April 2006 - dovecot - dovecot.org

[Dovecot] IMAPS - timeout while moving mails
by Petar Bogdanovic 12 Apr '06

12 Apr '06

Hi, I'm using Dovecot v1.0.beta5 (NetBSD 3.0, i386) and Mozilla Thunderbird 1.5 (XP, i386). My dovecot.conf is pretty simple, because I just use dovecot for me as the only user. However, when I try to move a 'larger' amount of mails (>200) from my local TB-mbox to the remote IMAPS-storage, the process hangs after about 150 - 160 transferred mails (the 'blocking' mail is _never_ the same). I don't have the slightest clue why - there is nothing in the logs - even if I turn 'verbose_ssl' on. After a while, TB tells me, that the server timed out and dovecot says: "imap(petar): Disconnected" Usually - if I close my MUA correctly - dovecot says: "imap(petar): Disconnected: Logged out" Is somebody maybe experiencing something similar? Thank you very much & with kind regards, Petar Bogdanovic

4 6

[Dovecot] 1.0beta5 released
by Cesar Mesias 12 Apr '06

12 Apr '06

Dear friends, I am trying to upgrade dovecot 1.0-alpha3 to dovecot 1.0-beta 5, but I have some problems to do that. When I install its rpm I get a message which indicates I have to install some dependences such as openssl-0.9.7f-7.i386, sqlite-3.2.8-1.9.el4 and libk5crypto.so.3. I haven't had any problems with openssl and sqlite but I always get a message that I need to have the libraries of libk5crypto. I realised that I have these libraries, but I get the same message, which is the following: [root@server]rpm -ivh openssl-0.9.7f-7.i386.rpm warning: openssl-0.9.7f-7.i386.rpm: V3 DSA signature: NOKEY, key ID 4f2a6fd2 error: Failed dependencies: libk5crypto.so.3(k5crypto_3_MIT) is needed by openssl-0.9.7f-7.i386 libkrb5.so.3(krb5_3_MIT) is needed by openssl-0.9.7f-7.i386 I appreciate so much if you could send me the steps that I have to do to make the upgrade without problems. I have Red Hat Enterprise Linux 4.0 I am looking forward from hearing you soon. Thanks for your time. Regards, Cesar

2 1

[Dovecot] sqlrelay
by Alexandre Busquets 12 Apr '06

12 Apr '06

Is possible works with sqlrelay

1 0

[Dovecot] beta5 no ssl (imaps) connection
by Elimar Riesebieter 11 Apr '06

11 Apr '06

Hi all, running beta 5 doesn't allow ssl connections: SASL authentication failed Same config runs well with beta3. I tried as well latest CVS, but this gives me the same error. Verbose debug output: dovecot: 2006-04-09 17:17:51 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=192.168.200.1 rip=192.168.200.202 dovecot: 2006-04-09 17:17:51 Info: auth(default): client out: CONT 1 dovecot: 2006-04-09 17:17:51 Info: auth(default): client in: CONT<hidden> dovecot: 2006-04-09 17:18:51 Info: imap-login: Disconnected: Inactivity: method=PLAIN, rip=192.168.200.202, lip=192.168.200.1, TLS If I logged in on the dovecot server itself, the connection is estabilished. I guess it's only a change in the config, but which? Elimar -- Do you smell something burning or ist it me?

1 0

[Dovecot] phantom new mail (mailboxes keep on being reported as having new mail)
by Grobian 11 Apr '06

11 Apr '06

Hi, I'm using dovecot 1.0_beta3 on Gentoo Linux, and am experiencing a problem of what I call 'phantom mail'. This problem I have for a long time (pre 1.0), but at the moment I'm using 1.0_beta3 and the problem still is in there. My setup is as follows: - regular x86 box - running Exim and Dovecot - Exim saves new mail in maildir format in a local filesystem /mail/user/blabla - Dovecot reads and serves IMAP from local filesystem /mail/user/blabla - client is Mutt and/or Thunderbird from any OS (Mac, Linux, Windows) via IMAP Situation that happens: I get new mail in a folder, say =news (in Mutt style, it's .news dir in the maildir directory). I read the item, Mutt (or Thunderbird) marks the item as read (moving it over to cur aswell I think), save the folder, then move on to another folder. At this point dovecot IMAP server indicates to the client that there is new mail in the folder =news. If I visit the folder with the client, I see no new mail, and sometimes I have two or three of those folders, and I can keep on cycling with Mutt till I get bored :). Before upgrading Dovecot, I knew of no way to resolve this problem; eventually, it seemed that at some point the folder seemed to figure out itself that there was indeed no new mail. Sometimes I could trick it by letting Mutt mark the mail as new again, and then save the folder. Didn't always work. Now, I think a week or two ago I upgraded Dovecot and had to manually move all the .subscription files, and I also in one go decided to remove the dovecot* and .imap* files. That cleaned up, and at first that looked like it solved my problem. Not. So I figured out throwing away dovecot's index stuff (rm dovecot* in the directory that shows phantom mail) resolves the problem. However, this method starts to get annoying so to say. So, I did some investigation and found out that the dovecot-uidlist file seems to be not up-to-date on a folder that shows phantom mails: # awk '{ print $2 }' dovecot-uidlist | sort > tmp.uids # ls cur | sort | diff -u - tmp.uids --- - 2006-03-08 17:45:26.428168000 +0100 +++ tmp.uids 2006-03-08 17:45:19.000000000 +0100 @@ -47,4 +47,5 @@ 1141340181.H111425P8973.hermes.orakel.ods.org:2,S 1141387968.P13010Q0M35974.hermes:2,S 1141528391.H769531P12886.hermes.orakel.ods.org:2,S -1141830301.H349821P23427.hermes.orakel.ods.org:2,S +1141544380 +1141830301.H349821P23427.hermes.orakel.ods.org It seems the dovecot uidlist doesn't have the right name for the file on disk, probably therefore "seeing" a new file all the time and reporting the folder as having new mail. The 1141544380 entry comes from the first row of the dovecot-uidlist file: 1 1141544380 51 I guess it's just some sort of line to keep track of the last timestamp and the number of messages or something. If my theory is right here then it looks as if the 'bad entry' is actually more recent than this most recent timestamp reports. But this is only speculation of course. Enough for this lenghty mail I guess. Is this a known issue, or can it be caused by the way I set up my system? I must note that this only happens for some folders, not all of them. I have folders which get a lot of mail, but don't have this happening on. Any clues go resolve this are welcome. Regards, -- Fabian Groffen

4 9

Re: [Dovecot] Dovecot's as ip/user based login filter?
by Sysadmin 11 Apr '06

11 Apr '06

Tere. > Actually I do not know wheter Dovecot can do it by itself. > On my server I use a customized PAM-Module to authenticate and authorize > my users. The module also performs a check on the host where the users > comes from and checks wheter there is a rule to allow/deny access from > this host. > > I know this setup sounds an bit exotic, but it works quite nice for me > with the advantage to use this feature within other services than dovecot. > > It's sounds wonderful. Can You kindly share this customized pam module for me? -- Sysadmin

2 2

[Dovecot] SSHA Password Hashing
by Gavin Young 11 Apr '06

11 Apr '06

We are currently running a production mail server using version 0.990.99.11-2 (latest RPM from RHEL/CentOS). We would like to migrate more virtual domains off our courier imap server to dovecot but the courier imap user passswords are stored in LDAP and are SSHA hashed which is not supported by our current version of dovecot (CRYPT only). >From reading the mailing lists this feature is now available but I am hesitant to move a production server to a beta software release. Apart from waiting for a 1.0-final RPM, what is the simplest/best way for us to allow dovecot to read existing SSHA hashed passwords within LDAP? Any help would be much appreciated. Gavin

1 0

[Dovecot] anyone running with Horde mail?
by interfaSys sàrl - Rich Internet Applications 10 Apr '06

10 Apr '06

We have the exact same problem. Everything is fine with beta3, but the latest betas have problems with Horde. We are using FreeBSD and Horde 3.1. The logs show connections from 127.0.0.1. Login is successful, but the user is immediately disconnected. Best regards, Olivier Paroz interfaSys sàrl > Yes, our horde/imp webmail servers use dovecot beta3 with no > problems. > > We are running horde 2.2.5 on on Solaris 10 boxes. Dovecot uses pam > on the imap server (a Solaris 9 box). I've had no luck with beta4 > or beta5 so far. > > Jeff Earickson > Colby College

4 4

[Dovecot] Re: LDAP authentication via PAM
by Oscar A. Valdez 10 Apr '06

10 Apr '06

Luis Meléndez escribió: > Oscar A. Valdez wrote: > > I've configured dovecot to authenticate against a Fedora Directory > > Server. The mail server on which dovecot is installed has the > > nss_ldap and pam_ldap packages installed, and /etc/dovecot.conf has the > > following two lines: > > > > auth_userdb = ldap /etc/dovecot-ldap.conf > > auth_passdb = pam > > ... > > Is it possible to access the user database through PAM (auth_userdb = > > pam)? Since I'm running the nss_ldap and pam_ldap modules, it'd really > > be an LDAP query for users, and a query in /etc/passwd and /etc/group > > for dovecot (since it's a local user and group on the mail server). > > If you are using nss_ldap and have edited /etc/nsswitch.conf > accordingly, you should get it done with: > > auth_userdb = passwd > > It doesn't mean to use /etc/passwd, but the O.S. nss mechanism. Before trying to Luis' suggestion, I had the following in /var/log/messages: dovecot(pam_unix)[4691]: check pass; user unknown dovecot(pam_unix)[4691]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= dovecot-auth[4691]: pam_ldap: could not open secret file /etc/ldap.secret (No such file or directory) I suppose the first two entries are the lookup for the dovecot user in the DS, where it doesn't exist. And since I want anonymous binds to the DS, I haven't created file /etc/ldap.secret. Users were able to authenticate and get their mail. After changing to auth_userdb = passwd, all the messages went away, but the users weren't able to get their mail: Evolution gave me the following error: "Unable to get a valid greeting" from the mailserver. I went back to auth_userdb = ldap /etc/dovecot-ldap.conf, and then back to auth_userdb = passwd. Users can get their mail, but the messages are back in the log file. I'd appreciate help in understanding this behavior. -- Oscar A. Valdez

2 1

Re: [Dovecot] anyone running with Horde mail?
by interfaSys sàrl - Rich Internet Applications 10 Apr '06

10 Apr '06

I have: Imp, turba, ingo, kronolith, nag and mnemo. Auth is done through IMP. servers.php contains this: $servers['dovecot'] = array( 'name' => 'IMAP Server', 'server' => 'localhost', 'hordeauth' => 'full', 'protocol' => 'imap/notls', 'port' => 143, 'folders' => '', 'namespace' => '', 'maildomain' => '', 'smtphost' => '', 'smtpport' => 25, 'realm' => '', 'preferred' => '', 'acl' => array( 'driver' => 'rfc2086', ), 'dotfiles' => true, 'hierarchies' => array() ); PEAR Auth_SASL is installed Best regards, Olivier Paroz interfaSys sàrl > I have it working now with FreeBSD, the latest HOrde, and the > latest dovecot. > > What other Horde components do you have installed, and how do you > have > the authentication set up.

1 0