September 2019 - dovecot

TLS not working with iOS beta?
by Henrik Johansson 08 Sep '19

08 Sep '19

Hi, Have anyone else experienced problems using Dovecot with the mail app in beta releases of iOS/iPadOS 13? TLS is failing for my, it have worked fine for years and I am on the latest Dovecot version now, it works fine with older clients but not with the ones upgraded: Sep 04 19:49:16 imap-login: Debug: SSL: where=0x10, ret=1: before/accept initialization Sep 04 19:49:16 imap-login: Debug: SSL: where=0x2001, ret=1: before/accept initialization Sep 04 19:49:16 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv2/v3 read client hello A Sep 04 19:49:16 imap-login: Debug: SSL alert: where=0x4008, ret=552: fatal handshake failure Sep 04 19:49:16 imap-login: Debug: SSL: where=0x2002, ret=-1: error Sep 04 19:49:16 imap-login: Debug: SSL: where=0x2002, ret=-1: error Sep 04 19:49:16 imap-login: Debug: SSL error: SSL_accept() failed: error:1408A0C1:SSL routines:ssl3_get_client_hello:no shared cipher Sep 04 19:49:16 imap-login: Debug: SSL: where=0x2002, ret=-1: error Sep 04 19:49:16 imap-login: Debug: SSL error: SSL_accept() failed: error:140800FF:SSL routines:ssl3_accept:unknown state Sep 04 19:49:16 imap-login: Info: Disconnected (no auth attempts in 0 secs): user=<>, rip=11.22.33.44, lip=11.22.33.44, TLS handshaking: SSL_accept() failed: error:140800FF:SSL routines:ssl3_accept:unknown state, session=<lz7m2r2rjPouOvrk> Working client: Sep 04 19:57:58 imap-login: Debug: SSL: where=0x10, ret=1: before/accept initialization Sep 04 19:57:58 imap-login: Debug: SSL: where=0x2001, ret=1: before/accept initialization Sep 04 19:57:58 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv2/v3 read client hello A Sep 04 19:57:58 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 read client hello A Sep 04 19:57:58 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write server hello A Sep 04 19:57:58 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write certificate A Sep 04 19:58:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write key exchange A Sep 04 19:58:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write server done A Sep 04 19:58:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 flush data Sep 04 19:58:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 read client certificate A Sep 04 19:58:01 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client key exchange A Sep 04 19:58:01 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client key exchange A Sep 04 19:58:01 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client key exchange A Sep 04 19:58:01 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client key exchange A Sep 04 19:58:03 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 read client key exchange A Sep 04 19:58:03 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 read certificate verify A Sep 04 19:58:03 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read finished A Sep 04 19:58:03 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 read finished A Sep 04 19:58:03 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write change cipher spec A Sep 04 19:58:03 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write finished A Sep 04 19:58:03 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 flush data Sep 04 19:58:03 imap-login: Debug: SSL: where=0x20, ret=1: SSL negotiation finished successfully Sep 04 19:58:03 imap-login: Debug: SSL: where=0x2002, ret=1: SSL negotiation finished successfully Sep 04 19:58:03 imap-login: Info: Login: user=<username>, method=LOGIN, rip=11.22.33.44, lip=11.22.33.44, mpid=28781, TLS, TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits), session=<LklR9r2Vtb4uOzra> Config: # egrep -v "^#|^$" 10-ssl.conf 10-auth.conf 10-ssl.conf:ssl = required 10-ssl.conf:ssl_cert = </path/to/fullchain.pem 10-ssl.conf:ssl_key = </path/to/privkey.pem 10-ssl.conf:ssl_dh = </path/to/dh.pem 10-ssl.conf:ssl_min_protocol = TLSv1.1 10-ssl.conf:ssl_cipher_list = ALL:!kRSA:!SRP:!kDHd:!DSS:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK:!RC4:!ADH:!LOW@STRENGTH 10-auth.conf:disable_plaintext_auth = yes 10-auth.conf:auth_mechanisms = login 10-auth.conf:!include auth-system.conf.ext # dovecot --version 2.3.7.2 (3c910f64b) Anyone seeing something similar and/or have suggestions on how to proceed? Regards Henrik

4 7

intermittent failures when reuse_port is enabled
by Imre Rad 08 Sep '19

08 Sep '19

I'm encountering connection issues to Dovecot when reuse_port is activated. Some of the connections work fine, but about every 3rd of them does not receive the banner after the TCP connection has established: # nc -v 10.6.7.133 143 Connection to 10.6.7.133 143 port [tcp/imap2] succeeded! * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Hello. ^C # nc -v 10.6.7.133 143 Connection to 10.6.7.133 143 port [tcp/imap2] succeeded! * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Hello. ^C # nc -v 10.6.7.133 143 Connection to 10.6.7.133 143 port [tcp/imap2] succeeded! ^C The relevant processes listening on this port: # netstat -nap|grep 143 tcp 0 0 0.0.0.0:143 0.0.0.0:* LISTEN 15110/dovecot/imap- tcp 0 0 0.0.0.0:143 0.0.0.0:* LISTEN 15103/dovecot/imap- tcp 5 0 0.0.0.0:143 0.0.0.0:* LISTEN 15100/dovecot After removing the reuse_port = yes configuration directive there is only one single process listening (and the service is running without any issues): # netstat -nap|grep 143 tcp 0 0 0.0.0.0:143 0.0.0.0:* LISTEN 15292/dovecot The test config was Linux 4.9.0-4-amd64 on debian-stretch and dovecot-2.2.36.4 (compiled by me) running on a VM with 1 CPU core. If that matters, dovecot was started in a docker container but using the hosts's network namespace. What am I missing? Thanks, Imre

1 0

configure: error: fd passing is required for Dovecot to work
by zahn 06 Sep '19

06 Sep '19

Hello I changed our old gcc compiler from the version: gcc-4.1.2-13.fc6 to the newer one: gcc version 8.3.0 (GCC). Then I wanted to compile: Dovecot 2.3.7 and I get the following error with ./configure CPPFLAGS="-I/usr/local/openssl/include" \ LDFLAGS="-L/usr/local/openssl/lib" \ ./configure --prefix=/usr/local/dovecot \ --disable-static \ --with-ssl=openssl checking whether fd passing works... no configure: error: fd passing is required for Dovecot to work With the old Compiler configure works well. I couldn't find a solution on the Internet - can you help me ? -- Schöne Grüsse aus Oberdiessbach Martin Zahn Akadia AG Martin Zahn Software Ing. HTL Oracle Certificate Professional Information Technology Fichtenweg 10 CH-3672 Oberdiessbach Tel: +41 79 410 27 87 Web: www.akadia.com E-Mail: martin.zahn(a)akadia.com

3 2

Namespace structure
by Daniel Miller 06 Sep '19

06 Sep '19

Is the following "legal" for Dovecot? And...is this separation recommended or a bad idea? Particularly I'm asking about the "archives" namespace - I haven't actually implemented this yet and I'm checking before I break something. 10-mail.conf # Primary private namespace # Using sdbox for storage namespace inbox { type = private separator = / prefix = location = sdbox:/var/mail/%d/%n/sdbox inbox = yes hidden = no list = yes subscriptions = yes } # For long-term archival namespace archives { type = private separator = / prefix = Archives/ location = mdbox:/var/mail/%d/%n/Archives/mdbox subscriptions = no list = children } # Shared mailboxes mail_shared_explicit_inbox = yes namespace usershares { type = shared separator = / prefix = shared/%%n/ location = sdbox:/var/mail/%%d/%%n/sdbox subscriptions = no list = children } # Virtual mailboxes - for server-side searches namespace virtual { prefix = virtual/ separator = / location = virtual:/var/mail/%d/%n/virtual subscriptions = no list = children } -- Daniel

1 0

login failure after upgrade to dovecot 2.3.7.2
by MK 05 Sep '19

05 Sep '19

Hi List, after upgrading dovecot from version 2.2.33.2 to 2.3.7.2 I got a lot of error messages like the following if the process count of imap processes reaches nearly 1000 (~950 (there are a few pop-connections)). Sep 5 11:27:32 mailbox1 dovecot: imap-login: Internal login failure (pid=27728 id=116): user=<xxxx(a)xxxx.xx>, method=PLAIN, rip=x.x.x.x, lip=x.x.x.x, session=<qETa7cqRzpZV3IEw> Sep 5 11:27:33 mailbox1 dovecot: imap-login: Error: master(imap): net_connect_unix(imap) failed: Resource temporarily unavailable - http://wiki2.dovecot.org/SocketUnavailable (client-pid=27704, client-id=79, rip=x.x.x.x, created 511 msecs ago, received 0/4 bytes) Our setup consists of some servers with dovecot as proxy/redirector as frontend servers, redirecting the logged in users to the backend servers storing the mailboxes. OS is CentOS 6 on both server types. The backend server in question has usually ~ 2500 simultaneous imap connections. Before the update there where no problems. During the update I merged the old 2.2 config into the new 2.3 from the fresh installed binary (Repo from dovecot.org) As I found the failure above in the logfile I testet a lot, to figure out how to fix this, because for me it seemed to be some limit around 1000 connections/processes anywhere in the config. In the end I changed the default value of "default_client_limit" from ist default 1000 to 8192 and the problem was fixed for the moment. Now I'm trying to understand why this fixes the problem and what the difference is between 2.2 and 2.3. For me it seems like something changed in the architecture during the release change, but I didn't find anything. I looked into the release notes and also checked the differences beween the 2.2 and 2.3 default config values (using doveconf -d). Can anyone help? Here is the output of doveconf -n # 2.3.7.2 (3c910f64b): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.7.2 (7372921a) # OS: Linux 2.6.32-696.23.1.el6.x86_64 x86_64 CentOS release 6.10 (Final) auth_mechanisms = plain login default_client_limit = 8192 disable_plaintext_auth = no mail_location = mdbox:%h mail_plugins = quota zlib managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { quota = dict:User quota::file:%h/dovecot-quota quota_warning = storage=90%% quota-warning 90 %u sieve = file:~/sieve;active=~/.dovecot.sieve zlib_save = gz zlib_save_level = 6 } pop3_client_workarounds = outlook-no-nuls oe-ns-eoh protocols = imap pop3 lmtp sieve service imap-login { process_min_avail = 12 service_count = 0 } service imap { process_limit = 8192 } service lmtp { inet_listener lmtp { address = * port = 24 } } service pop3-login { process_min_avail = 12 service_count = 0 } service pop3 { process_limit = 1024 } service quota-warning { executable = script /scripts/quota.sh unix_listener quota-warning { user = vmail } user = vmail } ssl = no userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol lmtp { mail_plugins = quota zlib sieve } protocol imap { mail_max_userip_connections = 30 mail_plugins = quota zlib imap_quota } protocol pop3 { mail_plugins = quota zlib } greetings, Oliver

1 0

dsync and altpath on shared storage.
by Peter Mogensen 05 Sep '19

05 Sep '19

Hi, I was wondering... If one had mdbox ALT path set to a shared storage mount (say, on NFS) and one wanted to move a mailbox to a different host... I guess it in principle wouldn't be necessary to copy all the ALT storage through dsync, when the volume could just be mounted on the new host. Is there anyway for dsync to avoid moving Gigabytes of data for could just be "moved" by moving the mount? /Peter

2 6

Different passdb backends for different services
by lists＠mlserv.org 05 Sep '19

05 Sep '19

Hi, as Dovecot supports submission, which is the sending direction, I am interested to know, if I can configure a separate passdb backend just for submission. I habe LDAP attributes that differ sending or receiving permissions. It would be nice, if I had a second passdb backend just for submission, which has a LDAP filter for locking this service. Example for IMAP, POP3, Sieve: (&(mail=%s)(mailAllowIncoming=TRUE)) Example for Submission: (&(mail=%s)(mailAllowOutgoing=TRUE)) Use case is to lock compromised accounts that send spam. An operator can notify the account owner by placing a warning messegae into his/her mailbox. Is this possible? Thanks in advance Christian

3 9

Global ACL in SQL or LDAP possible?
by lists＠mlserv.org 04 Sep '19

04 Sep '19

Hi, Can global ACLs for public folders be stored in SQL or LDAP instead of a dovecot-acl file? I could only find something for shared folders, but not for public folders? Thanks in advance Christian

1 1

Server administration
by Aleksandr Mette 04 Sep '19

04 Sep '19

Dear Sirs, There is Postfix+Dovecot+Sogo installation in our company. I have attentively red Installation and Configuration Guide. However, I could not find some information. Could you give me an advise how to: 1. Add/remove e-mail address 2. Change user e-mail address password 3. Add user e-mail address into mail alias 4. Forward e-mail 5. List all users e-mails What is the best GUI interface for Dovecot administration? With kind regards, Alex

9 14

How are imap images supposed to be stored
by d.gentner＠m4ever.de 04 Sep '19

04 Sep '19

Hello. This is a question about the imap protocol, since I am having a hard time finding these things out, so I hope you guys can help me. We are using Dovecot to receive mails and having an issue with Thunderbird. Basically, we are running into this bug with a lot of people: https://bugzilla.mozilla.org/show_bug.cgi?id=216308. <https://bugzilla.mozilla.org/show_bug.cgi?id=216308> The gist of it is, that sometimes, when there is an image linked with the imap:// protocol in the mail, then Thunderbird wants to subscribe to the folder that contains this mail, but fails. If I pull the mail off the server, it also has that link in the raw mail. However, most mails store the images as a base64 code block. I have actually seen mails getting changed over night, from imap:// links to base64 code blocks, but I can't reproduce that. All computers are supposed to have the same Thunderbird version and they do. My questions right now are: * Speaking about the general imap/mail protocol, do mails store images as base64 or imap:// links. What is the standard here? * Is there anything we can do to prevent Thunderbird from running into this bug? We are using Dovecot 2.2.36.4 * What can cause an email getting changed over night or getting synced back with the base64 blocks? It was already read, when we ran into the issue. With best regards, Domeniko Gentner

2 1