- dovecot - dovecot.org

[Dovecot] wiki's howto and mailman
by kramer＠freemail.it 02 Aug '05

02 Aug '05

hello, i've implemented this on my mailserver : http://wiki.dovecot.org/moin.cgi/DovecotPostgresql but now mailman is broken. This is the error i got from postfix: Recipient address rejected: User unknown in local recipient table (in reply to RCPT TO command) of course the user mylist(a)mydomain.org does not exsist on the postgres db, but how i can fix this issue? someone wanna help, please? thanks, peppe --------------------------------------------------------------- Scegli il tuo dominio preferito e attiva la tua email! Da oggi l'eMail di superEva e' ancora piu' veloce e ricca di funzioni! http://webmail.supereva.it/new/ ---------------------------------------------------------------

2 1

[Dovecot] Not the server can do anything about it, but...
by Stewart Dean 01 Aug '05

01 Aug '05

WIBNI if the clients' message composition windows displayed the size of the prospective outgoing message as a color-coded BIG number... <50K green <200K yellow <500K orange >1MB red ...or some such.. Idiot clueless users occasionally send inadvertantly huge messages...the problem is that there is currently no feedback loop (like this suggestion)....nobody would mail a 100 pound hardcopy 'quick' USPS note to Aunt Mildred, but they're often doing the equivalent in email. If you bump into any client designers, give them the suggestion -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

1 0

[Dovecot] Just converted to Dovecot
by Marc Perkel 31 Jul '05

31 Jul '05

I'm using Test79 - wish me luck! Seems to be working ....... -- Marc Perkel - marc(a)perkel.com Spam Filter: http://www.junkemailfilter.com My Blog: http://marc.perkel.com

1 0

Re: [Dovecot] Supporting charsets
by Alan Premselaar 29 Jul '05

29 Jul '05

Peter Evans wrote: > Armando Soto Baeza (asbaeza(a)catsanet.com.mx) wrote: > >>We are trying to use support for japanese language, but when composing in >>squirrelmail or while resending either in squirrel or in Outlook, we do >>not get the right symbols. > > > Send me an email, in Japanese. > 私に日本語メール送ってくれませんか？ > > 妻もＤＯＶＥＣＯＴを使っているけどほとんど問題なし。 > > > ぴ > > > I'm also using Dovecot in a Japanese intensive environment with no problems. I would venture to guess that this is either a problem with the squirrelmail installation or the MTA. I'm also using a recent version of Squirrelmail in Japanese without any problems. Earlier versions had some issues (like if you had SM set to english menu mode and tried to read or send Japanese, it would appear as 'mojibake' ... that seems to have been fixed in the most recent release) for what it's worth, this mail that I'm replying to came across without any issues whatsoever. alan

1 0

[Dovecot] Outlook + Outlook Express
by Andrew Gargan 29 Jul '05

29 Jul '05

Hi I am having problems with users accessing their maildir mail stores through dovecot I am working on version 0.99.11-1 (on fedora core) It seems to be when the email size is large (450KB +) The errors are (the server disconnected unexpectedly) Have turned on the three Outlook and Outlook Express workarounds I found but no luck. Have read through logs and looked for clues but am just getting no where ... All the linux boxes here seem to be able to handle things fine ... (kmail evolution etc.) Thunderbird is also giving me hassles when trying to pull large mail files. The server is a 2.8 P4 HT with 1024 MB RAM 200GB SATA RAID. +- 7 domains and +-1200 users. Squirrel Mail seems fine and users are using that to get around the problem for now but I really need the pop3 access working ... My MTA is postfix and I am using virtual mailboxes using mysql_lookups. I am also running MailScanner and ClamAV and SpamAssassin (using the hold queue method) Regards Andrew Andrew Gargan Developer Interface Media (PTY) Ltd. Tel: 011 507 3003

2 3

[Dovecot] Handling virtual domains
by Phillip Davis 28 Jul '05

28 Jul '05

Hello all, I'm Having a sticky problem, and Im pretty sure I've configured dovecot wrong, I just don't know what I'm doing wrong. I have a system running sendmail. I need to sue virtual domains, as several domains will be hosted on this box. I am using squirrelmail for webmail and it has a vlogin plugin that allows me to use virtual domains, and it is working correctly, so far as I can tell. If a user goes to their email domain via http://www.domain.com/webmail/ and logs in, it correctly converts their login from just user that they typed in to user(a)domain.com, and if another domain was domain2.com and they went to http://www.domain2.com/webmail it will send user(a)domain2.com to dovecot. This is where I think I'm doing it wrong. Dovecot seems to just try that username which doesnt exist to the local OS of course, its just user, not user(a)domain.com. I read the part about dovecot using the auth_passdb and auth_userdb but was really confused how it works. if I use those, does it expect sendmail to deliver mail for those virtual domains to a new path I have supplied? also do I have to create a new and separate login and password flat file for it to authenticate? if so, how do I configure sendmail to deliver only those specific mails from each separate user from different virtual domains to be delivered? I'm just trying out the virtual domain thing, and I'm definitely really really confused because it seems each piece of software I have running here wants to do it differently. any pointers, hits or help would greatly be appreciated. -- Phil Phil(a)daviszone.org

1 0

[Dovecot] MySQL authentication
by Andrew Gargan 28 Jul '05

28 Jul '05

Hi I am wanting to install : dovecot 1.0-stable I currently have dovecot 0.99.11-1 which came packaged on Fedora Core 3 It is doing auth off a MySQL db an working well I have downloaded the latest stable tarball and extracted ... I don't see how to enable mysql lookups at compile time... Help please ... I am getting a lot of pressure from the people at work ... Regards Andrew Andrew Gargan Developer Interface Media (PTY) Ltd. Tel: 011 507 3003

2 1

[Dovecot] Need Help About My Problem ( Dovecot / Postfix / MySQL / Postfixadmin )
by Pratchaya Chatuphian 28 Jul '05

28 Jul '05

Dear , Dovecot List ( Everyone ) I have some problem about dovecot/postfix/mysql Would u like to tell me about the solution ? sir Thank you very much for advance. Sir Best Regards, Pratchaya ================================== ================================== ================================== This is my problem/error sir 1. ERROR = "" A NO "" and 2. ERROR = "" -ERR No INBOX for user. " I run Dovecot + Postfix + Postfixadmin + MySQL When i work with command line .. i have problem like this ( When i 'm in command line ) ##############################*###### [root@server etc]# telnet localhost 143 Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. * OK dovecot ready. A LOGIN test...(a)pepocono.com 123456 A OK Logged in. A SELECT inbox A NO A LOGOUT * BYE Logging out A OK Logout completed. Connection closed by foreign host ##############################*###### [root@server etc]# telnet localhost 110 Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. +OK dovecot ready. USER test...(a)pepocono.com +OK PASS 123456 +OK Logged in. -ERR No INBOX for user. Connection closed by foreign host. [root@jenus etc]# ##############################*####### My Config ==============================*======== dvecot.conf ==============================*======== default_mail_env = maildir:/var/mail/virtual/%1u/*%u/Maildir auth = plain auth_mechanisms = plain digest-md5 auth_userdb = mysql /usr/local/etc/dovecot-mysql.c*onf auth_passdb = mysql /usr/local/etc/dovecot-mysql.c*onf auth_user = mailusers ==============================*======== dvecot-mysql.conf ==============================*======== db_host = localhost db_unix_socket = /var/lib/mysql/mysql.sock db = postfix db_user = postfix db_passwd = postfix db_client_flags = 0 password_query = SELECT password FROM mailbox WHERE username = '%u' #user_query = SELECT concat('/var/mail/virtual/', maildir) as home, 10000 as uid, 10000 as gid FROM mailbox WHERE username = '%u' #user_query = SELECT '10000' AS uid, '10000' AS gid FROM mailbox WHERE username = '%u' AND active = '1' #user_query = SELECT home, uid, gid FROM users WHERE user = '%u' user_query = SELECT home, uid, gid FROM users WHERE user = '%u' AND active = '1' ( i use all case #comment but it'doesn't work ) ==============================*======== main.cf ==============================*======== virtual_mailbox_base = /var/mail/virtual virtual_mailbox_domains = mysql:/etc/postfix/postfixmysq*l/mysql_virtual_domains_maps.c*f virtual_mailbox_limit = 51200000 virtual_mailbox_maps = mysql:/etc/postfix/postfixmysq*l/mysql_virtual_mailbox_maps.c*f virtual_alias_domains = $virtual_alias_maps virtual_minimum_uid = 10000 virtual_uid_maps = static:10000 virtual_gid_maps = static:10000 # Additional for quota support virtual_create_maildirsize = yes virtual_mailbox_extended = yes virtual_mailbox_limit_maps = mysql:/etc/postfix/postfixmysq*l/mysql_virtual_mailbox_limit_*maps.cf virtual_mailbox_limit_override = yes virtual_maildir_limit_message = Sorry, the user's maildir has overdrawn his diskspace quota, please try again later. virtual_overquota_bounce = yes ========================= Note ( more information ) :: ========================= mailusers uid=10000 gid = 10000 home = /var/mail/virtual

1 0

[Dovecot] Preventing IMAP folder removal?
by John R. Dennison 28 Jul '05

28 Jul '05

Is there a way to configure Dovecut (version: dovecot-stable) to prevent the removal of an IMAP folder? We are planning on rolling out the @Mail webmail client to our user base in the next few weeks. This package has an internal Spam folder that we use to deliver spam into to allow our users to get to both their main mailbox and also their spam repository in one location. We are a Maildir shop, so the folder appears as: '~username/Maildir/..Spam' We want to use a sym-link to point '..Spam' to a location on another filesystem. Our testing shows that dovecot will happily follow a sym-link properly and no badness occurs as a result. Our concern, however, is that a user will attempt to remove their Spam folder, which will break the symlink and the next time a spam message is delivered the folder will be re-created as a directory and will reside on the same filesystem as their Maildir. Preventing the removal of the folder would be the easiest solution. If such a restriction is not already present in dovecot, might something be added to allow admins to lock down removal of folders? If this question has already been asked and answered on the list I apologize - I did quickly browse some of the back list and did not see a reference to the topic, but I admit, I may have missed it. Thank you in advance, John -- "I'm sorry but our engineers do not have phones." As stated by a Network Solutions Customer Service representative when asked to be put through to an engineer. "My other computer is your windows box." Ralf Hildebrandt

4 3

[Dovecot] Index File Permissions - Perhaps feature Request
by Marc Perkel 27 Jul '05

27 Jul '05

Trying an experiment to put the index files on a different volume than the mailbox files The idea being that the mailbox files are in a limited space slow raid1 array and the index files are somewhere else that is fast and not backed up. I'm using a virtual file structure as follows: /vhome/%d/home/%n The index files are set to: /nobackup/indexes/%d/%n Upon startup it created the index files correctly making all the missing directories. But I have an issue with the permissions. The problem is that it works for the first user, but the second user will have a permission error on the /%d/ level because of the 700 permissions. So - I would like to specify that directories that are automatically created have 770 permissions instead of 700, and, that perhaps I might want to ser the group permissions to 660 instead of 600. This might make Dovecot more ready for shared mailboxes in the future.

1 1

[Dovecot] Master Password Setup
by Marc Perkel 27 Jul '05

27 Jul '05

This should be easy but can someone tell me how to do this. I want to set up a master password to read anyone's email account for tech support reasons. How would you do that?

2 1

[Dovecot] Dovecot, Postfix, Mysql and Virtual Users
by Andre Bunting 27 Jul '05

27 Jul '05

I have been reading up : http://wiki.dovecot.org/moin.cgi/DovecotPostgresql to create virtual users who can access the email. Can i follow these steps with a few changes to get to use mysql instead of Postgresql ? Also i dont know if u all can help.. but i have tried to do : SASL2 authentication configuration in main.cf(Postfix): smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous smtpd_sasl_local_domain = domain.org smtp_sasl_auth_enable = no And when i start postfix with these settings i get an error saying"invlaid boolean" .. can anyone help ? Regards, Andre

2 1

[Dovecot] Small Feature Dovecot Should Have
by Marc Perkel 27 Jul '05

27 Jul '05

There should be a config command that allows you to change the default ".subscriptions" file to ".mailboxlist" for WU-IMAP compatibility. Yes - I can rename them all but it would be handy for testing purposes and it should be trivial to add this feature. I'm still someone who is going to convert soon, but still testing and waiting for stability.

1 0

[Dovecot] Supporting charsets
by Armando Soto Baeza 27 Jul '05

27 Jul '05

Hi there! We are trying to use support for japanese language, but when composing in squirrelmail or while resending either in squirrel or in Outlook, we do not get the right symbols. The server and client PCs have all the required software. Indeed, we receive japanese written messages and can display them well. The problem arises when we resend or compose a message. In the squirrel configuration, we found that our imap has to support the charsets we want to use. The question is, how can we add this to dovecot. We are using release 0.99.14-1 on GNU Debian 3.1 r0 (sarge) Any idea? Thanks for helping -- Alta tecnologia para la empresa mexicana

2 1

[Dovecot] last access file for 1.0-stable?
by Jeff A. Earickson 26 Jul '05

26 Jul '05

Hi, I am almost ready to convert from UW-imap to dovecot 1.0 stable for my imap use. I hacked UW-imap to touch a file in the user's home directory so I can always tell the last time they used imap. My hack looks something like this: if(authenticated) { touchfile = (char *) malloc((strlen (home) + 15); sprintf(touchfile,"%s/.imapd.last",homedir); fd = open(touchfile,O_WRONLY|O_CREAT|O_TRUNC,0600); if(fd < 0) syslog (LOG_NOTICE|LOG_AUTH,"touchfile failed for %s:%s",user,strerror(errno)); else close(fd); free(touchfile); } Where to do this in the dovecot code? Is there something like this already available? I realize that the index/cache files contain last-access data, but if the cache files become corrupted and have to be removed, then this last-access information is lost. I would like something independent of the cache files. Advice please... Jeff Earickson Colby College

2 1

[Dovecot] Commercial support
by Timo Sirainen 26 Jul '05

26 Jul '05

1.0 release is slowly (but surely :) getting nearer and I'd like to be able to offer commercial support for it for those who want or need it. I have a few different plans for how to do that, but I haven't really decided yet what to do. So I thought I'd ask a few questions here to see how much interest there is currently, which could help me make some decisions sooner. You should probably reply privately to me so this list won't get spammed. So, assume that Dovecot v1.0 will really be stable, will have real documentation, and the support isn't going to be completely in hands of just one or two guys. I think there would basically be two types of support available: 1. Basic support Guaranteed replies to questions within some time interval. - what response times? a few days? - phone support needed? - what would you be willing to pay for it? 2. Mission critical support For those who *really* can't afford any unexpected downtime, and so would be willing to pay more for quick response times. Problems divided to different categories (eg. normal, high, critical) with different response times. - what response times? a few days for normal, about one day for high, less for critical? - sanctions? - customized modifications, kept up-to-date for new Dovecot versions? - what would you be willing to pay for it? I'm not sure if there should be "outsourced email server maintenance" option too. Or maybe some really low cost support for a limited number of questions. Any other ideas, suggestions or tips? Did I miss something important? And finally, would you like to have a job related to Dovecot? :)

2 1

[Dovecot] virtual mailboxes with postfix
by David Cake 26 Jul '05

26 Jul '05

I have set up postfix with virtual mailboxes stored via mysql, and using postfixadmin, and dovecot as pop/imap server My postfix and mysql setup are pretty much standard for postfixadmin, as described here <http://postfixwiki.org/index.php?title=Virtual_Users_and_Domains_with_Couri…> (except for the parts about courier-imap.) Everything appears to be working fine except actually checking and authenticating mail via dovecot. I am fairly sure all I really need is the appropriate incantations in /etc/dovecot/dovecot.conf and dovecot-mysql.conf - does anyone have this set up and working? I should add that I want to allow both virtual mailboxes, and also local accounts, so I presumably need to support two different kinds of authentication. Regards David

2 1

[Dovecot] removing (hopefully) unneeded access to $HOME
by adsmith＠math.duke.edu 25 Jul '05

25 Jul '05

Hi, Thanks for dovecot. It's the best IMAP server ever. Okay, here's my problem: I use mbox INBOXes from /var/spool/mail/%u, and the INDEX lies in /var/spool/mail/dovecot/%d/%u. Users' other folders are found in /%h/mail. Now, I notice that when a user is accessing her INBOX, the imap process cwd's to the user's home, which I'd like to prevent as much as possible. E.g., when the user's client is only watching INBOX, I still see: [root@tock:~]$ lsof | grep home_kt imap 6422 kt cwd DIR 0,17 12288 7602177 /home/kt (other.host:/home/kt) Is there a way I can tweak the dovecot settings so that this cwd isn't holding open the NFS mount? Many thanks, Abe Smith -- # Abraham David Smith, <adsmith(a)math.duke.edu> # # http://fds.duke.edu/db/aas/math/grad/adsmith # # Mathematics Graduate Student, Duke University #

1 1

Re: [Dovecot] pop3 authentication failure - password mismatch
by James Sun 25 Jul '05

25 Jul '05

On 7/22/05, Girish Patangay <girish(a)intoto.com> wrote: > Shouldn't you be using "shadow" instead of passwd for the passdb? > > Just a curious question. > Yes! You are right. "shadow" should work as well. I just give it a try and auth worked! Thanks. However, I am not hitting another problem : no proper permission. If I understand correctly I have set it in dovecot.conf file to use "root" for processing. How come I don't have enough permission? Jul 23 02:26:56 hsiufen dovecot: Dovecot v1.0-stable starting up Jul 23 02:28:10 hsiufen dovecot: pop3-login: Login: jam [24.6.106.170] Jul 23 02:28:10 hsiufen dovecot: POP3(jam): open(/var/mail/.temp.hsiufen.net.15682.f3c4cf83d750e6e4) failed: Permission denied Jul 23 02:28:10 hsiufen dovecot: POP3(jam): file_lock_dotlock() failed with mbox file /var/mail/jam: Permission denied Jul 23 02:28:31 hsiufen dovecot: Killed with signal 2 Any ideas? Jun

3 3

[Dovecot] Re: Bug#319504: Bug in 0.99.14 mbox handling - mail UIDs are renumbered without bumping UIDVALIDITY
by Jaldhar H. Vyas 25 Jul '05

25 Jul '05

On Fri, 22 Jul 2005, David McBride wrote: > Package: dovecot-imapd > Version: 0.99.14-1 > Severity: important > > Hi, > > I think I've identified a bug in Dovecot 0.99.14 as packaged and > distributed by Debian Sarge. I believe the bug lies in the original > Dovecot source, not with any modifications made by Debian. > > Specifically, this bug deals with Dovecot's handling of message unique > identifiers (UIDs) for IMAP clients when using the mbox mailbox storage > format. > David, can you check if the problem persists with 0.99.20050712-1 which is in sid? This is actually the 1.0stable branch of dovecot and has many fixes not included in 0.99.x The package should work correctly on sarge (a proper sarge backport is forthcoming) but you will also need libpq4 from sid and you'll need to make sure dovecot-common is also upgraded to 0.99.20050712-1 also. -- Jaldhar H. Vyas <jaldhar(a)debian.org> La Salle Debain - http://www.braincells.com/debian/

2 1

[Dovecot] dovecot permission denied problems.
by John Mc Donald 25 Jul '05

25 Jul '05

I am trying to setup dovecot on a FC4 machine. Access to the machine is provided through pam. When I login to the machine my home directory is mounted over nfs from a central file server. I have dovecot installed and running but it can't seem to access my home directory. When I try and access my mail I get the following three lines in /var/log/maillog: > Jul 25 12:46:04 escher imap-login: Login: ###### [::ffff:###.###.###.###] > Jul 25 12:46:04 escher dovecot: chdir(/home/######) failed with uid > ####: Permission denied > Jul 25 12:46:04 escher dovecot: child 13182 (imap) returned error 89 The uid that is used is the one associated with my home directory. As far as I understand it when you connect to dovecot the imap connection setuid's to the uid of the authenticated user so there should be no permission problems. To try and help in the debugging process I also setup a local user "testimap" using > /usr/sbin/useradd -d /tmp/testimap testimap I then try to use thunderbird to connect to it and I get the following in /var/log/maillog > Jul 25 12:54:54 escher imap-login: Login: testimap > [::ffff:###.###.###.###] > Jul 25 12:54:54 escher imap(testimap): mbox: Can't create root IMAP > folder /tmp/testimap/mail: Permission denied > Jul 25 12:54:54 escher imap(testimap): MAIL environment missing and > autodetection failed (home /tmp/testimap) > Jul 25 12:54:54 escher dovecot: child 13360 (imap) returned error 89 Can anyone tell me what I am doing wrong here? TIA, John. -- ================================== John Mc Donald, Dept. of Computer Science, National University of Ireland, Maynooth, Co. Kildare, Ireland. Email : johnmcd(a)cs.nuim.ie Tel: +353-1-7084589 Fax: +353-1-7083848 Web: http://www.cs.nuim.ie/~johnmcd GnuPG Key: http://www.cs.nuim.ie/~johnmcd/public_key.asc ==================================

2 2

[Dovecot] inotify support in dovecot
by Reuben Farrelly 25 Jul '05

25 Jul '05

Hi, I note that dovecot supported inotify from -test77, and now the Linux kernel supports it starting from linux-2.6.13-rc3. So in theory I should be set to go. I'm using an -mm kernel, and it was built with inotify, on FC4/devel. However when trying to build with it using --with-notify=inotify, I always seem to be getting this message: checking for poll... yes configure: error: inotify requested but not available, check for existence of <linux/inotify.h> /bin/sh ./config.status --recheck What is required for inotify to be recognised and built into dovecot? I've tried copying the header from linux-2.6/include/linux/inotify.h to the /usr/include/linux directory, but that didn't help - and seems wrong to do anyway. Has anyone else had any experiences with inotify/dovecot? reuben

2 3

[Dovecot] 1.0-test79
by Timo Sirainen 25 Jul '05

25 Jul '05

http://dovecot.org/test/ Now checks that field alignmentations are in indexes as they're expected. test78 crashed if it was wrong, earlier versions ignored the problem (and crashed with 64bit systems). Now if it's wrong, it prints error to log file and recreates the index. That means you probably should delete all dovecot.index files to avoid tons of errors in log files. Only mbox users need to do this. - LSUB: Don't crash if .subscriptions file can't be opened. Also in general give proper "permission denied" error if LIST/LSUB failed because of permission problems. - Maildir: Fix deadlocking when saving messages (noticeable with copying lots of messages with Thunderbird) - LDAP: user_global_uid/gid wasn't working. Also now they support having user/group names from /etc/passwd instead of just numbers. - passwd-file now supports variables in filename, so you can do eg. args = /etc/passwd.%d - Open/close PAM session if -session option is given. Patch by Pasi Sjöholm. - Added tb-extra-mailbox-sep workaround for Thunderbird+mbox problems.

6 9

[Dovecot] dovecot 1.0-stable (050721) rpm for FC3
by James Sun 25 Jul '05

25 Jul '05

OK, thanks for the all the helps I got from the list. I finally managed to get stable 1.0 (050721) built and running. To avoid the same hassels for others, I made an rpm. You can check it out at http://linux.junsun.net/rpms My main motivation to upgrade to this version is to avoid the "Status: O" header re-write bug in 0.99 versions. Cheers. Jun

1 0

[Dovecot] ssl_cipher_list
by Robert Allerstorfer 24 Jul '05

24 Jul '05

Hi, I have noticed the 'ssl_cipher_list' directive in the 1.0-test snapshots which is not in 0.99. It's default value seems to be "all:!low". However, this would not be compatible with openssl's cipher listing format. Thus, I would vote to change it's format to be openssl compatible. To be compatible, it has to be changed to "ALL:!LOW" (just upercased in this case). IMO, this would be helpful because executing openssl ciphers -v 'all:!low' would not return any cipher, but openssl ciphers -v 'ALL:!LOW' would return the expected cipher list such as ADH-AES256-SHA SSLv3 Kx=DH Au=None Enc=AES(256) Mac=SHA1 DHE-RSA-AES256-SHA SSLv3 Kx=DH Au=RSA Enc=AES(256) Mac=SHA1 DHE-DSS-AES256-SHA SSLv3 Kx=DH Au=DSS Enc=AES(256) Mac=SHA1 AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 ADH-AES128-SHA SSLv3 Kx=DH Au=None Enc=AES(128) Mac=SHA1 DHE-RSA-AES128-SHA SSLv3 Kx=DH Au=RSA Enc=AES(128) Mac=SHA1 DHE-DSS-AES128-SHA SSLv3 Kx=DH Au=DSS Enc=AES(128) Mac=SHA1 AES128-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1 DHE-DSS-RC4-SHA SSLv3 Kx=DH Au=DSS Enc=RC4(128) Mac=SHA1 EXP1024-DHE-DSS-RC4-SHA SSLv3 Kx=DH(1024) Au=DSS Enc=RC4(56) Mac=SHA1 export EXP1024-RC4-SHA SSLv3 Kx=RSA(1024) Au=RSA Enc=RC4(56) Mac=SHA1 export EXP1024-DHE-DSS-DES-CBC-SHA SSLv3 Kx=DH(1024) Au=DSS Enc=DES(56) Mac=SHA1 export EXP1024-DES-CBC-SHA SSLv3 Kx=RSA(1024) Au=RSA Enc=DES(56) Mac=SHA1 export EXP1024-RC2-CBC-MD5 SSLv3 Kx=RSA(1024) Au=RSA Enc=RC2(56) Mac=MD5 export EXP1024-RC4-MD5 SSLv3 Kx=RSA(1024) Au=RSA Enc=RC4(56) Mac=MD5 export EXP-KRB5-RC4-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=RC4(40) Mac=MD5 export EXP-KRB5-RC2-CBC-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=RC2(40) Mac=MD5 export EXP-KRB5-DES-CBC-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=DES(40) Mac=MD5 export EXP-KRB5-RC4-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=RC4(40) Mac=SHA1 export EXP-KRB5-RC2-CBC-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=RC2(40) Mac=SHA1 export EXP-KRB5-DES-CBC-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=DES(40) Mac=SHA1 export KRB5-RC4-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=RC4(128) Mac=MD5 KRB5-DES-CBC3-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=3DES(168) Mac=MD5 KRB5-RC4-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=RC4(128) Mac=SHA1 KRB5-DES-CBC3-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=3DES(168) Mac=SHA1 EDH-RSA-DES-CBC3-SHA SSLv3 Kx=DH Au=RSA Enc=3DES(168) Mac=SHA1 EXP-EDH-RSA-DES-CBC-SHA SSLv3 Kx=DH(512) Au=RSA Enc=DES(40) Mac=SHA1 export EDH-DSS-DES-CBC3-SHA SSLv3 Kx=DH Au=DSS Enc=3DES(168) Mac=SHA1 EXP-EDH-DSS-DES-CBC-SHA SSLv3 Kx=DH(512) Au=DSS Enc=DES(40) Mac=SHA1 export DES-CBC3-SHA SSLv3 Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1 EXP-DES-CBC-SHA SSLv3 Kx=RSA(512) Au=RSA Enc=DES(40) Mac=SHA1 export EXP-RC2-CBC-MD5 SSLv3 Kx=RSA(512) Au=RSA Enc=RC2(40) Mac=MD5 export RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 EXP-RC4-MD5 SSLv3 Kx=RSA(512) Au=RSA Enc=RC4(40) Mac=MD5 export ADH-DES-CBC3-SHA SSLv3 Kx=DH Au=None Enc=3DES(168) Mac=SHA1 EXP-ADH-DES-CBC-SHA SSLv3 Kx=DH(512) Au=None Enc=DES(40) Mac=SHA1 export ADH-RC4-MD5 SSLv3 Kx=DH Au=None Enc=RC4(128) Mac=MD5 EXP-ADH-RC4-MD5 SSLv3 Kx=DH(512) Au=None Enc=RC4(40) Mac=MD5 export DES-CBC3-MD5 SSLv2 Kx=RSA Au=RSA Enc=3DES(168) Mac=MD5 RC2-CBC-MD5 SSLv2 Kx=RSA Au=RSA Enc=RC2(128) Mac=MD5 EXP-RC2-CBC-MD5 SSLv2 Kx=RSA(512) Au=RSA Enc=RC2(40) Mac=MD5 export RC4-MD5 SSLv2 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 EXP-RC4-MD5 SSLv2 Kx=RSA(512) Au=RSA Enc=RC4(40) Mac=MD5 export I want dovecot to only accept high encrypted ciphers, thus it should support ssl_cipher_list = ALL:!ADH!LOW:!SSLv2:!EXP:+HIGH:+MEDIUM corresponding to a openssl list such as DHE-RSA-AES256-SHA SSLv3 Kx=DH Au=RSA Enc=AES(256) Mac=SHA1 DHE-DSS-AES256-SHA SSLv3 Kx=DH Au=DSS Enc=AES(256) Mac=SHA1 AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 KRB5-DES-CBC3-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=3DES(168) Mac=MD5 KRB5-DES-CBC3-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=3DES(168) Mac=SHA1 EDH-RSA-DES-CBC3-SHA SSLv3 Kx=DH Au=RSA Enc=3DES(168) Mac=SHA1 EDH-DSS-DES-CBC3-SHA SSLv3 Kx=DH Au=DSS Enc=3DES(168) Mac=SHA1 DES-CBC3-SHA SSLv3 Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1 DHE-RSA-AES128-SHA SSLv3 Kx=DH Au=RSA Enc=AES(128) Mac=SHA1 DHE-DSS-AES128-SHA SSLv3 Kx=DH Au=DSS Enc=AES(128) Mac=SHA1 AES128-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1 DHE-DSS-RC4-SHA SSLv3 Kx=DH Au=DSS Enc=RC4(128) Mac=SHA1 KRB5-RC4-MD5 SSLv3 Kx=KRB5 Au=KRB5 Enc=RC4(128) Mac=MD5 KRB5-RC4-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=RC4(128) Mac=SHA1 RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 This would really make "Dovecot (...) written with security primarily in mind" Thanks for consideration! rob.

2 2

[Dovecot] feature or bug on delete?
by Cor Bosman 23 Jul '05

23 Jul '05

RFC 3501 mentions this: The DELETE command MUST NOT remove inferior hierarchical names. For example, if a mailbox "foo" has an inferior "foo.bar" (assuming "." is the hierarchy delimiter character), removing "foo" MUST NOT remove "foo.bar". It is an error to attempt to delete a name that has inferior hierarchical names and also has the \Noselect mailbox name attribute (see the description of the LIST response for more details). It is permitted to delete a name that has inferior hierarchical names and does not have the \Noselect mailbox name attribute. In this case, all messages in that mailbox are removed, and the name will acquire the \Noselect mailbox name attribute. This is what dovecot does: . create foo . OK Create completed. . create foo/bar . OK Create completed. . list "" "*" * LIST (\HasChildren) "/" "foo" * LIST (\HasNoChildren) "/" "foo/bar" . OK List completed. (some other output removed here) . delete foo . OK Delete completed. . list "" "*" * LIST (\HasNoChildren) "/" "foo/bar" . OK List completed. Reading the above section, shouldnt I be seeing a: * LIST (\Noselect \HasChildren) "/" "foo" Regards, Cor

2 2

[Dovecot] Assertion failure in mail-index-transaction.c
by Todd Burroughs 23 Jul '05

23 Jul '05

I just noticed one instance of this in the current CVS version: dovecot: Jul 18 15:25:48 Error: 5962 IMAP(mailuser): mbox sync: Expunged message reappeared in mailbox /mailhome/new/o/h/mailuser/mbox (UID 2834 < 2872) dovecot: Jul 18 15:25:48 Error: 5962 IMAP(mailuser): file mail-index-transaction.c: line 129 (mail_index_buffer_convert_to_uids): assertion failed: (*seq != 0) dovecot: Jul 18 15:25:48 Error: child 5962 (imap) killed with signal 6 (gdb) bt full #0 0xffffe410 in ?? () No symbol table info available. #1 0xbffff438 in ?? () No symbol table info available. #2 0x00000006 in ?? () No symbol table info available. #3 0x0000174a in ?? () No symbol table info available. #4 0xb7ef1d41 in raise () from /lib/tls/libc.so.6 No symbol table info available. #5 0xb7ef3529 in abort () from /lib/tls/libc.so.6 No symbol table info available. #6 0x0809a96a in i_internal_panic_handler ( fmt=0x6 <Address 0x6 out of bounds>, args=0x174a <Address 0x174a out of bounds>) at failures.c:374 No locals. #7 0x0809ad84 in i_panic ( format=0x80a772c "file %s: line %d (%s): assertion failed: (%s)") at failures.c:173 No locals. #8 0x08082711 in mail_index_buffer_convert_to_uids (t=0x80d14b8, array=0x80d14d0, range=1) at mail-index-transaction.c:129 view = (struct mail_index_view *) 0x80cfdc0 rec = Variable "rec" is not available. (gdb) bt #0 0xffffe410 in ?? () #1 0xbffff438 in ?? () #2 0x00000006 in ?? () #3 0x0000174a in ?? () #4 0xb7ef1d41 in raise () from /lib/tls/libc.so.6 #5 0xb7ef3529 in abort () from /lib/tls/libc.so.6 #6 0x0809a96a in i_internal_panic_handler ( fmt=0x6 <Address 0x6 out of bounds>, args=0x174a <Address 0x174a out of bounds>) at failures.c:374 #7 0x0809ad84 in i_panic ( format=0x80a772c "file %s: line %d (%s): assertion failed: (%s)") at failures.c:173 #8 0x08082711 in mail_index_buffer_convert_to_uids (t=0x80d14b8, array=0x80d14d0, range=1) at mail-index-transaction.c:129 #9 0x08083b87 in mail_index_transaction_commit (t=0x80d14b8, log_file_seq_r=0xbffff65c, log_file_offset_r=0xbffff660) at mail-index-transaction.c:183 #10 0x080703f4 in mbox_sync (mbox=0x80c5bc0, flags=Variable "flags" is not available. ) at mbox-sync.c:1623 #11 0x080710c9 in mbox_storage_sync_init (box=0x80c5bc0, flags=MAILBOX_SYNC_FLAG_FULL_READ) at mbox-sync.c:1700 #12 0x0808ef01 in mailbox_sync_init (box=0x0, flags=MAILBOX_SYNC_FLAG_FULL_READ) at mail-storage.c:334 #13 0x0805eb58 in imap_sync_nonselected (box=0x80c5bc0, flags=MAILBOX_SYNC_FLAG_FULL_READ) at imap-sync.c:166 #14 0x080580f6 in _cmd_select_full (cmd=0x80beba8, readonly=0) at cmd-select.c:39 #15 0x08058281 in cmd_select (cmd=0x80beba8) at cmd-select.c:92 #16 0x0805986b in _client_input (context=0x80beb68) at client.c:334 #17 0x0809ff3a in io_loop_handler_run (ioloop=0x80bd9b0) at ioloop-poll.c:184 #18 0x0809f569 in io_loop_run (ioloop=0x80bd9b0) at ioloop.c:218 #19 0x08060657 in main (argc=1, argv=0xbffffa34, envp=0xbffffa3c) at main.c:228 (gdb) p seq $1 = (uint32_t *) 0x80d4d18 (gdb) p *seq $2 = 0 (gdb) p view->map $3 = (struct mail_index_map *) 0x80c5fd0 (gdb) p *view->map $4 = {refcount = 3, hdr = {major_version = 7 '\a', minor_version = 0 '\0', base_header_size = 120, header_size = 200, record_size = 36, compat_data = "\001\b\004", indexid = 1113829460, flags = 0, uid_validity = 1113827022, next_uid = 2872, messages_count = 929, recent_messages_count = 0, seen_messages_count = 810, deleted_messages_count = 0, first_recent_uid_lowwater = 0, first_unseen_uid_lowwater = 1149, first_deleted_uid_lowwater = 2846, log_file_seq = 8, log_file_int_offset = 27912, log_file_ext_offset = 27912, sync_size = 9241460, sync_stamp = 1113863658, day_stamp = 1121659200, day_first_uid = {2855, 2849, 2849, 2753, 2753, 2753, 2491, 187}}, hdr_base = 0x80c60b0, records = 0x80c61d8, records_count = 929, extension_pool = 0x80ce490, extensions = { buffer = 0x80ce4c0, element_size = 28}, ext_id_map = {buffer = 0x80ce588, element_size = 4}, mmap_base = 0x0, mmap_size = 0, mmap_used_size = 0, buffer = 0x80c61b8, hdr_copy_buf = 0x80c6090, keyword_idx_map = { buffer = 0x0, element_size = 0}, write_to_disk = 0} (gdb) p t $5 = (struct mail_index_transaction *) 0x80d14b8 (gdb) p *t $6 = {refcount = 1, view = 0x80cfdc0, appends = {buffer = 0x80d4830, element_size = 8}, first_new_seq = 930, last_new_seq = 953, expunges = { buffer = 0x80d4810, element_size = 8}, updates = {buffer = 0x0, element_size = 0}, last_update_idx = 0, pre_hdr_change = '\0' <repeats 119 times>, pre_hdr_mask = '\0' <repeats 119 times>, post_hdr_change = '\0' <repeats 28 times>, "O\v", '\0' <repeats 89 times>, post_hdr_mask = '\0' <repeats 28 times>, "\001\001\001\001", '\0' <repeats 87 times>, ext_rec_updates = {buffer = 0x80d4750, element_size = 8}, ext_resizes = {buffer = 0x0, element_size = 0}, ext_resets = {buffer = 0x0, element_size = 0}, keyword_updates = {buffer = 0x0, element_size = 0}, keyword_resets = {buffer = 0x80d4730, element_size = 8}, cache_trans_ctx = 0x0, hide_transaction = 0, no_appends = 0, external = 1, pre_hdr_changed = 0, post_hdr_changed = 1, log_updates = 1} (gdb) p j $7 = 2 (gdb) p range $8 = 1

2 1

[Dovecot] pop3 authentication failure - password mismatch
by James Sun 23 Jul '05

23 Jul '05

I tried to run dovecot 1.0 built by myself but encountered the above problem. See the error traces below. First of all, the password and user are correct, as it worked with the 0.99 rpm version of dovecot. I also hand verified with ssh. I also attached the dovecot config file below. Any ideas? Jun fetchmail output on client: ------------------------------------- fetchmail: POP3< +OK Dovecot ready. fetchmail: POP3> CAPA fetchmail: POP3< +OK fetchmail: POP3< CAPA fetchmail: POP3< TOP fetchmail: POP3< USER fetchmail: POP3< UIDL fetchmail: POP3< RESP-CODES fetchmail: POP3< PIPELINING fetchmail: POP3< SASL PLAIN fetchmail: POP3< . fetchmail: POP3> USER jam fetchmail: POP3< +OK fetchmail: POP3> PASS * fetchmail: POP3< -ERR Authentication failed. fetchmail: Authentication failed. maillog on dovecot server: -------------------------------------- Jul 22 18:28:18 hsiufen dovecot: auth(default): passwd(jam,24.6.106.170): password mismatch Jul 22 18:28:19 hsiufen dovecot: pop3-login: Aborted login [24.6.106.170] Jul 22 18:29:32 hsiufen dovecot: Killed with signal 2 dovecot.conf ------------------ protocols = imap imaps pop3 pop3s listen = * ssl_disable = no disable_plaintext_auth = no protocol imap { login_executable = /root/local/encap/dovecot-1.0/libexec/dovecot/imap-login mail_executable = /root/local/encap/dovecot-1.0/libexec/dovecot/imap } protocol pop3 { login_executable = /root/local/encap/dovecot-1.0/libexec/dovecot/pop3-login mail_executable = /root/local/encap/dovecot-1.0/libexec/dovecot/pop3 } auth_executable = /root/local/encap/dovecot-1.0/libexec/dovecot/dovecot-auth auth_verbose = yes auth default { mechanisms = plain passdb = passwd userdb = passwd user = root }

2 3

[Dovecot] Stable Version
by Marc Perkel 23 Jul '05

23 Jul '05

I'm very new to Dovecot - still testing it - and planing to convert in the futire. I see a lot of rapid development here which I like. But I'm wondering if there is any kind of schedule for blessing 1.0 as official - or - what the custom is for a stable release. Just trying to think about when to jump in. I'm fairly brave, but the feature I need we just added today. -- Marc Perkel - marc(a)perkel.com Spam Filter: http://www.junkemailfilter.com My Blog: http://marc.perkel.com

2 1

[Dovecot] 1.0-test78
by Timo Sirainen 22 Jul '05

22 Jul '05

http://dovecot.org/test/ Fixes: - Crashes in non-x86 64bit systems - Bugs in cache file header caching (you probably should delete all dovecot.index.cache files to be sure the bug won't haunt you in future) - FETCH ENVELOPE patch by Chris Wakelin (I'll try to figure out what to do with the list patch later) Known bugs left: - Thunderbird + maildir: moving lots of messages from mailbox to another may cause deadlock (lock timeouts in half a minute or so and fails the operation). - I guess I should try to look at the Thunderbird + POP3 + lots of messages -> DELE error too again.. - I've heard that 1.0-tests are a lot slower than 0.99.x or 1.0-stable when checking new mail (with kmail), ie. client asking STATUS of all mailboxes. I've looked at their strace outputs and the difference (5-10x slower) comes from 1.0-test waiting longer in poll() for client input, which doesn't really make any sense to me. Can anyone verify this or think of reasons why this could happen? Maybe I'm setting some socket option differently, although I don't think I've changed anything..

8 15

[Dovecot] 1.0-stable and nfs
by Cyril Feraudet 22 Jul '05

22 Jul '05

Hi all, I've a little pb with 1.0-stable on nfs share without lockd : with : - lock_method = dotlock - mmap_disable = yes I've : - dovecot: Jul 22 11:58:33 Error: IMAP(xxxxxxxx): open() failed with index file (null): Bad address with : - lock_method = dotlock - mmap_disable = no I've : - dovecot: Jul 22 11:59:47 Error: IMAP(xxxxxxxx): lock_method=dotlock and mmap_disable=no combination isn't supported. You don't _really_ want it anyway. Someone have an idea ? Thanks, Cyril Feraudet

2 3

[Dovecot] dovecot starts and exit immediately? - help needed
by James Sun 22 Jul '05

22 Jul '05

Since nobody answered my previous question on dovecot marking new mails as old mails, I decided to build a version of dovecot of my own to debug. I downloaded and compiled dovecot 1.0 (stable). After setting up the conf file, I ran dovecot but it exited immediate with status 0. As a result, remote client cannot connect and retrieve mails. There is no man page, and I only found two command line options, -F and -c. None of these options seem to matter. Any suggestions? I must have done something simple and wrong here. Jun

2 4

[Dovecot] Bug in 0.99.14 mbox handling - mail UIDs are renumbered without bumping UIDVALIDITY
by David McBride 22 Jul '05

22 Jul '05

Package: dovecot-imapd Version: 0.99.14-1 Severity: important Hi, I think I've identified a bug in Dovecot 0.99.14 as packaged and distributed by Debian Sarge. I believe the bug lies in the original Dovecot source, not with any modifications made by Debian. Specifically, this bug deals with Dovecot's handling of message unique identifiers (UIDs) for IMAP clients when using the mbox mailbox storage format. Some background for those not familiar with the details; (I had to look a lot of this stuff up; see also http://www.ietf.org/rfc/rfc2060.txt) --- 8< -------------------------------------------------------------- All IMAP servers are required to maintain unique identifiers for each email in an IMAP mailbox that are persistent between sessions. Dovecot stores the unique identifiers for each email in an mbox in an X-UID header. Clients which maintain a local cache of already-retrieved emails use an email's UID as a key; thus, if the UID of a particular email were to change on a server then the client's cached state would be invalid. To cope with the case that the UIDs need to be invalidated, whether because the original store has been lost or for some other reason, there is also the UIDVALIDITY number. This 32bit integer must be increased to some higher value to indicate that any previously cached email ids are now invalid. In Dovecot-managed mbox files, this number is stored in the X-IMAPbase header in the first message of that mbox and is typically the uid-invalidation time expressed in unix timestamp format (ie the number of seconds elapsed since the epoch.) --- 8< -------------------------------------------------------------- Okay, the actual bug: Dovecot routinely (and apparently unneccessarily) renumbers all of the UIDs in our mbox-backed mailboxes without updating the UIDVALIDITY count. This results in caching mail clients (such as Evolution and Thunderbird) presenting the incorrect email to the user when browsing their mail. Configuration: We are using Dovecot as a standalone daemon (ie without using inetd.) We have configured the default mail environment with the following string: default_mail_env = mbox:%h/Mail/:INBOX=%h/.email:INDEX=MEMORY ie each end-user's primary INBOX is an mbox, ~/.email, and other IMAP folders are also stored as mboxes in the directory ~/Mail/. Indexes are maintained in memory but are not stored on disk. I don't think any of the rest of the configuration is relavant, but I'm happy to detail anything else about the setup if needed. Reproducing the bug: I'm afraid I don't have a proper protocol dump demonstrating this bug, so I'm just going to describe all of the end-user steps to recreate the problem: 1) Connect to the Dovecot IMAP service with a caching mail client, such as Evolution or Thunderbird. Download a local copy of the IMAP server contents of a test mbox-backed mailbox to the local cache. For example, I have a test mbox with old root mail. Messages are numbered from 1 to 163. The most recent message has an X-UID: field of 163. 2) Delete one of the messages in the middle of the mailbox. For example, mark the second-oldest message in the mailbox, which has a UID of 2, for deletion. Expunge the mailbox. 3) The UIDs of the other messages at this point have not been altered. Disconnect from the IMAP server. (With Evolution, I actually had to restart the program to reproduce this bug.) 4) Reconnect to the IMAP service, and allow the client to re-sync. You will find that the X-UID of all of the messages after the one that was deleted have been decremented -- and, if you're using a caching client, all of the message *bodies* will appear to have been shifted down by one. Reading the headers in the mbox file directly, Dovecot has renumbered all of the UIDs from 1 to N but not altered the UIDVALIDITY field: dwm@kalimdor $ grep X-UID: Root X-UID: 1 X-UID: 2 [... all numbers between 2 and 161 follow ...] X-UID: 161 X-UID: 162 dwm@kalimdor $ grep X-IMAPbase: Root X-IMAPbase: 1063356421 162 1063356421 == Sept 2003, when the mailbox was first created. This is a bug. Either Dovecot should not renumber the UIDs of each message, or (if it really is necessary), it should increase the UIDVALIDITY field to some higher number to invalidate the caches stored by any remote clients. This bug wasn't observed when using previous versions of Dovecot (we were previously using 0.99.10.6 before this upgrade without noticing anything broken.) I'm hoping someone familiar with the source tree can identify and suggest a fix relatively quickly; failing that, I'll take a look around to see if I can work out where the problem is and implement a fix it myself. Cheers, David -- David McBride <dwm(a)tastycake.net>

1 0

[Dovecot] Changes made to imap descriptor handling in test78?
by Dominic Marks 22 Jul '05

22 Jul '05

Hello, What has changed from test77 to test78 in the way imap manages its descriptors? I upgraded to test78 this morning on a small site which I use as a testbed for testing various things. Running the same copy of my kqueue patch with test77 works quite well [*], with test78 imap has some problems. Here is some debugging output I recorded: Jul 14 12:55:27 egg dovecot: imap-login: Login: user=<dom>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, SSL Jul 14 12:55:30 egg dovecot: IMAP(dom): kqueue was given an unknown descriptor 1, -1: No such file or directory The second line points refers to io_loop_handler_remove, the tcp/ip socket (1) is having the read filter (-1) removed, suspending events from the socket, or at least, that is what should be happening. From kevent(2) for ENOENT: [ENOENT] The event could not be found to be modified or deleted. This suggests to me that we are incorrectly calling io_loop_handler_remove before we should. This error happens immediately after a client opens their mailbox. I have checked pop3 and it does not share the problem. I'm going to have a look at the CVS mail archive to see if I can work out what has changed. [*] Occasionally I was receiving ENOENT in test77 also in io_loop_handler_remove, but only occasionally, perhaps a few times a day for each client. This also didn't occur when opening the mailbox, but some time later. I'm still looking for the trigger for that. Cheers, -- Dominic Marks

2 1

[Dovecot] dovecot pop3s delivers new messages as old (unread) messages ...
by James Sun 22 Jul '05

22 Jul '05

I just set up dovecot on fedora core 3 with only pop3s protocol enabled. On my client machine, I use fetchmail to get the mail and then go through procmail and eventually ready by mutt. Everything seems to work fine, except that all new emails are marked old unread emails (i.e., marked with 'O' flag instead of 'N'). This is annoying because some open source lists are so large that I really rely on the "N" flag to read my emails. I tested the same client setting with gmail and my isp (comcast) pop3 accounts. They work fine - new mails are marked as "N". This makes me suspect dovecot is not set up correctly or something on the pop3 server machine is not right. Anybody has an idea? Thanks in advance. Jun Here are more detailed info: -bash-3.00# rpm -qa | grep dovecot dovecot-0.99.13-3.FC3 /etc/dovecot.conf: ---------------------------- protocols = pop3s imap_listen = [::] pop3_listen = [::] imaps_listen = [::] pop3s_listen = [::] ssl_cert_file = /usr/share/ssl/certs/dovecot.pem ssl_key_file = /usr/share/ssl/private/dovecot.pem login_dir = /var/run/dovecot-login login = imap login = pop3 mbox_locks = fcntl auth = default auth_mechanisms = plain auth_userdb = passwd auth_passdb = pam auth_user = root auth_verbose = no .fetchmailrc on client machine -------------------------------------- poll mypop.server.com protocol pop3 user "jsun" password "xxxx" is jsun here ssl

2 3

[Dovecot] Double Emails
by Matt Juszczak 22 Jul '05

22 Jul '05

Hi all, I originally posted this on postfix's mailing list but then realized that this COULD be a pop3 server problem since that downloads and deletes mail. This has only been happening since I upgraded from .99 to 1.0-7 ... Our users have been reporting double messages in their inbox, as well as emails that they deleted a long time ago reappearing. The only thing in my maillog is a bunch of: mbox sync: UID inserted in the middle of mailbox /home/sdf/mail/Level3 (6293 > 3) Thats happening for IMAP folder and /var/mail/* mbox folders alike. I can't seem to figure out the problem, but we have at least 50 customers calling in today alone to complain about double messages. More are probably experiencing it and just not calling. Any ideas? Thanks! -Matt

3 5

Re: [Dovecot] Update notifier
by Sebastjan Trepca 22 Jul '05

22 Jul '05

Great! Yes, of course, I just didn't knew that plugins are supported. Are there any documents on this subject? How do you add a plugin to dovecot? Just compile it and copy it to dovecot's lib/imap (like in example) ? Thanks, Sebastjan On 7/22/05, Timo Sirainen <tss(a)iki.fi> wrote: > On Fri, 2005-07-22 at 12:08 +0200, Sebastjan Trepca wrote: > > I'm trying to add a code in dovecot that will notify my services when > > a message is updated/added/moved/copied. I checked dovecot code a bit > > and mail-storage.c seems to be a nice place for tracking but I'm not > > sure if I can track all changes there. > > There are no update/move commands in IMAP, so you'll just need to hook > into saving and copying. Normally copying also goes through save unless > you're using maildir + maildir_copy_with_hardlinks=yes. > > See quota plugin for example how to hook into saving and copying: > http://dovecot.org/patches/1.0/quota.tar.gz > > Probably better to do it as a plugin than directly modify the sources, > so you don't have to keep patching it for each new release. > > > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.0 (GNU/Linux) > > iD8DBQBC4PdEyUhSUUBViskRApj9AJoCzEM8iNRNaEIcHdGxZDKoSbatFQCfaTMc > 62w52fPQr0uE8wb1A8y9kUY= > =9gtQ > -----END PGP SIGNATURE----- > > >

2 1

[Dovecot] Another minor IMAP LIST issue
by Chris Wakelin 22 Jul '05

22 Jul '05

I've just noticed that Dovecot 1.0-stable and 1.0-test78 don't include mbox folders with names beginning with "." in the IMAP LIST output. These are often used to store "hidden" folders for storing things like IMAP client configuration (e.g. Pine 4.x, IMHO, Prayer). Usually the user shouldn't be able to see these, but there are occassions when they might. It seems to me to be better to let the client decide. As I understand it, the IMAP RFC suggests that if you can "SELECT folderpath" a folder, you should also be able to list it with 'LIST "" "folderpath"' I've written a patch against 1.0-stable (it also works with test78) to add an extra namespace option "showdotfiles" (default "no"), to include folders beginning with "." (but excluding ".imap" and "." and ".." for obvious reasons!). It's used as follows :- # default namespace namespace private { separator = "/" prefix = inbox = yes showdotfiles = yes } # for backwards compatibility with UW-IMAP: namespace private { separator = "/" prefix = "mail/" hidden = yes showdotfiles = yes } ... Let me know if you find it useful! Best Wishes, Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094 diff -ruN dovecot-1.0-stable.orig/src/imap/cmd-list.c dovecot-1.0-stable/src/imap/cmd-list.c --- dovecot-1.0-stable.orig/src/imap/cmd-list.c Fri Mar 18 20:00:44 2005 +++ dovecot-1.0-stable/src/imap/cmd-list.c Wed Jul 20 16:36:51 2005 @@ -293,6 +293,8 @@ list_flags = ctx->list_flags; if (*ns->prefix == '\0' || ns->inbox) list_flags |= MAILBOX_LIST_INBOX; + if (ns->showdotfiles) + list_flags |= MAILBOX_LIST_DOTFILES; ctx->list_ctx = mail_storage_mailbox_list_init(ns->storage, cur_ref, cur_mask, list_flags); diff -ruN dovecot-1.0-stable.orig/src/imap/namespace.c dovecot-1.0-stable/src/imap/namespace.c --- dovecot-1.0-stable.orig/src/imap/namespace.c Mon Jan 31 16:37:54 2005 +++ dovecot-1.0-stable/src/imap/namespace.c Wed Jul 20 16:36:51 2005 @@ -31,7 +31,7 @@ { struct namespace *ns; const char *sep, *type, *prefix; - int inbox, hidden, subscriptions; + int inbox, hidden, showdotfiles, subscriptions; ns = p_new(pool, struct namespace, 1); @@ -40,6 +40,7 @@ prefix = getenv(t_strdup_printf("NAMESPACE_%u_PREFIX", num)); inbox = getenv(t_strdup_printf("NAMESPACE_%u_INBOX", num)) != NULL; hidden = getenv(t_strdup_printf("NAMESPACE_%u_HIDDEN", num)) != NULL; + showdotfiles = getenv(t_strdup_printf("NAMESPACE_%u_SHOWDOTFILES", num)) != NULL; subscriptions = getenv(t_strdup_printf("NAMESPACE_%u_SUBSCRIPTIONS", num)) != NULL; @@ -58,6 +59,7 @@ ns->prefix = p_strdup(pool, prefix); ns->inbox = inbox; ns->hidden = hidden; + ns->showdotfiles = showdotfiles; ns->subscriptions = subscriptions; ns->storage = mail_storage_create_with_data(data, user); if (ns->storage == NULL) { diff -ruN dovecot-1.0-stable.orig/src/imap/namespace.h dovecot-1.0-stable/src/imap/namespace.h --- dovecot-1.0-stable.orig/src/imap/namespace.h Mon Jan 31 16:37:54 2005 +++ dovecot-1.0-stable/src/imap/namespace.h Wed Jul 20 16:36:51 2005 @@ -16,7 +16,7 @@ char *prefix; size_t prefix_len; - int inbox, hidden, subscriptions; + int inbox, hidden, showdotfiles, subscriptions; struct mail_storage *storage; }; diff -ruN dovecot-1.0-stable.orig/src/lib-storage/index/mbox/mbox-list.c dovecot-1.0-stable/src/lib-storage/index/mbox/mbox-list.c --- dovecot-1.0-stable.orig/src/lib-storage/index/mbox/mbox-list.c Mon Jan 31 16:37:55 2005 +++ dovecot-1.0-stable/src/lib-storage/index/mbox/mbox-list.c Wed Jul 20 16:36:51 2005 @@ -225,13 +225,19 @@ enum imap_match_result match, match2; int ret, noselect; - /* skip all hidden files */ - if (fname[0] == '.') + /* skip all hidden files unless show dotfiles is set*/ + if (fname[0] == '.' && !(ctx->flags & MAILBOX_LIST_DOTFILES)) return 0; /* skip all .lock files */ len = strlen(fname); if (len > 5 && strcmp(fname+len-5, ".lock") == 0) + return 0; + + /* skip ".imap" "." and ".." directories in case we show dotfiles */ + if (((len == 5) && strcmp(fname, ".imap") == 0) || + ((len == 1) && fname[0] == '.') || + ((len == 2) && strcmp(fname, "..") == 0)) return 0; /* check the mask */ diff -ruN dovecot-1.0-stable.orig/src/lib-storage/mail-storage.h dovecot-1.0-stable/src/lib-storage/mail-storage.h --- dovecot-1.0-stable.orig/src/lib-storage/mail-storage.h Mon Jan 31 16:37:55 2005 +++ dovecot-1.0-stable/src/lib-storage/mail-storage.h Wed Jul 20 16:36:51 2005 @@ -16,7 +16,8 @@ MAILBOX_LIST_SUBSCRIBED = 0x01, MAILBOX_LIST_FAST_FLAGS = 0x02, MAILBOX_LIST_CHILDREN = 0x04, - MAILBOX_LIST_INBOX = 0x04 + MAILBOX_LIST_INBOX = 0x04, + MAILBOX_LIST_DOTFILES = 0x08 }; enum mailbox_flags { diff -ruN dovecot-1.0-stable.orig/src/master/mail-process.c dovecot-1.0-stable/src/master/mail-process.c --- dovecot-1.0-stable.orig/src/master/mail-process.c Tue Feb 8 10:30:11 2005 +++ dovecot-1.0-stable/src/master/mail-process.c Wed Jul 20 16:36:51 2005 @@ -175,6 +175,8 @@ env_put(t_strdup_printf("NAMESPACE_%u_INBOX=1", i)); if (ns->hidden) env_put(t_strdup_printf("NAMESPACE_%u_HIDDEN=1", i)); + if (ns->showdotfiles) + env_put(t_strdup_printf("NAMESPACE_%u_SHOWDOTFILES=1", i)); t_pop(); } } diff -ruN dovecot-1.0-stable.orig/src/master/master-settings.c dovecot-1.0-stable/src/master/master-settings.c --- dovecot-1.0-stable.orig/src/master/master-settings.c Mon Jan 31 16:37:55 2005 +++ dovecot-1.0-stable/src/master/master-settings.c Wed Jul 20 16:36:51 2005 @@ -194,6 +194,7 @@ DEF(SET_STR, location), DEF(SET_BOOL, inbox), DEF(SET_BOOL, hidden), + DEF(SET_BOOL, showdotfiles), { 0, NULL, 0 } }; diff -ruN dovecot-1.0-stable.orig/src/master/master-settings.h dovecot-1.0-stable/src/master/master-settings.h --- dovecot-1.0-stable.orig/src/master/master-settings.h Mon Jan 31 16:37:55 2005 +++ dovecot-1.0-stable/src/master/master-settings.h Wed Jul 20 16:36:51 2005 @@ -163,6 +163,7 @@ int inbox; int hidden; + int showdotfiles; }; struct server_settings {

3 5

[Dovecot] subscriptions vs mailboxlist
by Marc Perkel 22 Jul '05

22 Jul '05

Is there a way to change the name of the .subscriptions file that dovecot looks for to .mailboxlist to be compatible with WU-IMAP? It would be handy for testing and conversion if you had that. BTW - I'm a new user and your software is very well designed. -- Marc Perkel - marc(a)perkel.com Spam Filter: http://www.junkemailfilter.com My Blog: http://marc.perkel.com

2 1

[Dovecot] Errors after moving to Maildir from mbox format
by Gabe Granger 22 Jul '05

22 Jul '05

Hi All, Over the weekend I bit the bullet and migrated my entire office from server to another and converted everything from MBOX to Maildir. Althought it took ages and their we're a few little problems along the way, the migration was a complete success with no users reporting any problems(Mbox used to always cause file lock ups) or even noticing anything had changed... Which is great!:) I'm starting to see some issues currently only with my Mail. In the log files I'm getting loads of the following for at lease 20 different emails Jul 19 12:12:27 server imap(Some-user): Error parsing IMAP envelope: "Tue, 27 May 2003 16:33:07 +0100" "Re: 2U rack cases + PSU" (("Some User" NIL "some-user" "somedomain.foo")) (("Some User" NIL "some- user" "somedomain.foo")) (("Some Userr" NIL "some-user" "somedomain.foo")) (("Some User" NIL "some-user" "some-other- domain.foo")) NIL NIL "<000f01c32462$699a7130$7264a8c0@Microtech>" NIL I did a find in my Mail.app on my mac and discovered that although my client can find the message based on Subject, it fails to locate its mailbox/mailfolder when I select the message I get the following response The message from Some User <some=user(a)some-other-domain.foo> concerning “RE: 2U rack cases + PSU” has not been downloaded from the server. You need to take this account online in order to download it. The account is fully online, does or has anyone here come across this error? I'm guessing there is a problem within the email file itself. I'm using ServerSide Debian 3.1 Sendmail 8.13 Dovecot 0.99.14-1 ClientSide OSX 10.4 Mail.app Any help / pointers would be great. Gabe

2 1

[Dovecot] Corrupted indices (and accidental checkin)
by Thomas Wouters 22 Jul '05

22 Jul '05

I've seen a number of corrupted-index problems pop up on our test-dovecot servers (used by a few people at the office), and I'm wondering why corrupt indices don't just automatically get deleted ? Something like: if (!MAIL_INDEX_IS_IN_MEMORY(index)) { unlink(index->filepath); } in src/lib-index/mail-index.c:mail_index_set_error() comes to mind. It seems to me like it should work, anyway. You can still treat the error like it's currently treated (as fatal), but at least it won't pop up the next time you try to perform the same action, or trigger the same corrupted entry another way. By the way, I also noticed what is probably an accidental checkin in src/lib-storage/index/maildir/maildir-storage.c:maildir_get_control_path(), where it tries to migrate control files from the default location to the configured location. I think Timo wrote that patch for my colleage Cor, and then accidentily checked it in with: ---------------------------- revision 1.100 date: 2005-06-09 14:31:43 +0000; author: cras; state: Exp; lines: +22 -4 Replaced ':' and ',' character usages with #defines, so they can be changed easily if needed. The patch is 'broken' anyway; it tries to use rename() to move the old control files to the new location, but that doesn't quite work between different filesystems (and that happens to be what we want to do ;). A better way to handle it would probably be to read in the data from the old location, and then write it out to the new location, in a normal load/save procedure. But I think we'll just do the move manually, after all, as it's just a few dozen different accounts at the moment. I'm not sure about the value of the 'implicit' controlfile migration that dovecot currently does. -- Thomas Wouters <thomas(a)xs4all.net> Hi! I'm a .signature virus! copy me into your .signature file to help me spread!

2 1

[Dovecot] Few questions
by Sebastjan Trepca 22 Jul '05

22 Jul '05

Is there a way to list all keywords a mailbox uses? I fetch flags for all messages and then gorup them, but this is a very nasty solution. What's the situation with full text search? Will it ever be implemented? Is it already? Text search on my 0.99.14 is quite slow. Don't understand why no IMAP server wants to implement this feature. Does Dovecot support plugins? Thank you, Sebastjan

2 3

[Dovecot] CR LF in stable
by Thomas Hummel 22 Jul '05

22 Jul '05

Hello, It seems that mbox format mailboxes holding \r\n (CR + LF) character sequences (instead of \n only) still cause assertion failures when moving messages from one folder to another. -- dovecot: Jul 19 17:14:52 Error: IMAP(dovetest): file istream-raw-mbox.c: line 38 3 (istream_raw_mbox_get_body_size): assertion failed: (rstream->body_offset != ( uoff_t)-1) -- I seems to work in -test78 though. Is there any plan to handle this in -stable branch ? -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Pôle informatique - systèmes et réseau

2 1

[Dovecot] deleting folders containing subfolders with thunderbird (mbox format) bug
by John Bramley 22 Jul '05

22 Jul '05

When using Thunderbird (dovecot-0.99.13-3.FC3) on Fedora connecting to dovecot-0.99.13-3.FC3 I am having problems deleting folders which have been created with the 'Allow your new folder to contain: Folders only' option picked. The folder appears to get deleted but upon restarting Thunderbird the folder still appears to be there but clicking on it I get the error: 'The current command did not succeed. The mailserver responded: Mailbox doesn't exist: <mailbox name>'. Upon investigation when creating and deleting a folder called 'bilbo' to contain subfolders only: Thunderbird sends 'create bilbo/' imap command and then 'subscribe bilbo/' Dovecot creates a directory 'bilbo' and adds 'bilbo/' to the .subscriptions file which all works ok. Upon trying to delete the folder and confirming that it should be deleted Thunderbird sends: 'delete bilbo/' dovecot replies 'OK Delete completed' Then thunderbird sends 'unsubscribe bilbo/' dovecot replies 'NO Invalid mailbox name' which Thunderbird ignores and all seems to have gone ok until thunderbird is restarted and the folder reappears in the folder list but nothing can be done with it. I believe that if a client sends an 'unsubscribe' command to a mailbox that is currently subscribed the imap server should unsubscribe it - even if the actual mailbox doesn't exist (unsubscribe and then delete seems to work when testing using telnet to port 143 to send imap commands). Dovecot does allow mailboxes to be unsubscribed if they don't exist if they don't have a tailing '/' character (so deleting folders set to contain only messages in Thunderbird works ok). I expect that everything works ok using Maildir mailboxes because then there is no need to mark folders containing folders with a '/' because all folders can contain messages and folders. For my own purposes I have hacked the mbox_get_mailbox_name_status function in src/lib-storage/index/mbox/mbox-storage.c to add a check to see if the mailbox name is already subscribed to and if it is then return status = MAILBOX_NAME_EXISTS, before the 'if (!mbox_is_valid_create_name(storage, name))' check which is returning status = MAILBOX_NAME_INVALID, which seems to work ok for me. UW-imap works ok I'm surprised at this bug (or am I doing something completely wrong), surely lots of people use Thunderbird with dovecot, do they not create sub-folders in folders, or are they all using Maildir format, or do they never find the 'Server supports folders that contain sub-folders and messages' advanced option so they are never able to create folders within folders in the first place? John.

2 1

[Dovecot] Failed to create storage with data - possible reasons?
by vmstech 22 Jul '05

22 Jul '05

Hi I'm getting this error with my attempt at setting up dovecot for virtual mail accounts: Failed to create storage with data: /home/vhostpath/usersname/Maildir/ I cant establish any cause. I dont think its permissions as it was saying 'Permission denied' till I fixed that and the UID and GID are those of the directories owner. I was prompted bythe log files to set the minimum and maximum uid range, which made the prompt go away, but I still have this problem. Can anyone tell me what else might cause this error? Thanks glenn

2 2

[Dovecot] Dovecot 0.99.11 config
by nickr 22 Jul '05

22 Jul '05

I am at wits end...So far it seems dovecot is light years ahead of UW-IMAP. Glad to have UW-IMAP behind me...well almost. My setup = Sendmail 8.13.4 with Procmail delivery to /var/spool/mail/<userfile> openssl 0.9.8 dovecot 0.99.11 I want to continue to use the standard mbox with all the user's mail stored in /var/spool/mail/<userfile>. User's are known to this mail server via NIS and ALL data is mounted accress NFS in read only mode on this machine, including ~home directories. I want to run dovecot like UW-IMAP...trying to keep it simple-->mail delivery to mbox /var/spool/mail/<username>. My /etc/dovecot.conf: I tried both default_ mail_env = INBOX:/var/spool/mail/%u:INBOX:INDEX=MEMORY with and with out the INBOX:INDEX=MEMORY I want to disable the indicies feature. We don't need it we're about 20 engineers or so who want to continue to use the /var/spool/mail mbox-the original Sendmail location. Most users are downloading every piece of mail through OutHouse or Pine, aka OutLook. I keep getting failed to create storage meaages in /var/log/maillog... Jul 21 15:53:26 mailtest pop3-login: Login: nickr [::ffff:172.26.64.2] Jul 21 15:53:26 mailtest pop3(nickr): Failed to create storage with data: INBOX:/var/spool/mail/nickr Jul 21 15:53:26 mailtest dovecot: child 4773 (pop3) returned error 89 Permissions info for /var/spool/mail/nickr: drwxrwxrwt 3 root mail 4096 Jul 21 15:43 mail [root@mailtest mail]# ls -la nickr total 4204 drwxrwxrwx 2 nickr mail 4096 Jul 21 15:19 . drwxrwxrwt 3 root mail 4096 Jul 21 15:43 .. -rwxrwxrwx 1 nickr ftp 0 Jul 21 14:56 inbox -rwxrwxrwx 1 nickr mail 2375 Jul 21 15:12 msg.FAUO -rwxrwxrwx 1 nickr mail 4256870 Jul 20 16:55 nickr As you can see I am spoping just fine.... Thanks in advance for ANY help!!!!!!!!!

2 1

[Dovecot] Update notifier
by Sebastjan Trepca 22 Jul '05

22 Jul '05

Hi, I'm trying to add a code in dovecot that will notify my services when a message is updated/added/moved/copied. I checked dovecot code a bit and mail-storage.c seems to be a nice place for tracking but I'm not sure if I can track all changes there. Does anyone have any experience with this topic or ideas? Thanks, Sebastjan

2 1

[Dovecot] passwd-file command doesn't support %d
by Marc Perkel 22 Jul '05

22 Jul '05

Trying this and it doesn't work: passdb = passwd-file /etc/vmail/test.%d Apparently it doesn't expand the %d according to the log file. -- Marc Perkel - marc(a)perkel.com Spam Filter: http://www.junkemailfilter.com My Blog: http://marc.perkel.com

2 1

[Dovecot] Dovecot vs.Clients - strange behaviour, diagnostics sought
by Jeroen Scheerder 22 Jul '05

22 Jul '05

I've been experimenting with dovecot-1.0-stable on Solaris. Storage format is mbox. Dovecot, in test, runs in parallel with an UW IMAP, with dovecot running SSL-only on port 994. It seems to work to some extent: * dovecot runs * authentication works * SSL works * all manual IMAP functionality checks seem to work fine However, I'm running into issues with IMAP clients. * Null client: I started by using telnet as a client, and talking IMAP manually. Seems OK. * Mutt: "mutt -f imap://my.imap.server:994" seems to work well, although mutt keeps reporting details about the SSL certificate, informs me that it belongs to the proper server and is a valid Globalsign-issued certificate -- and keeps insisting I either reject it or accept it once. * Apple Mail (Panther's version, 1.3.11 (v622)) works, though it seems to have problems with large mailboxes. Then again, it had these same problems with other IMAP servers as well. * Thunderbird doesn't work at all. After some waiting, it bums out and reports: Unable to connect to your IMAP server. You may have exceeded the maximum number of conenctions to this server. If so, use the Advanced IMAP Server Settings dialog to reduce the number of cached connections. Note that it never even shows an authentication dialog, and the only thing I see in dovecot's log that relates to Thunderbirds attempt is: dovecot: Jul 20 09:41:09 Info: imap-login: Disconnected: \ Inactivity [131.211.143.87] I'm at a loss as to what's causing this. On the one hand, dovecot seems operational, on the other hand at least one client can do nothing with it. All debugging/logging options are enabled. What am I missing?

5 8

[Dovecot] bug in dovecot search
by Cor Bosman 22 Jul '05

22 Jul '05

A007 search from phyllis * SEARCH 484 A007 UID SEARCH CHARSET "US-ASCII" ALL FROM {7} phyllis * SEARCH 007 UID SEARCH CHARSET "US-ASCII" ALL FROM "phyllis" * SEARCH Regards, Cor

3 3