December 2012 - dovecot

[Dovecot] Director and forwarding LDAP user as Master user
by Alexandr Sabitov 08 Jan '13

08 Jan '13

Hello guys, Would you be able to help me with this little issue. I bet someone has the same config so if you can copy-paste it I will very appreciate it. So main idea is to enable Dovecot director to authenticate a LDAP user with plain or encrypted password and send the user to back-end Dovecot server after the authentication. According to Wiki it is only possible if we use the master user to communicate to the back-end server. On the back-end Dovecot server it is working fine, I can log in as normal user/user_password or as user*masteruser/master_password. The back-end config is: auth_master_user_separator = * passdb { driver = passwd-file args = /usr/local/dovecot/etc/dovecot/passwd.masterusers master = yes pass = yes } passdb { driver = ldap args = /usr/local/dovecot/etc/dovecot/dovecot-ldap.conf.ext } userdb { driver = ldap args = /usr/local/dovecot/etc/dovecot/dovecot-ldap.conf.ext } Now front-end: how to get director forward the user to the back-end after authentication on the director? With my director config the user stays on the director all the time: passdb { driver = static args = proxy=y master=masteruser pass=master_password destuser=%u*masteruser } passdb { driver = ldap args = /usr/local/dovecot/etc/dovecot/dovecot-ldap.conf.ext } userdb { driver = ldap args = /usr/local/dovecot/etc/dovecot/dovecot-ldap.conf.ext } The only way to forward the user is to setup nopassword=y in args of static passdb but in that case the user will be authenticated on the backend but not on the director... What do I missing ? Please help me Best Regards, Alexandr Sabitov

2 2

[Dovecot] imap dumps core when connecting with mutt
by Arthur Titeica 05 Jan '13

05 Jan '13

Hello, I'm trying to investigate a problem with dovecot/imap dumping core when connecting connecting mith mutt (everything else works). imap(user@domain): Fatal: master: service(imap): child 31752 killed with signal 11 (core dumped) I managed to create a core file and passed that to gdb. The log is here [1]. I hope this helps - please tell me what else would be needed if not. Thanks. [1] http://paste.kde.org/622574/ -- Arthur Titeica

2 5

[Dovecot] Non-standard fields?
by Attila Nagy 04 Jan '13

04 Jan '13

Hi, Non-standard fields are mentioned here: http://wiki2.dovecot.org/MailboxFormat/Maildir and they are stated as currently not used. Questions: - am I right that if they will be used, they will be key=value pairs, like fields in the base filename? Like: 1035478339.27041_118.foo.org,S=1000,W=1030:2,S,X=12,A=something - or are they supposed to be flags, like: 1035478339.27041_118.foo.org,S=1000,W=1030:2,S,ABCD - are there any plans to utilize these? Thanks,

2 2

[Dovecot] Dovecot Virtual Users with Sendmail
by DormitionSkete＠hotmail.com 04 Jan '13

04 Jan '13

I'm trying to get Dovecot working with Virtual Users and Sendmail on OpenIndiana 151a7. OpenIndiana is the Open Source continuation of OpenSolaris after Oracle tried to kill it off a couple of years ago shortly after acquiring Sun Microsystems. I'm not sure if this is so much a Dovecot problem, as much of a Sendmail problem. I thought this would probably be a better list to start with, though. If not, please let me know. I initially used this Dovecot wiki page to approach this: Simple Virtual User Installation http://wiki2.dovecot.org/HowTo/SimpleVirtualInstall I had to make few minor changes, but I don't think anything significant to the problem I'm having. I can log into SquirrelMail with both virtual users, and with system users. I can send mail to system users from both virtual and system users. I can see the mail that I sent in the Sent Messages folder for both types of users. I just can't send mail to virtual users. When I try to, I get the following message: ERROR: Message not sent. Server replied: Requested action not taken: mailbox unavailable 550 5.1.1 <dswebstore@localhost>... User unknown My configuration info is as follows: systemuser@openindiana:~# /usr/local/sbin/dovecot --version 2.1.12 systemuser@openindiana:~# /usr/local/sbin/dovecot -n # 2.1.12: /usr/local/etc/dovecot/dovecot.conf # OS: SunOS 5.11 i86pc auth_verbose = yes base_dir = /var/run/dovecot/ disable_plaintext_auth = no first_valid_uid = 101 info_log_path = /var/log/dovecot-info.log log_path = /var/log/dovecot.log mail_location = mbox:/home/vmail/%u/mail:INBOX=/var/mail/%u passdb { args = /usr/local/etc/dovecot/passwd driver = passwd-file } pop3_uidl_format = %g protocols = imap pop3 service auth { unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } ssl = no userdb { args = uid=vmail gid=vmail home=/home/vmail/%u driver = static } protocol lda { postmaster_address = systemuser@localhost } --- My dovecot password file looks something like this, though changed for obvious security reasons: systemuser:{PLAIN} systemuserPASS virtualuser1:{PLAIN}virtualuser1PASS virtualuser2:{PLAIN}virtualuser2PASS --- I read on this page that I needed to put the following in my sendmail dovecot.m4 file: Dovecot LDA with Sendmail http://wiki2.dovecot.org/LDA/Sendmail So this is my dovecot.m4 file, which shows up in my sendmail.cf file after recompiling my sendmail.mc file. ######################*****############## ### DOVECOT Mailer specification ### ##################*****################## Mdovecot, P=/usr/local/libexec/dovecot/dovecot-lda, F=DFMPhnu9, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP/HdrFromSMTP, T=DNS/RFC822/X-Unix, A=/usr/local/libexec/dovecot/dovecot-lda -d $u --- Finally, this is my sendmail.mc file: divert(-1) # # Copyright (c) 1983 Eric P. Allman # Copyright (c) 1988, 1993 # The Regents of the University of California. All rights reserved. # # Copyright 2009 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # This is a configuration file for SunOS 5.8 (a.k.a. Solaris 8) and later # subsidiary machines. It has support for local and SMTP mail. The # confFALLBACK_SMARTHOST macro is enabled, which means that messages will # be sent to that host (which is set to mailhost.$m [$m is the local domain]) # if MX records are unavailable. A short-cut rule is also defined, which # says if the recipient host is in the local domain, send to it directly # instead of the smart host. # # If you want to customize this further, copy it to a name appropriate # for your environment and do the modifications there. # divert(0)dnl VERSIONID(`sendmail.mc (Sun)') OSTYPE(`solaris8')dnl DOMAIN(`solaris-generic')dnl define(`confFALLBACK_SMARTHOST', `mailhost$?m.$m$.')dnl define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail')dnl FEATURE(local_procmail,`',`procmail -t -Y -a $h -d $u')dnl MAILER(`local')dnl MAILER(`smtp')dnl MAILER(`procmail')dnl MAILER(`dovecot')dnl LOCAL_NET_CONFIG R$* < @ $* .$m. > $* $#esmtp $@ $2.$m $: $1 < @ $2.$m. > $3 --- I think it is obvious that it is a problem with Sendmail not recognizing Dovecot's virtual users. But how do I fix it? If anyone could help me with this, I would *greatly* appreciate it. I've been picking away at this for about three weeks now, and I'm pretty much out of ideas of anything else to try. Cordially, Peter, hieromonk ---- Dormition Skete Monastery Website: http://www.DormitionSkete.org Convent Website: http://www.HolyApostlesConvent.org ----

5 16

[Dovecot] clucene-config.h location
by Dimitri 04 Jan '13

04 Jan '13

By deafult, CLucene installs the clucene-config.h header to /usr/lib/CLucene, but fts-lucene tries to include it from /usr/include/CLucene and fails. Here is how it is fixed in Fedora, for instance: sed -i '/DEFAULT_INCLUDES *=/s|$| '"$(pkg-config --cflags libclucene-core)|" src/plugins/fts-lucene/Makefile.in Indeed, Lucene's pkgconfig file reflects the fact that some headers reside in /usr/lib/CLucene. It would be great if Dovecot used pkgconfig for CLucene. Thanks, Dimitri Mageia Linux packager

2 1

[Dovecot] Dovecot 1.2.7 and Roundcube LIST-EXTENDED commands
by aristidis fesarlis 04 Jan '13

04 Jan '13

Hi all, we use Dovecot 1.2.7 with Maildir, and recently we have set up the latest Roundcube webmail. Inside its config file,it is mentioned that: // By default list of subscribed folders is determined using LIST-EXTENDED // extension if available. Some servers (dovecot 1.x) returns wrong results // for shared namespaces in this case. http://trac.roundcube.net/ticket/1486225 // Enable this option to force LSUB command usage instead. I notice that it seems to work fine, though. We don't have shared namespaces. So my question is: should I change it to LSUB, or will I have problems with my Maildir subscriptions? Thanks

2 1

[Dovecot] Kerberos/GSSAPI auth via .k5login file
by Jörg Herzinger 04 Jan '13

04 Jan '13

Hi, we are currently moving our mailserver to a new server with Dovecot, virtual users in LDAP, Passwords in Kerberos Setup. Everything works fine except for GSSAPI which seems to be a bit buggy. The thing is, that when using a .k5login [1] file it seems that SASL does not get passed the home directory specified userdb. In other words, mails for user1 (see below) are stored in /home/domain.at/user1, while the home dir defined in LDAP is /afs/domain.at/home/user1 (virtual users, so only dovecot, not the system does know about this user and home dir). If I do create a .k5login file in /home/domain.at/user1 with the content "someotheruser(a)DOMAIN.AT", then someotheruser should be able to authenticate himself as user1 via GSSAPI. However, this .k5login file is completely ignored. So it seems to me that the home is not passed on to SASL. If I do add ldap to my nsswitch (for testing only) I additionally have real system users. Now if I create a .k5login in their home defined in LDAP which now also the system knows about everything works just fine. It is still the wrong home since its the one in LDAP and not the one defined by dovecot but at least it shows that our setup is working. See also debug log output below, a failed GSSAPI attempt produces no log output at all. Our System is Debian Wheezy on an amd64 (virtualized), dovecot Version 2.1.7, filesystem is ext4. Everything is tested with Firefox 17.0 on an Ubuntu Lucid client. Example LDAP user (not all of it...): ===================== dn: uid=user1,ou=people,dc=domain,dc=at structuralObjectClass: inetOrgPerson objectClass: inetOrgPerson objectClass: posixAccount objectClass: qmailUser uid: username uidNumber: 12345 gidNumber: 100 mail: username(a)domain.at homeDirectory: /afs/domain.at/home/user1 userPassword: {sasl}user1(a)DOMAIN.AT And our dovecot userdb/passdb looks like this: ============================ root@mail201212 /etc/dovecot (git)-[master] # cat conf.d/10-auth.conf auth_gssapi_hostname = "$ALL" auth_krb5_keytab = /etc/dovecot/imap_smtp_mail201212.keytab auth_mechanisms = plain gssapi !include auth-virtual.conf.ext root@mail201212 /etc/dovecot (git)-[master] # cat conf.d/auth-virtual.conf.ext mail_uid = mailowner mail_gid = mailowner userdb { driver = ldap args = /etc/dovecot/ldap-userdb-user_g2.conf.ext } passdb { driver = pam } root@mail201212 /etc/dovecot (git)-[master] # cat /etc/dovecot/ldap-userdb-user_g2.conf.ext #http://www.postfix.org/ldap_table.5.html hosts = ldap1 ldap2 base = ou=people,dc=domain,dc=at user_attrs = uid=home=/home/domain.at/%$ user_filter = (&(objectClass=inetOrgPerson)(|(mail=%u)(mailalternateaddress=%u)(uid=%u))) Debug log output with system users (testing only) and a working GSSAPI auth: ================================================ Dec 28 14:18:40 mail201212 dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Dec 28 14:18:40 mail201212 dovecot: auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libdriver_mysql.so Dec 28 14:18:40 mail201212 dovecot: auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libdriver_pgsql.so Dec 28 14:18:40 mail201212 dovecot: auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libdriver_sqlite.so Dec 28 14:18:40 mail201212 dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Dec 28 14:18:40 mail201212 dovecot: auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libmech_gssapi.so Dec 28 14:18:40 mail201212 dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Dec 28 14:18:40 mail201212 dovecot: auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libauthdb_ldap.so Dec 28 14:18:40 mail201212 dovecot: auth: Debug: passwd-file /etc/dovecot/shared_users: Read 1 users in 0 secs Dec 28 14:18:40 mail201212 dovecot: auth: Debug: auth client connected (pid=11875) Dec 28 14:18:41 mail201212 dovecot: auth: Debug: client in: AUTH#0111#011GSSAPI#011service=imap#011secured#011session=1RaMgOnRZADAqCoq#011lip=192.168.43.100#011rip=192.168.42.42#011lport=993#011rport=55140 Dec 28 14:18:41 mail201212 dovecot: auth: Debug: gssapi(?,192.168.42.42,<1RaMgOnRZADAqCoq>): Using all keytab entries Dec 28 14:18:41 mail201212 dovecot: auth: Debug: client out: CONT#0111#011 Dec 28 14:18:41 mail201212 dovecot: auth: Debug: client in: CONT<hidden> Dec 28 14:18:41 mail201212 dovecot: auth: Debug: gssapi(user1(a)domain.at,192.168.42.42,<1RaMgOnRZADAqCoq>): security context state completed. Dec 28 14:18:41 mail201212 dovecot: auth: Debug: client out: CONT#0111#011YIGZBgkqhkiG9xIBAgICAG+BiTCBhqADAgEFoQMCAQ+iejB4oAMCARKicQRvMQu0Yxgom2SVOHW25FpxDbqalw/8nuMN1XH78FJUzJ/7CIv9dlQNUrKjFywqS9kNOxQY2sJR 7Ii0hw3i7BGV3VPmoeRJOsbYD5ahBh74NKqxdacN6rLj/cO5vWCee6Oel3rPgLV8kEcOVZOdAt6y Dec 28 14:18:41 mail201212 dovecot: auth: Debug: client in: CONT<hidden> Dec 28 14:18:41 mail201212 dovecot: auth: Debug: gssapi(user1(a)domain.at,192.168.42.42,<1RaMgOnRZADAqCoq>): Negotiated security layer Dec 28 14:18:41 mail201212 dovecot: auth: Debug: client out: CONT#0111#011BQQF/wAMAAAAAAAAC5QPNQH///+qs6lgevrvypjd1l4= Dec 28 14:18:41 mail201212 dovecot: auth: Debug: client in: CONT<hidden> Dec 28 14:18:41 mail201212 dovecot: auth: Debug: client out: OK#0111#011user=user1 Dec 28 14:18:41 mail201212 dovecot: auth: Debug: master in: REQUEST#0111935278081#01111875#0111#0118d08e90a585981154d7c045ca230b1f9 Dec 28 14:18:41 mail201212 dovecot: auth: Debug: ldap(user1,192.168.42.42,<1RaMgOnRZADAqCoq>): user search: base=ou=people,dc=domain,dc=at scope=subtree filter=(&(objectClass=inetOrgPerson)(|(mail=user1)(mailalternateaddress=user1)(uid=user1))) fields=uid Dec 28 14:18:41 mail201212 dovecot: auth: Debug: ldap(user1,192.168.42.42,<1RaMgOnRZADAqCoq>): result: uid=user1 Dec 28 14:18:41 mail201212 dovecot: auth: Debug: master out: USER#0111935278081#011user1#011home=/home/domain.at/user1 Dec 28 14:18:41 mail201212 dovecot: imap-login: Login: user=<user1>, method=GSSAPI, rip=192.168.42.42, lip=192.168.43.100, mpid=11878, TLS, session=<1RaMgOnRZADAqCoq> Dec 28 14:18:41 mail201212 dovecot: imap(user1): Debug: Effective uid=996, gid=997, home=/home/domain.at/user1 Dec 28 14:18:41 mail201212 dovecot: imap(user1): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/maildir Dec 28 14:18:41 mail201212 dovecot: imap(user1): Debug: maildir++: root=/home/domain.at/user1/maildir, index=, control=, inbox=/home/domain.at/user1/maildir, alt= Dec 28 14:18:41 mail201212 dovecot: imap(user1): Debug: Namespace : type=public, prefix=PublicLists/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=no location=maildir:/home/listcaptor/maildir/ Dec 28 14:18:41 mail201212 dovecot: imap(user1): Debug: maildir++: root=/home/listcaptor/maildir, index=, control=, inbox=, alt= [1] http://web.mit.edu/kerberos/krb5-current/doc/user/user_config/k5login.html -- Jörg Herzinger - EDV Team GLOBAL 2000 - Friends of the Earth Austria Neustiftgasse 36, A-1070 Wien tel +43-699-14200030 Dieses Mail wurde mit Oekostrom und Opensource Software erstellt.

3 2

[Dovecot] corrupt mdbox, force-resync segfaults
by Metro Domain Admin 03 Jan '13

03 Jan '13

I could use some help with a corrupt mdbox. doveadm force-resync is crashing (see below), but I really need just to get this account functioning. What's my next step, as far as deleting index files? These were the earliest errors I could find: Nov 28 09:40:21 macy dovecot[6615]: imap(cory(a)metro-email.com): Error: Corrupted index cache file /opt/mail/metro-email.com/cory/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index.cache: field index too large (66 >= 30)Nov 28 09:40:21 macy dovecot[6615]: imap(cory(a)metro-email.com): Error: mdbox map /opt/mail/metro-email.com/cory/mdbox/storage/dovecot.map.index corrupted: Unexpectedly lost INBOX uid=1233 map_uid=1708 As for the segfaults, I am getting this regardless of which mailbox I specify: # /opt/dovecot/bin/doveadm -Dv force-resync -u cory INBOX doveadm(root): Debug: Loading modules from directory: /opt/dovecot/lib/dovecot doveadm(root): Debug: Module loaded: /opt/dovecot/lib/dovecot/lib15_notify_plugin.so doveadm(root): Debug: Module loaded: /opt/dovecot/lib/dovecot/lib20_fts_plugin.so doveadm(root): Debug: Module loaded: /opt/dovecot/lib/dovecot/lib20_mail_log_plugin.so doveadm(root): Debug: Module loaded: /opt/dovecot/lib/dovecot/lib21_fts_squat_plugin.so doveadm(root): Debug: Loading modules from directory: /opt/dovecot-2.1.10/lib/dovecot/doveadm doveadm(root): Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: dlopen(/opt/dovecot-2.1.10/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so, 10): Symbol not found: _acl_user_module Referenced from: /opt/dovecot-2.1.10/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so Expected in: flat namespace in /opt/dovecot-2.1.10/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: dlopen(/opt/dovecot-2.1.10/lib/dovecot/doveadm/lib10_doveadm_expire_plugin.so, 10): Symbol not found: _expire_set_deinit Referenced from: /opt/dovecot-2.1.10/lib/dovecot/doveadm/lib10_doveadm_expire_plugin.so Expected in: flat namespace in /opt/dovecot-2.1.10/lib/dovecot/doveadm/lib10_doveadm_expire_plugin.so (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: dlopen(/opt/dovecot-2.1.10/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so, 10): Symbol not fo und: _quota_user_module Referenced from: /opt/dovecot-2.1.10/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so Expected in: flat namespace in /opt/dovecot-2.1.10/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: dlopen(/opt/dovecot-2.1.10/lib/dovecot/doveadm/lib10_doveadm_zlib_plugin.so, 10): Symbol not found: _i_stream_create_deflate Referenced from: /opt/dovecot-2.1.10/lib/dovecot/doveadm/lib10_doveadm_zlib_plugin.so Expected in: flat namespace in /opt/dovecot-2.1.10/lib/dovecot/doveadm/lib10_doveadm_zlib_plugin.so (this is usually intentional, so just ignore this message) doveadm(root): Debug: Module loaded: /opt/dovecot-2.1.10/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so doveadm(cory): Debug: auth input: cory(a)domain.com uid=302 gid=6 home=/opt/mail/domain.com/cory doveadm(cory): Debug: changed username to cory(a)domain.com doveadm(cory): Debug: Effective uid=302, gid=6, home=/opt/mail/domain.com/cory doveadm(cory): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:/opt/mail/domain.com/cory/mdbox doveadm(cory): Debug: fs: root=/opt/mail/domain.com/cory/mdbox, index=, control=, inbox=, alt= doveadm(cory): Debug: Namespace : Using permissions from /opt/mail/domain.com/cory/mdbox: mode=0700 gid=-1 doveadm(cory): Warning: mdbox /opt/mail/domain.com/cory/mdbox/storage: rebuilding indexes doveadm(cory): Error: mdbox /opt/mail/domain.com/cory/mdbox/storage: Duplicate GUID c3bbb2234d93af505873010097ac0257 in m.1:428519 and m.1:441340 doveadm(cory): Error: mdbox /opt/mail/domain.com/cory/mdbox/storage: Duplicate GUID c3bbb2234d93af505873010097ac0257 in m.1:428519 and m.1:453628 [...] doveadm(cory): Error: mdbox /opt/mail/domain.com/cory/mdbox/storage: Duplicate GUID d45f7f111894af506273010097ac0257 in m.83:8565306 and m.83:8594879 Segmentation fault: 11 macy:postfix root# /opt/dovecot/bin/doveconf -n # 2.1.10: /opt/dovecot-2.1.10/etc/dovecot/dovecot.conf doveconf: Warning: service anvil { client_limit=1000 } is lower than required under max. load (1503) # OS: Darwin 11.4.2 x86_64 auth_cache_negative_ttl = 0 auth_cache_size = 1 M auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login auth_username_format = %n(a)domain.com auth_verbose = yes auth_verbose_passwords = plain default_internal_user = _dovecot default_login_user = _dovenull default_process_limit = 500 disable_plaintext_auth = no first_valid_uid = 300 instance_name = dovecot-2.1.10 listen = 192.168.20.123 mail_debug = yes mail_location = mdbox:%h/mdbox mail_plugin_dir = /opt/dovecot/lib/dovecot mail_plugins = fts fts_squat mail_log notify mail_privileged_group = mail maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mdbox_rotate_size = 10 M namespace inbox { inbox = yes location = prefix = separator = / } passdb { args = scheme=CRYPT username_format=%u /opt/dovecot/etc/dovecot/users driver = passwd-file } plugin { fts = squat mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size from subject } protocols = imap lmtp service aggregator { fifo_listener replication-notify-fifo { mode = 00 } } service auth { unix_listener /opt/local/var/spool/postfix/private/auth { group = _postfix mode = 0660 user = _postfix } unix_listener auth-userdb { group = mail mode = 0660 user = admin } } service director { fifo_listener login/proxy-notify { mode = 00 } } service imap { executable = imap postlogin } service lmtp { unix_listener /opt/local/var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service postlogin { executable = script-login rawlog -t } service stats { fifo_listener stats-mail { mode = 00 } } ssl_cert = </apposite/etc/ssl/mail_domain_com/mail_domain_com.crt ssl_key = </apposite/etc/ssl/mail_domain_com/mail_domain_com.key userdb { args = username_format=%u /opt/dovecot/etc/dovecot/users driver = passwd-file } verbose_proctitle = yes protocol imap { mail_max_userip_connections = 16 }

2 2

[Dovecot] Vacation Notice Not Working
by Ch Chai 03 Jan '13

03 Jan '13

To Dovecot, When I try to active Vacation Notice using Egroupware, I can see (xxxx.sieve) generated in mail server. but not working. OS : Fedora 14 Installed Packages: - Postfix - Dovecot (2.0.15) note : come with Fedora 14 - Dovecot-pigeonhole (2.0.15) note: come with Fedora 14 - ispconfig 2 - Egroupware (Email Client) my setting in /etc/dovecot/dovecot.conf protocols = sieve imap pop3 plugin { plugin = sieve sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } service managesieve-login { inet_listener managesieve-login { address = * port = 2000 } } protocol lda { #hostname = example.com mail_plugins = sieve quota postmaster_address = postmaster(a)example.com auth_socket_path = /var/run/dovecot/auth-master log_path = /var/log/dovecot-deliver.log } protocol sieve { managesieve_implementation_string = Cyrus timsieved v2.2.13 managesieve_logout_format = bytes ( in=%i : out=%o ) managesieve_max_line_length = 65536 }

4 10

[Dovecot] dovecot crashing?
by Eric 30 Dec '12

30 Dec '12

Happy holidays! I am experiencing an issue when trying to check my mail using IMAP. with Dovecot I have tried checking my mail using a full GUI client (Thunderbird) and telnet. Both times I get disconnected before all of my messages can be downloaded and I see an error in my mail log. Here are the details: [root@cust19-1-prod-domain userqa]# dovecot --version 2.0.9 [root@cust19-1-prod-domain userqa]# dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-164.11.1.el5 x86_64 CentOS release 5.4 (Final) disable_plaintext_auth = no login_trusted_networks = 172.19.136.0 mail_location = maildir:~/Maildir mail_max_userip_connections = 100 mbox_write_locks = fcntl mmap_disable = yes passdb { args = scheme=plain username_format=%n /etc/dovecot/users driver = passwd-file } protocols = imap ssl = no userdb { args = username_format=%n /etc/dovecot/users driver = passwd-file } [root@cust19-1-prod-domain userqa]# i try to check my mail: username@ops1-1-domain:~$ telnet cust19-1-prod-domain imap Trying 172.19.136.223... Connected to cust19-1-prod-domain.domain.net (172.19.136.223). Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. 1 LOGIN userqa mypassword 1 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS] Logged in 3 EXAMINE INBOX * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 1 EXISTS * 0 RECENT * OK [UNSEEN 1] First unseen. * OK [UIDVALIDITY 1356130761] UIDs valid * OK [UIDNEXT 5] Predicted next UID * OK [HIGHESTMODSEQ 1] Highest 3 OK [READ-ONLY] Select completed. 4 FETCH 1 BODY[] I get some binary output and some mail headers, but then it crashes.. Not sure if you guys want to see all of the extremely verbose output, so I put it at the end of this message. The last messages that it processes is a message with an Excel spreadsheet attached to it (a .xlsx file) i enabled core dumps: echo 'DAEMON_COREFILE_LIMIT="unlimited"' >> /etc/sysconfig/dovecot Now I see this in /var/log/maillog: 2012-12-25T17:53:47-08:00 cust19-1-prod-domain dovecot: master: Error: service(imap): child 11265 killed with signal 11 (core dumped) core dumps are being written here, but they're empty: [root@cust19-1-prod-domain userqa]# pwd /mnt/mail/userqa [root@cust19-1-prod-domain userqa]# ls -lh total 20K -rw------- 1 userqa userqa 0 Dec 25 17:52 core.11111 -rw------- 1 userqa userqa 0 Dec 25 17:53 core.11265 -rw------- 1 userqa userqa 0 Dec 25 17:58 core.11812 drwx------ 7 userqa userqa 4.0K Dec 25 17:58 Maildir [root@cust19-1-prod-domain userqa]# What should I try now? Is it possible that Dovecot is having difficulty processing the attachment file? If I delete this user's mailbox file and send basic text e-mail to the user I can read/retrieve them just fine.. there only seems to be an issue when this message with its attachment arrives. The attachment seems small in size: Content-Disposition: attachment; filename="report_amex.xlsx"; size=20527; That means the attachment is 20527 bytes, correct? Thank you for any suggestions/help you can offer! Here's the message that it seems to be having issues with: Return-Path: <user(a)company.com> Received: from mxout.mailprovider.com (slb1-prod-domain.domain.net[172.19.136.4]) by cust19-1-prod-domain.domain.net (8.13.8/8.13.8) with ESMTP id qBOM8oIE029715 for <userqa_2938(a)integration.company.com>; Mon, 24 Dec 2012 14:08:50 -0800 Received: from mxout.mailprovider.com (localhost [127.0.0.1]) by mxout.mailprovider.com (Postfix) with ESMTP id 017E455325B for <userqa_2938(a)integration.company.com>; Mon, 24 Dec 2012 17:08:51 -0500 (EST) X-Virus-Scanned: by SpamTitan at mail.lan Received: from HUB025.mail.lan (unknown [10.110.2.1]) by mxout.mailprovider.com (Postfix) with ESMTP id 63DA0553132 for <userqa_2938(a)integration.company.com>; Mon, 24 Dec 2012 17:08:50 -0500 (EST) Received: from MAILR001.mail.lan ([10.110.18.28]) by HUB025.mail.lan ([10.110.17.25]) with mapi; Mon, 24 Dec 2012 17:08:48 -0500 From: User Name <user(a)company.com> To: "userqa_2938(a)integration.company.com" <userqa_2938(a)integration.company.com> Date: Mon, 24 Dec 2012 17:08:47 -0500 Subject: Thread-Index: Ac3fx0lCAoza6rTzQTSh8g52mx84GwAC2GGwAAH1lkAAkiyekA== Message-ID: <0370E60157CA7E4097D81B9E09728A941CB269A29D(a)MAILR001.mail.lan> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: yes X-MS-TNEF-Correlator: acceptlanguage: en-US Content-Type: multipart/mixed; boundary="_004_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_" MIME-Version: 1.0 --_004_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_ Content-Type: multipart/alternative; boundary="_000_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_" --_000_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable From: User Name Sent: Friday, December 21, 2012 6:23 PM To: 'userqa_2938(a)integration.company.com' Subject: FW: With Best Regards, User Name From: User Name Sent: Friday, December 21, 2012 5:27 PM To: 'userqa_2938(a)integration.company.com' Subject: FW: With Best Regards, User Name From: User Name Sent: Friday, December 21, 2012 4:05 PM To: 'userqa_2938(a)integration.company.com' Subject: With Best Regards, User Name --_000_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"><head><META HTTP-EQUIV=3D"Content-Type" CONTENT= =3D"text/html; charset=3Dus-ascii"><meta name=3DGenerator content=3D"Micros= oft Word 12 (filtered medium)"><style></style></head><body lang=3DEN-US link=3Dblue vli= nk=3Dpurple><div class=3DWordSection1><o:p> </o:p><o:p> </o:p><div><s= pan style=3D'color:#1F497D'>With Best Regards,<o:p></o:p>User Name<o:p></o:p></= p>______________________= _<o:p></o:p>s= kype: user<o:p></o:p>cell phone: +1 224 600 0072<o:p></o:p></div><o:p> </o:p><div= ><div style=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in= 0in 0in'>From: User Name Sent: Friday, Dec= ember 21, 2012 6:23 PM To: 'userqa_2938(a)integration.aggregateknow= ledge.com' Subject: FW: <o:p></o:p></div></div><o:p> </o:p><o:p> </o:p><div>With Best Regards,<o:p></o:p>User Name<o:p></o:p>_______________________<o:p></= o:p>skype: eg= irik<o:p></o:p>cell phone: +1 224 600 0072<o:p></o:p></div><o:p> </o:p><div><div styl= e=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>= From: User Name Sent: Friday, December 21, = 2012 5:27 PM To: 'userqa_2938(a)integration.company.com'= Subject: FW: <o:p></o:p></div></div><o:p> </o:p><o:p> </o:p><div>With Best Regards,<o:p></o:p><spa= n style=3D'color:#1F497D'>User Name<o:p></o:p>_______________________<o:p></o:p></span= >skype: user<o:p><= /o:p>cell pho= ne: +1 224 600 0072<o:p></o:p></div><o:p> </o:p><div><div style=3D'borde= r:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>From: User Name Sent: Friday, December 21, 2012 4:0= 5 PM To: 'userqa_2938(a)integration.company.com' S= ubject: <o:p></o:p></div></div><o:p>&nb= sp;</o:p><o:p> </o:p><o:p> </o:p>With Best Regards,<o:p></o:p></p= >User Name<o:p></o:p>______= _________________<o:p></o:p>skype: user<o:p></o:= p>cell phone: +1 224 600 0072<o:p></o:p><o:p> </o:p></div></body></html>= --_000_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_-- --_004_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_ Content-Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet; name="report_company.xlsx" Content-Description: report_company.xlsx Content-Disposition: attachment; filename="report_company.xlsx"; size=20527; creation-date="Thu, 11 Oct 2012 22:38:14 GMT"; modification-date="Mon, 24 Dec 2012 22:08:22 GMT" Content-Transfer-Encoding: base64 UEsDBBQABgAIAAAAIQDretKTYgEAAJAEAAATANwBW0NvbnRlbnRfVHlwZXNdLnhtbCCi2AEooAAC AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAArFTLTsMwELwj8Q+RryhxywEh1LQHHkeoBHyAsTeNVce2vNvS/j2bhFaASqSq vSSKop2ZnRl7Mts0LltDQht8KcbFSGTgdTDWL0rx/vaU34oMSXmjXPBQii2gmE0vLyZv2wiY8bTH UtRE8U5K1DU0CosQwfOfKqRGEX+mhYxKL9UC5PVodCN18ASecmoxxHTywgKSNZDNVaJn1TCP3DhJ jAb9c1wwnsju+8GWuxQqRme1IlYu1978Yc1DVVkNJuhVw1xFB3bVosh/CZG2DvBkKowJlMEagBpX 9KA75geo1MpR9rhhB3rTEzg8brVvMwue7NbH2kYcYBj2btiTz5CWHyEsz+1K607RKOt3ug+VgNOb pxBRctYnC4DWcgMmjwwJiSzsPTvEzQVsd+9iRNm9Tm/h72rs8Yc8YB1YqwTmlRKfyrPX8yf2kI59 FjokOD6MXWfb6QMJyO4+mX4BAAD//wMAUEsDBBQABgAIAAAAIQC1VTAj9QAAAEwCAAALAM4BX3Jl bHMvLnJlbHMgosoBKKAAAgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAADlDAAAeGwv c3R5bGVzLnhtbFBLAQItABQABgAIAAAAIQDppiW4ggYAAFMbAAATAAAAAAAAAAAAAAAAALIUAAB4 bC90aGVtZS90aGVtZTEueG1sUEsBAi0AFAAGAAgAAAAhAOhJXyi8LAAAyx8BABgAAAAAAAAAAAAA AAAAZRsAAHhsL3dvcmtzaGVldHMvc2hlZXQxLnhtbFBLAQItABQABgAIAAAAIQAU45/9UAEAAGMC AAARAAAAAAAAAAAAAAAAAFdIAABkb2NQcm9wcy9jb3JlLnhtbFBLAQItABQABgAIAAAAIQBxujxc hQEAAAMDAAAQAAAAAAAAAAAAAAAAAN5KAABkb2NQcm9wcy9hcHAueG1sUEsFBgAAAAAKAAoAgAIA AJlNAAAAAA== --_004_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_-- Connection closed by foreign host.

3 5