August 2011 - dovecot

[Dovecot] BUG(?): Incorrect responses for ACL prohibited actions
by Michael M Slusarz 09 Feb '12

09 Feb '12

In a mailbox that has ACL restrictions on both DELETE and EXPUNGE (i.e. no 'e' or 't' rights), I see the following: 3 UID STORE 3173 (UNCHANGEDSINCE 353) +FLAGS \deleted 3 OK Store completed. (UID 3173 is not flagged \deleted) [...] 6 UID EXPUNGE 1:* 6 OK Expunge completed. (At least 1 UID is flagged \deleted in mailbox) Shouldn't these commands be returning "NO" instead of "OK"? RFC 3501 [6.4.6] for STORE: NO - store error: can't store that data and RFC RFC 3501 [6.4.3] for EXPUNGE: NO - expunge failure: can't expunge (e.g., permission denied) Additionally, RFC 5530 [3] provides the NOPERM response code: NOPERM The access control system (e.g., Access Control List (ACL), see [RFC 4314]) does not permit this user to carry out an operation, such as selecting or creating a mailbox. C: f select "/archive/projects/experiment-iv" S: f NO [NOPERM] Access denied My reading of this is that NOPERM should be returned for ANY ACL prohibited action, not just for selecting or creating a mailbox. Dovecot 2.0.12 does not return NOPERM for DELETE/EXPUNGE actions (at a minimum) that are prohibited. Thoughts? michael

2 3

[Dovecot] [dovecot] Getting duplicates when using snarf plugin with mbox backend
by Jonathan SIegle 09 Feb '12

09 Feb '12

Running dovecot version 2.0.11. To reproduce, open two imap sessions and issue a check command from each at the same time with new mail in the queue. 0 login testuser testpw 1 select inbox -- Deliver mail -- 2 check Thanks, Jonathan

2 1

[Dovecot] compressed mboxes very slow
by kjonca＠o2.pl 28 Jan '12

28 Jan '12

I have some archive mails in gzipped mboxes. I could use them with dovecot 1.x without problems. But recently I have installed dovecot 2.0.12, and they are slow. very slow. Creating index files takes about 10 minutes for ~20M file with 560 messages for bzipped mbox, for gzipped is little better but still unusable :( Stracing dovecot process shows that every ~ 20 messages it rereads complete mbox file. Am I doing something wrong? KJ -- http://modnebzdury.wordpress.com/2009/10/01/niewiarygodny-list-prof-majewsk…

4 13

[Dovecot] Managing public folder ACL files
by Keith Edmunds 14 Nov '11

14 Nov '11

We have a customer with a large public folder hierarchy. They occasionally make requests to have the public folder ACLs changed; for example: "please give user X access to all public folders" (that's nearly 1700 folders). Worse: "please give user Y access to all sales folders" (there are 1450 sales folders). The problem is that there are (naturally) spaces in the folder names, which makes command line manipulation challenging. We've ended up with some astonishingly hacky Python scripts that enter each folder starting with (for example) ".sales" and replacing the dovecot-acl file to try to fulfil the above requests. One day our script are going to get it wrong, or requests will become more complex ("give X access all sales/CustA folders, Y access to all sales/CustB folders, and Z access to all sales folders). There must be a Better Way. How do others manage divergent ACLs within large public folder hierarchies? Thanks, Keith

5 4

[Dovecot] LDAP expired password
by roberto palmarin 10 Nov '11

10 Nov '11

hi all, I'm using postfix, LDAP, dovecot and horde for webmail. user and password information is stored in LDAP. I'm attempting to get password aging working properly and am not having much luck. even if password has expired user can login, can i tell dovecot to control the LDAP field shadowexpired? or is there some other way to check properly that the password is expired before allowing the user log in? thank's /roby

4 5

[Dovecot] dovecot evaluation on a 30 gb mailbox
by Rajesh M 04 Nov '11

04 Nov '11

hi all i use qmail toaster. i recently changed over to dovecot. posting below my evaluation on the same my machine dual core dual xeon 5140 processor, with 4 gb ram, centos linux with qmailtoaster i had setup a qmail tap account which backups up data for a client of mine mailbox size over 30 gb setup dovecot with squirrelmail and logged in it had over one hundred and thirty nine thousand emails 139019 emails in the 30 gb mailbox Reports 1) first login : took 7 minutes to parse 139019 mails but never timed out. this was simply impossible with courier 2) the next login it took 5 seconds by which time the mail numbers increased to 139045 3) next i changed squirrelmail display preference to list 500 mails per page and then clicked on inbox ... expecting dovecot to take atleast around 1-2 mins to show the mails ... the mails were displayed in just 8 seconds .. awesome performance qmailtoaster is simply waiting for a dovecot integration i am evaluating the stability of dovecot now in the next 2-3 weeks i post stability report rajesh

19 43

[Dovecot] Sieve and UserDB/SQL support
by ben＠benweblife.fr 13 Oct '11

13 Oct '11

Hi, I would like to know if plugins of sieve support UserDB/SQL backend. For example, for the vacation plugin, is it possible to retrieve a field like "sieve_vacation_days", "sieve_vacation_reason", and so on.. on user_query? Or, there is a plan for implement this? Thanks ------ dovecot version: 2.0.13

2 1

[Dovecot] sieve vacation reply
by Wojciech Giel 04 Oct '11

04 Oct '11

Hi, I'm configuring postfix with dovecot and roundcube. I'm using flat files as passwdb userdb. Everything works fine except sieve vacation reply. when i send mail from ex. user dennis to tytus I get "discarding vacation response for message implicitly delivered to". What Am i doing wrong? thanks sieve: using sieve path for user's script: /home/tytus/.dovecot.sieve 2011-05-17 16:56:45 deliver(tytus): Info: sieve: opening script /home/tytus/.dovecot.sieve 2011-05-17 16:56:45 deliver(tytus): Info: sieve: executing compiled script /home/tytus/.dovecot.sieve 2011-05-17 16:56:45 deliver(tytus): Info: sieve: msgid=<20110517155641.GA3452(a)badger.example.com>: discarding vacation response for message implicitly delivered to <tytus@badger> /etc/postfix/main.cf ... mailbox_command = /usr/lib/dovecot/deliver -n -m "${EXTENSION}" ... # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.1 log_path: /var/log/dovecot.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps managesieve listen(default): * listen(imap): * listen(managesieve): 127.0.0.1:2000 ssl_ca_file: /etc/postfix/ssl/cacert.pem ssl_cert_file: /etc/postfix/ssl/servercrt.pem ssl_key_file: /etc/postfix/ssl/serverkey.pem ssl_cipher_list: ALL:!LOW:!SSLv2 login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_location: maildir:~/Maildir:INDEX=~/Maildir/indexes mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota autocreate mail_plugins(imap): quota imap_quota autocreate mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve imap_client_workarounds(default): tb-extra-mailbox-sep netscape-eoh delay-newmail outlook-idle imap_client_workarounds(imap): tb-extra-mailbox-sep netscape-eoh delay-newmail outlook-idle imap_client_workarounds(managesieve): lda: postmaster_address: postmaster mail_plugins: sieve quota autocreate quota_full_tempfail: yes deliver_log_format: msgid=%m: %$ rejection_reason: Your message to <%t> was automatically rejected:%n%r log_path: /var/log/sieve.log auth default: mechanisms: plain login cram-md5 verbose: yes debug: yes debug_passwords: yes passdb: driver: pam passdb: driver: passwd-file args: scheme=cram-md5 /etc/dovecot/passwd userdb: driver: passwd-file args: /etc/dovecot/passwd userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/dovecot-auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve autocreate: INBOX autocreate2: Sent autocreate3: Trash autocreate4: Drafts autocreate5: Junk autosubscribe: INBOX autosubscribe2: Sent autosubscribe3: Trash autosubscribe4: Drafts autosubscribe5: Junk quota: maildir:User quota quota_rule: Trash:storage=10M quota_warning: storage=85%% /usr/bin/dovecot-quota-warning.sh 85 quota_warning2: storage=90%% /usr/bin/dovecot-quota-warning.sh 90 quota_warning3: storage=95%% /usr/bin/dovecot-quota-warning.sh 95

5 7

[Dovecot] Dovecot 1.2, problem with SQL quota and mail aliases
by Jacek Osiecki 22 Sep '11

22 Sep '11

Hello, I have a small server running dovecot 1.2 (still not balsy enough to switch to 2.0 - virtual sql accounts, managesieve etc.). There are no local users - only ones defined in the SQL database, and everything else (including quota) is defined in SQL db too. Dovecot is used as IMAP daemon, and dovecot-lda is responsible for delivery (in order to make use of sieve and managesieve). I know that my configuration might be a bit ancient, but this is not referring to any bug (at least I think so) and rather to errors I've made in configuration. Several users have reported, that they are running out of quota even though their mailboxes are empty. I thought these were some single cases, but recently I discovered that this situation occurs when: - user john(a)domain.com has a mail alias, eg. john.smith(a)domain.com - he logs in to the imap account (using MUA or webmail) using his alias (john.smith(a)domain.com) In effect, all incoming emails for john(a)domain.com are increasing the counters (both "bytes" and "messages"), but since user logs in using john.smith(a)domain.com - anything he deletes from the mailbox decreases the records for john.smith(a)domain.com. Finally, John has two records: +---------------------------+-----------+----------+ | username | bytes | messages | +---------------------------+-----------+----------+ | john.smith(a)domain.com | -5488133 | -13 | | john(a)domain.com | 341411029 | 1111 | +---------------------------+-----------+----------+ The record for john(a)domain.com finaly reaches the quota limit - and even removing all emails does not help. My /etc/dovecot/dovecot-dict-quota.conf looks like this: map { pattern = priv/quota/storage table = quota username_field = username value_field = bytes } map { pattern = priv/quota/messages table = quota username_field = username value_field = messages } And my question is: what is used as "username"? Always the username given wher user logs in? Is there a way to provide some dictionary to translate all aliases to the real username? Best regards, -- Jacek Osiecki joshua(a)ceti.pl GG:3828944 I don't want something I need. I want something I want.

3 4

[Dovecot] signal 11 crash, sometimes, during mbox bz2 decompression
by Mike Brown 12 Sep '11

12 Sep '11

Hello again, I'm running dovecot 1.2.16 from the ports collection on FreeBSD 8.1-STABLE, amd64. To enable IMAP read-only access to gzip or bzip2 compressed mbox files, I added the following to my dovecot.conf, in the protocol imap { ... } section: mail_plugins = zlib My compressed mbox files are all .bz2 files in an 'old' subdirectory of my main mail directory. I am trying to access them with Thunderbird. I 'subscribed' to them just fine, and at first I thought it was working, but I just got lucky on the first couple I accessed. Dovecot actually fails to decompress them about 90% of the time, seemingly at random; the same box will not work a bunch of times, then work once, then not work again and again. When it works, sometimes only some of the messages get transmitted. Most of the failures are accompanied by this pair of messages in my log: Aug 16 00:25:33 myhost dovecot: dovecot: child 943 (imap) killed with signal 11 (core not dumped - set mail_drop_priv_before_exec=yes) Aug 16 00:25:33 myhost kernel: pid 943 (imap), uid 1001: exited on signal 11 Some of the failures have only the "exited on signal 11" message. The very first failure had this: Aug 16 00:22:47 myhost dovecot: IMAP(mike): Next message unexpectedly lost from mbox file (read-only mbox stream) at 2761 (cached) Aug 16 00:22:47 myhost dovecot: IMAP(mike): read(mail, uid=2) failed: Invalid argument Is this a problem with dovecot? Let me know if/how I can help, or what other info you need. Thanks, Mike

2 4