March 2007 - dovecot - dovecot.org

[Dovecot] [PATCH] fix gcc warnings in 1.0rc26
by Max Kellermann 15 Mar '07

15 Mar '07

Hi, I have made a small patchset to fix some of the GCC warnings. With these patches, I was able to compile dovecot r_1_0_rc26 with the following options: -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast Wstrict-prototypes -Wredundant-decls -Wcast-align -Wwrite-strings Wpacked -Winline -Wdisabled-optimization -Wno-long-long -Wundef Wfloat-equal -Wsign-compare -Waggregate-return -Werror Some of the changes may be arguable, escpecially the const warning fixes, example: char *pass = ""; I changed that to "pass = NULL" and changed the function call: - auth_request_verify_plain(request, pass, + auth_request_verify_plain(request, pass == NULL ? "" : pass, In other sources, I added "const" to parameters or to the return value where it seemed to make sense and didn't cause harm. Dealing with the const problem can be tricky, and sometimes dirty deconstification hacks are the only way to go.. however I believe we should always turn on "-Wconst" and explicitly add manual deconstitication where we assume it's not dangerous. I didn't fix all "const" and "missing noreturn" warnings, but my patches may be a good start... if there is further interest in fixing all of them, I'd be glad to do it. Max

2 1

[Dovecot] Problems with seen flag on OS X mail
by Nicolas Cianca 15 Mar '07

15 Mar '07

I'm having a problem with dovecot and apple mail not always remembering the seen flag. Some cases when mail is read it stays that way but other times it reverts back to unread on the next connection. I've tried to rebuild the Apple Mail mailbox but that doesn't do it. The mail is stored in Maildir format in the users home directory. All the connections Apple Mail are done via IMAP. I'm currently running rc27 on Centos and this has been ongoing since I switched from cyrus about 3 months ago. Any suggestions? nicolas cianca LIGHTBULB ncianca(a)lightbulb.com

2 1

[Dovecot] mbox and pop3, maildir and imap
by Hans Lammerts 15 Mar '07

15 Mar '07

Hi, Been reading a lot of posts about dovecot configuration, but can't really figure out if what I want is even possible or how to achieve this. My setup is simple : One linux machine that collects mail from my provider and sorts them for me and my wife, where my email is stored in Maildir format in ~myuser/.maildir and my wife's email is stored in mbox format in /var/spool/mail. Before making my wife crazy with a new way of getting and reading email with IMAP, I tried to do the following : My PC (not the linux server) runs either linux or XP, and the client I'm using is Evolution 2.8.2.2. I can get my email using IMAP without problems. My wife's PC just runs XP and the email client is Outlook which gets its email from the linux server through pop3. I've setup Dovecot to service both IMAP and POP3. The default_mail_env is now set to maildir:~%u/.maildir (which of course only reflects Evolution's IMAP need on my own PC) Now for the big question: How can I achieve that when I get email from the server using IMAP, I will automatically just look in the Maildir location (~%u/.maildir) __AND__ when my wife logs on through POP3, dovecot will only look for her email in her mbox directory /var/spool/mail/... ? In other words, different protocols used by (two) different users need to look for email in different locations (maildir and mbox). I tried to get this working using the Namespaces thingy in dovecot, but couldn't get it to work. Any suggestions (hyperlinks) are most welcome. Thanks, Hans

2 1

[Dovecot] solaris 10 + dovecot (1)
by aza zel 15 Mar '07

15 Mar '07

hi... i try to make dovecot (v1.0.r26) in solaris 10 and i have the following problem # ./configure --with-ldap ... ... Install prefix ...................... : /usr/local File offsets ........................ : 64bit I/O loop method ..................... : poll File change notification method ..... : none Building with SSL support ........... : yes (OpenSSL) Building with IPv6 support .......... : yes Building with pop3 server ........... : yes Building with mail delivery agent .. : yes Building with GSSAPI support ........ : no Building with user database modules . : static prefetch passwd passwd-file checkpassword ldap (modules) Building with password lookup modules : passwd passwd-file shadow pam checkpassword ldap (modules) Building with SQL drivers ............: # make ... ... Making all in pop3-login Making all in pop3 /bin/bash ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/sfw/include -export-dynamic -o pop3 client.o commands.o mail-storage-callbacks.o main.o ../lib-storage/register/libstorage-register.a ../../src/lib-storage/index/maildir/libstorage_maildir.a ../../src/lib-storage/index/mbox/libstorage_mbox.a ../../src/lib-storage/index/dbox/libstorage_dbox.a ../../src/lib-storage/index/libstorage_index.a ../../src/lib-index/libindex.a ../lib-storage/libstorage.a ../lib-storage/subscription-file/libstorage_subscription_file.a ../lib-imap/libimap.a ../lib-mail/libmail.a ../lib-dict/libdict.a ../lib-charset/libcharset.a ../lib/liblib.a ../lib/mountpoint.o ../lib/str-sanitize.o -export-dynamic -lsocket -lnsl -lrt -lsendfile gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/sfw/include -o pop3 client.o commands.o mail-storage-callbacks.o main.o ../lib/mountpoint.o ../lib/str-sanitize.o ../lib-storage/register/libstorage-register.a../../src/lib-storage/index/maildir/libstorage_maildir.a ../../src/lib-storage/index/mbox/libstorage_mbox.a ../../src/lib-storage/index/dbox/libstorage_dbox.a ../../src/lib-storage/index/libstorage_index.a ../../src/lib-index/libindex.a ../lib-storage/libstorage.a ../lib-storage/subscription-file/libstorage_subscription_file.a ../lib-imap/libimap.a ../lib-mail/libmail.a ../lib-dict/libdict.a ../lib-charset/libcharset.a ../lib/liblib.a -lsocket -lnsl -lrt -lsendfile ld: error de elf: archivo pop3: elf_update: Error de E/S: escritura en salida: No queda espacio de memoria en el dispositivo collect2: ld returned 1 exit status *** Error code 1 make: Fatal error: Command failed for target `pop3' Current working directory /maxi/dovecot-1.0.rc26/src/pop3 *** Error code 1 The following command caused the error: failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='lib lib-dict lib-sql lib-ntlm lib-settings lib-charset lib-mail lib-imap lib-index lib-storage lib-auth auth dict master login-common imap-login imap pop3-login pop3 deliver util plugins'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /maxi/dovecot-1.0.rc26/src *** Error code 1 The following command caused the error: failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='src doc'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /maxi/dovecot-1.0.rc26 *** Error code 1 make: Fatal error: Command failed for target `all' if i do # df -h Sistema de archivos tamaño usados aprovechar capacidad Montado en /dev/dsk/c0d0s0 4,4G 4,3G 57M 99% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab swap 689M 652K 688M 1% /etc/svc/volatile objfs 0K 0K 0K 0% /system/object /usr/lib/libc/libc_hwcap1.so.1 4,4G 4,3G 57M 99% /lib/libc.so.1 fd 0K 0K 0K 0% /dev/fd swap 688M 40K 688M 1% /tmp swap 688M 24K 688M 1% /var/run /dev/dsk/c0d0s7 32G 583M 31G 2% /export/home /export/home/sunone 32G 583M 31G 2% /home/sunone ¿if a dovecot problem with solaris or my configuration of the solaris installation? ¿how i can fix this problem? ¿why this happends? -- Salu2 ;)

4 3

[Dovecot] Newbie index infrastructure and location questions
by Stewart Dean 15 Mar '07

15 Mar '07

I've been lurking for a year or more and am now actually bringing Dovecot up (it seems that any time I make a serious effort at this, something else falls in the pot and I have to give it up yet again). Index questions: I understand the indices should be placed in a non-file-system-quoted place. I have in mind to create /var/dcndx 1) Roughly how much space do indices take up (so I can size space for a directory for them)? I have 4000 users, average mbox inbox size is 5.5MB (totalling 22GB), the number of messages/user mailbox I'd guess to average around 100 and go as high as 5000. They have maybe as much as 3x times space and messages in folders, though I guess the average is about half that of INBOX 2) I'm clear that DC will automagically create the index files, but a) do I have to create a subdirectory for each user, ex: /var/dcndx/user1 b) Is there one index file theat handles a user's mailbox and folders or a separate one for each? -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

2 1

[Dovecot] Newbie NFS question
by Stewart Dean 15 Mar '07

15 Mar '07

As is usually the case, I'm not sure enough of what the DC docs are referring to; there are some implicit info assumptions that I, the Newbie, miss... Anyway, here is my situation Dovecot is to run on one machine only, its index files are stored in on a separate, non-quotaed, not NFS filesystem. INBOX and folder filesystems (all mbox format) are native to this machine and are NFS exported to three machines with root access. NFS access can be NFS V2, or 3 or 4. 1) a user maintenance server that may add or delete users and their INBOXES/folders 2) a mailing list server that writes mailings email to the NFS mounted file system of user INBOXes 3) A user login machine where the users may access their INBOXes and folders All machines are running vanilla IBM AIX; I have never known there to be corruption from NFS locking problems, and am not aware of any locking/caching parameters for AIX's NFS implementation. All machines are running NTP synched to a common NTP master server My questions: 1) Since my index files are stored in on a separate, non-quotaed, not NFS filesystem, can I correctly assume this means I can ignore the nmap_disable and lock_method parms? 2) The docs say: > The easiest way to get better performance without caching problems is > to just make sure the user is always redirected to the same server. If > you can manage to do that, then it's safe to enable attribute caching. The INBOXes and folders live on the mail server where a) DC is going to run and b) they are exported to the three other machine. Does this mean that I don't have to mess with actimeo? 3) Pardon my ignorance....Is actimeo set on the NFS server as an attribute of exportation or on the NFS client on the imported FS...or both 4) Is there any reason related to data integrity or performance to prefer NFS V2 or 3 or 4? 5) Are there other questions I should ask of IBM about NFS client and Server daemon config Thanks in advance........... -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

2 1

[Dovecot] quota - dict - username = '(null)'
by Andreas Jørgensen 15 Mar '07

15 Mar '07

I am trying setting up at virtual domain with quota using postfix and dovecut. But I can't get the quota to work, every time I try sending a mail the following queries is run on the database. SELECT home, uid, gid FROM mail_view_tmp WHERE account = 'dummy' AND domain = 'example.com' SELECT current FROM mail_quota WHERE path = 'quota/storage' AND username = '(null)' BEGIN;INSERT INTO mail_quota (current, path, username) VALUES ('quota/ storage', 262, '(null)') ON DUPLICATE KEY UPDATE current = current + 262;COMMIT The mail is delivered, but the quota for the user is not updated. Instead I just have an other new row for the user (null). I am using the package dovecot-1.0.rc2p3-mysql on OpenBSD 4.0 for macppc My configuration: (posting the full content of alt the config files seemed unnecessary so I cut out the important bits) /etc/postfix/main.cf ... virtual_transport = dovecot /etc/postfix/master.cf : ... dovecot unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/libexec/dovecot/deliver -d $ {recipient} /etc/dovecot.conf .... protocol lda { mail_plugins = quota } .. auth default { user = root passdb sql { args = /etc/dovecot-mysql.conf } userdb static { args = uid=2000 gid=2000 home=/var/vmail/%d/%n/ } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = vmail group = vmail } } } dict { quota = mysql:/etc/dovecot-dict-quota.conf } plugin { quota = dict:storage=10240:messages=1000 proxy::quota } /etc/dovecot-mysql.conf: driver = mysql connect = host=localhost dbname=ingoBase user=dovecot password=dovecot default_pass_scheme = CRYPT password_query = SELECT password FROM mail_view_dovecot WHERE account = '%n' AND domain = '%d' user_query = SELECT home, uid, gid FROM mail_view_tmp WHERE account = '%n' AND domain = '%d' or account = '%u' /etc/dovecot-dict-quota.conf connect = host=localhost dbname=ingoBase user=dovecot password=dovecot table = mail_quota select_field = current where_field = path username_field = username Is there something wrong in my configuration or is this a bug in the version i am using ? Thanks in advance ! Andreas

2 1

[Dovecot] login authentication
by juan carlos 15 Mar '07

15 Mar '07

Hi everyone, i used postfix, dovecot and mysql. I have virtual users and domains. I have this configuration in dovecot-mysql.conf: db_host = localhost db_port = 3306 db_unix_socket = /var/run/mysqld/mysqld.sock db = postfix db_user = postfix db_passwd = bscidth46 db_client_flags = 0 default_pass_scheme = CRYPT password_query = SELECT password FROM mailbox WHERE username = '%u' user_query = SELECT maildir, 105 AS uid, 106 AS gid FROM mailbox WHERE username = '%u' The table mailbox: +-------------------+--------------+------------------+-----------+------------+ | username | home | maildir | quota | domain | +-------------------+--------------+------------------+-----------+------------+ | test(a)domain.com | /home/vmail/ | domain.com/test/ | 10240000 | domain.com | | test2(a)domain.com | /home/vmail/ | domain.com/test2/ | 10240000 | domain.com | | test3(a)domain.com | /home/vmail/ | domain.com/test3/ | 10240000 | domain.com | +-------------------+--------------+-------------------+----------+------------+ I have this configuration in smtpd.conf: pwcheck_method: auxprop mech_list: LOGIN CRAM-MD5 DIGEST-MD5 GSSAPI auxprop_plugin: sql sql_verbose: yes sql_engine: mysql sql_hostnames: localhost sql_database: postfix sql_user: postfix sql_passwd: bscidth46 sql_select: select password from mailbox where username = '%u@%r' What can i do to log in with only user part of user(a)domain.com? Thanks in advance

3 2

Re: [Dovecot] imap-login (proxy) Connection queue full
by Bill Boebel 15 Mar '07

15 Mar '07

On Wed, March 14, 2007 1:57 pm, Timo Sirainen <tss(a)iki.fi> said: > On Thu, 2006-08-10 at 23:15 -0400, Bill Boebel wrote: >> On Thu, August 10, 2006 5:22 pm, Timo Sirainen <tss(a)iki.fi> said: >> >> >> Aug 10 16:23:34 director5 dovecot: imap-login: Disconnected: Connection queue >> >> full: >> >> >> >> I am seeing this logged several times per minute. From netstat, the server >> has >> >> 650 proxied IMAP connections and 450 proxied IMAPS connections, there are >> >> currently 10 imap-login processes running, and using the following config: >> > >> > I did some changes to CVS which hopefully should fix this? >> >> It is still disconnecting with "Connection queue full", although less frequently. >> Testing with about 315 IMAP connections right now and same config as earlier >> today, so it should never hit this condition, right? > > BTW. Does this still happen? No, however I haven't had to touch our Dovecot proxies in several months. They just work. We're still running a copy I pulled from CVS just before 1.0.rc8. We're running the new code only on our backend mail servers. I guess we should update our proxies soon. Bill

1 0

[Dovecot] Courier keywords - anyone even tried?
by Troy Engel 14 Mar '07

14 Mar '07

I do realize from the Wiki that the formats are incompatible, and am looking at the Courier spec (http://www.courier-mta.org/imap/?README.imapkeywords.html) and the Dovecot spec (http://wiki.dovecot.org/MailboxFormat/Maildir) trying to see if there's any sane way I could try and write a shellscript. The pain here is the Courier spec, I think I lost a few brain cells trying to understand this convoluted methodology ("When encountering ".N.file" after another ".N.file" was encountered earlier, remove the file with the lesser N, unless the larger of the two Ns is greater than or equals to T." e.g.) Has anyone even started down this path and has some prototype code written that they gave up on? Is this just so painful trying to migrate that I should just give up? Any ideas welcome... -te -- Troy Engel | Systems Engineer Fluid, Inc | http://www.fluid.com

2 1