December 2009 - dovecot

[Dovecot] dovecot-shared
by Frank Cusack 30 Dec '09

30 Dec '09

I'm confused about dovecot-shared. If the file exists, \SEEN flags are NOT shared? So if dovecot-shared exists, flags are actually private. The doc seems clear on this (albeit not worded very well). I only question it because intuitively you would think the opposite. If backwards compatibility is the reason for this reverse behavior, the file should have been named dovecot-private-flags. In fact that's a great name to stick a list of flags (one-per-line) that are private. -frnak

2 6

[Dovecot] Issue Authenticating to a new dovecot-postfix installation
by Anthony Nedland 30 Dec '09

30 Dec '09

I have installed dovecot-postfix and postfixadmin on an Ubuntu 9.10 machine. The userdb and passdb are both mysql. If I set up a user in postfixadmin they are able to send. I can successfully telnet into the server remotely by name on 110 and 25. I'm not looking for any authentication encryption/ssl any of that, just POP3/SMTP. When I telnet into 110 I can enter a username with user [username] then when I do pass [password] I get -ERR Authentication failed. I know the user info is correct. When I set up an account in Outlook Express I get "There was a problem logging onto your mail server. Your Password was rejected:" Also saying -ERR Authentication failed.'. (0x800ccc90,0x800ccc92) So basically the same thing. I can attach the tutorial I used in as a .doc if that would help. Anyway, here is my relevant info I think. -- -- -- Version 1.1.11 -------------------------------------------------------------- ---------------------------------------------------------------- ----------------------------------------------------------------- dovecot-sql.conf GREP driver = mysql connect = host=localhost dbname=postfix user=postfix password=password default_pass_scheme = PLAIN user_query = SELECT '/var/vmail/%d/%n' as home, 'maildir:/var/vmail/%d/%n' as mail, 150 AS uis, 8 AS gid, concat(dirsize:storage=',quota) AS quota FROM mailbox WHERE username = '%u' AND active = 1 password_query = SELECT username as user, password, '/var/vmail/%d/%n' as userdb_home,'maildir:/var/vmail/%d/%n' as userdb_mail, 150 as userdb_uid, 8 as userdb_gid FROM mailbox WHERE username = '%u' AND active = 1 -------------------------------------------------------------- ------------------------------------------------------------- ------------------------------------------------------------- root@mail:/etc/dovecot# dovecot -n # 1.1.11: /etc/dovecot/dovecot.conf Error: Error in configuration file /etc/dovecot/dovecot.conf line 1076: Unknown section type (section changed in /etc/dovecot/dovecot.conf at line 1038) Fatal: Invalid configuration in /etc/dovecot/dovecot.conf Starting line 1076---> master { # Master socket provides access to userdb information. It's typically # used to give Dovecot's local delivery agent access to userdb so it # can find mailbox locations. path = /var/run/dovecot/auth-master mode = 0660 # Default user/group is the one who started dovecot-auth (root) user = vmail group = mail } # SQL database <doc/wiki/AuthDatabase.SQL.txt> userdb sql { # Path for SQL configuration file args = /etc/dovecot/dovecot-sql.conf Line 138 --> } I don't understand the issue with these lines. They refer to dovecot.conf though. The config file is clearly dovecot-postfix.conf so I am confused as to why the other matters. I had noticed changes only when I changed dovecot.conf though. (In dovecot -n output) --

1 0

Re: [Dovecot] Retrieve Physical Message Filename
by Tony Rutherford 30 Dec '09

30 Dec '09

Thanks for the reply. I won't be changing any files, or even accessing them, i'll simply be passing the filename along to "another system". I'm not allowed to change this other system or any of its interfaces. The other system has been in place and is "off limits" as far as changes go (I'm told). To make it simple, this other system needs to be notified of any flag changes on emails. So, when we detect a flag change (in our plugin), we need to pass the message filename along to this other system. I hope this makes sense...and again...i'm not justifying the need for it, but I have to play the hand i'm dealt....Tony RutherfordSoftware EngineerBlueTie Inc.arutherford(a)bluetie.com(585) 586-2000 x1040-----Original Message-----From: "Timo Sirainen" [tss(a)iki.fi]Date: 12/29/2009 04:02 PMTo: "Tony Rutherford" CC: dovecot(a)dovecot.orgSubject: Re: [Dovecot] Retrieve Physical Message FilenameOn Tue, 2009-12-29 at 15:50 -0500, Tony Rutherford wrote: > Hi,Using Dovecot 1.2.9 with Maildir and Layout=FS.In a plugin, i'm > overriding "update_flags":void my_mail_update_flags(struct mail > *_mail, enum modify_type modify_type, enum mail_flags flags)For this > email which is having its flags updated, I need to retrieve the > physical filename of the message. I see where > using:mail_get_special(_mail, MAIL_FETCH_UIDL_FILE_NAME, &fname);...I > can retrieve part of the filename, but without the ":2" and the flags > part.Is there a method I can use to get the whole filename (without > having to reassemble it myself). I've looked around, and I'm guessing > it exists, but I don't see it offhand. The problem is that by the time you're trying to access the file, its flags may have already changed, which also means its filename could have changed. So even if you got it, your code would probably randomly fail. What exactly are you going to do with the filename? Maybe you should instead be opening the file with mail_get_stream() and doing something with the fd. This message is intended solely for the individual(s) to whom it is addressed. If you are not the intended recipient, any dissemination or copying is strictly prohibited. If you believe you received this message in error, please notify the sender and delete from your system. Thank you.

3 2

[Dovecot] Using Dovecot deliver with Postfix
by Tobias Lang 30 Dec '09

30 Dec '09

Hello, while installing Dovecot sieve, I am not able to deliver email for root. The strange thing is, that mails to ordinary users get delivered. And no, I do not use virtual mail, just ordinary unix accounts with an entry to passwd / shadow. Also before switching from Postfix deliver to Dovecot deliver, everything worked fine. Current versions for dovecot and postfix are: dovecot-1.2.8 postfix-2.6.5 Anybody an idea, where I misconfigured something? Thanks in advance Tobi dovecot.log (Dovecot daemon) ------------------------------------------------------------------------------------------------------------------------------------- Dec 25 13:15:01 deliver(root): Error: chdir(/root) failed: Permission denied Dec 25 13:15:01 deliver(root): Error: stat(/root/Maildir) failed: Permission denied Dec 25 13:15:01 deliver(root): Error: stat(/root/Maildir/tmp) failed: Permission denied (euid=65534(nobody) egid=65533(nobody) missing +x perm: /root) ------------------------------------------------------------------------------------------------------------------------------------- mail.log (Postfix daemon) ------------------------------------------------------------------------------------------------------------------------------------- Dec 25 13:15:01 h636004 postfix/pickup[9007]: ABD64208163: uid=0 from=<root> Dec 25 13:15:01 h636004 postfix/cleanup[9073]: ABD64208163: message-id=<20091225121501.ABD64208163(a)DOMAIN.net> Dec 25 13:15:01 h636004 postfix/qmgr[9006]: ABD64208163: from=<root(a)DOMAIN.net>, size=629, nrcpt=1 (queue active) Dec 25 13:15:01 h636004 postfix/local[9075]: ABD64208163: to=<tobi(a)DOMAIN.net>, orig_to=<root>, relay=local, delay=0.26, delays=0.14/0.01/0/0.12, dsn=2.0.0, status=sent (delivered to command: /usr/local/libexec/dovecot/deliver) Dec 25 13:15:01 h636004 postfix/local[9075]: ABD64208163: to=<root(a)DOMAIN.net>, orig_to=<root>, relay=local, delay=0.36, delays=0.14/0.01/0/0.21, dsn=4.3.0, status=deferred (temporary failure) ------------------------------------------------------------------------------------------------------------------------------------- Here is an excerpt from my dovecot.conf: dovecot.conf: ------------------------------------------------------------------------------------------------------------------------------------- protocol lda { postmaster_address = postmaster@DOMAIN #mail_plugins = sieve # Disabled to fix deliver issue } mail_location = maildir:%h/Maildir auth default { mechanisms = plain login passdb pam { args = * } userdb passwd { } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } -------------------------------------------------------------------------------------------------------------------------------------

2 2

[Dovecot] 1.2.9 imap crash with backtrace
by Ralf Hildebrandt 30 Dec '09

30 Dec '09

I got about 20 (!) of these today GNU gdb (GDB) 7.0-debian Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/local/libexec/dovecot/imap...done. Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/librt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/librt-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/librt.so.1 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/i686/cmov/libpthread.so.0...Reading symbols from /usr/lib/debug/lib/i686/cmov/libpthread-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libpthread.so.0 Reading symbols from /usr/local/lib/dovecot/imap/lib10_quota_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib10_quota_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib11_imap_quota_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib11_imap_quota_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib11_trash_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib11_trash_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_autocreate_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_autocreate_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_fts_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_fts_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_mail_log_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_mail_log_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_zlib_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_zlib_plugin.so Reading symbols from /usr/lib/libz.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /lib/libbz2.so.1.0...(no debugging symbols found)...done. Loaded symbols for /lib/libbz2.so.1.0 Reading symbols from /usr/local/lib/dovecot/imap/lib21_fts_squat_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib21_fts_squat_plugin.so Reading symbols from /lib/libgcc_s.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libgcc_s.so.1 Core was generated by `imap [ctXXXX 141.42.26.107]'. Program terminated with signal 6, Aborted. #0 0xb78aa424 in __kernel_vsyscall () #0 0xb78aa424 in __kernel_vsyscall () No symbol table info available. #1 0xb77728e0 in *__GI_raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 resultvar = <value optimized out> pid = -1215778828 selftid = 32050 #2 0xb7775e15 in *__GI_abort () at abort.c:88 act = {__sigaction_handler = {sa_handler = 0x9bb5848, sa_sigaction = 0x9bb5848}, sa_mask = {__val = {3214234984, 135196938, 3079186144, 0, 3214235104, 3214235092, 128, 0, 0, 3214235168, 3079439984, 134566866, 515, 0, 0, 0, 1, 135270254, 128, 1, 3214235092, 163272744, 69, 3214235220, 3214235064, 135198534, 163273291, 3214235092, 3214235096, 516, 163272776, 3078652995}}, sa_flags = 516, sa_restorer = 0x8106d79 <write_full+57>} sigs = {__val = {32, 0 <repeats 31 times>}} #3 0x080f15e5 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x9bb5618 "imap [0x80f15d1] -> imap [0x80f1642] -> imap [0x80f0fb9] -> imap [0x8063360] -> imap [0x80635b4] -> imap(cmd_list_full+0x50c) [0x806436c] -> imap(cmd_list+0x19) [0x8064669] -> imap [0x8067a2c] -> imap"... #4 0x080f1642 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x8109dcc "file %s: line %d (%s): assertion failed: (%s)", args=0xbf9556b4 "}\245\020\b\362") at failures.c:443 No locals. #5 0x080f0fb9 in i_panic ( format=0x8109dcc "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #6 0x08063360 in ns_get_listed_prefix (ctx=0x9bbfec8, have_children=true) at cmd-list.c:242 glob = 0x9bb55d0 match = IMAP_MATCH_NO __PRETTY_FUNCTION__ = "ns_get_listed_prefix" #7 list_namespace_send_prefix (ctx=0x9bbfec8, have_children=true) at cmd-list.c:266 i = <value optimized out> flags = <value optimized out> name = 0x9bbf480 "INBOX." str = <value optimized out> ends_with_sep = <value optimized out> #8 0x080635b4 in list_namespace_mailboxes (cmd=0x9bbfe30) at cmd-list.c:375 info = <value optimized out> flags = 1073741828 str = 0x9bb5358 ret = 0 ns = 0xbf9557b8 name = 0x9bc52c0 "INBOX" #9 cmd_list_continue (cmd=0x9bbfe30) at cmd-list.c:762 _data_stack_cur_id = 4 ctx = 0x9bbfec8 #10 0x0806436c in cmd_list_full (cmd=0x9bbfe30, lsub=false) at cmd-list.c:933 client = 0x9bbfba0 args = 0x9bc26d0 arg = <value optimized out> ctx = 0x9bbfec8 patterns = {arr = {buffer = 0x9bbfef0, element_size = 4}, v = 0x9bbfef0, v_modifiable = 0x9bbfef0} pattern = 0x9bc2738 "inbox" #11 0x08064669 in cmd_list (cmd=0x9bbfe30) at cmd-list.c:948 No locals. #12 0x08067a2c in client_command_input (cmd=0x9bbfe30) at client.c:612 client = 0x9bbfba0 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #13 0x08067ad3 in client_command_input (cmd=0x9bbfe30) at client.c:661 client = 0x9bbfba0 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #14 0x08067c2d in client_handle_next_command (client=0x9bbfba0) at client.c:702 No locals. #15 client_handle_input (client=0x9bbfba0) at client.c:714 _data_stack_cur_id = 3 ret = false remove_io = <value optimized out> handled_commands = false __PRETTY_FUNCTION__ = "client_handle_input" #16 0x0806856f in client_input (client=0x9bbfba0) at client.c:753 cmd = <value optimized out> output = 0x9bbfd54 bytes = <value optimized out> __PRETTY_FUNCTION__ = "client_input" #17 0x080fa220 in io_loop_handler_run (ioloop=0x9bbd9b0) at ioloop-epoll.c:208 ctx = 0x9bbdab8 event = 0x9bbdaf8 list = 0x9bbfdd8 io = 0x9bbfdb0 tv = {tv_sec = 1799, tv_usec = 999149} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #18 0x080f9690 in io_loop_run (ioloop=0x9bbd9b0) at ioloop.c:335 No locals. #19 0x08070ef2 in main (argc=) at main.c:327 No locals. $1 = {prev = 0x0, next = 0x0, client = 0x9bbfba0, pool = 0x9bbfe18, tag = 0x9bbfea8 "sr6y", name = 0x9bbfeb0 "LIST", args = 0x9bbfeb8 "\"\" \"inbox\"", cmd_flags = 0, func = 0x8064650 <cmd_list>, context = 0x9bbfec8, module_contexts = {arr = { buffer = 0x9bbfe70, element_size = 4}, v = 0x9bbfe70, v_modifiable = 0x9bbfe70}, parser = 0x9bc2620, state = CLIENT_COMMAND_STATE_WAIT_INPUT, sync = 0x0, uid = 0, cancel = 0, param_error = 0, search_save_result = 0, temp_executed = 0} (gdb) quit ----- End forwarded message ----- -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 2

[Dovecot] Question about log entries
by Cliff Hayes 30 Dec '09

30 Dec '09

Hello, What does this information mean and how is it relevant? I cannot find documentation other than a brief description in dovecot.conf: %t - number of TOP commands %p - number of bytes sent to client as a result of TOP command %r - number of RETR commands %b - number of bytes sent to client as a result of RETR command Thanks in advance, Cliff

4 3

[Dovecot] Mail storage creation fails with virtual users
by Scott H. W. Snyder 30 Dec '09

30 Dec '09

So I have recently set up dovecot with a virtual users dovecot.passdb file, but when I attempt to telnet in, it fails because my virtual users don't have proper permissions to create mailboxes. I don't want to have to create actual users for each email account. Any idea as to what to do? The error that dovecot logs: dovecot: Dec 28 13:06:28 Error: IMAP(user1): mkdir_parents(/var/mail/ folders/user1) failed: Permission denied dovecot: Dec 28 13:06:28 Error: IMAP(user1): Mail storage creation failed with mail_location: mbox:/var/mail/folders/user1/:INBOX=/var/ mail/user1 dovecot: Dec 28 13:06:28 Error: child 27667 (imap) returned error 89 my [test] passdb file: user1:{PLAIN}pass1:2001:2001:User 1 Name:/var/mail/folders/user1:: mail_plugins=cmusieve user2:{PLAIN}pass2:2002:2002:User 2 Name:/var/mail/folders/user2:: mail_plugins=cmusieve user3:{PLAIN}pass3:2003:2003:User 3 Name:/var/mail/folders/user3:: mail_plugins=cmusieve user4:{PLAIN}pass4:2004:2004:User 4 Name:/var/mail/folders/user4:: mail_plugins=cmusieve Conf settings: -bash-3.2# /usr/local/sbin/dovecot -n # 1.0.13: /usr/local/etc/dovecot.conf base_dir: /usr/local/var/run/ log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot.info.log protocols: imap listen: *:143 ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/var/run//login login_executable: /usr/local/libexec/dovecot/imap-login login_greeting: Hi buddy, have an account ? max_mail_processes: 2048 verbose_proctitle: yes first_valid_uid: 1000 last_valid_uid: 5000 mail_location: mbox:/var/mail/folders/%u/:INBOX=/var/mail/%u mail_debug: yes mbox_read_locks: dotlock fcntl auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /usr/local/etc/dovecot.passdb userdb: driver: passwd-file args: /usr/local/etc/dovecot.passdb socket: type: listen master: path: /usr/local/var/run/dovecot-auth-master mode: 432 user: dovecot group: mail

2 5

[Dovecot] Problem with dovecot and PAM
by Joss Red 29 Dec '09

29 Dec '09

Hi, I keep having errors when I try to authenticate to my imap acount, and I can't get my email like this. Here are the logs when i try to authenticate using PLAIN or CRAM-MD5 : PLAIN Dec 24 22:06:25 domain dovecot: auth(default2): client in: AUTH^I1^IPLAIN^Iservice=IMAP^Isecured^Ilip=1.2.3.4^Irip=1.2.3.4^Iresp=<hidden> Dec 24 22:06:27 domain dovecot: auth(default2): pam(email(a)domain.com,1.2.3.4): pam_authenticate() failed: User not known to the underlying authentication module Dec 24 22:06:27 domain dovecot: auth(default2): client out: FAIL^I1^Iuser=email(a)domain.com Dec 24 22:06:27 domain dovecot: imap-login: Disconnected: user=<email(a)domain.com>, method=PLAIN, rip=1.2.3.4, lip=1.2.3.4, TLS CRAM-MD5 Dec 24 22:13:17 domain dovecot: auth(default): client in: AUTH^I1^ICRAM-MD5^Iservice=IMAP^Isecured^Ilip=1.2.3.4^Irip=1.2.3.4 Dec 24 22:13:17 domain dovecot: auth(default): client out: CONT^I1^IPDAxNDgyOTE1OTk5OTE0NTEuMTI2MTY4OTE5N0BzZC0xMjE5Mj4= Dec 24 22:13:17 domain dovecot: auth(default): client in: CONT<hidden> Dec 24 22:13:17 domain dovecot: auth-worker(default): sql(email(a)domain.com,1.2.3.4): query: SELECT email as user, password FROM view_users WHERE email='email(a)domain.com'; Dec 24 22:13:17 domain dovecot: auth-worker(default): password(email(a)domain.com,1.2.3.4): Requested HMAC-MD5 scheme, but we have only PLAIN-MD5 Dec 24 22:13:18 domain dovecot: auth(default): client out: FAIL^I1^Iuser=email(a)domain.com Dec 24 22:13:18 domain dovecot: imap-login: Disconnected: user=<email(a)domain.com>, method=CRAM-MD5, rip=1.2.3.4, lip=1.2.3.4, TLS Please Help me :)

2 1

[Dovecot] Upgrade 1.0->1.2 dbox mysql
by Bradley Giesbrecht 29 Dec '09

29 Dec '09

Hi, I just upgraded to from dovecot v1.1.15 to v1.2.9 so I can use dovecot- sieve. Most everything seems to work but my webmail (roundcube) clients are not seeing their subscribed folders. Reading over the upgrade docs at http://wiki.dovecot.org/Upgrading/1.2 I'm wondering if I have the two settings below configured correctly. dovecot.conf: mail_location = dbox:/opt/local/var/mail/%d/%n/dbox dovecot_mysql.conf user_query homedir result: /opt/local/var/mail/example.com/foo bash-3.2# dovecot -n # 1.2.9: /opt/local/etc/dovecot/dovecot.conf # OS: Darwin 9.8.0 Power Macintosh hfs log_path: /opt/local/var/serveza/log/mail/dovecot.log protocols: imap imaps pop3 pop3s disable_plaintext_auth: no verbose_ssl: yes login_dir: /opt/local/var/run/dovecot/login login_executable(default): /opt/local/libexec/dovecot/imap-login login_executable(imap): /opt/local/libexec/dovecot/imap-login login_executable(pop3): /opt/local/libexec/dovecot/pop3-login login_greeting: now what? mail_location: dbox:/opt/local/var/serveza/mail/%d/%n/dbox mail_debug: yes mail_executable(default): /opt/local/etc/dovecot/bin/log_imap_login.sh mail_executable(imap): /opt/local/etc/dovecot/bin/log_imap_login.sh mail_executable(pop3): /opt/local/etc/dovecot/bin/log_pop3_login.sh mail_plugin_dir(default): /opt/local/lib/dovecot/imap mail_plugin_dir(imap): /opt/local/lib/dovecot/imap mail_plugin_dir(pop3): /opt/local/lib/dovecot/pop3 lda: log_path: /opt/local/var/serveza/log/mail/dovecot-deliver.log auth_socket_path: /opt/local/var/run/dovecot/auth-master postmaster_address: postmaster(a)pixilla.com auth default: mechanisms: plain login cram-md5 ntlm apop verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /opt/local/etc/dovecot/dovecot_mysql.conf userdb: driver: prefetch userdb: driver: sql args: /opt/local/etc/dovecot/dovecot_mysql.conf socket: type: listen client: path: /opt/local/var/spool/postfix/private/auth mode: 432 user: _postfix group: _postfix master: path: /opt/local/var/run/dovecot/auth-master mode: 384 user: _vmail Thanks for any clues, Bradley Giesbrecht

3 3

[Dovecot] Install fails when libdir and libexecdir are the same directory
by River Tarnell 29 Dec '09

29 Dec '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm using Dovecot 1.2.9. I configured it like this: % ./configure --prefix=/opt/rt --libdir=/opt/rt/lib \ --libexecdir=/opt/rt/lib [other args...] It compiled fine, but failed to install, because it tries to install a directory called <libdir>/dovecot/imap, and a file called <libexecdir>/dovecat/imap, which obviously doesn't work when libdir and libexecdir are the same directory: gmake[5]: Entering directory `/home/river/hp-pkg/mail/dovecot/work/dovecot-1.2.9/src/plugins/imap-acl' gmake[5]: Nothing to be done for `install-exec-am'. test -z "/opt/rt/lib/dovecot/imap" || /opt/rt/bin/gmkdir -p "/home/river/hp-pkg/mail/dovecot/install/opt/rt/lib/dovecot/imap" /opt/rt/bin/gmkdir: cannot create directory `/home/river/hp-pkg/mail/dovecot/install/opt/rt/lib/dovecot/imap': File exists gmake[5]: *** [install-imap_moduleLTLIBRARIES] Error 1 As a workaround I used --libexecdir=/opt/rt/lib/dovecot/libexec, but perhaps one of the conflicting files could be moved or renamed. (On System Vish platforms, e.g. Solaris and HP-UX, 'libexec' isn't used -- files that other systems put into 'libexec' go into 'lib'.) - river. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (HP-UX) iEYEARECAAYFAks6OpgACgkQIXd7fCuc5vJ2IACfSXNKUbHi1r0mRWIvfTgl6ATk HMEAn1uAhwdFn+yQMAnAP/RrYx07wlIv =t1pG -----END PGP SIGNATURE-----

2 1