May 2022 - dovecot - dovecot.org

iPhone does not show 'read marks'.
by Heinz Bruederlin 31 May '22

31 May '22

The iPhone mail app does not show the read marks.The OS/X mail sets and shows the read marks correctly.Is there a way to fix or at least debug this behaviour ?

1 0

Disconnected: Auth process broken (disconnected before auth was ready ... ???
by Hippo Man 30 May '22

30 May '22

I've been running dovecot 2.2.36.4 (baf9232c1) on my Debian-8 host for a long time with no problems. I am trying to move my email server to a Debian-11 host, and I have Dovecot configured exactly the same way that I have it configured under Debian-8. However, when I try to connect to that server via imap, I always get the following error: 2022.05.30-18:17:21 imap-login: Info: Disconnected: Auth process broken (disconnected before auth was ready, waited 0 secs): user=<>, rip=::1, lip=::1, secured, session=<2+nKqj7g4t4AAAAAAAAAAAAAAAAAAAAB> The output of "dovecot -n" appears at the bottom of this message. I'm using mysql on the Debian-8 server for my authentication database, and I'm using mariadb on the Debian-11 server. The contents of the database on the new, Debian-11-based server are exactly the same as those on the Debian-8 server. These are the contents of /opt/local/etc/dovecot/dovecot-sql.ext with the comments removed. I can manually run the following queries against the database with a valid login ID, and these queries succeed ... driver = mysql connect = host=127.0.0.1 user=postfix password=XXXXXXXX dbname=postfix default_pass_scheme = CRYPT password_query = SELECT username AS user, domain, password FROM mailbox WHERE (username = '%u' OR find_in_set('%u', loginid) > 0) AND active = 1 user_query = SELECT concat('/var/vmail/', maildir) AS home, 1003 AS uid, 1003 AS gid FROM mailbox WHERE (username = '%u' OR find_in_set('%u', loginid) > 0) AND active = 1 Also ... % ls -Flas /var/run/dovecot/auth-userdb 0 srw-rw-rw- 1 dovecot root 0 May 30 18:30 /var/run/dovecot/auth-userdb= % ls -Flas /opt/local/etc/dovecot/dovecot-master-users-passwords 4 -rw-rw-r-- 1 root dovecot 36 Dec 16 2018 /opt/local/etc/dovecot/dovecot-master-users-passwords % ls -Flas /opt/local/etc/dovecot/ad-hoc-userdb 4 -rw-rw-r-- 1 root root 416 May 7 14:53 /opt/local/etc/dovecot/ad-hoc-userdb % ls -Flas /opt/local/etc/dovecot/dovecot-master-users-passwords 4 -rw-rw-r-- 1 root dovecot 36 Dec 16 2018 /opt/local/etc/dovecot/dovecot-master-users-passwords When I start up dovecot, the following line appears at the bottom of /var/log/mailclient.log ... 2022.05.30-18:31:37 master: Info: Dovecot v2.2.36.4 (baf9232c1) starting up for imap, pop3, lmtp, imap, pop3 (core dumps disabled) However, if I then run "telnet localhost 143", the following lines appear at the end of /var/log/mailclient.log ... 2022.05.30-18:32:44 master: Error: service(auth): command startup failed, throttling for 2 secs 2022.05.30-18:32:44 auth: Fatal: master: service(auth): child 235327 killed with signal 11 (core dumps disabled) 2022.05.30-18:32:44 imap-login: Info: Disconnected: Auth process broken (disconnected before auth was ready, waited 0 secs): user=<>, rip=::1, lip=::1, secured, session=<8ezN4T7gJOAAAAAAAAAAAAAAAAAAAAAB> The exact, same actions on my Debian-8 host do not fail. And here is the output from "dovecot -n". As you can see, all "verbose" and debug-related options are set to "yes". Thank you for any suggestions you might be able to offer: # 2.2.36.4 (baf9232c1): /opt/local/etc/dovecot/dovecot.conf # OS: Linux 5.10.0-14-amd64 x86_64 Debian 11.3 ext4 # Hostname: my.hostname.com auth_debug = yes auth_debug_passwords = yes auth_master_user_separator = : auth_mechanisms = plain login auth_socket_path = /var/run/dovecot/auth-userdb auth_verbose = yes auth_verbose_passwords = plain base_dir = /var/run/dovecot/ disable_plaintext_auth = no log_path = /var/log/mailclient.log log_timestamp = "%Y.%m.%d-%H:%M:%S " mail_debug = yes mail_location = maildir:/var/vmail/%d/%n/ namespace inbox { inbox = yes list = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = INBOX. separator = . } passdb { args = /opt/local/etc/dovecot/dovecot-master-users-passwords driver = passwd-file master = yes pass = yes } passdb { args = /opt/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } passdb { args = scheme=plain username_format=%u /opt/local/etc/dovecot/ad-hoc-userdb driver = passwd-file } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = postmaster(a)my.hostname.com protocols = imap pop3 lmtp imap pop3 service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service imap { executable = imap postlogin } service pop3 { executable = pop3 postlogin } service postlogin { executable = script-login -d rawlog } ssl_cert = </etc/letsencrypt/live/my.hostname.com/fullchain.pem ssl_cipher_list = HIGH:!SSLv2:!aNULL@STRENGTH ssl_client_ca_dir = /etc/ssl/certs ssl_client_ca_file = ca-certificates.crt ssl_key = # hidden, use -P to show it ssl_prefer_server_ciphers = yes userdb { args = /opt/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } userdb { args = scheme=plain username_format=%u /opt/local/etc/dovecot/ad-hoc-userdb driver = passwd-file } protocol imap { mail_max_userip_connections = 128 } -- hippoman(a)gmail.com Take a hippopotamus to lunch today.

1 1

Force TCP socket disconnect on imap login failure?
by Lloyd Zusman 27 May '22

27 May '22

I'm running dovecot 2.2.13 under Debian 8. I'd like to force an immediate TCP socket disconnect after any imap login attempt that fails. Right now, if invalid credentials are supplied during an imap login, the client can keep retrying logins with different credentials. However, I want to prevent that from occurring by causing the socket connection to be closed as soon as there is any failed login attempt. I haven't been able to find any dovecot configuration setting which could control this behavior, but I'm hoping that I just missed something. Thank you very much for any suggestions. -- hippoman(a)gmail.com Take a hippopotamus to lunch today.

16 28

solr-jetty package in Debian 11 bullseye
by John Gateley 25 May '22

25 May '22

Hello, I am in the process of upgrading the OS on my mailserver, currently Debian 9, to Debian 11. The solr-jetty package does not appear to exist in Debian 11. Does anyone know where it is? Thanks John

2 1

Re: Duplicate messages if message is moved when using dsync
by Thom Pol 25 May '22

25 May '22

Hi, Thanks for your reply! The dsync is triggered on IMAP/POP3/LDA/LMTP activity. See my config dump from the first email. I'm wondering if my config is not OK so it causes dsync to sync twice? > you need / preferably use a database for your user auth I already do this. > run the command doveadm user '*' - it needs to return a list of users > that will trigger replication (after doing config above) This part works fine. Thanks, Thom Pol On 18/05/2022 16:51, Paul Kudla (SCOM.CA Internet Services Inc.) wrote: > ok - question > > when you say dsync are you running that manually or as a cronjob ?? > > or using replication via dsync > > there is a difference > > replication is designed to handle mailbox changes by quing the changes > on the fly and then update in the background. > > replication tracks all changes in a mailbox and then sends them one at a > time to the target server. > > i run replication with tcp (not tcps or dsync) > > I find (other then the 300+folder issues) that it runs pretty good in > real time. > > if you are running dsync manually then yes timing on its own will be a > hit and miss and it will never sync properly if something appears during > the dsync process. > > if you have the sive running as discussed that is the first step > > you should setup replication so things are handled in real time. > > pls advise if you have already done replication or just manually dsyncing. > > Below is basic replication setup but you need to make sure various > pre-requirements are in place a head of time. > > 1. you need / preferably use a database for your user auth > > you need to setup an iterate sql statement that returns the user > list of users to be replicated > > Example (i use pgsql) : > > # cat dovecot-pgsql.conf > driver = pgsql > connect = host=localhost port=5433 dbname=scom_billing user=pgsql password= > default_pass_scheme = PLAIN > > password_query = SELECT username as user, password FROM email_users > WHERE username = '%u' and password <> 'alias' and status = True and > destination = '%u' > > user_query = SELECT home, uid, gid FROM email_users WHERE username = > '%u' and password <> 'alias' and status = True and destination = '%u' > > iterate_query = SELECT "username" as user, domain FROM email_users WHERE > status = True and alias_flag = False > > #iterate_query above is what returns the user lists > > 2. run the command doveadm user '*' - it needs to return a list of users > that will trigger replication (after doing config above) > > 3. in general here is my relative parts for tcp replication > > In dovecot.conf > > --------------------------------------------------------------------------- > > mail_plugins = " virtual notify replication fts fts_lucene " > > replication_dsync_parameters = -d -N -l 300 -U > > dsync_remote_cmd = ssh -l%{login} %{host} doveadm dsync-server -u%u > > plugin { > > ..... > mail_replica = tcp:10.221.0.19:12345 > > #(note this is the ip address of the other server) > #it is the only config change ie server one above > #server2 would be the other server for communicating. > > > > ..... > > } > > protocol imap { > mail_max_userip_connections = 50 > mail_plugins = $mail_plugins notify replication > } > > protocol pop3 { > mail_max_userip_connections = 50 > mail_plugins = $mail_plugins notify replication > } > > protocol imaps { > mail_max_userip_connections = 25 > mail_plugins = $mail_plugins notify replication > } > > protocol pop3s { > mail_max_userip_connections = 25 > mail_plugins = $mail_plugins notify replication > } > > replication_max_conns = 100 (optional) > > replication_full_sync_interval = 1d > > service replicator { > client_limit = 0 > drop_priv_before_exec = no > idle_kill = 4294967295s > process_limit = 1 > process_min_avail = 0 > service_count = 0 > vsz_limit = 8g > unix_listener replicator-doveadm { > mode = 0600 > user = vmail > } > vsz_limit = 8192M > } > > service aggregator { > process_limit = 1000 > #vsz_limit = 1g > fifo_listener replication-notify-fifo { > user = vmail > group = vmail > mode = 0666 > } > > } > > > > ---------------------------------------------------------------------------- > > that should do it? > > > > > > > > > > > > > Happy Wednesday !!! > Thanks - paul > > Paul Kudla > > > Scom.ca Internet Services<http://www.scom.ca> > 004-1009 Byron Street South > Whitby, Ontario - Canada > L1N 4S3 > > Toronto 416.642.7266 > Main?1.866.411.7266 > Fax?1.888.892.7266

1 0

Panic: file userdb-blocking with Dovecot 2.3.19
by Niklas Meyer 25 May '22

25 May '22

Hello all, since we´ve tested around with the new dovecot release in the mailcow project we´ve came across a curious and new error with Dovecot: /auth: Panic: file userdb-blocking.c: line 124 (userdb_blocking_iter_next): assertion failed: (ctx->conn != NULL)/ *System Information:* *Dovecot Version: 2.3.19 (b3ad6004dc)** * *OS: Debian 11 (dovecot is running in a docker container)* *CPU: x86* *Filesystem: ext4* The error occurs only with the newest Dovecot release (2.3.19), the config hasn´t been changed. In the Attachment you can find all (hopefully) helpful informations. Maybe it is a simple fix. Kind regards and thanks for your help. -- The mailcow Team - Niklas --- The Infrastructure Company GmbH Parkstr. 42 47877 Willich Handelsregister: Amtsgericht Krefeld, HRB 15904 USt-IdNr.: DE308854956 Geschäftsführer: Martin Vogt /*Hinweis: *Der Inhalt dieser E-Mail ist vertraulich und nur für den in der Nachricht angegebenen Empfänger bestimmt. Es ist strengstens untersagt, irgendeinen Teil dieser Nachricht ohne schriftliche Zustimmung des Absenders an Dritte weiterzugeben. Wenn Sie diese Nachricht irrtümlich erhalten haben, antworten Sie bitte auf diese Nachricht und folgen Sie mit ihrer Löschung, so dass wir sicherstellen können, dass ein solcher Fehler in Zukunft nicht mehr vorkommt./

3 2

Message attachments, relocated with Tbird in Dovecot maildir store, not openable; reversible by moving BACK to inbox?
by PGNet Dev 25 May '22

25 May '22

I run dovecot --version 2.3.17.1 (476cd46418) on lsb_release -rd Description: Fedora release 35 (Thirty Five) Release: 35 mail store is maildir mail_location = maildir:/data/vmail/%d/%n/Maildir:CONTROL=/data/vmail/%d/%n/_control:INDEX=/var/vmail-index/%d/%n:LAYOUT=fs:UTF-8 front-end client is thunderbird --version Thunderbird 91.7.0 also on lsb_release -rd Description: Fedora release 35 (Thirty Five) Release: 35 mail is delivered to the store via lmtp transport from a Postfix agent mail, with attachments (e.g., .PDF) is received OK it's readable, attachments can be opened and/or saved to disk\ if, in TBird client, i move the message to any other folder in the IMAP hierarchy, the message relocates, as expected. the message itself is still readable, and _appears_ to have the attachment. but, attempting to OPEN the *attachment*, with e.g. Okular, from within the relocated message pops up a dialog, "Could not open file:///tmp/pid-28435/manual_13542AE.pdf" and saving it to Desktop, ls -al manual_13542AE.pdf -rw-r--r-- 1 pgnd pgnd 27 Apr 1 06:01 manual_13542AE.pdf file manual_13542AE.pdf manual_13542AE.pdf: data then opening it similarly returns "Could not open file:///home/pgnd/Desktop/manual_13542AE.pdf." Moving the message, via TBird, **BACK** to the Inbox, cures the problem -- -- I can immediately, again, open & save the attachments. This 'feels' like cache management misconfiguration to me. Not sure whether in Tbird &/or Dovecot, or what to look for specificially. Hints as to cause/fix of this attachment issue? Or event what/where, specifically, to log?

4 12

doveadm mailbox status -u paul@scom.ca -t all (syntax)
by Paul Kudla (SCOM.CA Internet Services Inc.) 24 May '22

24 May '22

Ok I know this is a general question and at my level I should be able to figure this out all i want is the complete status of an inbox ? # doveadm mailbox status -u paul(a)scom.ca -t all keeps returning .... doveadm mailbox status [-u <user>|-A] [-S <socket_path>] <fields> <mailbox> [...] ie no specific error. and no status answer just looking for default info ? -- Happy Monday !!! Thanks - paul Paul Kudla Scom.ca Internet Services <http://www.scom.ca> 004-1009 Byron Street South Whitby, Ontario - Canada L1N 4S3 Toronto 416.642.7266 Main 1.866.411.7266 Fax 1.888.892.7266 Email paul(a)scom.ca

3 5

enable/control fts-tika debug logging in Dovecot 2.3.18 + Tika Server 2.4.0?
by PGNet Dev 24 May '22

24 May '22

i run dovecot-2.3.18-1.fc36.x86_64 i've installed Apache Tika, v 2.4.0 ls -al tika-server-standard-2.4.0.jar -rw-r--r-- 1 root root 59M May 2 09:53 tika-server-standard-2.4.0.jar tika's listening telnet 127.0.0.1 9998 Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. telnet> and responds to a test curl \ -T /tmp/test.pdf \ http://127.0.0.1:9998/meta pdf:unmappedUnicodeCharsPerPage,0,0,0,0,0,0,0,0,0,0,0,0,0,0 pdf:PDFVersion,1.4 xmp:CreatorTool,Adobe InDesign 15.1 (Macintosh) pdf:hasXFA,false access_permission:modify_annotations,true access_permission:can_print_degraded,true X-TIKA:Parsed-By-Full-Set,org.apache.tika.parser.DefaultParser,org.apache.tika.parser.pdf.PDFParser dcterms:created,2020-08-13T14:55:46Z language,en dcterms:modified,2020-09-24T23:38:28Z dc:format,application/pdf; version=1.4 xmpMM:DocumentID,xmp.id:8a612346-9d03-4caf-8ebf-da6f3716ed0a pdf:docinfo:creator_tool,Adobe InDesign 15.1 (Macintosh) access_permission:fill_in_form,true pdf:docinfo:modified,2020-09-24T23:38:28Z pdf:hasCollection,false pdf:encrypted,false pdf:hasMarkedContent,true Content-Type,application/pdf dc:language,en-US pdf:producer,Adobe PDF Library 15.0 access_permission:extract_for_accessibility,true access_permission:assemble_document,true xmpTPg:NPages,14 pdf:hasXMP,true pdf:charsPerPage,84,676,1653,1914,814,1022,645,1221,1087,732,887,1295,1263,149 access_permission:extract_content,true xmpMM:DerivedFrom:DocumentID,xmp.did:b98726d4-04c4-48f5-88be-0a48a0074356 access_permission:can_print,true pdf:docinfo:trapped,false X-TIKA:Parsed-By,org.apache.tika.parser.DefaultParser,org.apache.tika.parser.pdf.PDFParser xmpMM:DerivedFrom:InstanceID,xmp.iid:3dd6a91f-a114-4d63-804e-e2b749c15075 pdf:annotationTypes,null access_permission:can_modify,true pdf:docinfo:producer,Adobe PDF Library 15.0 pdf:docinfo:created,2020-08-13T14:55:46Z pdf:annotationSubtypes,Link in dovecot config, i've added plugin { fts_tika = http://127.0.0.1:9998/tika/ } and log_debug = (category=fts-flatcurve OR category=fts-tika) on message receipt, I see verbose logs for fts-flatcurve, as expected, but not a trace of output from fts-tika, in dovecot logs how to correctly turn on debug/verbose logging for fts-tika use in/by dovecot?

2 2

Many Thanks to the Programmers
by Paul Kudla (SCOM.CA Internet Services Inc.) 23 May '22

23 May '22

I am still in testing mode with 2.3.19 but the replication with the folders over 300+ seems to be fixed everything synced ok on its own within 30 minutes Again MUSH APPRECIATED ! Moving to 2.3.19 was woth it! -- Happy Monday !!! Thanks - paul Paul Kudla Scom.ca Internet Services <http://www.scom.ca> 004-1009 Byron Street South Whitby, Ontario - Canada L1N 4S3 Toronto 416.642.7266 Main 1.866.411.7266 Fax 1.888.892.7266 Email paul(a)scom.ca

1 0