July 2013 - dovecot - dovecot.org

[Dovecot] "Renaming not supported across conflicting directory permissions"
by Richard Platel 25 Oct '13

25 Oct '13

Is it possible to disable this check in 2.1.7? (without a patch and re-compile?)

3 2

[Dovecot] dovecot-metadata-plugin v14 patches
by Sergey Sidlyarenko 19 Oct '13

19 Oct '13

Please apply patches for dovecot-metadata-plugin v14. 1. dovecot-metadata-plugin-value_nil - fix plugin crach if entry->value == NULL (strlen(NULL) - segfault). 2. dovecot-metadata-plugin-utf7_support - add support metadata for UTF8 mailfolder. -- Sidlyarenko Sergey https://github.com/lefoyer

2 1

[Dovecot] Expunged message reappeared, giving a new UID
by Simon Fraser 23 Sep '13

23 Sep '13

I am running dovecot 2.2.2 with tcp based replication, and experiencing some duplicated emails. `doveconf -n` output is below. I have narrowed it down to the following scenario: An email arrives, and is successfully replicated to both nodes. It is in INBOX/new/ at this point on both servers. Connect with a mail client, and delete the message - without delayed expunge. So, for example, mutt (press 'd' then '$' to sync the mailbox), or Evolution set to immediately delete. The following log entry appears on the server the client is connected to: Jul 26 10:40:55 intmail3a dovecot: imap(srf): Warning: /mail/spool/s/srf/mail/INBOX/dovecot-uidlist: Duplicate file entry at line 5: 1374831638.M830754P11591.intmail3a,S=1289,W=1321 (uid 733481 -> 733482) - retrying by re-reading from beginning Jul 26 10:40:55 intmail3a dovecot: imap(srf): Warning: Maildir /mail/spool/s/srf/mail/INBOX: Expunged message reappeared, giving a new UID (old uid=733481, file=1374831638.M830754P11591.intmail3a,S=1289,W=1321) The email reappears in the mailbox, although this time it is in INBOX/new on one node and INBOX/cur on the other. As best I can tell it's always in 'new' on the server the client was connected to and in 'cur' on the other. If any other mailbox operation occurs before the delete (Marking the message in question as 'read', receiving a new message into the mailbox in a different lmtp session, marking as read or deleting & expunging some other message) then this prevents the duplication from happening. What can I do to prevent this happening? Is there a synchronisation interval I can adjust, perhaps? Although the message does get synchronised initially. Thanks in advance, Simon. # 2.2.2: /mail/etc/dovecot/dovecot.conf # OS: Linux 3.5.0-23-generic x86_64 Ubuntu 12.04.2 LTS disable_plaintext_auth = no doveadm_password = secret first_valid_uid = 100 lda_mailbox_autocreate = yes mail_gid = dovecot mail_home = /mail/spool/%1n/%n mail_location = maildir:~/mail:INBOX=~/mail/INBOX mail_plugins = notify replication mail_uid = dovecot managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = . } passdb { args = /mail/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_replica = tcps:intmail3b:12345 sieve_dir = ~/sieve } protocols = imap lmtp sieve service aggregator { fifo_listener replication-notify-fifo { mode = 0600 user = dovecot } unix_listener replication-notify { mode = 0600 user = dovecot } } service config { unix_listener config { user = dovecot } } service doveadm { inet_listener { port = 12345 ssl = yes } user = dovecot } service replicator { process_min_avail = 1 } ssl_cert = </mail/etc/certs/mail-cert.pem ssl_client_ca_dir = /etc/ssl/certs ssl_key = </mail/etc/certs/mail-key.pem userdb { args = /mail/etc/dovecot/dovecot-ldap.userdb.conf.ext driver = ldap } protocol lmtp { mail_plugins = notify replication sieve } protocol lda { mail_plugins = notify replication sieve } protocol imap { mail_max_userip_connections = 30 } -- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.

8 30

[Dovecot] pop3c migration?
by Gedalya 22 Sep '13

22 Sep '13

Hi, I'm running dsync migrations using imapc and the source IMAP server is just too slow. It has taken 8 hours to migrate a mailbox with 47,000 messages. It seems most of the mailboxes are never accessed with IMAP, so it would be just as good to migrate them via POP3 which should work faster in my case. Is this actually meant to work? doveadm -D -o pop3c_user=xxxxxx(a)example.com -o 'pop3c_password=*******' -o pop3c_host=120.121.122.123 backup -u yyyyy(a)example.com -R pop3c: gives: doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_listescape_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules/doveadm doveadm(root): Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_acl_plugin.so: undefined symbol: acl_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_init (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_quota_plugin.so: undefined symbol: quota_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_zlib_plugin.so: undefined symbol: i_stream_create_deflate (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_list_backend (this is usually intentional, so just ignore this message) doveadm(yyyyy(a)example.com): Debug: Added userdb setting: mail=maildir:/stor/real/domains/example.com/yy/yyyyy/Maildir doveadm(yyyyy(a)example.com): Debug: Added userdb setting: plugin/quota_rule=*:storage=5120M doveadm(yyyyy(a)example.com): Debug: Effective uid=1001, gid=1001, home=/stor/real/domains/example.com/yy/yyyyy doveadm(yyyyy(a)example.com): Debug: Namespace : type=private, prefix=POP3-MIGRATION-NS/, sep=, inbox=no, hidden=yes, list=no, subscriptions=yes location=pop3c: doveadm(yyyyy(a)example.com): Debug: fs: root=, index=, control=, inbox=, alt= doveadm(yyyyy(a)example.com): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/stor/real/domains/example.com/yy/yyyyy/Maildir doveadm(yyyyy(a)example.com): Debug: maildir++: root=/stor/real/domains/example.com/yy/yyyyy/Maildir, index=, control=, inbox=/stor/real/domains/example.com/yy/yyyyy/Maildir, alt= dsync(yyyyy(a)example.com): Debug: Effective uid=1001, gid=1001, home=/stor/real/domains/example.com/yy/yyyyy dsync(yyyyy(a)example.com): Debug: Namespace : type=private, prefix=POP3-MIGRATION-NS/, sep=, inbox=no, hidden=yes, list=no, subscriptions=yes location=pop3c: dsync(yyyyy(a)example.com): Debug: fs: root=, index=, control=, inbox=, alt= dsync(yyyyy(a)example.com): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=pop3c: dsync(yyyyy(a)example.com): Debug: fs: root=, index=, control=, inbox=, alt= Segmentation fault remembering something about that... : # mkdir /tmp/pop3c # chown vmail:vmail /tmp/pop3c/ # doveadm -D -o pop3c_user=xxxxxx(a)example.com -o 'pop3c_password=*******' -o pop3c_host=120.121.122.123 backup -u yyyyy(a)example.com -R pop3c:/tmp/pop3c doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_listescape_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules/doveadm doveadm(root): Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_acl_plugin.so: undefined symbol: acl_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_init (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_quota_plugin.so: undefined symbol: quota_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_zlib_plugin.so: undefined symbol: i_stream_create_deflate (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_list_backend (this is usually intentional, so just ignore this message) doveadm(yyyyy(a)example.com): Debug: Added userdb setting: mail=maildir:/stor/real/domains/example.com/yy/yyyyy/Maildir doveadm(yyyyy(a)example.com): Debug: Added userdb setting: plugin/quota_rule=*:storage=5120M doveadm(yyyyy(a)example.com): Debug: Effective uid=1001, gid=1001, home=/stor/real/domains/example.com/yy/yyyyy doveadm(yyyyy(a)example.com): Debug: Namespace : type=private, prefix=POP3-MIGRATION-NS/, sep=, inbox=no, hidden=yes, list=no, subscriptions=yes location=pop3c: doveadm(yyyyy(a)example.com): Debug: fs: root=, index=, control=, inbox=, alt= doveadm(yyyyy(a)example.com): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/stor/real/domains/example.com/yy/yyyyy/Maildir doveadm(yyyyy(a)example.com): Debug: maildir++: root=/stor/real/domains/example.com/yy/yyyyy/Maildir, index=, control=, inbox=/stor/real/domains/example.com/yy/yyyyy/Maildir, alt= dsync(yyyyy(a)example.com): Debug: Effective uid=1001, gid=1001, home=/stor/real/domains/example.com/yy/yyyyy dsync(yyyyy(a)example.com): Debug: Namespace : type=private, prefix=POP3-MIGRATION-NS/, sep=, inbox=no, hidden=yes, list=no, subscriptions=yes location=pop3c: dsync(yyyyy(a)example.com): Debug: fs: root=, index=, control=, inbox=, alt= dsync(yyyyy(a)example.com): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=pop3c:/tmp/pop3c dsync(yyyyy(a)example.com): Debug: fs: root=/tmp/pop3c/., index=/tmp/pop3c, control=, inbox=, alt= dsync(yyyyy(a)example.com): Debug: Namespace : Using permissions from /tmp/pop3c/.: mode=0755 gid=-1 dsync(yyyyy(a)example.com): Debug: Namespace : Using permissions from /stor/real/domains/example.com/yy/yyyyy/Maildir: mode=0700 gid=-1 dsync(yyyyy(a)example.com): Debug: Namespace : /tmp/pop3c/./INBOX doesn't exist yet, using default permissions dsync(yyyyy(a)example.com): Debug: Namespace : Using permissions from /tmp/pop3c/.: mode=0755 gid=-1 dsync(yyyyy(a)example.com): Debug: pop3c(120.121.122.123): Looking up IP address dsync(yyyyy(a)example.com): Debug: pop3c(120.121.122.123): Connecting to 120.121.122.123:110 dsync(yyyyy(a)example.com): Debug: pop3c(120.121.122.123): Authenticating as xxxxxx(a)example.com dsync(yyyyy(a)example.com): Panic: file mail-storage.c: line 1311 (mailbox_get_metadata): assertion failed: ((items & MAILBOX_METADATA_GUID) == 0 || !guid_128_is_empty(metadata_r->guid)) dsync(yyyyy(a)example.com): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x45caa) [0xb761ccaa] -> /usr/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x47) [0xb761cdc7] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0xb761d647] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_get_metadata+0x120) [0xb76f3040] -> doveadm() [0x80740bc] -> doveadm(dsync_worker_mailbox_iter_next+0x21) [0x8071c11] -> doveadm() [0x806c1f7] -> doveadm(dsync_brain_sync+0x6c0) [0x806b890] -> doveadm(dsync_brain_sync_all+0x18) [0x806c4f8] -> doveadm() [0x806961b] -> doveadm() [0x8069bbf] -> doveadm() [0x80541ec] -> doveadm(doveadm_mail_try_run+0x257) [0x8054ee7] -> doveadm(main+0x391) [0x805d0c1] -> /lib/i386-linux-gnu/i686/cmov/libc.so.6(__libc_start_main+0xe6) [0xb748ae46] -> doveadm() [0x8054001] Aborted Now I'm lost... Am I in the right direction? Thanks, Gedalya # dovecot -n # 2.1.17: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-686-pae i686 Debian 7.1 auth_default_realm = example.com auth_mechanisms = plain login cram-md5 auth_verbose = yes auth_verbose_passwords = plain default_client_limit = 8096 dict { expire = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no imapc_host = mail01.example.com mail_gid = vmail mail_plugins = listescape mail_prefetch_count = 50 mail_uid = vmail namespace { hidden = yes list = no location = pop3c: prefix = POP3-MIGRATION-NS/ } namespace inbox { inbox = yes location = prefix = separator = / type = private } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { expire = Trash expire2 = Trash.* expire3 = Junk expire_dict = proxy::expire pop3_migration_mailbox = POP3-MIGRATION-NS/INBOX sieve = ~/.dovecot.sieve sieve_before = /var/local/lib/dovecot/sieve/global/fileinto-spam.sieve sieve_dir = ~/sieve } pop3c_host = 120.121.122.123 postmaster_address = postmaster(a)example.com service auth-worker { user = $default_internal_user } service auth { client_limit = 20480 } service dict { unix_listener dict { mode = 0600 user = vmail } } service imap-login { process_min_avail = 4 service_count = 0 vsz_limit = 128 M } service imap { process_limit = 10240 } service lmtp { inet_listener lmtp { address = 0.0.0.0 port = 7025 } } service pop3-login { process_min_avail = 4 service_count = 0 vsz_limit = 128 M } service pop3 { process_limit = 4096 } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol doveadm { mail_plugins = listescape pop3_migration } protocol lmtp { mail_plugins = listescape sieve } protocol imap { mail_max_userip_connections = 25 mail_plugins = listescape imap_quota ssl_cert = </etc/dovecot/imap.example.com.crt ssl_key = </etc/dovecot/imap.example.com.key } protocol pop3 { mail_max_userip_connections = 10 mail_plugins = listescape pop3_fast_size_lookups = yes pop3_no_flag_updates = yes pop3_reuse_xuidl = no pop3_save_uidl = yes pop3_uidl_format = %08Xu%08Xv ssl_cert = </etc/dovecot/pop.example.com.crt ssl_key = </etc/dovecot/pop.example.com.key } /etc/dovecot/dovecot-sql.conf.ext : driver = mysql connect = ..... default_pass_scheme = PLAIN password_query = SELECT password, \ '/stor/real/domains/%d/%2n/%n' AS userdb_home, \ 'maildir:/stor/real/domains/%d/%2n/%n/Maildir' as userdb_mail, \ concat('*:storage=', quota_mb, 'M') as userdb_quota_rule, \ 'vmail' AS userdb_uid, 'vmail' AS userdb_gid \ FROM email WHERE userid = '%n' AND domain = '%d' and deleted=0 user_query = SELECT '/stor/real/domains/%d/%2n/%n' AS home, \ 'maildir:/stor/real/domains/%d/%2n/%n/Maildir' as mail, \ concat('*:storage=', quota_mb, 'M') as quota_rule, \ 'vmail' AS uid, 'vmail' AS gid \ FROM email WHERE userid = '%n' AND domain = '%d' and deleted=0 iterate_query = SELECT userid as user, domain FROM email where deleted=0

2 2

[Dovecot] Dovecot never release preallocated space in mdbox
by Stéphane BERTHELOT 22 Sep '13

22 Sep '13

Hello everyone, I am currently evaluating dovecot for our new email production servers (20k+ mailboxes) and found out something strange. I'm using those settings on Dovecot 2.2.4 (x86_64 / Slackware / compiled from sources) mdbox_rotate_size = 128M mdbox_rotate_interval = 1d mdbox_preallocate_space = yes with virtual users and location like : mail_location = mdbox:~/mdbox I don't think the remaining config is relevant but ask me if you need some other parts. Using test accounts for 2 weeks now I've figured that the 128M preallocated space is never 'hole punched" (to use a similar term than "man fallocate" on Linux), even when rotating m.* files. From what I understand those files will never be appended again because of the mdbox_rotate_interval. Then doveadm purge creates new files so old ones would never grow again. Here is an example of a mdbox storage using ls -ls (which shows allocated VS used space) total 4065176 1884 -rw------- 1 mail mail 1926656 Jul 29 10:55 dovecot.map.index 4 -rw------- 1 mail mail 460 Jul 29 11:26 dovecot.map.index.log 48 -rw------- 1 mail mail 44304 Jul 29 10:55 dovecot.map.index.log.2 131072 -rw------- 1 mail mail 133165066 Jul 19 15:31 m.10 131072 -rw------- 1 mail mail 133507393 Jul 19 15:32 m.13 131072 -rw------- 1 mail mail 134155182 Jul 19 15:33 m.14 131072 -rw------- 1 mail mail 134213403 Jul 19 15:30 m.2 131072 -rw------- 1 mail mail 46464 Jul 21 04:30 m.21 131072 -rw------- 1 mail mail 134215030 Jul 19 15:30 m.3 131072 -rw------- 1 mail mail 25852 Jul 25 01:54 m.32 131072 -rw------- 1 mail mail 2360 Jul 26 00:05 m.34 131072 -rw------- 1 mail mail 169073 Jul 27 23:18 m.35 131072 -rw------- 1 mail mail 31624 Jul 27 01:55 m.36 131072 -rw------- 1 mail mail 134216982 Jul 28 04:30 m.37 131076 -rw------- 1 mail mail 134217804 Jul 28 04:30 m.38 131072 -rw------- 1 mail mail 134217341 Jul 28 04:30 m.39 131072 -rw------- 1 mail mail 134213719 Jul 19 15:30 m.4 131072 -rw------- 1 mail mail 29740970 Jul 28 04:30 m.40 131072 -rw------- 1 mail mail 129175917 Jul 28 04:30 m.41 131072 -rw------- 1 mail mail 133174937 Jul 28 04:30 m.42 131072 -rw------- 1 mail mail 633436 Jul 28 04:30 m.43 131072 -rw------- 1 mail mail 3154623 Jul 28 04:30 m.44 131072 -rw------- 1 mail mail 3676879 Jul 28 04:30 m.45 131072 -rw------- 1 mail mail 468158 Jul 28 04:30 m.46 131072 -rw------- 1 mail mail 26964 Jul 28 04:30 m.47 131072 -rw------- 1 mail mail 3574599 Jul 28 04:30 m.48 131072 -rw------- 1 mail mail 3789133 Jul 28 04:30 m.49 131072 -rw------- 1 mail mail 134215016 Jul 19 15:30 m.5 131072 -rw------- 1 mail mail 1280074 Jul 28 04:30 m.50 131076 -rw------- 1 mail mail 635459 Jul 28 22:47 m.51 131072 -rw------- 1 mail mail 1459418 Jul 29 10:55 m.52 131072 -rw------- 1 mail mail 132941013 Jul 29 11:26 m.53 131072 -rw------- 1 mail mail 134213475 Jul 19 15:30 m.7 131072 -rw------- 1 mail mail 132240074 Jul 19 15:31 m.9 There's a lot of "lost" space since preallocated space would only be reclaimed when *all* emails in m.X file have refcount=0 and after a doveadm purge call, if I read well the dovecot docs. On mailboxes patterns with low incoming mail (< 100kb / day) this would waste much space. Of course I can decrease rotate size a lot but it would then produce a lot of files and would certainly become similar performance-wise to sdbox/maildir/... There would certainly be smart to use something similar to "FALLOC_FL_PUNCH_HOLE" on rotation (when doing close() ?) so that when we're sure there won't be anymore data appended to file that the allocated space == used space. I will disable space preallocation for our next tests since it wastes much storage for us ; did you have any feedback on how much it may affect performance ? I found in this ML archives some messages about the implementation but didn't see anyone clearly stating how much better preallocation is. Thanks, best regards, Stephane Berthelot.

4 5

[Dovecot] INBOX protected foldername?
by Hajo Locke 22 Sep '13

22 Sep '13

Hello, have a little problem with folders with name INBOX created by Users. Some Clients use a Prefix for their Folders. In our old setup (dovecot 1.2) it was possible to create a Folder INBOX in mbox-space with some Subfolders. These Subfolders of INBOX showed up in Mailclient at toplevel. Now we updatet to 2.1.7. In higher dovecot versions INBOX seems to be a kind of protected foldername. dovecot is not offering this folder in folderlist. If i rename it, the folder is available again. There are only a few users, so i could fix this manually. But how to explain this? I did not find a setting etc. which could explain this behaviour. Our Config is pretty standard: mail_location is unchanged some dovecot versions we use: mail_location = mbox:~/mail:INBOX=/var/mail/%u most of conf is out of the box and also used in older versions. only new is namespace inbox, but should also be default: namespace inbox { inbox = yes } Is there an explaination for this behaviour? Thanks, Hajo

4 10

[Dovecot] . (dot) in maildir folder names
by Christoph Anton Mitterer 21 Sep '13

21 Sep '13

Hi. Uhm... yeah as the topic implies I want to have . (dots) in my folder names... Unfortunately dovecot's maildirmake hasn't a -f switch as the one from courier/maildrop, but that one in turn is buggy[0] and doesn't encode any characters at all. In principle, maildir++ should allow[1] having (encoded) dots in folder names,... but I don't quite understand how the encoding actually works, cause UTF-7 seems to be already the encoded (without padding and such)... but . is . in UTF-7 as well. Does dovecot support this? At least my mail clients (well I only tried Evolution so far which sucks in so many areas)... couldn't create it... but I guess it's rather a stupid client issue. Anyone knows how it would be encoded? Interestingly, and this might be actually an inssue in doveocot when I create maildirs with non-ASCII chars without encoding these, e.g. maildir/.München/ (instead of the correctly encoded (.M&APw-nchen) Dovecot seems to "export" these to the clients,... at least Evolution shows it in the list of subscribable folders (even correctly as "München")... but it doesn't allow me to actually subscribe to it. Cheers & thx, Chris. [0] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=709555 [1] http://www.courier-mta.org/maildir.html#id351803

5 24

[Dovecot] dovecot v-2.0, postfix+mysql configuration issue.
by Vimuth 20 Sep '13

20 Sep '13

Greetings Gentlemen, Im in the attempt of configuring a postfix mail server on RHEL6.2 with the said components in the subject. I followed a couple of guides and I beleive that Im almost there, but I get the following error when I try to send a mail to a user who is in the mysql database as follows, Dovecot version that is being used is 2.0.X. echo test | mail vimuth(a)mydomain.rock [root@box1 ~]# tail -f /var/log/maillog Mar 26 07:00:44 box1 dovecot: auth: Error: sql(vimuth(a)mydomain.rock): User query failed: Table 'mailserver.users' doesn't exist (using built-in default user_query: SELECT home, uid, gid FROM users WHERE username = '%n' AND domain = '%d') Mar 26 07:00:44 box1 dovecot: lda: Error: user vimuth(a)mydomain.rock: Auth USER lookup failed Mar 26 07:00:44 box1 dovecot: lda: Fatal: Internal error occurred. Refer to server log for more information. Mar 26 07:00:44 box1 postfix/pipe[6291]: A9E0E23B96: to=<vimuth(a)mydomain.rock>, relay=dovecot, delay=14255, delays=14255/0.02/0/0.12, dsn=4.3.0, status=deferred (temporary failure) Mar 26 07:05:44 box1 postfix/qmgr[5675]: 2E5AD23B66: from=<root(a)box1.mydomain.rock>, size=421, nrcpt=1 (queue active) Mar 26 07:05:44 box1 dovecot: auth: Error: mysql: Query failed, retrying: Table 'mailserver.users' doesn't exist Mar 26 07:05:44 box1 dovecot: auth: Error: sql(vimuth(a)mydomain.rock): User query failed: Table 'mailserver.users' doesn't exist (using built-in default user_query: SELECT home, uid, gid FROM users WHERE username = '%n' AND domain = '%d') Mar 26 07:05:44 box1 dovecot: lda: Error: user vimuth(a)mydomain.rock: Auth USER lookup failed Mar 26 07:05:44 box1 dovecot: lda: Fatal: Internal error occurred. Refer to server log for more information. Mar 26 07:05:44 box1 postfix/pipe[6312]: 2E5AD23B66: to=<vimuth(a)mydomain.rock>, relay=dovecot, delay=16007, delays=16007/0.03/0/0.08, dsn=4.3.0, status=deferred (temporary failure) As I understand, this has something to do with the way I have setup my database. Im gonna post what are in my most important configuration files and also of course in the database. here's *"/etc/dovecot/dovecot-sql.conf.ext"* driver = mysql connect = host=127.0.0.1 dbname=mailserver user=mailuser password=redhat default_pass_scheme = MD5 password_query = SELECT email as user, password FROM virtual_users WHERE email='%u'; here's */etc/postfix/main.cf* # TLS parameters smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_key_file = /etc/pki/tls/private/smtpd.key smtpd_tls_cert_file = /etc/pki/tls/smtpd.crt smtpd_tls_CAfile = /etc/pki/tls/certs/cacert.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom # set smtpd restrictions smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination</pre> virtual_mailbox_domains = mysql:/etc/postfix/ mysql-virtual-mailbox-domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf mailbox_command = /usr/libexec/dovecot/deliver mailbox_transport = dovecot virtual_transport = dovecot dovecot_destination_recipient_limit = 1 Now to the *database * mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | mail | | mailserver | | mysql | +--------------------+[ mysql> use mailserver; Database changed mysql> select * from mailserver; mysql> show tables; +----------------------+ | Tables_in_mailserver | +----------------------+ | virtual_aliases | | virtual_domains | | virtual_users | +----------------------+ mysql> select * from virtual_users; +----+-----------+----------------------------------+----------------------+ | id | domain_id | password | email | +----+-----------+----------------------------------+----------------------+ | 1 | 1 | e2798af12a7a0f4f70b4d69efbc25f4d | vimuth(a)mydomain.rock | +----+-----------+----------------------------------+----------------------+ 1 row in set (0.00 sec) Please can someone help. If you need more information please let me know. I'm ready to tear down the entire implementation and start from the scratch. Many thanks in advance. /Vimuth

5 5

[Dovecot] Unable to use dovecot-antispam plugin
by Xavier Claude 14 Sep '13

14 Sep '13

Hello everybody, I'm trying to use the Dovecot antispam on Debian Wheezy (dovecot version 2.1.7), but it's not working, each time I put a mail in the "Spam" folder, it is send in its original folder. What bother me the most is that I don't see anything in the log. Here is my dovecot config related to the antispam plugin : plugin { antispam_allow_append_to_spam = yes antispam_backend = dspam antispam_debug_target = syslog antispam_dspam_args = --user;%Lu;--deliver=spam,innocent;--source=error;--signature=%%s antispam_dspam_binary = /usr/bin/dspam antispam_dspam_notspam = --class=innocent antispam_dspam_result_header = X-DSPAM-Result antispam_dspam_spam = --class=spam antispam_signature = X-DSPAM-Signature antispam_signature_missing = error antispam_spam = SPAM;Spam antispam_trash = trash;Trash;Deleted Items; Deleted Messages sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocol imap { mail_plugins = " antispam" } And in the log, the only thing I see is the plugin initialization : Jul 27 13:18:05 twoflowers imap: antispam: plugin initialising (2.0-notgit) Jul 27 13:18:05 twoflowers imap: antispam: "SPAM" is exact match spam folder Jul 27 13:18:05 twoflowers imap: antispam: "Spam" is exact match spam folder Jul 27 13:18:05 twoflowers imap: antispam: no unsure folders Jul 27 13:18:05 twoflowers imap: antispam: "trash" is exact match trash folder Jul 27 13:18:05 twoflowers imap: antispam: "Trash" is exact match trash folder Jul 27 13:18:05 twoflowers imap: antispam: "Deleted Items" is exact match trash folder Jul 27 13:18:05 twoflowers imap: antispam: " Deleted Messages" is exact match trash folder Jul 27 13:18:05 twoflowers imap: antispam: allowing APPEND to spam folders Jul 27 13:18:05 twoflowers imap: antispam: dspam binary set to /usr/bin/dspam Jul 27 13:18:05 twoflowers imap: antispam: dspam result set to X-DSPAM-Result Jul 27 13:18:05 twoflowers imap: antispam: dspam extra arg --user Jul 27 13:18:05 twoflowers imap: antispam: dspam extra arg xavier Jul 27 13:18:05 twoflowers imap: antispam: dspam extra arg --deliver=spam,innocent Jul 27 13:18:05 twoflowers imap: antispam: dspam extra arg --source=error Jul 27 13:18:05 twoflowers imap: antispam: dspam extra arg --signature=%s Jul 27 13:18:05 twoflowers imap: antispam: signature header line is "X-DSPAM-Signature" Thank you for your help. -- Xavier Claude claude.xavier(a)gmail.com

2 5

[Dovecot] 2.2.4 + metadata plugin: autoconf failed
by Andreas Schulze 12 Sep '13

12 Sep '13

Hello, (had disabled maildelivery for the list, so I can't reply) I changed the minimal version from 2.65 to 2.59 then I run ./autogen.sh && ./configure --foo ... sles9: (autoconf-2.59) ---------------------- + cd dovecot-metadata-plugin-2a17386d4dbc + ./autogen.sh + creating m4/ ... + running autoreconf ... configure.ac:13: error: possibly undefined macro: AC_PROG_CC_C99 If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. autoreconf: /usr/bin/autoconf failed with exit status: 1 sles10: (autoconf-2.59) ----------------------- + cd dovecot-metadata-plugin-2a17386d4dbc + ./autogen.sh + creating m4/ ... + running autoreconf ... configure.ac:13: error: possibly undefined macro: AC_PROG_CC_C99 If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. autoreconf: /usr/bin/autoconf failed with exit status: 1 sles11: (autoconf-2.63) ----------------------- + cd dovecot-metadata-plugin-2a17386d4dbc + ./autogen.sh + creating m4/ ... + running autoreconf ... libtoolize: putting auxiliary files in `.'. libtoolize: copying file `./ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. libtoolize: copying file `m4/libtool.m4' libtoolize: copying file `m4/ltoptions.m4' libtoolize: copying file `m4/ltsugar.m4' libtoolize: copying file `m4/ltversion.m4' libtoolize: copying file `m4/lt~obsolete.m4' configure.ac:7: installing `./config.guess' configure.ac:7: installing `./config.sub' configure.ac:4: installing `./install-sh' configure.ac:4: installing `./missing' src/Makefile.am:33: DOVECOT_PLUGIN_DEPS does not appear in AM_CONDITIONAL src/Makefile.am:41: DOVECOT_PLUGIN_DEPS does not appear in AM_CONDITIONAL src/Makefile.am:10: `dovecot_pkglib_LTLIBRARIES' is used but `dovecot_pkglibdir' is undefined src/Makefile.am: installing `./depcomp' src/Makefile.am:13: variable `libdovecot_metadata_la_SOURCES' is defined but no program or src/Makefile.am:13: library has `libdovecot_metadata_la' as canonic name (possible typo) autoreconf: automake failed with exit status: 1 openSUSE_Factory: (autoconf-2.69) --------------------------------- + cd dovecot-metadata-plugin-2a17386d4dbc + ./autogen.sh + creating m4/ ... + running autoreconf ... libtoolize: putting auxiliary files in `.'. libtoolize: copying file `./ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. libtoolize: copying file `m4/libtool.m4' libtoolize: copying file `m4/ltoptions.m4' libtoolize: copying file `m4/ltsugar.m4' libtoolize: copying file `m4/ltversion.m4' libtoolize: copying file `m4/lt~obsolete.m4' configure.ac:7: installing './config.guess' configure.ac:7: installing './config.sub' configure.ac:4: installing './install-sh' configure.ac:4: installing './missing' src/Makefile.am:33: error: DOVECOT_PLUGIN_DEPS does not appear in AM_CONDITIONAL src/Makefile.am:41: error: DOVECOT_PLUGIN_DEPS does not appear in AM_CONDITIONAL src/Makefile.am:10: error: 'dovecot_pkglib_LTLIBRARIES' is used but 'dovecot_pkglibdir' is undefined src/Makefile.am: installing './depcomp' src/Makefile.am:13: warning: variable 'libdovecot_metadata_la_SOURCES' is defined but no program or src/Makefile.am:13: library has 'libdovecot_metadata_la' as canonical name (possible typo) autoreconf: automake failed with exit status: 1 -- Andreas Schulze Internetdienste | P252 DATEV eG 90329 Nürnberg | Telefon +49 911 319-0 | Telefax +49 911 319-3196 E-Mail info @datev.de | Internet www.datev.de Sitz: 90429 Nürnberg, Paumgartnerstr. 6-14 | Registergericht Nürnberg, GenReg Nr.70 Vorstand Prof. Dieter Kempf (Vorsitzender) Dipl.-Kfm. Wolfgang Stegmann (stellvertretender Vorsitzender) Dipl.-Kfm. Michael Leistenschneider Dipl.-Kfm. Dr. Robert Mayr Jörg Rabe v. Pappenheim Dipl.-Vw. Eckhard Schwarzer Vorsitzender des Aufsichtsrates: Reinhard Verholen

1 1