November 2012 - dovecot

[Dovecot] fs_flush_file_handle_cache_dir: rmdir(/var/mail) AGAIN
by Ken Mandelberg 27 Nov '12

27 Nov '12

We are running Dovecot 2.0.12. It runs on only one server and /var/mail is local where all the INBOX's are stored. Users other IMAP folders are NFS mounted on the server. We see frequent Error: nfs_flush_file_handle_cache_dir: rmdir(/var/mail) failed: Device busy I know this error message has been around a long time. Should we still be seeing it on 2.0.12 with a local /var/mail. Perhaps the message is misleading and really complaining about folders other than INBOX that are NFS mounted. Our config has dovecot.conf:mail_nfs_index = no dovecot.conf:mail_nfs_storage = yes is that correct given the above? Also, does the flush error messages have any real consequences? My understanding is that the rmdir is meant to fail, just to force a flush.

2 1

[Dovecot] Filesystem quotas
by Andreas Kasenides 27 Nov '12

27 Nov '12

I could not determine if when using filesystem quotas (http://wiki2.dovecot.org/Quota/FS) Dovecot will use the reported quota and limits without the need of configuring them via "quota_rules". Is this possible somehow? Such a feature would determine the quota limits automatically from the filesystem quotas thereby allowing to make use of them in quota warnings. Dovecot already knows the quota settings and limits. Here is evidence from the logs > Nov 21 19:24:22 iolaos dovecot: imap(user): Debug: box=/Mail/ank > mount=/newmail match=yes > Nov 21 19:24:22 iolaos dovecot: imap(user): Debug: quota-fs: > host=xxxx.xxxx.ucy.xx.cy, path=/mail, uid=211, bytes > Nov 21 19:24:22 iolaos dovecot: imap(user): Debug: quota-fs: uid=211, > value=2779115520, limit=8388608000 I am using (testing) version 2.2alpha1. Thankx. -- Andreas Kasenides Senior IT Officer University of Cyprus, Dept. of Computer Science Tel: 22892714, Fax: 22892701

2 1

[Dovecot] Plugin help, number of messages in mailbox
by Richard Platel 27 Nov '12

27 Nov '12

Hi, We use Dovecot for IMAP and POP (but not LDA), we want to do something when a user has an INBOX that becomes empty, or becomes not empty (set a flag in memcached, but that's not really important). I'm writing a plugin (for Dovecot 2.1.7). On mailbox_open() I can use mailbox_get_status() to get a count of messages in the mailbox, and then decrement this in expunge() or increment it in mailbox save_finish() (for IMAP APPEND or COPY commands). However in expunge() and mailbox_save_finish, even after calling the super function, mailbox_get_status doesn't update the number of messages in the mailbox. This is a problem if (for example) there are concurrent POP sessions. Two POP sessions could get all the messages in INBOX, one could logout, calling expunge a few times, eventually causing my plugin to note that the inbox is empty, then our LDA could deliver a message, mark the INBOX not empty, then the other POP session could log out, call expunge and cause my plugin to mark the INBOX empty, when it's not. So in summation: how can a plugin be notified of changes to a mailbox, and then accurately get the real number of messages in that mailbox?

2 1

[Dovecot] Folder layout after Cyrus to Dovecot migration
by Keith Edmunds 27 Nov '12

27 Nov '12

# dovecot --version 1.2.15 We're trying to migrate a server from Cyrus to Dovecot, and we're mostly there. On Cyrus, the folder layout in the MUA is: INBOX subfolder subfolder ... Sent Drafts Queue Trash Users cannot create sibling folders to the Inbox, only subfolders (and sub-subfolders, etc). We've replicated that with: -------------------------------------------------------------------------------- mail_location = maildir:/shared/imapmail/users/%u:INBOX=/shared/imapmail/users/%u:LAYOUT=fs namespace private { separator = / prefix = "INBOX/" inbox = yes } -------------------------------------------------------------------------------- ...however, the Sent/Drafts/Queue/Trash folders are now subfolders of Inbox. Cyrus seems to default to the above layout (at least, I can't find anywhere that defines it). There are no special settings in the MUA to achieve the abovev. Is there a way of replicating the above within Dovecot? We can probably go to V2 if we have to, but 1.2.15 would be preferable. Thanks, Keith

3 5

[Dovecot] cannot update mailbox - unable to lock for exclusive access
by 1st WebDesigns 27 Nov '12

27 Nov '12

Hi there, We're using Dovecot version 1.0.7 and Postfix, and since upgrading our Linux box we're getting this in the maillog: Nov 8 07:49:11 server1 postfix/local[27901]: 04B8E7081DA: to=<xyz(a)xyz.com>, orig_to=<abc(a)abc.com>, relay=local, delay=19, delays=0.07/0/0/19, dsn=4.2.0, status=deferred (cannot update mailbox /var/spool/mail/abc for user abc. unable to lock for exclusive access: Resource temporarily unavailable) Postfix is currently set to: mailbox_delivery_lock = fcntl, dotlock Dovecot has this: mbox_read_locks = fcntl mbox_write_locks = fcntl dotlock I've scoured the web and tried all kinds of different locking mechanisms and combinations to no avail. The mail is eventually delivered but on a busy day this can take several hours. In the evening it generally doesn't happen, which leads me to believe it occurs during the day when people have their mail clients open. However, this particular issue doesn't affect every user that has their mail client open, only some! We currently have the mailboxes in mbox format - yes I know we should upgrade to maildir which we will eventually, however we've been using mbox for the last 10 years and this has only become an issue since upgrading. What I have discovered this morning is a Dovecot connection that is open for 6 minutes before disconnection. During this 6 minutes the above problem occurs (new mail cannot get an exclusive lock). The same user will have connected and disconnected several times before and after, with a connection taking no more than a few seconds. But it seems sometimes the connection is taking longer than it should and I suspect the problem lies here. Please can anyone help! Thank you, G

3 15

[Dovecot] sieve + dkim
by Николай Клименко 26 Nov '12

26 Nov '12

message sent from the sieve-vacation does not contain dkim signature how to configure sieve to send messages via smtp transport with signing?

3 4

[Dovecot] IMAP proxy - can it detect parodying to itself?
by Graham Leggett 26 Nov '12

26 Nov '12

Hi all, I have some IMAP servers fronted with separate perdition processes, and it would be ideal if I could collapse this down to having dovecot do both the IMAP proxying and the IMAP serving at the same time on the same IP addresses. One of the fields in my LDAP entries contains the canonical name of the server that hosts their mailbox, and if I follow the manual at http://wiki2.dovecot.org/PasswordDatabase/ExtraFields#LDAP I could add the host field to enable proxying. My question is whether dovecot has the ability to notice whether dovecot is being asked to proxy to itself, in other words the value of "host" is the current dovecot server, and when this happens, ignore the proxy and just be a straight IMAP server, because the user has connected to the right box already. Is this possible? Regards, Graham --

2 2

Re: [Dovecot] doveadm fails with passdb authentication binds (dovecot 2.0.16)
by mailing lists 26 Nov '12

26 Nov '12

Hello, >> # doveadm mailbox list -u user001 >> doveadm(user001): Error: user user001: Auth PASS lookup failed >> doveadm(user001): Fatal: passdb lookup failed > Are you running this on a Dovecot proxy? It looks like doveadm wants to do a passdb lookup to find out which server should handle this user. Passdb lookups don't work with LDAP binding. But if everything else works then I think you simply shouldn't have enabled doveadm proxying. So, set doveadm_proxy_port back to 0? thank you Timo, setting doveadm_proxy_port to 0 did the trick.

1 0

[Dovecot] Missing Messages on IOS device
by David Morsberger 26 Nov '12

26 Nov '12

I just converted my old server running UW/Panda to a Mac Mini Server running Mountain Lion (ML) Server. I'm using the postfix / dovecot setup provided by Apple. My IMAP clients are not showing all my emails. The Mail App on my iPhone and iPad is behaving the worse. I can see the emails that are not showing up in the cur directory. The ML Mail App is stating there are 3854 emails in my INBOX. There are 3948 files in the 'cur' directory ('ls cur | wc -l' returns 3948). Other mailboxes and directories have the same behavior. I'm not sure what to expect here. My method of conversion was to bulk copy (drag and drop) all the messages from one the UW server to the Dovecot server using the Apple Desktop Mail App in Mountain Lion. Any idea why these messages are not showing up on my devices and how I can get them to show up? bash-3.2# /Applications/Server.app/Contents/ServerRoot/usr/sbin/dovecotd --version 2.0.19apple1 bash-3.2# /Applications/Server.app/Contents/ServerRoot/usr/sbin/dovecotd -n # 2.0.19apple1: /Library/Server/Mail/Config/dovecot/dovecot.conf # OS: Darwin 12.2.1 x86_64 hfs aps_topic = com.apple.mail.XServer.fc3bb7c3-c8ef-4fe2-aff3-95ecd927fb11 auth_mechanisms = cram-md5 x-plain-submit plain login apop digest-md5 auth_socket_path = /var/run/dovecot/auth-userdb auth_username_format = %n default_internal_user = _dovecot default_login_user = _dovenull disable_plaintext_auth = no first_valid_gid = 6 first_valid_uid = 6 mail_access_groups = mail mail_location = maildir:/Library/Server/Mail/Data/mail/%u mail_log_prefix = "%s(pid %p user %u): " mail_plugins = quota zlib fts fts_sk managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mdbox_rotate_size = 200 M passdb { args = /Library/Server/Mail/Config/dovecot/submit.passdb driver = passwd-file pass = yes submit = yes } passdb { driver = od } plugin { fts = sk quota = maildir:User quota quota_warning = storage=100%% quota-exceeded %u sieve = /Library/Server/Mail/Data/rules/%u/dovecot.sieve sieve_dir = /Library/Server/Mail/Data/rules/%u } postmaster_address = postmaster(a)mini.mmpcrofton.com protocols = imap pop3 lmtp sieve quota_full_tempfail = yes service auth { extra_groups = _keytabusers idle_kill = 15 mins unix_listener auth-userdb { user = _dovecot } } service dns_client { unix_listener dns-client { mode = 0600 } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } service_count = 0 } service imap { client_limit = 5 process_limit = 200 service_count = 0 } service lmtp { unix_listener lmtp { mode = 0600 } } service managesieve-login { inet_listener sieve { port = 4190 } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service pop3 { client_limit = 5 process_limit = 200 service_count = 0 } service quota-exceeded { executable = script /Applications/Server.app/Contents/ServerRoot/usr/libexec/dovecot/quota-exceeded.sh unix_listener quota-exceeded { group = mail mode = 0660 user = _dovecot } user = _dovecot } service quota-warning { executable = script /Applications/Server.app/Contents/ServerRoot/usr/libexec/dovecot/quota-warning.sh unix_listener quota-warning { group = mail mode = 0660 user = _dovecot } user = _dovecot } ssl_ca = </etc/certificates/*.chain.pem ssl_cert = </etc/certificates/*.cert.pem ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL:!ADH:!eNULL ssl_key = </etc/certificates/*.key.pem ssl_key_path = /etc/certificates/*.key.pem syslog_facility = local6 userdb { args = partition=/Library/Server/Mail/Config/dovecot/partition_map.conf enforce_quotas=no driver = od } verbose_proctitle = yes protocol lmtp { mail_plugins = quota zlib fts fts_sk sieve push_notify } protocol lda { mail_plugins = quota zlib fts fts_sk sieve push_notify } protocol imap { imap_id_log = * imap_id_send = "name" * "version" * mail_max_userip_connections = 20 mail_plugins = quota zlib fts fts_sk imap_quota imap_zlib imap_fts urlauth } protocol pop3 { mail_max_userip_connections = 6 }

1 0

[Dovecot] sieve-extprograms strips Return-Path headers
by Ben Morrow 25 Nov '12

25 Nov '12

The sieve-extprograms extension strips Return-Path headers before passing mail off to the external program. The patch to remove this behavious is trivial (and attached), but since it appears to be deliberate I felt I should investigate further. I believe this is basically a cut-and-paste error. The code to strip Return-Path has been there since the sieve-pipe plugin for Dovecot 1.x, and I believe it was copied from the equivalent code in the 'redirect' action for passing mail off to sendmail(8). In that case, stripping Return-Path is correct, since the message is being resubmitted for delivery (by SMTP or otherwise), and the last step of the new delivery will (should) add a new Return-Path header with the new envelope information. In the case of sieve-extprograms, though, the filtering is happening post-delivery, so a stripped Return-Path will never be replaced. Ben

2 1