September 2016 - dovecot

FreeBSD port
by The Doctor 28 Sep '16

28 Sep '16

Is the person responsible for the FreeBSD port on this list? There might be a minor bug in a small piece of correction code issues in the last 4 days. -- Member - Liberal International This is doctor@@nl2k.ab.ca Ici doctor@@nl2k.ab.ca God,Queen and country!Never Satan President Republic!Beware AntiChrist rising! http://www.fullyfollow.me/rootnl2k Look at Psalms 14 and 53 on Atheism Time for the USA to hold a referendum on its republic and vote to dissolve!!

4 4

Dovecot Pro Community Edition
by Markus Petzsch 28 Sep '16

28 Sep '16

Hi, I'm trying to setup push notifications for Open-Xchange (OX) and struggle with finding the push_notification plugin. According to https://oxpedia.org/wiki/index.php?title=AppSuite:OX_Mail#Requirements it should be found in the Dovecot Pro Community Edition. I'm currently running dovecot that came with CentOS 7.2 but am intrested in OX's push feature. Can someone point me in the right direction where to find the community edition repos? https://oxpedia.org/wiki/index.php?title=Dovecot:Main_Page_Dovecot#dovecotq… only lists password protected repos. Thx for your help in advance. Best Regards Markus Petzsch

2 1

Trying to regain access to my email archive after an upgrade.
by Rick Jones 27 Sep '16

27 Sep '16

Hi - I had been running an Ubuntu 12.04 system on which I receive email, with an inbox in /var/mail/ and a bunch of folders under ~/Maildir. When I upgraded from 14.04 there were a bunch of questions about keeping old/new config files and my muddling through it has me seeing only the inbox, and then a Drafts, Sent and Trash Folder. I would like to regain access to the messages stored under ~/Maildir, but have been thoroughly unsuccessful. I seem to run into duplicate prefix issues and I suspect I have other issues, when I try to add: namespace rest { separator = / prefix = location = maildir:~/Maildir } to what is already present. I've seen a few of the wiki pages, but not fully understanding what is going-on I'm afraid I've not groked them terribly well. any help/pointers for this cluser would be much appreciated. rick jones raj@tardy:~$ dovecot --version 2.2.9 raj@tardy:~$ dovecot -n # 2.2.9: /etc/dovecot/dovecot.conf doveconf: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:25: 'imaps' protocol is no longer necessary, remove it doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:732: protocol managesieve {} has been replaced by protocol sieve { } doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:904: add auth_ prefix to all settings inside auth {} and remove the auth {} section completely doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:942: passdb pam {} has been replaced by passdb { driver=pam } doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:1055: userdb passwd {} has been replaced by userdb { driver=passwd } doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:1117: auth_user has been replaced by service auth { user } # OS: Linux 3.13.0-95-generic x86_64 Ubuntu 14.04.5 LTS auth_mechanisms = plain login log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } passdb { driver = pam } protocols = imap service auth { user = root } ssl_cert = </etc/dovecot/dovecot.pem ssl_key = </etc/dovecot/private/dovecot.pem userdb { driver = passwd } userdb { driver = passwd } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } raj@tardy:~$ vi /etc/dovecot/conf.d/15-mailboxes.conf raj@tardy:~$ dovecot --version 2.2.9

1 0

imapc fetch optimization
by Nagy, Attila 27 Sep '16

27 Sep '16

Hi, imapc does a lot of UID FETCH $UID (BODY.PEEK[]), which is nice, because it works even with the dumbest IMAP server, altough it really kills performance, especially on high latency lines. I wonder: if IMAP servers can effectively handle boundless fetches (like a list with all wanted UIDs, or simply 1:* if all are needed), do you see this as a good addition to develop? This could be a new imapc_features setting afterall... Thanks,

2 8

Drac Plugin
by Darryl Baker 27 Sep '16

27 Sep '16

I now have the drac plugin compiled and working. The plugin binary might even work with the Debian/Ubuntu binary. It was a one line change. I need to talk to the sendmail folks about their macro for the DRAC feature. My custom sendmail.cf code works in a way that makes using drac and SpamHaus for anyone on a blacklisted IP such as non-comercial Comcast users. I am hoping that the drac plugin will get fixed in the core distribution and possible the new binary make it into the Debian/Ubuntu binary build. *** dovecot-2.2.22/src/plugins/drac/drac-plugin.c 2016-09-23 22:49:56.345568783 -0500 --- dovecot-2.2.22/src/plugins/drac/drac-plugin.c-orig 2016-09-26 14:33:46.828670909 -0500 *************** *** 25,31 **** /* libdrac function */ int dracauth(char *, unsigned long, char **); ! const char *drac_plugin_version = DOVECOT_ABI_VERSION; static struct timeout *to_drac = NULL; static const char *drachost = NULL; /* dracd host */ --- 25,31 ---- /* libdrac function */ int dracauth(char *, unsigned long, char **); ! const char *drac_plugin_version = DOVECOT_VERSION; static struct timeout *to_drac = NULL; static const char *drachost = NULL; /* dracd host */ *Darryl Baker*

2 1

Re: Shared mailboxes nightmare (for me :-( )
by Felix Rubio 27 Sep '16

27 Sep '16

Hi KR, Just checked the folders, and they do not contain any of these subfolders. This is the structure I see: . ├── dovecot-acl-list ├── dovecot.list.index ├── dovecot.list.index.log ├── dovecot.list.index.log.2 ├── dovecot.mailbox.log ├── dovecot-uidvalidity ├── dovecot-uidvalidity.570e9b2d ├── mailboxes │ ├── folderB │ │ └── dbox-Mails │ │ ├── dovecot.index │ │ ├── dovecot.index.backup │ │ ├── dovecot.index.cache │ │ ├── dovecot.index.log │ │ └── dovecot.index.thread │ ├── dovecot-acl │ ├── folderA │ │ └── dbox-Mails │ │ ├── dovecot.index.cache │ │ └── dovecot.index.log │ ├── folderC │ │ └── dbox-Mails │ │ ├── dovecot.index │ │ ├── dovecot.index.backup │ │ ├── dovecot.index.cache │ │ └── dovecot.index.log │ ├── INBOX │ │ └── dbox-Mails │ │ ├── dovecot.index │ │ ├── dovecot.index.backup │ │ ├── dovecot.index.cache │ │ └── dovecot.index.log │ ├── Junk │ │ └── dbox-Mails │ │ └── dovecot.index.log │ ├── Sent │ │ └── dbox-Mails │ │ ├── dovecot.index.cache │ │ └── dovecot.index.log │ └── Trash │ └── dbox-Mails │ └── dovecot.index.log ├── sieve │ ├── dovecot.sieve │ ├── dovecot.svbin │ └── tmp ├── spamassassin │ ├── bayes.mutex │ ├── bayes_seen │ └── bayes_toks ├── storage │ ├── dovecot.map.index │ ├── dovecot.map.index.log │ ├── m.1 │ ├── m.10 │ ├── m.11 │ ├── m.12 │ ├── m.13 │ ├── m.14 │ ├── m.2 │ ├── m.3 │ ├── m.4 │ ├── m.5 │ ├── m.6 │ ├── m.7 │ ├── m.8 │ └── m.9 └── subscriptions Update: I have finally managed to see these folders in roundcube, after setting subscriptions=no (instead of yes) in the shared namespace. Also, I have been able to keep it working with the single dovecot-acl file I have inside mailboxes. Is this structure correct? I am asking becaus I have another user, for which I migrated the format to mdbox, for which I have these folders (curr, tmp, new) but also the structure I have for the shared :s. Are both formats mixed for that user? Thank you, Felix On 27 September 2016 00:25:40 CEST, "dovecot(a)avv.solutions" <dovecot(a)avv.solutions> wrote: >Quick thought: are the sub-folder structure complete? > >I mean, do they have their cur+new+tmp directories? > >With their rights ownership+permissions? > >KR > >On 09/26/2016 11:31 PM, Felix Rubio Dalmau wrote: >> Hi everybody, >> >> I am honestly desperate: I have spent/invested the whole day in >trying to set a shared mailbox, with quite partial success. The INBOX >is merged with the top level mailbox, and there are many more folders. >To give an idea, for the shared account sharedacc(a)domain.org, this is >how looks the folder structure: >> >> sharedacc >> |-folderA >> |-folderB >> \-folderC >> >> in the account for usera(a)domain.org, I see the following: >> >> usera >> |-folderD >> |-folderE >> |-folderF >> \-shared >> \-sharedacc >> >> So, I do not get to see folderA, folderB, folderC, etc. >> >> My configuration is: >> >> # 2.2.25 (7be1766): /etc/dovecot/dovecot.conf >> # Pigeonhole version 0.4.14 (099a97c) >> # OS: Linux 4.5.4-0 x86_64 Debian stretch/sid zfs >> >> mail_plugins = zlib expire acl >> >> plugin { >> acl = vfile >> acl_shared_dict = proxy::acl >> } >> >> dict { >> acl = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext >> } >> >> namespace { >> list = children >> location = >mdbox:/mnt/vmail/%%d/%%n:INDEXPVT=/mnt/vmail/indexes/shared/%%d/%%n >> prefix = shared/%%n/ >> separator = / >> subscriptions = yes >> type = shared >> } >> >> protocol lmtp { >> mail_plugins = zlib expire acl sieve >> } >> >> protocol imap { >> mail_plugins = zlib expire acl antispam imap_acl >> } >> >> the files I have one the account for sharedacc are: >> sharedacc >> |-dovecot-acl >> |-dovecot-acl-list >> \-mailboxes >> |-dovecot-acl >> |-folderA >> | \-dbox-Mails >> | \-dovecot-acl >> |-folderB >> | \-dbox-Mails >> | \-dovecot-acl >> \-folderC >> \-dbox-Mails >> \-dovecot-acl >> >> In dovecot-acl-list I have the following contents: >> 1474920778 folderA >> 1474920778 folderB >> 1474920778 folderC >> >> and in every dovecot-acl, I have: >> user=usera(a)domain.org akxeilprwts >> >> All the files on the filesystem are owned by the same vmail user. >> What is strange is that I can see all these folderA, folderB, folderC >in roundcube, and I can click to subscribe to them. However, when I go >back to the general view, the subscriptions have been reset and I see >only sharedacc, without a thing inside. Finally, in kmail I can see the >subscribed folders without a problem (??!) >> >> Can please somebody help me? -- Sent from my phone. Please excuse my brevity. -- Sent from my phone. Please excuse my brevity.

1 0

Shared mailboxes nightmare (for me :-( )
by Felix Rubio Dalmau 26 Sep '16

26 Sep '16

Hi everybody, I am honestly desperate: I have spent/invested the whole day in trying to set a shared mailbox, with quite partial success. The INBOX is merged with the top level mailbox, and there are many more folders. To give an idea, for the shared account sharedacc(a)domain.org, this is how looks the folder structure: sharedacc |-folderA |-folderB \-folderC in the account for usera(a)domain.org, I see the following: usera |-folderD |-folderE |-folderF \-shared \-sharedacc So, I do not get to see folderA, folderB, folderC, etc. My configuration is: # 2.2.25 (7be1766): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.14 (099a97c) # OS: Linux 4.5.4-0 x86_64 Debian stretch/sid zfs mail_plugins = zlib expire acl plugin { acl = vfile acl_shared_dict = proxy::acl } dict { acl = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } namespace { list = children location = mdbox:/mnt/vmail/%%d/%%n:INDEXPVT=/mnt/vmail/indexes/shared/%%d/%%n prefix = shared/%%n/ separator = / subscriptions = yes type = shared } protocol lmtp { mail_plugins = zlib expire acl sieve } protocol imap { mail_plugins = zlib expire acl antispam imap_acl } the files I have one the account for sharedacc are: sharedacc |-dovecot-acl |-dovecot-acl-list \-mailboxes |-dovecot-acl |-folderA | \-dbox-Mails | \-dovecot-acl |-folderB | \-dbox-Mails | \-dovecot-acl \-folderC \-dbox-Mails \-dovecot-acl In dovecot-acl-list I have the following contents: 1474920778 folderA 1474920778 folderB 1474920778 folderC and in every dovecot-acl, I have: user=usera(a)domain.org akxeilprwts All the files on the filesystem are owned by the same vmail user. What is strange is that I can see all these folderA, folderB, folderC in roundcube, and I can click to subscribe to them. However, when I go back to the general view, the subscriptions have been reset and I see only sharedacc, without a thing inside. Finally, in kmail I can see the subscribed folders without a problem (??!) Can please somebody help me?

1 0

Re: Self-Signed Certificate issue
by Joseph Tam 26 Sep '16

26 Sep '16

Darryl Baker writes: > I am running a small email site which I am moving from uw-imapd and Solaris > to Ubuntu and Dovecot imaps and pop3s. I am trying to use a self-signed > certificate for this site. I am using Thunderbird as the test client. I've > tried both the pre-built snakeoil certificate and building a special one > for dovecot. In /var/log/mail.err I keep getting what I am interpreting as > a missing CA cert. The message is: > > dovecot: imap-login: Error: SSL: Stacked error: error:14094418:SSL > routines:ssl3_read_bytes:tlsv1 alert unknown ca: SSL alert number 48 > > The certificate was created by: > > openssl req -new -x509 -days 365 -nodes -out /etc/ssl/certs/dovecot.pem > -keyout /etc/ssl/private/dovecot.pem Are you using this as a server certificate or as a client certificate? Please output your dovecot's configuration, esp. your SSL setup. doveconf -n | grep ssl Joseph Tam <jtam.home(a)gmail.com>

1 0

Setting hostdomain
by Arie Peterson 25 Sep '16

25 Sep '16

Hi all, Preparing for a replication setup, I read (at the bottom of <http://wiki2.dovecot.org/Replication>) that `dovecot --hostdomain` should give a different output on the two servers. This is not the case for me: both give "localhost". I'm trying to change my configuration to set the hostdomain to another value, but I can't find how to do this. I tried: • setting the environment variable DOVECOT_HOSTDOMAIN=mydomain in /etc/default/dovecot (which is read by the init script); • adding the line import_environment = TZ DOVECOT_HOSTDOMAIN=mydomain to dovecot.conf; • the combination of both of the above. However, after restarting dovecot none of these changes seem to have any effect: `dovecot --hostdomain` still returns "localhost". This is with dovecot version 2.2.13. How should one change this setting? Thanks, Arie

2 2

fail to compile with openssl-1.1.x
by A. Schulze 25 Sep '16

25 Sep '16

Hi again, now I get compile errors. Is openssl-1.1.xy supported? iostream-openssl.c: In function 'openssl_iostream_verify_client_cert': iostream-openssl.c:118:37: error: dereferencing pointer to incomplete type subject = X509_get_subject_name(ctx->current_cert); ^ iostream-openssl.c:127:37: error: dereferencing pointer to incomplete type X509_verify_cert_error_string(ctx->error), certname)); Andreas ^

2 1