January 2024 - dovecot

Forcing imap authentication failure for certain IP addresses
by Hippo Man 20 Jan '24

20 Jan '24

I'm running dovecot 2.3.18 under Debian 11. I want to do something that's a bit unusual: when IMAP connections are attempted from a few specific IP addresses, I want to force an IMAP authentication failure from those connections, no matter what user ID and password are specified. I know that I can use iptables to completely block imap access from those IP addresses to the IMAP ports. However, in these specific cases, I'd prefer that the connection goes through to dovecot, but for dovecot then to always generate authentication failures for those specific connections ... even if a valid user ID and password happen to be specified. Is there a way to do this in dovecot? Thank you very much in advance. -- hippoman(a)gmail.com Take a hippopotamus to lunch today. .---------, 0__0 / ( oo'---, / oo\ ,\ | | \ ,=__/ \ / / /------| /| |__|-' |__|'

2 1

Documentation flaw: man-page link.
by Ralph Corderoy 19 Jan '24

19 Jan '24

Hi, https://doc.dovecot.org/admin_manual/doveadm_mailbox_commands/ ends with The man-pages also contain good descriptions of doveadm commands. Man-pages can be accessed online at e.g. https://wiki.dovecot.org/Tools/Doveadm That wiki page says Our primary documentation is now at https://doc.dovecot.org, please update your links. But I was at https://doc.dovecot.org to start with and there is no obvious mention of man pages there. This needs tidying up to avoid the loop and ideally provide man pages. -- Cheers, Ralph.

3 3

post-login scripting
by Alex 19 Jan '24

19 Jan '24

Hi, I'm trying to determine the last login time for my IMAP users. Some systems use mbox while others are Maildir, but not sure that matters. I'd just like to touch a file similar to how it's done in this article, but it doesn't work for me. https://doc.dovecot.org/admin_manual/post_login_scripting/ I've followed the instructions explicitly - made the required changes to 10-master.conf and created a shell script in /usr/local/bin that touches a file in the user's home directory. However, the file doesn't get created/touched. I've enabled debugging and don't see any errors that might lead to what I'm doing wrong. It doesn't say explicitly in the article that the last-login script referenced in the article is actually the contents of the postlogin.sh script, but I'm assuming it is? When I put the following in my dovecot.conf instead of conf.d/10-auth.conf, it core dumps. I thought local changes should be made in dovecot.conf? service imap-login { executable = imap imap-postlogin inet_listener imap { port = 0 } inet_listener imaps { port = 993 } process_min_avail = 6 service_count = 0 vsz_limit = 512 M } service imap-postlogin { executable = script-login /usr/local/bin/postlogin.sh user = $default_internal_user } service pop3-login { inet_listener pop3 { port = 0 } inet_listener pop3s { port = 995 } } Hi, I'm trying to determine the last login time for my IMAP users. Some systems use mbox while others are Maildir, but not sure that matters. I'd just like to touch a file similar to how it's done in this article, but it doesn't work for me. https://doc.dovecot.org/admin_manual/post_login_scripting/ I've followed the instructions explicitly - made the required changes to 10- master.conf and created a shell script in /usr/local/bin that touches a file in the user's home directory. However, the file doesn't get created/touched. I've enabled debugging and don't see any errors that might lead to what I'm doing wrong. It doesn't say explicitly in the article that the last-login script referenced in the article is actually the contents of the postlogin.sh script, but I'm assuming it is? When I put the following in my dovecot.conf instead of conf.d/10-auth.conf, it core dumps. I thought local changes should be made in dovecot.conf? service imap-login { executable = imap imap-postlogin inet_listener imap { port = 0 } inet_listener imaps { port = 993 } process_min_avail = 6 service_count = 0 vsz_limit = 512 M } service imap-postlogin { executable = script-login /usr/local/bin/postlogin.sh user = $default_internal_user } service pop3-login { inet_listener pop3 { port = 0 } inet_listener pop3s { port = 995 } }

4 7

Re: What is the difference between BEFORE, SENTBEFORE, and SAVEDBEFORE?
by Joseph Tam 19 Jan '24

19 Jan '24

From: Paul Pace <paul(a)mostlybsd.com> > BEFORE date specification > Matches messages with an internal date before date > specification. > > SENTBEFORE date specification > Matches messages with a Date: header before date specification. > > SAVEDBEFORE date specification > Matches messages, which were saved before date specification. > > I am creating a cron job to purge old messages in Trash or Spam folders, > but I discovered using doveadm search queries using savedbefore that > somehow no message in any of the folders shows up with queries starting > at 5d, even though there are much older messages. I don't know exactly the answer to your query, but the semantics of each term may not be the problem. I had this exact problem a decade ago with my own trash purging script. If you dump the above values e.g. doveadm fetch -ftab -A 'mailbox date.received' mailbox Trash BEFORE 90d you may find that many of them have the same value, and what's more, the time coincides with the first time you queried for that value (i.e. when you ran the above doveadm fetch). I think these fields may not have cached values before you ask for it, then it gets instantiated the current timestamp when you do. If you do a fetch every day, you'll eventually reach 90d, and it will work forever more (+/- 1 day). Perhaps adding those fields into these settings is a more direct and better solution: https://doc.dovecot.org/configuration_manual/mail_cache_settings/ Joseph Tam <jtam.home(a)gmail.com>

1 1

What is the difference between BEFORE, SENTBEFORE, and SAVEDBEFORE?
by Paul Pace 19 Jan '24

19 Jan '24

In doveadm-search-query(7), it states: BEFORE date specification Matches messages with an internal date before date specification. SENTBEFORE date specification Matches messages with a Date: header before date specification. SAVEDBEFORE date specification Matches messages, which were saved before date specification. I am creating a cron job to purge old messages in Trash or Spam folders, but I discovered using doveadm search queries using savedbefore that somehow no message in any of the folders shows up with queries starting at 5d, even though there are much older messages. doveadm search mailbox Trash before 90d -A | wc -l 277 doveadm search mailbox Trash sentbefore 90d -A | wc -l 277 doveadm search mailbox Trash savedbefore 90d -A | wc -l 0 For my purpose, I'm not clear on the differences between the different queries and am wondering what will be the better option. Thank you, Paul

1 0

testing sieve/pigeonhole, auth errors
by Joe Acquisto 18 Jan '24

18 Jan '24

A small SOHO system, of installed perhaps a year. Seems to be working and wished to add pigeonhole/sieve. Per Pigeonhole/sieve troubleshooting in the docs, set on mail_debug = yes and this is what I see, upon launching Thunderbird as the client. Thought that "unknown user" and "permission denied" deserved attention before any other steps. Just the dialog for one user is pasted below. pid 475 is dovecot,vmail for dovecot imapd This is what I see for /proc/self/io blah #ll /proc/self/io -r-------- 1 root root 0 Jan 15 15:10 /proc/self/io Jan 15 14:53:35 auth-worker(22903): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<1>: pam(me(a)here.com,192.168.11.166,<RbZgXgEPUKbAqAum>): unknown user Jan 15 14:53:35 auth-worker(22901): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<4>: passwd(me(a)here.com,192.168.11.166,<RbZgXgEPUKbAqAum>): unknown user Jan 15 14:53:35 imap-login: Info: Login: user=<me(a)here.com>, method=PLAIN, rip=192.168.11.166, lip=192.168.0.225, mpid=22907, session=<RbZgXgEPUKbAqAum> Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: Effective uid=100, gid=1000, home=/home/vmail/me(a)here.com Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: open(/proc/self/io) failed: Permission denied Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/ Maildir Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: maildir++: root=/home/vmail/me(a)here.com/Maildir, index=, indexpvt=, control=, inbox=/home/vmail/joea@j4com puters.com/Maildir, alt= Jan 15 14:53:35 auth-worker(22904): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<1>: pam(me(a)here.com,192.168.11.166,<d7VgXgEPTqbAqAum>): unknown user Jan 15 14:53:35 auth-worker(22901): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<5>: passwd(me(a)here.com,192.168.11.166,<d7VgXgEPTqbAqAum>): unknown user Jan 15 14:53:35 imap-login: Info: Login: user=<me(a)here.com>, method=PLAIN, rip=192.168.11.166, lip=192.168.0.225, mpid=22908, session=<d7VgXgEPTqbAqAum> Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: Effective uid=100, gid=1000, home=/home/vmail/me(a)here.com Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: open(/proc/self/io) failed: Permission denied Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/ Maildir Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: maildir++: root=/home/vmail/me(a)here.com/Maildir, index=, indexpvt=, control=, inbox=/home/vmail/joea@j4com puters.com/Maildir, alt= Jan 15 14:53:36 imap(joea(a)acquisto-us.com)<22906><fwJdXgEPQKbAqAum>: Debug: Mailbox INBOX: Mailbox opened Jan 15 14:53:36 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: Mailbox INBOX: Mailbox opened Jan 15 14:53:37 imap(joea(a)acquisto-us.com)<22906><fwJdXgEPQKbAqAum>: Debug: Mailbox INBOX: UID 13710: Opened mail because: prefetch A small SOHO system, of installed perhaps a year. Seems to be working and wished to add pigeonhole/sieve. Per Pigeonhole/sieve troubleshooting in the docs, set on mail_debug = yes and this is what I see, upon launching Thunderbird as the client. Thought that "unknown user" and "permission denied" deserved attention before any other steps. Just the dialog for one user is pasted below. pid 475 is dovecot,vmail for dovecot imapd This is what I see for /proc/self/io blah # ll /proc/self/io -r-------- 1 root root 0 Jan 15 15:10 /proc/self/io Jan 15 14:53:35 auth-worker(22903): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<1>: pam (me(a)here.com,192.168.11.166,<RbZgXgEPUKbAqAum>): unknown user Jan 15 14:53:35 auth-worker(22901): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<4>: passwd (me(a)here.com,192.168.11.166,<RbZgXgEPUKbAqAum>): unknown user Jan 15 14:53:35 imap-login: Info: Login: user=<me(a)here.com>, method=PLAIN, rip=192.168.11.166, lip=192.168.0.225, mpid=22907, session=<RbZgXgEPUKbAqAum> Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: Effective uid=100, gid=1000, home=/home/vmail/me(a)here.com Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: open(/proc/ self/io) failed: Permission denied Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/ Maildir Jan 15 14:53:35 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: maildir++: root=/home/vmail/me(a)here.com/Maildir, index=, indexpvt=, control=, inbox=/home/ vmail/joea@j4com puters.com/Maildir, alt= Jan 15 14:53:35 auth-worker(22904): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<1>: pam (me(a)here.com,192.168.11.166,<d7VgXgEPTqbAqAum>): unknown user Jan 15 14:53:35 auth-worker(22901): Info: conn unix:auth-worker (pid=22897,uid=475): auth-worker<5>: passwd (me(a)here.com,192.168.11.166,<d7VgXgEPTqbAqAum>): unknown user Jan 15 14:53:35 imap-login: Info: Login: user=<me(a)here.com>, method=PLAIN, rip=192.168.11.166, lip=192.168.0.225, mpid=22908, session=<d7VgXgEPTqbAqAum> Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: Effective uid=100, gid=1000, home=/home/vmail/me(a)here.com Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: open(/proc/ self/io) failed: Permission denied Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/ Maildir Jan 15 14:53:35 imap(me(a)here.com)<22908><d7VgXgEPTqbAqAum>: Debug: maildir++: root=/home/vmail/me(a)here.com/Maildir, index=, indexpvt=, control=, inbox=/home/ vmail/joea@j4com puters.com/Maildir, alt= Jan 15 14:53:36 imap(joea(a)acquisto-us.com)<22906><fwJdXgEPQKbAqAum>: Debug: Mailbox INBOX: Mailbox opened Jan 15 14:53:36 imap(me(a)here.com)<22907><RbZgXgEPUKbAqAum>: Debug: Mailbox INBOX: Mailbox opened Jan 15 14:53:37 imap(joea(a)acquisto-us.com)<22906><fwJdXgEPQKbAqAum>: Debug: Mailbox INBOX: UID 13710: Opened mail because: prefetch

3 4

Re: [EXT] Re: Dovecot imap-hibernate errors in 2.3.21
by Aki Tuomi 18 Jan '24

18 Jan '24

Can you send `doveconf -n`? I think it might be related to the separete user accounts somehow. Aki > On 18/01/2024 09:45 EET Lucas Rolff <lucas(a)lucasrolff.com> wrote: > > > SELinux runs in permissive mode on the system (so doesn't take action, and no violations are logged either), the OS specifically is Oracle Linux 8.9, the only main thing that differs from RHEL or eg rocky/almalinux is I use the newer oracle kernel they release, but shouldn't have any effect > > > The only "special" thing being that mail users are isolated on their own Linux user (a domain will result in a local Linux user being created), but that's about it. > There's nothing with eg virtualized file systems or anything like that, that would result in per user mount points as well > > > Sent from Outlook for iOS (https://aka.ms/o0ukef) > ------------------------------ > From: Aki Tuomi <aki.tuomi(a)open-xchange.com> > Sent: Thursday, January 18, 2024 8:37:07 AM > To: Lucas Rolff <lucas(a)lucasrolff.com>; dovecot(a)dovecot.org <dovecot(a)dovecot.org> > Subject: Re: Dovecot imap-hibernate errors in 2.3.21 > Did you check if maybe selinux is interfering here? I tested the 2.3.21-CE in a RHEL7 VM and hibernation seems to work there. > > Aki > > > On 17/01/2024 22:51 EET lucas(a)lucasrolff.com wrote: > > > > > > Thanks for your reply Aki! > > > > It doesn't seem to contain much more information sadly that points towards anything related to hibernate itself. > > "Debug: open(/proc/self/io) failed: Permission denied" being the main "thing" that seems a bit odd, but that also happens under 2.3.20 as well by the looks of it: > > > > ``` > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap-login: Login: user=<customer(a)example.com>, method=PLAIN, rip=193.36.xx.xx, lip=176.9.151.xxx, mpid=3631534, TLS, session=<JVYMV8gOq5vBJIOe> > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Loading modules from directory: /usr/lib64/dovecot > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Module loaded: /usr/lib64/dovecot/lib10_quota_plugin.so > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Module loaded: /usr/lib64/dovecot/lib11_imap_quota_plugin.so > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Module loaded: /usr/lib64/dovecot/lib20_fts_plugin.so > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Module loaded: /usr/lib64/dovecot/lib20_quota_clone_plugin.so > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Module loaded: /usr/lib64/dovecot/lib20_zlib_plugin.so > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Module loaded: /usr/lib64/dovecot/lib21_fts_solr_plugin.so > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Added userdb setting: mail=mdbox:~/mail/example.com/customer/ > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Added userdb setting: plugin/quota_rule=*:bytes=10240M > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Effective uid=1098, gid=1098, home=/home/username/ > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Quota root: name=User quota backend=count args= > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Quota rule: root=User quota mailbox=* bytes=10737418240 messages=0 > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Quota grace: root=User quota bytes=1073741824 (10%) > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: dict(proxy): dict created (uri=proxy::sqlquota, base_dir=/run/dovecot) > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: open(/proc/self/io) failed: Permission denied > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:~/mail/example.com/customer/ > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: fs: root=/home/username//mail/example.com/customer, index=, indexpvt=, control=, inbox=, alt= > > Jan 17 20:42:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: quota: quota_over_flag check: quota_over_script unset - skipping > > Jan 17 20:42:17 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Mailbox INBOX: Mailbox opened > > Jan 17 20:42:17 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Mailbox INBOX: Mailbox opened > > Jan 17 20:42:49 de-mail01 dovecot[3631433]: imap-hibernate: Error: conn unix:imap-hibernate (pid=3631534,uid=1098): IMAP client fd not received > > Jan 17 20:42:49 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Error: Couldn't hibernate imap client: /run/dovecot/imap-hibernate disconnected > > Jan 17 20:43:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Mailbox INBOX: Mailbox opened > > Jan 17 20:43:49 de-mail01 dovecot[3631433]: imap-hibernate: Error: conn unix:imap-hibernate (pid=3631534,uid=1098): IMAP client fd not received > > Jan 17 20:43:49 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Error: Couldn't hibernate imap client: /run/dovecot/imap-hibernate disconnected > > Jan 17 20:44:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Mailbox INBOX: Mailbox opened > > Jan 17 20:44:49 de-mail01 dovecot[3631433]: imap-hibernate: Error: conn unix:imap-hibernate (pid=3631534,uid=1098): IMAP client fd not received > > Jan 17 20:44:49 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Error: Couldn't hibernate imap client: /run/dovecot/imap-hibernate disconnected > > Jan 17 20:45:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Mailbox INBOX: Mailbox opened > > Jan 17 20:45:49 de-mail01 dovecot[3631433]: imap-hibernate: Error: conn unix:imap-hibernate (pid=3631534,uid=1098): IMAP client fd not received > > Jan 17 20:45:49 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Error: Couldn't hibernate imap client: /run/dovecot/imap-hibernate disconnected > > Jan 17 20:46:16 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Debug: Mailbox INBOX: Mailbox opened > > Jan 17 20:46:49 de-mail01 dovecot[3631433]: imap-hibernate: Error: conn unix:imap-hibernate (pid=3631534,uid=1098): IMAP client fd not received > > Jan 17 20:46:49 de-mail01 dovecot[3631433]: imap(customer(a)example.com)<3631534><JVYMV8gOq5vBJIOe>: Error: Couldn't hibernate imap client: /run/dovecot/imap-hibernate disconnected > > ``` > > > > Best Regards, > > Lucas Rolff > > _______________________________________________ > > dovecot mailing list -- dovecot(a)dovecot.org > > To unsubscribe send an email to dovecot-leave(a)dovecot.org >

1 0

Dovecot imap-hibernate errors in 2.3.21
by lucas＠lucasrolff.com 18 Jan '24

18 Jan '24

Hello, I recently upgraded a Dovecot install from 2.3.20 to 2.3.21 from the 2.3-latest repository ( http://repo.dovecot.org/ce-2.3-latest/rhel/$releasever/RPMS/$basearch ) However since then, I seem to be getting: Jan 13 01:08:32 mail01 dovecot[3646235]: imap-login: Login: user=<user(a)example.com>, method=PLAIN, rip=35.243.xxx.xxx, lip=176.9.xxx.xxx, mpid=3646265, TLS, session=<o9jJlMgOFzMj86dT> Jan 13 01:09:03 mail01 dovecot[3646235]: imap-hibernate: Error: conn unix:imap-hibernate (pid=3646265,uid=1010): IMAP client fd not received Jan 13 01:09:03 mail01 dovecot[3646235]: imap(user(a)example.com)<3646265><o9jJlMgOFzMj86dT>: Error: Couldn't hibernate imap client: /run/dovecot/imap-hibernate disconnected This seems to be the case for every email-account on the system. Related configs: 20-imap.conf: protocol imap { imap_hibernate_timeout = 30s imap_idle_notify_interval = 24 mins mail_plugins = $mail_plugins imap_quota quota_clone zlib fts fts_solr mail_max_userip_connections = 20 } 10-master.conf: service imap { # Most of the memory goes to mmap()ing files. You may need to increase this # limit if you have huge mailboxes. #vsz_limit = $default_vsz_limit unix_listener imap-master { user = $default_internal_user } extra_groups = $default_internal_group } service imap-hibernate { unix_listener imap-hibernate { mode = 0660 group = $default_internal_group } } 10-metrics.conf event_exporter log { format = json format_args = time-rfc3339 transport = log } metric hibernation_logging { exporter = log filter = event=imap_client_hibernated OR event=imap_client_unhibernated } socket: $ stat /run/dovecot/imap-hibernate File: /run/dovecot/imap-hibernate Size: 0 Blocks: 0 IO Block: 4096 socket Device: 19h/25d Inode: 48551407 Links: 1 Access: (0660/srw-rw----) Uid: ( 0/ root) Gid: ( 97/ dovecot) Context: system_u:object_r:dovecot_var_run_t:s0 Access: 2024-01-13 01:03:07.432084831 +0100 Modify: 2024-01-13 00:50:56.394662577 +0100 Change: 2024-01-13 00:50:56.394662577 +0100 Birth: - From the change log, I see the following: - imap-hibernate: If an IMAP client unhibernation timed out with "(version received)", the unhibernation could still have successfully finished later on and continued working normally. This was rather confusing, because imap-hibernate already logged that the client got disconnected. Avoid this by forcing the connection to shutdown on unhibernation timeout. By the looks of it, it seems hibernation never actually happens anymore as of the new version. Downgrading to version 2.3.20 again seems to make hibernation function again based on the event logs. In 2.3.21 I only see events being logged for `imap_client_hibernated` which matches the /run/dovecot/imap-hibernate disconnected: "error":"/run/dovecot/imap-hibernate disconnected" In 2.3.20 I get both imap_client_hibernated and imap_client_unhibernated events (that it happens and when idle_done is triggered). Thank you in advance!

2 3

Re: Multiple user attributes in LDAP userdb query strings
by Oucheou Hassan 17 Jan '24

17 Jan '24

Merci Merci

1 0

recipient delimiter option in dovecot
by André Rodier 17 Jan '24

17 Jan '24

Hello, all. Postfix allows me to configure multiple characters to be used as recipient delimiter. However, I don't see that in dovecot, it seems I can only use one character in recipient_delimiter ? Am I right ? Does dovecot would only let me use email+box(a)domain.com, or can I use other forms, for instance email~box(a)domain.com and email&box(a)domain.com ? Thanks. André -- 𝓐𝓡 - 𝐴𝑛𝑑𝑟𝑒 𝑅𝑜𝑑𝑖𝑒𝑟

2 1

Virtual folder with custom flags
by Kirill Korinsky 15 Jan '24

15 Jan '24

Greetings, I can't figure out how doesn it possible to create a virtual folder which contains mails which has falgs: \Flagged or any customers flag. For example I do have a test mail: mx2$ doas doveadm fetch -u kirill(a)korins.ky "mailbox flags" mailbox-guid fb9e821c7b778b658896000079e31c01 uid 67096 mailbox: Archive flags: \Flagged \Seen $NotJunk NotJunk $MailFlagBit0 $MailFlagBit2 Invoice mx2$ and virtual folder: mx2$ cat /etc/dovecot/virtual/Flagged/dovecot-virtual * -INBOX/Trash -INBOX/Trash/* -INBOX/Junk -INBOX/Junk/* flagged mx2$ If I unset flag \Flagged from that mail, it dissapear from the folder. So, how should I change definition to keep it here if it has user's specified flags like Invoice or ASAP or whatsoever? -- wbr, Kirill

2 1

Quota clone plugin - initial population of data
by John Fawcett 15 Jan '24

15 Jan '24

Hi while responding on a previous thread, I noticed in the documentation: https://doc.dovecot.org/configuration_manual/quota_clone_plugin/ "For example you might want to access everybody’s quota via Redis ... but you don’t store the Redis database permanently so it could become empty once in a while. " It aslo seems that the quota clone plugin propagates only quota changes. Putting both of these points together, you'll going to have missing quotas in redis if it is restarted. It will gradually get populated but only on basis of mailbox changes. Maybe there should be an initial load of all the quotas when dovecot starts, or could that be a performance issue? Maybe even doveadm quota recalc should propagate or contain an option to propage quotas so that even if it can't be done on dovecot startup, at least it can be done on demand by the administrator. John

1 0

ARM support
by Brad Koehn 15 Jan '24

15 Jan '24

Hey there, I was wondering if you’re planning to support ARM in your packages and/or Docker images. Right now I’m stuck on whatever ships with Debian for ARM64 architectures. Otherwise, suggestions how would I go about building them myself? In a modern build world, it’s fairly straightforward, especially with Docker to handle all the emulation. Thanks for such a great product! I’ve used Dovecot on my little server for over twenty years. — Brad Koehn Hey there, I was wondering if you’re planning to support ARM in your packages and/or Docker images. Right now I’m stuck on whatever ships with Debian for ARM64 architectures. Otherwise, suggestions how would I go about building them myself? In a modern build world, it’s fairly straightforward, especially with Docker to handle all the emulation. Thanks for such a great product! I’ve used Dovecot on my little server for over twenty years. — Brad Koehn

8 15

Custom map for quota
by Matt 15 Jan '24

15 Jan '24

Hi, I'm trying to setup quota with the following layout CREATE TABLE "domain" ( "id" INTEGER, "name" TEXT, "active" INTEGER DEFAULT 0, PRIMARY KEY("id"), UNIQUE("name") ) CREATE TABLE "address" ( "id" INTEGER, "localpart" TEXT NOT NULL, "domain_id" INTEGER NOT NULL, PRIMARY KEY("id"), UNIQUE("localpart","domain_id") ) CREATE TABLE "mailbox" ( "id" INTEGER, "address_id" INTEGER, "active" INTEGER DEFAULT 0, "password" TEXT, "quota_bytes" INTEGER DEFAULT 0, PRIMARY KEY("id") ) As I like to update the quota and I like to use a dict/map I'm not sure if I can update this following: map { pattern = priv/quota/storage table = maibox value_field = dummy fields { value_field = quota_bytes id = mailbox_id } mailbox_id will be queried using password_query using: "mailbox.id as mailbox_id" Using such map I hope to be able to use: SELECT quota_bytes FROM mailbox WHERE id = '$mailbox_id' INSERT INTO mailbox (quota_bytes) VALUES ('$value') ON DUPLICATE KEY UPDATE quota_bytes='$value' Can someone help me with this ? Hi, I'm trying to setup quota with the following layout CREATE TABLE "domain" ( "id" INTEGER, "name" TEXT, "active" INTEGER DEFAULT 0, PRIMARY KEY("id"), UNIQUE("name") ) CREATE TABLE "address" ( "id" INTEGER, "localpart" TEXT NOT NULL, "domain_id" INTEGER NOT NULL, PRIMARY KEY("id"), UNIQUE("localpart","domain_id") ) CREATE TABLE "mailbox" ( "id" INTEGER, "address_id" INTEGER, "active" INTEGER DEFAULT 0, "password" TEXT, "quota_bytes" INTEGER DEFAULT 0, PRIMARY KEY("id") ) As I like to update the quota and I like to use a dict/map I'm not sure if I can update this following: map { pattern = priv/quota/storage table = maibox value_field = dummy fields { value_field = quota_bytes id = mailbox_id } mailbox_id will be queried using password_query using: "mailbox.id as mailbox_id" Using such map I hope to be able to use: SELECT quota_bytes FROM mailbox WHERE id = '$mailbox_id' INSERT INTO mailbox (quota_bytes) VALUES ('$value') ON DUPLICATE KEY UPDATE quota_bytes='$value' Can someone help me with this ?

3 3

Panic: file index-search-result.c: line 132 (index_search_result_update_flags): assertion failed: (result->search_args->args == &search_arg)
by Markus Doits 14 Jan '24

14 Jan '24

Hello dovecot community, I hope you can help me with the following panic: --- Panic: file index-search-result.c: line 132 (index_search_result_update_flags): assertion failed: (result->search_args->args == &search_arg) Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x46) [0x7f839a045846] -> /usr/lib/dovecot/libdovecot.so.0(backtrace_get+0x22) [0x7f839a045962] -> /usr/lib/dovecot/libdovecot.so.0(+0x10d81b) [0x7f839a05281b] -> /usr/lib/dovecot/libdovecot.so.0(+0x10d8b7) [0x7f839a0528b7] -> /usr/lib/dovecot/libdovecot.so.0(+0x5e2e2) [0x7f8399fa32e2] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x518a4) [0x7f839a1768a4] -> /usr/lib/dovecot/modules/lib20_virtual_plugin.so(virtual_storage_sync_init+0x274e) [0x7f8399ea4a9e] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x5c) [0x7f839a192f9c] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync+0x39) [0x7f839a193039] -> /usr/lib/dovecot/libdovecot-storage.so.0(index_storage_get_status+0x37) [0x7f839a210467] -> /usr/lib/dovecot/modules/lib20_virtual_plugin.so(+0xc6c5) [0x7f8399e9f6c5] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(+0x145e2) [0x7f8399ee65e2] -> /usr/lib/dovecot/modules/lib01_acl_plugin.so(+0x10cb9) [0x7f8399f31cb9] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_get_status+0x64) [0x7f839a1935a4] -> dovecot/imap(imap_status_get+0x98) [0x55c63c180748] -> dovecot/imap(cmd_status+0x19e) [0x55c63c170a7e] -> dovecot/imap(command_exec+0xa4) [0x55c63c177444] -> dovecot/imap(+0x22392) [0x55c63c175392] -> dovecot/imap(+0x22444) [0x55c63c175444] -> dovecot/imap(client_handle_input+0x1bd) [0x55c63c17589d] -> dovecot/imap(client_input+0x74) [0x55c63c175e64] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x6d) [0x7f839a06903d] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0x13a) [0x7f839a06a7aa] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x54) [0x7f839a0690e4] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0x7f839a0692a0] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x17) [0x7f8399fd9ad7] -> dovecot/imap(main+0x570) [0x55c63c166d20] -> /lib/x86_64-linux-gnu/libc.so.6(+0x29d90) [0x7f8399c29d90] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x80) [0x7f8399c29e40] -> dovecot/imap(_start+0x25) [0x55c63c166de5] Fatal: master: service(imap): child 793983 killed with signal 6 (core dumped) --- Happening on ubuntu 22.04, dovecot 2.3.21 from [this ubuntu ppa](https://launchpad.net/~patrickdk/+archive/ubuntu/production/+packages?… dovecot-core:amd64 1:2.3.21-0a~jammy dovecot-dev:amd64 1:2.3.21-0a~jammy dovecot-imapd:amd64 1:2.3.21-0a~jammy dovecot-ldap:amd64 1:2.3.21-0a~jammy dovecot-lmtpd:amd64 1:2.3.21-0a~jammy dovecot-sieve:amd64 1:2.3.21-0a~jammy dovecot-solr:amd64 1:2.3.21-0a~jammy --- I have this virtual mailbox configured: namespace { prefix = _/ separator = / location = virtual:~/Maildir/virtual:LAYOUT=maildir++:INDEX=~/Maildir/virtual } When I remove this mailbox, the error goes away - so it seems to be something with the virtual mailbox. As the fts provider I use [fts_flatcurve](https://slusarz.github.io/dovecot-fts-flatcurve), maybe this has something to do with it? Any help appreciated how to debug this further and maybe fix it. Thanks!

3 3

execute: /user/bin/checkpassword /user/libexec/dovecot/checkpassword-reply
by Steve Button 14 Jan '24

14 Jan '24

Hi, I have recently moved a dovecot installation from 2.2.36 on RHEL7.9 onto 2.3.20 on Amazon Linux 2023 and I'm now seeing the error message in the title relating to /usr/bin/checkpassword (which doesn't exist on either). This is a project that I've inherited, and I've never used dovecot previously. I've been searching around for a couple of days trying to figure this out. Running out of ideas. Here's a slightly redacted snippet from dovecot.log Jan 04 17:23:22 auth: Debug: checkpassword(redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): Performing passdb lookup Jan 04 17:23:22 auth: Debug: checkpassword(redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): execute: /usr/bin/checkpassword /usr/libexec/dovecot/checkpassword-reply Jan 04 17:23:22 auth: Fatal: execv(/usr/bin/checkpassword) failed: No such file or directory Jan 04 17:23:22 auth: Debug: checkpassword(redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): Received input: Jan 04 17:23:22 auth: Debug: checkpassword(redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): exit_status=84 Jan 04 17:23:22 auth: Error: checkpassword(redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): Child 106455 exited with status 84 Jan 04 17:23:22 auth: Debug: checkpassword(redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): Finished passdb lookup Jan 04 17:23:22 auth: Debug: auth(redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): Auth request finished Jan 04 17:23:24 auth: Debug: client passdb out: FAIL 1 user=redacted(a)redacted.redacted.local code=temp_fail Jan 04 17:23:24 imap-login: Info: Disconnected: Connection closed (auth service reported temporary failure): user=redacted(a)redacted.redacted.local, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured, session=<6uwL/SEOzpt/AAAB> Jan 04 17:23:24 auth: Debug: auth client connected (pid=106456) Jan 04 17:23:24 auth: Debug: client in: AUTH 1 PLAIN service=imap secured session=R5kq/SEO0Jt/AAAB lip=127.0.0.1 rip=127.0.0.1 lport=143 rport=39888 As part of the build process we overwrite the config files with ones which are presumably from a previous version. In particular there's an auth.conf file which contains :- !include auth-checkpassword.conf.ext and in turn that file contains the stanza :- passdb { driver = checkpassword args = /usr/bin/checkpassword } which is where I guess the problem lies. The thing is the config files are almost identical on both systems. Here's the dovecot -n output... [root@server dovecot]# dovecot -n # 2.3.20 (xyz675d): /etc/dovecot/dovecot.conf # OS: Linux 6.1.61-85.141.amzn2023.x86_64 x86_64 ext4 # Hostname: server...1a97d auth_debug = yes auth_verbose = yes disable_plaintext_auth = no first_valid_gid = 0 first_valid_uid = 0 listen = * log_path = /var/project/log/dovecot/dovecot.log mail_location = maildir:/var/mail/vhosts/%d/%n mail_privileged_group = mail mbox_write_locks = fcntl passdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } passdb { args = /usr/bin/checkpassword driver = checkpassword } protocols = imap service auth { unix_listener auth-userdb \{ group = postfix mode = 0600 user = postfix } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = # hidden, use -P to show it userdb { args = uid=vmail gid=vmail home=/var/mail/vhosts/%d/%n driver = static } userdb { driver = prefetch } Hi, I have recently moved a dovecot installation from 2.2.36 on RHEL7.9 onto 2.3.20 on Amazon Linux 2023 and I'm now seeing the error message in the title relating to /usr/bin/checkpassword (which doesn't exist on either). This is a project that I've inherited, and I've never used dovecot previously. I've been searching around for a couple of days trying to figure this out. Running out of ideas. Here's a slightly redacted snippet from dovecot.log Jan 04 17:23:22 auth: Debug: checkpassword (redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): Performing passdb lookup Jan 04 17:23:22 auth: Debug: checkpassword (redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): execute: /usr/ bin/checkpassword /usr/libexec/dovecot/checkpassword-reply Jan 04 17:23:22 auth: Fatal: execv(/usr/bin/checkpassword) failed: No such file or directory Jan 04 17:23:22 auth: Debug: checkpassword (redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): Received input: Jan 04 17:23:22 auth: Debug: checkpassword (redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): exit_status=84 Jan 04 17:23:22 auth: Error: checkpassword (redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): Child 106455 exited with status 84 Jan 04 17:23:22 auth: Debug: checkpassword (redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): Finished passdb lookup Jan 04 17:23:22 auth: Debug: auth (redacted(a)redacted.redacted.local,127.0.0.1,<6uwL/SEOzpt/AAAB>): Auth request finished Jan 04 17:23:24 auth: Debug: client passdb out: FAIL 1 user=redacted(a)redacted.redacted.local code=temp_fail Jan 04 17:23:24 imap-login: Info: Disconnected: Connection closed (auth service reported temporary failure): user=redacted(a)redacted.redacted.local, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured, session=<6uwL/SEOzpt/AAAB> Jan 04 17:23:24 auth: Debug: auth client connected (pid=106456) Jan 04 17:23:24 auth: Debug: client in: AUTH 1 PLAIN service=imap secured session=R5kq/SEO0Jt/AAAB lip=127.0.0.1 rip=127.0.0.1 lport=143 rport=39888 As part of the build process we overwrite the config files with ones which are presumably from a previous version. In particular there's an auth.conf file which contains :- !include auth-checkpassword.conf.ext and in turn that file contains the stanza :- passdb { driver = checkpassword args = /usr/bin/checkpassword } which is where I guess the problem lies. The thing is the config files are almost identical on both systems. Here's the dovecot -n output... [root@server dovecot]# dovecot -n # 2.3.20 (xyz675d): /etc/dovecot/dovecot.conf # OS: Linux 6.1.61-85.141.amzn2023.x86_64 x86_64 ext4 # Hostname: server...1a97d auth_debug = yes auth_verbose = yes disable_plaintext_auth = no first_valid_gid = 0 first_valid_uid = 0 listen = * log_path = /var/project/log/dovecot/dovecot.log mail_location = maildir:/var/mail/vhosts/%d/%n mail_privileged_group = mail mbox_write_locks = fcntl passdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } passdb { args = /usr/bin/checkpassword driver = checkpassword } protocols = imap service auth { unix_listener auth-userdb \{ group = postfix mode = 0600 user = postfix } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = # hidden, use -P to show it userdb { args = uid=vmail gid=vmail home=/var/mail/vhosts/%d/%n driver = static } userdb { driver = prefetch }

2 1

Unconfigurable 500 ms debounce on IMAP IDLE notifications
by Alex 14 Jan '24

14 Jan '24

Hello all, I have been investigating the reason for high end-to-end email delivery delay (>1 second to send a message to echo bot and receive a reply back) on a Postfix+Dovecot email server setup used to run the tests for Delta Chat core [1]. It appeared that most of the time was spent between the submission SMTP service accepting the mail for delivery and receiving an IDLE wakeup on the other side. Looking into the Dovecot source code, I found that all notifications from the storage to callbacks set up by IDLE are delayed by a debounce constant NOTIFY_DELAY_MSECS [2]. It appears to have been added in 2009 [3], but even before that Dovecot was only delivering notifications when a second-resolution timer is changed by at least 1, so IDLE notifications probably were delayed by half a second on average even before that. Commit message says "If the notification is done immediately, IDLE may not notice the change because it's not finished yet." This sounds like a workaround for some internal Dovecot bug. I have nevertheless tried to compile Dovecot with this constant reduced from 500 ms to 1 ms [4] and it resulted in exceptionally fast delivery without any problems caused to the Delta Chat core online test suite which is using this Postfix+Dovecot server accounts. We are running all the tests against this server and it appears to work fine. Round trip time for sending a message to an echo bot and receiving a reply back is reduced from 1.1 s to 0.2 s, which is easily visible in a chat app [5]. I wonder if this debounce delay was added as a workaround for an internal Dovecot bug or a client bug and is not necessary anymore. It does not seem to be useful for well-behaving clients because if necessary the client may debounce notifications on its side and postpone interrupting IDLE with "DONE". I would actually like to disable this delay completely on our server setup [6], as for chat it is common to receive multiple messages in a short period of time, e.g. when sending a message to a group and receiving multiple read receipts from currently active users. [1] https://github.com/deltachat/deltachat-core-rust/ [2] https://github.com/dovecot/core/blob/93a53a9d590f0220de28600f36a969cc38c314… [3] https://github.com/dovecot/core/commit/56fb5d09955b6097f77b341717fd9b70e9f1… [4] https://github.com/deltachat/chatmail/issues/72#issuecomment-1806645153 [5] https://delta.chat/assets/blog/nine-echo.mp4 [6] https://github.com/deltachat/chatmail Best regards, Alex

2 6

Lots of "dovecot: auth: Error: auth client 0 disconnected with 1 pending requests: EOF" errors in error.log
by Jay Sladojevic 14 Jan '24

14 Jan '24

I've recently upgraded to dovecot 2.3 and now my error.log is full of this message: dovecot: auth: Error: auth client 0 disconnected with 1 pending requests: EOF In earlier versions, this error was logged at a warning level. What is the rationale behind the elevation to error log level? May I suggest to revert this change? (fyi: the code in question is in /src/auth/auth-client-connection.c) static void auth_client_disconnected(struct auth_client_connection **_conn) { struct auth_client_connection *conn = *_conn; unsigned int request_count; int err; *_conn = NULL; if (conn->input->stream_errno != 0) err = conn->input->stream_errno; else if (conn->output->stream_errno != 0) err = conn->output->stream_errno; else err = 0; request_count = conn->request_handler == NULL ? 0 : auth_request_handler_get_request_count(conn->request_handler); if (request_count > 0) { e_error(conn->event, "auth client %u disconnected with %u " "pending requests: %s", conn->pid, request_count, err == 0 ? "EOF" : strerror(err)); } auth_client_connection_destroy(&conn); }

1 0

Redirects 550'd So why no SRS method
by Laura Steynes 05 Jan '24

05 Jan '24

Happy New Year! Now to Aki, Timo, Corr, why, when setting up mail forwarding, is sieve not automatically configuring rules for SRS, it has this ability for long time, yet dovecots sieve based forwarding just creates a plain old redirect "forward" resulting in,in 2024, 99% of forwarded emails getting rejected for failing SPF because it's not enabling the require or the rules needed for successful sender rewriting. Is this an oversight? and I suppose the bigger question is, when is it planned to be corrected to using SRS method? Happy New Year! Now to Aki, Timo, Corr, why, when setting up mail forwarding, is sieve not automatically configuring rules for SRS, it has this ability for long time, yet dovecots sieve based forwarding just creates a plain old redirect "forward" resulting in,in 2024, 99% of forwarded emails getting rejected for failing SPF because it's not enabling the require or the rules needed for successful sender rewriting. Is this an oversight? and I suppose the bigger question is, when is it planned to be corrected to using SRS method?

3 2

Piegonhole behaviour when redirect fails
by Aubry Jaquier 04 Jan '24

04 Jan '24

Hello, I noticed an unusual behavior of the implicit keep from pigeonhole when a redirect fails in a sieve script. For instance, with the sieve below, if the relay host is unavailable, dovecot will not accept the email and will respond with a tempfail. redirect "myaddress(a)domain.com"; stop; But if my sieve script has a fileinto inside (see the example below), dovecot will accept the message, copy the email in the INBOX and in the folder from the fileinto and write the following log "Execution of script filter.sieve failed, but implicit keep was successful" fileinto "Folder"; redirect "myaddress(a)domain.com"; stop; According to the RFC 5228, section 2.10.2 Implicit keep, the last example should not trigger an implicit keep but act like the first example. An implicit keep is performed if a message is not written to a mailbox, redirected to a new address, or explicitly thrown out. That is, if a fileinto, a keep, a redirect, or a discard is performed, an implicit keep is not. Does it look like a bug to you, or is this the intended behaviour ? Best regards, Aubry Hello, I noticed an unusual behavior of the implicit keep from pigeonhole when a redirect fails in a sieve script. For instance, with the sieve below, if the relay host is unavailable, dovecot will not accept the email and will respond with a tempfail. redirect "myaddress(a)domain.com"; stop; But if my sieve script has a fileinto inside (see the example below), dovecot will accept the message, copy the email in the INBOX and in the folder from the fileinto and write the following log "Execution of script filter.sieve failed, but implicit keep was successful" fileinto "Folder"; redirect "myaddress(a)domain.com"; stop; According to the RFC 5228, section 2.10.2 Implicit keep, the last example should not trigger an implicit keep but act like the first example. An implicit keep is performed if a message is not written to a mailbox, redirected to a new address, or explicitly thrown out. That is, if a fileinto, a keep, a redirect, or a discard is performed, an implicit keep is not. Does it look like a bug to you, or is this the intended behaviour ? Best regards, Aubry

2 1

Autocreate virtual users' home directory?
by John Fawcett 04 Jan '24

04 Jan '24

Hi I have recently rectified an old configuration error whereby I had virtual users' home and mail directories set to the same value. I used option 3 from "ways to set up home directory" https://doc.dovecot.org/configuration_manual/home_directories_for_virtual_u… so I have: home= |/var/vmail/domain/user/home/| mail= |/var/vmail/domain/user/| |where domain and user are substituted for the real domain and user.| For existing users where I created the home directory when migrating the settings, there is no issue. But I am seeing errors like this for new users: lmtp(test(a)example.com)<125035><EHDOAyS1lWVr6AEAjpgUYA>: Error: autoexpunge: Couldn't create dovecot.autoexpunge.lock lock: file_create_locked(/var/vmail/example.com/test@example.com/home//dovecot.au… failed: safe_mkstemp(/var/vmail/example.com/test@example.com/home//dovecot.autoexpu… failed: No such file or directory Seems that differently to mail directory which is automatically created, the home directory is not created. I couldn't see any config setting that would autocreate home directories (where home directories are subdirectories of mail directories). Would it be worthwhile introducing an autocreate option for home directories? John Hi I have recently rectified an old configuration error whereby I had virtual users' home and mail directories set to the same value. I used option 3 from "ways to set up home directory" https://doc.dovecot.org/configuration_manual/ home_directories_for_virtual_users/ so I have: home= /var/vmail/domain/user/home/ mail= /var/vmail/domain/user/ where domain and user are substituted for the real domain and user. For existing users where I created the home directory when migrating the settings, there is no issue. But I am seeing errors like this for new users: lmtp(test(a)example.com)<125035><EHDOAyS1lWVr6AEAjpgUYA>: Error: autoexpunge: Couldn't create dovecot.autoexpunge.lock lock: file_create_locked(/var/vmail/ example.com/test@example.com/home//dovecot.autoexpunge.lock) failed: safe_mkstemp(/var/vmail/example.com/test@example.com/home// dovecot.autoexpunge.lock) failed: No such file or directory Seems that differently to mail directory which is automatically created, the home directory is not created. I couldn't see any config setting that would autocreate home directories (where home directories are subdirectories of mail directories). Would it be worthwhile introducing an autocreate option for home directories? John

2 2

Solr/Tika patches for dovecot 2.3.21
by John Fawcett 03 Jan '24

03 Jan '24

Hi I've just made updated versions of 3 patches against the latest release 2.3.21 in case they are useful to someone or might get considered for official inclusion. John *dovecot-2.3.21-tika-http-auth.patch* Allows specification of username and password in the fts_tika setting for basic auth against tika server. For example fts_tika = https://user:password@tika_server:443/tika *dovecot-2.3.21-solr-max-size.patch * This is a simplified version of my previous patch. Sets a size limit (configuration fts_max_size) on message bodies that are to be indexed. Message bodies for messages larger than fts_max_size are not sent to solr. Defaults to zero which means no limit. For example fts_max_size = 10M *dovecot-2.3.21-solr-max-rows.patch * When dovecot sends a search to solr it uses the rows parameter. For multiple mailbox search the value used is SOLR_MAX_MULTI_ROWS , hardcoded to 100000. For single mailbox search the value is uidnext. This patch introduces an upper limit for single mailbox search using the same value as SOLR_MAX_MULTI_ROWS, while leaving the existing functionality of sending the uidnext value if it is smaller. This is just to place a more reasonable upper bound since uidnext can get much larger. Hi I've just made updated versions of 3 patches against the latest release 2.3.21 in case they are useful to someone or might get considered for official inclusion. John dovecot-2.3.21-tika-http-auth.patch Allows specification of username and password in the fts_tika setting for basic auth against tika server. For example fts_tika = https://user:password@tika_server:443/tika dovecot-2.3.21-solr-max-size.patch This is a simplified version of my previous patch. Sets a size limit (configuration fts_max_size) on message bodies that are to be indexed. Message bodies for messages larger than fts_max_size are not sent to solr. Defaults to zero which means no limit. For example fts_max_size = 10M dovecot-2.3.21-solr-max-rows.patch When dovecot sends a search to solr it uses the rows parameter. For multiple mailbox search the value used is SOLR_MAX_MULTI_ROWS , hardcoded to 100000. For single mailbox search the value is uidnext. This patch introduces an upper limit for single mailbox search using the same value as SOLR_MAX_MULTI_ROWS, while leaving the existing functionality of sending the uidnext value if it is smaller. This is just to place a more reasonable upper bound since uidnext can get much larger.

2 2

how to take mdbox extract of time interval and restore that again?
by lutz.niederer＠gmx.net 03 Jan '24

03 Jan '24

Hi! Due to a fatal hardware error we have to extract data of all existing imap accounts and all their boxes/folders etc. from an mdbox store starting with the 5th of december until today. Then we have to restore the old system and import the data back into it. Mail before 5th will come from the system backup, newer mail from that export. After that it may be possible that some/few mails may exist twice in the boxes, but that's ok. 1. What would be the command line for doveadm to extract everything starting the 5th? I find that the command line for doveadm is pretty complicated. I tried but I am not sure if I really got all mails exported. So I would like to ask if someone with much more experience can give me a command line that surely does what we want. The command will be run from a remote machine. 2. And what would be the command line to restore all the mails that we have exported back into the system? (The folder and account structure is the same.) 3. After that some of the mails may exist twice. Is that a problem, maybe because of internal IDs? 4. Are there any other things we need to be aware of when doing that? I thank you very much for your help! Cheers! -lutzn

2 1

Broken Docs
by Peter 02 Jan '24

02 Jan '24

The page: https://doc.dovecot.org/configuration_manual/protocols/lmtp_server/ ... has links to the old dovecot wiki which are now broken, specifically the Postfix and Exim links at the bottom of the page. Can someone please port those pages over to the docs and fix the links? Peter

2 1

Certificate of the documentation site (https://doc.dovecot.org/)
by gileh13242＠vasteron.com 02 Jan '24

02 Jan '24

Hey ! Your certificate expired today, I can't access it because of my business proxy :). [No Error] (TLS code: X509_V_ERR_CERT_HAS_EXPIRED) SSL Certificate expired on: Jan 2 06:31:02 2024 GMT Have a nice day !

2 1