October 2005 - dovecot

RE: [Dovecot] Starting Dovecot at the boot time.
by Diehl, Brian 06 Oct '05

06 Oct '05

chkconfig --level 345 dovecot on you can also do a ntsysv [runlevel] ________________________________ From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On Behalf Of SUPER POSTFIX Sent: Thursday, October 06, 2005 7:30 AM To: dovecot(a)dovecot.org Subject: [Dovecot] Starting Dovecot at the boot time. Dear All, I am new to Dovecot, so please help me to overcome the following problem. I have installed postfix + Dovecot in Redhat EL 3. I have installed them from the source codes. Problem is that how can I start Dovecot at the boot time? Regards Indrajith

1 0

[Dovecot] Starting Dovecot at the boot time.
by SUPER POSTFIX 06 Oct '05

06 Oct '05

Dear All, I am new to Dovecot, so please help me to overcome the following problem. I have installed postfix + Dovecot in Redhat EL 3. I have installed them from the source codes. Problem is that how can I start Dovecot at the boot time? Regards Indrajith

1 0

[Dovecot] Dovecot and dracd?
by Dominik Werder 06 Oct '05

06 Oct '05

Hello everyone, how can I get dovecot to work with drac? I have already compiled this little module from the wiki, but I dont know how to tell dovecot to load the module... thanks! Dominik

1 1

[Dovecot] Still crashing with test-80
by Matt Juszczak 05 Oct '05

05 Oct '05

Here is the log over a 12 hour period: pid 91923 (pop3), uid 25039: exited on signal 6 pid 98265 (pop3), uid 25039: exited on signal 6 pid 95547 (pop3), uid 25039: exited on signal 6 pid 235 (pop3), uid 25039: exited on signal 6 pid 239 (pop3), uid 25039: exited on signal 6 pid 318 (pop3), uid 25039: exited on signal 6 pid 386 (pop3), uid 25039: exited on signal 6 pid 415 (pop3), uid 25039: exited on signal 6 pid 427 (pop3), uid 25039: exited on signal 6 pid 434 (pop3), uid 25039: exited on signal 6 pid 468 (pop3), uid 25039: exited on signal 6 pid 653 (dovecot-auth), uid 0: exited on signal 6 (core dumped) Here is the GDB Backtrace: orion# gdb /usr/local/libexec/dovecot/imap dovecot-auth.core GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-marcel-freebsd"...(no debugging symbols found)... warning: core file may not match specified executable file. Core was generated by `dovecot-auth'. Program terminated with signal 6, Aborted. #0 0x181327af in ?? () (gdb) bt full #0 0x181327af in ?? () No symbol table info available. #1 0x18127856 in ?? () No symbol table info available. #2 0x0000028d in ?? () No symbol table info available. #3 0x00000006 in ?? () No symbol table info available. #4 0x00000000 in ?? () No symbol table info available. #5 0x00000000 in ?? () No symbol table info available. #6 0x00000286 in ?? () No symbol table info available. #7 0x181abf4c in ?? () No symbol table info available. #8 0xbfbfea78 in ?? () No symbol table info available. #9 0x1819b0df in ?? () No symbol table info available. #10 0x00000006 in ?? () No symbol table info available. #11 0xbfbfea48 in ?? () No symbol table info available. #12 0x00000000 in ?? () No symbol table info available. #13 0x1819b0aa in ?? () No symbol table info available. #14 0x00000001 in ?? () No symbol table info available. #15 0x18095400 in ?? () No symbol table info available. #16 0xffffffdf in ?? () No symbol table info available. #17 0xffffffff in ?? () No symbol table info available. #18 0xffffffff in ?? () No symbol table info available. #19 0xffffffff in ?? () ---Type <return> to continue, or q <return> to quit--- No symbol table info available. #20 0x18072a11 in ?? () No symbol table info available. #21 0x18095000 in ?? () No symbol table info available. #22 0x00000150 in ?? () No symbol table info available. #23 0x0807a000 in mail_cache_header_fields_read () No symbol table info available. #24 0x08071000 in istream_raw_mbox_next () No symbol table info available. #25 0x00000000 in ?? () No symbol table info available. #26 0x080710d0 in istream_raw_mbox_seek () No symbol table info available. #27 0x083c1ac0 in ?? () No symbol table info available. #28 0xbfbfea98 in ?? () No symbol table info available. #29 0x0805efd4 in imap_thread () No symbol table info available. Previous frame inner to this frame (corrupt stack?) (gdb) Thanks in advance for any help anyone can provide. -Matt

3 6

[Dovecot] I need to enable percent hack in dovecot logins
by Eero Volotinen 05 Oct '05

05 Oct '05

I am using dovecot with vpopmail and qmail and problems is percent hack that works with qmail-pop3d does not work with dovecot. So login works like that: firstname.lastname%domain.ext I need that function to work with dovecot too, and I am using stable 0.99.x series of dovecot. Problem is that some Apple machines client can't use at-symbol in their login names. So, where I need to hack sources to convert % -> @ to get login working. By default percent-hack does not work with dovecot. Any help? Thanks. -- Eero

2 5

[Dovecot] Re: partial sync?
by Paul 05 Oct '05

05 Oct '05

Jim Tittsler asked: > I haven't encountered that one. Does it persist? I've seen it four times now in the five hours since the upgrade. Never twice in the same mailbox, for what that's worth. I'll keep an eye on it. Paul

1 0

[Dovecot] Changing pop3_uidl_format
by Jeff Simmons 05 Oct '05

05 Oct '05

I recently set up an OpenBSD - Dovecot mail server for a client. Naturally (according to Murphy's Law) they want to use Outlook 2003, pop3s, and leave messages on the server. And just as naturally, the UIDLs don't seem to be working, and when they download mail, they get EVERY email stored on the server, not just the new ones. Other than switching them over to IMAP, I found the following in the Wiki documentation: #POP3 UIDL format to use. You can use following variables: # %v - Mailbox UIDVALIDITY # %u - Mail UID # %m - MD5 sum of the mailbox headers in hex (mbox only) # %f - filename (maildir only) #If you want UIDL compatibility with other POP3 servers, use: # UW's ipop3d : %08Xv%08Xu # Courier version 0 : %f # Courier version 1 : %u # Courier version 2 : %v-%u # Cyrus (<= 2.1.3) : %u # Cyrus (>= 2.1.4) : %v.%u #Note that Outlook 2003 seems to have problems with %v.%u format which is #Dovecot's default, so if you're building a new server it would be a good #idea to change this. %08Xu%08Xv should be pretty fail-safe. pop3_uidl_format = %v.%u So my question is, what happens if I just change pop3_uidl_format to %08Xu%08Xv and restart the server? Will it just change things over to the way I want them, or will it blow up all the existing mail already being stored there? Inquiring minds want to know. Thanks for any help you can provide. -- Jeff Simmons jsimmons(a)goblin.punk.net Simmons Consulting - Network Engineering, Administration, Security "It was on fire when I got here."

2 1

[Dovecot] partial sync?
by Paul Adams 05 Oct '05

05 Oct '05

I just installed the latest alpha on Debian Sarge and am getting a lot of this sort of error: Oct 4 16:18:58 tarsier dovecot: imap-login: Disconnected: rip=70.209.254.178, lip=192.168.50.105, TLS Oct 4 16:19:04 tarsier dovecot: imap(jeff): mbox sync: UID inserted in the middle of mailbox /home/jeff/mail/Junk (329 > 274, seq=2, idx_msgs=55) Oct 4 16:19:07 tarsier dovecot: imap(jeff): mbox sync: UID inserted in the middle of mailbox /home/jeff/mail/inbox (4813 > 2434, seq=2, idx_msgs=1771) and Oct 4 16:25:40 tarsier dovecot: imap-login: Disconnected: Inactivity: rip=70.209.254.178, lip=192.168.50.105, TLS Oct 4 16:26:33 tarsier dovecot: imap(jeff): UIDs broken with partial sync in mbox file /home/jeff/mail/spam which I never saw before. What does it mean? Should I be concerned? Paul

2 1

[Dovecot] using local-part delimiters in LDA delivery?
by OpenMacNews 03 Oct '05

03 Oct '05

hi all, i've exim 4.53RC2 + dovecot-cvs on OSX 10.4.2. i'm working on implementing recipient-delimiters for delivery from exim to a user's imap store using dovecot's cvs-lda. reading on the wiki (Jakob's latest comments?): " ... the part after the delimiter is passed to the lda as an additional parameter. so dovecot-lda should handle that parameter and leave the separator handling to the MTA. The MTA has to handle it anyway." it looks likes it's possible ... with appropriate changes in exim to my router: dovecot_localuser: driver = accept domains = +local_domains local_part_suffix = +* local_part_suffix_optional transport = dovecot_lda and transport: dovecot_lda: driver = pipe command = /.../deliver \ -c /.../dovecot-deliver.conf \ -d $local_part@$domain message_prefix = "" message_suffix = "" delivery_date_add envelope_to_add return_path_add log_output user = MY_MAIL_USER i'd like to be able to build delivery conditions in dovecot so that, e.g. mail to: bob(a)mydomain.com is delivered to "bob"'s default INBOX. but, mail to: bob+spam(a)mydomain.com is delivered to any specified (either a server-wide common relative path, or a user-specified) SUBFOLDER, say "bob/INBOX/.../.../spam_to_look_at" defined by a dovecot-rule invoked by the delimiter "spam" ... this is a little different than the approach Mark mentioned of delivering directly to folder_name specified by the local-part-after-delimiter ... questions: (1) until the two conf files merge, i'm guessing there needs to be some conditional logic in dovecot-deliver.conf rather than in dovecot.conf. correct? or should i be thinking SIEVE rules? (2) exactly WHAT "additional part" do i grab in dovecot? thx! richard

3 5

[Dovecot] can't access dovecot IMAP account w/TBird ... ok w/ other clients
by OpenMacNews 03 Oct '05

03 Oct '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi all, i'm using dovecot --version 1.0.alpha3 dovecot --build-options Build options: ioloop=poll openssl postgresql Passdb: checkpassword pam passwd passwd-file sql Userdb: checkpassword passdb passwd passwd-file sql static on OSX 10.4.2. i've set up for maildir: format PLAIN text AUTH, w/ "disable_plaintext_auth = yes" TLS support Private/, Public/ Shared/ namespaces login and access with my Mulberry MUA has been just fine. however, attemtping to access with Thunderboird v107 has been completely unsuccessful. T-Bird's "Server Settings" for my user are config'd as: Server Type: IMAP MailServer Server name: mail.testdomain.com Port: 993 Default: 993 User name: testuser(a)testdomain.com [X] User secure connection (SSL) [ ] User secure authentication on access, T-Bird's status bar shows "Openeing folder ...", but never continues on any further. i never see my mailboxes, Namespaces, etc, as I do in Mulberry. my dovecot log shows: dovecot: 2005.10.02 14:29:26 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=172.30.11.5 rip=172.30.11.6 dovecot: 2005.10.02 14:29:26 Info: auth(default): client out: CONT 1 dovecot: 2005.10.02 14:29:26 Info: auth(default): client in: CONT 1 AGJsYWtlcnNAb3BlbmV4ZWMuY29tAGJsYWtlcnM= dovecot: 2005.10.02 14:29:26 Info: auth(default): client out: OK 1 user=testuser(a)testdomain.com dovecot: 2005.10.02 14:29:26 Info: auth(default): master in: REQUEST 111 28213 1 dovecot: 2005.10.02 14:29:26 Info: auth(default): master out: USER 111 testuser(a)testdomain.com uid=42 gid=42 dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): Effective uid=42, gid=42 dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): Namespace: type=private, prefix=Private/, sep=/, inbox=yes, hidden=no, subscriptions=no dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): maildir: data=/var/Mail/MailHome/Domains/testdomain.com/Accounts/t/testuser/Maildir:… dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): maildir: root=/var/Mail/MailHome/Domains/testdomain.com/Accounts/t/testuser/Maildir, index=/var/Mail/MailHome/indexes/testdomain.com/testuser, control=, inbox= dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): Namespace: type=public, prefix=Public/, sep=/, inbox=no, hidden=no, subscriptions=no dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): maildir: data=/var/Mail/MailHome/Domains/testdomain.com/Public/Maildir:INDEX=/var/Ma… dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): maildir: root=/var/Mail/MailHome/Domains/testdomain.com/Public/Maildir, index=/var/Mail/MailHome/indexes/testdomain.com/public, control=, inbox= dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): Namespace: type=shared, prefix=Shared/, sep=/, inbox=no, hidden=no, subscriptions=no dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): maildir: data=/var/Mail/MailHome/Domains/testdomain.com/Shared/Maildir:INDEX=/var/Ma… dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): maildir: root=/var/Mail/MailHome/Domains/testdomain.com/Shared/Maildir, index=/var/Mail/MailHome/indexes/testdomain.com/shared, control=, inbox= dovecot: 2005.10.02 14:29:26 Info: imap-login: Login: u:<testuser(a)testdomain.com>, rIP:[10.0.0.6], lIP:[10.0.0.5], IMAP, plain, TLS which looks ok to me (?). fwiw, TBird can access TLS+Plain accounts on CGatePro & CyrusIMAP accounts i've tried w/ no problem ... any suggestions/thoughts? cheers, richard -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (Darwin) iEYEARECAAYFAkNAUvsACgkQGnqMy4gvZ6GT7QCghiGiPyybvS8H8aFbVzwdAtT2 s/0An3pi2t8xa1aWrd3WDrnxdC8CaHo0 =a69w -----END PGP SIGNATURE-----

1 0