February 2023 - dovecot

Restored mail folders conflict with renamed original ones
by Nikolaos Milas 24 Feb '23

24 Feb '23

Hello, We are running Dovecot 2.3.18 (together with Postfix) on CentOS 7. It uses a Maildir structure. We have a user who has organized his mailbox as shows up at the end of this mail. The user had forgotten that he had renamed his "Grants Active \ European" (.Grants Active.European) folder to "Grants Active \ International" (.Grants Active.International), he thought that it was lost and requested a restore of "Grants Active \ European" (with all of its subfolders) from backup. Since we did that (using a simple "cp -rp" from a backup, observing timestamps, ownership and permissions), mail client software won't see "European" mail folder in "Grants Active" mail folder; "International" mail folder shows up but only with two folders, those which do not exist in "European" branch (obviously, these were created later). I have tried to run the command "doveadm index -u userx Grants\ Active" and likewise for each and every mail subfolder under "Grants\ Active"; I have also tried deleting the dovecot.index.cache and dovecot.index.log from the latter ("Grants\ Active") and then run: doveadm -vD force-resync -u userx Grants\ Active but it didn't do the trick: Mail clients are still stuck as I explained. In the end, I thought that the snag might be that mail folders that are not appearing have identical (duplicate) UIDs; As an example: [root@mailx .Grants Active.European]# cat dovecot-uidlist 3 V1548680759 N1 G64e70a1130343f61003c0000715faa8d [root@mailx .Grants Active.European]# cd .. [root@mailx Maildir]# cd .Grants\ Active.International [root@mailx .Grants Active.International]# cat dovecot-uidlist 3 V1548680759 N1 G64e70a1130343f61003c0000715faa8d If so, how should we overcome this issue? I guess I could simply delete the restored folders to return to an acceptable state? If nevertheless we need to restore the ".European" mail folder from a backup (as it was before getting renamed), what would be the right way to do so? Is there another way to resolve the issue without deleting the restored mail folders? Here is the list of mail folders in this mailbox (I have intentionally removed lots of them, to reduce irrelevant content; this mailbox includes a large number of mail folders): # doveadm mailbox list -u userx IGARSS 2024 IAC2022 Junk ... Junk E-mail INBOX.EMISSION ... Trash Trash.Equality Trash.sadf ... Grants Active Grants Active.European Grants Active.European.URBAN RELEAF Grants Active.European.SMURBS Grants Active.European.SMURBS.In Kind Grants Active.European.SMURBS.Final Reports Grants Active.European.RI-URBANS Grants Active.European.QA4EO Grants Active.European.ATMO-ACCESS Grants Active.European.IGOSP Grants Active.European.GAUSS Grants Active.European.E-SHAPE Grants Active.European.CIROCCO Grants Active.European.InCASE Grants Active.European.EIFFEL Grants Active.European.ARSINOE Grants Active.International Grants Active.International.2324 Grants Active.International.GAUSS Grants Active.International.CIROCCO Grants Active.International.IGOSP Grants Active.International.ATMO-ACCESS Grants Active.International.URBAN RELEAF Grants Active.International.InCASE Grants Active.International.ARSINOE Grants Active.International.RI-URBANS Grants Active.International.E-SHAPE Grants Active.International.EIFFEL Grants Active.International.QA4EO Grants Active.International.SMURBS Grants Active.International.SMURBS.Final Reports Grants Active.International.SMURBS.In Kind Grants Active.International.India Grants Active.Urban ReLeaf Grants Active.National Grants Active.National.ΑΓ ΠΑΡΑΣΚΕΥΗ Grants Active.National.ΠΕΤΡΟΥΠΟΛΗ Grants Active.National.CLIMATTICA Grants Active.National.ΝΑΥΠΛΙΟ Grants Active.National.ΕΔΒΜ Grants Active.National.PANGEA Grants Active.National.ΕΛΙΔΕΚ Grants Active.National.ΕΛΙΔΕΚ.OXONIAN - Δέσποινα Grants Active.National.ΕΛΙΔΕΚ.Νασια PhD Grants Active.National.CLIMPACT Sent ... INBOX Please, provide some guidance on what we should do to make these mail folders work correctly again. Sorry, I am not very knowledgeable on mail inner architecture and operations; please let me know if you need additional info. Thanks in advance, Nick

2 6

How to get a server listed in the IMAP Test wiki?
by Leander Beernaert 24 Feb '23

24 Feb '23

Hey, We recently announced Gluon (https://github.com/ProtonMail/gluon/) our IMAP server library we are using in Proton Bridge(https://github.com/ProtonMail/proton-bridge). We would love to have it have it listed in the IMAP Server Compliancy Status wiki page (https://imapwiki.org/ImapTest/ServerStatus) What do we need to do or whom do we need to contact to make this happen? Additionally, We have been using running imaptest (https://github.com/dovecot/imaptest) against our server library, but due to variety of configuration parameters, we would really appreciate it (if possible) if someone could point out to us the test setup used to validate each of those servers. Thank you in advance for your time. Kind Regards, Leander Beernaert Proton AG

4 6

creating a mailbox via imap
by Gabriele Bulfon 23 Feb '23

23 Feb '23

Hi, is there any way with Dovecot to open an admin imap connection and create a brand new mailbox? With Cyrus imapd I can do this by connecting as the Cyrus admin user and then create a folder "user/newuser(a)domain.tld". Thanks Gabriele Sonicle S.r.l. : http://www.sonicle.com Music: http://www.gabrielebulfon.com eXoplanets : https://gabrielebulfon.bandcamp.com/album/exoplanets

3 2

doveadm sending invalid AUTHENTICATE to uw-imap
by Chris Candreva 23 Feb '23

23 Feb '23

I'm migrating a legacy uw-imap system to Dovecot, on a Rocky (RHEL) 8 server running Dovecot 2.3.16-3 from their repos. I am using a master user to import all users for an imaps connection from the old server to the new. On a trial run however, it worked for about half the users. Half are giving an error of the form: dsync(user): Error: imapc(host:993): Command '1 AUTHENTICATE PLAIN xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx' failed with BAD: 1 Missing or invalid argument to AUTHENTICATE I can't seem to get the IMAP command for the users that did work. However, on the face of it, that is an invalid AUTHENTICATE command. If I take that string and brake it up into (what I've googled is) the proper form of multi-command form of 1 AUTHENTICATE PLAIN + xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx then the login succeeds. I have not been able to find anyone else with this problem in my search. Is this a known issue, is there a way to force the multi-line AUTHENTICATE, something else I'm missing ? Any help is appreciate on this! -Chris -- --- ======================================================================== Chris Candreva -- chris(a)westnet.com -- http://www.westnet.com/~chris

3 4

Redundant Database, Pgsql ?
by Paul Kudla 23 Feb '23

23 Feb '23

I am aware that there are provising for redundant database connections Basically i was working on my main db server (which is also a mail sever) I current have this in the dovecot-pgsql.conf ______________________________________________________________________ driver = pgsql connect = host=localhost port=5433 dbname=scom_billing user=pgsql password=xxxxxxxxx default_pass_scheme = PLAIN password_query = SELECT username as user, password FROM email_users WHERE username = '%u' and password <> 'alias' and status = True and destination = '%u' user_query = SELECT home, uid, gid FROM email_users WHERE username = '%u' and password <> 'alias' and status = True and destination = '%u' #iterate_query = SELECT user, password FROM email_users WHERE username = '%u' and password <> 'alias' and status = True and destination = '%u' iterate_query = SELECT "username" as user, domain FROM email_users WHERE status = True and alias_flag = False _______________________________________________________________________ Basically I have replicaed servers all over the place but mail18 (because dovecot only knows of one db instance) went down as well. May I please get some guidance on what to add to talk to another postgresql server (i have 6 replicated servers so would probably want a couple worst case issue) -- Happy Sunday !!! Thanks - paul Paul Kudla Scom.ca Internet Services <http://www.scom.ca> 004-1009 Byron Street South Whitby, Ontario - Canada L1N 4S3 Toronto 416.642.7266 Main 1.866.411.7266 Fax 1.888.892.7266 Email paul(a)scom.ca

10 13

Can I encrypt already existant unencrypted mail before I start using the mail-crypt plugin?
by mailinglist-subscriptions 23 Feb '23

23 Feb '23

Hi, I am using dovecot 2.3.16, along with postfix and a PostgreSQL database for managing virtual accounts. I'd like to start using the mail-crypt plugin. However, I'm having a bit some difficulty understanding the documentation at https://doc.dovecot.org/configuration_manual/mail_crypt_plugin to reach my goal. I plan to ask questions about those issues by starting new threads in this mailing list. But before I even come to that, I'd like to investigate the following: The above documentation only addresses a clean install and doesn't seem to mention encrypting already existent unencrypted mails, like my server has. Is it possible to encrypt those before I start using the mail-crypt plugin, such that it will be able to decrypt those messages as well? If it is, I am assuming that how I would go about achieving that will be very dependent on the ultimate configuration I have in mind (pub/priv keys, etc.). So I don't expect a full-fledged guide. However, if you could perhaps give a general overview of what would be needed to achieve this, I would very much appreciate that. Thank you.

4 4

Re: Auth-worker, unknown scheme ARGON2ID
by James Brown 22 Feb '23

22 Feb '23

On 21 Feb 2023, at 10:12 pm, James Brown <jlbrown(a)bordo.com.au> wrote: > > The new one has Dovecot compiled with same configure options, same configuration files, but fails to authenticate: > > Feb 21 21:51:03 master: Info: Dovecot v2.3.20 (80a5ac675d) starting up for imap, pop3 (core dumps disabled) > Feb 21 21:51:33 auth-worker(11701): Error: conn unix:auth-worker (uid=214): auth-worker<1>: sql(jlbrown@bordo.com.au,::1,<bRgbkDP2udEBAAAAAAAAAAAAAAAAAAB>): Unknown scheme ARGON2ID > > ./configure --with-ssl=openssl --with-mysql > > Was what I used to compile. > > Using OpenSSL 3.0.8. New server is running macOS 13.2.1 Ventura. > > (Have also installed libsodium 1.0.18_1) > > Any help would be most appreciated. > > thanks, > > James. I’ve spent ages on this and am getting really desperate! :-( CPPFLAGS=-I/opt/homebrew/Cellar/openssl(a)3/3.0.8/include LDFLAGS=-L/opt/homebrew/opt/openssl@3/lib ./configure --with-ssl=openssl --with-mysql ... Install prefix . : /usr/local File offsets ... : 64bit I/O polling .... : kqueue I/O notifys .... : kqueue SSL ............ : yes (OpenSSL) GSSAPI ......... : no passdbs ........ : static passwd passwd-file pam checkpassword sql : -shadow -bsdauth -ldap userdbs ........ : static prefetch passwd passwd-file checkpassword sql sudo doveadm pw -l SHA1 SSHA512 SCRAM-SHA-256 BLF-CRYPT PLAIN HMAC-MD5 OTP SHA512 SHA DES-CRYPT CRYPT SSHA MD5-CRYPT PLAIN-MD4 PLAIN-MD5 SCRAM-SHA-1 CLEAR CLEARTEXT SSHA256 MD5 PBKDF2 SHA256 CRAM-MD5 PLAIN-TRUNC SMD5 DIGEST-MD5 LDAP-MD5 How do I get ARGON2I, ARGON2ID in that list? Has anybody got Dovecot to work on recent macOS with these password schemes? Any hints? Thanks, James.

2 8

Auth-worker, unknown scheme ARGON2ID
by James Brown 21 Feb '23

21 Feb '23

On my current mail server I was able to upgrade everyone’s password scheme to ARGON2ID with no issues, I just had to have: service auth { vsz_limit = 0 } This was an older version of macOS than the new server I’m trying to migrate to. The new one has Dovecot compiled with same configure options, same configuration files, but fails to authenticate: Feb 21 21:51:03 master: Info: Dovecot v2.3.20 (80a5ac675d) starting up for imap, pop3 (core dumps disabled) Feb 21 21:51:33 auth-worker(11701): Error: conn unix:auth-worker (uid=214): auth-worker<1>: sql(jlbrown@bordo.com.au,::1,<bRgbkDP2udEBAAAAAAAAAAAAAAAAAAB>): Unknown scheme ARGON2ID ./configure --with-ssl=openssl --with-mysql Was what I used to compile. Using OpenSSL 3.0.8. New server is running macOS 13.2.1 Ventura. (Have also installed libsodium 1.0.18_1) Any help would be most appreciated. thanks, James.

1 0

service(imap-login): Fatal: setrlimit(RLIMIT_DATA, 268435456): Invalid argument macOS
by James Brown 21 Feb '23

21 Feb '23

I fixed the issue with Dovecot not starting on macOS Ventura by adding this to 10-master.conf: service log { vsz_limit = 0 } But now when I try to login via Imap on port 143 I get the same error for imap-login: Feb 20 15:55:41 imap-login: Error: Feb 20 15:55:41 service(imap-login): Fatal: setrlimit(RLIMIT_DATA, 268435456): Invalid argument Feb 20 15:55:41 imap-login: Fatal: master: service(imap-login): child 11781 returned error 89 (Fatal failure) Feb 20 15:55:41 master: Error: service(imap-login): command startup failed, throttling for 60.000 secs Feb 20 16:13:04 imap-login: Error: Feb 20 16:13:04 service(imap-login): Fatal: setrlimit(RLIMIT_DATA, 268435456): Invalid argument Feb 20 16:13:04 imap-login: Fatal: master: service(imap-login): child 20370 returned error 89 (Fatal failure) Feb 20 16:13:04 master: Error: service(imap-login): command startup failed, throttling for 60.000 secs Config: sudo /usr/local/sbin/dovecot -n # 2.3.20 (80a5ac675d): /usr/local/etc/dovecot/dovecot.conf # OS: Darwin 22.3.0 arm64 apfs # Hostname: mail-server-mac-studio.local auth_mechanisms = plain login auth_verbose = yes auth_verbose_passwords = yes default_internal_group = mail default_internal_user = _dovecot default_login_user = _dovenull first_valid_gid = 0 first_valid_uid = 102 last_valid_gid = 501 last_valid_uid = 105 log_path = /var/log/dovecot.log mail_gid = 102 mail_location = maildir:/usr/local/virtual/%d/%u mail_uid = 102 namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = _postfix mode = 0660 user = _postfix } unix_listener auth-userdb { mode = 0660 user = _vmail } } service imap-login { vsz_limit = 0 } service log { vsz_limit = 0 } ssl_cert = </etc/letsencrypt/live/mail.bordo.com.au/fullchain.pem ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { driver = prefetch } userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol imap { mail_max_userip_connections = 40 } Quitting Dovecot and restarting and I now get: Feb 20 17:01:11 master: Info: Dovecot v2.3.20 (80a5ac675d) starting up for imap, pop3 (core dumps disabled) Feb 20 17:01:11 master: Error: service(anvil): command startup failed, throttling for 2.000 secs Then trying to connect on port 143 log says: Feb 20 17:20:08 master: Error: service(config): command startup failed, throttling for 2.000 secs Feb 20 17:20:08 config: Error: Feb 20 17:20:08 service(config): Fatal: setrlimit(RLIMIT_DATA, 268435456): Invalid argument Feb 20 17:20:08 anvil: Fatal: master: service(anvil): child 43250 returned error 89 (Fatal failure) Feb 20 17:20:08 config: Fatal: master: service(config): child 52530 returned error 89 (Fatal failure) Feb 20 17:20:08 stats: Fatal: master: service(stats): child 52531 returned error 89 (Fatal failure) Feb 20 17:20:08 stats: Error: Feb 20 17:20:08 service(stats): Fatal: setrlimit(RLIMIT_DATA, 268435456): Invalid argument Feb 20 17:20:08 master: Error: service(stats): command startup failed, throttling for 2.000 secs Feb 20 17:20:10 config: Error: Feb 20 17:20:10 service(config): Fatal: setrlimit(RLIMIT_DATA, 268435456): Invalid argument Feb 20 17:20:10 config: Fatal: master: service(config): child 52532 returned error 89 (Fatal failure) Feb 20 17:20:10 master: Error: service(config): command startup failed, throttling for 4.000 secs Feb 20 17:20:10 imap-login: Fatal: Error reading configuration: read(/usr/local/var/run/dovecot/config) failed: EOF - Also failed to read config by executing doveconf: /usr/local/var/run/dovecot/config is a UNIX socket (path is from CONFIG_FILE environment) Feb 20 17:20:10 master: Error: service(imap-login): command startup failed, throttling for 2.000 secs Any suggestions? This is really driving me crazy! thanks, James.

2 1

Get correct subjects in summary but wrong article body after transitioning between servers
by Steinar Bang 19 Feb '23

19 Feb '23

I am transitioning between servers (both debian 11.6 with dovecot 2.3.13) and I'm seeing some strange behaviour after the transition: it seems like dovecot is listing the correct subject for the test messages I'm sending in what's shown in my MUA's summary. But the body of the message is an old message. Dovecot is serving messages from Maildir folders in the users' home directories. And I may have messed up some things here: I rsynced the maildirs and then still got some deliveries both places when the MX records were in transition, so I did a belated rsync, thinking that "Maildir can handle that". But I weren't thinking about the dovecot files, ie: drwx------ 2 sb sb 155648 Feb 11 06:43 cur -rw------- 1 sb sb 30 Nov 23 18:14 dovecot-keywords -rw------- 1 sb sb 116407 Feb 11 06:43 dovecot-uidlist -rw------- 1 sb sb 8 Feb 28 2022 dovecot-uidvalidity -rw------- 1 sb sb 0 Mar 17 2011 dovecot-uidvalidity.4d821095 -rw------- 1 sb sb 38016 Jan 31 15:38 dovecot.index -rw------- 1 sb sb 203852 Feb 5 21:37 dovecot.index.cache -rw------- 1 sb sb 15076 Feb 11 06:43 dovecot.index.log -rw------- 1 sb sb 6424 Feb 4 08:06 dovecot.list.index -rw------- 1 sb sb 7796 Feb 11 06:43 dovecot.list.index.log -rw------- 1 sb sb 3048 Mar 6 2022 dovecot.mailbox.log drwx------ 2 sb sb 4096 Feb 11 06:43 new -rw------- 1 sb sb 738 Mar 6 2022 subscriptions drwx------ 2 sb sb 4096 Feb 6 22:05 tmp Are there any of these that could have been adversely affected by the rsync? Will regenerating these files fix the behaviour where I get the wrong article when fetching them? What is the best way to regenerate them? Can these feil be safely deleted and will be autogenerated? (I also see that some of these files are quite old. I had another server transition in 2017, so the files from 2011 has been rsynced into that server and not touched since) Thanks! - Steinar

1 2