September 2007 - dovecot

Re: [Dovecot] plugin problem
by Lars Stavholm 30 Sep '07

30 Sep '07

Let's try to keep this on the list, shall we. Fábio M. Catunda wrote: > Lars Stavholm escreveu: >> Question: >> How can I retrieve the full unix path for a specific mail? >> > I am trying the same thing, but I have a different idea. > > I want that when the user moves a message the transaction is logged into > a file, then I can right external programs that will read this file and > control dspam. Have a look at Johannes Berg's reply above: the Maildir format would have a file for each mail message, other formats would not. > My idea is based on the following: > Q: Scalability: And if a user moves 400 messages to Spam folder at once? > A: Well, its not a problem to write 400 lines into a file, then the > external program will control how much resources dspam can use to > classify all those messages. Sounds OK, not really a problem. > Q: Why not a FIFO: > A: In case of a crash I need to classify all messages anyway, so, a FIFO > is not a good idea here. (I think so) Didn't quite understand the reasoning there, but never mind, it's just me:) > Q: And if the user moves a message from Spam folder to trash folder, > will it be considered innocent? > A: Thats a big problem. When a message is deleted by a MUA its usually > copied from one folder to another and then deleted, but there is no > default trash folder in imap, so, you have to be able to configure a lot > of "possible trash folders" to ignore then, thats why I prefer to have a > external program controlling dspam. I don't see this as a problem at all (why create one when there's none to be found:): * Move message into Spam: it's a spam that should be reclassified. * Move message out of Spam: it's a ham that should be reclassified. Don't really care where the mail comes from or where it is moved. This is the beauty of it all, count the key or mouse clicks, can't be less than this:) * Using the expire plugin, the Spam folder will be emptied auto- matically in due time (typically 30 days maybe) without user intervention. All close to zero maintenance for sysadmin as well as end-user. > Well, by now I dont have much, but I really would like to know how to > find the filename of a message being copied from a folder to another. No such luck (I think): to my understanding (with the help of Johannes in previous reply in this thread), you'd have to create a temporary file with the mail message using tmpnam() + mail_get_stream() or similar, and then do your thing. I'm aiming towards that exact functionality: I want to be able to do training using "pristine" source (so I'll need the whole message), and keep the previous functionality using signatures. We'll see how it goes. Good Luck and thanks for your input /Lars

5 15

[Dovecot] Problem searching with thunderbird
by Jon 30 Sep '07

30 Sep '07

Hi, I'm getting 100s of these errrors when a use the search function in thunderbird. Thunderbird seems to keep searching but shows no restults. Any ideas why? dovecot: Sep 30 14:12:04 Error: IMAP(jon): Trying to allocate 2217042872 bytes dovecot: Sep 30 14:12:04 Error: IMAP(jon): Raw backtrace: imap [0x80b705e] -> imap [0x80b6bab] -> imap [0x80bdbe3] -> imap [0x80b5b65] -> imap(buffer_create_dynamic+0x27) [0x80b5c97] -> imap(t_str_new+0x17) [0x80c2a97] -> imap(message_search_init+0x42) [0x80b2d2e] -> imap [0x808abb4] -> imap [0x808aca7] -> imap [0x80a8c6c] -> imap(mail_search_args_foreach+0x23) [0x80a8cff] -> imap [0x808ae68] -> imap(message_parse_header+0x44) [0x80b15cc] -> imap [0x808b051] -> imap [0x808ba7a] -> imap(index_storage_search_next_nonblock+0x7e) [0x808bc76] -> imap(mailbox_search_next_nonblock+0x17) [0x80a9b7b] -> imap(vfprintf+0x3c68) [0x805c588] -> imap(cmd_search+0x8f) [0x805c78b] -> imap(cmd_uid+0x56) [0x805d59a] -> imap [0x805e39e] -> imap [0x805e2bd] -> imap [0x805e431] -> imap(client_input+0x56) [0x805e4ee] -> imap(io_loop_handler_run+0x100) [0x80bc72c] -> imap(io_loop_run+0x2d) [0x80bbcd1] -> imap(main+0x64) [0x8064d98] -> imap(__libc_start_main+0xa4) [0x420158d4] Settings: # 1.1.beta1: /usr/local/etc/dovecot.conf log_path: /var/log/dovecot.log listen: *:143 ssl_listen: *:993 login_dir: /usr/local/var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login login_processes_count: 2 mail_location: maildir:%h/.Maildir mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes auth default: passdb: driver: pam userdb: driver: passwd Best regards - Jon

2 1

[Dovecot] Configure/install path overrides
by Remy Zandwijk 30 Sep '07

30 Sep '07

Hi, I'm building and installing dovecot on a Solaris 10 machine and therefore I want to install Dovecot in /opt/dovecot. Thus, I start configure with --prefix=/opt/dovecot. I also override things like 'libexecdir', 'docdir', etc. When calling make install, Dovecot is installed in /opt/dovecot, but for example the binary user files are installed in /opt/dovecot/bin/dovecot. The same for the docs, which are installed in /opt/dovecot/share/doc/dovecot. I think that's not quite nice and neat, so I call 'make install' like: make docdir=/opt/dovecot/share/doc install. But even then, the wiki stuff is still installed in /opt/dovecot/share/doc/dovecot/wiki in stead of /opt/dovecot/share/doc/wiki. Very anoying. My point is that ./configure should be able to override all paths, but since some paths are somehow hard-coded in the Makefile, this is impossible. Any chance this will (be) change(d) sometime? -Remy

2 1

[Dovecot] deliver w/quotas - MDN after accept mail?
by Ken A 30 Sep '07

30 Sep '07

I'm testing deliver with sendmail and fs quotas. On an over quota condition, deliver accepts the mail, deletes it, then issues a MDN immediately. Is there a way to get deliver to soft fail like procmail does with a 400 error and queue the mail, then let sendmail handle the MDN, following it's "confTO_QUEUEWARN" and "confTO_QUEUERETURN" ? Thanks, Ken -- Ken Anderson Pacific.Net

3 5

[Dovecot] Auto create folder(s)
by Lars Stavholm 30 Sep '07

30 Sep '07

Hi All, does anyone know of a way to automatically create user folder(s)? Like creating a Spam folder on login if not already there. I've googled a bit but couldn't find anything relevant. Any advice appreciated R /Lars

3 2

[Dovecot] Proxy setup between two servers
by Abhijit Hoskeri 30 Sep '07

30 Sep '07

Hi, I am trying to set up a proxy between two dovecot servers. I have the following set up here. Dovecot version: 1.0.rc15 dovecot -n: # /etc/dovecot/dovecot.conf info_log_path: /var/log/dovecot.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: pop3 imap login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_extra_groups: mail mail_debug: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: verbose: yes debug: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: prefetch In dovecot-ldap.conf: hosts = localhost dn = <dn> dnpass = <dnpass> sasl_bind = no auth_bind = yes ldap_version = 2 base = <ldap-base-dn> pass_attrs = uid=user,userPassword=password,homeDirectory=userdb_home,uidNumber=userdb_uid, gidNumber=userdb_gid,mailQuota=quota,mailHost=proxy If I set the mailHost attribute for a user as "localhost" or "127.0.0.1", I get the following error message in syslog: mail.err: Sep 27 13:01:06 dovecot: auth(default): Master request 5534.1 not found and at the same time, in info_log_path (/var/log/dovecot.log), I get the following messages: Info: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=127.0.0.1 rip=127.0.0.1 resp=<hidden> Info: auth(default): ldap(hoskeri,127.0.0.1): bind search: base=dc=deeproot,dc=co,dc=in filter=(&(objectClass=posixAccount)(uid=hoskeri)) Info: auth(default): ldap(hoskeri,127.0.0.1): result: uid(user)=hoskeri uidNumber(userdb_uid)=1004 homeDirectory(userdb_home)=/home/hoskeri mailHost(proxy)=127.0.0.1 gidNumber(userdb_gid)=1000 Info: auth(default): ldap(hoskeri,127.0.0.1): bind: dn=uid=hoskeri,ou=People,dc=deeproot,dc=co,dc=in Info: auth(default): client out: OK 1 user=hoskeri proxy pass=<hidden> # I notice that in the above line, proxy does not any value associated with it. Can't understand why. Info: auth(default): master in: REQUEST 1 5534 1 Info: auth(default): master out: NOTFOUND 1 Info: imap-login: Internal login failure: user=<hoskeri>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured I have not yet tried to proxy to some other host. Also, I have another question. In the setup I need to do, I need to use the hostname itself for the mailhost, and not IPs, but I understand that it is not implemented and only IP addresses are acceptable. Any major reason why this is so? Could I help implement it? Thanks in advance... -Abhijit

3 3

[Dovecot] Testing sieve filter
by Cliff Meece 28 Sep '07

28 Sep '07

Hi, I am trying to get sieve working with dovecot. Dovecot itself is working fine, and I have the following config: root@master:/var/log# dovecot --version 1.0.rc2 root@master:/var/log# dovecot -n # /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_extra_groups: mail default_mail_env: maildir:/var/mail/%u auth default: passdb: driver: pam userdb: driver: passwd I have this in my lda protocol: mail_plugins = cmusieve And I have created a .dovecot.sieve in both ~ and /var/mail/$user/ that looks like this: require "fileinto"; if exists "X-Spam-Flag" { fileinto "Junk"; } No mail gets moved to the junk folder, nut it does arrive in my inbox with the X-SPAM-Flag: Yes header. How do I troubleshoot this? I don't see anywhere in the logs any errors or any mention whatsoever of filtering activity or failure. I have seen numerous pages on how to set this up, but they invariably focus on setting up virtual users, which I do not need, so it isn't clear which steps I can safely ignore. thanks in advance, Cliff

2 4

Re: [Dovecot] Testing sieve filter
by Cliff Meece 28 Sep '07

28 Sep '07

I'll upgrade if I need to, but that is the most current dpkg for my distribution, and I'd really rather not compile from source if I don't have to. Charles Marcus wrote: > On 9/28/2007, Cliff Meece (cliff(a)cliffandkim.org) wrote: >> I am trying to get sieve working with dovecot. Dovecot itself is >> working fine, and I have the following config: >> >> root@master:/var/log# dovecot --version >> 1.0.rc2 >> root@master:/var/log# dovecot -n > > Stop - upgrade - repeat... > > This is too old to be messing with... >

1 0

[Dovecot] Documentation to create plugins.
by "Fábio M. Catunda" 28 Sep '07

28 Sep '07

hi! Is there any documentation to guide me how to create a dovecot plugin? I'm trying to read the code, but I'm not a good C programmer. I have been able to copy the mail-log plugin into copy-log, edited about 4 lines of code, then I edited Makefiles and configure, now I'm able to compile, install and use my "new" plugin. Anyway, any help is appreciated. Thankz! !DSPAM:46fd34b1153407177711712!

1 0

Re: [Dovecot] v1.0 vs 1.1b re: Postfix and Dovecot LDA
by Jerry Yeager 28 Sep '07

28 Sep '07

>>> From: Bill Cole <dovecot-20061108(a)billmail.scconsult.com> (stuff cut out) > > That looks like a bug. A program that calls setgroups() must be > running as root. It seems to me that a code path leading to such a > call should probably be able to identify that issue before the call > and provide a better failure message than translating EPERM into its > standard meaning.... > > The interesting question would be: why does deliver want to call > setgroups() at all? > > I am not sure why it would need to do this either. It (deliver) is not handing things off to another app to finish things up. <snip><snip> > > I'd love to take credit, but I thought that was about the LDA with > Sendmail, which is rather different, and Rich was running 1.0.3... > > In any event, I won't go so far as to say that running deliver as > setuid root is actively dangerous, but it feels wrong to me and I > wouldn't do it. That may be from too much exposure to bizarre attacks > through delivery agents in the Dark Ages. > > That it works without being setuid on Linux is a touch odd. > > The mystery deepens! I have it (deliver) in a restricted access folder as a standard safety precaution, but as most of these "jails" end up being only safe for a short time I have again gone back to using Postfix as the deliver. Timo has from time to time mentioned that he was thinking that deliver needed to be rewritten. hmmm. I still give you and Rich credit though, if you had not mentioned the ideas behind Sendmail and LDA, it would most likely taken much longer before I read that wiki entry and gave that approach a try, instead of trying to find the missing setting for changing groups that the error message wants fixed. > -- > Bill Cole > bill(a)scconsult.com > > > > ------------------------------ > > Message: 7 > Date: Thu, 27 Sep 2007 17:07:28 -1000 (HST) > From: Julian Cowley <julian(a)lava.net> > Subject: [Dovecot] Dovecot raw backtrace when copying to folder > To: dovecot(a)dovecot.org > Message-ID: <alpine.LRH.0.9999.0709271646190.28814(a)taurus.cesta.com> > Content-Type: TEXT/PLAIN; format=flowed; charset=US-ASCII > > Seeing a problem with a certain user causing dovecot to crash when > copying > mail to a folder. This looks similar to a bug someone on the > mailing list > posted recently. > > Since the backtrace mentions the index, I tried deleting all of the > index > files for the user (including subfolders) but it had no effect. > Seems that > the bug still happens when creating the index for the first time. > > Unfortunately, I can't pin down if there is a particular message > causing > the problem but I'll see if I can track it using strace. > > Lines are broken for clarity. This is dovecot 1.0.5 on CentOS 4.5. > > Sep 27 16:41:42 cookie dovecot: imap-login: Login: user=<user@domain>, > method=PLAIN, rip=::ffff:xx.xx.xx.xx, lip=::ffff:yy.yy.yy.yy, TLS > Sep 27 16:41:53 cookie dovecot: IMAP(user@domain): Trying to > allocate 0 bytes > Sep 27 16:41:53 cookie dovecot: IMAP(user@domain): Raw backtrace: > imap [0x80ad7d4] -> > imap [0x80ad239] -> > imap [0x80b5624] -> > imap(i_malloc+0x1b) [0x80b0e1b] -> > imap [0x8083037] -> > imap [0x80833e6] -> > imap(index_storage_search_init+0xf4) [0x80836f4] -> > imap(cmd_copy+0x145) [0x8056d15] -> > imap(cmd_uid+0x7c) [0x805a74c] -> > imap [0x805b2d5] -> > imap [0x805b25e] -> > imap(_client_input+0x8c) [0x805b43c] -> > imap(io_loop_handler_run+0x169) [0x80b3e09] -> > imap(io_loop_run+0x28) [0x80b3178] -> > imap(main+0x49f) [0x806384f] -> > /lib/tls/libc.so.6(__libc_start_main+0xd3) [0x506de3] -> > imap [0x8055db1] > Sep 27 16:41:53 cookie dovecot: child 26079 (imap) killed with > signal 6 > > > ------------------------------ > > _______________________________________________ > dovecot mailing list > dovecot(a)dovecot.org > http://dovecot.org/cgi-bin/mailman/listinfo/dovecot > > End of dovecot Digest, Vol 53, Issue 77 > ***************************************

1 0