101 deliver(attaba(a)balazsiek.hu): Feb 15 14:08:03 Info: auth input: gid=12 deliver(attaba(a)balazsiek.hu): Feb 15 14:08:03 Info: auth input: quota=dirsize:storage=0 deliver(attaba(a)balazsiek.hu): Feb 15 14:08:03 Info: Home dir not found: /var/vmail/balazsiek.hu/attaba/ deliver(attaba(a)balazsiek.hu): Feb 15 14:08:03 Info: Loading modules from directory: /usr/lib64/dovecot/lda deliver(attaba(a)balazsiek.hu): Feb 15 14:08:03 Info: Module loaded: /usr/lib64/dovecot/lda/lib10_quota_plugin.so deliver(attaba(a)balazsiek.hu): Feb 15 14:08:03 Info: maildir: data=/var/vmail/balazsiek.hu/attaba/ deliver(attaba(a)balazsiek.hu): Feb 15 14:08:03 Info: maildir: root=/var/vmail/balazsiek.hu/attaba, index=/var/vmail/balazsiek.hu/attaba, control=, inbox= deliver(attaba(a)balazsiek.hu): Feb 15 14:08:03 Info: dirsize quota limit = 0kB deliver(attaba(a)balazsiek.hu): Feb 15 14:08:03 Info: msgid=<20070215130803.14C61F4D34(a)alpha.lenux.hu>: save failed to INBOX --------------------------------- -- Levente "Si vis pacem para bellum!"

2 1

[Dovecot] selective logging
by T. Horsnell 15 Feb '07

15 Feb '07

>From the wiki: log_path = Use this logfile instead of syslog(). /dev/stderr can be used if you want to use stderr for logging (ONLY /dev/stderr - otherwise it is closed). (I dont understand the above references to the use of stderr) info_log_path = For informational messages, use this logfile instead of the default (What exactly is an informational message, and what is the default?) Can I selectively suppress logging like: Feb 5 11:52:15 ls1 imap(iamelel): File isn't in mbox format: /gfg0/iamelel//claudia/ligplot/NQ10/ligplot.bonds Or do I have to turn off logging entirely? Thanks, Terry.

2 1

[Dovecot] maildir and the separator for subfolder
by David Bonnafous 15 Feb '07

15 Feb '07

hi, I use dovecot 1.0rc15 with one maildir namespace. I'd like to be able to use '.' in folders and subfolders name. So, I setup the default namespace with separator =':' But, when I create some folders and then subfolders with thunderbird the filename one the server are named with some '.' no ':'... It seems that dovecot always interprets '.' as a separator for folders. Is-it a bug ? yours, -- David Bonnafous Institut de Mathématiques Université Paul Sabatier Toulouse - France

4 5

[Dovecot] [Fwd: Compiler warnings]
by Stephen Lee 15 Feb '07

15 Feb '07

Hi, I'm resubmitting the message below hoping it gets a response this time. Thanks, Stephen -------- Forwarded Message -------- > From: Stephen Lee <splee(a)plexio.com> > To: dovecot(a)dovecot.org > Subject: [Dovecot] Compiler warnings > Date: Thu, 08 Feb 2007 08:27:48 -0800 > > Hi, > > I'm trying to install Dovecot 1.0RC22 on an old Trustix 1.5 box and am > getting the compiler warnings: > > quota-storage.c:275: warning: pointer of type `void *' used in > arithmetic > > convert-storage.c:50: warning: pointer of type `void *' used in > arithmetic > > acl-backend-vfile.c:212: warning: pointer of type `void *' used in > arithmetic > > There are many more of these pointer warnings in the various modules > when compiling. Is this a problem? > > Thanks, > Stephen >

3 3

[Dovecot] deliver LDA permission problem
by Dick Middleton 15 Feb '07

15 Feb '07

Hello, I'm trying to get deliver LDA working with postfix in a virtual domain configuration. I'm using dovecot v1.0.rc10. My setup is pretty much exactly as in the wiki (only the path to deliver and auth-master socket are different). I'm having a little problem with permissions and this occurred which I think is undesirable: syslog: Feb 8 13:09:35 deliver(<email-addr>): setgid(5002) failed: Operation not permitted Feb 8 13:09:36 deliver(<email-addr>): setgid(5001) failed: Operation not permitted mail.log: Feb 8 13:09:36 Devil postfix/pipe[9622]: 5AD5C103C: to=<<email-addr>>, orig_to=<<email-addr>>, relay=dovecot, delay=0.05, delays=0.01/0/0/0.04, dsn=5.3.0, status=bounced (Command died with status 89: \"/usr/libexec/dovecot/deliver\") When deliver fails because it can't connect to auth-master socket it returns an undeliverable status which causes postfix to defer delivery. I think it should do the same here. The real question is how I give deliver the permission to do the setgid? Is it enough to just add user vmail to each of the virtual user groups in /etc/group. Does deliver setuid to virtual user as well? Dick

3 4

[Dovecot] dict quota not being updated for all users when receiving a multi-recipient message
by Justin McAleer 15 Feb '07

15 Feb '07

I've set up a mysql quota dictionary using the proxy setup as described in the wiki (using Dovecot lda). When I send a single message to multiple users, only the first recipient is getting their usage updated. This behavior occurs if I manually send to more than one user via the To: line, or via aliases set up in postfix. I do have dovecot_destination_recipient_limit set to 1. I don't even have a guess as to what might be going on here, since each instance of the lda is a separate process. But, let me know if anybody has any ideas or requests for more info.

2 2

[Dovecot] sieve plugin
by pod 15 Feb '07

15 Feb '07

I'm currently looking at dovecot for a large-scale deployment. The requirements will almost certainly mean we would use the dovecot lda with the sieve plugin. The current method of distribution causes (binary distro) packaging to be slightly awkward IMHO. The dovecot-sieve code needs to be told where an in-tree build of dovecot lives. The fact that it _must_ be an in-tree build I was considering as a bug; the dovecot-sieve build wants to access both '.a' and '.h' files from the dovecot build but in an out-of-tree build these are in different places. My first thoughts were to simply move the dovecot-sieve code into the dovecot tree (I imagine under src/plugins/cmusieve or similar) and rework the autoconf setup as appropriate. This sidesteps the problem for this case but does not help other 'third party' dovecot plugins. If however a simple plugin build environment were to exist as part of a dovecot install then plugins could be distributed and built as independent packages. I quite understand that this additionally burdens dovecot development with 'stable API' concerns which may not be considered worth the effort. Timo: have you thought about any of the above and if so which direction have your thoughts taken you? I can justify spending a small amount of time to develop this into real code but it would be a waste to fight against or duplicate existing effort that has gone into this area. All comments welcome.

2 1

[Dovecot] leaking file descriptors? imap-login: inotify_init() failed
by Dale Bewley 15 Feb '07

15 Feb '07

Even though the system is configured to allow a large number of open files, and tools such as lsof tell me dovecot is within that limit; I am seeing errors like this pretty frequently. dovecot: imap-login: inotify_init() failed: Too many open files I'm running Fedora Core 5 (2.6.18-1.2257.fc5 SMP x86_64) with dovecot-1.0-1.rc15 built from the FC6 SRPM, but I was seeing the same thing with 1.0-0.beta8.3.fc5 (one of the reasons for the jump to the FC6 ver). # system default limit is very high, and we aren't approaching it [root@mail 2496]# cat /proc/sys/fs/file-max 738223 [root@mail fs]# cat file-nr 8704 0 738223 # the limit per user is 1024 [root@mail 2496]# su -c 'ulimit -n' dlbewley 1024 # But dovecot doesn't appear to be above that. # it looks like the master process is well below that [root@mail 2496]# lsof -p `cat /var/run/dovecot/master.pid` | wc -l 280 # but overall, this user has way more than that [root@mail fs]# lsof -nu dovecot |wc -l 3145 So, I raised the limit for dovecot to 5000 soft and 10000 hard to see if it would make a difference. Even after a reboot, the next day the errors returned. Today login_process_per_connection is set to 'no' rather than the default to see if it makes a difference. So far today, no errors. Config looks like this: protocols = imap imaps pop3 pop3s ssl_cert_file = /usr/share/ssl/certs/mail.cert ssl_key_file = /usr/share/ssl/private/mail.key disable_plaintext_auth = no login_process_per_connection = no max_mail_processes = 2048 protocol imap { } protocol pop3 { } auth_username_chars = auth_master_user_separator = * auth default { mechanisms = plain passdb passwd-file { args = /etc/dovecot/dovecot.masterusers master = yes pass = no } passdb pam { } userdb passwd { } user = root } plugin { } -- Dale Bewley - Unix Administrator - Shields Library - UC Davis GPG: 0xB098A0F3 0D5A 9AEB 43F4 F84C 7EFD 1753 064D 2583 B098 A0F3

2 1

[Dovecot] POP3-Proxy error
by Christian Froemmel 15 Feb '07

15 Feb '07

Hi, as mentioned in another thread I discovered a crash in the pop3-proxy. It occurs when the remote-pop3-server just drops the connection (in my case courier was hitting the MAXPERIP-Limit). I don't have a corefile yet, but will try to get one. Here the message from the dovecot.log: dovecot: Feb 02 09:30:00 Error: pop3-login: file pop3-proxy.c: line 20 (proxy_input): assertion failed: (!client->destroyed) dovecot: Feb 02 09:30:00 Error: pop3-login: Raw backtrace: pop3-login [0x8052fe0] -> pop3-login [0x8052ab4] -> pop3-login(vfprintf+0x2324) [0x804c6fc] -> pop3-login(vfprintf+0x2c9a) [0x804d072] -> pop3-login(vfprintf+0x1086) [0x804b45e] -> pop3-login(vfprintf+0x29d0) [0x804cda8] -> pop3-login [0x8056346] -> pop3-login [0x8055849] -> pop3-login(vfprintf+0x39d6) [0x804ddae] -> /lib/i686/libc.so.6(__libc_start_main+0xc7) [0x4015bd17] -> pop3-login(SSL_write+0x49) [0x804a931] dovecot: Feb 02 09:30:00 Error: child 5985 (login) killed with signal 6 It seems that the unexpected shutdown of the connection confuses dovecot. When I increased the MAXPERIP-limit in courier the crashes went away. regards, Christian -- SYSTEM CONCEPT GmbH

2 1

[Dovecot] master user
by Tom Bombadil 15 Feb '07

15 Feb '07

Greetings all... We are thinking about using the master DB, so a few admins can impersonate an ordinary user. So, we want to define one master for a set of users. And this administrator cannot be master of the other users? Can this be done somehow? Reading the docs, it seems that if a user is defined as master, it can login as everyone. Thanks for any hint.

4 3

[Dovecot] Startup errors
by Steven F Siirila 15 Feb '07

15 Feb '07

I just finished setting up a test Dovecot server (1.0-rc15, Solaris 10) and noticed upon start of Dovecot (after rebooting the server) that the imap-login and pop3-login processes spew errors as follows, which I can only assume is due to the fact that dovecot-auth has not fully initialized yet... it seems to me that these login processes are getting started too early, or should at least be waiting for dovecot-auth to get started. Jan 31 15:55:06 hostname dovecot: Dovecot v1.0.rc15 starting up Jan 31 15:55:07 hostname dovecot: imap-login: Can't connect to auth server at default: Connection refused Jan 31 15:55:07 hostname dovecot: pop3-login: Can't connect to auth server at default: Connection refused Jan 31 15:55:07 hostname dovecot: imap-login: Can't connect to auth server at default: Connection refused Jan 31 15:55:07 hostname last message repeated 1 time Jan 31 15:55:07 hostname dovecot: pop3-login: Can't connect to auth server at default: Connection refused Jan 31 15:55:07 hostname last message repeated 1 time Jan 31 15:55:07 hostname dovecot: imap-login: Can't connect to auth server at default: Connection refused Jan 31 15:55:07 hostname last message repeated 9 times Jan 31 15:55:07 hostname dovecot: pop3-login: Can't connect to auth server at default: Connection refused Jan 31 15:55:07 hostname last message repeated 9 times -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

2 1

[Dovecot] Q on configuring shared mboxes
by Mikhail Teterin 15 Feb '07

15 Feb '07

Hello! I have the following three types of mailboxes on my server: 1) Regular user mail /var/mail/<user> in mbox format 2) Suspected spam in /var/tmp/spamprobe in mbox format 3) Archived mailing list in /home/mks/mksarch in mbox format I want the 1) to be only accessible to the respective <user>, obviously (POP3 and/or IMAP4). I wanted the 2) to be accessible to all users -- and I want them to be able to move stuff out of it into their own mboxes (IMAP4 is enough). I want the 3) to be accessible _read only_ to anyone, who enters the correct username/password (preferably -- without creating a special Unix account). (IMAP4 or POP3) So far, I have only been able to achieve 1). Could someone, please, help me configure dovecot for the 2) and the 3)? Thanks! -mi

2 1

[Dovecot] Dovecot ACL
by Barry Kwok 15 Feb '07

15 Feb '07

I am using 1.0-rc19 version. I made a global ACL file in /etc/dovecot-acls/Public as: owner lrsi user=manager rl The owner cannot delete/move mail inside his Public folder as I want. But the user "manager" cannot subscribe/view to other's Public folder. What I have missed?

2 1

[Dovecot] lda sieve broken after upgrade
by lenny＠edpausa.com 15 Feb '07

15 Feb '07

upgraded to rc19. using maildirs. solaris 9/cc. removed all modules from pop/imap/lda subdirs and first upgraded dovecot to rc19 and then used dovecot-sieve-1.0.1 sources to build against the dovecot source directory ( everything now builds nicely on Solaris, thank you Timo ). added "cmusieve" to the list of plugins used by lda. ail_plugins = cmusieve now getting this: deliver(lenny): Error: dlopen(/usr/local/dovecot/lib/dovecot/lda//lib90_cmusieve_plugin.so) failed: ld.so.1: deliver: fatal: relocation error: file /usr/local/dovecot/lib/dovecot/lda//lib90_cmusieve_plugin.so: symbol deliver_mail: referenced symbol not found anyone ? on the same machine, mbox based dovecot rc19 with dovecot ( sieve ) lda, works and upgraded without any issues, although the prior version must have been different, since the cmusieve statement was already present.

2 2

[Dovecot] Hello, new to the list
by Vikram Goyal 15 Feb '07

15 Feb '07

Hello Guys! I have just joined the list as I needed some clarifications, help etc. I am not sure what I want is possible and I have been unable to do it myself, read lots of dovecot wiki pages, debian lists, dovecot archives, experimented myself and so on. I have a mail dir ~/Mail where all my mails get distributed to their respective folders through procmail filters. The heirarchy is as follows: ~/Mail/ /inbox --> maildir /trash --> trash maildir /newsletter --> mbox lists/ --> normal dir /dovecot --> dovecot list maildir /some other list maildirs I wanted to access them through dovecot. I have tried namespaces etc but have been unable to accomplish till now. Kindly help. Thanks! -- vikram... |||||||| |||||||| ^^'''''^^||root||^^^'''''''^^ // \\ )) //(( \\// \\ // /\\ || \\ || / )) (( \\ -- o ~|~ = Registered Linux User #285795

3 3

[Dovecot] sieve question
by Xueron Nee 15 Feb '07

15 Feb '07

hi, I am testing deliver with sieve support, and want to use it to filter chinese. But I found it doesn't work. an encoded subject: =?GB2312?B?aSBhbSBhIGNoaW5lc2U=?= decoded content is: i am a chinese and i have such rules: require "fileinto"; if header :contains "Subject" "GB2312" { fileinto "Hello"; } if header :contains "Subject" "chinese" { fileinto "Trush"; } but the first one acts. if a delete the first rule, like this: require "fileinto"; if header :contains "Subject" "chinese" { fileinto "Trush"; } message was delived to INBOX. so, any help? Thanks! -- Xueron Nee <xueron(a)gmail.com>

2 1

[Dovecot] auto-detection of user mailbox type - followup
by John Harper 15 Feb '07

15 Feb '07

In http://www.dovecot.org/list/dovecot/2006-December/018253.html Timo Sirainen wrote > > You can still change NAMESPACE_* environments. I don't remember how > exactly now, but you can do eg. "set > /tmp/sets" in the script, see > what it has set and modify them in the script. in response to my query regarding setting the mail_location in namespaces from a mail_executable script. The purpose of this is to be able to select on a per-user basis whether they're using Maildir or mbox format (I don't want to convert 12000 users all at once, and some users have no need or desire to change formats - they still use mail/elm etc) and also have the UW-IMAP compatibility namespaces to take care of all the clients currently configured with imap server directory = mail/. This all works, with one small bug left. For reference, here's the gist: In the dovecot.conf file place the usual namespace directives following the Namespaces wiki: namespace private { separator = / prefix = inbox = yes } #for UW backwards compatibility: namespace private { separator = / prefix = mail/ hidden = yes } namespace private { separator = / prefix = ~/mail/ hidden = yes } namespace private { separator = / prefix = ~%u/mail/ hidden = yes } define the mail_executable under protocol imap: mail_executable = /usr/local/dovecot/lbin/imap.sh and write the imap.sh script: ------start imap.sh--------------------------------------------------- #!/bin/sh # determine if user is in mbox or Maildir mode # Maildir takes precedence and is identified by the existence of # both a .procmailrc recipe and the Maildir directory. # Without a .procmailrc file, there's no recipe to force delivery in # Maildir format, so any existing Maildir is spurious # The .procmailrc should contain DEFAULT=Maildir/ # Set the absolute path to this script as the mail_executable for # the imap protocol in dovecot.conf. # It appears that this script is run as the user in their home dir if [ -f .procmailrc -a -d Maildir ]; then MAIL='maildir:~/Maildir'; export MAIL else MAIL='mbox:~/mail:INBOX=~/.mail'; export MAIL fi # each namespace defined in the conf file needs to have the mail # location defined which is set in environment vars # NAMESPACE_1 etc NAMESPACE_1=$MAIL; export NAMESPACE_1 NAMESPACE_2=$MAIL; export NAMESPACE_2 NAMESPACE_3=$MAIL; export NAMESPACE_3 NAMESPACE_4=$MAIL; export NAMESPACE_4 #debugging to see what else we can play with #set >> /tmp/d exec /usr/local/dovecot/libexec/dovecot/imap ------end imap.sh----------------------------------------------------- However, it appears that the root dir '~/mail' string is used at some point before the tilde-expansion takes place. I see a literal ~ directory in the users home, with an empty mail directory inside. After that it picks up the proper location and works correctly. I tried a %h and got a literal %h directory. So for now I made a simple workaround by using the absolute path to the home directory: # use home variable (depends on this script running in users home) # During startup it seems like ~/mail is interpreted as a string and # a spurious ~ folder is created, before the ~ is expanded home=`/bin/pwd` if [ -f .procmailrc -a -d Maildir ]; then MAIL="maildir:$home/Maildir"; export MAIL else MAIL="mbox:$home/mail:INBOX=$home/.mail"; export MAIL fi Thanks, John Harper ------------------------------------------------- Senior Systems Administrator Information and Instructional Technology Services University of Toronto Scarborough harper(a)utsc.utoronto.ca

2 1

[Dovecot] dovecot and libnss-ldap
by Nicolas Boullis 15 Feb '07

15 Feb '07

Hi, I've been using dovecot 0.99.14 for a few years, with libpam-ldap and libnss-ldap, and never experienced any problem with those. I expect to soon switch to dovecot 1.0rc15 (or whatever gets available in Debian Etch, hopefuly dovecot 1.0), but I've seen some warnings against dovecot+libnss-ldap... Is the problem with libnss-ldap a recent problem (I mean it was not a problem with older dovecot such as my 0.99.14)? Is it still a problem even with 1.0rc22? Is there any hope to have it fixed before 1.0? Note that while most of the users I have to deal with are in my LDAP directory, a few ones are not and are in /etc/passwd. Hence, "userdb ldap" is probably not an option for me (and I'm quite happy with configuring all my servers with PAM and NSS). Cheers, Nicolas

2 6

[Dovecot] who limit the process deliver number?
by Antonio Casado Rodríguez 15 Feb '07

15 Feb '07

Hi, i have postfix-2.3.6, dovecot-1.0-rc19 and dovecot-lda Where i limit the process number deliver, in postfix or dovecot.conf Thanks.

2 1

[Dovecot] DoveCot compression to save HDD space
by Host Expert 15 Feb '07

15 Feb '07

Hello, I am wondering if there are any possibilities to save HDD space used by emails by compressing content (not just attachements). It would be many 1000s email boxes and probably each using lot of space so would be easier if we can just compress emails somehow. Thanks, Cristian

12 28

[Dovecot] Last login fields
by Dean Manners 15 Feb '07

15 Feb '07

Hey guys, Wondering if anyone has tried to do this before - a last login timestamp field. Using mysql for auth, I figured it would be easy enough to add a timestamp field and then tack an UPDATE statement on the end of the password_query. But of course, dovecot sees this as only one statement to pass to MySQL - of which MySQL barfs at.. Any ideas on how to achieve this ? Regards __________________________________________ Dean Manners

2 2

[Dovecot] Dovecot not responding
by Andrew Hoag 15 Feb '07

15 Feb '07

Hi all, I'm pulling my hair out on this problem and wanted to throw it out there to see if anyone else had run across it. I recently restarted my server. There were some network config issues that caused the interfaces not to come back up, but my colo company got those resolved. However, after restart, my IMAPS server has stopped responding to outside requests. I can successfully access IMAP from localhost, as well as via SSH tunnelling, so I know it is working. I've tried all sorts of "listen=" configurations, and checked lsof & tcpdump to rule out other problems, but it just seems as though dovecot isn't responding. TCPDUMP (notice the TCP SYN but no response): /var/log 89# tcpdump -vvs 192 port 993 tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 192 bytes 17:37:54.101518 IP (tos 0x0, ttl 112, id 56543, offset 0, flags [DF], length: 48) c-24-9-151-115.hsd1.co.comcast.net.3132 > mail.server.com.imaps: S [tcp sum ok] 1828791628:1828791628(0) win 16384 <mss 1460,nop,nop,sackOK> 17:37:58.282840 IP (tos 0x0, ttl 59, id 54721, offset 0, flags [DF], length: 60) dsl001-148-165.sfo1.dsl.speakeasy.net.39250 > mail.server.com.imaps: S [tcp sum ok] 3827175783:3827175783(0) win 5840 <mss 1460,sackOK,timestamp 1555809446 0,nop,wscale 2> 17:38:00.130267 IP (tos 0x0, ttl 112, id 56548, offset 0, flags [DF], length: 48) c-24-9-151-115.hsd1.co.comcast.net.3132 > mail.server.com.imaps: S [tcp sum ok] 1828791628:1828791628(0) win 16384 <mss 1460,nop,nop,sackOK> 17:38:01.283013 IP (tos 0x0, ttl 59, id 54722, offset 0, flags [DF], length: 60) dsl001-148-165.sfo1.dsl.speakeasy.net.39250 > mail.server.com.imaps: S [tcp sum ok] 3827175783:3827175783(0) win 5840 <mss 1460,sackOK,timestamp 1555810196 0,nop,wscale 2> LSOF: /var/log 91# lsof -i | grep imap sshd 4475 andrew 11u IPv4 39601 TCP localhost:34661->localhost:imaps (ESTABLISHED) dovecot 6540 root 5u IPv4 38988 TCP *:imaps (LISTEN) imap-logi 6599 dovecot 9u IPv4 39602 TCP localhost:imaps->localhost:34661 (ESTABLISHED) imap-logi 6629 dovecot 1u IPv4 38988 TCP *:imaps (LISTEN) imap-logi 6630 dovecot 1u IPv4 38988 TCP *:imaps (LISTEN) NETSTAT: /var/log 92# netstat -an | grep 993 tcp 0 0 0.0.0.0:993 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:993 127.0.0.1:34661 ESTABLISHED tcp 0 0 127.0.0.1:34661 127.0.0.1:993 ESTABLISHED STRACE: 17:00:33.225030 gettimeofday({1171501233, 225048}, {480, 0}) = 0 17:00:33.225072 gettimeofday({1171501233, 225090}, NULL) = 0 17:00:33.225113 poll([{fd=7, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=3, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=1, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 4, 0) = 0 17:00:33.225163 gettimeofday({1171501233, 225182}, {480, 0}) = 0 17:00:33.225212 gettimeofday({1171501233, 225230}, NULL) = 0 17:00:33.225260 poll([{fd=7, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=3, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=1, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 4, 999) = 0 17:00:34.225145 gettimeofday({1171501234, 225179}, {480, 0}) = 0 17:00:34.225204 gettimeofday({1171501234, 225222}, NULL) = 0 17:00:34.225246 poll([{fd=7, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=3, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=1, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 4, 0) = 0 17:00:34.225297 gettimeofday({1171501234, 225315}, {480, 0}) = 0 Has anyone seen this behavior? What's the obvious thing I'm missing here? My host has some weird VLAN thing installed by the colo company so I have IP aliases, but given I'm not even seeing a response to the SYN, it doesn't seem to be a routing issue, and I can connect to my local interface on port 993 (NOT localhost) without problems. Suggestions much appreciated, I'm stuck. I'm sure this is something obvious and simple, but I'm looking past it right now. Andrew -- Email: andrew(a)50degreescorp.com <mailto:andrew@50degreescorp.com>

2 1

[Dovecot] OT: looking for plugin developer
by Tom Bombadil 15 Feb '07

15 Feb '07

Greetings all, We are looking for a developer to write a plugin that copies the message to a specific hidden folder called "spam_copy" when a message inside a folder called "spam" is viewed for the first time. And when we move the message from the "spam" folder to any other folder, and if the message hasn't been seen, we should send a copy of it to "spam_copy" hidden folder, in addition to the move. If anybody is up for it, please send me a private message, so we can arrange all the details, payment, etc... Thanks in advance.

1 0

[Dovecot] Changing the Seen Flags
by Amardeep Singh 15 Feb '07

15 Feb '07

Hi , Can we change the setting on dovecot so that the Seen mail flag S should be saved where everybody can see that and not in the dovecot.index file As we are facing problems with public folder read/unread mails. Any help is appreciated Thanks, Amardeep

3 5

[Dovecot] incorrect quota reporting with dict quota
by Marshal Newrock 14 Feb '07

14 Feb '07

Using the dict quota with dovecot-1.0.rc21, quota reporting was incorrect. It wasn't just that the stored quota was different than the disk usage, but also that each time the quota was checked, it was greater than before, even if no mail was received. I tested this by using telnet to log into an imap account, and issuing multiple "getquotaroot inbox" commands. I have changed to just using maildir quotas, and everything seems correct now. Thanks to dovecot's flexible authentication methods, I'll be able to set an individual account to use the dict quota backend for testing. -- Marshal Newrock, Ideal Solution LLC http://www.idealso.com

2 1

[Dovecot] lda quota in sql works but is ignored
by Robert Schetterer 14 Feb '07

14 Feb '07

Hi, (dovecot latest vers) i have lda deliver up with quota and sql, but it seems that deliver simply ignores it, normally it should bounce the message deliver(tester(a)example.de): Feb 13 15:31:32 Info: auth input: gid=1001 deliver(tester(a)example.de): Feb 13 15:31:32 Info: auth input: quota=dirsize:storage=3072000 deliver(tester(a)example.de): Feb 13 15:31:32 Info: Home dir not found: /usr/local/virtual/tester(a)example.de/ deliver(tester(a)example.de): Feb 13 15:31:32 Info: Loading modules from directory: /usr/lib64/dovecot/modules/lda deliver(tester(a)example.de): Feb 13 15:31:32 Info: Module loaded: /usr/lib64/dovecot/modules/lda/lib10_quota_plugin.so deliver(tester(a)example.de): Feb 13 15:31:32 Info: Module loaded: /usr/lib64/dovecot/modules/lda/lib90_cmusieve_plugin.so deliver(tester(a)example.de): Feb 13 15:31:32 Info: maildir: data=/usr/local/virtual/tester(a)example.de/ deliver(tester(a)example.de): Feb 13 15:31:32 Info: maildir: root=/usr/local/virtual/tester(a)example.de, index=/usr/local/virtual/tester(a)example.de, control=, inbox= deliver(tester(a)example.de): Feb 13 15:31:32 Info: dirsize quota limit = 3072000kB deliver(tester(a)example.de): Feb 13 15:31:32 Info: msgid=<20070213143132.012C982EF(a)mail.example.de>: saved mail to INBOX /usr/local/virtual/tester(a)example.de # du -h 4,0K ./tmp 4,0K ./cur 5,3M ./new 5,3M . any idea? -- Mit freundlichen Gruessen Best Regards Robert Schetterer https://www.schetterer.org Munich/Bavaria/Germany

3 4

[Dovecot] environment variables required for startup
by Marshal Newrock 14 Feb '07

14 Feb '07

Using dovecot-1.0-rc19 (quotas are working good, btw) on Gentoo, I have a strange problem. On boot, dovecot doesn't start, the init script just times out. From the command line, it starts instantly without problem. Also, using a program called 'monit' to make sure processes stay running and restart them if they stop, if I manually stop dovecot, it is then unable to start it (calling the init script). Nothing gets logged. In all cases, it's "/etc/init.d/dovecot start". The only thing I can think of is that there's some environment variable required which isn't being set. monit specifically says it unsets everything except for a basic path before running the start program. Do any environment variables need to be set in order for dovecot to start successfully? -- Marshal Newrock Ideal Solution, LLC - http://www.idealso.com

4 8

[Dovecot] migration question: "imap server directory"
by Dan Price 14 Feb '07

14 Feb '07

In prepping our IMAP migration to Dovecot, I've hit upon a small issue: the "IMAP server directory" which Thunderbird users have set in the "advanced" prefs. Our old IMAP server seems to set your current directory to ~. This wound up causing users to set their IMAP server directory to "/home/<user>/mail/" so that their mailboxes would be found: --> A104 LIST "/home/dp/mail/" "%" * LIST (\NoSelect) "/" /home/dp/mail/ * LIST (\NoInferiors \UnMarked) "/" /home/dp/mail/sent-mail-Jul-2006 * LIST (\NoInferiors \UnMarked) "/" /home/dp/mail/sent-mail-Dec-2004 ... A104 OK LIST completed Of course, relative paths also work, but it seems that not many users are using them: --> A105 LIST "mail/" "%" * LIST (\NoSelect) "/" mail/ * LIST (\NoInferiors \UnMarked) "/" mail/sent-mail-Jul-2006 * LIST (\NoInferiors \UnMarked) "/" mail/sent-mail-Dec-2004 ... A105 OK LIST completed Also, it turns out that some users have mail in "mail" and some in "Mail". So for now, with Dovecot, I've set: mail_location = mbox:~:INBOX=/var/mail/%u:INDEX=%h/Mail/imapd-indices But users with absolute paths are having issues: A102 LIST "/home/dp/mail/" "%" A102 OK List completed. Versus: A103 LIST "mail/" "%" * LIST (\Noselect \HasChildren) "/" "mail/" * LIST (\NoInferiors \UnMarked) "/" "mail/sent-mail-Jul-2006" * LIST (\NoInferiors \UnMarked) "/" "mail/sent-mail-Dec-2004" A103 OK List completed. I've read the MailboxLocation page on the Wiki, but I'm not sure of the best way to proceed and have things stay compatible for my users. It is possible to ask all users to change, but I'm going to have to field a lot of questions if I ask users for that :/ Thanks! -dp -- Daniel Price - Solaris Kernel Engineering - dp(a)eng.sun.com - blogs.sun.com/dp

3 2

[Dovecot] quota interferes with dovecot
by jepoy 14 Feb '07

14 Feb '07

hi guys, im having some trouble on my quota.whenever my client reaches the quota, they cant download their mails anymore. +OK Dovecot 1.0 ready. user test +OK pass testd -ERR [IN-USE] Couldn't sync mailbox. +OK Logged in. Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Account: , Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 10053, Error Number: 0x800CCC0F -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 2

[Dovecot] info deleted messages imap
by Hola 14 Feb '07

14 Feb '07

Hi! I want to know the number of messages deleted when the mail user connect by IMAP protocol. When the user uses POP, we got this directive in the configuration file: pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s This is the log: dovecot: Feb 09 02:31:02 Info: pop3-login: Login: user=<xxxxxx>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured dovecot: Feb 09 02:31:02 Info: POP3(xxxxx): Disconnected: Logged out top=2/3756, retr=0/0, del=0/7, size=17392 If you look at "del=0/7" we know that user deleted 0 messages. When the user log in the account by IMAP protocol, appears the following: dovecot: Feb 09 02:02:36 Info: imap-login: Login: user=<xxxxx>, method=PLAIN, rip=82.xxx.xxx.xxx, lip=82.xxx.xxx.xxx dovecot: Feb 09 02:03:02 Info: IMAP(xxxxx): Disconnected: Logged out And we donÂ´t know the number of messages deleted, the question is: there is any directive like "pop3_logout_format" applied to IMAP?? Something like "imap_logout_format" ?? Dovecot version: 1.0.rc17.

2 1

[Dovecot] Rawlogs in freebsd?
by Francisco Reyes 14 Feb '07

14 Feb '07

I am trying to enable rawlogs. I made a directory /home/dovecot/dovecot.rawlog/, changed dovecot.conf to have mail_executable = /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/imap Made sure the /home/dovecot/dovecot.rawlog/ could be written to. Even made it 1777 as a test. Made sure the FreeBSD user database points /home/dovecot as the dovecot user's directory (left shell as nologin). Compiled dovecot from ports and using Dovecot 1.0.r21. Still no rawlog. Any pointers?

2 1

[Dovecot] Question about migration from tpop3d mbox -> Dovecot maildir
by Vladimir Koshelenko 14 Feb '07

14 Feb '07

Yes, again! :) I googled this issue but found no solution. Then, simple question - on this moment, it is possible without losing UIDLs or not?

2 1

[Dovecot] Some users cannot login
by Frank Bonnet 14 Feb '07

14 Feb '07

Hello I am in trouble with certain logins that cannot log in through Dovecot IMAP ... I've tried both with flat passwd or NIS It is possible to login with ssh ou to su - xxxx on the machine but it seems that the dovecot imap refuse to authenticate some users ... the dovecot version is the latest

3 2