September 2007 - dovecot

[Dovecot] Server Timed Out: Outlook Express
by Jackie Hunt 09 Sep '07

09 Sep '07

Hi all, We just started running Dovecot this fall here on campus v 1.0. I've started getting some trouble reports from users. An Outlook Express users reported seeing the "Server has not responded in 60 seconds" messages. Waiting longer doesn't help, he has to stop/start Outlook Express to get connected again. Also have a Thunderbird user who is seeing that type of behavior first thing in the morning after being logged in all night. He has to stop/restart Thunderbird. Also, have had some reports of "disconnected" showing up on the Outlook2007 status bar. I've looked at the Dovecot log, and don't see any errors. I do see lots of "Disconnected", "Disconnected in IDLE" and "Disconnected: Logged Out". These last two seem normal, if I just see "Disconnected" is that a flag that we're losing connections abnormally? I know version 1.0.3 is out. I've looked at the changes, and the only one I can see that might be related to what we are seeing is the IDLE commmand fix. Was hoping for some advice on whether upgrading might resolve these issue. Any insight would be greatly appreciated. Jackie --- Jackie Hunt ACNS Voice: (970) 663-3789 Colorado State University FAX: (970) 491-1958 Fort Collins, CO 80523 Email: jackie.hunt(a)colostate.edu

3 2

[Dovecot] LDA bouncing mails after upgrade -- again
by Milan Holzäpfel 09 Sep '07

09 Sep '07

Hi Timo, some time ago (2007-03-24 and following) I asked whether it was intended that Dovecot deliver bounces mails (by terminating with status 89) if the deliver version is older than the rest of the dovecot installation. You replied that it was a bug, and that it had been fixed in <URL:http://dovecot.org/list/dovecot-cvs/2007-March/008346.html>. When I upgraded from Dovecot 1.0.2 to 1.0.3 a few days ago, I found out that this problem probably still exists: | Aug 28 09:38:03 host.example.org deliver(user(a)example.org): Module is for different version 1.0.3: /usr/lib/dovecot/lda/lib10_quota_plugin.so | Aug 28 09:38:03 host.example.org postfix/pipe[18356]: <ID>: to=<user(a)example.org>, relay=dovecot, delay=0.4, delays=0.13/0.09/0/0.18, dsn=5.3.0, status=bounced (Command died with status 89: "/usr/libexec/dovecot/postfix-deliver/deliver") The error message I posted in march was: | Mar 22 20:29:20 host.example.org deliver(user(a)example.org): Module is for different version 1.0.rc27: /usr/lib/dovecot/lda/lib10_quota_plugin.so | Mar 22 20:29:20 host.example.org postfix/pipe[17344]: <ID>: to=<user(a)example.org>, relay=dovecot, delay=1.9, delays=1.5/0/0/0.35, dsn=5.3.0, status=bounced (Command died with status 89: "/usr/libexec/dovecot/postfix-deliver/deliver") I suppose you still want to fix it. Regards, and thanks for all your work, Milan -- Milan Holzaepfel <mail(a)mjh(d)name> <URL:http://mjh.name/> pub 4096R/C790FC23 EB8E 5E81 81E3 53A9 9B74 B895 5179 54C0 C790 FC23

2 1

[Dovecot] processing Dovecot maildirs with shell scripts
by M. Fioretti 09 Sep '07

09 Sep '07

Hello, I have a postfix server which uses procmail as its delivery agent to deliver incoming messages to several maildirs. For several reasons, not really relevant here, I need to process/refilter/sort again the content of these mailboxes before delivering the messages to the _other_ maildirs which Dovecot sees and serves to local or remote imap users. Basically, I need to write some shell scripts that, from cron jobs, regularly do this: foreach file in some_incoming_mailbox/new/ do #process the file and/or set some variable according to its content delete the file or mv it to some_other_maildir/new/ where the actual action and value of some_other_maildir is set every time by the "process the file" part of the script. The part that I still miss is guidelines to do these things safely, that is without losing or corrupting messages or doing anything else that would confuse dovecot. For example, under which conditions it is sure to move or delete (the Unix way, with mv or rm) a message from mailbox1/new/ to mailbox2/new, when the latter is served via dovecot to remote users? What is advisable and most efficient? Use locks (how?), only work on file which are at least one minute old? Should I move the messages to tmp instead of new? What else? Tips or pointers about this are very welcome. Ciao, Marco

3 5

[Dovecot] How can i complie and install the dict modules
by Oliver Eales 09 Sep '07

09 Sep '07

Hello, I want to migrate from courier-imap to dovecot and now i am trying out dovecot1.1.alpha3 But i have problems getting the expire plugin to work. At startup i get the message: Unknown dict module: db As far as i understood i have to compile the backend manually an copy it into tho appropirate place. But how can i do this ? Thanks in advance, Oliver Eales

2 1

[Dovecot] Today's dovecot-1.1.alpha3 checkins fail to build
by David Favor 09 Sep '07

09 Sep '07

net1#uname -a Linux net1.coolsurf.com 2.6.22.4-65.fc7 #1 SMP \ Tue Aug 21 21:50:50 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux make[5]: Entering directory `/build/work/dovecot-1.1.alpha3/src/lib-storage/index/dbox' gcc -DHAVE_CONFIG_H -I. -I../../../.. -I../../../../src/lib -I../../../../src/lib-mail -I../../../../src/lib-imap -I../../../../src/lib-index -I../../../../src/lib-storage -I../../../../src/lib-storage/index -pipe -O2 -I/common/pkgs/sqlite-3.4.2.1/include -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -I/usr/kerberos/include -MT dbox-file.o -MD -MP -MF .deps/dbox-file.Tpo -c -o dbox-file.o dbox-file.c mv -f .deps/dbox-file.Tpo .deps/dbox-file.Po make[5]: *** No rule to make target `dbox-keywords.o', needed by `libstorage_dbox.a'. Stop. make[5]: Leaving directory `/build/work/dovecot-1.1.alpha3/src/lib-storage/index/dbox' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/build/work/dovecot-1.1.alpha3/src/lib-storage/index' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/build/work/dovecot-1.1.alpha3/src/lib-storage' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/build/work/dovecot-1.1.alpha3/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/build/work/dovecot-1.1.alpha3' make: *** [all] Error 2 exp=0, got ec=2, abort=1 -- Love feeling your best ever, all day, every day? Email join(a)RadicalHealth.com for the easy way.

2 1

[Dovecot] Index and Thunderbird
by Jon 09 Sep '07

09 Sep '07

Hi, Whitbox Linux 3 (RHEL) Dovecot 1.0.rc29 Using NFS From time to time does all mail get re-downloaded to Thunderbird. I would believe this has something to do with an index problem. I upgraded to 1.0 a few months ago but that didn't work well so I installed version 1.0.rc29 which worked better but we still get this problem from time to time. DOes anyone know if it is a good idea to install 1.03 or perhaps 1.1alpha? dovecot: Sep 01 04:47:30 Error: IMAP(XXXXXX): rename(/mail2/home/XXXXXX/.Maildir/.Sent/dovecot-uidlist.lock, /mail2/home/XXXXXX/.Maildir/.Sent/dovecot-uidlist) failed: No such file i dovecot: Sep 01 04:47:30 Error: IMAP(XXXXXX): file_dotlock_replace(/mail2/home/XXXXXX/.Maildir/.Sent/dovecot-uidlist) failed: No such file or directory dovecot: Sep 01 04:47:30 Error: IMAP(XXXXXX): /mail2/home/XXXXXX/.Maildir/.Sent/dovecot-uidlist: next_uid was lowered (19065 -> 19064) dovecot: Sep 01 04:47:30 Error: IMAP(XXXXXX): rename(/mail2/home/XXXXXX/.Maildir/.Sent/dovecot-uidlist.lock, /mail2/home/XXXXXX/.Maildir/.Sent/dovecot-uidlist) failed: No such file dovecot: Sep 01 04:47:30 Error: IMAP(XXXXXX): file_dotlock_replace(/mail2/home/XXXXXX/.Maildir/.Sent/dovecot-uidlist) failed: No such file or directory dovecot: Sep 01 09:11:23 Error: IMAP(XXXXXX): rename(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist.lock, /mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 01 09:11:23 Error: IMAP(XXXXXX): file_dotlock_replace(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 01 09:11:23 Error: IMAP(XXXXXX): /mail2/home/XXXXXX/.Maildir/dovecot-uidlist: next_uid was lowered (18094 -> 18093) dovecot: Sep 01 14:32:25 Error: IMAP(XXXXXX): rename(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist.lock, /mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 01 14:32:25 Error: IMAP(XXXXXX): file_dotlock_replace(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 01 14:32:25 Error: IMAP(XXXXXX): /mail2/home/XXXXXX/.Maildir/dovecot-uidlist: next_uid was lowered (18095 -> 18094) dovecot: Sep 01 17:13:27 Error: IMAP(XXXXXX): rename(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist.lock, /mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 01 17:13:27 Error: IMAP(XXXXXX): file_dotlock_replace(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 01 17:13:27 Error: IMAP(XXXXXX): /mail2/home/XXXXXX/.Maildir/dovecot-uidlist: next_uid was lowered (18096 -> 18095) dovecot: Sep 01 17:31:26 Error: IMAP(XXXXXX): rename(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist.lock, /mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 01 17:31:26 Error: IMAP(XXXXXX): file_dotlock_replace(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 01 17:31:26 Error: IMAP(XXXXXX): /mail2/home/XXXXXX/.Maildir/dovecot-uidlist: next_uid was lowered (18097 -> 18096) dovecot: Sep 01 17:38:28 Error: IMAP(XXXXXX): rename(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist.lock, /mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 01 17:38:28 Error: IMAP(XXXXXX): file_dotlock_replace(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 01 19:05:24 Error: IMAP(XXXXXX): rename(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist.lock, /mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 01 19:05:24 Error: IMAP(XXXXXX): file_dotlock_replace(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 02 09:53:34 Error: IMAP(XXXXXX): rename(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist.lock, /mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 02 09:53:34 Error: IMAP(XXXXXX): file_dotlock_replace(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 02 09:53:35 Error: IMAP(XXXXXX): /mail2/home/XXXXXX/.Maildir/dovecot-uidlist: next_uid was lowered (33015 -> 33014) dovecot: Sep 02 09:54:57 Error: IMAP(XXXXXX): /mail2/home/XXXXXX/.Maildir/dovecot-uidlist: next_uid was lowered (33015 -> 2) dovecot: Sep 02 09:58:49 Error: IMAP(XXXXXX): rename(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist.lock, /mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 02 09:58:49 Error: IMAP(XXXXXX): file_dotlock_replace(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 02 09:58:49 Error: IMAP(XXXXXX): /mail2/home/XXXXXX/.Maildir/dovecot-uidlist: next_uid was lowered (33017 -> 33016) dovecot: Sep 02 09:58:50 Error: IMAP(XXXXXX): rename(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist.lock, /mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 02 09:58:50 Error: IMAP(XXXXXX): file_dotlock_replace(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 03 06:18:40 Error: IMAP(XXXXXX): rename(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist.lock, /mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 03 06:18:40 Error: IMAP(XXXXXX): file_dotlock_replace(/mail2/home/XXXXXX/.Maildir/dovecot-uidlist) failed: No such file or directory dovecot: Sep 03 06:18:40 Error: IMAP(XXXXXX): /mail2/home/XXXXXX/.Maildir/dovecot-uidlist: next_uid was lowered (24248 -> 24247) Best regards - Jon

3 2

[Dovecot] passing quota to deliver via command line
by bill-dovecot＠carpenter.ORG 09 Sep '07

09 Sep '07

Is there any way to pass things like "quota=" for the quota plugin to the deliver LDA via the command line or as an environment variable or whatever? I've got all the info I need in my MTA to avoid a userdb lookup in the LDA, but I still have to do the userdb query to get the per-user quota number (the default quota works fine, of course). -- bill-dovecot(a)carpenter.ORG (WJCarpenter) PGP 0x91865119 38 95 1B 69 C9 C6 3D 25 73 46 32 04 69 D6 ED F3

2 1

[Dovecot] passdb/userdb args
by Daniel L. Miller 09 Sep '07

09 Sep '07

I'm a bit unclear on these - give me a moment to ramble on. I should mention I'm using version 1.0.3, my primary backend is LDAP, and I do NOT want to store user mail folders in my LDAP directory. I currently have the following: default_mail_env = maildir:/var/mail/%d/%n passdb ldap { args = /etc/dovecot/dovecot-ldap.conf } # Instructions for deliver state a userdb is still required if using prefetch userdb ldap { args = /etc/dovecot/dovecot-ldap.conf } userdb prefetch { } My dovecot-ldap.conf is pretty simple - the trimmed version is: hosts = localhost auth_bind = no user_attrs = %d/%n=mail user_filter = (mail=%u) pass_attrs = (&(userPassword=password)(mail=%u)) user_global_uid = 5000 user_global_gid = 8 I recognize that the pass_attrs is incorrect for a prefetch config - but I couldn't get it to work. My mail folder structure is /var/mail/domain/username. If, under 1.0.3, I can't use the %d/%n variables to build the user/home/mail parameters in the LDAP config, can I do it in the configuration stanza? Something like: passdb ldap{ args = home=%dn/%n mail=%d/%n /etc/dovecot/dovecot.conf } -- Daniel

3 4

[Dovecot] Timeout while waiting for lock for transaction log file
by Peter Eriksson 09 Sep '07

09 Sep '07

I have a user that gets client timeout errors when he tries to delete/clean up his massive "Spam" folder (many thousands of mail messages). He uses Thunderbird and has it configured to use "Move to Trash" when he deletes messages. I find the following in Dovecot's log file when it happens: Aug 28 10:38:22 ifm.liu.se dovecot: [ID 107833 mail.error] IMAP(bpn): Timeout while waiting for lock for transaction log file /home/bpn/Maildir/.Trash/dovecot.index.log Aug 28 10:38:24 ifm.liu.se dovecot: [ID 107833 mail.info] IMAP(bpn): Disconnected Any suggestions on what I can tuned/fix in Dovecot to solve this issue? We're using Dovecot 1.0.3 with Maildirs. This is the only user (so far) where we are seeing this. - Peter

2 1

[Dovecot] BUG REPORT - Stops logging after sleep
by Bruce Bodger 09 Sep '07

09 Sep '07

Version: dovecot --version: 1.0.0 OS: OS X - 10.4.9 Architecture: G5 Dual/1.8Ghz Had a fairly normal time correction last night: May 9 20:56:56 G518X2 ntpd[219]: time set -1.212733 s Which dovecot duly noted: May 9 20:56:56 G518X2 dovecot: auth(default): Time just moved backwards by 1 seconds. I'll sleep now until we're back in present. This morning all of the dovecot processes are running fine but dovecot has stopped logging. (I have modified nothing in dovecot.conf relative to logging: dovecot logs to syslog using the "mail" syslog_facility.) ps -aux | grep dovecot root 53 0.0 -0.0 27772 544 ?? Ss 4:23PM 0:04.69 /usr/local/sbin/dovecot -F root 79 0.0 -0.0 28176 556 ?? S 4:23PM 0:03.21 dovecot-auth dovecot 9548 0.0 -0.0 27780 496 ?? S 7:12AM 0:00.05 imap-login dovecot 9631 0.0 -0.0 27780 500 ?? S 7:17AM 0:00.03 imap-login dovecot 9632 0.0 -0.0 27780 500 ?? S 7:17AM 0:00.03 imap-login I am starting dovecot via OS X's launchdaemon facility thus the "-F" command line switch requirement. Sending a "kill -HUP" to the process did not get it to start logging. Sending a "Kill -9" to the process forced a restart and logging began again. ps -aux | grep dovecot root 9738 0.0 -0.0 27772 540 ?? Ss 7:26AM 0:00.03 /usr/local/sbin/dovecot -F root 9739 0.0 -0.0 28176 544 ?? S 7:26AM 0:00.02 dovecot-auth dovecot 9740 0.0 -0.0 27780 500 ?? S 7:26AM 0:00.02 imap-login dovecot 9751 0.0 -0.0 27780 500 ?? S 7:27AM 0:00.01 imap-login dovecot 9762 0.0 -0.0 27780 500 ?? S 7:27AM 0:00.01 imap-login Before posting this bug I compared v1.0.0's /src/lib/ioloop.c to that in the nightly snapshot and saw no adjustments in, what I presumed to be, the relevant portion of the code. Output of "dovecot -n" protocols: imap ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login first_valid_uid: 490 mail_extra_groups: mail mail_location: mbox:~/Library/Mail/IMAP:INBOX=/var/mail/%u:INDEX=%h/ Library/Mail/DOVECOT.indexes dotlock_use_excl: yes auth default: mechanisms: plain login passdb: driver: pam userdb: driver: passwd Thank you.

4 14