March 2011 - dovecot - dovecot.org

[Dovecot] Fwd: STARTTLS bug - background story
by Robert Schetterer 07 Mar '11

07 Mar '11

-------- Original-Nachricht -------- Betreff: STARTTLS bug - background story Datum: Mon, 7 Mar 2011 15:08:09 -0500 (EST) Von: Wietse Venema <wietse(a)porcupine.org> An: Postfix users <postfix-users(a)postfix.org> CERT/CC announces a flaw today in multiple STARTTLS implementations. This problem was silently fixed in Postfix 2.8 and 2.9. Updates for Postfix 2.[4-7] are made available via the usual channels. Wietse Plaintext injection in multiple implementations of STARTTLS =========================================================== This is a writeup about a flaw that I found recently, and that existed in multiple implementations of SMTP (Simple Mail Transfer Protocol) over TLS (Transport Layer Security) including my Postfix open source mailserver. I give an overview of the problem and its impact, technical background, how to find out if a server is affected, fixes, and draw lessons about where we can expect similar problems now or in the future. A time line is at the end. On-line information is/will be available at: http://www.kb.cert.org/vuls/id/555316 http://www.postfix.org/CVE-2011-0411.html Problem overview and impact =========================== The TLS protocol encrypts communication and protects it against modification by other parties. This protection exists only if a) software is free of flaws, and b) clients verify the server's TLS certificate, so that there can be no "man in the middle" (servers usually don't verify client certificates). The problem discussed in this writeup is caused by a software flaw. The flaw allows an attacker to inject client commands into an SMTP session during the unprotected plaintext SMTP protocol phase (more on that below), such that the server will execute those commands during the SMTP-over-TLS protocol phase when all communication is supposed to be protected. The injected commands could be used to steal the victim's email or SASL (Simple Authentication and Security Layer) username and password. This is not as big a problem as it may appear to be. The reason is that many SMTP client applications don't verify server TLS certificates. These SMTP clients are always vulnerable to command injection and other attacks. Their TLS sessions are only encrypted but not protected. A similar plaintext injection flaw may exist in the way SMTP clients handle SMTP-over-TLS server responses, but its impact is less interesting than the server-side flaw. SMTP is not the only protocol with a mid-session switch from plaintext to TLS. Other examples are POP3, IMAP, NNTP and FTP. Implementations of these protocols may be affected by the same flaw as discussed here. Technical background: SMTP over TLS =================================== For a precise description of SMTP over TLS, see RFC 3207, on-line at http://www.ietf.org/rfc/rfc3207.txt. SMTP over TLS uses the same TLS protocol that is also used to encrypt traffic between web clients and web servers. But, there is a subtle difference in the way TLS is used, and that makes this flaw possible. SMTP sessions over TLS begin with an SMTP protocol handshake in plaintext. Plaintext means no encryption (thus no privacy), and no protection against modification (no integrity). The plaintext handshake is needed because SMTP has always worked this way. Simply skipping this plaintext phase would seriously break internet email. During the plaintext handshake phase, the SMTP server announces whether it is willing to use TLS. If both SMTP client and server support TLS, the client sends a "STARTTLS" request to turn on TLS. Once TLS is turned on, all further traffic is encrypted and protected from modification. The client and server repeat the entire SMTP protocol handshake, and the client starts sending mail. Demonstration ============= The problem is easy to demonstrate with a one-line change to the OpenSSL s_client command source code (I would prefer scripting, but having to install Perl CPAN modules and all their dependencies is more work than downloading a .tar.gz file from openssl.org, adding eight characters to one line, and doing "./config; make"). (The OpenSSL s_client command can make a connection to servers that support straight TLS, SMTP over TLS, or a handful other protocols over TLS. The demonstration here focuses on SMTP over TLS only.) The demonstration with SMTP over TLS involves a one-line change in the OpenSSL s_client source code (with OpenSSL 1.0.0, at line 1129 of file apps/s_client.c). Old: BIO_printf(sbio,"STARTTLS\r\n"); New: BIO_printf(sbio,"STARTTLS\r\nRSET\r\n"); With this change, the s_client command sends the plaintext STARTTLS command ("let's turn on TLS") immediately followed by an RSET command (a relatively harmless protocol "reset"). Both commands are sent as plaintext in the same TCP/IP packet, and arrive together at the server. The "\r\n" are the carriage-return and newline characters; these are necessary to terminate an SMTP command. When an SMTP server has the plaintext injection flaw, it reads the STARTTLS command first, switches to SMTP-over-TLS mode, and only then the server reads the RSET command. Note, the RSET command was transmitted during the plaintext SMTP phase when there is no protection, but the server reads the command as if it was received over the TLS-protected channel. Thus, when the SMTP server has the flaw, the s_client command output will show two "250" SMTP server responses instead of one. The first "250" response is normal, and is present even when the server is not flawed. The second "250" response is for the RSET command, and indicates that the SMTP server has the plaintext injection flaw. $ apps/openssl s_client -quiet -starttls smtp -connect server:port [some server TLS certificate details omitted] 250 some text here <=== Normal response, also with "good" server. 250 more text here <=== RSET response, only with flawed server. How would an attacker exploit this? It would play man-in-the-middle on the connection between SMTP client and server, perhaps using ARP spoofing at a public WIFI access point. Instead of adding a harmless RSET command, it could steal email or authentication credentials. Anatomy of the flaw =================== The flaw is made possible by two ingredients: I already discussed the switch mid-session from plaintext SMTP to SMTP over TLS. This allows an attacker to piggy-back commands onto the SMTP client's plaintext STARTTLS ("let's turn on TLS") request, such that the server may read those commands after the switch to TLS is completed, as if the commands arrived through the TLS-encrypted session. The second ingredient is a layered software architecture through which those piggy-backed commands bubble up from the network to the application. In the case of SMTP, we have the following major layers before and after the switch to TLS: Before switch to TLS After switch to TLS SMTP protocol engine SMTP protocol engine || || TCP/IP protocol engine TLS protocol engine || || Internet TCP/IP protocol engine || Internet Each layer hides details of what is happening inside. Layering makes it easy to switch from plaintext to TLS, with minimal changes to existing code. To insert the TLS layer between the SMTP engine and the O/S TCP/IP engine, simply adjust the plumbing between the layers, and make all information flow through the TLS layer. It's all about the plumbing =========================== Whether a program may have the plaintext injection flaw depends on how it adjusts the plumbing as it inserts the TLS protocol layer in-between the SMTP protocol layer and the O/S TCP/IP protocol layer. I illustrate this with examples from three open source MTAs: Postfix, Sendmail and Exim. The diagram below zooms in on the plumbing between the SMTP and TLS layers, and shows how different MTAs handle the switch from plaintext to TLS. It is best viewed with a fixed-width font (for example, from the Courier family). Postfix MTA Sendmail MTA Exim MTA before/after before/after before/after switch to TLS switch to TLS switch to TLS SMTP SMTP SMTP SMTP SMTP SMTP <= SMTP layer || || || || || || stream stream stream stream' || || buffers buffers buffers buffers' rw r'w' <= stream layer rw r'w' rw r'w' || || || || || || || || || TLS || TLS || TLS <= TLS layer || || || || || || O/S O/S O/S O/S O/S O/S <= TCP/IP layer As shown in the diagram, both Postfix and Sendmail use an application- level stream abstraction, where each stream has properties such as read/write buffers, read/write functions (indicated with rw), and other properties that are omitted for brevity. When Postfix switches to SMTP over TLS, it replaces the plaintext read/write functions (rw) with the TLS read/write functions (r'w'). Postfix does not modify any of the other stream properties including the read/write buffers. A patch for qmail that introduces TLS support uses the same approach. This approach of replacing only the stream read/write functions, but not the buffers or other stream properties, can introduce the plaintext injection flaw. When Sendmail switches to SMTP over TLS, it replaces the entire stream, along with its read/write buffers and read/write functions. Exim. on the other hand, does not have a stream abstraction like Postfix, Sendmail or qmail. Instead of replacing streams or stream properties, Exim replaces plaintext read/write functions with TLS read/write functions. Because of their program structure, Sendmail and Exim didn't suffer from the plaintext injection flaw. Switching world views ===================== When the switch from plaintext to TLS mode is made, all layers above the TLS layer need to purge all information that they have received through the plaintext session. This "world view switch" needs to be implemented consistently. Otherwise, information that was sent as unprotected plaintext may slip through the cracks. In the case of Postfix and other affected MTAs, this "world view switch" was incomplete. Postfix it did not account for information that lingered in stream buffers at the boundary between two layers. This allowed an attacker to piggy-back commands onto the plaintext "let's turn on TLS" request, such that the commands could be read after the switch to TLS was completed, as if they had arrived through the TLS-encrypted session. Fixing the problem ================== There are two solutions to address the flaw, and both solutions can be used together. - Report an error when unexpected plaintext is received after the STARTTLS command. As documented in RFC 3207, STARTTLS must be the last command in a pipelined group. If plaintext commands are received after STARTTLS, then that is a protocol violation. This measure can also be implemented outside the MTA, for example in a protocol-aware firewall. - If a program uses the same input buffer before and after the switch to TLS, it should discard the contents of the input buffer, just like it discards SMTP protocol information that it received during the plaintext protocol phase. Conclusion ========== This plaintext injection problem is likely to recur when some development moves the plaintext-to-ciphertext switch outside the application: for example, into the kernel, into the local hardware, into a proxy, or into other infrastructure. This encourages applications to use the same application-level streams and buffers and read/write functions before and after the switch to ciphertext. When this migration happens, plaintext injection becomes once more a possibility. Postfix did not reject plaintext commands that were piggy-backed onto the plaintext "let's turn on TLS" request. This reflects what once was the primary mission of Postfix: to deliver mail, not to force other systems to implement all the Internet RFCs correctly. Nowadays, strict protocol compliance is becoming a requirement for senders to get their email delivered. As this episode shows, stricter protocol enforcement by receivers can bring security benefits, besides blocking spambots. Time line ========= Jan 5 2011: While finishing Postfix for its annual release, I found this flaw in the server and client implementations of SMTP over TLS. It had been sitting there for six years ever since TLS support was adopted into Postfix. Not wanting to delay the release schedule, I silently fixed the problem and sent an email to co-developer Victor Duchovni. Jan 6-10 2011: As we investigated the scope of the problem, Victor discovered quickly that many other SMTP over TLS implementations were also affected. Among those affected were email service providers, email anti-spam/virus service providers, anti-spam/virus appliances, as well as other mail server implementations. It was clear that this problem's resolution was going to involve many organizations. Jan 11 2011: Contact CERT/CC to help coordinate with the problem's resolution. Mar 7 2011: Public announcement.

1 0

[Dovecot] POP3 with mdbox
by Patrick Domack 07 Mar '11

07 Mar '11

I converted all my box's over to mdbox, from maildir and ran into this issue, I knew exactly what it was and fixed it, but might want to log a config error or something for others to notice the issue. I was running with pop3_uidl_format = %f, and well, that doesn't work with mdbox very well, and when a user ran a UIDL command, it errored the user out. Simple fix, but would probably be nicer to log a config error when started dovecot instead.

1 0

[Dovecot] dovecot 1.2.3: TB fails to unsubscribe folder after deletion
by Max Dittrich 07 Mar '11

07 Mar '11

Hi, I'm running dovecot 1.2.3 with "imap_client_workarounds = tb-extra-mailbox-sep" and noticed that after deleting a folder (moving to Trash and emptying it on exit) that folder in Trash still keeps subscribed. I think the reason for that behavior is that the call for mailbox_list_set_subscribed() in imap/cmd-subscribe.c (line 84) is fed with the original mailbox name and not the stripped version in verify_name. Assigning verify_name to mailbox in the workaround-conditional fixes this issue for me. I'm not very familiar with C programming but while tracing cmd_subscribe_full() I stumbled upon another thing. In mail_namespace_find_mask() (lib-storage/mail-namespace.c at line 413) mailbox is reassigned with a local string (not t_strduped). I think this might be a problem when mailbox is dereferenced after returning from that function?! .max

3 10

[Dovecot] mdbox command line access howto request
by David Favor 07 Mar '11

07 Mar '11

Currently using Maildir in my config for 1.2.16 going to 2.0.11 and wondering about accessing files outside of dovecot. Many files require access by external programs. For example walking a list of receipt files from merchant processors verifying transaction amounts. This requires each file being read + parsed. With mdbox a file may contain multiple messages. Let me know the best command line tool to break mdbox files into a string of messages. Thanks. -- Love feeling your best ever, all day, every day? Click http://RadicalHealth.com for the easy way!

2 2

Re: [Dovecot] auth on tcp socket?
by Hajo Locke 07 Mar '11

07 Mar '11

Hello, > there are some warnings in log: > "when SASL type is "dovecot", SASL path "inet:localhost:1434" should be a > socket pathname" > ( Datei src/xsasl/xsasl_dovecot_server.c ) file xsasl_dovecot_server.c is in postfix sources but was written by you, Timo Should there also made an update to support auth on tcp-socket without warnings from postfix side? Thanks, Hajo

3 3

[Dovecot] Dovecot, Postfix and Dovecot LDA (LMTP) delivery
by Remy Zandwijk 07 Mar '11

07 Mar '11

Hi list, I am running a Debian Lenny machine with Postfix 2.5.5 and Dovecot 2.0.8. Up until now I ran Postfix with the Procmail delivery agent succesfully. The machine has only local users; I am not using virtual mailboxes. Due to obvious reasons I want to switch to Dovecot LDA delivery, through LMTP. I spend quite some time finding 'the' configuration for both Postfix and Dovecot, but without success. Find my current configuration below. Postfix receives the e-mail, but delivery through LMTP fails, resulting in Postfix sending an NDR. I just cannot figure out what's wrong and I am not sure whether it's a Postfix or Dovecot problem either. Some log output from Postfix: Mar 5 13:25:15 hostname postfix/smtpd[12442]: connect from otherhost.domain.tld[aa.bb.cc.dd] Mar 5 13:25:16 hostname postfix/smtpd[12442]: CC47979071: client=otherhost.domain.tld[aa.bb.cc.dd] Mar 5 13:25:16 hostname postfix/cleanup[12447]: CC47979071: message-id=<Pine.GSO.4.64.1103051324570.5319(a)otherhost.domain.tld> Mar 5 13:25:16 hostname postfix/qmgr[12372]: CC47979071: from=<remy(a)otherhost.domain.tld>, size=1037, nrcpt=1 (queue active) Mar 5 13:25:16 hostname postfix/smtpd[12442]: disconnect from otherhost.domain.tld[aa.bb.cc.dd] Mar 5 13:25:16 hostname postfix/lmtp[12448]: CC47979071: to=<remy(a)hostname.domain.tld>, relay=hostname.domain.tld[private/dovecot-lmtp], delay=1.2, delays=1.2/0.01/0.01/0.05, dsn=5.1.1, status=bounced (host hostname.domain.tld[private/dovecot-lmtp] said: 550 5.1.1 <remy(a)hostname.domain.tld> User doesn't exist: remy(a)hostname.domain.tld (in reply to RCPT TO command)) The only lines that Dovecot logs are: Mar 05 13:25:16 lmtp(12449): Info: Connect from local Mar 05 13:25:16 lmtp(12449): Info: Disconnect from local: Client quit Although LMTP should log to /tmp/dovecot-lmtp.log, the file remains empty. Anyone amongst you who is running the same kind of setup and can help? Thanks, Remy Postfix config (postfix -n output) alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix default_transport = smtp inet_interfaces = all local_transport = lmtp:unix:private/dovecot-lmtp mailbox_command = mailbox_size_limit = 0 message_size_limit = 31457280 mydestination = hostname.domain.tld, localhost.domain.tld, localhost myhostname = hostname.domain.tld mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relay_transport = error relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_client_restrictions = check_client_access hash:/etc/postfix/access, permit_sasl_authenticated, reject_rbl_client zen.spamhaus.org, reject_rbl_client dnsbl.sorbs.net,reject_unauth_pipelining smtpd_helo_required = yes smtpd_helo_restrictions = reject_invalid_helo_hostname,reject_non_fqdn_helo_hostname,reject_unknown_helo_hostname smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_recipient, reject_unauth_destination, reject_unknown_recipient_domain smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_sender_restrictions = check_sender_access hash:/etc/postfix/access, reject_non_fqdn_sender, reject_unknown_sender_domain smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes Dovecot config (dovecot -n output) # 2.0.8: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-amd64 x86_64 Debian 5.0.8 auth_master_user_separator = * listen = * log_path = /var/log/dovecot.log mail_location = maildir:~/.maildir maildir_stat_dirs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { hidden = no inbox = yes list = yes location = prefix = separator = / subscriptions = yes type = private } passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap lmtp service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } verbose_proctitle = yes protocol lmtp { info_log_path = /tmp/dovecot-lmtp-info.log log_path = /tmp/dovecot-lmtp.log } protocol imap { mail_plugins = }

2 3

[Dovecot] Dovecot 2.0 in Active-Standby configuration
by Yaron & Hani Nahum 07 Mar '11

07 Mar '11

Hi, I am planning to use Dovecot 2.0 as a Mail server for a Voicemail system. There is not much traffic so I am not concerend about scaling. However redudancy is an issue. I need to have two Dovecot servers installed on two different farms and setup HA between the two. I would prefer that the HA would be automatically. I have two different storage machines with SAN, and I can setup Layer 2 between the two farms. I am concerned with split brain scenario where the two farms are disconnected and both machines would become active. What cluster configuration would you recommend for such an enviroment?

1 0

[Dovecot] Problems with shared folders with Dovecot 1.2.12
by Pašek Ladislav 07 Mar '11

07 Mar '11

Hello, I'm trying to run shared folders with Dovecot 1.2.12. I'm managing ACLs from SOGo and it seemd that it successfully create dovecot-acl and dovecot-acl-list in user maildir. But I cannot see any of these shared folders. In Thunderbird I could see shared folder in Subscriptions but without option to subscribe. I was reading almost everything that was possible to google but without success. My config: [root@mail etc]# dovecot -n # 1.2.12: /etc/dovecot.conf # OS: Linux 2.6.18-194.32.1.el5 x86_64 CentOS release 5.5 (Final) xfs base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot-deliver.log info_log_path: /var/log/dovecot/dovecot-deliver.log log_timestamp: "%b %d %H:%M:%S protocols: imap imaps managesieve listen(default): *:143 listen(imap): *:143 listen(managesieve): *:2000 ssl_listen(default): *:993 ssl_listen(imap): *:993 ssl_listen(managesieve): ssl_cert_file: /etc/pki/tls/private/mail.valbek.cz.crt ssl_key_file: /etc/pki/tls/private/privkey.key version_ignore: yes login_dir: /var/run/dovecot//login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(managesieve): /usr/libexec/dovecot/managesieve-login login_greeting: Welcome to Dovecot eMail Server. login_log_format: %$: %s %u login_process_size: 128 login_processes_count: 5 login_max_processes_count: 140 mail_max_userip_connections(default): 30 mail_max_userip_connections(imap): 30 mail_max_userip_connections(managesieve): 10 verbose_proctitle: yes first_valid_uid: 306 last_valid_uid: 306 first_valid_gid: 306 last_valid_gid: 306 mail_uid: vmail mail_gid: vmail mail_location: maildir:/mnt/pole/mail/valbek.cz/%u mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(managesieve): /usr/libexec/dovecot/managesieve mail_plugins(default): acl imap_acl mail_plugins(imap): acl imap_acl mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(managesieve): /usr/lib64/dovecot/managesieve imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(managesieve): managesieve_logout_format(default): bytes=%i/%o managesieve_logout_format(imap): bytes=%i/%o managesieve_logout_format(managesieve): bytes ( in=%i : out=%o ) namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: shared separator: / prefix: sdilene/%%u/ location: maildir:/mnt/pole/mail/valbek.cz/%%u:INDEX=/mnt/pole/mail/valbek.cz/%%u/sdilene/%%u list: children lda: postmaster_address: it(a)valbek.cz mail_plugins: sieve acl auth default: mechanisms: plain login passdb: driver: ldap args: /etc/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: mail plugin: autocreate: Spam autocreate2: NoSpam autocreate3: Archiv sieve: /mnt/pole/mail/valbek.cz/%u/.dovecot.sieve sieve_storage: /mnt/pole/mail/valbek.cz/%u/sieve sieve_global_dir: /var/lib/dovecot/sieve/global/ fts: squat fts_squat: partial=4 full=10 acl: vfile acl_shared_dict: file:/var/lib/dovecot/shared-mailboxes.db >From log: "Mar 05 15:25:16imap-login: Info: Login: user=<pasek(a)valbek.cz>, method=PLAIN, rip=192.168.1.221, lip=192.168.1.254 "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: Loading modules from directory: /usr/lib64/dovecot/imap "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: Module loaded: /usr/lib64/dovecot/imap/lib01_acl_plugin.so "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: Module loaded: /usr/lib64/dovecot/imap/lib02_imap_acl_plugin.so "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: Effective uid=306, gid=306, home=(none) "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: Namespace: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: maildir: data=/mnt/pole/mail/valbek.cz/pasek(a)valbek.cz "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: maildir++: root=/mnt/pole/mail/valbek.cz/pasek(a)valbek.cz, index=, control=, inbox=/mnt/pole/mail/valbek.cz/pasek(a)valbek.cz "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: acl: initializing backend with data: vfile "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: acl: acl username = pasek(a)valbek.cz "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: acl: owner = 1 "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: acl vfile: Global ACL directory: (null) "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: Namespace: type=shared, prefix=sdilene/%u/, sep=/, inbox=no, hidden=no, list=children, subscriptions=no "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: shared: root=, index=, control=, inbox= "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: acl vfile: reading file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/dovecot-acl "Mar 05 15:25:16IMAP(pasek@valbek.cz): Info: Namespace : Using permissions from /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz: mode=0700 gid=-1 "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.Trash/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.Trash.TuX/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.Sent/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.Sent.Archiv/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.Sent.Po&AWE-ta &AWA-vejda/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.Spam/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.NoSpam/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: reading file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.Prodex/dovecot-acl "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.dovecot/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: reading file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.Autodesk/dovecot-acl "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.ebay/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.Hesla/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: reading file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.Intranet/dovecot-acl "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.&AX4-ivotopisy/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.Archiv/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.Archiv.RIB-Service/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.Archiv.Po&AWE-ta &AWA-vejda/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.Archiv.Osobn&AO0- po&AWE-ta/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.spr&AOE-va-IT/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.Blbosti/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.V&AWA-B/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: reading file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.SCST/dovecot-acl "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.PPP-R1/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: reading file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.SOGo/dovecot-acl "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.Nexenta/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.openldap/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.INBOX.Pron&AOE-jmy/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.Drafts/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.Archiv/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.Nevy&AX4A4Q-dan&AOE- po&AWE-ta/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.Odstran&ARs-n&AOE- po&AWE-ta/dovecot-acl not found "Mar 05 15:25:19IMAP(pasek@valbek.cz): Info: acl vfile: file /mnt/pole/mail/valbek.cz/pasek(a)valbek.cz/.Odeslan&AOE- po&AWE-ta/dovecot-acl not found Thanks in Advance Ladislav

2 1

[Dovecot] v2.0.11 released
by Timo Sirainen 07 Mar '11

07 Mar '11

http://dovecot.org/releases/2.0/dovecot-2.0.11.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.11.tar.gz.sig Looks like v2.0.10 was a bit troublesome release. I expect this one to last longer. * dotlock_use_excl setting's default was accidentally "no" in all v2.0.x releases, instead of "yes" as in v1.1 and v1.2. Changed it back to "yes". - v2.0.10: LDAP support was broken - v2.0.10: dsyncing to remote often hanged (timed out in 15 mins)

1 0

[Dovecot] OT auto delete attachments with sieve
by Robert Schetterer 07 Mar '11

07 Mar '11

Hi , off topic , but anyone with an idea how to autodelete attachments from mail with sieve, as far i investigated this , it can only be done indirectly perhaps per size etc, but there is no direct auto way, am i right here ? or someone has magic...? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

1 0