August 2007 - dovecot

[Dovecot] Database server failure causes endless loop
by Andy Shellam 09 Aug '07

09 Aug '07

Hi, I've just started setting up Dovecot 1.0.1, and made an error in my configuration, which I think has found a potential problem in Dovecot. I'm using PostgreSQL authentication, and set the database host to "localhost", which PostgreSQL doesn't listen on, so libpq is throwing the standard "is the server running?" message. The problem, however, is Dovecot isn't seeming to understand this, and is endlessly looping, trying to query it every 5 seconds. My client (telnet during testing) is simply sitting there waiting for a response, which it's never going to get. After about 5 minutes, Dovecot killed the connection, saying "* BYE Disconnected for inactivity." If this was from an IMAP client, I'm guessing the client would time-out after so long when it doesn't get a response back. Wouldn't it be more sensible for Dovecot to try PostgreSQL, say, 3 times. If unsuccessful, send the client an "internal server error" or something similar? Otherwise if the database server failed, and the client tries to connect, it'd be waiting for at least a minute (or whatever the standard time-out interval is) before failing, whereas it'd be better to see almost instantly if the server's down. Regards, Andy. Log output: dovecot: Jul 01 11:31:03 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:31:03 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:31:03 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:31:08 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:31:08 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:31:08 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:31:13 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:31:13 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:31:13 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:31:18 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:31:18 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:31:18 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:31:23 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:31:23 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:31:23 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:31:28 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:31:28 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:31:28 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:31:33 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:31:33 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:31:33 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:31:38 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:31:38 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:31:38 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:31:43 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:31:43 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:31:43 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:31:48 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:31:48 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:31:48 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:31:53 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:31:53 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:31:53 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:31:58 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:31:58 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:31:58 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:32:03 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:32:03 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:32:03 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:32:08 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:32:08 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:32:08 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:32:13 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:32:13 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:32:13 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:32:18 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:32:18 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:32:18 Error: auth(default): TCP/IP connections on port 5432? dovecot: Jul 01 11:32:23 Error: auth(default): pgsql: Connect failed to <database>: could not connect to server: Connection refused dovecot: Jul 01 11:32:23 Error: auth(default): Is the server running on host "localhost" and accepting dovecot: Jul 01 11:32:23 Error: auth(default): TCP/IP connections on port 5432?

2 1

[Dovecot] Moving mboxes around
by tomas＠tuxteam.de 09 Aug '07

09 Aug '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dovecot gurus, I have a couple of questions for which I haven't found answers in the docs (which may be well more a limitation of my capabilities than anything else). Here they go: - Is it OK to move mailboxes around from under Dovecot? Case in point: I'm using procmail to pass incoming mail through bogofilter (the standard recipe mentioned in their manpage, which more or less funnels spam into a "spam" mailbox, unsure into an "unsure" and non-spam into "inbox"). From time to time I'd like to clear the spam and unsure mailboxes, using logrotate. Dovecot seems to cope with it. Am I tempting my luck? - Is there a way to tell an external application when mail has been moved by a client? Again: dovecot+bogofilter: from time to time a client checks incoming, unsure and sometimes spam and decides to move --say-- a mail from unsure to spam (deciding it's spam, after all) or similar. This is of course important for the training of bogofilter, so I'd like to trigger a backend action. I see basically two possibilities: - create two more mailboxes, say "spam-indeed" and "ham-indeed". User is told to move mail into these. Ham-indeed gets re-funneled to inbox (or something like that). Manual and error prone. - Use the mail_log plugin (seems more attractive). I still have (distro-provided) dovecot 0.99.14, but this would be a good reason to upgrade. (I still don't see where I get the source mailbox in the mail_log messages from, but that's details now). You get the idea, I think. Anyway, I am interested in any ways to combine dovecot and bogofilter in the backend in a way that I can route user feedback to the filter without putting too much burden on the user. Ideas? Thanks - -- tomás -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFGtuS4Bcgs9XrR2kYRAkiXAJoDJYZC8DYIxFqCw+HEIn0CCNssQwCfaZjh z533XFMH36c4Lemv/+gSn9A= =s87z -----END PGP SIGNATURE-----

2 2

[Dovecot] dotlock file was deleted error
by Joe Wong 09 Aug '07

09 Aug '07

Hello, under what situation the error: dovecot-uidlist.lock was deleted (kept it 0 seconds ) will happen? I saw quite some of these in dovecot log. Thanks, - Joe

4 6

[Dovecot] passdb/userdb restart
by Thomas Hummel 09 Aug '07

09 Aug '07

Hello Timo, I've noticed that when slapd which I'm using as the passdb and the prefetched userdb is restarted I have to restart dovecot. As a matter of fact, if I don't, I get the following error : -- Jul 2 16:38:39 xxxx dovecot: imap-login: Internal login failure: user=<xxxx>, method=PLAIN, rip=xxx.xxx.xxx.xxx, lip=xxx.xxx.xxx.xxx, TLS Jul 2 16:38:46 xxxx dovecot: auth(default): prefetch(xxx,xxx.xxx.xxx.xxx): passdb didn't return userdb entries Jul 2 16:38:46 xxxx dovecot: auth(default): userdb(xxx,xxx.xxx.xxx.xxx): user not found from userdb -- I'm using dovecot-1.0.1 on FreeBSD 6.2-STABLE with openldap-server-2.3.35_1 (bdb backend). Would some cache-related parameters allow to fix that or will restarting dovecot be always mandatory after an ldap restart ? Thanks. -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Pôle informatique - systèmes et réseau

2 1

[Dovecot] 1.1.alpha2 error in logs
by Mike Cisar 09 Aug '07

09 Aug '07

Did a quick-n-dirty install of 1.1.alpha2 on a Fedora Core 6 server... am getting the following message in the maillog, though there seems to be no problem accessing mail. Error seems to be consistent for all users. Running 1.0.3 on the system previously. Aug 8 22:49:26 stage2 dovecot: IMAP(testuser): mkdir(/var/spool/vmail/192.168.0.199/.imap/testuser) failed: Permission denied This is what I'm using for my env in dovecot.conf... default_mail_env = mbox:/vhome/%l/home/%n/mail:INBOX=/var/spool/vmail/%l/%n And here's what we have in the user's mail directory (from before)... /vhome/192.168.0.199/home/testuser/mail/.imap/Deleted Items /vhome/192.168.0.199/home/testuser/mail/.imap/Deleted Items/dovecot.index /vhome/192.168.0.199/home/testuser/mail/.imap/Deleted Items/dovecot.index.cache /vhome/192.168.0.199/home/testuser/mail/.imap/Deleted Items/dovecot.index.log /vhome/192.168.0.199/home/testuser/mail/.imap/INBOX /vhome/192.168.0.199/home/testuser/mail/.imap/INBOX/dovecot.index /vhome/192.168.0.199/home/testuser/mail/.imap/INBOX/dovecot.index.cache /vhome/192.168.0.199/home/testuser/mail/.imap/INBOX/dovecot.index.log /vhome/192.168.0.199/home/testuser/mail/.imap/INBOX/dovecot.index.log.2 /vhome/192.168.0.199/home/testuser/mail/.imap/sent-mail /vhome/192.168.0.199/home/testuser/mail/.imap/sent-mail/dovecot.index /vhome/192.168.0.199/home/testuser/mail/.imap/sent-mail/dovecot.index.cache /vhome/192.168.0.199/home/testuser/mail/.imap/sent-mail/dovecot.index.log I'm assuming that it's trying to create a folder for the user's INBOX index, but it's trying to create it in the mail spool directory rather than in /vhome/192.168.0.199/home/testuser/mail/.imap/INBOX as previously? Thoughts, comments, something I need to modify in my config? Cheers, >>>>> Mike <<<<<

2 2

[Dovecot] lda: vacation auto-reply for a virtual address
by martin f krafft 09 Aug '07

09 Aug '07

Hi, I am using Dovecot to manage a complex virtual mailbox setup. It's all working splendidly, thanks to the Dovecot LDA. This morning, however, I needed to create a vacation-style autoreply for one of the virtual addresses. I made use of cmusieve, authored a little sieve script, and had it working in no time... until I discovered how limited sieve's vacation module is. Most importantly: it's hardcoded to use the Return-Path of a message, but in this very case, I need to actually use the address in the from header. So I had to give up on sieve and am now looking for another solution, but without much success. Given that mail is delivered by the Dovecot LDA, is there any way to make deliver pass it off to e.g. procmail in such a way that $HOME is set to /srv/vmail/domain.org/localpart, so that procmail can find the .procmailrc? Cheers, -- martin; (greetings from the heart of the sun.) \____ echo mailto: !#^."<*>"|tr "<*> mailto:" net@madduck "we are trapped in the belly of this horrible machine, and the machine is bleeding to death." -- godspeed you black emperor! spamtraps: madduck.bogus(a)madduck.net

3 7

[Dovecot] LDAP and (py|cmu)sieve
by Thibault VINCENT 09 Aug '07

09 Aug '07

Hello, Before asking help, i would like thank Timo for this awesome server, it's lite, fast, and has good features. I've read the Wiki, tutorials, and tried various configurations to get the result I expect. My company is running a dovecot 1.0.0 server set up with an LDAP directory, mails are delivered to /var/spool/imap and users do not have a real unix home directory on this system. During my internship, I've installed a sieve server (pysieved) that is working with dovecot. But I encountered a problem with the LDAP setup. Pysieved is using dovecot's auth and client sockets to authenticate the user and get it's home directory where it will store sieve scripts, this home directory is also actually used by cmusieve. With our setup, users do not have /home directories on the mail server but the homeDirectory LDAP attribute is used by other services and cannot be modified for dovecot. I know we have the option to create a new attribute, set it to something like /var/spool/imap/<user> for every mail users, and use this new attribute name in dovecot-ldap.conf with the user_db statement. This is actually working on a test environnement, but we wish we could do it without any modification on the LDAP directory. The very precise question is : How can I tell dovecot to compute the « home » path from the login name when using LDAP userdb ? By example, if a user has login name "jdoe", dovecot will authenticate him against the LDAP directory but won't get the home path from it. Instead, it will use the same mail_location path (if possible) or something similar, like /var/spool/imap/%1u/%u . Can I do this without any modification of the source code of both dovecot and pysieved ? Thank you, -- Thibault VINCENT tibal(a)reloaded.fr thibault.vincent(a)reloaded.fr PGP Key : 0x4BA8A39B

2 1

[Dovecot] HP-UX troubles
by Matthias Luehr 09 Aug '07

09 Aug '07

Hi there, I got dovecot compiled and running on HP-UX 11.23. It's using LDAPUX and PAM for authentication. So far, it works. But after logging in the connection is closed immediately. It looks like this: telnet <ip> 143 Connected to ... Escape character is '^]'. * OK Dovecot ready. a01 login <user> <pass> Connection closed by foreign host. The dovecot log says: Error: imap-login: fd_send(7) failed: Bad file number Error: child 22629 (login) returned error 89 As far as I can see, the problem seems to reside in dovecot's fdpass.c... dovecot version: 1.0.3 gcc version: 2.9 Any ideas or solutions? Thanks in advance, Matthias

2 3

[Dovecot] UIDL match from 0.99.13 to 1.0-1.2
by Daniel Davidson 09 Aug '07

09 Aug '07

I am moving from and old FC2 system to a new RHEL5 system and am having trouble getting the UIDLs to move over right, mainly the UID. I copy over the mailbox, and see the x-uid in the message is what it was on the old server, but when I telnet in to check pop, it rewrites x-uid in the message to something new, causing old messages to get downloaded again, which is not what we want I have tried setting pop3_reuse_xuidl to yes, but that did not change anything, probably because that is the wrong header (I do not have x-uidl, but I do have x-uid). I do have pop3_uidl_format set to %v.%u for compatibility. On the old system the first five are: +OK Logged in. uidl +OK 1 1095087961.3092736 2 1095087961.3092737 3 1095087961.3092738 4 1095087961.3092739 5 1095087961.3092740 On the new system the first five are: +OK Logged in. uidl +OK 1 1095087961.3093018 2 1095087961.3093155 3 1095087961.3093156 4 1095087961.3093157 5 1095087961.3093158 Any help would be appreciated, I do not understand how it is generating the UID portion. Dan

2 6

[Dovecot] Userdb and home directories
by Mike Brudenell 09 Aug '07

09 Aug '07

Greetings - I've just discovered an oddity I didn't know I had... We have two NetApp filers: one serves people's home directories; the other their message store and control files filestores. At the moment the first of the two filers is not accessible to my Dovecot system and I assumed all would be well because, as far as I knew, I wasn't using it at all. However in practice Dovecot DOES appear to be using it: it is trying to chdir() to my home directory when I login, finds it can't at the moment (because of a problem giving "Permission denied"), and closes the connection. I've read the pages on home directories and the userdb on the Wiki and it advises that having a home directory is beneficial. I'm happy to create a subdirectory for this within a user's control files directory, but do NOT want it on our normal filestore: we can't have mail inaccessible because a user's home directory is inaccessible because the other filer is out of action. We use shadow for the passdb and passwd for the userdb (see dovecot - n output below). I'm trying to work out how to override the home directory returned from NIS. Ultimately I'd like to use this template: /mailstore/control/%1Ln/%Ln/home but for the time being while I'm trying to work out how to do it have my own area hard-coded in (as it's only me logging in to the test system): /mailstore/control/p/pmb1/home I'm specifying this with the "args" directive in the userdb section as follows: args = home=/mailstore/control/p/pmb1/home but it isn't being picked up. What am I doing wrong, please? (We want to continue using uids and gids etc from NIS so I don't think using the static userdb is the right thing to do?) Cheers, Mike B-) Output of dovecot -n -------------------- # 1.0.3: /usr/local/dovecot-1.0.3/etc/dovecot.conf log_path: /logfiles/mail/live/dovecot info_log_path: /logfiles/mail/live/dovecot-info disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/local/dovecot-1.0.3/libexec/dovecot/imap-login login_log_format_elements: user=<%Lu> method=%m rip=%r lip=%l %c login_process_per_connection: no login_greeting_capability: yes login_process_size: 64 login_processes_count: 10 max_mail_processes: 10000 mail_location: maildir:/mailstore/messages/%1Ln/%Ln/Maildir:INDEX=/ mailstore/index/%1Ln/%Ln:CONTROL=/mailstore/control/%1Ln/%Ln maildir_copy_with_hardlinks: yes mail_plugins: quota imap_quota mail_log_prefix: [%p]%Us(%Lu): imap_client_workarounds: delay-newmail outlook-idle namespace: type: private separator: / inbox: yes auth default: mechanisms: plain login cache_size: 1024 cache_ttl: 600 username_chars: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890 username_format: %Ln passdb: driver: shadow userdb: driver: passwd args: home=/mailstore/control/p/pmb1/home plugin: quota: fs -- The Computing Service, University of York, Heslington, York Yo10 5DD, UK Tel:+44-1904-433811 FAX:+44-1904-433740 * Unsolicited commercial e-mail is NOT welcome at this e-mail address. *

3 4