March 2011 - dovecot - dovecot.org

[Dovecot] Strange Dovecot Issue
by Scott Hughes 20 Mar '11

20 Mar '11

Greetings, I am trying to copy email from one server to another server using Thunderbird. The old server is a closed source ModusMail server and the new server is a Qmail server running Dovecot 1.2.3 (yes, I realize this is behind the times a bit). My issue is this: Whenever Thunderbird gets to a message that has been forwarded (has the forward flag set) an error is generated from the new server (dovecot) that it does not know how to handle the forward flag. Is this a known issue or is it simply that my version of Dovecot is behind? Thanks, Scott

1 0

[Dovecot] Question about "extracting" unwanted e-mails from mdbox
by Maria Arrea 20 Mar '11

20 Mar '11

Imagine the following scenario Last Saturday, 3:00 AM a big phishing attack hits our e-mail inboxes. Spamassassin does not mark them as spam, and our 50.000+ users have in their mdbox a very credible phishing attack. What doveadm-fu could I use to delete (or move to spam) that e-mail from each user INBOX (let´s imagine the Subject or a Header is known)? I repeat: already delivered e-mail, how to filter/prune it. Regards Maria

3 2

[Dovecot] remove old files
by Stéphane Guedon 20 Mar '11

20 Mar '11

Hello I use the dovecot 2.0.10 server and wonder how to clean up correctly the old mails (especially for spam folder). I use maildir storage, and wonder if deleting files with an rm and file command combinaison would be good or would corrupt indexes files/whatever. for exemple, the spam folder is in ~/.mail/.INBOX.spam/ Thus, can I "cd ~/.mail/.INBOX.spam/ && rm 'files older than 2 months' " or something else ? Thanks. -- Stéphane Guedon page web : http://www.22decembre.eu/ carte de visite : http://www.22decembre.eu/downloads/Stephane-Guedon.vcf clé publique gpg : http://www.22decembre.eu/downloads/Stephane-Guedon.asc

2 1

Re: [Dovecot] dovecot proxy, imapproxy, perdition . . . or?
by jkrejci＠usinternet.com 20 Mar '11

20 Mar '11

We use proxy_maybe across several servers handling over 10,000 accounts with no problems. ------Original Message------ From: Dennis Guhl Sender: dovecot-bounces+jkrejci=usinternet.com(a)dovecot.org To: dovecot(a)dovecot.org ReplyTo: dovecot(a)dovecot.org Subject: Re: [Dovecot] dovecot proxy, imapproxy, perdition . . . or? Sent: Mar 19, 2011 4:32 PM On Sat, Mar 19, 2011 at 09:50:15PM +0100, Lorens Kockum wrote: > Hi, > > I have two load-balanced dovecot servers using a single NFS > mount. The version is 1.2.11. I chose this so that if one server [..] > reasons, and also that dovecot has an included proxy, and > that its performance is better than perdition. However on > http://wiki.dovecot.org/HowTo/ImapProxy the feature "IMAP/POP3 > server with proxy feature" is noted as "This model is still a > bit unfinished in current code." > > Is this still true? There's also a general note that "This page > was written quite a long time ago and may not match reality > anymore" . . . I use 1.2.15 from Debian Lennys backports in a proxy configuration for a medium three digit number of users without any problems. Dennis Sent via BlackBerry from T-Mobile

1 0

[Dovecot] Testing sieve
by Jim Knuth 20 Mar '11

20 Mar '11

Hi, I`ve now compiled sieve and have a globalsieverc in /etc/dovecot/sieve/globalsieverc. How can I testing the rules? 1. require "fileinto"; if header :contains "X-Spam-Flag" "YES" { fileinto :create "Spam"; stop; } The second rule not working, the first rule I do not know. 2. require "fileinto"; if header :contains "subject" "Stress" { fileinto "Ablage"; stop; } main.cf entry is mailbox_command = /usr/lib/dovecot/dovecot-lda -a "$RECIPIENT" Thanks in advance -- Mit freundlichen Grüßen, Jim Knuth P.S.: Bitte senden Sie KEINE HTML-Mails! ##### Zufallszitat: Ist das Leben nicht hundert Mal zu kurz, sich in ihm - zu langweilen? [Nietzsche]

1 0

[Dovecot] Sieve or not?
by Jim Knuth 19 Mar '11

19 Mar '11

Hello, I use V 2.11 and my question is: Is one present Sieve with this version or MUST this specially compiles? # 2.0.11 (31d8d43fa6b5): /etc/dovecot/dovecot.conf # OS: Linux 2.6.29.4 i686 Debian wheezy/sid -- Mit freundlichen Grüßen, Jim Knuth P.S.: Bitte senden Sie KEINE HTML-Mails! ##### Zufallszitat: Der Fanatismus ist die einzige 'Willensstärke', zu der auch die Schwachen gebracht werden können. [Nietzsche]

2 3

[Dovecot] Dovecot mirror down?
by Jim Knuth 18 Mar '11

18 Mar '11

Hello, http://xi.rename-it.nl/debian/ down? Does somebody know why? -- Mit freundlichen Grüßen, Jim Knuth P.S.: Bitte senden Sie KEINE HTML-Mails! ##### Zufallszitat: Lache nie über die Dummheit der anderen. Sie kann deine Chance sein. [Churchill]

3 7

Re: [Dovecot] Problem with expire plugin and expunge
by Christoph Pleger 18 Mar '11

18 Mar '11

Hello, > > Big surprise: Something bad must have happened after the messages were > > deleted from Trash; now all messages are zero days old. > > Are you using maildir? Did you run with those patches + mail_debug=yes? Today, the daily cronjob expired some messages. I have attached the output of the job. It seems that the error occurs not when expunging, but when deleting the first message after expunging. Before deleting a message, "doveadm search" showed me messages that were between zero and four days old, but directly after deleting a message, all messages were zero days old. Here is my log entry from when I deleted that message: Mar 18 09:50:28 joseph dovecot: imap(christoph): Debug: expire: Saving first message to Trash, updating timestamp to 1300438228 Regards Christoph

1 0

[Dovecot] Problem with recompiling sieve scripts after migrating to Dovecot 2.0 from 1.2
by Andrés Yacopino 18 Mar '11

18 Mar '11

I saw this in log file of dovecot: Error: sieve: binary save: failed to create temporary file: open(/usr/local/etc/sieve/after/after.dovecot.svbin.acamail.acasalud.com.ar.13528.) failed: Permission denied (euid=40(vmail) egid=41(vmail) missing +w perm: /usr/local/etc/sieve/after, euid is not dir owner) acamail dovecot: lda(xxxxx@xxxxxx): Error: sieve: the lda sieve plugin does not have permission to save global sieve script binaries; global sieve scripts like /usr/local/etc/sieve/after/after.dovecot.sieve need to be pre-compiled using the sievec tool So i tried to recompile script using sievec like: sievec /usr/lcaol/etc/sieve/after/after.dovecot.sieve but i get: sievec(root): Error: user root: Initialization failed: Initializing mail storage from mail_location setting failed: stat(/root/Maildir) failed: Permission denied (euid=40(vmail) egid=41(vmail) missing +x perm: /root, euid is not dir owner) sievec(root): Fatal: Invalid user settings. Refer to server log for more information. What i must do to resolve this? My dovecot configuration is: # 2.0.11: /usr/local/etc/dovecot/dovecot.conf # OS: Linux xxxxxx auth_master_user_separator = * auth_username_format = %Lu disable_plaintext_auth = no first_valid_gid = 40 first_valid_uid = 40 mail_gid = vmail mail_location = maildir:~/Maildir mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = /usr/local/etc/passwd.masterusers driver = passwd-file master = yes } passdb { args = /usr/local/etc/dovecot-ldap.conf driver = ldap } plugin/quota = maildir plugin/quota_rule = *:storage=614400 plugin/quota_rule2 = Trash:storage=+61440 plugin/sieve_after = /usr/local/etc/sieve/after/after.dovecot.sieve plugin/sieve_before = /usr/local/etc/sieve/before/spam.dovecot.sieve protocols = imap pop3 sieve service auth { unix_listener auth-master { group = vmail mode = 0600 user = vmail } user = root } ssl_cert = </usr/local/etc/ssl/certs/dovecot.pem ssl_key = </usr/local/etc/ssl/private/dovecot.pem userdb { args = /usr/local/etc/dovecot-ldap.conf driver = ldap } protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_uidl_format = %08Xu%08Xv } protocol lda { auth_socket_path = /usr/local/var/run/dovecot/auth-master lda_mailbox_autocreate = yes mail_plugins = quota sieve postmaster_address = postmaster@xxxxxx sendmail_path = /usr/lib/sendmail Thanks a lot, -- Andrés Fernando Yacopino

2 1

Re: [Dovecot] dovecot LDA: "temporary failure"
by David Koski 18 Mar '11

18 Mar '11

Forget it. I must have been crosseyed. Someone had put the log file in a non-standard place /home/vmail/dovecot-deliver.log. It told all. A plugin cmusieve was not found, possibly depreciated? I learned how to make the deliver command line work. ;) Sorry, David Koski dkoski(a)sutinen.com > Additional information: > > I created a script to get the return code from deliver: > > 1 #!/bin/bash > 2 > 3 cat "cur/1300037582.P7332Q0M221160.brusco-mail:2,S" | > /usr/lib/dovecot/deliver -f dkoski(a)somedomain.com -d > dkoski(a)domainhidden.com 4 > 5 case $? in > 6 0) echo "0" > 7 ;; > 8 64) echo "64" > 9 ;; > 10 67) echo "67" > 11 ;; > 12 78) echo "78" > 13 ;; > 14 77) echo "77" > 15 ;; > 16 75) echo "75" > 17 ;; > 18 *) echo "unknown" > 19 esac > 20 > > The file it is cat'ing is a valid email in an Maildir/cur file. It returns > 75 (EX_TEMP_FAIL) every time, even run as root. The logs reveal: > > /var/log/dovecot/lda-deliver: > > 2011-03-17 23:35:39 deliver(dkoski(a)somedomain2.com): Info: Loading modules > from directory: /usr/lib/dovecot/modules/lda > > /var/log/dovecot/deliver.info: > (nothing) > > /var/log/dovecot/deliver.err: > (nothing) > > I tried the script on another machine with Dovecot 1.0.15-2.3+lenny1 with > success if I run as root. > > Regards, > David Koski > dkoski(a)sutinen.com > > > This really has me stumped and desperate. I upgraded Debian from 5... > > <snip>

1 0