May 2010 - dovecot - dovecot.org

[Dovecot] dovecot 2.0 and lmtp
by Vasiliy G Tolstov 26 May '10

26 May '10

Dovecot now support lmtp, i'm try to tell exim transport to use lmtp driver = lmtp command = /usr/libexec/dovecot/lmtp batch_max = 20 user = 1000 group = 1000 But get error: May 12 13:00:43 selfip exim[13863]: [13863] 1OC7nF-00036i-Ue == vase(a)selfip.ru R=usr_aliases T=usr_aliases defer (-19): Malformed LMTP response after initial connection: Debug: none: root=, index=, control=, inbox= What does it mean? -- Vasiliy G Tolstov <v.tolstov(a)selfip.ru> Selfip.Ru

4 4

[Dovecot] imap quota and pop quota
by gbotero＠emailforall.no-ip.org 25 May '10

25 May '10

hi everyone i have a question i have dovecot 2.0 and postfix with virtual users with mysql all is working fine but when i read mail from outlook or pop and then read the mail from webmail the quota is not the same i mean they calculate wrong and i have to erase the maildirsize file and force to recalculate, what can i do, thanks

1 0

[Dovecot] dovecot2 latest beta5 acl not working properly ?
by Robert Schetterer 25 May '10

25 May '10

Hi i tested acls with some clients horde/imp mulberry thunderbird squirrelmail kmail and i couldnt get it run proberly i have no problems testing setacl etc with plain telnet session, and i have no error in verbose logging but it looks like acl is only working partly with some clients so show acls is working mostly but setting only partly horde/imp and mulberry dont show any acls any idea? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

3 8

[Dovecot] Corrupted index cache file and Maildir filename has wrong W value
by Barry Scott 25 May '10

25 May '10

kmail stopped working and when I check the dovecot log file I see: May 4 11:40:38 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/._NewMail-com/dovecot.index.cache: Corrupted virtual size for uid=234: 633278 != 633251 May 4 11:40:38 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/._NewMail-com/dovecot.index.cache: Corrupted virtual size for uid=234: 633278 != 633251 May 4 12:34:44 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/.Mailing Lists.Xorg Devel 2010-04/dovecot.index.cache: Corrupted virtual size for uid=312: 8884 != 8858 May 4 12:34:44 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/.Mailing Lists.Xorg Devel 2010-04/dovecot.index.cache: Corrupted virtual size for uid=312: 8884 != 8858 ... more of the same... May 4 13:02:54 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/.Mailing Lists.Xorg Users 2010-04/dovecot.index.cache: Corrupted virtual size for uid=38: 30392 != 30366 May 4 13:02:58 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/.Mailing Lists.Xorg Users 2010-04/dovecot.index.cache: Corrupted virtual size for uid=43: 8796 != 8770 May 4 15:25:03 f12barry dovecot: IMAP(bscott): FETCH [] for mailbox _NewMail-com UID 48 got too little data: 3230 vs 3278 May 4 15:25:03 f12barry dovecot: IMAP(bscott): Maildir filename has wrong W value: /home/bscott/Maildir/._NewMail-com/cur/1271683097.M615087P3538.f12barry.office.onelan.co.uk,S=3154,W=3278:2,S May 4 15:25:03 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/._NewMail-com/dovecot.index.cache: Broken virtual size for mail UID 48 May 4 15:25:03 f12barry dovecot: IMAP(bscott): Disconnected: FETCH failed bytes=15437134/33737060 May 4 17:45:41 f12barry dovecot: dovecot: Killed with signal 15 (by pid=7300 uid=0 code=kill) At this point I had only tail'ed the log and seen the issue with UID 48. I then: 1. stopped dovecot 2. deleted the ofending file 3. deleted the dovecot* files 4. started dovecot May 4 17:49:58 f12barry dovecot: Dovecot v1.2.11 starting up (core dumps disabled) May 4 17:52:17 f12barry dovecot: Killed with signal 15 (by pid=7556 uid=0 code=kill) May 4 17:53:21 f12barry dovecot: Dovecot v1.2.11 starting up (core dumps disabled) May 4 17:53:21 f12barry sendmail[2067]: starting daemon (8.14.3): SMTP+queueing@01:00:00 May 4 17:53:21 f12barry sm-msp-queue[2075]: starting daemon (8.14.3): queueing@01:00:00 May 4 17:55:26 f12barry dovecot: imap-login: Login: user=<bscott>, method=PLAIN, rip=::1, lip=::1, secured May 4 17:55:29 f12barry dovecot: IMAP(bscott): FETCH [] for mailbox _NewMail-com UID 48 got too little data: 3878 vs 3920 May 4 17:55:29 f12barry dovecot: IMAP(bscott): Maildir filename has wrong W value: /home/bscott/Maildir/._NewMail-com/cur/1271683097.M733325P3538.f12barry.office.onelan.co.uk,S=3780,W=3920:2,S May 4 17:55:29 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/._NewMail-com/dovecot.index.cache: Broken virtual size for mail UID 48 May 4 17:55:29 f12barry dovecot: IMAP(bscott): Disconnected: FETCH failed bytes=3955/48628 May 4 18:05:55 f12barry dovecot: imap-login: Login: user=<bscott>, method=PLAIN, rip=::1, lip=::1, secured Now another file is being complained about. What would cause these problems? What is the W value and how could I check it? Here is the details of the dovecot I'm using and the kmail version I'm using.ƀ $ sudo dovecot -n # 1.2.11: /etc/dovecot.conf # OS: Linux 2.6.32.11-99.fc12.x86_64 x86_64 Fedora release 12 (Constantine) login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 auth default: passdb: driver: pam userdb: driver: passwd Client is kmail from kdepim-4.4.2-1.fc12.x86_64 Barry

2 4

[Dovecot] Problems with the fs-quota plugin on delivery stage
by Kostik 25 May '10

25 May '10

Hi All! Just noticed a strange behavior of the FS quota plugin on delivery stage. We use group FS quotas via NFS. And quota-tool says: --- Disk quotas for group #5751796 (gid 5751796): Filesystem blocks quota limit grace nfse:/export 1276 10240 10240 --- I run: --- cat ./test.eml | /usr/local/libexec/dovecot/deliver -e -n -d xxxx(a)xxxxx.xxxx --- and get: --- Quota exceeded (mailbox for user is full) --- But ./test.eml is 7088147 bytes and it is not above the quota. dovecot debug log is: --- May 12 20:01:46 dovecot: deliver(xxxx(a)xxxxx.xxxx): fs quota block device = nfse:/export May 12 20:01:46 dovecot: deliver(xxxx(a)xxxxx.xxxx): fs quota mount point = /mount/m5 May 12 20:01:47 dovecot: deliver(xxxx(a)xxxxx.xxxx): quota-fs: host=nfse, path=/export, gid=5751796, bytes May 12 20:01:47 dovecot: deliver(xxxx(a)xxxxx.xxxx): quota-fs: gid=5751796, value=8409088, limit=10485760, active=1 May 12 20:01:47 dovecot: deliver(xxxx(a)xxxxx.xxxx): from=<xxxx(a)xxxxx.xxxx>, msgid=<4BEA4744.1040701@xxxx@xxxxx.xxxx>: save failed to INBOX: Quota exceeded (mailbox for user is full) --- It seems that "value=8409088, limit=10485760" shows that the quota is no problem, but "save failed". If I become that user, then no problems. I can copy ./test.eml without problems. Now quota-tool says: --- Filesystem blocks quota limit grace nfse:/export 8212 10240 10240 --- If I try to copy again(over quota), then honestly get: --- cp: closing `./test2.msg': Disk quota exceeded --- If I switch off quota plugin on dovecot.conf (LDA specific settings), then: - 1. The first delivery is without error, but the INBOX is corrupted(last msg is clipped) but quota-tool show only 3300 blocks used (quota is 10240 blocks). - 2. Following delivery big msgs (over quoted) ends with an error: "Not enough disk space" (this is correct, because the quota is really ended) - 3. Following delivery small msgs (above quoted) ends well, msgs are delivered (used 3304 blocks and etc.) Our setup: -- slackware 11.0, x86_32 -- linux 2.6.31.6 -- dovecot 1.2.11 -- mailbox(not maildir) via NFS storage. Please, tell me where to start looking for the problem? =kostik

2 4

[Dovecot] (1.2.11): Confused about shared/public folders
by Denny Schierz 25 May '10

25 May '10

hi, i red several hours a lot of documentation (wiki, Blogs, lists ...) how to get public folders. Under cyrus it is very easy. Create a mbox on the top with cyradm and some acls. Nothing more ... All i want is: public/info public/group/internal public/foo public/foo/bla on info, everybody can read on group/internal - only group has full access to internal public/foo/bla - read write for everyone The flags (seen, ...) is stored for all. The wiki entries are to old or mixing several things and are not clear, what I should do, to get it working. my config: dovecot.conf mail_location = maildir:/imap/domain/%1n/%n:INDEX=/imap/indexes/domain/% 1n/%n namespace private { separator = / prefix = inbox = yes } #namespace shared { # separator = / # prefix = shared/%%u/ # location = maildir:/imap/shared/domain/%1n/% n:INDEX=mbox:/imap/shared/domain/%1n/%n # subscriptions = no # list = yes #} namespace public { separator = / prefix = public/ location = maildir:/imap/shared/domain subscriptions = no list = yes } mail_uid = vmail mail_gid = vmail mail_privileged_group = vmail protocol imap { login_executable = /usr/local/dovecot/dovecot/libexec/dovecot/imap-login mail_executable = /usr/local/dovecot/dovecot/libexec/dovecot/imap mail_plugin_dir = /usr/local/dovecot/dovecot/lib/dovecot/imap/ mail_plugins = quota imap_quota imap_idle_notify_interval = 120 fsync_disable = yes mail_plugins = quota imap_quota acl imap_client_workarounds = outlook-idle netscape-eoh } plugin { acl = vfile acl_shared_dict = file:/imap/rbg/acl/shared-mailboxes.db acl = vfile:/imap/rbg/acl/dovecot-acls } I wasn't able to use under plugins imap_acl, cause of errors: open(/usr/local/dovecot/dovecot/lib/dovecot/imap//lib02_imap_acl_plugin.so) failed: ld.so.1: imap: fatal: relocation error: file /usr/local/dovecot/dovecot/lib/dovecot/imap//lib02_imap_acl_plugin.so: symbol acl_mailbox_right_lookup: referenced symbol not found Couldn't load required plugins Error: imap dump-capability process returned 89 Fatal: Invalid configuration in /usr/local/dovecot/1.2.11/etc/dovecot.conf System is Solaris10, build by my self with Sieve Patches. After changing to "acl" only, DoveCot starts. So, i can see in Roundcube (webmail) the folder Public (or shared, from the above example) but nothing more. Do i need symlinks, or what I have to do after create the folder + permissions? cu denny

2 1

[Dovecot] Convert Plugin dovecot2.0
by Henrique Fernandes 25 May '10

25 May '10

There is a convert plugin for dovecot2.0 ? I did not find it in src or when i tried to load it! Thanks []'sf.rique

2 3

[Dovecot] quota dict mysql not working (2.0.beta4)
by Michael Kliewe 25 May '10

25 May '10

Hi, I have a problem when setting up the quota dict plugin. I get this error in my logfile when trying to store a draft (APPEND): May 05 14:44:53 imap(test(a)domain.de): Error: net_connect_unix(/usr/ local/var/run/dovecot/dict) failed: Permission denied May 05 14:44:53 imap(test(a)domain.de): Error: Internal quota calculation error The file is there: user@imap01:/$ ls -al /usr/local/var/run/dovecot/ total 20 drwxr-xr-x 4 root root 4096 2010-05-05 14:44 . drwxr-xr-x 3 root root 4096 2010-04-20 18:50 .. srw------- 1 root root 0 2010-05-05 14:44 anvil srw------- 1 root root 0 2010-05-05 14:44 anvil-auth-penalty srw------- 1 root root 0 2010-05-05 14:44 auth-client srw------- 1 root root 0 2010-05-05 14:44 auth-master srw------- 1 root root 0 2010-05-05 14:44 auth-userdb srw------- 1 dovecot root 0 2010-05-05 14:44 auth-worker srw------- 1 root root 0 2010-05-05 14:44 config srw------- 1 root root 0 2010-05-05 14:44 dict srw-rw-rw- 1 root root 0 2010-05-05 14:44 dns-client lrwxrwxrwx 1 root root 35 2010-05-05 14:44 dovecot.conf -> / usr/local/etc/dovecot/dovecot.conf drwxr-xr-x 2 root root 4096 2010-04-20 18:50 empty srw-rw-rw- 1 root root 0 2010-05-05 14:44 lmtp drwxr-x--- 2 root dovecot 4096 2010-05-05 14:44 login -rw------- 1 root root 5 2010-05-05 14:44 master.pid What is going on there, how can I fix this? Michael

3 3

[Dovecot] order of variable modifiers
by Phil Howard 25 May '10

25 May '10

I'd like to have a variable substitute take the domain name part, lower case it, MD5 it, and take a 2-character substring of that. Would that be like %2MLd ? The documentation on the H hash modifier described reversing with R, but expresses it at %3RHu which seems to me like it would be reversing the hash result rather than the user string. I'm undecided about MD5 vs. hash, and could go either way. But I was thinking: mail_location = /data/mail/%2MLd/%Ld/%2MLn/%Ln

2 1

[Dovecot] per domain quota
by alex 25 May '10

25 May '10

Hi I'am using dovecot with quota_rule stored in mysql user table, and quota usage stored in mysql dict ###### Quota ############# dict { quotadict = mysql:/usr/local/etc/dovecot-quota.conf } plugin { quota = dict:user::proxy::quotadict quota_rule2 = Trash:storage=10%% quota_rule3 = Sent:ignore #quota_rule = *:storage=10M } ################################### Everything works as expected, but I have some inconveniences for domains with large number of mailboxes. Allocating and maintain quota to every account it's a hard job. I just want to implement some flexibility for this situations (ex the first enforcement to be the user quota and the second to be the domain quota). Is there a way to implement such thing in dovecot and what are the adjustments that I need to do. Regards Alex

3 2