December 2010 - dovecot

[Dovecot] Plugin delete-to-trash on Dovecot 2.0
by Antonio Perez-Aranda 01 Feb '11

01 Feb '11

There are some body using delete-to-trash on any version of Dovecot 2.0? -- Antonio Pérez-Aranda Alcaide aperezaranda(a)yaco.es Yaco Sistemas S.L. http://www.yaco.es/ C/ Rioja 5, 41001 Sevilla Teléfono +34 954 50 00 57 Fax +34 954 50 09 29

4 8

[Dovecot] Telnet access creates new maildir folders
by Seasoul 28 Jan '11

28 Jan '11

Hi, I am running Dovecot Version 1.0.15on a Debian server, with postfix and postfixadmin. My mailbox base is /var/mail/vmail When I send an email to a user1(a)domain.com for the first time, the user "mail" creates a set of dovecot folders under /var/mail/vmail/ user1(a)domain.com/ and my new emails are found in /var/mail/vmail/ user1(a)domain.com/new When I test my server using telnet (telnet domain.com 110), I can log in fine as a user1, but when I type "LIST", it tells me there are no emails. And I realize a new set of dovecot folders were created under /var/mail/vmail/user1/ ! The folders are created by the user "user1". Obviously the folder "new" under that is empty, since my emails received are in /var/mail/vmail/user1(a)domain.com/new and not /var/mail/vmail/user1/new . Therefore, connecting with an email client via POP also shows an empty inbox. I am lost as to what to do to fix this, and how to let the server know that pop access should be looking into /var/mail/vmail/user1(a)domain.com/ instead of /var/mail/vmail/user1/ . Hopefully someone on this list will be able to save me from my misery :) Cheers Sea

7 20

[Dovecot] Feature request - statistics for the COMPRESS imap protocol
by Ed W 21 Jan '11

21 Jan '11

Unless I have failed to read the manual for the second time in two days (?), it doesn't seem to be possible to get COMPRESS statistics at logout time from the IMAP protocol? Assuming not, then can I make a feature request that this might become available in some future version (pretty please?) Can I also just check that the meaning (as of today) of the "imap logout" statistics "%i/%o", presumably they refer to bytes over the wire, ie they are the compressed data sizes? Thanks - Dovecot 2 adds a fantastic bag of new features! Ed W

2 12

[Dovecot] vpopmail disabled services fix
by Calvin 17 Jan '11

17 Jan '11

I noticed that disabling services using vpopmail was not being recognized by dovecot. Using "vmoduser -swip user(a)domain.com" should disable all services, but both pop and imap logins were still allowed. After a bit of digging in the code and confirming with a few debug lines, it appears that lines 38 and 52 of src/auth/passdb-vpopmail.c are the issue (dovecot 2.0.8). These two lines do a strcmp on request->service. It appears that request->service is in lower case, but the comparison values are in upper case. Either updating the values to lowercase or using strcasecmp should fix the issue. Calvin _________________________________________________ Scanned on 27 Dec 2010 23:05:02 This e-mail message is confidential, intended only for the named recipient(s) above and may contain information that is privileged, attorney work product or exempt from disclosure under applicable law. If you have received this message in error, or are not the named recipient(s), please immediately notify the sender at 425-336-0480 and delete the e-mail message from your computer. Thank you.

3 2

[Dovecot] Dovecot - AllowGroups option
by Jacob Neergaard Pedersen 11 Jan '11

11 Jan '11

Hi, I'm trying to control access to different services on an Debian server using /etc/group. So that a user I create for FTP usage doesn't fill up my server with IMAP folders or samba garbage. Services like proftpd have: "AllowGroup ftpgroup" sshd have "AllowGroups sshgroup" And samba have "valid users = @smbgroup" But I can't find the correct option in Dovecot (/etc/dovecot/dovecot.conf) Do anyone have the magic option or a workaround thats doesn't envolve maintaining seperate user databases and password? (I know its needed for samba but besides that) /Neergaard

2 3

[Dovecot] IMAP Clients can not see 3rd tier nested IMAP directories
by jjs87＠cornell.edu 08 Jan '11

08 Jan '11

I have a very bizarre problem that I hope someone can help me with. I am not sure if this is a Dovecot problem, or IMAP client problem. I recently used Transend's Migrator to move mail from Exchange 2007 to my Dovecot 1.0.7 server. The program seems to have moved the nested IMAP dirs properly as seen below in a directory listing of the maildir dir. The nested dirs have indexes, cur, new dirs as expected. However, when the account is viewed in Windows Thunderbird 3.1.6 or Outlook 2010 the 3rd tier dirs are not seen, nor can they be subscribed to. On a whim, I decided to try Apple Mail 4.3 to view the account and all the IMAP dirs can be seen and accessed as expected. Any idea what is going on? Is this somehow an IMAP client problem (bug) or an issue with Dovecot and these clients? Listing of the Maildir dir: [root Maildir]# ls -al total 92 drwx------ 17 andrew andrew 4096 Dec 6 17:06 . drwx------ 9 andrew andrew 4096 Dec 6 15:58 .. drwx------ 5 andrew andrew 4096 Dec 6 16:31 .mailbox drwx------ 5 andrew andrew 4096 Dec 6 16:31 .mailbox.mail drwx------ 5 andrew andrew 4096 Dec 6 16:48 .mailbox.mail.colleagues drwx------ 5 andrew andrew 4096 Dec 6 17:02 .mailbox.mail.colleagues.amy drwx------ 5 andrew andrew 4096 Dec 6 16:48 .mailbox.mail.colleagues.aslan drwx------ 2 andrew andrew 4096 Dec 6 16:31 cur -rw------- 1 andrew andrew 144 Dec 6 16:31 dovecot.index -rw------- 1 andrew andrew 10272 Dec 6 16:31 dovecot.index.cache -rw------- 1 andrew andrew 128 Dec 6 16:31 dovecot.index.log drwx------ 2 andrew andrew 4096 Dec 6 16:31 new drwx------ 5 andrew andrew 4096 Dec 6 16:53 .Sent Items -rw------- 1 andrew andrew 32 Dec 6 17:06 subscriptions drwx------ 2 andrew andrew 4096 Dec 6 16:31 tmp drwx------ 5 andrew andrew 4096 Dec 6 16:32 .Trash PROBLEM: When viewed in Thunderbird 3.1.6 or Outlook 2010: These nested dirs are seen: ..mailbox ....mail These nested dirs are NOT seen or can be subscribed: ......colleagues ........amy ........aslan OBSERVATIONS: When viewed in Apple Mail 4.3, all dirs are seen correctly. Thank you, I appreciate any and all replies, comments, questions, and suggestions. Jason

5 7

[Dovecot] sdbox to mdbox
by Joan Moreau 05 Jan '11

05 Jan '11

Hi all, What is the process to convert "sdbox" installation to a "mdbox" installation ? Thanks Joan

6 18

[Dovecot] namespaces and noselect
by Kyle Wheeler 04 Jan '11

04 Jan '11

Hello, I am trying to use two namespaces to create an "archival" directory that is stored as mboxes (the rest of my tree is all stored as maildirs). However, when I add the second namespace, suddenly Dovecot starts emitting, in response to the LIST command, a second version of the INBOX that is marked as \NoSelect. Here are my namespac definitions... am I doing this wrong? namespace { list = yes hidden = no inbox = yes location = maildir:~/Maildir prefix = separator = / type = private } namespace { hidden = yes # do not list as a separate namespace list = no # inbox = no location = mbox:~/Maildir/Archive:LAYOUT=fs:INDEX=~/Maildir/ArchiveIndexes/ prefix = INBOX/Archive/ separator = / type = private } ~Kyle -- If you are going through hell, keep going. -- Winston Churchill

2 5

[Dovecot] X-SAVEDATE & dync & doveadm expunge
by e-frog 04 Jan '11

04 Jan '11

Hello List, After moving the mail store via dsync backup to a different location the following command doveadm expunge -u user mailbox "Trash" savedbefore 10d deleted ALL mails in Trash instead of messages older than 10 days. It looks like X-SAVEDATE is somehow wrong... A fetch 1:* (internaldate x-savedate) * 1 FETCH (INTERNALDATE "28-Dec-2007 14:49:58 +0100" X-SAVEDATE "01-Jan-1970 01:00:00 +0100") A OK Fetch completed. ...while the ctime for this mail is as below: $ ls -lac -rw------- 1 vmail vmail 40851 2010-12-30 19:26 1198963359.P1256Q0M253583.ubuntu-test.localdomain,S=40851:2,S I was assuming that for the maildirs X-SAVEDATE is derived from the message ctime? "01-Jan-1970 01:00:00 +0100" seem to be definitely wrong. Thanks, e-frog $ doveconf -n # 2.0.8 (89936539e3b8): /etc/dovecot/dovecot.conf # OS: Linux 2.6.35-24-generic-pae i686 Ubuntu 10.10 deliver_log_format = msgid=%m: from=%f: %$ dict { dictionary = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes mail_gid = vmail mail_home = /home/vmail/%Ld/%Ln mail_location = maildir:~/maildir:INDEX=~/index:CONTROL=~/control mail_plugins = quota virtual mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { hidden = no inbox = yes list = yes location = prefix = separator = / subscriptions = yes type = private } namespace { location = virtual:/etc/dovecot/virtual:INDEX=~/control/virtual prefix = virtual/ separator = / subscriptions = no type = private } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { antispam_backend = spool2dir antispam_spam = Junk antispam_spool2dir_notspam = /home/vmail/learn-ham/%%020lu-%u-%%05luh antispam_spool2dir_spam = /home/vmail/learn-spam/%%020lu-%u-%%05lus antispam_trash = Trash fts = squat fts_squat = partial=4 full=10 quota = dict:user::proxy::dictionary sieve = ~/dovecot.sieve sieve_before = /etc/dovecot/sieve-global/ sieve_dir = ~/sieve } postmaster_address = postmaster(a)ubuntu-test.localdomain protocols = imap lmtp sieve quota_full_tempfail = yes service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { mode = 0600 user = vmail } } service dict { unix_listener dict { mode = 0600 user = vmail } } service imap-login { inet_listener imaps { port = 0 } process_min_avail = 2 service_count = 0 } service imap { executable = imap postlogin } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } user = vmail } service postlogin { executable = script-login /opt/bin/dovecot-postlogin.sh } ssl = required ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol lmtp { mail_plugins = quota virtual sieve } protocol imap { mail_plugins = quota virtual fts fts_squat imap_quota antispam }

2 2

[Dovecot] Automatic Debian Dovecot repository now also includes amd64 binary packages.
by Stephan Bosch 04 Jan '11

04 Jan '11

Hi, I've recently significantly improved the automated Dovecot Debian package builder. At the beginning it only produced i386 binaries for Debian testing. A few weeks back I added a slave builder that builds packages for Debian stable. Today I have extended the slave builder with support for multiple architectures and I've added amd64 binaries to the repository. The master builder still builds packages for testing/i386 every hour. The slaves check for new source packages about 20 minutes later. Read the following wiki page for more information and read it carefully when you are considering to use these packages: http://wiki.dovecot.org/PrebuiltBinaries#Automatically_Built_Packages Also, every day at four 'o clock in the morning, the latest source packages are uploaded to the openSUSE build service, which builds i386/amd64 binaries for several Ubuntu versions (experimental): http://download.opensuse.org/repositories/home:/sbosch:/ Regards, Stephan.

2 2