August 2012 - dovecot

[Dovecot] execvp /usr/local/libexec/dovecot/dovecot-lda: Permission denied
by Edward Carraro 09 Aug '13

09 Aug '13

I'm trying to follow the instructions for configuring Dovecot LMTP with postfix for virtual domains but whenever mail arrives, in /var/log/maillog, I see Sep 23 16:01:20 mybox postfix/pipe[572]: 999C83206C6: to=< user(a)mytest.domain.com>, relay=dovecot, delay=0.08, delays=0.04/0.01/0/0.03, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/local/libexec/dovecot/dovecot-lda: Permission denied ) ls -lh for /usr/local/libexec/dovecot/dovecot-lda -rwxr-xr-x 1 root staff 62K Sep 20 15:15 dovecot-lda It will deliver mail when I do the sudo invocation of dovecot-lda, but I thought LMTP was suppose to be an alternative to that postfix/main.cf: virtual_transport = dovecot virtual_mailbox_domains = mytest.domain.com dovecot_destination_recipient_limit = 1 /etc/postfix/master.cf: dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/dovecot-lda -f ${sender} -d ${recipient} /usr/local/etc/dovecot/conf.d/10-master.conf: service auth { unix_listener auth-userdb { mode = 0600 user = vmail #group = vmail } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } inet_listener lmtp { port = 24 } user = vmail } Did I miss something in my config?

7 9

[Dovecot] Wrong remote IP (rip) in mail.log using IMAP login
by tyli 02 Aug '13

02 Aug '13

Dear list users While trying to secure our dovecot server with fail2ban I came across the following problem: We use dovecot (1.2.9, ubuntu package) behind a NAT, and failed login attempts are logged with our firewall as the remote ip. Example: Apr 15 08:36:26 mail dovecot: imap-login: Disconnected (auth failed, 6 attempts): user=<xy>, method=PLAIN, rip=192.168.0.1, lip=192.168.0.3 Therefore I would ban 192.168.0.1 which means that I ban EVERY user. Funny thing is that POP3 login attempts are logged correctly: Apr 13 11:05:50 mail dovecot: pop3-login: Disconnected (auth failed, 1 attempts): user=<sgvyniwx>, method=PLAIN, rip=217.81.27.55, lip=192.168.0.3 Any ideas how to change this? Thanks in advance tyli

5 5

[Dovecot] Proxying improvements in v2.1.2
by Timo Sirainen 16 Jul '13

16 Jul '13

I just committed a couple of features that will make life easier for some types of proxying setups: 1. IMAP proxying has already for a while supported sending local/remote IP/port to backend server, which can use it for logging and other purposes. I've now implemented this for POP3 as well, although only the remote IP/port is forwarded, not local IP/port. I implemented this also for LMTP in v2.2 tree, but haven't bothered to backport that change. Both POP3 and LMTP uses XCLIENT command that is compatible to Postfix's (XCLIENT ADDR=1.2.3.4 PORT=110). 2. proxy_maybe=yes + host=host.example.com actually works now. As long as host.example.com DNS lookup returns one IP that belongs to the current server the proxying is skipped. 3. auth_proxy_self = 1.2.3.4 setting means that if proxy_maybe=yes and host=1.2.3.4 then Dovecot assumes that this is a local login and won't proxy it, even if 1.2.3.4 isn't the actual local IP. This can be helpful if the host field contains load balancer's IP address instead of the server's. You can add more than one IP (space separated) and of course everything related to this works just as well with hostnames as with IPs (even when hostname expands to multiple IPs).

2 2

[Dovecot] Zero-sized Maildir files and index corruption on over-quota
by Edgar Fuß 28 Jun '13

28 Jun '13

We are using Postfix as an MTA delivering via Dovecot's LDA (with sieve). We also use Dovecot as a POP/IMAP server. Mail storage is Maildir on NFS, indexes are stored locally. Quotas are FS quotas enforced by the NFS server. The Dovecot version is 1.2.11. Recently, for one user being over quota, some attempts to deliver mail bounced as expected while some others resulted in zero-sized Maildir files. I can verify zero-sized files in cur, while I cannot tell whether they were already zero-sized in new. However, since nobody except Dovecot is accessing the mail storage, it's either Dovecot's LDA or Dovecot's IMAP producing the zero-sized files. Logs show successful delivery (deliver: stored mail into mailbox 'INBOX') but ,,Corrupted index cache file /var/db/dovecot/indexes/XXX/.INBOX/dovecot.index.cache: Corrupted virtual size for uid=YYY: 0 != NNNN'' alerts on IMAP access. It looks like all mails which correctly got bounced are >64KB while those resulting in zero-sized files are <64KB (there is one >32KB). My first guess would be that maybe for large files, write() fails, while for small ones, close() fails or there is some buffering involved for large files.

3 10

[Dovecot] traffic statistics
by Martin Waschbüsch 28 Jun '13

28 Jun '13

Hi all, Does anyone know a good tool to gather traffic statistics for imap? And what level of logging would I need to set for dovecot to make it happen. Ideally this would be able to filter per domain, too. ;-) Thanks a lot, Martin -- Martin Waschbüsch IT-Dienstleistungen Lautensackstr. 16 80687 München Telefon: +49 89 57005708 Fax: +49 89 57868023 Mobil: +49 170 2189794 martin(a)waschbuesch.de http://martin.waschbuesch.de

4 5

[Dovecot] Released Pigeonhole v0.2.4 for Dovecot v2.0.14
by Stephan Bosch 26 Mar '13

26 Mar '13

Hello Dovecot users, I release a new version of Pigeonhole tonight. This release extends the configuration capabilities of the include and vacation extensions, adds the ihave extension (RFC 5463), and fixes a few small other things. Judging by Timo's plans, this will be one of the last feature releases for Dovecot v2.0, since I'll be switching active development to Dovecot v2.1 once that matures a little more. Changelog v0.2.4: + Vacation extension: finally added support for using the original recipient in vacation address check. It is also possible to disable the recipient address check entirely. Check doc/vacation.txt for configuration information. + Include extension: made limits on the include depth and the total number of included scripts configurable. Check doc/include.txt for configuration information. + Implemented ihave extension. This allows checking for the availability of Sieve language extensions at 'runtime'. Actually, this is checked at compile time. At runtime the interpreter checks whether extensions that were not previously available are still unavailable. If the situation changed, the script is re-compiled and the ihave tests are evaluated again. + Sieve: optimized compilation of tests that yield constant results (i.e. known at compile tme), such as 'true' and 'false'. No code is produced anymore for script sections that are never executed. Also, semantics are not verified anymore in uncompiled script sections. + Made vnd.dovecot.debug extension available to the LDA plugin instead of only the command line tools. + Sieve: redirect action now adds X-Sieve-Redirected-From header (mainly for people using SPF/SRS). - Sieve: fixed bug in handling flags and keywords; in case of error an assertion was triggered. - Script storage: improved handling of unconfigured user home directory. Originally this would produce an unhelpful error message. - Imap4flags extension: prevent forcibly enabling imap4flags when imapflags is enabled. - Fixed various -Wunused-but-set-variable compiler warnings. - Include extension: forgot to check variable identifier syntax for 'global' command. - Sieve: fixed debug mode; no messages were logged in some situations. - sievec tool: forgot to enable -D (debug) parameter. The release is available as follows: http://www.rename-it.nl/dovecot/2.0/dovecot-2.0-pigeonhole-0.2.4.tar.gz http://www.rename-it.nl/dovecot/2.0/dovecot-2.0-pigeonhole-0.2.4.tar.gz.sig Refer to http://pigeonhole.dovecot.org and the Dovecot v2.0 wiki for more information. Have fun testing this new release and don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

2 1

[Dovecot] virtual folder - crash while searching
by Matthias Rieber 10 Mar '13

10 Mar '13

Hi, I've upgraded from dovecot 2.0 to 2.1. When I perform a header search in a virtual folder dovecot crashes. Here's the stacktrace: http://pastebin.com/urSDDzku Regards, Matthias

4 11

[Dovecot] Dovecot: pipe() failed: Too many open files
by Fasil 25 Oct '12

25 Oct '12

Dear all, Thank you all for such a wonderful support. Hats off to all :) Few times I came across imap login issues where new users will not be allowed to login. /var/log/mail.err shows the error below Aug 12 07:57:46 mail dovecot: dovecot: pipe() failed: Too many open files Aug 12 07:57:46 mail dovecot: dovecot: Temporary failure in creating login processes, slowing down for now Aug 12 07:58:46 mail dovecot: dovecot: pipe() failed: Too many open files Aug 12 07:59:46 mail dovecot: dovecot: pipe() failed: Too many open files Aug 12 08:00:46 mail dovecot: dovecot: pipe() failed: Too many open files I have a dovecot (V 1.2.9) +postfix (V 2.7.0) setup on ubuntu 10.04 # ulimit -Hn 1024 # ulimit -Sn 1024 # cat /proc/sys/fs/file-max 1238548 # cat /proc/`pidof dovecot`/limits | grep 'Max open' Max open files 1024 1024 files Please advice how to get rid off this. Fasil.

3 4

[Dovecot] Dovecot sieve and duplicate email subjects
by Benjamin Thomas 17 Oct '12

17 Oct '12

Hi, I'm running a small email server with the help of iRedMail. I can manage sieve scripts from the Rouncube web interface or manually inside the user's personal sieve folder. I have an email account setup to receive automated tasks. Some of these "alerts" occur too often and they have the same subject line, but different senders. This is the rule I am currently using: ##CODE START## # rule:[AutoAlerts] if anyof ( header :matches "Subject" "AutoAlert Type1*", header :matches "Subject" "AutoAlert Type2*", header :matches "Subject" "AutoAlert Type3*" ) { fileinto "INBOX.AutoAlerts"; stop; } ##CODE END## I was wondering if it's possible to gracefully handle duplicate subjects lines (within a given time frame) with sieve filters ? Ideally, I would like the first email of the day with subject ""AutoAlert Type1..." to get moved to the subfolder given above. Subsequent "duplicate" emails would then go into a "duplicate" subfolder. Is this possible with sieve filters ? I could not find anything striking me as obvious while reading the page http://wiki.dovecot.org/LDA/Sieve. Thanks very much for your input.

2 3

[Dovecot] doveadm purge -A via doveadm-proxy director fails after some users
by Daniel Parthey 06 Oct '12

06 Oct '12

Hi, we have configured userdb and passdb in the director and try to iterate all users and pass the "purge" command via doveadm proxy to port 19000 on the correct director backend host. A single purge -u username(a)example.org via doveadm-proxy works correctly, but iterating over some users with -A fails. Note: users/domains have been anonymized in output: ------------------------------------------------------------------------ mail04:~# /usr/bin/doveadm -c /etc/dovecot-director/dovecot-director.conf -D purge -A 2>&1 doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules/doveadm doveadm(root): Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_acl_plugin.so: undefined symbol: acl_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_lookup (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_quota_plugin.so: undefined symbol: quota_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_zlib_plugin.so: undefined symbol: i_stream_create_deflate (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_list_backend (this is usually intentional, so just ignore this message) doveadm(user01(a)domain1.example.org): Debug: auth input: user=user01(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user02(a)domain1.example.org): Debug: auth input: user=user02(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user03(a)domain1.example.org): Debug: auth input: user=user03(a)domain1.example.org proxy host=10.129.3.192 proxy_refresh=86400 doveadm(user04(a)domain1.example.org): Debug: auth input: user=user04(a)domain1.example.org proxy host=10.129.3.192 proxy_refresh=86400 doveadm(user05(a)domain1.example.org): Debug: auth input: user=user05(a)domain1.example.org proxy host=10.129.3.190 proxy_refresh=86400 doveadm(user06(a)domain1.example.org): Debug: auth input: user=user06(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user07(a)domain1.example.org): Debug: auth input: user=user07(a)domain1.example.org proxy host=10.129.3.190 proxy_refresh=86400 doveadm(user08(a)domain1.example.org): Debug: auth input: user=user08(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user01(a)domain2.example.org): Debug: auth input: user=user01(a)domain2.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user09(a)domain1.example.org): Debug: auth input: user=user09(a)domain1.example.org proxy host=10.129.3.190 proxy_refresh=86400 10 / 94doveadm(user10(a)domain1.example.org): Debug: auth input: user=user10(a)domain1.example.org proxy host=10.129.3.190 proxy_refresh=86400 doveadm(user11(a)domain1.example.org): Debug: auth input: user=user11(a)domain1.example.org proxy host=10.129.3.191 proxy_refresh=86400 doveadm(user12(a)domain1.example.org): Debug: auth input: user=user12(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user13(a)domain1.example.org): Debug: auth input: user=user13(a)domain1.example.org proxy host=10.129.3.190 proxy_refresh=86400 doveadm(user14(a)domain1.example.org): Debug: auth input: user=user14(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user15(a)domain1.example.org): Debug: auth input: user=user15(a)domain1.example.org proxy host=10.129.3.191 proxy_refresh=86400 doveadm(user16(a)domain1.example.org): Debug: auth input: user=user16(a)domain1.example.org proxy host=10.129.3.191 proxy_refresh=86400 doveadm(user17(a)domain1.example.org): Debug: auth input: user=user17(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user18(a)domain1.example.org): Debug: auth input: user=user18(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user19(a)domain1.example.org): Debug: auth input: user=user19(a)domain1.example.org proxy host=10.129.3.192 proxy_refresh=86400 20 / 94doveadm(user20(a)domain1.example.org): Debug: auth input: user=user20(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user21(a)domain1.example.org): Debug: auth input: user=user21(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user22(a)domain1.example.org): Debug: auth input: user=user22(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user02(a)domain2.example.org): Debug: auth input: user=user02(a)domain2.example.org proxy host=10.129.3.190 proxy_refresh=86400 doveadm(user23(a)domain1.example.org): Debug: auth input: user=user23(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user24(a)domain1.example.org): Debug: auth input: user=user24(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user01(a)domain3.example.org): Debug: auth input: user=user01(a)domain3.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user25(a)domain1.example.org): Debug: auth input: user=user25(a)domain1.example.org proxy host=10.129.3.192 proxy_refresh=86400 doveadm(user26(a)domain1.example.org): Debug: auth input: user=user26(a)domain1.example.org proxy host=10.129.3.191 proxy_refresh=86400 doveadm(user27(a)domain1.example.org): Debug: auth input: user=user27(a)domain1.example.org proxy host=10.129.3.190 proxy_refresh=86400 30 / 94doveadm(user28(a)domain1.example.org): Debug: auth input: user=user28(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user29(a)domain1.example.org): Debug: auth input: user=user29(a)domain1.example.org proxy host=10.129.3.191 proxy_refresh=86400 doveadm(user30(a)domain1.example.org): Debug: auth input: user=user30(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user31(a)domain1.example.org): Debug: auth input: user=user31(a)domain1.example.org proxy host=10.129.3.193 proxy_refresh=86400 doveadm(user31(a)domain1.example.org): Error: doveadm server failure doveadm: Error: Failed to iterate through some users ------------------------------------------------------------------------ The user "user31(a)domain1.example.org" is proxied to the correct backend host according to director status, but the dovecot.log on the doveadm service backend host shows the following error: Jun 29 15:40:31 10.129.3.249 dovecot: doveadm(user31(a)domain1.example.org): Error: user user31(a)domain1.example.org: Error reading configuration: net_connect_unix(/var/run/dovecot/config) failed: Permission denied Jun 29 15:40:31 10.129.3.249 dovecot: doveadm(user31(a)domain1.example.org): Error: purge: User lookup failed: Internal error occurred. Refer to server log for more information. The wiki http://wiki2.dovecot.org/Services#doveadm states that the privileges are (temporarily) dropped to the mail user's privileges after userdb lookup. It seems that from the second purge on which is passed over a single doveadm connection, the user lookup fails. It also seems a bit strange, that the "-A" parameter can be observed in the doveadm tcp stream to the backend, since iteration should be already done in the director and the backend should purge only a single user: D username(a)example.org purge -A Is there a bug or have I misconfigured/overlooked something? Configs of mailbox backend and director are attached. Kind regards Daniel

2 8